Answer:
P = 0.2 W
Explanation:
Given that,
Force, F = 4 N
Displacement, d = 1 m (say)
Time, t = 20 s
We need to find the power output. Power is the rate of doing work. So,
P = W/t
[tex]P=\dfrac{Fd}{t}\\\\P=\dfrac{4\times 1}{20}\\\\P=0.2\ W[/tex]
So, the required power is 0.2 W.
A box is pulled to the right with a force of 65 N at an angle of 58 degrees to the horizontal. The surface is frictionless. The free-body diagram is shown. What is the net force in the x-direction?
Which of the following are not correctly balanced reactions?
Check all that apply.
A. C + Cl2 → CC14
OB. 2K + Br2 + 2KBr
O C. Mg + FeO →2Fe + Mgo
D. C + 02 → CO2
Answer:
B. 2K + Br2 + 2KBr
D. C + 02 → CO2
Explanation:
In balancing a chemical reaction, the number of atoms on both sides of the expression must be the same in order to obey the law of conservation of mass.
According to the law of conservation of mass, in a chemical reaction, matter is neither created nor destroyed.
So, let us investigate:
Number of atoms
Reactants Products
K 2 2
Br 2 2
C + 0₂ → CO₂
C 1 1
O₂ 2 2
We see that for both equations, the number of atoms on both sides of the expression is the same.
During a goal-line stand, a 112-kg fullback moving eastward with a speed of 6 m/s
collides head-on with a 120-kg lineman moving westward with a speed of 8 m/s.
The two players collide and stick together, moving at the same velocity after the
collision. Determine the post-collision velocity of the two players.
Answer:
-1.24 m/s
Explanation:
Total momentum before collision = total momentum after collision
Total momentum before collision = (mass of full back * velocity of fullback) + (mass of lineman * velocity of line man).
Mass of full back = 112 kg, mass of line bag = 120 kg, velocity of full back 6 m/s (east), velocity of line back = -8 m/s (west). Hence:
Total momentum before collision = (112 * 6) + (120 * -8) = 672 - 960 = -288 kgm/s
The total momentum after collision = (mass of full back + mass of line back) * velocity after collision.
Let velocity after collision be v, hence:
The total momentum after collision = (112 + 120)v = 232v
Total momentum before collision = total momentum after collision
-288 = 232v
v = -288 / 232
v = -1.24 m/s
Therefore after collision, the two players would move at a velocity 1.24 m/s west (the same direction as the lineman).
i need help with this question, i’ll mark as Brainliest!!
Answer:
The given Device is a :
SOLENOID.Since at the left corner, The MFL (Magnetic field lines) are entering the solenoid OR terminating at this end, This end turns out to be the SOUTH POLE.
According to the arrows, The current is always in the direction of the magnetic field. So, The current is leaving the Solenoid at the top right corner.
[tex]\rule[225]{225}{2}[/tex]
Hope this helped!
~AH1807Answer:
The name of the device is Solenoid. Left end represents South Pole. The current ( I ) is leaving the wire coil at the top right corner.
Explanation:
Hope you understand....
When does a car show positive acceleration?
Answer:
When it is accelerating or gaining velocity.
Explanation:
A car show positive acceleration when it is accelerating or gaining velocity. It would show negative acceleration if it was de-accelerating, slowing down or coming to a stop.
Answer:
When the velocity is increasing in the positive direction
Explanation:
Willing to give out Brainliest: 3.00 m^3 of water is at 20.0°C If you raise its temperature to 60.0°C, by how much will its volume expand ?
Answer:
The answer is below
Explanation:
Charlee's law states that the volume of a gas is directly proportion to the temperature of the gas at constant pressure. That is:
V = kT, where V = volume and T = temperature, k = constant. Therefore:
V / T = k
[tex]\frac{V_1}{T_1}=\frac{V_2}{T_2}[/tex]
Given that: [tex]V_1=3\ m^3, T_1=20^oC=(20 + 273)K=293\ k,T_2=60^oC=(60 + 273)K=333\ k.\\\\\frac{V_1}{T_1}=\frac{V_2}{T_2}\\\\\frac{3}{293}=\frac{V_2}{333} \\\\V_2=\frac{3}{293}*333\\\\V_2=3.41\ m^3\\[/tex]
The new volume is 3.41 m³. That is it expands by 0.41 m³
Answer:
0.02484
Explanation:
Trust me bro
The coach has not seen improvement as expected in his team and plans to change practice session. To help the players he changes the Frequency, Intensity, Time and Type of their exercise and uses the fitness principle of frequency
overload
progression
reversibility
Answer:
progession
Explanation:
Light waves are:
O Transverse waves
O Longitudinal Waves
Answer:
They are Transverse Waves.
Answer: Transverse waves
According to Newton's 3rd law: There is
always an ___ __ and _______ force
acting on any object that interacts with
another object
Equal and Opposite
Vertical and Horizontal
Faster and Slower
Greater and Lesser
in a well water is filled up to the height of 6 meters.calculate the pressure given by the water at the bottom of the well
Answer:
The pressure given by the water at the bottom is 58,800 Pa
Explanation:
Pressure Exerted by a Column of Liquid
The pressure P exerted by a column of liquid of height h and density ρ is given by the hydrostatic pressure equation:
P = ρgh
Where ρ is the density of the liquid, g is the acceleration of gravity g=9.8m/s^2, and h is the height of the column of liquid.
The height of water in a well is h=6 m. The density of water is a known quantity:
[tex]\rho = 1,000\ kg/m^3[/tex]
Calculating P:
P = 1,000*9.8*6
P = 58,800 Pa
The pressure given by the water at the bottom is 58,800 Pa
What would the products of a double-replacement reaction between Na2S
and MgF2 be?
A. NaF and MgS
B. MgF and Nas
C. F2S and MgNa2
D. MgF2 and Nas
Answer:
A. NaF and MgS
Explanation:
The reaction equation is given as:
Na₂S + MgF₂ → 2NaF + MgS
The product of this reaction is NaF and MgS.
In a double displacement reaction there is an actual exchange of partners to form new compounds. This reaction takes place between ionic compounds.
The driving force for the reaction is:
formation of an insoluble precipitateformation of water or any other non-ionizing compound liberation of a gaseous product.Identify two factors that increase the electric force between objects
Answer: The distance between particles, and the amount of electric charge they carry.
Explanation:
Charles Coulomb wanted to figure out the strength of the force between two objects and these were the two most independent factors.
why is it possible for iron ships to float o water,but needles sink when dropped in water
Explanation:
Needles sinks in water due to the more density of needles than the density of water. But ship is made hollow and contains air. So it's average density Is less than that of water. It displaces the liquid of it's own weight causing the ship to float on water.
So, it it possible for iron ships to float on water,but needles sink when dropped in water.
Hope it will help :)❤
High- and low-pressure areas leading to air movement happen when there are differences in which factor?
clouds
density
atmosphere
precipitation
whoever gets the answer will get brainliest!! :D
Answer:
The answer is density
Explanation:
They density of the air is what makes a difference.
A circuit contains two 1.5 volt battery and a bulb with a resistance of 3 ohms. Calculate the current
Answer:
The current is 1 A
Explanation:
Current in a Series Connection
When two or more elements are connected in series, all of them have the same current, and the sum of their individual voltages is the total voltage applied to the circuit.
According to Ohm's law:
V=R.I
Where V is the voltage, R is the resistance and I is the current of a circuit.
We have a voltage of V=1.5 V + 1.5 V = 3 V and a resistance of R=3 ohms.
We can calculate the current by solving for I:
[tex]\displaystyle I=\frac{V}{R}=\frac{3}{3}=1\ A[/tex]
The current is 1 A
What causes seasons to occur?
A) The revolution of the moon around the earth
B) The rotation of the moon around the Earth
C) The Earths tilt on its axis.
D) The moons tilt on its axis.
Answer:
C
Explanation:
I believe that it's C
9. A soft drink distibutor drove west 11 km from Minnehaha to Nut Plains. She then turned around and drove back east for 209 km to Dover
What distance did the soft drink dibutor travel
Distance
Answer:
220km
Explanation:
Given parameters:
Distance traveled from Minnehaha to Nut Plains = 11km
Distance traveled to Dover = 209km
Unknown:
The distance the soft drink distributor traveled = ?
Solution:
To solve this problem, we must understand that distance is the total length of path covered in a journey.
So;
Distance = 209km + 11km = 220km
The soft drink distributor covered 220km
The histogram shows final exam scores, and the table shows letter grades for each range of scores. A passing grade is 60% or higher.
A 90–100%
B 80–90%
C 70–80%
D 60–70%
Which statement is supported by the data in the histogram?
A. Twenty students received As and Bs.
B. Forty students received scores between 40% and 60%.
C. Most students received As and Bs.
D. Most students passed the final exam.
Answer:
D
Explanation:
Edg2020
Match the information below with the type of energy it can be used to calculate.
Words to fill the blanks:
1.
Potential Energy
2.
Kinetic Energy
3.
Both Potential and Kinetic Energy
Answer:
Explanation:
Mass - 3
Height - 1
Gravity - 1
Velocity - 2
Potential Energy: mgh
Kinetic Energy: 1/2mv^2
A cyclist travels 1850 m north and then 1200 m south. Find both the distance it has traveled and the magnitude of its displacement.
Answer:
The distance it has traveled is 3,050 m and the magnitude of its displacement is 650 m north.
Explanation:
Distance refers to the length between any two points in space, while displacement refers to the distance from a start position to an end position regardless of the path.
In other words, distance refers to how much space an object travels during its movement; is the quantity moved. It is also said to be the sum of the distances traveled. The distance traveled by a mobile is the length of its trajectory and it is a scalar quantity. In this case, the distance is calculated as:
1850 m + 1200 m= 3,050 m
Displacement refers to the distance and direction of the final position from the initial position of an object. The displacement effected is a vector quantity. The vector representing the displacement has its origin in the initial position, its end in the final position, and its module is the distance in a straight line between the initial and final positions. That is, when expressing the displacement it is done in terms of the magnitude with its respective unit of measurement and the direction because the displacement is a vector type quantity. Mathematically, the displacement (Δd) is calculated as:
Δd= df - di
where df is the final position and di is the initial position of the object.
In this case, the displacement is calculated as:
1850 m - 1200 m= 650 m
Since the distance to the north is greater, the direction of travel will be to the north.
The distance it has traveled is 3,050 m and the magnitude of its displacement is 650 m north.
Which two types of potential energies would be types of mechanical energies? electrical and kinetic nuclear and chemical radiant and thermal elastic and gravitational
The two types of potential energies that would be types of mechanical energies are:
thermal elastic energy and gravitational energy.What is potential energy?The term potential energy is the energy possessed by a body by virtue of its position. It is different from kinetic energy which is due to the state of motion of a body.
The two types of potential energies that would be types of mechanical energies are;
thermal elastic and gravitational energy.Learn more about mechanical energy: https://brainly.com/question/1932868
Answer: D - elastic and gravitational
Explanation: Edge 2023
it regulates the amount of light passing through the spicemen. A. arm B. base C. body tube D. diaphragm
Answer:
D. diaphragm
Explanation:
The question above is related to the different parts of the microscope. Among the choices above, it is the diaphragm that regulates the amount of light passing through the specimen. This is located below the stage (the platform where the slide of specimen is placed). With the help of the diaphragm, the intensity of light is controlled, which allows the observer to see the specimen in the best contrast.
Additional Information:
The arm links the base of the microscope to its head.
The base simply supports the microscope.
The body tube links the objective lenses to the eyepiece.
If you want to make a flashlight and have two batteries and a light bulb how would you hook them up to make it bright and why?
Answer:
The positive end of battery 1 touching the negative end of battery 2 and wires connecting the negative of battery 1 to the light light bulb and the positive of battery 2 to the light bulb.
Explanation:
A 55.0 kg person, having a density of
1010 kg/m3, is underwater. What is the
buoyant force acting on the person?
[?]N
Pwater = 1,000 kg/m3
Answer:
534.7
Explanation:
55/1010 = 0.0545m^3
1000(0.0545)(9.81) = 534.7 N (kept at 4 sig figs)
the height has a distance of 2.5 seconds to hit the ground what is gravity?
Answer:
11 times
Explanatiom:
756 fourty
HELP!!
8. The speed that the car is going at an instant of time is called the (5 points)
average speed
final speed
initial speed
instantaneous speed
Answer:
the speed that the car is going at an instant of time is called the instantaneous speed.
How can you tell is energy has been transferred or transformed
Answer:
In mY Knowledge
Energy transfer is the movement of energy from one location to another. Energy transformation is when energy changes from one type to another. While energy can be transferred or transformed, the total energy always remains the same.
Hope iT HeLps :D
Answer:
You can tell if energy has been transferred when something works when you put a body of energy in it. For example, you'll know when energy is transferred if you plug a lamp cord into an electric socket and the lamp turns on. Energy is being transferred from the socket to the lamp.
You can tell when energy is being transformed when it changes from one energy to another. You can know when energy is being transformed when you turn on a stove. Chemical energy transforms into electric energy.
I hope that helps!
If it is correct, may I be brainliest?
In which application is a magnet used to store information?
A. The needle on a compass
B. A recycling-center separator
C. The clasp on a necklace
D. The disk in a computer hard drive
Answer:
d the disk in a computer hard drive
Explanation:
because hard drive use magnetic memory tostore giga- and terabytes of data in computer.
The disk in a computer hard drive is an application that uses magnets to store information.
What are magnets?Magnets are materials which are produce magnetic properties and make use of magnetic fields.
Magnets are used on various appliances such as speakers, microphones, computer hard disks, electromagnets, etc.
Hard disks make use of the magnetic properties of magnets to store information.
Therefore, the disk in a computer hard drive is an application that uses magnets to store information.
Learn more about magnets at: https://brainly.com/question/16236550
#SPJ2
The temperature is directly proportional to the speed of sound. Why?
First, we need to understand what we mean by sound and temperature. Sound is the vibration of particles traveling as a wave. Temperature is a measure of energy in a system of particles. A higher temperature means the particles have a higher energy, higher energy means they're moving around faster, and that faster motion makes them more capable of carrying sound waves.
I NEED HELP ASAP IM ON TIMER !!!!!!!!
Average speed and average velocity are always the same.
Please select the best answer from the choices provided
T
F
Average speed and average velocity are always the same.
Please select the best answer from the choices provided
T
F
Answer:
F
Explanation:
The average velocity is the ratio of total displacement and time.The average speed is the ratio of total distance and time.Therefore the average speed and average velocity are equal if the total displacement is equal to the total distance that is if the body travels along a straight line without changing the direction.