g match these phrases with the correct description group of answer choices black body radiation [ choose ] photon [ choose ] spectroscopy [ choose ] light [ choose ]

A student has four pieces of a substance in different shapes and sizes , place the pieces on a mass balance, one at a time and record the mass of each. Submerge the pieces one at a time in a graduated cylinder filled with a volume of water and record the volume change.

A mass balancing is a method of accounting for all of the materials used in a process. The input, output, as well as distribution of a substance amongst streams in such a process or stage are all considered in mass balance.

Mass balancing is a crucial method for phasing out fossil raw materials on a broad scale, with both the goal of achieving a fully transformed chemical industry. Mass balance facilitates a gradual transition to using recycled and/or renewable feed supply.

Therefore, the correct answer will be option (a).

To know more about mass balance

https://brainly.com/question/24971098

#SPJ4

The mass of air with the given specification in kilograms of the air in a room is 286.0165 kg/m³.

A huge volume of atmospheric air that is largely uniform in temperature and moisture is known as an air mass. Air masses can travel tens of thousands of kilometers in any direction and go as high as the stratosphere. The unit of dynamic mass per time known as mass flow is grams per minute (g/min). It is possible to calculate an exact mass flow by comparing a volumetric flow (cm3/min) to its known temperature and pressure.

Given:

Convert the units of feet into meters:

1 foot=12 inches, 1inch-2.54 cm, 100 cm=1m

28.0 feet = 8.5344 m

32.0 feet = 9.753 m

9.5 feet = 2.895 m

Volume= 8.53 × 9.75 × 2.89 or 240.35 m³

mass of air= 1.19g/0.001 m³ × 240.35 or 286.0165 kg/m³

mass of air = 286.0165 kg/m³

To learn more about mass of air, visit:

https://brainly.com/question/13410461

#SPJ1

1. Potassium bromide (KBr)

2. Iodomethane (CH3I)

3. Acetylene (C2H2)

The boiling point of a compound is determined by the strength of the intermolecular forces between its molecules. Potassium bromide has the strongest intermolecular forces, as it is an ionic compound composed of positively charged potassium ions and negatively charged bromide ions. These ions are held together by electrostatic forces, which are stronger than the other types of intermolecular forces.

Iodomethane has a higher boiling point than acetylene because it has a polar covalent bond and can form dipole-dipole interactions between its molecules. Acetylene, on the other hand, is a nonpolar compound and only experiences London dispersion forces between its molecules. These forces are weaker than the dipole-dipole interactions in iodomethane.

To learn more about compounds:

https://brainly.com/question/26487468

#SPJ4

The number of moles in 377.64 grams of tungsten is 2.005 moles.

The number of moles in a substance can be calculated by dividing the mass of the substance by its molar mass as follows:

no of moles = mass ÷ molar mass

According to this question, Sharla finds a container labeled tungsten. She removes the metal and weighs it and determines the mass is 377.64 grams of tungsten.

Molar mass of tungsten = 183.84g/mol

moles = 377.64g ÷ 183.84g/mol

moles = 2.005 moles

Therefore, 2.005 moles is the number of moles in 377.64g of tungsten.

Learn more about moles at: https://brainly.com/question/26416088

#SPJ1

If the shattered glassware is not noticed, there could be potential injury to the janitorial crew. So, clean broken glassware, melting point capillaries, pipets or glass test tubes should always be discarded in the broken glass box. So, option C is correct.

This lab safety advice aims to prevent and/or reduce accidents from broken glass when handling lab glassware.

It is acceptable to collect broken glass that is not contaminated with chemicals, infectious elements, or other dangerous items in certified broken glass bins or 5-gallon buckets with covers.

To reduce the chance of getting hurt, always pick up shattered glass with a brush and dustpan, tongs, or forceps and put it into a receptacle meant for throwing away broken glass. Broken glass must never be handled with care and must never be disposed of in regular trash. There are numerous vendors who sell glass disposal boxes. These containers include a plastic liner for disposing of wet glasses and a lid with a built-in cardboard flap to close the container when it is full.

To know more about lab safety advice

brainly.com/question/28323945

#SPJ4

The complete question is:

Choose the one best response for why you discard clean broken glassware, melting point capillaries, pipets or glass test tubes in the broken glass box and not in the regular trash can.

a) Glassware could still have chemical residues that need to be properly disposed of.

b) If shattered glass is thrown away with regular trash, the stockroom cannot charge for it.

c) If the shattered glassware is not noticed, there could be potential injury to the janitorial crew.

d) Glasses could still contain chemical traces that need to be properly disposed of.

Mass is conserved in chemical reactions and shown by balanced equations.

What is mass?

Mass is a property of matter that describes the amount of matter in an object. It is related to the amount of atoms, molecules, or ions that are present in an object. Mass is often measured in kilograms or grams. Different substances have different masses, due to their different chemical compositions. Mass is an important property in chemistry, as it is used to calculate the amount of a certain substance that is present in a given volume.

Therefore, Mass is conserved in chemical reactions and shown by balanced equations.

To learn more about Mass

Here: htps://brainly.com/question/1838164

#SPJ1

Move to the safety shower if you spill hazardous chemicals on your skin. Stand under the shower and pull the lever. Remove clothing and continue flushing the area for at least 20 minutes.

If you get hazardous chemicals on your skin, you should go to the nearest safety shower right away.

In the event of a spill, the safety shower is a device that is specifically designed to flush chemicals from the skin and clothing.

When you reach the safety shower, stand beneath it and pull the lever to turn on the water flow.

It is critical to remove any contaminated clothing while showering to ensure that all of the chemicals are washed away.

Flush the affected area for at least 20 minutes to ensure that all chemicals have been removed. It is critical to follow these procedures to reduce the risk of injury or chemical exposure.

To know more about Hazardous chemicals,

https://brainly.com/question/30156449

#SPJ4

The bubble's volume right before it reaches the surface is 23.6 cm³, and let's assume that its temperature is the same as the surrounding water's. You can think of the bubble's air as an ideal gas.

n=p₁V₁/RT₁=(p₀+ρgd)V₁/RT₁

p₁/RT₁=p₂V₂/RT₂

∴V₂=p₁V₁T₂/p₂T₁=(p₀+ρgh)V₁T₂/p₀T₁

= (1.01×10⁵+10³×10×35)(5)(273+20)/1.01×10⁵(273+4)

=23.6 cm³

A theoretical gas called an ideal gas is one that has lots of point particles flying around arbitrarily and not being affected by other particles. The ideal gas notion is advantageous because it complies with the ideal gas law, a condensed equation of state, and is amenable to statistical mechanics analysis. It is frequently possible to loosen the need for zero interaction, for instance, if the interaction is totally elastic or is thought of as point-like collisions.

Many real gases behave qualitatively like an ideal gas, where the gas molecules (or atoms for monatomic gases) take on the function of the ideal particles, under varied conditions of temperature and pressure. Numerous gases, including air mixes and heavier gases including carbon dioxide, nitrogen, oxygen, and hydrogen.

Learn more about ideal gas here:

https://brainly.com/question/8711877

#SPJ4

The pressure of the gas mixture when it is contained in a 3.00 liter flask at 127˚C is 0.926 atm.

To calculate the pressure of the gas mixture produced by the combustion of the compound, we can use the ideal gas law PV = nRT.

Given:

We can calculate the moles of gas produced by the combustion reaction by using the balanced equation for the combustion of the compound with oxygen.

Given that 1 mole of CO2 and 2 moles of H2O is produced.

Total moles of gas produced = 0.024 + 0.048 = 0.072 moles

Plugging in the values we get:

So, the pressure of the gas mixture when it is contained in a 3.00 liter flask at 127˚C is 0.926 atm.

This question is incomplete and should be provided as:

Learn more about combustion reaction here: brainly.com/question/13251946

#SPJ4

Answer:

The mass of the solid sample is 4.442 g (5.853 g - 1.411 g).

Explanation:

The mass of the solid sample can be determined by subtracting the mass of the weigh boat from the mass of the weigh boat and sample. This is because the weigh boat is a constant and known value, and it is used as a reference to measure the mass of the sample. To find the mass of the sample, we use the formula:

Mass of sample = Mass of weigh boat and sample - Mass of weigh boat

In this scenario:

Mass of sample = 5.853 g - 1.411 g = 4.442 g

Therefore, the mass of the solid sample is 4.442 g.

In an ecosystem , the atmosphere compares to a global blanket surrounding it.

Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.

Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .Living organisms also influence the quantity of biomass present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.

Learn more about ecosystem,here:

https://brainly.com/question/13979184

#SPJ1

The type of atomic orbital that the lone pair occupies is  an sp² hybridization atomic orbital.

When two atomic orbitals join to generate a hybrid orbital in a molecule, the energy of the individual atoms' orbitals is redistributed to give orbitals of equivalent energy. We refer to this process as hybridization. The atomic orbitals with equivalent energies are mixed together during the hybridization process, which primarily involves the fusion of two s orbitals, two p orbitals, or the mixing of a s orbital with a p orbital or a d orbital. Hybrid orbitals are the new orbitals that are created in this way. More importantly, hybrid orbitals are very helpful in describing the characteristics of atomic bonds and molecular geometry.

sp hybridization

One s and one p orbital in the same main shell of an atom combine to generate two new equivalent orbitals, which is known as sp hybridization. The newly created orbitals are known as sp hybridised orbitals.

sp² hybridization

sp³ hybridization

25% s character and 75% p character make up each sp3 hybrid orbital.

Learn more about hybridization here :

brainly.com/question/29510593

#SPJ4

Potassium sulfite and water are produced in the reaction between sulfuric acid and potassium hydroxide.

What two h2so3 Koh products result from the reaction?

Potassium hydroxide is a substance that is extremely caustic but incombustible. It is widely used in the production of cleaning products, chemicals, and petroleum refinery. Metals and tissue are both corroded by H2SO3. It has a strong burning sulfuric odor and is a clear liquid.

The net ionic equation, the type of reaction, the product of the reaction between H2SO3 and KOH, and other related topics will all be covered in this article.

H2SO3 + KOH has the following net ionic equation:

OH- = K+ O2 SO32

Follow the procedures listed below to get this net ionic equation:

H2SO3, K2SO3, and KOH, which should be ionized, are strong electrolytes in this reaction.

2K+ + OH- + 2H+ SO32 = 2K+ 2SO32 2H+ 2OH

The net ionic equation should be written down after the spectator ions on both sides have been removed.

Following the cancellation of the spectator ions, the net ionic equation is: OH- = K+ + O2- + SO32-.

To Learn more About  potassium sulfite and water refer To:

brainly.com/question/19060704

#SPJ1

When determining the specific heat from a given metal in a calorimeter the mass of the water remains constant, but the mass of the metal is increased and the equilibrium temperature will b) increases.

The metal is able to conduct or transfer the more heat into the water. If we put the higher massed object into the water as compared to the metal and it will more heat than the smaller piece of metal .

The higher the mass of metal, the more will be the heat. The more will be the heat will metal conducted, and it will increase the temperature of the water, this makes the equilibrium temperature increases.

To learn more about heat here

https://brainly.com/question/11297584

#SPJ4

Assuming that the ideal Brayton cycle begins with isentropic compression, the remaining processes in order to complete the closed-loop Brayton cycle are:

The Brayton cycle is a thermodynamic cycle used to model the operation of a gas turbine engine. In the Brayton cycle, a working fluid is compressed, heated, expanded and cooled in a closed loop. The Brayton cycle is an idealized cycle, and in reality the processes are not completely isentropic, isothermal or adiabatic.

The cycle begins with isentropic compression of the working fluid, where the pressure and temperature of the fluid increase. The working fluid is then heated at constant pressure, and the temperature increases further. The working fluid is then expanded isentropically, converting the heat energy into work. The working fluid is then cooled at constant pressure, and the temperature and pressure decrease. Finally, the working fluid is recompressed isentropically, returning it to the original state. The cycle is then repeated.

Learn more about The Brayton Cycle:

https://brainly.com/question/29410357

#SPJ4

The substituents that are meta directors are NO₂, Cl and CF₃.

In electrophilic substitution reactions in aromatic compounds, the position of the substituent on the ring can affect the rate and outcome of the reaction. Substituents can be classified as ortho, meta, or para directors, depending on their ability to direct the electrophile to specific positions on the ring. Substituents that are meta directors, like NO₂, Cl, and CF₃, have a moderate effect on directing electrophiles to the meta position (the position adjacent to the substituent) on the ring. They have a weaker effect than ortho-para directors but stronger than ortho directors.

To learn more about electrophiles visit: https://brainly.com/question/14803468

#SPJ4

The mass percent of oxygen in the compound lithium phosphate Li₃PO₄ is its ratio of mass to the total mass i.e., 56 %.

Mass percent is a common term used to express the composition and concentration of a compound. The mass percent of an element in a compound is the ratio of its mass in that compound to the total mass of the compound multiplied by 100.

The molar mass of the compound Li₃PO₄ = 113 g

(P = 31 g/mol, Li= 6 g/mol, O= 16 g/mol .)

Atomic mass of O = 16 g/mol

mass of 4 oxygen = 64 g.

Mass percent of O in the compound  = mass of 4 O/total mass

mass %  = 64 g/113 g × 100 = 56%.

Therefore, the mass percent of oxygen in the compound is 56%.

Find more on mass percent :

https://brainly.com/question/9904990

#SPJ1

Option 1 , 2 & 3 are examples of sampling bias. Sampling bias refers to a systematic error that occurs when a sample is not representative of the population from which it is drawn.

Sampling bias refers to a systematic error that occurs when a sample is not representative of the population from which it is drawn. This can happen in a number of ways, but in general, it occurs when the sample is not chosen randomly or when certain groups are underrepresented or overrepresented in the sample.It's important to be aware of these types of sampling bias when designing a study and interpreting the results because they can lead to inaccurate conclusions. To minimize sampling bias, researchers should use random sampling techniques and strive to include a representative sample of the population in their study.

learn more about Sampling bias here:

brainly.com/question/29611745

#SPJ4

Answer:

28.9 moles of KClO3 x (3 moles O2 / 2 moles KClO3) = 43.35 moles of O2

To convert moles to grams, you'll need to use the molar mass of O2, which is 32 g/mol.

43.35 moles x 32 g/mol = 1387.2 g of O2

So from 28.9 moles of KCiO3 , 1387.2 grams of O2 will be formed.

Answer:

Observation and description of a phenomenon or group of phenomena

Formulation of a hypothesis to explain the phenomena

Use of experimentation and/or other forms of data collection to test the hypothesis

Analysis and interpretation of the data collected

Development of a theory or revision of the hypothesis based on the evidence

Repeat the experiment to ensure the results are consistent

Communicate the results to other scientists to have them verify the results.

Explanation:

A: The biodiversity of the pond has decreased.

B: The species richness

Biodiversity is all life on this earth including plants, animals, fungi and microorganisms as well as the various genetic materials they contain and the diversity of the ecological systems in which they live. This includes the relative abundance and genetic diversity of organisms from all habitats, whether on land, sea or other aquatic systems.

Biodiversity can be classified into three levels:

a. Species diversity

Species or types have the meaning, individuals who have morphological, anatomical, physiological similarities and are able to interbreed with each other (inter-hybridization) which produce fertile offspring to continue their generation.

Another example is the diversity of species in coconut trees, palm trees, areca palm trees and also in palm trees.

b. Genetic diversity

Gene diversity is the diversity of individuals within one type of living thing. Gene diversity results in variations between individuals of the same kind. Examples of diversity at this gene level are white roses, red roses, and yellow roses which have differences, namely different in terms of flower color.

c. Ecosystem diversity

Ecosystem can be interpreted as a relationship or mutual interaction between one living thing and another living thing and also between living things and their environment. Every living thing will only grow and develop in a suitable environment.

Your question is incomplete but most probably your full question was:

Directions: Each of the questions or incomplete statements below is followed by five suggested answers or completions. Select the one that is best in each case.

A) A one-hectare pond is sampled in early September. The sample yields 1 small catfish as well as 17 benthic invertebrates that represent 10 species. If the pond is resampled a year later, which of the following would best indicate that the pond had been adversely affected by adjacent development?

B) A one-hectare pond is sampled in early September. The sample yields 1 small catfish as well as 17 benthic invertebrates that represent 10 species. Which of the following can be estimated from the sample for the invertebrates in the pond?

Learn more about incomplete & complete question at

https://brainly.com/question/1494510.

#SPJ4

Enzymes like hexokinase and phosphofructokinase catalyze the conversion of glucose to pyruvate in the glycolytic pathway, which speeds up the metabolism.

Eukaryotes are a class of organisms that have membrane-bound organelles and a genuine nucleus. All multicellular species, including animals, plants, and fungi, as well as some single-celled organisms, such as protozoa and algae, are included in this category.

It is likely that the structure, which is most likely a component of a bigger molecule, is what speeds up the glycolytic pathway in eukaryotes. Enzymes are biological catalysts that speed up chemical reactions by lowering the energy needed for the process to start. Enzymes like hexokinase and phosphofructokinase catalyze the conversion of glucose to pyruvate in the glycolytic pathway, which speeds up the metabolism.

To know more about eukaryotes, visit:

brainly.com/question/4644590

#SPJ4

The particle that will complete this reaction is an isotope of zinc with 30 protons and 64 neutrons.

Isotopes are described as two or more types of atoms that have the same atomic number and position in the periodic table, and that differ in nucleon numbers due to different numbers of neutrons in their nuclei.

There are two main types of isotopes and they include:

In conclusion, there are 254 known stable isotopes.

Learn more about isotopes at: https://brainly.com/question/24698773

#SPJ1

The conversion of 15 kilometers per liter of fuel into miles per gallon is 35.6 miles/ gallon.

Given that :

1 miles = 1.6 km

1 gallon = 3.8 liters

The conversion of 15 kilometers per liter to miles per gallon given as  follows:

(15 kilometers / liter) × ( 1 liter / 1.6 gallon)

= (9.375 kilometers / gallon) × ( 3.8  kilometers / 1 mile )

= 35.625 miles / gallon

Thus, the conversion of kilometer in miles is  35.6 miles/ gallon , if Europeans friends tell you that they are pleased because the new car gives them 15 kilometers per liter of fuel.

​

To learn more about gallon here

https://brainly.com/question/24271138

#SPJ4

Crystal shape: A mineral with an unhindered growth environment may have a particular geometric shape.Color is an easy-to-identify but not necessarily dependable quality; a single mineral may exist in several

Color may have a significant effect on how we feel and perceive things. It has the power to arouse emotions of warmth or coldness, harmony or discord, and even to affect our hunger and mood. Color is utilised in both design and art to provide contrast, balance, and focus points. Color may be used in branding and marketing to evoke connections, communicate a message, or express an emotion. Color may be categorised and described in a variety of ways, such as by hue, saturation, and value. Design, art, and psychology all benefit from an understanding of colour theory, which is the study of colour and its effects. Millions of distinct

Learn more about Color here:

https://brainly.com/question/28325642

#SPJ4

In the nitrogen cycle, nitrogen moves from one sphere to another whereas, in the carbon, cycle carbon moves from one sphere to another.

Photosynthesis and decomposition are important procedures of the carbon cycle. nitrogen cycle Fixation, mineralization, nutrition, and denitrification are the major processes of the nitrogen cycle much of the overlap joining the carbon cycle and the nitrogen cycle occurs in the soil

Faster decomposition of organic carbon makes more nitrogen at hand to plants, helping them take in more CO2 as they grow, lessening the atmospheric levels. This is a negative carbon cycle response. The nitrogen cycle is a repeating cycle of operation during which nitrogen moves through both living and non-living things

So we can conclude that mini atoms of carbon and nitrogen can move around the planet through these cycles.

Learn more about the carbon cycle here: https://brainly.com/question/1194643

#SPJ1

The number of standard days is 2460=86400. There are 86400 seconds in a normal second.

The verb comprise indicates to be made up of or composed of something and is almost typically associated with the preposition "of." Only "yes" and "no" might be used in a contentious exchange. Consist is the term to use when describing anything that is composed of other things. In a molecule, electrons and their bonds are present.

Consist is not a passive verb. ✗ Never mention, "My family consists of four members." be composed of• You state: "My family is composed of four individuals." • You state: "My family is made up of four persons." by means of the progressive

24×60×=86400sone

[tex]\frac{1}{86400}[/tex] days

So, Ratio =  [tex]\frac{Standardsecond}{Frenchsecond}[/tex]=  [tex]10^{-5}/\frac{1}{86400}[/tex]

= 0.864

To know more about consists visit:

https://brainly.com/question/30061922

#SPJ4

The temperature of the object as it is given in the other unit is  105.1 °F.

Temperature is a measure of the amount of thermal energy or heat in a system.

Now we know that to convert from the Celsius to the Fahrenheit temperature that we have to be able to use the formula;

(T°C × 9/5) + 32 = T°F

Then we have that;

T°C  = 40.6

Thus we now have that;

(40.6  × 9/5) + 32 =

= 105.1 °F

Thus the object that we have in the farm is  going to have a new temperature  that we obtain as  105.1 °F

Learn more about temperature:https://brainly.com/question/11464844

#SPJ1

Answer: C

Explanation:

The density if the dinitrogen difluoride gas at the temperature of 30 °C and the pressure of exactly 1 atm is 2.6 g/L.

Given that :

The temperature = 30 °C

The pressure = 1 atm

The ideal gas equation is given as :

P V = n RT

Density = mass / volume

d = m / V

n = mass / molar mass

P V = (d V / M) R T

d = P M / R T

d = (1 × 66) / ( 0.082 × 303)

d = 2.6 g/L

Thus, the density is 2.6 g/L.

This question is incomplete, the complete question is :

Calculate to three significant digits the density of dinitrogen difluoride gas at exactly 30 °C and exactly 1 atm. You can assume dinitrogen difluoride gas behaves as an ideal gas under these conditions

To learn more about density here

https://brainly.com/question/13592228

#SPJ4