for the following chair conformations of 1,3-dibromocyclohexane, determine the orientations of the two substituents, and determine if the conformation is cis or trans.

Answers

Answer 1

The way the bonds are built will determine how they are oriented. Additionally, the relative orientation of bonds affects conformation. Dibromocyclohexane is used to study the conformation.

How can you tell whether a molecule is chiral or not?

Having a few very notable exceptions, the general rule is that molecules with at least one stereocenter are chiral, while molecules with no stereocenters are achiral. In most circumstances, an easiest approach to determine whether a molecule is chiral or achiral is to seek for one or even more stereocenters.

What does cis in cyclohexane refer to?

Two substituent groups inside the same plane are regarded to be the cis isomer of cyclohexane (either equatorial or axial). Cis-1-methyl-4-hydroxymethyl cyclohexane is cyclohexane with a methyl group in the axial plane (-CH3)also the hydroxyl group (-OH).

To know more about dibromocyclohexane visit:

https://brainly.com/question/14168127

#SPJ4


Related Questions

I need help on 9, 10, 11, and 12

Answers

The limiting reactant and excess reactant can be determined by a concept known as the Law of Conservation of Mass.

The limiting reactant and excess reactantLimiting Reactant: H2O, Excess Reactant: O2Limiting Reactant: Mg(OH)2, Excess Reactant: HCILimiting Reactant: Fe2O3, Excess Reactant: ZnLimiting Reactant: CuSO4, Excess Reactant: AgNO3This law states that matter can neither be created nor destroyed. Therefore, the amount of each reactant must be equal to the amount of each product. By looking at the chemical equation and the amount of each reactant, the limiting reactant is the one that is used up first and therefore determines the amount of products that can be made. The excess reactant is the one that is left over once the limiting reactant has been exhausted. For example, in problem 9, the equation is 2H2O + O2 →→ 2H2O2 and the amounts are 5 mol H2O and 15 mol O2. Since oxygen is used up first, it is the limiting reactant and hydrogen is the excess reactant. In problem 10, the equation is Mg(OH)2 + 2HCI→→ MgCl2 + 2H2O and the amounts are 6 mol Mg(OH)2 and 20 mol HCI.Since magnesium is used up first, it is the limiting reactant and hydrochloric acid is the excess reactant. In problem 11, the equation is 3Zn + Fe2O3→ 3ZnO + 2Fe and the amounts are 4 mol Zn and 2 mol Fe2O3. Since zinc is used up first, it is the limiting reactant and iron oxide is the excess reactant. In problem 12, the equation is CuSO4 + 2AgNO3 → Cu(NO3)2 + Ag₂SO4 and the amounts are 13 mol CuSO4 and 22 mol AgNO3. Since copper sulfate is used up first, it is the limiting reactant and silver nitrate is the excess reactant.

To learn more about The limiting reactant and excess reactant refer to:

https://brainly.com/question/14222359

#SPJ1

A rocket travels in a straight line at a speed of 5000 m/s. After 1 min, it is 10,000 m/s. What is the rocket's acceleration?

Answers

A rocket travels in a straight line at a speed of 5000 m/s. After 1 min, it is 10,000 m/s. 83.33ms⁻² is the rocket's acceleration.

What is an acceleration ?

The rate of change of velocity is defined as acceleration. Acceleration usually indicates that the speed is changing, but this is not always the case. When an object moves in a circular path at a constant speed, it is still accelerating because its velocity direction changes.

Vf = Vo + at

Vf = Final velocity

Vo = Initial Velocity

a = acceleration

t = time required

Making "a" the subject

a = Vf - Vo/(t)

a = 10,000–5,000/(60)

a = 5,000/60

a = 83.33ms⁻²

Thus, 83.33ms⁻² is the rocket's acceleration.

To learn more about an acceleration, follow the link;

https://brainly.com/question/12550364

#SPJ1

you analyze a sample of carbon and determine that 6% of the carbon atoms in your sample have a mass number (atomic mass) greater than 12, (12 is the normal atomic mass of carbon). based on these results, which of the following can you reasonably conclude?

Answers

If you analyze a carbon sample and discover that 6% of the carbon atoms have an atomic number greater than 12, you may safely assume that 6% of the sample is made up of carbon isotopes.

Carbon-12 (12 C), which has six neutrons in addition to its six protons, is by far the most common isotope of carbon. The following-heaviest isotope of carbon, carbon-13 (13 C), has seven neutrons. They are both referred to as stable isotopes since neither 12 C nor 13 C experience radioactive decay over time. The nuclear charge number (sign Z) of an atomic nucleus is the chemical element's atomic number. The proton number in regular nuclei is equivalent to this (np).

Learn more about atomic number here

https://brainly.com/question/16858932

#SPJ4

Charlotte is driving at 69.8 mi/h and receives a text message. She looks down at her phone and takes her eyes off the road for 3.27 s. How far has Charlotte traveled in feet during this time?

Answers

Charlotte is driving at 69.8 mi/h and receives a text message. She looks down at her phone and takes her eyes off the road for 3.27 s.  102.02 m  far has Charlotte traveled in feet during this time.

What is speed ?

The term speed is defined as the rate of change of position of an object in any direction.

Given:

The speed at which charlotte is driving = 69.8 mi/h

The time which she took of her eyes from the road = 3.27 s

During the entire journey, the time at which she took her eyes off the road, she is probably not driving.

We will have to convert the 69.8 mi/h to m/s

Since 1 mi/hr = 0.44704 m/s

69.8 mi/h will be:

= (69.8 mi/hr × 0.44704 m/s) ÷ 1 mi/hr

= 31.20 m/s

Now, using the relation:

Speed = distance/ time

31.20 m/s = (distance)  / 3.27s

By Cross multiplying

Distance = 31.20 m/s  × 3.27s

Distance = 102.02 m

Thus, Charlotte traveled by feet for 102.02 m during this time.

To learn more about the speed, follow the link;

https://brainly.com/question/28224010

#SPJ1

in a 52 weeks high and low, if the numbers show difference between each other, there is less risk of loss - but there is also less opportunity for gain, either.

Answers

Smaller numbers mean less risk of losing, but  less chance of gain, Volatility.

What is gain?In electronics, gain is a measure of the ability of a two-terminal circuit (often an amplifier) ​​to increase the power or amplitude of a signal from its input. Adjusting the gain control sets the amount of distortion in the sound no matter how loud the final volume is set. This means  that the gain setting determines how clean or dirty the sound is, regardless of the master volume setting.Gain is simply the amplification factor, i.e. the parts of the output power to input power. Wins are often expressed in percentages, especially for small wins. Example 3% of ratio signifies to a power gain of 1.03.

to learn more about gain from the given link:

https://brainly.com/question/28891489

#SPJ1

Which of the following is not one of the four most common elements found in living organisms? (a) Hydrogen
(b) Carbon
(c) Sulphur
(d) Nitrogen

Answers

A element that does not belong to the four elements that are most frequently found in living things is sulfur.

What do you mean by element?

A fundamental object that is difficult to divide into smaller bits is known as an element. An element is a chemical that cannot be broken by non-nuclear reactions in chemistry or physics. A discrete component of a bigger structure or collection is referred to as an element in computers and mathematics.

What constitutes an element?

Each element is made up of atoms which are composed of neutrons, electrons, and neutrons. Two distinct atom types can be combined to form a compound. Although a molecule cannot be distinguished from the larger material, it shares many characteristics with it.

To know more about element visit:

https://brainly.com/question/8460633

#SPJ4

in which of the following systems is(are) work done by the surroundings on the system? assume pressure and temperature are constant.
a. 2SO2(g) + O2(g) → 2SO3 (g)
b. CO2 (s)→ CO2(g)
c. 4NH3(g) + 7O2(g) → 4NO2 (g) + 6H2O(g)
d. N2O4 (g) → 2NO2(g)
e. CaCO3 (s) → CaCO (s) + CO2(g)

Answers

The systems that work done by the surroundings on the system are  CO₂ (s)→ CO₂(g) and  CaCO₃ (s) → CaCO (s) + CO₂(g). The correct answer is b and e.

When a system transitions from one state (one set of values for its physical attributes) to another state, a process known as the thermodynamic process takes place. When all of the system's macroscopic physical properties regain their original values, the system is said to have returned to its initial state. If the system is doing the job, it has a negative sign.

W = ΔP V is the formula for determining work given pressure (P) and volume (ΔV) changes.

W= negative for any work done by the system on the environment.

ΔV must be a positive number.

When a system transitions from a lower active state, such as solid to liquid, solid to gas, or liquid to gas, V is positive.

As a result, choices (B) and (E) are suitable responses.

Learn more about work done at https://brainly.com/question/14581707

#SPJ4

important of science

Answers

Answer:Science is important because science

is the the way to know about other things that we didn't know about our planet and many other things.

Explanation:thank you hope it

The colors in this image show topography. The warm colors-red, pink, and yellow- represent landforms above sea level. The greens and blues indicate changes in topography below sea level. Deep in the Atlantic Ocean is an enormous mountain range, longer than any on land, shown here as a linear feature green. What is this underwater mountain range, and why is it almost exactly in the middle of the ocean? With your partner, discuss why you think there is a mountain range deep under the ocean's surface. What do you make of this feature? Record your thoughts below.

Answers

The underwater mountain range that is shown in the image is the Mid-Atlantic Ridge. This range runs down the center of the Atlantic Ocean, and is a part of the global mid-ocean ridge system.

The Mid-Atlantic Ridge is a divergent plate boundary, which means that it is an area where two tectonic plates are moving away from each other. As the plates move apart, magma from the Earth's mantle rises to the surface and cools, forming new crust. This process of seafloor spreading is what creates the underwater mountain range.

What is the Mid-Atlantic Ridge about?

One possible explanation for the location of the Mid-Atlantic Ridge in the middle of the ocean is that it is a response to the convective motion of the Earth's mantle. The mantle is made up of hot, dense rock that is constantly moving around.

Another possible explanation is that the Mid-Atlantic Ridge is the result of past tectonic activity. The Atlantic Ocean was formed by the separation of the supercontinent Pangea into two parts, Laurasia and Gondwana. The ridge is a remnant of the rift that separated these two supercontinents.

In all, the Mid-Atlantic Ridge is a fascinating feature that provides important information about the Earth's geology and tectonic activity. Its location in the middle of the ocean is a reminder of the dynamic nature of our planet, and the ongoing process of seafloor spreading that is constantly shaping the Earth's surface.

Learn more about topography from

https://brainly.com/question/24146311

#SPJ1

If an asteroid created enough dust to block out the Sun, what would be the effect on green plants, as well as other life on Earth? Why?

Answers

If an asteroid created enough dust to block out the Sun, it would likely have a severe and devastating effect on life on Earth.

Green plants, which rely on sunlight for photosynthesis, would not be able to produce the energy they need to survive, leading to mass die-offs of vegetation. This would in turn have a cascading effect on the entire ecosystem, as animals that depend on plants for food would also struggle to survive. The lack of sunlight would also cause a decrease in temperature, which can have a negative impact on many organisms.

The lack of sunlight would also have a severe impact on the climate and weather patterns, leading to a "nuclear winter" scenario, where the temperature drops significantly, leading to the extinction of many species, including the human species, who rely on the food chain.

heating use copper tubing Hot water runs through and heats the copper tubing , which in heats aluminum finsis actually the aluminum fins that heat the air rising through the How much energy would it take to heat a section of the copper tubing that weighs about 555.0 gfrom 1.89 deg * C to 27.75 deg * C Copper has a specific heat of 0.3850(J/g)*^ C. Express your answer to four significant figures .m

Answers

A total of 1397 j of heat are required, a substance's specific heat is the amount of energy required to increase its temperature by one degree Celsius (°C) for one gram of that substance.

Describe precise heat in your own words?

A substance's specific heat is the amount of energy required to increase its temperature by one degree Celsius (°C) for one gram of that substance.

In comparison to other substances, water has a high specific heat, which means that raising its temperature requires more energy.

Explanation:

Data provided

Copper tubing weighs 595.0 g in total.

15.18 °C when temperature is initial

Finished temperature was 21.28 °C.

Copper's particular heat is equal to 0.3850 j/g°C.

Heat needed in terms of =?

Solution:

Thermodynamic shift

ΔT = T2 - T1

ΔT = 21.28 - 15.18 = 6.1 °C

Formula:

Q = m. c. ΔT

Q is the heat flux

m Equals mass

c is the specific heat

T is the temperature change.

The values will now be entered into the formula.

Q = m. c. ΔT

Q = 595 g. 0.3850 j/g°C . 6.1 °C

Q = 1397.36 j

A total of 1397 j of heat are required.              

To learn more about specific heat refer to:

https://brainly.com/question/27991746

#SPJ1

The free-energy change, ΔG, for the chemical reaction A → B is 0 kcal/mole at 37°C when the concentrations of A and B are 10 M and 0.1 M, respectively. What is the free-energy change for the reaction when the concentrations of A and B are 0.01 M and 1 M, respectively?

Answers

The free energy change for the same reaction when the concentrations of A and B are 0.01 M and 1 M, respectively, is -2.501 kJ/mol.

The free energy change, ΔG, for the chemical reaction A → B is determined by the equation ΔG = -RT ln(K), where R is the gas constant, T is the temperature, and K is the equilibrium constant.

Because the temperature of the reaction is held constant, the ΔG will remain the same no matter what the concentrations of A and B are.

To calculate the free energy change for the reaction when the concentrations of A and B are 0.01 M and 1 M, respectively, we need to calculate the new equilibrium constant, K.

K is equal to the product of the concentrations divided by the reactants. For this reaction, K = (1 M)(0.01 M)/(10 M) = 0.001.

Plugging this value of K into the equation for ΔG,we get

ΔG = -RT ln(K) = -(8.314 J/K mol)(310 K) ln(0.001) = -2.501 kJ/mol.

This is the free energy change for the reaction when the concentrations of A and B are 0.01 M and 1 M, respectively.

To learn more about energy, click here:

https://brainly.com/question/1932868

#SPJ4

hemiacetals are the product of a reaction between oh oh an aldehyde and one equivalent of alcohol. h r3 similarly, hemiketals form by a reaction between a r or1 or1 r ketone and one equivalent of alcohol. the reaction hemiacetal hemiketal can be either inter- or intramolecular. the general structures are:

Answers

When an aldehyde or ketone combines with an alcohol in the presence of a potent acid catalyst, hemiacetals are the intermediate molecules that result.

What is hemiacetal?

Alcohol and ether are joined to the same carbon atom as hemiacetals. Hydrogen is positioned at the fourth bonding position. An aldehyde is the precursor of a hemiacetal.

A hemiacetal's basic structure is R1-C(OH)-R2-whereas a hemiketal's basic structure is R1-C(OR2)-R3-. Intermolecular reactions can occur depending on the starting components and environmental factors. The removal of the alcohol readily transforms hemiacetals and hemiketals into the equivalent aldehyde or ketone, indicating that in general, these molecules are relatively unstable.

To know more about hemiacetal, visit:

brainly.com/question/28030326

#SPJ4

A bag of potato chips is sealed in a factory near seal level. The atmospheric pressure at the factory is 761.3 mm Hg. The pressure inside the bag is the same. What is the pressure inside the bag of potato chip in kPa? kPa (ROUND TO THE NEAREST WHOLE NUMBER WHEN TYPING YOUR ANSWER.)

50 points

Answers

To convert the pressure inside the bag from mm Hg to kPa, we can use the conversion factor:

1 kPa = 7.5 mm Hg

So, we can divide the pressure in mm Hg by 7.5:

761.3 mm Hg / 7.5 = 101.5 kPa

So, the pressure inside the bag of potato chips is approximately 101.5 kPa.

It is important to note that the conversion factor of 1 kPa = 7.5 mm Hg, is an approximation and it can vary depending on the temperature and altitude.

Therefore, the pressure inside the bag of potato chip in kPa is 101 kPa (rounded to the nearest whole number)

which of the following elements will have s and p orbitals
he
li
ca
o

Answers

Refer to number of electrons in the elements,
He, 2 electrons 1s2
Li, 3 electrons 1s2 2s1
Ca, 20 electrons 1s2 2s2 2p6 3s2 3p6 3d2
O, 8 electrons 1s2 2s2 2p4

Thus,
Ca and O has s and p orbital

A block of aluminum occupies a volume of 10mL and has a mass of 40 g.
What is its density? (D = M/V)

Answers

Density of a block of aluminum occupies a volume of 10mL and has a mass of 40 g is 4g/ml.

Define density.

A material's density is determined by how closely it is packed. As the mass per unit volume, it has that definition. The relationship between density and volume and mass is inverse.

The density rises if the volume remains constant while the amount of matter increases. Density drops when volume grows without accompanying increases in mass. When a substance is heated, the molecules move faster and slightly farther apart, taking up more space and causing the density to drop. When something is cooled, the molecules slow down and get a little closer together, taking up less space and becoming denser.

D = M/V

Mass, M is 40 g.

Volume, V of 10mL

Density, D will be 40/10 i.e. 4g/ml.

To learn more about density use link below:

https://brainly.com/question/26364788

#SPJ1

Explain why the name shown below is incorrect for the compound MgCl,?
Name: Magnesium Dichloride

Answers

MgCl is not Magnesium Dichloride because of the word “Dichloride.” The prefix “Di” represents “2.” And “Tri” represents “3,” and so on. Since Cl (chloride) is only 1 in this formula, the name is “Magnesium Chloride.”

If the formula was MgCl2, then yes, it would be Magnesium Dichloride.

Determine the oxidation state of the transition metal in each of these coordination compounds:
{eq}a) \ [CoBr(NH_3)_5]Br\\ b) \ [PtCl(CO)_3]Cl_3\\ c) \ Na_2[CuCl_4(H_2O)_2] {/eq}

Answers

The oxidation state of the transition metal in the coordination compounds is as follows :

a) [CoBr(NH₃)₅]Br is +2

b) [PtCl(CO)₃]Cl₃ is + 4

c) Na₂[CuCl₄(H₂O)₂] is +2

a) [CoBr(NH₃)₅]Br

Charge on Br = -1

Charge on NH₃ = 0

The oxidation state of Cobalt is :

Co - 1 - 1 = 0

Co = + 2

b) [PtCl(CO)₃]Cl₃

The Charge on Cl = -1

The Charge on CO = 0

The oxidation state of platinum is :

Pt - 1 - 3 = 0

Pt = + 4

c) Na₂[CuCl₄(H₂O)₂]

The charge on Na = + 1

The charge on Cl = - 1

The oxidation state of Copper is :

2 + Cu - 4 = 0

Cu = + 2

To learn more about oxidation state here

https://brainly.com/question/20750330

#SPJ4

Drag and drop the following building materials from lowest to highest based on their
porosity.
Lowest
Concrete
Oak
2nd Lowest
Clay
2nd Highest
Slate
Highest

Answers

Due to their porous and permeable nature, gravel and sand are excellent aquifer materials. The most permeable material is gravel.

What is porosity of building materials?The porosity of a substance is determined by how much of its total volume is made up of such spaces as a proportion of its entire volume made up of solids and pores. Common building materials like plaster, concrete, and brick all have varying degrees of porosity, falling between 50% and 65% for plaster, 40% for concrete, and 55% for brick.Glass, polymers, metals, and varnished wood are a few materials that don't have pores.Microporous, mesoporous, and macroporous materials are the three sizes of porous materials, respectively.Due to their frequent formation at depth and interlocking crystal structure, igneous or metamorphic rocks have the lowest primary porosity.

To learn more about materials refer to:

https://brainly.com/question/17563681

#SPJ1

The compound diborane (B₂H6) was at one
time considered for use as a rocket fuel. Its
combustion reaction is
B2H6(g) + 3 O2(l) → 2 HBO2(g) + 2 H₂O(l)
The fact that HBO2, a reactive compound,
was produced rather than the relatively inert
B₂O3 was a factor in the discontinuation of
the investigation of the diborane as a fuel.
What mass of liquid oxygen (LOX) would be
needed to burn 190.3 g of B₂H6?
Answer in units of g. Answer in units of g.

Answers

Answer:

1583.76 g O2

Explanation:

For every one molecule of B2H6 that reacts, 3 molecules of O2 are needed. To determine the mass of liquid oxygen (LOX) needed to burn 190.3 g of B2H6, use the balanced equation as a conversion factor.

1 mole of B2H6 = 28.02 g

1 mole of O2 = 32 g

Using the balanced equation above, you know that for every 1 mole of B2H6, 3 moles of O2 are needed.

Therefore, the mass of O2 needed for 190.3 g of B2H6 is:

190.3 g B2H6 * (3 moles O2 / 1 mole B2H6) * (32 g O2 / 1 mole O2) = 1583.76 g O2

The compound diborane (B₂H6) was at one
time considered for use as a rocket fuel. Its
combustion reaction is
B₂H6(g) + 3 O2(l) → 2 HBO2(g) + 2 H₂O(l)
The fact that HBO2, a reactive compound,
was produced rather than the relatively inert
B203 was a factor in the discontinuation of
the investigation of the diborane as a fuel.
What mass of liquid oxygen (LOX) would be
needed to burn 190.3 g of B₂H6?
Answer in units of g. Answer in units of g.

Answers

the mass of liquid oxygen (LOX) that would be needed to burn 190.3 g of B2H6 is approximately 332.9 g.

Finding the  mass of liquid oxygen (LOX)

The mass of B2H6 is given as 190.3 g, and the molar mass of B2H6 is 27.66964 g/mol.

So using this molar mass, we can find the number of moles of B2H6 using the following calculation:

190.3 g / 27.66964 g/mol = 6.918 moles of B2H6

Now we use the balanced equation to find the number of moles of O2 that are needed.

B2H6(g) + 3 O2(l) → 2 HBO2(g) + 2 H2O(l)

The coefficient of O2 on the reactant side is 3, so for every 3 moles of O2 consumed, 2 moles of B2H6 are consumed.

Therefore, we can use the following conversion factors to find the moles of O2 needed:

6.918 moles B2H6 x 3 moles O2/2 moles B2H6 = 10.377 moles O2

To find the mass of O2 that is needed, we will use the molar mass of O2 which is 32 g/mol

10.377 moles O2 x 32 g/mol = 332.9 g O2

So the mass of liquid oxygen (LOX) that would be needed to burn 190.3 g of B2H6 is approximately 332.9 g.

Laern more on how to find  mass of liquid oxygen (LOX) : https://brainly.com/question/8854450

#SPJ1

consider a sample containing 1 mol of an ideal gas in a flexible, closed container. what of the changes will cause the volume to decrease?

Answers

A sample containing 1 mol of an ideal gas in a flexible, closed container. The changes will cause the volume to decrease is :

1) To decrease the temperature and the increase in pressure.

2) Temp decreases and pressure remains constant.

The ideal gas equation is as follows :

P V = n R T

Number of moles = 1 mol

n = 1

V = R T / P

The temperature is directly proportional to the volume and the pressure is inversely proportional to the volume.

So, the conditions that will decreases the volume are :

1) To decrease the temperature and the increase in pressure.

2) Temp decreases and pressure remains constant.

To learn more about ideal gas here

https://brainly.com/question/24928212

#SPJ4

Which statement is the scientific rationale for prescribing and administering donepezil (Aricept), a cholinesterase inhibitor?
A. Aricept works to bind the dopamine at neuron receptor sites to increase ability.
B. Aricept increases the availability of acetylcholine at cholinergic synapses.
C. Aricept decrease acetylcholine in the periphery to increase movement.
D. Aricept delays transmission of acetylcholine at the neuronal junction.

Answers

The scientific basis for prescribing and giving donepezil (Antidepressants), a cholinesterase inhibitor, is that it enhances the accessibility of acetylcholine through cholinergic synapses.

A cholinesterase inhibitor's function is what?

The degradation of acetylcholine is slowed down by cholinesterase inhibitors. They use it to treat dementia, including signs of Alzheimer's. This activity discusses the many applications of alkylating drugs in the treatment of neurodegenerative disorders as well as their recommendations, modes of action, and restrictions.

What are the three cholinesterase inhibitors?

Galantamine as well as rivastigmine are two of the three antidepressants that have been approved for the management of cognition brought on by Parkinson disease. They are thought to work by compensating for reduced cholinergic synaptic transmission, which is another feature of VCI.

To know more about cholinesterase inhibitor visit:

https://brainly.com/question/28274707

#SPJ4

given that the molecular weight of naturally occurring oxygen is 15.99938 amu, and the following table, compute the molecular weights of

Answers

The natural abundance of 36Ar is 0.337%, and its molecular weight is 35.96755 amu. The natural abundance of 38Ar is 0.063%, and its molecular weight is 37.96272 amu. The natural abundance of 40Ar is

The total atomic weight of every atom in a substance's molecule is that substance's molecular weight. Common units of measurement include atomic mass units (amu) and daltons (Da). The number of atoms of each element present in a molecule is multiplied by the atomic weight of that element, and the sum of all these values is used to determine the substance's molecular weight. An essential physical characteristic that may be utilised to identify a material and forecast how it will behave in chemical reactions is its molecular weight. The molar concentration of a solution is calculated, the amount of a drug contained in a sample is determined, and many more practical applications are also employed.

Learn more about molecular weight here:

https://brainly.com/question/27988184

#SPJ4

draw the structure of the product of this reaction. use the wedge/hash bond tools to indicate stereochemistry where it exists. if there are alternative structures, draw the most stable one. if no reaction occurs, draw the organic starting material.

Answers

The E2 elimination reaction of cyclo-alkylhalides are usually stereo selective. Usually trans isomer reacts slowly than cis-isomer. So the elimination reaction in an alkaline potassium hydroxide medium will be  1-methyl cyclohexene.

The reason behind stereo selectivity is because pf the spatial orientation of the substituents on the ring structure. For cyclic compounds this has a great influence to direct a reaction in Regio-selectivity. The transition state between the reactant and product  influence in the rate of elimination reaction.

Here the major elimination product is 1-methyl cyclohexene and a minor amount of 3-methyl cyclohexene is also produced.

For more information regarding elimination reaction, kindly refer

https://brainly.com/question/28239179

#SPJ4  

   

(The question is not complete. The complete question is given as an image)

the value of the equilibrium constant k is a measure of how far the reaction proceeds toward the products at a given temperature. a small value of k indicates that the reaction favors the , whereas a large value of k indicates that the will be present in a higher proportion. multiple choice question.

Answers

The fill in the blanks is as follows :

a) Reactants

b) Products

The value of the equilibrium constant k is the measure of how far will the reaction proceeds toward produce the products at a temperature.

a) A small value of k indicates that the reaction will favors the reactants.

b) Whereas a large value of k indicates that the "product" will be present in the higher proportion.

The equilibrium reaction is the state of the reaction where the rate of the forward reaction is equals to the rate of the backward reaction. The rate of the forward reaction is equals to the rate of the backward reaction.

This question is incomplete , the complete question is :

The value of the equilibrium constant k is a measure of how far the reaction proceeds toward the products at a given temperature. a small value of k indicates that the reaction favors the , whereas a large value of k indicates that the will be present in a higher proportion. multiple choice question.

a) Reactant

b) Product

c) Both reactant and product

To learn more about equilibrium reaction here

https://brainly.com/question/15118952

#SPJ4

fill in the blank. complete the energy maximum electron capacity for each energy level. energy level 1 maximum electron capacity is choose___ . energy level 2 maximum electron capacity is choose___. energy level 3 maximum electron capacity is choose___. energy level 4 maximum electron capacity is choose___.

Answers

The maximum electron capacity at energy level 1 is 2. The maximum electron capacity at energy level 2 is 8. Maximum electron capacity at energy level 3 is 18. The maximum number of electrons at energy level 4 is 32.

What is electron?

Having a negative electric charge, an electron is a subatomic particle. Together with protons and neutrons, it is one of the basic building blocks of atoms.

The chemical characteristics of elements are determined by electrons, which are found in the valence shell, the outermost shell of an atom. In addition, they have a role in the production of magnetism, electrical conduction, and chemical processes. Additionally, as in an electron beam, electrons can also exist freely and independently.

To know more about electron, visit:

brainly.com/question/1255220

#SPJ4

TRUE OR FALSE the number of transporters directly corresponds to the rate at which solutes may diffuse, the more transporters present, the faster the rate of diffusion.

Answers

False. The number of transporters present in a cell membrane does not directly correspond to the rate at which solutes may diffuse.

Transporters are proteins that span the cell membrane and actively transport specific molecules across the membrane, against their concentration gradient, using energy from ATP. They do not increase the rate of diffusion of solutes which is passive movement of solutes from high concentration to low concentration areas.

Diffusion rate is determined by several factors, including the concentration gradient of the solute, the permeability of the membrane to the solute, and the temperature. The presence of transporters may affect the overall rate of solute transport across the membrane, but this is not the same as the rate of diffusion.

To learn more about Transport click here:

https://brainly.com/question/29759743

#SPJ4

Consider the composition. information from the SDS. What is a possible name of this compound?

A. Glycine
B. Glycogen
C. Glycerol​

Answers

The compound that we have in the SDS is glycerol.

What is the SDS?

We know that the SDS is the acronym that stands for the safety data sheet. This is the kind of sheet that tells us about the properties of a substance and any other safety information that we might need.

From the information, we can see that compound is not flammable and that it does not vaporize quite easily thus it is quite safe and this would correspond to glycerol. This corresponds to the safety data sheet that we have.

Learn more about glycerol:https://brainly.com/question/9944804

#SPJ1

Enter your answer in the provided box. Hydrogen sulfide decomposes according to the following reaction, for which Kc 9.30x10 S at 700 C: 2 H2 S(g) 2 H2(g)+S2(g) If 0.49 mol of H2 (g) at 700 C? S is placed in a 3.0-L. container, what is the equillbrium concentration of H

Answers

When the Hydrogen sulfide decomposes according , the equilibrium concentration of H₂ is 0.0019 mol/L.

Given that :

Numbers of moles of H₂S = 0.49 moles

The Volume = 3.0 L

The Equilibrium constant = 9.30 × 10⁻⁸

The reaction is given as :

2H₂S    ⇄   2H₂(g)  +  S₂(g)

Initial concentration = 0.49 / 3

                                  = 0.16 mol

                     2H₂S    ⇄             2H₂(g)  +         S₂(g)

Initial         0.9166                           0                           0

Change       -2 x                               +2 x                      + x

Equilibrium   (0.16 - 2x)                   2x                         x

kc  = [H₂]²[S₂]² / [H₂S]²

9.30 × 10⁻⁸ = (2x)²(x²) / ( 0.16 - 2x)²

x = 9.5 × 10⁻⁴

The equilibrium concentration for H₂ = 2x

                                                              = 2 ×  9.5 × 10⁻⁴

                                                              = 0.0019 mol/L

To learn more about equilibrium concentration here

https://brainly.com/question/14785440

#SPJ4

Other Questions
assume that you are the owner of campus connection, which specializes in items that interest students. at the end of january of the current year, you find (for january only) this information: sales, per the cash register tapes, of $150,000, plus one sale on credit (a special situation) of $2,500. with the help of a friend (who majored in accounting), you determine that all of the goods sold during january cost $70,000 to purchase. during the month, according to the checkbook, you paid $37,000 for salaries, rent, supplies, advertising, and other expenses; however, you have not yet paid the $900 monthly utilities for january. What are the areas of work of cooperatives? Write with examples. Julia had a bag filled with gumballs. There were 1 watermelon, 2 lemon-lime, and 3 grape gumballs. What is the correct sample space for the gumballs in her bag? Sample space = watermelon, lemon-lime, lemon-lime, grape, grape, grape Sample space = lemon-lime, watermelon, grape Sample space = 1, 2, 3, 4, 5, 6 Sample space = 1, 2, 3 This is most important agent of socialization that adolescence need to recognize what is the output of the following code?i = 5j = 2k = "sizes"l = "colors"print("There are", i, k, "and", j, l) it is one of the largest flat areas on earth and is one of the most fertile areas in the world. PLEASE HELPDetermine whether the statement makes sense or does not make sense, and explain your reasoning.By writing the imaginary number 14, I can immediately see that 14 is the constant and i is the variable.VIEW IMAGE priscilla was complaining to her friends at work about how much time she was spending trying to keep her house looking good in the springtime. basically, her issues were about what is the answer????? I need help please!! a 25.000 g saple of sulfur is burned. some of the sulfur reacts to form so2. the rest of the sulfur reacts to form so3. the total mass of the products (so2 and so3) is 58.723g. calculate the masses of so2 and so3 in this mixture Financial institutions could use an on balance sheet hedging strategy to lock-in the larger spread between _____ and ______ that may be obtainable in foreign markets. stocks; bonds government bonds; junk bonds government bonds, corporate bonds deposit rates; loan rates i have always depended on the kindness of strangers Write an informative essay explaining the different kinds of sacrifices people make, the value in making sacrifices, and how to determine when to make a sacrifice. This is what I have so far for my pre-writing; As individuals develop and experience the procedure of life, we start to understand that there things that we have to forfeit with the end goal for us to locate our actual ways. Penances can run from a profession way that you once longed for, family time, mingling, and even the ideal opportunity for recreation. Penances are a piece of life on the grounds that at last, these penances fabricate character in us when a figure is placed centrally in the picture without much of a backdrop, what specifically draws the eye of the viewer? which of these is not one of the three standard steps to follow when selecting a data structure to solve a problem? quantify the resource constraints for each operation analyze your problem to determine the basic operations that must be supported run simulations to quantify the expected running time of the program select the data structure that best meets the requirements determined in the prior steps of the process which of the following represents the site of most of the important chemical reactions within a prokaryotic cell? A professor wants to randomly select 4 students to go to the board. She decides torandomly select the sixth student who enters the classroom and every seventh studentafter that. Determine the students who will be going to the board. Write down the studentnumbers. Simplify the expression What is the length of the missing side?