If the rate of consumption of NH3 is given by the expression [tex]$-\frac{d[NH_3]}{dt}$[/tex], then the rate of formation of N2 would be [tex]$(\frac{1}{2})\cdot \frac{d[N_2]}{dt}$[/tex].
For the given reaction, we want to determine the rate of formation of N2, which is the product of the reaction.
The rate of formation of N2 can be related to the rate of consumption of NH3, which is one of the reactants. To do this, we need to use the stoichiometry of the reaction to determine the appropriate conversion factor.
From the balanced chemical equation, we can see that 2 moles of NH3 react to form 1 mole of N2. Therefore, the rate of formation of N2 is related to the rate of consumption of NH3 by a factor of 1/2.
To see why this is the case, consider the following: if we start with a certain rate of consumption of NH3, then this will result in a corresponding rate of formation of N2, which is half of the rate of consumption of NH3. This is because for every 2 moles of NH3 consumed, only 1 mole of N2 is formed, as per the stoichiometry of the reaction.
Therefore, to get the rate of formation of N2, we need to multiply the rate of consumption of NH3 by 1/2. In other words, if the rate of consumption of NH3 is given by the expression [tex]$-\frac{d[NH_3]}{dt}$[/tex], then the rate of formation of N2 would be [tex]$(\frac{1}{2})\cdot \frac{d[N_2]}{dt}$[/tex].
In summary, to relate the rate of formation of N2 to the rate of consumption of NH3 for the given reaction, we need to use the stoichiometry of the reaction and multiply the rate of consumption of NH3 by a factor of 1/2.
To lear more about rate of consumption refer here:
https://brainly.com/question/3139415
#SPJ11
A typical airbag in a car is 139 liters. How many grams of sodium azide needs to be loaded into an airbag to fully inflate it at standard temperature and pressure?
Approximately 0.268 grams of sodium azide needs to be loaded into the airbag to fully inflate it at standard temperature and pressure.
To calculate the amount of sodium azide required to inflate an airbag, we first need to understand the chemical reaction that takes place. The sodium azide reacts with the potassium nitrate inside the airbag to produce nitrogen gas, which inflates the bag. The reaction is as follows:
[tex]2NaN_3 + 2KNO_3 \rightarrow3N_2 + 2Na_2O + K_2O[/tex]
From the balanced chemical equation, we can see that 2 moles of sodium azide (NaN3) react to produce 3 moles of nitrogen gas (N2).
The volume of the airbag is given as 139 liters, which is equivalent to 0.139 cubic meters. At standard temperature and pressure (STP), the volume of one mole of gas is 22.4 liters. Therefore, the number of moles of nitrogen gas required to fill the airbag is:
n = V/STP = 0.139/22.4 = 0.00620 moles
To produce 3 moles of nitrogen gas, we need 2 moles of sodium azide. Therefore, the number of moles of sodium azide required is:
n(NaAzide) = (2/3) x n(N2) = (2/3) x 0.00620 = 0.00413 moles
The molar mass of sodium azide is 65 grams/mole. Therefore, the mass of sodium azide required to inflate the airbag is:
Mass = n(NaAzide) x Molar mass = 0.00413 x 65 = 0.268 grams
For more such questions on sodium azide
https://brainly.com/question/28379904
#SPJ11
To fully inflate an airbag, about 50 grams of sodium azide is required. This chemical is stored in the airbag and when the sensor detects a crash, it is ignited, producing nitrogen gas which inflates the bag.
Sodium azide is a highly toxic and explosive substance, and must be handled with great care during the manufacturing and installation of airbags. Once the airbag is deployed, the nitrogen gas produced by the reaction of sodium azide with a metal oxide is harmless and rapidly dissipates into the atmosphere.It is important to note that tampering with an airbag or attempting to remove sodium azide from an airbag is extremely dangerous and should never be attempted. Only trained professionals should handle airbag installation and removal.
Learn more about sodium here:
brainly.com/question/28379904
#SPJ11
Each marble bag sold by dante’s marble company contains 5 yellow marbles for every 8 orange marbles. If a bad has 35 yellow marbles, how many marbles does it contain?
The bag contains 56 marbles. (35 yellow marbles can be expressed in the ratio as 5 yellow marbles for every 8 orange marbles.)
If a bag contains 35 yellow marbles, we can determine the total number of marbles in the bag using the given ratio. According to the ratio provided, for every 5 yellow marbles, there are 8 orange marbles. We can set up a proportion to find the total number of marbles in the bag.
Let x be the total number of marbles in the bag. The proportion can be written as: 5 yellow marbles / 8 orange marbles = 35 yellow marbles / x
Cross-multiplying, we get: 5x = 35 * 8
5x = 280
Dividing both sides by 5, we find: x = 56
Therefore, the bag contains 56 marbles.
According to the given ratio of 5 yellow marbles for every 8 orange marbles, we can set up a proportion to find the total number of marbles in the bag. By cross-multiplying, we find that 5 times the total number of marbles is equal to 35 times 8. Simplifying the equation, we get 5x = 280. Dividing both sides of the equation by 5, we find that the total number of marbles in the bag, represented by x, is equal to 56. Therefore, the bag contains 56 marbles in total. The given information of having 35 yellow marbles helps us determine the overall quantity of marbles in the bag using the provided ratio.
LEARN MORE ABOUT marbles here: brainly.com/question/32534055
#SPJ11
A statistics professor finds that when she schedules an office hour for student help, an average of 1.9 students arrive. Find the probability that in a randomly selected office hour, the number of student arrivals is 7.
To find the probability that in a randomly selected office hour the number of student arrivals is 7, we can use the Poisson distribution formula.
The Poisson distribution is used to model the probability of a certain number of events occurring within a fixed interval of time or space, given the average rate of occurrence.
In this case, the average number of student arrivals is 1.9.
The probability of exactly k events occurring in a Poisson distribution is given by the formula:
P(X=k) = (e^(-λ) * λ^k) / k!
Where λ is the average rate of occurrence.
Using this formula, we can calculate the probability of exactly 7 student arrivals in the given office hour:
P(X=7) = (e^(-1.9) * 1.9^7) / 7!
Calculating this expression will give us the desired probability.
Note: The value of e in the formula represents the base of the natural logarithm and is approximately equal to 2.71828.
To learn more about Poisson click here:brainly.com/question/31019106
#SPJ11
calculate the enthalpy change for the following reaction given: dc-h= 414 kj/mol, dcl-cl=243 kj/mol, dc-cl=339 kj/mol, dh-cl=431 kj/mol. ch4 cl2 → ch3cl hcl
To calculate the enthalpy change for the given reaction: CH4 + Cl2 → CH3Cl + HCl, we will use the bond enthalpies provided (DC-H, DCl-Cl, DC-Cl, DH-Cl). We'll follow these steps:
1. Determine the bonds broken in the reactants.
2. Determine the bonds formed in the products.
3. Calculate the total enthalpy change for the reaction.
Step 1: Bonds broken in reactants:
- 1 DC-H bond in CH4 (414 kJ/mol)
- 1 DCl-Cl bond in Cl2 (243 kJ/mol)
Step 2: Bonds formed in products:
- 1 DC-Cl bond in CH3Cl (339 kJ/mol)
- 1 DH-Cl bond in HCl (431 kJ/mol)
Step 3: Calculate the total enthalpy change for the reaction:
Enthalpy change = (Σ bond enthalpies of bonds broken) - (Σ bond enthalpies of bonds formed)
Enthalpy change = (414 kJ/mol + 243 kJ/mol) - (339 kJ/mol + 431 kJ/mol)
Enthalpy change = (657 kJ/mol) - (770 kJ/mol)
Enthalpy change = -113 kJ/mol
The enthalpy change for the given reaction CH4 + Cl2 → CH3Cl + HCl is -113 kJ/mol.
To know more about CH4 + Cl2 → CH3Cl + HCl refer here
https://brainly.com/question/24141694#
#SPJ11
what is the return value of the following function call? assume that infd is a valid file descriptor. lseek(infd, 0, seek_end); -1 1 0 the file size in bytes of the file corresponding to infd
The possible return values of this function call are:
If the function call succeeds, it returns the file size in bytes of the file corresponding to infd.
If the function call fails, it returns -1 and sets errno to indicate the error.
The return value of the function call lseek(infd, 0, SEEK_END) depends on whether it succeeds or fails. The lseek() function is used to change the file offset of the open file associated with the file descriptor infd. In this case, the function call sets the file offset to the end of the file.
If the function call succeeds, it returns the resulting file offset as a off_t type value. In this case, the resulting file offset will be the file size in bytes of the file corresponding to infd.
If the function call fails, it returns -1 and sets errno to indicate the error. Possible errors include EBADF if infd is not a valid file descriptor, ESPIPE if infd refers to a pipe or FIFO, or EINVAL if the whence argument (in this case, SEEK_END) is invalid.
Click the below link, to learn more about return value of function call:
https://brainly.com/question/12939282
#SPJ11
What nuclide is produced in thecore cf acollapsing giant star by eachoftre following reaction? Part 1 Scu-3" B - % 2-{870 Part 2 {zn- 18 = aiGa Part 3 Jisr -& P- %+8
During the collapse of a giant star, the iron core undergoes many nuclear reactions and eventually collapses to form a neutron star or a black hole.
Part 1: In the reaction Sc-30 + 7B-10 -> 37Cl-37 + 1n-1, one neutron is produced along with chlorine-37. However, during the collapse of a giant star, many nuclear reactions occur, and it is difficult to determine which specific reaction leads to the production of chlorine-37.
Part 2: In the reaction Zn-68 + 13Al-27 -> 81Ga-95 + 2n-1, two neutrons are produced along with gallium-81. Similarly to Part 1, it is difficult to determine which specific reaction leads to the production of gallium-81 during the collapse of a giant star.
Part 3: In the reaction Fe-56 + 1n-1 -> Mn-55 + 1H-1, a proton and manganese-55 are produced. However, during the collapse of a giant star, the iron core undergoes many nuclear reactions and eventually collapses to form a neutron star or a black hole, and it is difficult to determine which specific reaction leads to the production of manganese-55.
Click the below link, to learn more about nuclide:
https://brainly.com/question/32085983
#SPJ11
Fatty acid degradation proceeds through repeated cycles of Boxidation with each cycle containing four reactions. Arrange the four enzymes that catalyze these reactions in order from first to last. 3-hydroxyacyl-COA dehydrogenase Acyl-CoA dehydrogenase B-ketoacyl-CoA thiolase Enoyl-CoA hydratase
The order of the four enzymes that catalyze the reactions in the fatty acid degradation cycle, from first to last, is as follows :- Acyl-CoA dehydrogenase, Enoyl-CoA hydratase, B-ketoacyl-CoA thiolase, 3-hydroxyacyl-COA dehydrogenase.
The enzymes are arranged in the order in which they act on the fatty acid molecule during each cycle of the degradation.
During each cycle of the fatty acid degradation, the acyl-CoA molecule is oxidized by acyl-CoA dehydrogenase to produce a trans-Δ2-enoyl-CoA. The enoyl-CoA molecule is then hydrated by enoyl-CoA hydratase to produce a β-hydroxyacyl-CoA.
This molecule is then oxidized by 3-hydroxyacyl-COA dehydrogenase to produce a β-ketoacyl-CoA. Finally, this molecule is cleaved by B-ketoacyl-CoA thiolase to produce acetyl-CoA and a new, shorter acyl-CoA molecule, which can enter another cycle of the fatty acid degradation.
To know more about enzymes refer here :-
https://brainly.com/question/17292676#
#SPJ11
classify the bonds as ionic, polar covalent, or nonpolar covalent. n-f se-cl rb-f na-f f-f i-i
Ionic bonds are formed between a metal and a nonmetal, where one atom loses one or more electrons to another atom that gains those electrons.
Polar covalent bonds are formed between two nonmetals that share electrons unequally, creating partial positive and negative charges. Nonpolar covalent bonds are formed between two nonmetals that share electrons equally, creating no partial charges. Using this information, we can classify the bonds as follows:
N-F: Polar covalent bond
Se-Cl: Polar covalent bond
Rb-F: Ionic bond
Na-F: Ionic bond
F-F: Nonpolar covalent bond
I-I: Nonpolar covalent bond
Note that for N-F and Se-Cl, the electronegativity difference between the atoms is greater than 0.5 but less than 1.7, so the bonds are considered polar covalent. For Rb-F and Na-F, the electronegativity difference is greater than 1.7, so the bonds are considered ionic. For F-F and I-I, the electronegativity difference is zero, so the bonds are considered nonpolar covalent.
For more questions like bonds visit the link below:
https://brainly.com/question/7140445
#SPJ11
identify which compound is more acidic and explain your choice: acetophenone or benzaldehyde
Benzaldehyde is more acidic than acetophenone because its conjugate base is more stable, allowing for better delocalization of the negative charge over the entire phenyl ring.
To determine which compound is more acidic between acetophenone and benzaldehyde, we need to consider their molecular structures and the stability of their conjugate bases.
Understand the molecular structures of acetophenone and benzaldehyde.
Acetophenone has a structure of C6H5C(O)CH3, where a carbonyl group is attached to a methyl group and a phenyl group. Benzaldehyde has a structure of C6H5CHO, where a carbonyl group is directly attached to a phenyl group.
Consider the stability of their conjugate bases.
When a compound loses a hydrogen ion (H+), it forms a conjugate base. A more stable conjugate base indicates a more acidic compound. The conjugate bases of acetophenone and benzaldehyde are formed by losing a hydrogen ion from their carbonyl groups, resulting in a negative charge on the oxygen atom.
Compare the conjugate base stability.
Benzaldehyde's conjugate base has a more stable resonance structure due to the direct attachment of the carbonyl group to the phenyl group, allowing for better delocalization of the negative charge over the entire phenyl ring. In contrast, acetophenone's conjugate base has a less stable resonance structure because the negative charge cannot be delocalized over the entire phenyl ring due to the presence of the methyl group.
In conclusion, benzaldehyde is more acidic than acetophenone because its conjugate base is more stable, allowing for better delocalization of the negative charge over the entire phenyl ring.
Learn more about benzaldehyde
brainly.com/question/31684857
#SPJ11
write the net ionic equation for the acid‑base reaction. include physical states. hclo4(aq) koh(aq)⟶h2o(l) kclo4(aq)
The net ionic equation for the acid-base reaction between perchloric acid (HClO₄) and potassium hydroxide (KOH) is: H⁺(aq) + OH⁻(aq) ⟶ H₂O(l)
The HClO₄ dissociates in water to form H⁺ ions and ClO₄⁻ ions, while KOH dissociates to form K⁺ ions and OH⁻ ions. In the reaction, the H⁺ ion from the acid reacts with the OH⁻ ion from the base to form water.
While the K⁺ ion and ClO₄⁻ ion remain in solution and are spectator ions. Therefore, they are not included in the net ionic equation.
It's worth noting that the perchloric acid (HClO₄) and potassium hydroxide (KOH) are both strong acids and bases, respectively, meaning that they completely dissociate in water.
This makes the reaction a neutralization reaction, which involves the combination of an acid and a base to form water and a salt. In this case, the salt formed is KClO₄.
To know more about perchloric acid, refer here:
https://brainly.com/question/30780596#
#SPJ11
calculate the amount of heat required to heat 725 g of water from 22.1oc to 100.0oc. (swater = 4.184jg-1oc-1) A. 236.3 kJB. 15.3 kJC. 0.51 kJD. -64.1 kJ
The amount of heat required to heat 725 g of water from 22.1oC to 100.0oC is approximately 236.3 kJ.
To calculate the amount of heat required to heat 725 g of water from 22.1oC to 100.0oC, we can use the formula:
Q = m × c × ΔT
where Q is the amount of heat, m is the mass of the water, c is the specific heat capacity of water, and ΔT is the change in temperature.
Substituting the given values, we get:
Q = 725 g × 4.184 J/g.oC × (100.0oC - 22.1oC)
Q = 725 g × 4.184 J/g.oC × 77.9oC
Q = 236337.08 J or 236.3 kJ (rounded to one decimal place)
Therefore, the amount of heat required to heat 725 g of water from 22.1oC to 100.0oC is approximately 236.3 kJ. This is a significant amount of heat and highlights the importance of understanding the properties of water when studying thermodynamics and heat transfer.
To know more about heat capacity of water visit:
https://brainly.com/question/24130199
#SPJ11
Which separation technique(s) would you use to separate copper (II) sulfate from carbon? Describe how you would separate the components of the given mixture?
The separation technique that would be used to separate copper (II) sulfate from carbon is filtration, followed by the evaporation of the solvent.
Filtration is the best method to use since it separates solids from liquids. The mixture can be poured onto a filter paper, and the copper (II) sulfate will dissolve in the water and pass through the filter paper while the carbon remains behind.
Once the copper (II) sulfate is separated from the carbon, it can be retrieved by evaporating the solvent leaving the solid copper (II) sulfate behind. This method works because copper (II) sulfate is a water-soluble compound while carbon is not.
By using filtration and evaporation, we can separate both components of the mixture.
Learn more about components here.
https://brainly.com/questions/13488004
#SPJ11
how many kilograms of co₂ equivalents are emitted in the production and post-farmgate processing of 23 kg of pork?
Answer:The carbon footprint of pork varies depending on the location and the production methods used. On average, the carbon footprint of pork production is estimated to be around 3.8 kg CO2e per kg of pork.
So for 23 kg of pork, the total carbon footprint would be:
3.8 kg CO2e/kg * 23 kg = 87.4 kg CO2e
Therefore, approximately 87.4 kg of CO2 equivalents are emitted in the production and post-farmgate processing of 23 kg of pork.
learn more about equivalents
https://brainly.com/question/25197597?referrer=searchResults
#SPJ11
Finally, what mass of Na2HPO4 is required? Again, assume a 1. 00 L volume buffer solution.
Target pH = 7. 37
Acid/Base pair: NaH2PO4/Na2HPO4
pKa = 7. 21
[Na2HPO4] > [NaH2PO4]
[NaH2PO4] = 0. 100 M
12. 0 g NaH2PO4 required
[base]/[acid] = 1. 45
[Na2HPO4] = 0. 145 M
The mass of Na2HPO4 required to prepare a buffer solution with a target pH of 7.37, we need to consider the Henderson-Hasselbalch equation and the acid/base pair involved in the buffer system.
The Henderson-Hasselbalch equation is given by:
pH = pKa + log([base]/[acid])
Given:
Target pH = 7.37
pKa = 7.21
[base]/[acid] = 1.45
To achieve the target pH, we need to calculate the concentration of Na2HPO4 ([base]) and NaH2PO4 ([acid]) in the buffer solution.
Using the Henderson-Hasselbalch equation, we can rearrange it to solve for [base]/[acid]:
[base]/[acid] = 10^(pH - pKa)
Substituting the given values:
[base]/[acid] = 10^(7.37 - 7.21)
[base]/[acid] = 1.45
We are given [NaH2PO4] = 0.100 M, which represents [acid]. Therefore, we can calculate [base] as:
[base] = 1.45 × [acid]
[base] = 1.45 × 0.100 M
[base] = 0.145 M
Now, we need to calculate the mass of Na2HPO4 required to obtain a concentration of 0.145 M.
Molar mass of Na2HPO4 = 22.99 g/mol + 22.99 g/mol + 79.97 g/mol + 16.00 g/mol + 16.00 g/mol = 157.94 g/mol
Mass = moles × molar mass
Mass = 0.145 mol × 157.94 g/mol
Mass = 22.89 g
Therefore, approximately 22.89 grams of Na2HPO4 is required to prepare the buffer solution with a 1.00 L volume and a target pH of 7.37.
Learn more about Henderson-Hasselbalch equation here
https://brainly.com/question/31495136
#SPJ11
An inert electrode must be used when one or more species involved in the redox reaction are:Select the correct answer below:good conductors of electricitypoor conductors of electricityeasily oxidizedeasily reduced
An inert electrode must be used when one or more species involved in the redox reaction are poor conductors of electricity. Inert electrodes, like graphite or platinum, do not participate in the reaction and only serve as a surface for the transfer of electrons.
An inert electrode must be used when one or more species involved in the redox reaction are easily oxidized or easily reduced. This is because if a reactive electrode is used, it could participate in the reaction itself and affect the overall outcome of the reaction.
Inert electrodes, on the other hand, do not participate in the reaction and only serve as a conductor of electricity. Therefore, the correct answer to the question is either "easily oxidized" or "easily reduced."
To know more about electrode visit :-
https://brainly.com/question/17060277
#SPJ11
Answer:
poor conductors of electricity
Explanation:
If a substance involved in the redox reaction conducts electricity poorly, it cannot serve as an effective electrode. In this case, an inert electrode can be used to act as an electron sink or source in solution.
the conversion of 4-pentanoylbiphenyl to 4-pentanylbiphenyl with hydrazine and potassium hydroxide is an overall of carbon? a. oxidation b. not a redox c. reduction
The conversion of 4-pentanoylbiphenyl to 4-pentanylbiphenyl with hydrazine and potassium hydroxide is a reduction . Option c. is correct.
Because it involves the addition of hydrogen atoms to the carbon atoms in the molecule, resulting in a decrease in the oxidation state of the carbons. During the reaction, hydrazine acts as a reducing agent and reduces the ketone group (-[tex]CO^-[/tex]) to an alcohol group (-[tex]CH_2OH[/tex]). This reduction results in the conversion of the carbonyl carbon from sp2 hybridization to sp3 hybridization, resulting in the formation of a new C-H bond.
Therefore, the reaction involves a gain of electrons by the carbonyl carbon, and a reduction of the ketone functional group. There is no simultaneous oxidation of any other species in the reaction.
Therefore, the reaction is a reduction and not an oxidation or a non-redox reaction. Hence, option c. is correct.
To know more about Reduction refer here :
https://brainly.com/question/4222605
#SPJ11
given this reaction: 2nh3(g)<--->n2(g) 3h2(g) where delta g rxn= 16.4kj/mol; delta h rxn=91.8 kj/mol. the standard molar enthalpy of formation in KJmol −1 of NH3 (g) is
The standard molar enthalpy of formation of NH3(g) is 45.9 kJ/mol.
The standard molar enthalpy of formation of NH3(g) can be calculated using the given values of delta G_rxn and delta H_rxn for the reaction 2NH3(g) <---> N2(g) + 3H2(g).
Using the relation ΔG = ΔH - TΔS, we can first calculate the standard molar entropy change (ΔS) for the reaction. Given that ΔG_rxn = 16.4 kJ/mol and ΔH_rxn = 91.8 kJ/mol, we can rearrange the equation to ΔS = (ΔH - ΔG)/T. Assuming standard conditions (T = 298.15 K), we can calculate ΔS as:
ΔS = (91.8 kJ/mol - 16.4 kJ/mol) / 298.15 K = 0.253 kJ/mol*K
Now, we can use the standard entropy change to calculate the standard molar enthalpy of formation for NH3(g). For the given reaction, the change in the number of moles of gas is:
Δn_gas = 3 - 2 = 1
The standard molar enthalpy of formation of NH3(g) can be expressed as:
ΔH_formation(NH3) = ΔH_rxn / 2 - Δn_gas * R * T * ΔS
Using the given values and the gas constant R = 8.314 J/mol*K, we can calculate the standard molar enthalpy of formation for NH3(g) as:
ΔH_formation(NH3) = (91.8 kJ/mol) / 2 - 1 * (8.314 J/mol*K) * 298.15 K * (0.253 kJ/mol*K) = 45.9 kJ/mol
Therefore, the standard molar enthalpy of formation of NH3(g) is 45.9 kJ/mol.
Know more about Standard molar enthalpy of formation here:
https://brainly.com/question/10583725
#SPJ11
When dissolved in water, of HClO4, Ca(OH)2, KOH, HI, which are bases?
Question 5 options:
1) Ca(OH)2 and KOH
2) only HI
3) HClO4 and HI
4) only KOH
When dissolved in water, Ca(OH)2 and KOH are bases. HClO4 and HI are acids. The correct option is (1).
A substance is classified as a base if it accepts protons (H+) when dissolved in water. Ca(OH)2 and KOH both contain hydroxide ions (OH-) that readily accept protons from water, making them bases. On the other hand, HClO4 and HI are both acids.
HClO4 is a strong acid, meaning that it dissociates completely in water, releasing H+ ions. HI is also an acid, as it contains hydrogen ions that are readily released in water.
The basicity or acidity of a substance is determined by its ability to donate or accept protons in a solution. The pH scale, which ranges from 0 to 14, measures the acidity or basicity of a solution.
A pH value below 7 indicates acidity, while a pH above 7 indicates basicity. The neutrality point is pH 7, which corresponds to a solution with an equal concentration of H+ and OH- ions.
To know more about "Basicity" refer here:
https://brainly.com/question/32036292#
#SPJ11
Calcium phosphate used in fertilizers can be
made in the reaction described by the fol-
lowing equation:
2H3PO4(aq) + 3Ca(OH)(aq) —
Ca3(PO4)2(s) + 6H2O(aq)
What mass in grams of each product would
be formed if 7. 5 L of 5. 00 M phosphoric acid
reacted with an excess of calcium hydroxide?
To determine the mass of each product formed in the reaction between 7.5 L of 5.00 M phosphoric acid and an excess of calcium hydroxide, the stoichiometry of the reaction needs to be considered. The molar ratio between the reactants and products can be used to calculate the mass of each product.
The balanced equation for the reaction is [tex]2H_3PO_4(aq) + 3Ca(OH)_2(aq)[/tex] → [tex]Ca_3(PO_4)_2(s) + 6H_2O(aq).[/tex]
First, we need to calculate the number of moles of phosphoric acid used. To do this, we multiply the volume (7.5 L) by the molarity (5.00 M) to obtain the moles of H3PO4: 7.5 L × 5.00 mol/L = 37.5 mol.
Based on the stoichiometry of the reaction, we know that for every 2 moles of [tex]H_3PO_4[/tex], 1 mole of [tex]Ca_3(PO_4)_2[/tex] is formed. Therefore, the moles of [tex]Ca_3(PO_4)_2[/tex] formed can be calculated as 37.5 mol.
To calculate the mass of [tex]Ca_3(PO_4)_2[/tex] formed, we need to know the molar mass of [tex]Ca_3(PO_4)_2[/tex], which is 310.18 g/mol. Therefore, the mass of [tex]Ca_3(PO_4)_2[/tex] formed is 18.75 mol × 310.18 g/mol = 5,801.25 g.
Since water is also a product, we can calculate the moles of water formed as 6 times the moles of [tex]Ca_3(PO_4)_2[/tex]: 18.75 mol [tex]Ca_3(PO_4)_2[/tex] × 6 mol H2O / 1 mol [tex]Ca_3(PO_4)_2[/tex] = 112.5 mol [tex]H_2O[/tex].
The molar mass of water is 18.015 g/mol, so the mass of water formed is 112.5 mol × 18.015 g/mol = 2,023.12 g.
In summary, when 7.5 L of 5.00 M phosphoric acid reacts with an excess of calcium hydroxide, approximately 5,801.25 grams of calcium phosphate [tex]Ca_3(PO_4)_2[/tex] and 2,023.12 grams of water would be formed.
Learn more about molar ratio here:
https://brainly.com/question/30930200
#SPJ11
the smallest part of a crystal that retains the geometric shape of the crystal is a
A unit cell.
A unit cell is the smallest repeating unit of a crystal lattice that, when repeated in all directions, generates the entire crystal structure.
It retains the same geometric shape and symmetry as the larger crystal structure, which means that the properties of the crystal can be determined from the properties of its unit cell.
The unit cell contains one or more atoms or ions and is defined by its dimensions and angles between its sides. Understanding the unit cell is essential to understanding the physical and chemical properties of crystals, and it is a fundamental concept in materials science, chemistry, and solid-state physics.
Learn more about unit cell here:
https://brainly.com/question/31627817
#SPJ11
which complex species will exhibit optical isomerism? a. [pt(en)cl2] b. [co(en)cl4]- c. trans-[cr(en)2brcl] d. cis-[co(ox)2br2]-
The complex species that will exhibit optical isomerism is; rans-[Cr(en)2BrCl]. Option C is correct.
The complex must have at least one chiral center (tetrahedral or octahedral) and no internal plane of symmetry to exhibit optical isomerism.
trans-[cr(en)2brcl] has two bidentate ethylenediamine (en) ligands that are geometrically different due to the presence of two different axial ligands (Br and Cl) in trans positions, resulting in a tetrahedral chiral center.
Optical isomerism, also known as enantiomerism, is a type of stereoisomerism that occurs when a molecule has a non-superimposable mirror image. In other words, two molecules are optical isomers if they are identical in every way except that they are mirror images of each other, like left and right hands.
Hence, C. is the correct option.
To know more about plane of symmetry here
https://brainly.com/question/30215725
#SPJ4
using the experimental data for pH and the concentration of the solutions, calculate the Ka and Kb for each salt and show your work
solution / value of Ka or Kb
0.1 ZnCl2 0.1 K Al(SO4)2 0.1 NH4Cl 0.1 NaC2H3O2 0.1 Na2CO3
what is the ph of a solution that is 0.10 m hc2h3o2 and 0.10 m nac2h3o2 (the conjugate base)? ka of hc2h3o2 = 1.8 x 10-5
4.74 is the ph of a solution that is 0.10 m hc2h3o2 and 0.10 m nac2h3o2 (the conjugate base).
To determine the pH of this solution, we need to first calculate the concentration of the conjugate base, which is NaC2H3O2. Since the initial concentration of HC2H3O2 is 0.10 M and it reacts with NaOH in a 1:1 ratio, the concentration of the conjugate base is also 0.10 M.
Next, we can use the Ka value of HC2H3O2 to calculate the concentration of H+ ions in the solution:
Ka = [H+][C2H3O2-]/[HC2H3O2]
1.8 x 10^-5 = x^2 / (0.10 - x)
where x is the concentration of H+ ions
Solving for x, we get a concentration of 1.34 x 10^-3 M.
Now, we can use the pH formula to calculate the pH of the solution:
pH = -log[H+]
pH = -log(1.34 x 10^-3)
pH = 2.87
Therefore, the pH of the solution is 2.87.
The pH of a solution with 0.10 M HC2H3O2 and 0.10 M NaC2H3O2 can be determined using the Henderson-Hasselbalch equation. This equation relates the pH, pKa, and the ratio of the concentrations of the conjugate base (A-) and weak acid (HA).
Henderson-Hasselbalch equation: pH = pKa + log([A-]/[HA])
In this case, the weak acid (HA) is HC2H3O2 and its conjugate base (A-) is C2H3O2-. The Ka of HC2H3O2 is given as 1.8 x 10^-5. To find the pKa, use the formula:
pKa = -log(Ka) = -log(1.8 x 10^-5) ≈ 4.74
Since the solution is a buffer with equal concentrations of the weak acid and its conjugate base (0.10 M each), the ratio of [A-] to [HA] is 1.
Now, apply the Henderson-Hasselbalch equation:
pH = pKa + log([A-]/[HA]) = 4.74 + log(1) = 4.74
So, the pH of the solution is approximately 4.74.
To know more about conjugate base visit:
brainly.com/question/30225100
#SPJ11
Calculate the pH for each of the following cases in the titration of 35.0 mL of 0.220 M LiOH(aq), with 0.220 M HCl(aq). (a) before addition of any HCl (b) after addition of 13.5 mL of HCl (c) after addition of 25.5 mL of HCl (d) after the addition of 35.0 mL of HCl (e) after the addition of 40.5 mL of HCl (f) after the addition of 50.0 mL of HCl
The pH after the addition of 50.0 mL of HCl is 0.89.
The reaction between LiOH and HCl is:
LiOH(aq) + HCl(aq) → LiCl(aq) + [tex]H_2O[/tex](l)
Before any HCl is added, the solution contains only LiOH. Therefore, the initial concentration of hydroxide ions [OH-] is:
[OH-] = 0.220 mol/L
(a) Before any HCl is added:
In this case, the solution is a strong base, and the pH can be calculated using the equation:
pH = 14 - pOH
pH = 14 - log([OH-]) = 14 - log(0.220) = 11.66
(b) After addition of 13.5 mL of HCl:
The moles of HCl added is:
moles of HCl = (0.220 mol/L)(0.0135 L) = 0.00297 mol
After the addition of HCl, the total volume of the solution is:
V = 35.0 mL + 13.5 mL = 48.5 mL = 0.0485 L
The moles of LiOH remaining is:
moles of LiOH = (0.220 mol/L)(0.0350 L) = 0.00770 mol
The moles of OH- remaining is:
moles of OH- = 0.00770 mol - 0.00297 mol = 0.00473 mol
The concentration of OH- ions is:
[OH-] = moles of OH-/V = 0.00473 mol/0.0485 L = 0.0975 mol/L
The pOH is:
pOH = -log[OH-] = -log(0.0975) = 1.01
The pH is:
pH = 14 - pOH = 14 - 1.01 = 12.99
(c) After addition of 25.5 mL of HCl:
The moles of HCl added is:
moles of HCl = (0.220 mol/L)(0.0255 L) = 0.00561 mol
After the addition of HCl, the total volume of the solution is:
V = 35.0 mL + 25.5 mL = 60.5 mL = 0.0605 L
The moles of LiOH remaining is:
moles of LiOH = (0.220 mol/L)(0.0350 L) = 0.00770 mol
The moles of OH- remaining is:
moles of OH- = 0.00770 mol - 0.00561 mol = 0.00209 mol
The concentration of OH- ions is:
[OH-] = moles of OH-/V = 0.00209 mol/0.0605 L = 0.0345 mol/L
The pOH is:
pOH = -log[OH-] = -log(0.0345) = 1.46
The pH is:
pH = 14 - pOH = 14 - 1.46 = 12.54
(d) After addition of 35.0 mL of HCl:
The moles of HCl added is:
moles of HCl = (0.220 mol/L)(0.0350 L) = 0.00770 mol
After the addition of HCl, the total volume of the solution is:
V = 35.0 mL + 35.0 mL = 70.0 mL = 0.0700 L
The moles of LiOH remaining is:
moles of LiOH
(f) after the addition of 50.0 mL of HCl:
Before adding any HCl, the solution contains only LiOH, so we can use the Kb of LiOH to calculate the pOH and then convert to pH:
Kb for LiOH = Kw/Ka = 1.0 × 10^-14/2.0 × 10^-11 = 5.0 × 10^-4
pOH = -log(5.0 × 10^-4) = 3.3
pH = 14 - pOH = 10.7
After adding 50.0 mL of HCl, a total of 35.0 + 50.0 = 85.0 mL of solution is present, and the concentration of HCl is:
(0.220 M/L) × (50.0 mL/85.0 mL) = 0.129 M
This is a strong acid, so we can assume complete dissociation and calculate the pH using the concentration of H+:
pH = -log[H+] = -log(0.129) = 0.89
For more question on pH click on
https://brainly.com/question/172153
#SPJ11
LiOH(aq) and HCl(aq) react in a 1:1 molar ratio, meaning that the number of moles of HCl added to the solution is equal to the number of moles of LiOH originally present.
(a) Before the addition of any HCl:
The initial concentration of LiOH is 0.220 M, so the initial concentration of hydroxide ions, [OH-], can be calculated using the following equation:
LiOH → Li+ + OH-
Thus, [OH-] = 0.220 M.
The pOH of the solution can be calculated using the following equation:
pOH = -log[OH-] = -log(0.220) = 0.657
The pH of the solution can be calculated using the following equation:
pH = 14 - pOH = 14 - 0.657 = 13.343
Therefore, the pH of the solution before the addition of any HCl is 13.343.
(b) After the addition of 13.5 mL of HCl:
The amount of HCl added can be calculated using the following equation:
n(HCl) = C(HCl) x V(HCl) = 0.220 M x 0.0135 L = 0.00297 mol
Since HCl and LiOH react in a 1:1 molar ratio, the amount of LiOH remaining in the solution can be calculated as follows:
n(LiOH) = n(LiOH initial) - n(HCl added) = 0.220 M x 0.0350 L - 0.00297 mol = 0.00523 mol
The new volume of the solution is 35.0 mL + 13.5 mL = 48.5 mL.
The new concentration of LiOH can be calculated as follows:
C(LiOH) = n(LiOH) / V(solution) = 0.00523 mol / 0.0485 L = 0.108 M
The new concentration of hydroxide ions can be calculated using the following equation:
LiOH + HCl → LiCl + H2O
The reaction consumes 0.00297 mol of hydroxide ions, so the new concentration of hydroxide ions is:
[OH-] = (0.220 M x 0.0350 L - 0.00297 mol) / 0.0485 L = 0.064 M
The pOH of the solution can be calculated using the following equation:
pOH = -log[OH-] = -log(0.064) = 1.194
The pH of the solution can be calculated using the following equation:
pH = 14 - pOH = 14 - 1.194 = 12.806
Therefore, the pH of the solution after the addition of 13.5 mL of HCl is 12.806.
(c) After the addition of 25.5 mL of HCl:
The amount of HCl added can be calculated using the same equation as before:
n(HCl) = C(HCl) x V(HCl) = 0.220 M x 0.0255 L = 0.00561 mol
The amount of LiOH remaining in the solution can be calculated as follows:
n(LiOH) = n(LiOH initial) - n(HCl added) = 0.220 M x 0.0350 L - 0.00561 mol = 0.00389 mol
The new volume of the solution is 35.0 mL + 25.5 mL = 60.5 mL.
Learn more about LiOH(aq) and HCl(aq) here:
https://brainly.com/question/7082537
#SPJ11
What is the concentration of H+ in solution given the [OH] = 1.32 x 10^-4? A) 1.0 x 10^14 M B) 7.58 x 10^-11 M C) 1.32 x 10^-11 M D) not enough information E) none of the above
Option B) 7.58 x 10⁻¹¹ M is the concentration of H+ in solution given the [OH] = 1.32 x 10⁻⁴ will be 1.32 x 10⁻¹¹ M.
We can use the fact that the product of the concentration of hydrogen ions (H⁺) and hydroxide ions (OH⁻) in a solution is equal to 1 x 10⁻¹⁴ M² at 25°C. This is known as the ion product constant of water (Kw).
Mathematically, we can write:
Kw = [H⁺][OH⁻] = 1 x 10⁻¹⁴ M²
We are given the concentration of hydroxide ions as [OH⁻] = 1.32 x 10⁻⁴ M. We can use this information and the Kw equation to calculate the concentration of hydrogen ions:
[H⁺] = Kw / [OH⁻]
[H⁺] = (1 x 10⁻¹⁴ M²) / (1.32 x 10⁻⁴ M)
[H⁺] = 7.58 x 10⁻¹¹ M
Therefore, the concentration of H⁺ in solution is 7.58 x 10⁻¹¹ M, which is option B.
learn more about hydrogen here:
https://brainly.com/question/20309096
#SPJ11
Identify the following diagnostic procedure that gives the highest dose of radiation.upper gastrointestinal tract x-raychest x-raydental x-ray ? two bitewingsthallium heart scan
The diagnostic procedure that gives the highest dose of radiation is the thallium heart scan.
A thallium heart scan is a type of nuclear imaging test that uses a small amount of radioactive material, called thallium, to create images of the heart muscle. During the procedure, the patient receives an injection of the thallium, which travels through the bloodstream and accumulates in the heart muscle. A special camera is then used to detect the radioactive signal emitted by the thallium, which is used to create detailed images of the heart.
The thallium heart scan involves exposure to a higher dose of radiation compared to other diagnostic procedures such as an upper gastrointestinal tract x-ray, chest x-ray, or dental x-ray. This is because the thallium used in the test is a radioactive material and emits ionizing radiation that is detected by the camera. However, the amount of radiation used in the thallium heart scan is still considered safe for most people, and the benefits of the test usually outweigh the risks. The actual amount of radiation exposure will depend on factors such as the patient's body size and the specific imaging protocol used by the medical professional.
The diagnostic procedure that gives the highest dose of radiation among the options provided is the thallium heart scan. This procedure involves the use of a radioactive tracer (thallium) to assess the blood flow and function of the heart, and it exposes the patient to a higher dose of radiation compared to upper gastrointestinal tract x-rays, chest x-rays, and dental x-rays with two bitewings.
For more such questions on radiation , Visit:
https://brainly.com/question/29940486
#SPJ11
Among the diagnostic procedures listed, the thallium heart scan is the one that typically involves the highest dose of radiation.
A thallium heart scan, also known as myocardial perfusion imaging, is a nuclear medicine procedure used to assess the blood flow to the heart muscle. It involves the injection of a small amount of radioactive material (thallium) into the bloodstream, which is then detected by a gamma camera to create images of the heart. The radioactive material emits gamma radiation, and the level of radiation exposure during this procedure is relatively higher compared to other diagnostic tests. Therefore, the thallium heart scan is the diagnostic procedure that typically results in the highest dose of radiation.
Learn more about thallium heart scans here:
https://brainly.com/question/31169149
#SPJ11
what is the molar solubility of lead sulfate in 1.0 × 10–3 m na2so4? solubility product constant pbso4 ksp = 1.8 × 10–8 (a) 1.8 × 10–2 (c) 1.8 × 10–5 (b) 1.3 × 10–4 (d) 5.0 × 10–6
The molar solubility of lead sulfate in 1.0 × 10⁻³ m Na2So4 is (c) 1.8 × 10⁻⁵
The molar solubility of a compound is defined as the amount (in moles) of the compound that can dissolve in one liter of a solution. To determine the molar solubility of PbSO₄, we need to calculate the concentration of Pb2+ ions in the presence of 1.0 × 10⁻³ M Na₂SO₄.
The solubility product constant (Ksp) expression for lead sulfate (PbSO₄) is:
PbSO₄ (s) ↔ Pb₂+ (aq) + SO₄⁻²(aq)
The Ksp expression can be written as:
Ksp = [Pb₂][SO4⁻²]
In the presence of 1.0 × 10–3 M Na₂SO₄, the concentration of SO₄⁻² is already given. Therefore, we need to calculate the concentration of Pb₂+ ions in order to determine the molar solubility of PbSO₄.
Using the Ksp expression, we can write:
Ksp = [Pb₂+][SO₄²⁻]
1.8 × 10^-8 = [Pb₂+][SO₄²⁻]
[Pb₂+] = 1.8 × 10^-8 / [SO₄²⁻]
[Pb₂+] = 1.8 × 10^-8 / 0.001
[Pb₂+] = 1.8 × 10^-5 M
Therefore, the molar solubility of PbSO4 in 1.0 × 10⁻³ M Na₂SO₄ solution is 1.8 × 10⁻⁵ M.
Therefore, the correct answer is (c) 1.8 × 10⁻⁵.
To learn more about molar solubility here
https://brainly.com/question/31588030
#SPJ4
the /\g of a certain reaction is - 78.84 kj/mol at 25oc. what is the keq for this reaction?
The Keq for the reaction can be calculated using the equation ΔG° = -RTlnKeq, where ΔG° is the standard free energy change, R is the gas constant, T is the temperature in Kelvin, and Keq is the equilibrium constant.
In this case, ΔG° is -78.84 kJ/mol, and assuming standard conditions of 25°C (298 K) and 1 atm pressure, we can plug in the values and solve for Keq -78.84 kJ/mol = -8.314 J/K/mol * 298 K * ln Keq ,-78.84 kJ/mol = -24,736 J/mol * ln(Keq ln(Keq) = 78.84 kJ/mol / 24,736 J/mol ,ln(Keq) = -3.186 ,Keq = e^-3.186 ,Keq = 0.041 Therefore, the explanation is that the Keq for this reaction is 0.041.
Convert the given ΔG from kJ/mol to J/mol: -78.84 kJ/mol * 1000 J/kJ = -78840 J/mol, Convert the temperature from Celsius to Kelvin: 25°C + 273.15 = 298.15 K Use the gas constant, R, in J/(mol·K): R = 8.314 J/(mol·K) ,Rearrange the equation to solve for Keq: ln(Keq) = -ΔG/RT, Substitute the values into the equation: ln Keq = -78840 J/mol / (8.314 J/(mol·K) * 298.15 K, Calculate the value of ln(Keq): ln(Keq) ≈ 31.92 Find the Keq by taking the exponential of the ln(Keq) value: Keq = e^(31.92) ≈ 4.16 x 10^13.
To know more about equilibrium visit :
https://brainly.com/question/30694482
#SPJ11
a piece of metal with a mass of 2185 g absorbs 431 j at 23 0c . its temperature changes to 24 oc. what is the specific heat of the metal?
The specific heat of the metal is 0.196 J/g°C.
To calculate the specific heat of the metal, we can use the formula:
q = m * c * ΔT
Where q is the amount of heat absorbed, m is the mass of the metal, c is the specific heat of the metal, and ΔT is the change in temperature.
In this case, we know that the mass of the metal is 2185 g and the heat absorbed is 431 J. We also know that the initial temperature is 23°C and the final temperature is 24°C.
First, we need to calculate the change in temperature:
ΔT = final temperature - initial temperature
ΔT = 24°C - 23°C
ΔT = 1°C
Now we can plug in the values we know and solve for c:
431 J = 2185 g * c * 1°C
c = 431 J / (2185 g * 1°C)
c = 0.196 J/g°C
Therefore, the specific heat of the metal is 0.196 J/g°C. This means that it takes 0.196 J of energy to raise the temperature of 1 gram of the metal by 1°C.
To know more about specific heat, refer here:
https://brainly.com/question/29766819#
#SPJ11
What is the correct assignment of the names of the following aromatic amines? 1-pyrrolidine; Il = pyrimidine;
The correct name for the aromatic amine "Il = pyrimidine" is simply "pyrimidine."
Pyrimidine is an aromatic heterocyclic compound, which consists of a six-membered ring with two nitrogen atoms at positions 1 and 3.
Pyrimidine is a six-membered heterocyclic ring structure composed of four carbon atoms and two nitrogen atoms.
The nitrogen atoms are located at positions 1 and 3 within the ring. The aromatic nature of pyrimidine arises from the presence of a conjugated π electron system, which contributes to its stability and unique chemical properties.
Pyrimidine is an essential building block in nucleic acids, where it pairs with purines (adenine and guanine) to form the genetic code in DNA and RNA. It plays a critical role in storing and transmitting genetic information and is involved in various biological processes.
To summarize, pyrimidine is an aromatic heterocyclic compound with a six-membered ring containing two nitrogen atoms. It is not an aromatic amine but rather an important component of nucleic acids.
To learn more about compound, refer below:
https://brainly.com/question/13516179
#SPJ11