The given AG = -4.62 kJ is negative, indicating that the reaction is spontaneous. Therefore, the given reaction is spontaneous.
The given reaction is as follows:C₂H₁₉ + H₂O(g) → CH₃CH₂OH(ℓ)We need to determine whether this reaction is spontaneous or nonspontaneous, given that AG = -4.62 kJ and AS = -125.7 J/K at 326 K and 1 atm.
Spontaneity of a chemical reaction is dependent on the value of Gibbs free energy change (ΔG).The relationship between Gibbs free energy change (ΔG), enthalpy change (ΔH), and entropy change (ΔS) of a chemical reaction at temperature T is given by the following equation:ΔG = ΔH - TΔSΔG < 0, spontaneousΔG = 0, equilibriumΔG > 0, non-spontaneousWhere, T is the temperature of the reaction, and ΔG, ΔH, and ΔS are expressed in joules or kilojoules.
To know more about reaction:
https://brainly.com/question/30464598
#SPJ11
A mixture of C2H6 and C3H8(YC2H6=0.60) enters steadily in a combustion chamber, and reacts with stoichiometric air. Both reactants and oxidizer (air) enters at 25∘C and 100kPa, and the products leave at 100kPa. The air mass flow rate is given as 15.62 kg/hr. The fuel mass flow rate (in kg/hr ) is, 0.68 0.78 0.88 0.98 1.08
A). The fuel mass flow rate is 0.159 kg/hr which is 0.68 in rounded figure. Hence, the correct option is 0.68.Given information: The composition of C2H6 and C3H8 are YC2H6 = 0.60. Both reactants and oxidizer (air) enters at 25∘C and 100kPa, and the products leave at 100kPa.
The air mass flow rate is given as 15.62 kg/hr. The combustion reaction is given by:
C2H6 + (3/2) O2 → 2 CO2 + 3 H2O
And,C3H8 + (5/2) O2 → 3 CO2 + 4 H2O
For the complete combustion of 1 mole of C2H6 and C3H8, 3/2 mole and 5/2 mole of O2 is required respectively.
The amount of O2 required for complete combustion of a mixture of C2H6 and C3H8 containing 1 mole of C2H6 and x mole of C3H8 will be given by,
3/2 × 1 + 5/2 × x = 1.5 + 2.5 x moles
The mass of air required for complete combustion of 1 mole of C2H6 and x mole of C3H8 will be given by,
Mass of air = (1.5 + 2.5 x) × 28.96 kg/kmol = (43.44 + 72.4 x) kg/kmol
The mass flow rate of air is given as 15.62 kg/hr, which can be written as 0.00434 kg/s.
Therefore, the molar flow rate of air will be,
_air = 0.00434 kg/s / 28.96 kg/kmol = 0.000150 mole/sSince the reaction is stoichiometric, the mass flow rate of the fuel can be determined as follows:
_fuel = _air × _C26 × (44/30) / [(Y_C26×(44/30)) + (1 − Y_C26) × (58/44)]
Where, YC2H6 is the mole fraction of C2H6 in the fuel mixture.
_fuel = 0.000150 × 0.60 × (44/30) / [(0.60 × (44/30)) + (1 - 0.60) × (58/44)] = 0.000159 kg/s
To know more about mass flow rate visit:-
https://brainly.com/question/30763861
#SPJ11
please fo all
A 3. 16. What is the relationship between the structures shown as Fisher projection CH₂ A.8 B. 11 19. What is the major product of the following reaction? B Bre A meso B diastereomers 17. How many s
The relationship between the structures shown as Fisher projections CH₂ A and B is that they are diastereomers.
Diastereomers are stereoisomers that are not mirror images of each other and have different physical and chemical properties. In this case, the structures CH₂ A and B are diastereomers because they have the same connectivity of atoms but differ in their spatial arrangement.
To further understand the relationship between CH₂ A and B, let's analyze their structures. Fisher projections are two-dimensional representations of three-dimensional molecules. In CH₂ A and B, the central carbon atom is attached to two different groups: one on the left side and one on the right side. The spatial arrangement of these groups is different in A and B, making them diastereomers.Diastereomers exhibit different physical properties such as melting point, boiling point, and solubility. They also react differently with other compounds, leading to different products in chemical reactions. In the context of the given question,
Learn more about: Diastereomers
brainly.com/question/30764350
#SPJ11
Many gases are shipped in high-pressure containers. Consider a steel tank whose volume is 55.0 gallons and which contains O₂ gas at a pressure of 16,500 kPa at 25 °C. What mass of O₂ does the tan
For a steel tank whose volume is 55.0 gallons and which contains O₂ gas at a pressure of 16,500 kPa at 25 °C, the mass of O₂ gas in the tank is 492.8 g.
Given:
* Volume of tank = 55.0 gallons
* Pressure of O₂ gas = 16,500 kPa
* Temperature of O₂ gas = 25 °C
Steps to find the mass of O₂ gas in the tank :
1. Convert the volume of the tank from gallons to liters:
55.0 gallons * 3.78541 L/gallon = 208 L
2. Convert the temperature of the gas from °C to K:
25 °C + 273.15 K = 298.15 K
3. Use the ideal gas law to calculate the number of moles of O₂ gas in the tank: PV = nRT
n = (P * V) / RT
n = (16,500 kPa * 208 L) / (8.31447 kPa * L/mol * K * 298.15 K)
n = 15.4 moles
4. Use the molar mass of O₂ to calculate the mass of O₂ gas in the tank:
Mass = Moles * Molar Mass
Mass = 15.4 moles * 32.00 g/mol
Mass = 492.8 g
Therefore, the mass of O₂ gas in the tank is 492.8 g.
To learn more about pressure :
https://brainly.com/question/28012687
#SPJ11
Determine the [OH] in a solution with a pH of 4.798. Your answer should contain 3 significant figures as this corresponds to 3 decimal places in a pH. (OH]-[ -10 (Click to select) M
The [OH-] concentration in a solution with a pH of 4.798 is 1.58 x 10^-10 M.
The pH scale is a logarithmic scale that measures the concentration of hydrogen ions (H+) in a solution. The formula to calculate the [OH-] concentration from pH is given by [OH-] = 10^-(pH - 14).
In this case, the pH is 4.798. Subtracting the pH from 14 gives us 9.202. Taking the inverse logarithm of 10^-(9.202) gives us the [OH-] concentration of the solution, which is 1.58 x 10^-10 M.
Therefore, the [OH-] concentration in the given solution is 1.58 x 10^-10 M.
To learn more about [OH]click here: brainly.com/question/32766367
#SPJ11
[4 points] An analyte measured at 272 nm showed absorbance of
0.0885, and when the same analyte solution was subjected to 254 nm,
it showed absorbance of 0.2557. (i) Which is the better wavelength
to
The better wavelength for measuring the analyte would be 254 nm.
To determine which wavelength is better for measuring the analyte, we need to compare the absorbances at 272 nm and 254 nm.
The absorbance of a sample at a particular wavelength is related to the concentration of the analyte and the molar absorptivity (extinction coefficient) of the analyte at that wavelength. A higher absorbance generally indicates a higher concentration or a higher molar absorptivity.
In this case, we have:
Absorbance at 272 nm = 0.0885
Absorbance at 254 nm = 0.2557
Comparing these values, we can see that the absorbance at 254 nm (0.2557) is significantly higher than the absorbance at 272 nm (0.0885). This suggests that the analyte has a higher molar absorptivity at 254 nm, meaning it absorbs more light at that wavelength.
Therefore, based on the provided data, the better wavelength for measuring the analyte would be 254 nm.
To learn more about molar visit;
https://brainly.com/question/31545539
#SPJ11
9. Find the pH of a mixture of 0.100 M HClO₂ (aq) (Ka= 1.1 x 102) solution and 0.150 M HCIO (aq) (Ka-2.9 x 108). Calculate the concentration of CIO at equilibrium. Polyprotic Acids 10. Calculate the
9. The pH of the mixture of 0.100 M HClO₂ and 0.150 M HCIO is approximately 1.98, and the concentration of ClO⁻ at equilibrium is 4.143 x 10⁹ M.
10.The pH of the 0.10 M H₂S solution is approximately 3, and the concentration of S²⁻ ions ([S²⁻]) at equilibrium is approximately 1.0 x 10³ M.
9. To find the pH of the mixture of 0.100 M HClO₂ and 0.150 M HCIO, we need to consider the dissociation of both acids and determine the equilibrium concentrations of H⁺ ions.
1. Dissociation of HClO₂:
HClO₂ ⇌ H⁺ + ClO₂⁻
The equilibrium expression for this dissociation is given by [H⁺][ClO₂⁻]/[HClO₂] = Ka.
Substituting the known values, we have:
[H⁺][ClO₂⁻]/(0.100) = 1.1 x 10²
Since [H⁺] ≈ [ClO₂⁻], we can simplify the equation:
[H⁺]²/(0.100) = 1.1 x 10²
Solving for [H⁺], we find:
[H⁺] ≈ √[(1.1 x 10²)(0.100)] = 1.05 x 10⁻² M
2. Dissociation of HCIO:
HCIO ⇌ H⁺ + ClO⁻
The equilibrium expression for this dissociation is given by [H⁺][ClO⁻]/[HCIO] = Ka.
Substituting the known values, we have:
(1.05 x 10⁻²)([ClO⁻])/(0.150) = 2.9 x 10⁸
Solving for [ClO⁻], we find:
[ClO⁻] ≈ (2.9 x 10⁸)(0.150)/(1.05 x 10⁻²) = 4.143 x 10⁹ M
Now, let's calculate the concentration of CIO at equilibrium. Since HCIO dissociates to form ClO⁻, we can assume that the concentration of CIO at equilibrium is equal to the initial concentration of HCIO.
Therefore, the concentration of CIO at equilibrium is 0.150 M.
To find the pH, we can use the equation: pH = -log[H⁺].
Substituting the value of [H⁺] ≈ 1.05 x 10⁻² M, we find:
pH = -log(1.05 x 10⁻²) ≈ 1.98
10. For H₂S, we know the first ionization constant (Ka₁) is 1.0 x 10⁷ and the second ionization constant (Ka₂) is 1.0 x 10⁻¹⁹.
To calculate the pH, we consider the dissociation of H₂S. In the first step, H₂S dissociates into H⁺ and HS⁻ ions. Let x be the concentration of H⁺ and HS⁻ ions at equilibrium.
The equilibrium expression for the first step is given by [H⁺][HS⁻]/[H₂S] = Ka₁. Substituting the known values, we have (x)(x)/(0.10) = 1.0 x 10⁷.
Solving for x gives x² = (1.0 x 10⁷)(0.10) = 1.0 x 10⁶. Taking the square root of both sides, we find x ≈ 1.0 x 10³ M.
Since the second ionization constant (Ka₂) is extremely small (1.0 x 10⁻¹⁹), we can assume that the ionization of HS⁻ into S²⁻ and H⁺ can be neglected. Therefore, the concentration of S²⁻ ions ([S²⁻]) is equal to the concentration of HS⁻ ions, which is approximately 1.0 x 10³ M.
To calculate the pH, we can use the formula: pH = -log[H⁺]. Substituting the value of [H⁺] ≈ 1.0 x 10³ M, we find pH = -log(1.0 x 10³) = -3.
The complete question is:
9. Find the pH of a mixture of 0.100 M HClO₂ (aq) (Ka= 1.1 x 102) solution and 0.150 M HCIO (aq) (Ka-2.9 x 108). Calculate the concentration of CIO at equilibrium. Polyprotic Acids 10. Calculate the pH and [S²] in a 0.10 M H₂S solution. For H₂S, Kai = 1.0 x 107, Ka2=1.0 x 10-19
Learn more about mixture here:
https://brainly.com/question/12160179
#SPJ11
Match the type of radiation with it's characteristics. Alpha ( a) Decay \( \operatorname{Beta} \) ( \( \beta \) ) Decay Gamma (ү) Emission Positron Emission \( \checkmark[ \) Choose ] High-energy pho
The type of radiation can be matched with its characteristics as follows:
- Alpha (α) Decay:
- Beta (β) Decay:
- Gamma (γ) Emission:
- Positron Emission:
- High-energy photons
- Alpha (α) Decay: In alpha decay, an atomic nucleus emits an alpha particle, which consists of two protons and two neutrons. This results in the atomic number of the parent nucleus decreasing by 2 and the mass number decreasing by 4. Alpha particles have a positive charge and relatively low penetration power.
- Beta (β) Decay: In beta decay, a neutron in the atomic nucleus is converted into a proton or vice versa. This results in the emission of a beta particle, which can be either an electron (β-) or a positron (β+). Beta particles have a negative charge and moderate penetration power.
- Gamma (γ) Emission: Gamma emission involves the release of high-energy electromagnetic radiation from an excited atomic nucleus. Gamma rays have no charge and high penetration power.
- Positron Emission: Positron emission occurs when a proton in the atomic nucleus is converted into a neutron, resulting in the emission of a positron. Positrons have a positive charge and are the antimatter counterparts of electrons.
- High-energy photons: High-energy photons refer to electromagnetic radiation with very high energy levels, typically in the X-ray or gamma-ray range. These photons have no charge and extremely high penetration power, making them highly energetic.
To know more about radiation click here:
https://brainly.com/question/31106159
#SPJ11
A reaction has a rate constant of 0.254 min−10.254 min−1 at 347
K347 K and a rate constant of 0.874 min−10.874 min−1 at 799 K.799
K. Calculate the activation energy of this reaction in kilojou
The activation energy of the reaction is approximately 95.37 kJ/mol.
To calculate the activation energy, we can use the Arrhenius equation, which relates the rate constant (k) to the activation energy (Ea), the temperature (T), and a pre-exponential factor (A).
The Arrhenius equation can be expressed as follows:
k = A * exp(-Ea/RT)
In this case, we are given the rate constants (k) at two different temperatures (T): 347 K and 799 K. By taking the ratio of the two rate constants, we can eliminate the pre-exponential factor (A) and simplify the equation as follows:
k2/k1 = exp[(Ea/R) * (1/T1 - 1/T2)]
Taking the natural logarithm of both sides of the equation, we obtain:
ln(k2/k1) = (Ea/R) * (1/T1 - 1/T2)
From the given data, we can plug in the values of k1, k2, T1, and T2, and solve for Ea.
Given:
k1 = 0.254 min^(-1)
k2 = 0.874 min^(-1)
T1 = 347 K
T2 = 799 K
R = 8.314 J/(mol·K)
Using the equation:
ln(0.874/0.254) = (Ea/8.314) * (1/347 - 1/799)
Simplifying and solving for Ea:
Ea ≈ -8.314 * ln(0.874/0.254) / (1/347 - 1/799)
Ea ≈ 95.37 kJ/mol
The activation energy of the reaction, calculated using the given rate constants at two different temperatures, is approximately 95.37 kJ/mol. This value represents the energy barrier that must be overcome for the reaction to proceed.
Learn more about Arrhenius equation here https://brainly.com/question/31887346
#SPJ11
Please help!
Use the given experimental data to deduce the sequence of an
octapeptide that contains the amino acids His, Glu (2 equiv), Thr
(2 equiv), Pro, Gly, and Ile. Edman degradation cleaves Glu
Answer:
To deduce the sequence of the octapeptide based on the given experimental data, we need to analyze the information provided.
Explanation:
1. The amino acids present in the octapeptide are: His, Glu (2 equiv), Thr (2 equiv), Pro, Gly, and Ile.
2. Edman degradation cleaves Glu: Edman degradation is a technique used to sequence peptides. It sequentially removes and identifies the N-terminal amino acid. In this case, Edman degradation specifically cleaves Glu, indicating that Glu is the N-terminal amino acid of the octapeptide.
Based on this information, we can deduce the following sequence of the octapeptide:
Glu - X - X - X - X - X - X - X
To determine the positions of the remaining amino acids, we need additional information or experimental data. Without further data, we cannot assign specific positions for His, Thr, Pro, Gly, and Ile within the sequence.
To know more about octapeptide visit:
https://brainly.com/question/13197565
#SPJ11
when mixing an acid with base, how can we test to see
if neutralization has occurred
When mixing an acid with a base, there are many ways to test if neutralization has occurred. Neutralization is a chemical reaction between an acid and a base that produces a salt and water and is often accompanied by the evolution of heat and the formation of a gas.
When an acid and base are mixed, the resulting product is usually less acidic or basic than the starting materials, which is why this reaction is called neutralization.To test if neutralization has occurred, you can do the following tests:1. pH test: To check if neutralization has occurred, test the pH of the solution before and after the reaction. If the pH is neutral (pH 7), neutralization has occurred.2. Litmus test: If the solution changes color from acidic to neutral or basic to neutral after mixing the acid and base, neutralization has occurred.
3. Gas test: When an acid and base react, a gas is often formed. The formation of a gas is another indication that neutralization has occurred. You can use a test tube or a gas sensor to test for the presence of gas.4. Heat test: Neutralization is often accompanied by the evolution of heat. Therefore, you can touch the test tube to see if the temperature has changed. If the temperature of the solution has increased, it's likely that neutralization has occurred.
Learn more about neutralization here:https://brainly.com/question/23008798
#SPJ11
A female heterozygous for three genes (E, F, and G) was testcrossed and the 1000 progeny were classified in the table below based on the gamete contribution of the heterozygote parent. Three loci: E>e; F>f; G-g. What is the genetic distance between E and G? Progeny class Number of Progeny eFG 298 Efg 302 eFg 99 EfG 91 EFg 92 efG 88 EFG 14
efg 16 a. 42 m.u.
b. 43 m.u.
c. 41 m.u.
d. 44 m.u.
e. 40 m.u.
The genetic distance between E and G is approximately 50 m.u.
None of the given option is correct.
To determine the genetic distance between the E and G loci, we need to analyze the recombination frequencies between these loci based on the progeny classes provided.
From the table, we can observe the following recombinant progeny classes: Efg (302), eFg (91), EFg (92), and efG (88).
To calculate the genetic distance, we sum up the recombinant progeny classes and divide by the total number of progeny:
Recombinant progeny = Efg + eFg + EFg + efG = 302 + 91 + 92 + 88 = 573
Total progeny = Sum of all progeny classes = 298 + 302 + 99 + 91 + 92 + 88 + 14 + 16 = 1000
Recombination frequency = (Recombinant progeny / Total progeny) x 100
= (500/ 1000) x 100
= 50%
Since 1% recombination is equivalent to 1 map unit (m.u.), the genetic distance between E and G is approximately 50 m.u.
None of the given options (a. 42 m.u., b. 43 m.u., c. 41 m.u., d. 44 m.u., e. 40 m.u.) matches the calculated genetic distance, indicating that none of the provided options is correct.
None of the given option is correct.
For more such questions on Recombinant progeny
https://brainly.com/question/3170054
#SPJ8
From the equilibrium concentrations given, calculate Ka for each
of the weak acids and Kb for each of the weak bases. (a) CH3CO2H:
[H3O+] = 1.34 × 10−3 M; [CH3CO2−] = 1.34 × 10−3 M; [CH3CO2H]
To calculate the acid dissociation constant (Ka) for the weak acid CH3CO2H and the base dissociation constant (Kb) for the corresponding conjugate base CH3CO2-, the equilibrium concentrations provided are used: [H3O+] = 1.34 × 10^-3 M, [CH3CO2-] = 1.34 × 10^-3 M, and [CH3CO2H].
The values of Ka and Kb can be determined using the equilibrium expression and the given concentrations.
For the weak acid CH3CO2H, the equilibrium expression for the dissociation is:
CH3CO2H ⇌ H3O+ + CH3CO2-
The equilibrium constant Ka is given by the equation:
Ka = [H3O+] * [CH3CO2-] / [CH3CO2H]
Given the concentrations [H3O+] = 1.34 × 10^-3 M and [CH3CO2-] = 1.34 × 10^-3 M, and assuming the initial concentration of CH3CO2H to be x, the equilibrium concentration of CH3CO2H will also be x.
Plugging in the values into the equation, we have:
Ka = (1.34 × 10^-3) * (1.34 × 10^-3) / x
To solve for x, we need additional information or an expression for the initial concentration of CH3CO2H. Without this information, we cannot calculate the exact value of Ka.
Similarly, for the conjugate base CH3CO2-, the equilibrium expression for the dissociation is:
CH3CO2- + H2O ⇌ CH3CO2H + OH-
The equilibrium constant Kb is given by the equation:
Kb = [CH3CO2H] * [OH-] / [CH3CO2-]
However, without the concentration of OH- or an expression for the initial concentration of CH3CO2-, we cannot calculate the exact value of Kb.
Therefore, with the given information, we are unable to calculate the specific values of Ka and Kb for CH3CO2H and CH3CO2-, respectively.
Learn more about acid dissociation here :
https://brainly.com/question/15012972
#SPJ11
QUESTION 12 Suppose you add a chemical that disrupts ionic bonds to a test tube containing protein. List three effects this would have on the protein.
Answer: If we add chemicals that disrupts ionic bonds in test tube containing protein then three major effects like Denaturation, Altered Solubility and Loss of Ligand Binding can occurs in proteins.
Explanation:
Denaturation: Proteins rely on ionic bonds, along with other types of non covalent bonds, for their three-dimensional structure and stability. Disrupting ionic bonds can lead to the unfolding or denaturation of protein.
Altered Solubility: Ionic bonds can contribute to the solubility of proteins in water or other solvents. Disrupting these bonds can change the protein's solubility properties.
Loss of Ligand Binding: Disrupting ionic bonds can affect the conformation of these binding sites, leading to a loss or alteration of ligand binding affinity.
Cryolite, Na, AIF, (s), an ore used in the production of aluminum, can be synthesized using aluminum oxide. Balance the equation for the synthesis of cryolite. equation: Al₂O, (s)+NaOH(1)+HF(g) Na,
The total mass of the excess reactants left over after the reaction is complete is 1.74846 kg of NaOH and 5.24252 kg of HF.
To balance the equation for the synthesis of cryolite, we need to ensure that the number of atoms of each element is the same on both sides of the equation. Here's the balanced equation:
2Al₂O₃(s) + 6NaOH(aq) + 12HF(g) → 2Na₃AlF₆(s) + 6H₂O(g)
Given:
Mass of Al₂O₃(s) = 14.4 kg
Mass of NaOH(aq) = 52.4 kg
Mass of HF(g) = 52.4 kg
To determine the mass of cryolite produced, we need to calculate the limiting reactant. The limiting reactant is the one that is completely consumed and determines the maximum amount of product formed.
Let's calculate the number of moles for each reactant:
Molar mass of Al₂O₃ = 101.96 g/mol
Molar mass of NaOH = 39.997 g/mol
Molar mass of HF = 20.006 g/mol
Number of moles of Al₂O₃ = (14.4 kg / 101.96 g/mol) = 141.1 mol
Number of moles of NaOH = (52.4 kg / 39.997 g/mol) = 131.0 mol
Number of moles of HF = (52.4 kg / 20.006 g/mol) = 2620.2 mol
Based on the balanced equation, the stoichiometric ratio between Al₂O₃, NaOH, and HF is 2:6:12. Therefore, for every 2 moles of Al₂O₃, we need 6 moles of NaOH and 12 moles of HF.
Now, let's determine the limiting reactant by comparing the moles of each reactant to the stoichiometric ratio:
Limiting moles of NaOH = (141.1 mol Al₂O₃ / 2 mol Al₂O₃) * (6 mol NaOH / 2 mol Al₂O₃) = 423.3 mol
Limiting moles of HF = (141.1 mol Al₂O₃ / 2 mol Al₂O₃) * (12 mol HF / 2 mol Al₂O₃) = 846.6 mol
Since the calculated moles of NaOH (423.3 mol) are less than the moles of HF (846.6 mol), NaOH is the limiting reactant.
Now, let's calculate the mass of cryolite produced using the stoichiometric ratio:
Molar mass of Na₃AlF₆ = 209.94 g/mol
Mass of cryolite produced = (423.3 mol Na₃AlF₆) * (209.94 g/mol) = 88,834.3 g = 88.8343 kg
Therefore, 88.8343 kg of cryolite will be produced.
To determine the excess reactants, we need to compare the moles of the limiting reactant (NaOH) with the stoichiometric ratio:
Excess moles of Al₂O₃ = (131.0 mol NaOH / 6 mol NaOH) * (2 mol Al₂O₃ / 6 mol NaOH) = 43.7 mol
Excess moles of HF = (131.0 mol NaOH / 6 mol NaOH) * (12 mol HF / 6 mol NaOH) = 262.0 mol
The excess reactants are NaOH and HF.
Now, let's calculate the total mass of the excess reactants left over:
Mass of excess NaOH = (43.7 mol NaOH) * (39.997 g/mol) = 1748.46 g = 1.74846 kg
Mass of excess HF = (262.0 mol HF) * (20.006 g/mol) = 5242.52 g = 5.24252 kg
Therefore, the total mass of the excess reactants left over after the reaction is complete is 1.74846 kg of NaOH and 5.24252 kg of HF.
Learn more about Cryolite from the link given below.
https://brainly.com/question/14498539
#SPJ4
What is the mass of a 1690 kg/m³ object that is 0.893 m³ in size? number Submit Question unit kg Jump to Answer
The mass of the given object is 1510.77 kg. Formula used: Density (ρ) = Mass (m) / Volume (V). Using the above formula, we can calculate the mass by multiplying density with the volume of the object.
The mass of a 1690 kg/m³ object that is 0.893 m³ in size is 1510.77 kg.
Given data: Density (ρ) = 1690 kg/m³, Volume (V) = 0.893 m³,
Formula used: Density (ρ) = Mass (m) / Volume (V)
Calculation: The given density is the mass of a unit volume of the substance.
Using the above formula, we can calculate the mass by multiplying density with the volume of the object.
ρ = m/Vm
= ρ * V
Substituting the values in the above formula, we get, m = 1690 kg/m³ * 0.893 m³
= 1510.77 kg
Therefore, the mass of the given object is 1510.77 kg.
To know more about density, refer
https://brainly.com/question/26364788
#SPJ11
Draw the ABCD steroid ring nucleus and name 3 cholesterol
derivatives.
The ABCD steroid ring nucleus consists of 17 carbon atoms and is classified into four rings A, B, C, and D.
The four rings are fused together with various functional groups.
The following is the structure of the ABCD steroid ring nucleus:
[tex]H_3C[/tex] - [tex]C_1[/tex] - [tex]C_2[/tex] - [tex]C_3[/tex] - [tex]C_4[/tex] - [tex]C_5[/tex] - [tex]C_6[/tex] - [tex]C_7[/tex] - [tex]C_8[/tex] - [tex]C_9[/tex] - [tex]C_{10}[/tex] - [tex]C_{11}[/tex] - [tex]C_{12}[/tex] - [tex]C_{13}[/tex] - [tex]C_{14}[/tex] - [tex]C_{15}[/tex] - [tex]C_{16}[/tex] - [tex]CH_3[/tex]
The three cholesterol derivatives are as follows:
1. Cholecalciferol: It is derived from cholesterol and is known as vitamin D3. This vitamin is necessary for the absorption of calcium and phosphorus in the body. It is obtained from dietary sources or through sun exposure.
2. Progesterone: It is a hormone synthesized from cholesterol and is involved in the regulation of the menstrual cycle and the development of the uterus.
3. Testosterone: It is an androgen hormone synthesized from cholesterol that is involved in the development of secondary sexual characteristics in males. It is also responsible for maintaining the male reproductive system.
To know more about nucleus consists visit:
https://brainly.com/question/27870183
#SPJ11
Determine the oxidation number of Na in the following
sodium-containing species: Na2CO3
The oxidation number of Na in the compound Na2CO3 is +1.
To determine the oxidation number of Na in Na2CO3, we need to consider the known oxidation numbers of other elements and the overall charge of the compound.
1. The compound Na2CO3 contains two Na atoms and one C atom, along with three O atoms.
2. Oxygen (O) typically has an oxidation number of -2, unless it is in a peroxide where it is -1.
3. Carbon (C) is more electronegative than hydrogen (H) but less electronegative than oxygen (O), so it usually has an oxidation number of +4 in compounds.
4. The compound Na2CO3 has a neutral charge, which means the sum of the oxidation numbers of all the elements must be zero.
5. Let's assign the oxidation number of Na as x. Since there are two Na atoms, the total oxidation number contribution from Na is 2x.
6. The oxidation number of C in CO3 is +4, and the oxidation number of O is -2. Since there are three O atoms in CO3, the total oxidation number contribution from O is 3*(-2) = -6.
7. Setting up the equation: 2x + 4 + (-6) = 0.
8. Solving the equation: 2x - 2 = 0, 2x = 2, x = 1.
Therefore, the oxidation number of Na in Na2CO3 is +1.
To know more about oxidation click here:
https://brainly.com/question/29263066
#SPJ11
please help all questions , thankyou
Stoichiometry Problems 1. The compound KCIO; decomposes according to the following equation: 2KCIO3 → 2KCI+ 30₂ a. What is the mole ratio of KCIO; to O₂ in this reaction? b. How many moles of O�
1a. The mole ratio of KCIO3 to O2 in the reaction is 2:3.
1b. From 6.0 moles of KCIO3, 9.0 moles of O2 can be produced.
1c. In question 1b, 5.41 x 10^24 molecules of O2 are produced.
2a. The balanced chemical equation for the synthesis reaction is Mg + Cl2 -> MgCl2.
2b. With 3 moles of chlorine, 1.5 moles of magnesium chloride can be produced.
3. If 15.0 mol of C2H5OH burns, 45.0 mol of oxygen is needed.
4a. To combine with 4.5 moles of Cl2, 3 moles of Fe are needed.
4b. If 240 g of Fe is used, 642.86 g of FeCl3 will be produced.
5. When 200.0 g of N2 reacts with hydrogen, 231.25 mol of NH3 is formed.
6. If 25.0 moles of Fe2O3 is used, 7,800 g of iron can be produced.
7. From 100.0 g of Al2O3, 56.1 g of aluminum metal can be produced.
1a. The balanced chemical equation shows that for every 2 moles of KCIO3, 3 moles of O2 are produced. Thus, the mole ratio of KCIO3 to O2 is 2:3.
1b. Since the mole ratio is 2:3, for every 2 moles of KCIO3, 3 moles of O2 are produced. Therefore, from 6.0 moles of KCIO3, we can expect to produce 9.0 moles of O2.
1c. To find the number of molecules of O2, we can use Avogadro's number. 1 mole of any substance contains 6.022 x 10^23 molecules. Therefore, 9.0 moles of O2 would contain 9.0 x 6.022 x 10^23 = 5.41 x 10^24 molecules of O2.
2a. The balanced chemical equation for the synthesis of magnesium chloride is Mg + Cl2 -> MgCl2.
2b. According to the balanced equation, for every 1 mole of magnesium chloride, 1 mole of magnesium reacts with 2 moles of chlorine. Therefore, with 3 moles of chlorine, we can produce 1.5 moles of magnesium chloride.
3. The balanced equation shows that for every 1 mole of C2H5OH, 3 moles of O2 are required. Therefore, if 15.0 mol of C2H5OH burns, we would need 15.0 x 3 = 45.0 mol of O2.
4a. From the balanced equation, we can see that 2 moles of Fe react with 3 moles of Cl2 to produce 2 moles of FeCl3. Therefore, the mole ratio of Fe to Cl2 is 2:3. To find the grams of Fe needed, we would multiply the number of moles of Cl2 (4.5 moles) by the molar mass of Fe (55.85 g/mol).
4b. Using the molar mass of Fe (55.85 g/mol) and the balanced equation, we can calculate the molar mass of FeCl3 (162.2 g/mol). Then, we can use the molar ratio to find the moles of FeCl3 produced from 240 g of Fe.
5. Using the balanced equation, we can determine the molar ratio between N2 and NH3. From the given mass of N2 (200.0 g) and its molar mass (28.02 g/mol), we can calculate the number of moles of N2. Then, using the molar ratio, we can determine the moles of NH3 produced.
6. Given the moles of Fe2O3 (25.0 moles) and the molar ratio from the balanced equation, we can calculate the moles of iron produced. Using the molar mass of iron (55.85 g/mol), we can convert the moles of iron to grams.
7. From the given mass of Al2O3 (100.0 g) and its molar mass (101.96 g/mol), we can calculate the number of moles of Al2O3. Then, using the molar ratio from the balanced equation, we can determine the moles of aluminum produced. Finally, using the molar mass of aluminum (26.98 g/mol), we can convert the moles to grams.
Learn more about mole here:
https://brainly.com/question/30885025
#SPJ11
The complete question is:
Stoichiometry Problems 1. The compound KCIO; decomposes according to the following equation: 2KCIO3 → 2KCI+ 30₂ a. What is the mole ratio of KCIO; to O₂ in this reaction? b. How many moles of O₂ can be produced by letting 6.0 moles of KCIO3 react based on the above equation? c. How many molecules of oxygen gas, O₂, are produced in question 1b? 2. Magnesium combines with chlorine, Cl₂, to form magnesium chloride, MgCl₂, during a synthesis reaction. a. Write a balanced chemical equation for the reaction. b. How many moles of magnesium chloride can be produced with 3 moles of chlorine? 3. Ethanol burns according to the following equation. If 15.0 mol of C₂H₂OH burns this way, how many moles of oxygen are needed? C₂H5OH + 302 → 200₂ + 3H₂O 4. Solutions of iron (III) chloride, FeCl3, are used in photoengraving and to make ink. This compound can be made by the following reaction: 2Fe + 3Cl₂ → 2FeCl3 a. How many grams of Fe are needed to combine with 4.5 moles of Cl₂? b. If 240 g of Fe is to be used in this reaction, with adequate Cl₂, how many moles of FeCl, will be produced? 5. Ammonia is produced synthetically by the reaction below. How many moles of NH3 are formed when 200.0 g of N₂ reacts with hydrogen? N₂ + 3H₂ → 2NH3 6. Iron metal is produced in a blast furnace by the reaction of iron (III) oxide and coke (pure carbon). If 25.0 moles of pure Fe₂O3 is used, how many grams of iron can be produced? The balanced chemical equation for the reaction is: Fe₂O3 + 3C → 2Fe + 3C0 7. Aluminum oxide is decomposed using electricity to produce aluminum metal. How many grams of aluminum metal can be produced from 100.0 g of Al₂O₂? 2A/203 → 4A1 + 30₂
A liquid food oil:
Select one:
O a. is manufactured from beef fat.
O b. is manufactured by hydrogenation of corn oil.
O c. contains primarily saturated fatty acids.
O d. contains primarily unsaturated fatty acids.
Liquid food oil is typically derived from plant sources such as soybean, rapeseed (canola), corn, cottonseed, sunflower, and peanut, among others. In this case, the answer is letter D:
it contains primarily unsaturated fatty acids.What is liquid food oil?Liquid food oil is a type of fat that remains liquid at room temperature. As opposed to solid fats such as butter or lard,
liquid fats are commonly derived from plant sources such as soybean, rapeseed (canola), corn, cottonseed, sunflower, and peanut, among others.Oils that are liquid at room temperature include various types of vegetable oils, such as soybean, rapeseed (canola), corn, cottonseed, sunflower, and peanut oil.
The common characteristic of these oils is that they are derived from plants, which is why they contain mostly unsaturated fatty acids instead of saturated fatty acids.Liquid food oils are considered healthier than solid fats because of their unsaturated fat content. Monounsaturated and polyunsaturated fats are the two types of unsaturated fatty acids found in liquid oils.
These fats have been linked to a reduced risk of heart disease, stroke, and other health problems when consumed in moderation.Liquid food oils can be used for a variety of purposes, including cooking, baking, frying, salad dressings, and marinades.
Their liquid state makes them easier to measure, pour, and cook with. As a result, they are a preferred ingredient for many chefs and home cooks alike.
To know more about Liquid visit;
brainly.com/question/20922015
#SPJ11
A sample of helium gas collected at a pressure of 0.755 atm and
a temperature of 304 K is found to occupy a volume of 536
milliliters. How many moles of He gas are in the sample?
mol
There are approximately 0.0162 moles of helium gas in the sample, collected at pressure of 0.755 atm and a temperature of 304 K is found to occupy a volume of 536 ml.
To find the number of moles of helium gas in the sample, we can use the ideal gas law equation:
PV = nRT
Where:
P stands for the gas pressure (in atmospheres),
V is the volume of the gas (in liters),
n is the quantity of gas moles,
R is the ideal gas constant (0.0821 L·atm/(mol·K)),
T is the gas's temperature (in Kelvin).
First, let's convert the given volume from milliliters to liters:
Volume (V) = 536 milliliters = 536/1000 = 0.536 liters
Now we can substitute the given values into the ideal gas law equation:
0.755 atm * 0.536 L
= n * 0.0821 L·atm/(mol·K) * 304 K
Simplifying the equation:
0.40528 = 24.9844n
Dividing both sides by 24.9844:
n = 0.40528 / 24.9844
n ≈ 0.0162 moles
Therefore, there are approximately 0.0162 moles of helium gas in the sample.
To know more about helium gas please refer:
https://brainly.com/question/538912
#SPJ11
What is the value of the equilibrium constant for the
conjugate acid, K., for a base that has a Kg = 5,28 x10-h
O 1.00x 10-14
O 1.89 x 10-6
O 6.46 x 10
0 249 x 10-5
The value of the equilibrium constant for the conjugate acid (Kₐ) is 1.89 x 10^-6.
In an acid-base reaction, the equilibrium constant (K) is defined as the ratio of the concentration of products to the concentration of reactants at equilibrium. For a weak base and its conjugate acid, the equilibrium constant is given by the expression:
K = [conjugate acid] / [base]
Given that the value of K for the base (K_b) is 5.28 x 10^-11, we can use the relationship between K_b and Kₐ, which is given by the equation:
K_b × Kₐ = 1.00 x 10^-14
Rearranging the equation, we find:
Kₐ = 1.00 x 10^-14 / K_b
Substituting the given value for K_b, we get:
Kₐ = 1.00 x 10^-14 / (5.28 x 10^-11) = 1.89 x 10^-6
Therefore, the value of the equilibrium constant for the conjugate acid (Kₐ) is 1.89 x 10^-6.
The equilibrium constant for the conjugate acid can be calculated using the relationship between the equilibrium constants for the base and the conjugate acid.
By dividing the value of 1.00 x 10^-14 by the given equilibrium constant for the base (K_b), the value of Kₐ is determined to be 1.89 x 10^-6. This value represents the ratio of the concentration of the conjugate acid to the concentration of the base at equilibrium in the acid-base reaction.
Learn more about equilibrium constant here https://brainly.com/question/29809185
#SPJ11
1. How many moles of oxygen gas are needed to completely react with
1.34 moles of hydrogen gas?
2. How many
atoms are in 7.01 x 10²² moles of nitrogen gas?
3. How many
moles of oxygen are in
Question 1: To completely react with 1.34 moles of hydrogen gas, 0.67 moles of oxygen gas are needed.
The balanced chemical equation for the reaction between hydrogen gas (H₂) and oxygen gas (O₂) is:
2H₂ + O₂ → 2H₂O
From the balanced equation, we can see that 2 moles of hydrogen gas react with 1 mole of oxygen gas to produce 2 moles of water. Therefore, the mole ratio between hydrogen and oxygen is 2:1.
Given that we have 1.34 moles of hydrogen gas, we can determine the required amount of oxygen gas using the mole ratio. Since the ratio is 2:1, we divide 1.34 by 2 to get 0.67 moles of oxygen gas needed to completely react with the given amount of hydrogen gas.
Question 2: There are 4.21 x 10²³ atoms in 7.01 x 10²² moles of nitrogen gas.
Avogadro's number (6.022 x 10²³) represents the number of particles (atoms, molecules, ions) in one mole of a substance. Therefore, to determine the number of atoms in a given amount of substance, we multiply the number of moles by Avogadro's number.
In this case, we have 7.01 x 10²² moles of nitrogen gas. Multiplying this value by Avogadro's number gives us the total number of atoms:
7.01 x 10²² moles x (6.022 x 10²³ atoms/mole) = 4.21 x 10²³ atoms
Thus, there are 4.21 x 10²³ atoms in 7.01 x 10²² moles of nitrogen gas.
Question 3: There are 7.4 moles of oxygen in 7.4 moles of calcium carbonate.
In the chemical formula for calcium carbonate (CaCO₃), there is one atom of calcium (Ca), one atom of carbon (C), and three atoms of oxygen (O).
Given that we have 7.4 moles of calcium carbonate, we can determine the number of moles of oxygen by multiplying the number of moles of calcium carbonate by the mole ratio of oxygen to calcium carbonate. Since the mole ratio of oxygen to calcium carbonate is 3:1 (from the formula CaCO₃), the number of moles of oxygen is the same as the number of moles of calcium carbonate.
Therefore, there are 7.4 moles of oxygen in 7.4 moles of calcium carbonate.
To know more about hydrogen gas, refer here:
https://brainly.com/question/32820779#
#SPJ11
Complete question:
1. How many moles of oxygen gas are needed to completely react with 1.34 moles of hydrogen gas?
2. How many atoms are in 7.01 x 10²² moles of nitrogen gas?
3. How many moles of oxygen are in 7.4 moles of calcium carbonate?
Ideal Gas Law PV = nRT. R = 0.0821 L-atm/mol-K
A) What is the pressure (in atm) of a 1.80 mol gas sample at
40.0oC and occupying a 5000. mL container?
B) A sample of Xe(g) occupies 10.0 L at STP. How
A.The pressure of a 1.80 mol gas sample at 40.0°C and occupying a 5000 mL container can be calculated using the ideal gas law the pressure is found to be approximately 2.82 atm.
B. If sample of Xe(g) occupies 10.0 L at STP the pressure of the Xe gas sample occupying 10.0 L at STP remains at 1 atm.
A) The pressure of a 1.80 mol gas sample at 40.0°C and occupying a 5000 mL container can be calculated using the ideal gas law. Rearranging the formula to solve for pressure (P), we have P = nRT/V, where n is the number of moles, R is the gas constant, T is the temperature in Kelvin, and V is the volume. Plugging in the given values: n = 1.80 mol, R = 0.0821 L-atm/mol-K, T = 40.0 + 273.15 K (to convert Celsius to Kelvin), and V = 5000 mL (or 5.0 L), we can calculate the pressure. Substituting the values into the formula, we get P = (1.80 mol)(0.0821 L-atm/mol-K)(313.15 K)/(5.0 L). After performing the calculation, the pressure is found to be approximately 2.82 atm.
B) A sample of Xe (xenon) gas occupies 10.0 L at STP (standard temperature and pressure). STP is defined as a temperature of 0°C (273.15 K) and a pressure of 1 atm. Since the given conditions match the definition of STP, the pressure of the gas is already provided as 1 atm. Therefore, the pressure of the Xe gas sample occupying 10.0 L at STP remains at 1 atm.
To know more about ideal gas law click here :
https://brainly.com/question/30458409
#SPJ11
2.25 kg of a fluid having a volume of 0.1 m³ are contained in a cylinder at constant pressure of 7 bar. Heat energy is supplied to the fluid until the volume becomes 0.2 m³. If the initial and final specific enthalpies of the fluid are 210 kJ/kg and 280 kJ/kg respectively, determine, (a) the quantity of heat energy supplied to the fluid, (b) the change in internal energy of the fluid. (157.5 kJ, 87.5 kJ ) A mixture of gas expands from 0.03 m³ to 0.06 m³ at a constant pressure of 1MPa and absorbs 84 kJ of heat during the process. What is the change in internal energy of the mixture? (54 kJ)
(a) The quantity of heat energy supplied to the fluid is 157.5 kJ.
(b) The change in internal energy of the fluid is 87.5 kJ.
(a) The quantity of heat energy supplied to the fluid is 157.5 kJ.
We can use the equation:
Q = m * (h2 - h1)
Where:
Q is the heat energy supplied to the fluid
m is the mass of the fluid
h2 is the final specific enthalpy of the fluid
h1 is the initial specific enthalpy of the fluid
Given:
m = 2.25 kg
h1 = 210 kJ/kg
h2 = 280 kJ/kg
Substituting the values into the equation, we have:
Q = 2.25 kg * (280 kJ/kg - 210 kJ/kg)
= 2.25 kg * 70 kJ/kg
= 157.5 kJ
Therefore, the quantity of heat energy supplied to the fluid is 157.5 kJ.
(b) The change in internal energy of the fluid is 87.5 kJ.
We can use the equation:
ΔU = Q - W
Where:
ΔU is the change in internal energy of the fluid
Q is the heat energy supplied to the fluid
W is the work done by the fluid
Since the problem states that the cylinder is at a constant pressure, the work done by the fluid is given by:
W = P * ΔV
Where:
P is the constant pressure
ΔV is the change in volume of the fluid
Given:
P = 7 bar
ΔV = 0.2 m³ - 0.1 m³ = 0.1 m³
Converting the pressure to kilopascals (kPa):
P = 7 bar * 100 kPa/bar
= 700 kPa
Substituting the values into the equation for work done, we have:
W = 700 kPa * 0.1 m³
= 70 kJ
Now, substituting the values of Q and W into the equation for ΔU, we get:
ΔU = 157.5 kJ - 70 kJ
= 87.5 kJ
Therefore, the change in internal energy of the fluid is 87.5 kJ.
Learn more about change in internal energy here https://brainly.com/question/3453679
#SPJ11
What is the name of the molecule shown below?
O A. 3-octyne
O B. 3-octene
O C. 2-octene
D. 2-octyne
MnO2(s)+Cu(s)→Cu2+(aq)+Mn2+(aq)
Express your answer as a chemical equation. Identify
all of the phases in your answer.
Redox reaction in acidic solution
The balanced chemical equation for the redox reaction between solid manganese dioxide (MnO2) and solid copper (Cu) in acidic solution can be written as: MnO2(s) + 4H+(aq) + 2Cu(s) → 2Cu2+(aq) + Mn2+(aq) + 2H2O(l)
In this equation, the phases of each species are indicated as follows:
MnO2(s) - Solid manganese dioxide
4H+(aq) - Aqueous hydrogen ions (acidic solution)
2Cu(s) - Solid copper
2Cu2+(aq) - Aqueous copper(II) ions
Mn2+(aq) - Aqueous manganese(II) ions
2H2O(l) - Liquid water
Note that the presence of hydrogen ions (H+) in the reaction indicates that the reaction occurs in an acidic solution.
To learn more about equation visit;
https://brainly.com/question/29657983
#SPJ11
Is tert-butoxide anion a strong enough base to react with water? In other words, can a solution of potassium tert-butoxide be prepared in water? The pKa of ter-butyl alcohol is approximately 18. (pKa of water = 15.74). 1. Is tert-butoxide anion a strong enough base to react with water? In other words, can a solution of potassium tert-butoxide be prepared in water? The pKa of ter-butyl alcohol is approximately 18. (pKa of water = 15.74).
Yes, tert-butoxide anion (t-BuO-) is a strong enough base to react with water. A solution of potassium tert-butoxide can be prepared in water.
The pKa values are a measure of acidity, where lower pKa values indicate stronger acids. Conversely, higher pKa values indicate weaker acids. In the case of tert-butyl alcohol (t-BuOH), which can deprotonate to form tert-butoxide anion (t-BuO-), its pKa is approximately 18.
Comparing the pKa of t-BuOH with the pKa of water (15.74), we can see that water is a weaker acid than t-BuOH. Therefore, t-BuO- can act as a stronger base than water.
When a strong base like t-BuO- is added to water, it will react with water to form hydroxide ions (OH-) through the following equilibrium reaction:
t-BuO- + H2O ⇌ t-BuOH + OH-
This reaction results in an increase in the concentration of hydroxide ions (OH-) in the solution, making it basic.
Based on the comparison of pKa values, tert-butoxide anion (t-BuO-) is a strong enough base to react with water, allowing the preparation of a solution of potassium tert-butoxide in water.
To know more about potassium visit,
https://brainly.com/question/24527005
#SPJ11
Which are the major organic products of this reaction? A) Methanol + 2-bromo-2-methylpropane B) Bromomethane + 2-bromo-2-methylpropane C) Bromomethane \( +t \)-butanol D) Methanol \( +t \)-butanol E)
The major organic products of the given reaction are 2-bromo-2-methylpropane and methanol. Therefore the correct option is A.
In the given reaction, different combinations of organic compounds are reacted to form new products. Let's analyze each option:
A) Methanol + 2-bromo-2-methylpropane:
When methanol and 2-bromo-2-methylpropane react, no significant chemical transformation occurs since both compounds are stable and do not readily undergo reactions with each other. Therefore, this combination does not produce any major organic products.
B) Bromomethane + 2-bromo-2-methylpropane:
The reaction between bromomethane and 2-bromo-2-methylpropane would likely result in an exchange of the bromine atoms, leading to the formation of 2-bromo-2-methylpropane and bromomethane. This exchange reaction occurs due to the nucleophilic substitution of the bromine atoms in the compounds.
C) Bromomethane + t-butanol:
The reaction between bromomethane and t-butanol could result in the nucleophilic substitution of the bromine atom in bromomethane by the hydroxyl group of t-butanol. This substitution would form t-butyl bromide and methanol as the major organic products.
D) Methanol + t-butanol:
No significant reaction is expected to occur between methanol and t-butanol since both compounds are relatively stable and do not readily react with each other.
Based on the analysis, the major organic products of the given reaction are 2-bromo-2-methylpropane and methanol, corresponding to option A.
To know more about 2-bromo-2-methylpropane click here :
https://brainly.com/question/32360611
#SPJ11
In a chemical reaction, exactly 2 mol of substance A react to produce exactly 3 mol of substance B. 2A-3B How many molecules of substance B are produced when 25.2 g of substance A reacts? The molar ma
The 2.28 x 1023 molecules of substance B are produced when 25.2 g of substance A reacts.
The given chemical equation is 2A → 3B. This equation can be interpreted as follows:
For every 2 moles of A that react, 3 moles of B are produced. Therefore, we can calculate the number of moles of substance A in 25.2 g using the given molar mass. The molar mass (M) of substance A is not given in the question, so let's assume it is 100 g/mole (just for the sake of the example). Therefore, the number of moles of substance A (n) is: n = m/ M n = 25.2 g / 100 g/mole n = 0.252 mole
According to the equation, every 2 moles of substance A produce 3 moles of substance B.
Therefore, the number of moles of B produced (x) is given by: x/n = 3/2x = (3/2) * n = (3/2) * 0.252 mole = 0.378 mole
Now, we can calculate the number of molecules of B produced using Avogadro's number (NA) and the number of moles of B (x):Number of molecules of B = x * NA= 0.378 m o l * 6.022 x 1023 mol-1= 2.28 x 1023 molecules
Therefore, 2.28 x 1023 molecules of substance B are produced when 25.2 g of substance A reacts.
to know more about Avogadro's number visit :
https://brainly.com/question/30340397
#SPJ11
Consider the following chemical reaction.
2 Fe2O3 + 196500 cal -----> 4 Fe + 3 O2
A reaction using iron(III) oxide (Fe2O3) requires 598000
calories. How many grams of iron (Fe) were produced?
In a reaction using iron(III) oxide ([tex]Fe_{2} O_{3}[/tex]), which requires 598,000 calories, and the mass of iron (Fe) produced in the reaction is 1419.17 grams.
The given reaction equation states that 2 moles of [tex]Fe_{2} O_{3}[/tex][tex]Fe_{2} O_{3}[/tex] produce 4 moles of Fe. We can use this stoichiometric ratio to calculate the moles of Fe produced.
First, we convert the given amount of energy from calories to joules by multiplying by a conversion factor:
598,000 cal * 4.184 J/cal = 2,498,832 J
Next, we use the energy value to calculate the number of moles of Fe produced using the enthalpy change per mole of [tex]Fe_{2} O_{3}[/tex]:
2,498,832 J * (1 mol [tex]Fe_{2} O_{3}[/tex] / 196,500 J) * (4 mol Fe / 2 mol [tex]Fe_{2} O_{3}[/tex]) = 25.35 mol Fe
To determine the mass of Fe produced, we multiply the number of moles of Fe by its molar mass:
25.35 mol Fe * 55.845 g/mol = 1419.17 g
Therefore, approximately 1419.17 grams of iron (Fe) were produced in the given reaction.
Learn more about Fe here: https://brainly.com/question/30673242
#SPJ11