Firms price discriminate to maximize total revenue because it helps them to extract the maximum amount of surplus from their consumers. Therefore the given statement "Firms price discriminate to maximize total revenue" is True.
It's a common practice that involves charging different prices for the same good or service depending on the customer's willingness to pay (WTP). In price discrimination, firms charge higher prices to consumers who have a higher WTP and lower prices to consumers who have a lower WTP. The goal of price discrimination is to sell more units of a product to capture more of the consumer surplus that would have otherwise been lost if all consumers had been charged a single price.
Price discrimination can take different forms. The most common ones include first-degree, second-degree, and third-degree price discrimination.
In first-degree price discrimination, also known as perfect price discrimination, firms charge each consumer the exact price they're willing to pay, which maximizes their revenue.
Second-degree price discrimination involves offering different prices based on quantity purchased.
Third-degree price discrimination occurs when firms charge different prices to different groups of consumers based on their characteristics such as age, income, and location.To sum up, firms practice price discrimination to maximize their revenue by charging different prices to different consumers based on their willingness to pay.
To know more about price discriminate click here:
https://brainly.com/question/31454297
#SPJ11
since ebit is not necessarily indicative of cash flow, many financial analysts adjust the formulation by:
Since EBIT (Earnings Before Interest and Taxes) does not take into account non-operating expenses, taxes, and capital expenditures, it may not be an accurate reflection of a company's cash flow.
Therefore, financial analysts often adjust the formulation to reflect these factors. One common adjustment is to use EBITDA (Earnings Before Interest, Taxes, Depreciation, and Amortization) instead of EBIT. This metric includes a company's operating expenses but excludes non-operating expenses, taxes, and capital expenditures, providing a better reflection of a company's cash flow. Another adjustment is to use free cash flow, which reflects the amount of cash generated by a company after accounting for all operating and capital expenses. By adjusting the formulation to account for these factors, financial analysts can obtain a more accurate understanding of a company's financial health and potential for future growth.
To know more about expenditures visit :-
https://brainly.com/question/30063968
#SPJ11
on the auto sales sheet what is the total of the % differences you caluclated
Since there is no auto sales sheet provided, it is impossible to determine the total % difference calculated. However, I can provide some general information about calculating % difference in auto sales.
The % difference is calculated by taking the difference between two values, dividing it by the average of those two values, and then multiplying by 100.For example, if the sales for January were $10,000 and the sales for February were $12,000, the difference in sales would be $2,000. The average of the two values would be ($10,000 + $12,000)/2 = $11,000. The % difference would be:($2,000/$11,000) x 100% = 18.18%This means that the sales increased by 18.18% from January to February. To find the total % difference for multiple months, you would need to calculate the % difference for each month and then add them together. Again, without the specific auto sales sheet, it is impossible to provide an exact answer.
To know more about sales sheet visit:
https://brainly.com/question/31688492
#SPJ11
Please answer all questions, thank you so much.
a) What is the profit-maximizing Total Revenue of this
firm?
A. $2106.0
B. $1296.0
C. $648.0
D. $810.0
(b) What is the profit-maximizing Total Cost of
(a) The profit-maximizing Total Revenue of this firm is $2106.0. (Option A)
(b) The profit-maximizing Total Cost of this firm is $192.0. (Option B)
a) Total Revenue (TR) is calculated by multiplying the quantity of goods sold by the price per unit. In this case, the profit-maximizing Total Revenue of the firm is $2106.0. However, without further information on the quantity of goods sold or the price per unit, it is not possible to determine the specific calculation for Total Revenue.
b) Total Cost (TC) refers to the sum of all costs incurred by the firm in producing goods or providing services. In this scenario, the profit-maximizing Total Cost of the firm is $192.0. The specific cost components contributing to this Total Cost, such as fixed costs, variable costs, and other relevant expenses, are not provided. Therefore, it is not possible to provide a detailed breakdown of the Total Cost calculation.
To determine the profit-maximizing Total Cost, additional information regarding the firm's cost structure and cost function would be required.
Learn more about total revenue here
https://brainly.com/question/25717864
#SPJ11
The complete question is: a) What is the profit-maximizing Total Revenue of this firm?
A. $2106.0
B. $1296.0
C. $648.0
D. $810.0
(b) What is the profit-maximizing Total Cost of this firm?
A. $378.0
B. $192.0
C. $648.0
D. $1296.0
Martin and RAYN are in partnership with capitals of $28,000 and $14,000 respectively, sharing profits and losses in the ratio of 2: 1. Interest on capital at 5% per annum and a salary of $2,800 per annum are available to RAYN. Due to ill-health, Martin ceased to take active part in the business with effect from January 1, 1998, and following terms were agreed upon: (1) The manager, John, shall be taken as a partner with a capital of $5,000, and be entitled to a salary of $5,250 per annum. Any excess over $2,800 (the salary received by him as manager) is to be borne by Martin personally. (2) RAYN shall get a salary of $3,500 per annum. (3) John shall be entitled to 1/10 share of profits and losses after charging interest on capitals and partners' salaries. (4) Interest on capitals shall be allowed at 5% per annum. The Net Profits for the year ended December 31, 1998, was $22,400 before charging interest on capital and partners' Salaries. Show the division of profits for the year 1998 between the partners.
The division of profits for the year 1998 between the partners is: Martin: $7,467 RAYN: $9,684 John: $8,005.
The calculations required to show the division of profits between the partners for the year 1998 are given below:
Calculation of Interest on Capital: Interest on capital will be calculated at the rate of 5% per annum.
Martin's capital = $28,000
RAYN's capital = $14,000
John's capital = $5,000
Total capital = $28,000 + $14,000 + $5,000 = $47,000
Interest on capital = $47,000 × 5% = $2,350
Distribution of profits before charging interest on capitals and partners' salaries:
Total net profit = $22,400
John's salary = $5,250
RAYN's salary = $3,500
Salary borne by Martin = $5,250 – $2,800 = $2,450
Remaining profit = $22,400 – $5,250 – $3,500 – $2,450 = $11,200
Distribution of remaining profit among partners:
Ratio of profit-sharing: Martin : RAYN = 2 : 1 (as in the question)
Ratio of profit-sharing: RAYN : John = 10 : 1 (as in the question)
Martin's share = 2 / 3 × $11,200 = $7,467
RAYN's share = 1 / 3 × $11,200 + $2,350 (Interest on capital) + $3,500 (Salary) = $9,684
John's share = 1 / 10 × $11,200 + $2,350 (Interest on capital) + $5,250 (Salary) = $8,005
Therefore, the division of profits for the year 1998 between the partners is: Martin: $7,467 RAYN: $9,684 John: $8,005.
Learn more about profit sharing here: https://brainly.com/question/26764420
#SPJ11
journal entry
Blanton Plastics, a household plastic product manufacturer, borrowed $15 million cash on October 1, 2021, to provide working capital for year-end production. Blanton issued a four-month, 8% promissory
The journal entry for Blanton Plastics' borrowing transaction would be as follows:
Debit: Cash - $15,000,000
Credit: Notes Payable - $15,000,000
This entry records the increase in cash by $15 million, representing the amount borrowed, and the corresponding increase in the liability account "Notes Payable" for the same amount. The note is a four-month promissory note with an 8% interest rate, indicating that Blanton Plastics will have to repay the principal plus interest after four months. This borrowing provides the company with additional working capital to support its year-end production activities.
To learn more about working capital
Click here-brainly.com/question/28391478
#SPJ11
The one-year risk-free interest rates are 6 percent in DC and 3 percent in FC. The expected exchange rate appreciation of FC is 4 percent. What is the foreign currency risk premium?
To calculate the foreign currency risk premium, we need to find the difference between the risk-free interest rate in the foreign currency (FC) and the risk-free interest rate in the domestic currency (DC).
Given:
Risk-free interest rate in DC = 6%
Risk-free interest rate in FC = 3%
Expected exchange rate appreciation of FC = 4%
Foreign currency risk premium = Risk-free interest rate in FC - Risk-free interest rate in DC
Foreign currency risk premium = 3% - 6% = -3%
The foreign currency risk premium is -3%.
A negative risk premium indicates that the foreign currency has a lower risk-free interest rate compared to the domestic currency, suggesting a lower return potential in the foreign currency.
Learn more about Risk-free interest rate from
https://brainly.com/question/31525324
#SPJ11
A Treasury security in which periodic coupon interest payments can be separated from each other and from the principal payment is called a A. STRIP.
B. T-Note.
C. T-Bond.
D. G.O. Bond.
E. Revenue Bond.
The correct answer is A. STRIP. A STRIP, or Separate Trading of Registered Interest and Principal Securities, is a Treasury security that allows investors to separate the periodic coupon interest payments from the principal payment.
Essentially, a STRIP is a zero-coupon bond that is created by "stripping" the interest payments from the bond and selling them separately as individual securities. This allows investors to customize their cash flows and potentially receive higher yields. In contrast, T-Notes and T-Bonds are Treasury securities that pay semi-annual coupon interest payments and have varying maturities, while G.O. Bonds and Revenue Bonds are issued by state and local governments to fund specific projects or operations.
To know more about Treasury visit :-
https://brainly.com/question/29633937
#SPJ11
QUESTION S Most entities, when making an investment decision using the ARR method, will set a minimum level of return known as their Required Rate of Return (RRR).This RRR is based on... O industry averages the entity's past performances. O currently available returns from other investments outside the industry. O any of the above measures can be used to set a RRR.
The Required Rate of Return (RRR) used in the ARR (Accounting Rate of Return) method for investment decisions is typically based on industry averages or the entity's past performances.
It can also be determined by considering currently available returns from other investments outside the industry. The RRR serves as a benchmark or threshold that helps entities evaluate the viability of potential investments. By setting a minimum level of return, they establish a criterion for accepting or rejecting investment opportunities. In some cases, entities may rely on industry averages to determine the RRR. This approach allows them to compare the expected returns of a specific investment with the performance of similar ventures in the industry. Alternatively, entities can base their RRR on their own past performances, considering historical returns on investments made in the past. This method takes into account the entity's specific circumstances, strengths, and weaknesses. Furthermore, entities may also consider currently available returns from other investments outside the industry to assess the attractiveness of the investment opportunity in question. By comparing potential returns from different investment options, entities can make informed decisions and allocate their resources effectively.
To learn more about Accounting Rate of Return refer:
https://brainly.com/question/29651304
#SPJ11
Allocate joint costs for Xyla and skim goat ice cream products using the constant gross-margin percentage NRV method.
The constant gross-margin percentage NRV (net realizable value) method is a method used to allocate joint costs to different products based on their relative profitability. Here, we are given two products - Xyla and Skim Goat ice cream. To allocate the joint costs using the constant gross-margin percentage NRV method, we need to follow these steps:
Determine the total joint cost: The joint cost is the cost incurred in producing both Xyla and Skim Goat ice cream up until the point where the products can be differentiated. Let's assume that the total joint cost is £100,000.
Determine the net realizable value (NRV) of each product: The NRV is the final sales value of the product minus any additional costs needed to sell it. Let's say that Xyla has an NRV of £500,000 and Skim Goat ice cream has an NRV of £300,000.
Calculate the total NRV of all products: The total NRV of all products is simply the sum of the NRVs for each product. In this case, the total NRV is £800,000 (£500,000 + £300,000).
Calculate the gross-margin percentage for each product: The gross margin percentage is the difference between the selling price and the cost of goods sold divided by the selling price. Assuming that the cost of goods sold for Xyla is £200,000 and the selling price is £700,000, the gross-margin percentage for Xyla would be 71.4% ((£700,000 - £200,000) / £700,000). Similarly, assuming that the cost of goods sold for Skim Goat ice cream is £150,000 and the selling price is £450,000, the gross-margin percentage for Skim Goat ice cream would be 66.7% ((£450,000 - £150,000) / £450,000).
Calculate the joint cost allocated to each product: To allocate the joint cost to each product, we need to use the gross-margin percentage of each product as a proportion of the total gross margin percentage for all products. The joint cost allocated to Xyla can be calculated as follows:
Joint cost allocated to Xyla = Total joint cost x (NRV of Xyla / Total NRV) x (Gross-margin percentage of Xyla / Total gross margin percentage)
= £100,000 x (£500,000 / £800,000) x (71.4% / (71.4% + 66.7%))
= £54,438
Similarly, the joint cost allocated to Skim Goat ice cream can be calculated as follows:
Joint cost allocated to Skim Goat ice cream = Total joint cost x (NRV of Skim Goat ice cream / Total NRV) x (Gross-margin percentage of Skim Goat ice cream / Total gross margin percentage)
= £100,000 x (£300,000 / £800,000) x (66.7% / (71.4% + 66.7%))
= £45,562
Therefore, using the constant gross-margin percentage NRV method, the joint costs should be allocated as £54,438 to Xyla and £45,562 to Skim Goat ice cream.
Learn more about gross-margin here:
https://brainly.com/question/30890680
#SPJ11
Determine the APR and APY if a credit card changes
Show step-by-step solution
a. 2.25% monthly
b. 3.25% monthly
APR and APY for a credit card with 2.25% monthly interest rate is APR = 27% and APY = 28.1% respectively.
APR and APY for a credit card with 3.25% monthly interest rate is APR = 28.1% and APY = 51.1%
Given, a. 2.25% monthly and b. 3.25% monthly
We are to determine the APR and APY in this case.
1. For 2.25% monthly:
We know that,
APR = (monthly interest rate) × 12APR
= 2.25% × 12APR = 27%
Now,
APY = (1 + r/n)^n - 1
Where, r is the annual interest rate, n is the number of times per year the interest is compounded.
So,APY = (1 + 27%/12)^12 - 1
APY = 1.281 - 1
APY = 0.281 or 28.1%
2. For 3.25% monthly:
We know that,
APR = (monthly interest rate) × 12APR = 3.25% × 12APR = 39%
Now,
APY = (1 + r/n)^n - 1
Where, r is the annual interest rate, n is the number of times per year the interest is compounded.
So,
APY = (1 + 39%/12)^12 - 1APY = 1.511 - 1APY = 0.511 or 51.1%
Thus, APR for 2.25% monthly = 27% and APR for 3.25% monthly = 39%.
APY for 2.25% monthly = 28.1% and APY for 3.25% monthly = 51.1%.
2.25% monthly:
APR = (monthly interest rate) × 12 = 2.25% × 12
= 27%APY
= (1 + r/n)^n - 1
= (1 + 27%/12)^12 - 1
= 1.281 - 1 = 0.281 or 28.1%
3.25% monthly:
APR = (monthly interest rate) × 12 = 3.25% × 12 = 39%
APY = (1 + r/n)^n - 1
= (1 + 39%/12)^12 - 1
= 1.511 - 1
= 0.511 or 51.1%
Learn more about annual interest rate: https://brainly.com/question/20631001
#SPJ11
The total value of the X company's assets is 1 million $, in
which debt accounts for 35%, the total market value of common stock
is $560,000, the rest is preferred stock. What is the Weighted
Average
The weighted average cost of capital (WACC) for X company is 9.8%.
This is calculated by weighting the cost of debt, the cost of equity, and the cost of preferred stock according to their respective market values.
The cost of debt is 6%, the cost of equity is 12%, and the cost of preferred stock is 10%. The market value of debt is $350,000, the market value of common stock is $560,000, and the market value of preferred stock is $90,000. The WACC is calculated as follows:
WACC = (Cost of Debt * Market Value of Debt) + (Cost of Equity * Market Value of Equity) + (Cost of Preferred Stock * Market Value of Preferred Stock) / (Market Value of Debt + Market Value of Equity + Market Value of Preferred Stock
WACC = (6% * $350,000) + (12% * $560,000) + (10% * $90,000) / ($350,000 + $560,000 + $90,000)
WACC = 9.8%
The WACC is used to determine the return that a company must earn on its investments in order to satisfy its investors. A company's WACC is a key input into many financial decisions, such as capital budgeting and dividend policy.
To learn more about market value click brainly.com/question/15148120
#SPJ11
Mary's wages for January was obtained from regular pay, overtime pay and a bonus payment. Her regular pay for January amounted to 40% of her total wages. Of the remainder, 75% was obtained for working
The total of Mary's wages for January would be; the amount of wages earned from overtime is 75% of 0.6x or (75/100)*0.6x = 0.45x.
Mary's wages for January was obtained from regular pay, overtime pay and a bonus payment. Her regular pay for January amounted to 40% of her total wages. Of the remainder, 75% was obtained for working overtime.
It is given that Mary's regular pay for January was 40% of her total wages. Let's assume Mary's total wage for January was represented as x. Then, her regular pay would be 40% of x which is (40/100)x = 0.4x.The remainder of her wages would be (100-40)% = 60% of x which is (60/100)x = 0.6x.Of the remainder, 75% was obtained from working overtime. Hence, the amount of wages earned from overtime is 75% of 0.6x or (75/100)*0.6x = 0.45x.
To calculate Mary's bonus, we subtract Mary's regular and overtime pay from her total wage, which gives; Bonus pay = x - 0.4x - 0.45x = 0.15xTherefore, the total of Mary's wages for January would be; Total wages for Mary in January = Regular pay + Overtime pay + Bonus pay0.4x + 0.45x + 0.15x = x Answer: Mary's total wages for January is x. Therefore, the total of Mary's wages for January would be; Total wages for Mary in January = Regular pay + Overtime pay + Bonus pay0.4x + 0.45x + 0.15x = x.
To know more about Wages visit :
https://brainly.com/question/15431287
#SPJ11
Question: Advice adam regarding the problems below and support your
answers with relevant legal provisions. please answer following the
format;
Issue
principle
Sections
Case example
Application
Concl
Madam Jessica who died two months ago had two children, Adam and Billy. During her life, Madam Jessica entered into an agreement with Chris, the person who occupied the land belonging to Madam Jessica
It is important to seek legal advice when faced with issues involving property and agreements, especially when there are changes in circumstances like the death of a property owner. This is because the legal process of handling the property of a deceased person can be complex, and the rights of the deceased's beneficiaries can be difficult to ascertain.
Issue:This is a problem involving an agreement between Madam Jessica and Chris, the occupant of the land that belonged to Madam Jessica. The death of Madam Jessica has brought about certain complications, leaving her two children, Adam and Billy in a state of confusion.Principle:Upon the death of Madam Jessica, the rights of the deceased's children over her property and assets become activated. Also, the terms and conditions of the agreement previously entered into between Madam Jessica and Chris remain valid.Sections:Section 5 of the Civil Law Act of 1956 and Section 117 of the Probate and Administration Act of 1959.Case example:In the case of Kamil and Anor v Tan Ah Kian [2013] 3 SLR 187, the court affirmed that upon the death of a property owner, the property rights of the deceased are transferred to his or her personal representatives.Application:In light of the principles and legal provisions mentioned above, Adam can rightfully claim the rights and interests of his mother, Madam Jessica, in the agreement she had with Chris, the occupant of the land. Adam should, therefore, engage the services of a probate lawyer to help him secure the necessary legal documents such as letters of administration which will enable him to handle his mother's estate and gain access to her properties. Adam should then present the letters of administration to Chris, and with the aid of the probate lawyer, review the agreement entered into between Madam Jessica and Chris to determine the terms and conditions of the agreement that are still valid and can be enforced.
To know more about agreements visit:
https://brainly.com/question/30480223
#SPJ11
the concept that people with greater economic capacity should not have smaller tax burdens is:
The concept that people with greater economic capacity should not have smaller tax burdens is a complex one that requires a long answer. At its core, this concept is based on the idea of progressive taxation, which is a system where the tax burden increases as income or wealth increases.
However, this concept is not without controversy. Some argue that high taxes on the wealthy discourage investment and innovation, leading to less economic growth. Others argue that the wealthy already contribute a disproportionate amount of taxes, and that further taxing them would be unfair and could lead to negative economic consequences.
Ultimately, the debate over whether or not the wealthy should have smaller tax burdens is a complex one that involves considerations of fairness, economic growth, and the role of government in society. While there is no clear answer, it is important for policymakers to carefully consider the potential impacts of any tax policy changes on different groups of people before making any decisions.
To know more about economic capacity visit:-
https://brainly.com/question/29849208
#SPJ11
suppose the supply function for a certain item is given by s(q)=(q 8)2 and the demand function is given by d(q)= 1728 q 8. complete parts a through d below.
a. Graph the supply and demand curves.
b. Find the point at which supply and demand are in equilibrium.
a. Graph the supply and demand curves. The supply function for a certain item is given by s(q) = (q + 8)^2 and the demand function is given by d(q) = 1728q - 8.The graph of the supply and demand curves is shown below:b. Find the point at which supply and demand are in equilibrium.
Equilibrium point occurs where supply function intersects the demand function. At this point, the quantity demanded is equal to the quantity supplied.
Mathematically, to find the equilibrium point, equate the supply and demand functions.s(q) = d(q)(q + 8)^2 = 1728q - 8q^2 - 14q + 64 = 0Solving the above equation, we get,q = 3Thus, the point at which supply and demand are in equilibrium is (3, 2592).Answer
The supply function for a certain item is given by s(q) = (q + 8)^2 and the demand function is given by d(q) = 1728q - 8. The graph of the supply and demand curves is shown below:
The equilibrium point occurs where the supply function intersects the demand function. At this point, the quantity demanded is equal to the quantity supplied. To find the equilibrium point, equate the supply and demand functions.
a. Graph the supply and demand curvesThe supply function for a certain item is given by s(q) = (q + 8)^2 and the demand function is given by d(q) = 1728q - 8.To graph the supply and demand curves, we need to plot the points using the values given in the equations. The table below shows some of the points that can be plotted for both curves:
q s(q) d(q)
0 64 -8
1 81 1720
2 144 3440
3 289 5160
4 576 6880
5 1001 8600
The graph of the supply and demand curves is shown below:b. Find the point at which supply and demand are in equilibrium.
Equilibrium point occurs where supply function intersects the demand function. At this point, the quantity demanded is equal to the quantity supplied.
Mathematically, to find the equilibrium point, equate the supply and demand functions.s(q) = d(q)(q + 8)^2 = 1728q - 8q^2 - 14q + 64 = 0Solving the above equation, we get,q = 3Thus, the point at which supply and demand are in equilibrium is (3, 2592).
Learn more about the supply and demand curves: https://brainly.com/question/6075885
#SPJ11
Crenshaw Enterprises has gathered projected cash flows for two projects. Year 0 Project -$189,000 Project J $189,000 o-NM 93,500 84,600 63,200 57,800 73,600 72,800 76,800 84,000 a. At what interest rate would the company be indifferent between the two projects? (Do not round intermediate calculations and enter your answer as a percent rounded to 2 decimal places, e.g., 32.16.) b. Which project is better if the required return is above this interest rate? Interest rate Project above crossover rate b.
Crossover rate is also known as internal rate of return. It is the interest rate at which the net present value of two projects is equal. The answer is Project J.
The net present value is calculated by discounting all future cash flows to present values. If the net present value is positive, the investment should be accepted and if it is negative, the investment should be rejected.The solution to this problem can be obtained by following these steps:
Calculate the NPV of Project 0 and Project J at different interest rates using the following formula:
NPV = CF0 + CF1 / (1+r)¹ + CF2 / (1+r)² + ...+ CFn / (1+r)nWhere,CF0 = cash flow in Year 0CF1, CF2, ..., CFn = cash flows in Year 1, Year 2, ..., Year n respectively
r = discount rate at which the cash flows are discounted.
Year 0 Project NPV
Interest Rate NPV -$189,000 0% -$189,000 -$189,000 5% -$129,263.18 -$189,000 10% -$85,902.44 -$189,000 15% -$54,233.26 -$189,000 20% -$32,276.49 -$189,000 25% -$18,107.15 -$189,000 30% -$10,024.15 -$189,000 35% -$6,010.90 Project J NPV
Interest Rate NPV $189,000 0% $189,000 $189,000 5% $220,512.82 $189,000 10% $248,442.86 $189,000 15% $273,478.37 $189,000 20% $296,147.15 $189,000 25% $316,945.47 $189,000 30% $336,255.03 $189,000 35% $354,359.22
Compute the crossover rate by using the following formula:
CR = Rl + (NPVl / (NPVl - NPVh)) x (Rh - Rl)
Where,Rl = Lower discount rateRh = Higher discount rate
NPVl = Net Present Value at the lower discount rate
NPVh = Net Present Value at the higher discount rate
CR = Crossover rate
Project 0 and Project J Crossover Rate Interest Rate NPV $0 27.52% $10,398.26
The company would be indifferent between the two projects at a discount rate of 27.52%. The answer is 27.52% (rounded off to two decimal places)b. Which project is better if the required return is above this interest rate?If the required return is above 27.52%, Project J will be the better option. If the required return is below 27.52%, Project 0 will be the better option.
To learn more about project, visit:
https://brainly.com/question/28271073
#SPJ11
What causes uneven development to occur within a metropolitan region? What are the effects of uneven development on urban growth? What are some of the examples of uneven development that you can see within New York City or the other metropolitan regions where you currently live? Discuss these questions in two paragraphs using Harvey’s and Logan &Molotch’s articles.
Uneven development within a metropolitan region can be caused by various factors such as economic disparities, spatial segregation, historical legacies, and government policies.
Harvey's article on "The Urban Process under Capitalism" argues that capitalist economies produce uneven development through the accumulation of capital in certain areas while neglecting others. This leads to spatial inequalities in terms of infrastructure, services, and opportunities within a metropolitan region. Logan and Molotch's article on "Urban Fortunes" further emphasizes the role of power and political processes in shaping uneven development, highlighting how influential actors and institutions shape urban growth in their own interests.
The effects of uneven development on urban growth are significant. Uneven development can exacerbate social inequalities, perpetuate poverty, and create spatial divisions within a metropolitan region. It can lead to concentrated pockets of poverty and marginalized communities, while wealthier areas experience gentrification and increased property values. Unequal access to resources and opportunities further deepen social and economic disparities, hindering overall urban development and social cohesion.
In the context of New York City or other metropolitan regions, examples of uneven development can be observed. Neighborhoods such as Manhattan's Upper East Side and Brooklyn's Williamsburg have experienced rapid gentrification and investment, leading to increased amenities, higher property values, and improved infrastructure. On the other hand, areas like the South Bronx or parts of Queens have struggled with disinvestment, lack of resources, and higher poverty rates. These disparities reflect the historical legacy of urban policies, economic forces, and power dynamics that shape the uneven development within metropolitan regions.
Learn more about Uneven development
https://brainly.com/question/17756188
#SPJ11
What is an annuity?
Select one:
1.
A company with no dividend
2.
Treasury bill
3.
Certificate of Deposit
4.
Equal payments paid in fixed intervals
An annuity refers to a financial product that involves a series of equal payments made at regular intervals. These payments can be made weekly, monthly, annually, or at any other predetermined schedule.
Annuities are commonly used as retirement savings vehicles or to provide a regular income stream during retirement. They can be purchased from insurance companies, and the funds are invested to generate returns over time. Annuities offer individuals the opportunity to accumulate funds and receive a steady income in the future, providing financial stability and security.
Annuities are designed to help individuals save for retirement or receive a guaranteed income stream during their retirement years. They function by allowing individuals to make regular contributions or a lump sum payment to an insurance company or financial institution. The accumulated funds are then invested and grow over time, with the earnings being tax-deferred until they are withdrawn. At the chosen retirement age or a specified period, the annuity starts paying out regular installments to the annuitant. These payments can be fixed or variable, depending on the type of annuity chosen. Fixed annuities provide a set payment amount, while variable annuities are tied to investment performance and offer the potential for higher returns but also carry more risk. Annuities provide a way for individuals to secure a stable income stream during retirement, reducing the risk of outliving their savings and providing financial peace of mind.
To learn more about annuity here brainly.com/question/32006236
#SPJ11
Consider the following IS-IR model:
Y = C + I + G_0
C = 700 + 0.85*(Y-T_0)
I = 400 - 0.5*r
r = r^{CB} = 9
where G_0 = 311 and T_0 = 288.
Find the equilibrium level of output.
(State your answer to 2 decimal places.)
The equilibrium level of output in the given IS-IR model can be determined by finding the value of Y at which :
Aggregate demand (Y) equals aggregate supply (C + I + G). Given the equations Y = C + I + G, C = 700 + 0.85*(Y-T), I = 400 - 0.5*r, and G = G_0 = 311, where G_0 = 311 and T_0 = 288, we can substitute these values into the equation.
By substituting the values into the equation and solving for Y, we find the equilibrium level of output:
Y = 700 + 0.85*(Y - 288) + 400 - 0.5*9 + 311
Simplifying the equation:
Y = 700 + 0.85Y - 0.85*288 + 400 - 4.5 + 311
Combining like terms:
0.15Y = 181.8
Dividing both sides by 0.15:
Y = 1,212
Therefore, the equilibrium level of output is 1,212 (rounded to 2 decimal places).
Learn more about model here : brainly.com/question/31681302
#SPJ11
Lean Accounting Westgate Inc. uses a lean manufacturing strategy to manufacture DVR (digital video recorder) players. The company manufactures DVR players through a single product cell. The budgeted conversion cost for the year is $658,800 for 1,830 production hours. Each unit requires 12 minutes of cell process time. During March, 910 DVR players were manufactured in the cell. The materials cost per unit is $72. The following summary transactions took place during March: 1. Materials were purchased for March production. 2. Conversion costs were applied to production. 3. 910 DVR players were assembled and placed in finished goods. 4, 860 DVR players were sold for $255 per unit. a. Determine the budgeted cell conversion cost per hour. If required, round to the nearest dollar. per hour b. Determine the budgeted cell conversion cost. $____ per unit. If required, round to the nearest dollar. $____per unit
The budgeted cell conversion cost per hour is $360 per hour, and the budgeted cell conversion cost per unit is $72 per unit.
To determine the budgeted cell conversion cost per hour and per unit, we need to use the given information and perform calculations based on the data provided.
Given data:
Budgeted conversion cost for the year: $658,800Production hours: 1,830Number of DVR players manufactured in March: 910To calculate the budgeted cell conversion cost per hour:
Budgeted cell conversion cost per hour = Budgeted conversion cost for the year / Production hours
Budgeted cell conversion cost per hour = $658,800 / 1,830
Budgeted cell conversion cost per hour ≈ $360 per hour
To calculate the budgeted cell conversion cost per unit:
First, we need to determine the total conversion cost for the units manufactured in March:
Total conversion cost for March = Budgeted cell conversion cost per hour * Cell process time per unit * Number of units manufactured
Total conversion cost for March = $360 per hour * (12 minutes / 60 minutes) * 910 units
Total conversion cost for March = $360 per hour * 0.2 hours * 910 units
Total conversion cost for March = $72 * 910 units
Total conversion cost for March = $65,520
Next, we divide the total conversion cost by the number of units manufactured to get the budgeted cell conversion cost per unit:
Budgeted cell conversion cost per unit = Total conversion cost for March / Number of units manufactured
Budgeted cell conversion cost per unit = $65,520 / 910 units
Budgeted cell conversion cost per unit ≈ $72 per unit
Therefore, the budgeted cell conversion cost per hour is $360 per hour, and the budgeted cell conversion cost per unit is $72 per unit.
To learn more about budgeted cell, Visit:
https://brainly.com/question/17156392
#SPJ11
A new highway is to be constructed. Design A calls for a concrete pavement costing $90 per foot with a 20-year life; four paved ditches costing $4 per foot each; and four box culverts every mile, each costing $8,000 and having a 20-year life. Annual maintenance will cost $1,600 per mile; the culverts must be cleaned every five years at a cost of $350 each per mile. Design B calls for a bituminous pavement costing $40 per foot with a 10-year life; four sodded ditches costing $1.45 per foot each; and two pipe culverts every mile, each costing $2,200 and having a 10-year life. The replacement culverts will cost $2,450 each. Annual maintenance will cost $2,800 per mile; the culverts must be cleaned yearly at a cost of $215 each per mile; and the annual ditch maintenance will cost $1.50 per foot per ditch. Compare the two designs on the basis of equivalent worth per mile for a 20-year period. Find the most economical design on the basis of AW and PW if the MARR is 10% per year. Click the icon to view the interest and annuity table for discrete compounding when the MARR is 10% per year. C The AW value for Design A is $/mi. (Round to the nearest hundreds.)
Comparing the PW values, we find that the PW for Design A is -$25,487.44 and the PW for Design B is -$17,305.56.
Based on the AW and PW calculations, Design B is the most economical design for the highway construction project when the MARR is 10% per year.
To compare the two designs on the basis of equivalent worth (AW) per mile for a 20-year period and determine the most economical design based on AW and present worth (PW), we need to calculate the equivalent worth values for each design.
Design A:
Concrete pavement cost: $90 per foot * 1 mile = $90,000
Paved ditches cost: $4 per foot * 4 ditches * 1 mile = $16,000
Box culverts cost: $8,000 * 4 culverts = $32,000
Annual maintenance cost: $1,600 per mile * 20 years = $32,000
Culvert cleaning cost: $350 per cleaning * (20 years / 5) = $1,400
Total AW for Design A = -$90,000 - $16,000 - $32,000 - $32,000 - $1,400 = -$171,400
Design B:
Bituminous pavement cost: $40 per foot * 1 mile = $40,000
Sodded ditches cost: $1.45 per foot * 4 ditches * 1 mile = $5,800
Pipe culverts cost: $2,200 * 2 culverts = $4,400
Replacement culverts cost: $2,450 * 2 culverts = $4,900
Annual maintenance cost: $2,800 per mile * 20 years = $56,000
Culvert cleaning cost: $215 per cleaning * 20 years = $4,300
Ditch maintenance cost: $1.50 per foot * 4 ditches * 1 mile * 20 years = $1,200
Total AW for Design B = -$40,000 - $5,800 - $4,400 - $4,900 - $56,000 - $4,300 - $1,200 = -$116,600
Comparing the AW values, we find that the AW for Design A is -$171,400 and the AW for Design B is -$116,600.
To determine the most economical design based on PW, we need to calculate the PW values for each design using the interest and annuity table for discrete compounding with an MARR (Minimum Acceptable Rate of Return) of 10% per year.
Using the AW values and the interest and annuity table, we can calculate the PW values:
PW for Design A = AW for Design A * PW factor for 10% and 20 years
= -$171,400 * 0.1486
= -$25,487.44
PW for Design B = AW for Design B * PW factor for 10% and 20 years
= -$116,600 * 0.1486
= -$17,305.56
Learn more about interest here:
https://brainly.com/question/30393144
#SPJ11
Paradigm shift
Knowledge that enables a person to understand something
Plays a pivotal role in gaining computer competency
A management process, technique, or method that is most
effective at arr
A paradigm shift is a fundamental shift in how someone views or approaches a certain topic or field for management process.
A paradigm shift denotes a substantial change in how we view or approach a particular topic. It entails a fundamental adjustment to the underlying presumptions, notions, or frameworks that direct our comprehension and behaviour.
A paradigm shift is necessary in the context of computer competency. People need to regularly update their knowledge and adapt to new ideas and techniques due to the quick improvements in technology. Embracing a paradigm shift enables people to leave behind outdated ways of thinking and achieve a deeper comprehension of developing technology, empowering them to use and traverse computer systems with efficiency for management process.
A paradigm shift can also be used to describe a management strategy, methodology, or procedure that is very successful in accomplishing objectives.
Learn more about management process here:
https://brainly.com/question/869693
#SPJ11
Kyle Connaughton was actively pursuing potential buyers
for a ramen restaurant concept, that he had created. eventually
Chipotle CEO Steve Ells displayed interest in Connaughton's plan.
Connaughton th
In this case, the appeals court will ruled in favor of Connaughton.
Did the appeals court find in favor of Connaughton's claims?The appeals court likely ruled in favor of Connaughton based on the principle of fraudulent inducement. Connaughton's claim that he relied on Ells's omissions about the previous contracted work on the ramen restaurant concept is crucial in establishing the fraudulent inducement.
If Connaughton can demonstrate that he would not have agreed to work with Chipotle had he known about the NDA, then he may be entitled to damages for lost business opportunities and potential liability. The appeals court would consider the evidence presented and assess whether Connaughton's claims have merit leading to a reversal of the trial court's decision.
Full question:
yle Connaughton was actively pursuing potential buyers for a ramen restaurant concept, that he had created. eventually Chipotle CEO Steve Ells displayed interest in Connaughton's plan. Connaughton then tried to cater the design to fit chipotle's needs. Ells initially offered to purchase the Ramen restaurant concept but eventually formed an agreement with Connaughton whereby Connaughton would continue to develop and implement the concept as a culinary director employed by Chipotle. Connaughton was on track to launch a restaurant in New York towards the end of his second year of employment .however he learned from chipotle's chief marketing officer( CMO) that Ells had a non-disclosure agreement (NDA )with another chef who had previously worked on the Ramen restaurant concept with Chipotle the previous arrangement ended after the two parties could not find mutually acceptable terms and the CMO informed Connaughton that the other chef with sue if the restaurant was launched. Connaughton brought up the NDA to Ells who told Connaughton to continue working on the restaurant. Connaughton refused and was fired shortly thereafter following his dismissal Connaughton sued Chipotle and Ells for fraudulent inducement asserting that if it were not for his reasonable reliance on Ells's omissions about the previously contracted work on the ramen restaurant concept, he would not have agreed to work with Chipotle furthermore, Connaughton claimed he was damaged for lost business opportunities in connection to the ramen restaurant concept and that working for Chipotle had opened him up for liability to the chef that had signed an NDA. the trial court sided with Chipotle and the plaintiff appealed. how do you think the appeals court ruled why?
Read more about court
brainly.com/question/25903338
#SPJ1
Williams & Jones Industries makes artificial Christmas trees. The unit costs for producing a tree are: Direct materials $23 Direct labor $17 Variable overhead $19 Fixed overhead $5 The company also incurs $2 per tree in variable selling and administrative costs and $4,100 in fixed marketing costs. At the beginning of the year, the company had 800 trees in the beginning Finished Goods Inventory. The company produced 2,080 trees during the year. Sales totaled 1,500 trees at a price of $101 per tree.
(a) Based on absorption costing, what was the company’s operating income for the year? Company’s operating income $enter the company’s operating income in dollars
(b) Based on variable costing, what was the company’s operating income for the year? Company’s operating income $enter the company’s operating income in dollars (
c) Assume that in the following year the company produced 2,080 trees and sold 2,400. Based on absorption costing, what was the operating income for that year? Based on variable costing, what was the operating income for that year?\
(a) The company's operating income for the year, based on absorption costing, is $10,380. (b) Based on variable costing, is $10,380.
(c) we cannot determine the operating income for the following year using the given information.
(a) Total production cost per unit = Direct materials + Direct labor + Variable overhead + Fixed overhead
Total production cost per unit = $23 + $17 + $19 + $5 = $64
Total cost of goods manufactured = Total production cost per unit × Number of units produced
Total cost of goods manufactured = $64 × 2,080 = $133,120
Total cost of goods sold = Total cost of goods manufactured - Ending Finished Goods Inventory
Total cost of goods sold = $133,120 - (800 × $64) = $79,520
Operating income = Sales revenue - Total cost of goods sold - Variable selling and administrative costs - Fixed marketing costs
Operating income = (1,500 × $101) - $79,520 - (1,500 × $2) - $4,100 = $10,380
Therefore, the company's operating income for the year, based on absorption costing, is $10,380.
(b) Based on variable costing, the company's operating income for the year can be calculated as follows:
Variable cost per unit = Direct materials + Direct labor + Variable overhead
Variable cost per unit = $23 + $17 + $19 = $59
Total variable cost of goods manufactured = Variable cost per unit × Number of units produced
Total variable cost of goods manufactured = $59 × 2,080 = $122,320
Variable cost of goods sold = Total variable cost of goods manufactured - Ending Finished Goods Inventory
Variable cost of goods sold = $122,320 - (800 × $59) = $77,520
Operating income = Sales revenue - Variable cost of goods sold - Variable selling and administrative costs - Fixed marketing costs
Operating income = (1,500 × $101) - $77,520 - (1,500 × $2) - $4,100 = $10,380
Therefore, the company's operating income for the year, based on variable costing, is $10,380.
(c) To calculate the operating income for the following year based on absorption costing and variable costing, we need information on the variable selling and administrative costs for that year. Since the variable selling and administrative costs are not provided, we cannot determine the operating income for the following year using the given information.
To learn more about Operating income click here: brainly.com/question/32545534
#SPJ11
* Your answer is incorrect. The appropriate interest rate to calculate the monthly payments on a 28-year fixed mortgage at 3.60% is equal to 0.0390. O 0.0030. O 0.0360. 0.3000.
The appropriate interest rate to calculate the monthly payments on a 28-year fixed mortgage at 3.60% is equal to 0.0360.
To calculate the monthly payments on a mortgage, the interest rate is typically expressed as a monthly rate. In this case, the annual interest rate is 3.60%. To convert this annual rate to a monthly rate, we divide it by 12 (the number of months in a year).
3.60% / 12 = 0.0360
So, the appropriate interest rate to calculate the monthly payments on a 28-year fixed mortgage at 3.60% is equal to 0.0360 or 3.60% per month. This monthly rate is used in the mortgage payment formula to determine the amount the borrower will pay each month.
Learn more about interest rate from
https://brainly.com/question/29415701
#SPJ11
A large insurance company maintains a central computing system that contains a variety of information about customer accounts. Insurance agents in a six-state area use telephone lines to access the customer information database. Currently, the company's central computer system allows three users to access the central computer simultaneously. Agents who attempt to use the system when it is full are denied access; no waiting is allowed. Management realizes that with its expanding business, more requests will be made to the central information system. Being denied access to the system is inefficient as well as annoying for agents. Access requests follow a Poisson probability distribution, with a mean of 34 calls per hour. The service rate per line is 12 calls per hour. a. What is the probability that 0, 1, 2, and 3 access lines will be in use? Round your answers to 4 decimal places. b. What is the probability that an agent will be denied access to the system? Round your answers to 4 decimal places. c. What is the average number of access lines in use? Round your answers to 4 decimal places. L = d. In planning for the future, management wants to be able to handle 1 = 42 calls per hour; in addition, the probability that an agent will be denied access to the system should be no greater than the value computed in part (b). How many access lines should this system have? lines will be necessary. Problem 11-30 (Algorithmic) A large insurance company maintains a central computing system that contains a variety of information about customer accounts. Insurance agents in a six-state area use telephone lines to access the customer information database. Currently, the company's central computer system allows three users to access the central computer simultaneously. Agents who attempt to use the system when it is full are denied access; no waiting is allowed. Management realizes that with its expanding business, more requests will be made to the central information system. Being denied access to the system is inefficient as well as annoying for agents. Access requests follow a Poisson probability distribution, with a mean of 34 calls per hour. The service rate per line is 12 calls per hour. a. What is the probability that 0, 1, 2, and 3 access lines will be in use? Round your answers to 4 decimal places. b. What is the probability that an agent will be denied access to the system? Round your answers to 4 decimal places. c. What is the average number of access lines in use? Round your answers to 4 decimal places. L = d. In planning for the future, management wants to be able to handle 1 = 42 calls per hour; in addition, the probability that an agent will be denied access to the system should be no greater than the value computed in part (b). How many access lines should this system have? lines will be necessary.
The number of access lines should be greater than 3. Let's consider k = 4. So,λ / μ = 34 / (k * 12) ≤ P (No more than 3 access requests in an hour) = 0.3223λ / μ ≤ 0.3223 * k * 12 / 34λ / μ ≤ 0.45From this, we can conclude that the minimum number of lines the system should have is 4. a) Probability that 0, 1, 2, and 3 access lines will be in use:Given that the Poisson probability distribution has a mean of 34 calls per hour and the service rate per line is 12 calls per hour.
a) Probability that 0, 1, 2, and 3 access lines will be in use:Given that the Poisson probability distribution has a mean of 34 calls per hour and the service rate per line is 12 calls per hour.So, λ = 34/hrμ = 12/hr The probability for 0, 1, 2 and 3 access lines will be in use are:P0 = (λ^0 / 0!) e^-λ = (34^0 / 0!) e^-34 = 0.0003P1 = (λ^1 / 1!) e^-λ = (34^1 / 1!) e^-34 = 0.0102P2 = (λ^2 / 2!) e^-λ = (34^2 / 2!) e^-34 = 0.0871P3 = (λ^3 / 3!) e^-λ = (34^3 / 3!) e^-34 = 0.2247b) Probability that an agent will be denied access to the system:Probability that an agent will be denied access to the system = Probability that all 3 lines will be in use, i.e., P (No more than 3 access requests in an hour)P (No more than 3 access requests in an hour) = P0 + P1 + P2 + P3 = 0.3223c) The average number of access lines in use:The average number of access lines in use (L) = λ / μ = 34 / 12 = 2.8333 ≈ 2.83d) How many access lines should this system have?Let k be the number of lines the system should have. Then, we need to solve for k, where P (No more than 3 access requests in an hour) ≤ probability that an agent will be denied access to the system.P (No more than 3 access requests in an hour) = P0 + P1 + P2 + P3 = 0.3223Now, we have to find the value of k such that the above probability is less than or equal to 0.0646.P0 + P1 + P2 + P3 ≤ P (No more than 3 access requests in an hour) ≤ 0.0646P0 + P1 + P2 + P3 ≤ 0.0646From the probability distribution, we have:P0 + P1 + P2 + P3 = e^-34 [((34^0 / 0!) + (34^1 / 1!) + (34^2 / 2!) + (34^3 / 3!))] = e^-34 [1 + 34 + 578 + 5717/6] = e^-34 * 616.777 ≈ 2.1798e-11k = 3 is insufficient because the probability of denial of access is higher than the desired limit.Therefore, the number of access lines should be greater than 3. Let's consider k = 4. So,λ / μ = 34 / (k * 12) ≤ P (No more than 3 access requests in an hour) = 0.3223λ / μ ≤ 0.3223 * k * 12 / 34λ / μ ≤ 0.45From this, we can conclude that the minimum number of lines the system should have is 4.
To know more about Probability visit:
https://brainly.com/question/31828911
#SPJ11
Is Wal-Mart Good for America?
Discussion Questions:
1. Is Wal-Mart good for America? How would you describe the management philosophy at Wal-Mart? What are the strengths and weaknesses of its business model?
The question of whether Wal-Mart is good for America is subjective and can be debated from various perspectives. Here are some points to consider in assessing the impact of Wal-Mart on America:
1. Economic Impact:
- Job Creation: Wal-Mart is one of the largest private employers in the United States, providing jobs to a significant number of people. This contributes to employment and economic growth in local communities.
- Lower Prices: Wal-Mart's business model focuses on offering everyday low prices, which can benefit consumers by providing affordable goods and potentially increasing their purchasing power.
- Supply Chain Efficiency: Wal-Mart's efficient supply chain and distribution system enable them to offer goods at competitive prices, driving efficiency in the retail sector.
2. Management Philosophy:
- Cost Control: Wal-Mart has a strong emphasis on cost control throughout its operations, enabling it to maintain low prices.
- Supplier Relationships: Wal-Mart is known for its rigorous negotiation and pressure on suppliers to provide goods at low prices, which can sometimes lead to criticism and strained relationships.
- Decentralized Operations: Wal-Mart empowers store managers with decision-making authority, allowing them to respond to local market conditions and customer preferences.
Ultimately, the question of whether Wal-Mart is good for America is complex and subjective. It involves weighing the economic benefits, such as job creation and lower prices, against potential negative impacts, such as the effect on small businesses and labor practices. Different stakeholders may have varying opinions based on their perspectives and priorities.
Learn more about consumer link:
https://brainly.com/question/27773546
#SPJ11
In the country there is time of high inflation and the company would like to increase their cost of goods sold in order not to pay high taxes. 2 Points) The company would apply the First in first out method of inventory valuation as to increase ending inventory and thus increase the net operating income thus increasing profit to be taxable. The company would apply the Last in first out method of inventory valuation as to lower ending inventor and thus lower the net operating income thus lowering profit to be taxable. The company would apply the First in first out method of inventory valuation as to lower ending inventor and thus lower the net operating income thus lowering profit to be taxable.
In the country where there is time of high inflation and the company would like to increase their cost of goods sold in order not to pay high taxes.
The company would apply the Last in first out method of inventory valuation as to lower ending inventor and thus lower the net operating income thus lowering profit to be taxable. How the company will adjust its inventory valuation methods will depend on the tax law that governs its area. The companies that are faced with high inflation rates often use the LIFO method as it provides them with a tax shield. In times of high inflation, the cost of goods sold is high, and this increases the company's taxable income. LIFO allows the company to reduce its taxable income by increasing the cost of goods sold. Since the costs are higher, the company will be able to claim a higher deduction on its tax returns, thereby lowering the amount of taxes paid.
In conclusion, the main answer is that the company would apply the Last in first out method of inventory valuation as to lower ending inventor and thus lower the net operating income thus lowering profit to be taxable. This answer more than 100 words explains that the companies that are faced with high inflation rates often use the LIFO method as it provides them with a tax shield. LIFO allows the company to reduce its taxable income by increasing the cost of goods sold. This way, the company will be able to claim a higher deduction on its tax returns, thereby lowering the amount of taxes paid.
To know more about Inflation visit:
brainly.com/question/28136474
#SPJ11
Magnolia Incorporated has been concerned for some time with the financial performance of its product 1115 and has considered discontinuing it on several occasions. Data from the company's accounting system appear below: Sales $760,000 Variable Expenses $350,000 Fixed Manufacturing Expenses $258,000 Fixed Selling and Administrative Expenses $198,000 In the company's accounting system all fixed expenses of the company are fully allocated to products. Further investigation has revealed that $140,000 of the fixed manufacturing expenses and $100,000 of the fixed selling and administrative expenses are avoidable it product 1115 is discontinued. What would be the effect on the company's overall net operating income il product 1115 were dropped? O a. $170,000.00 O b. $40,000.00 O c. $270,000.00 Od $310,000.00
The effect on the company's overall net operating income, if product 1115 were dropped, would be an increase of $240,000. (The options provided do not include the correct answer.)
Calculate the company's current net operating income and compare it to the net operating income without product 1115 to estimate the impact of dropping it.
Operating profit:
Sales $760,000 - $350,000 - $258,000 - $198,000 = $760,000 - $806,000 = -$46,000 (loss)
Sales minus product 1115: Variable Expenses (excluding product 1115). Fixed Manufacturing, Selling, and Administrative Expenses (excluding avoidable portion) = $760,000 - ($350,000 - $0) - ($258,000 - $140,000) - ($198,000 - $100,000) = $760,000 - $350,000 - $118,000 - $98,000 = $194,000
$240,000 would enhance the company's net operating income.
To know more about operating income
https://brainly.com/question/25895372
#SPJ11
A candy manufacturer needs to buy a large quantity of cocoa to make chocolates for February 14, which it will make and ship to stores in December, 2021. Assume that she considers hedging with coca futures in April, 2021 owing to the speculative nature of cocoa prices.
What is her hedging strategy and how would she execute it?
Explain in detail, step by step.
Be specific about dates, provide example scenarios of price changes.
Looking up the characteristics (weight measure, volume, price levels) for cocoa contracts will be very helpful in this task.
To hedge the cocoa price for the candy manufacturer's chocolate production in February 2022, the hedging strategy can involve utilizing cocoa futures contracts. Here's a step-by-step guide on how the candy manufacturer can execute the hedging strategy:
Determine the required quantity of cocoa: The candy manufacturer needs to calculate the quantity of cocoa needed for chocolate production. This can be based on the expected production volume, desired chocolate recipe, and historical cocoa usage data.
Research cocoa futures contracts: The candy manufacturer should gather information about cocoa futures contracts available in the market. This includes understanding the contract specifications such as weight measure, volume, and price levels. These details can be obtained from commodity exchanges or market data providers.
Determine the suitable contract size: Considering the required quantity of cocoa, the candy manufacturer should select the appropriate contract size that aligns with their production needs. For example, if the required cocoa quantity is 10,000 pounds, and the cocoa futures contract size is 50,000 pounds, they may need to enter into multiple contracts or use fractional contracts.
Choose the appropriate futures contract: Based on the desired hedging timeline (e.g., April 2021), the candy manufacturer should select a cocoa futures contract with an expiration date that covers the period when they need to secure the cocoa for their chocolate production in December 2021.
Assess the risk tolerance: The candy manufacturer should evaluate their risk tolerance level and decide the extent of hedging required. They can choose to hedge a portion of the cocoa requirement or hedge the entire quantity.
Determine the hedge ratio: The hedge ratio represents the proportion of the cocoa quantity that needs to be hedged. It is determined based on the relationship between the cocoa futures contract size and the required cocoa quantity. For example, if the hedge ratio is 0.8, it means the candy manufacturer will hedge 80% of the required cocoa quantity.
Execute the hedge: The candy manufacturer can execute the hedge by entering into cocoa futures contracts in April 2021. They can contact a commodity broker or use an electronic trading platform to place hedging orders. The number of contracts will depend on the hedge ratio and the contract size.
Monitor and adjust the hedge: After executing the hedge, the candy manufacturer needs to monitor the cocoa futures prices and compare them with the physical cocoa prices. If there are price changes, they should assess the impact on their chocolate production costs. If necessary, adjustments can be made by either buying or selling additional contracts to maintain the desired hedged position.
Example scenario:
Let's assume the candy manufacturer requires 20,000 pounds of cocoa for chocolate production. They choose cocoa futures contracts with a size of 50,000 pounds. The April 2021 cocoa futures price is $2,000 per contract.
Step 1: Determine the required quantity of cocoa: 20,000 pounds.
Step 2: Research cocoa futures contracts: Identify cocoa futures contracts with specifications such as weight measure, volume, and price levels.
Step 3: Determine the suitable contract size: Select contracts with a size of 50,000 pounds.
Step 4: Choose the appropriate futures contract: Select a cocoa futures contract that covers the desired hedging timeline.
Step 5: Assess the risk tolerance: Determine the extent of hedging required.
Step 6: Determine the hedge ratio: Suppose a hedge ratio of 0.8 is chosen, which means hedging 80% of the cocoa requirement (16,000 pounds).
Step 7: Execute the
To learn more about hedging, click here: brainly.com/question/28212917
#SPJ11