Answer:
1. Tar Roads: The qualities of Tar that makes it ideal for road construction are:
The tar-like material that is used for road construction is a combination (emulsion) of water and liquid asphalt. It serves the purpose of permeating and closing up small lacerations in the existing pavement.
When the emulsion sticks to the "gravel" it reduces the potential for vehicles to skid on the road thus enhancing safety. The "gravel-like" emulsion is applied by rolling and sweeping.
Qualities of Tar are:
Adhesive: its the ability to stick to surfaces including materials such as gravel which it holds together makes it great for road construction;Waterproof: It is not water-soluble. Hence is not easily susceptible to the effects of running water. Resistant to High Temperature: The melting point of Tar is 54 degrees centigrade. The ground can heat up to 45 degrees celsius thus making Tar perfect for road construction as it can remain rigid even in the worst temperatures.2. Iron Burglar Bars
Steel bars are made from iron. The qualities of steel which make it perfect for securing places and things are:
Strength; This is the ability to withstand breakage and or destruction. Toughness: Steel is very tough and can not easily bend or break under static loads. Weldability: Most steel bars are actually welded together. Without this ability, steel probably would be useless as a material that can be used for protectionDurability: The only factor that degrades steel is rust. Rust happens when steel is exposed to oxygen which can be found in air and water.3.) Plastic Furniture
The primary qualities of plastic that make them suitable for furniture are:
Chemical stability: It does not rust or degrade when exposed to weather elements such as oxygen, water, etc. Good impact resistance: Depending on its thickness, plastic can bear a lot of weight and can take a lot of impact without deforming or breaking Good transparency and wear resistance: Plastic can be made transparent. This quality is essential for aesthetic purposes and hence can be used for various kinds of good-looking furniture. As furniture, its surface does not come off like hence it's durability.Low thermal conductivity: This means that it can bear heat without transmitting it easily. Ability to General formability, good coloring, low processing cost.4) Metal Jewellery
One of the best metals for jewelery is Tungsten. This is so because it is more durable and stronger than any other kind of material that can be used for jewelery purposes. It is about ten times harder than 18K gold and about four times harder than titanium. Other materials that can be used are:
titaniumstainless steel and cobalt5) Clay
In it's raw form, clay used for building might not be the best idea as it susceptible to water absorption and hence deformation which generally leads to a collapse of the structure. However, it becomes an excellent material of choice after it has been hardened into brick.
Brick is preferred in construction due to the following qualities:
hardnessHigh Compressive strength, Low Water AbsorptionFrost resistanceFireproofGreat Insulation6) Cotton is usually preferred as the material of choice for most kinds of clothing due to the following qualities:
Softness. The cotton plant is soft and fluffy and results in a fabric often retains that soft feel. Durability: Its molecular structure makes it able to last very long. Absorbency: it is able to absorb moisture/water. Hence making it more comfortable than synthetic materials High Dye Tolerance: Ability to hold dye well is an indespensable quality of a good fabric. You don't want to have a fabric whose colours are quick to fade. Breathability: This reduces is very important especially during summer or when the weather or environment is very hot.Cheers
The tar is roads that have quantities to make them deal with the construction. The liquid is a mix of asphalt and can be adhesive and waterproof.
The iron bars are used for securing the place and things. plastic furniture is used to make suitable furniture and is used for chemical stability etc. The metal jeweler is of titanium, cobalt and stainless steelLearn more about the following minerals.
brainly.com/question/26208691.
what two things can happen to the food made by plants?
Answer:
Food made by plants can get used by plants or by other animals as plants maybe eaten by other organisms that feed on plants by living on them, these organisms are called parasites. Or else the food can be used up by plants to carry out their metabolic activities ( activities at cellular level which keeps the plant alive ) like cellular respiration
Answer:
The food that is prepared by the plant is utilized for its metabolic processes, the excess food is stored in the form of starch, in the plants. ... The plants prepare starch by a process of photosynthesis with the sunlight along with "water and carbon dioxide
The food produced by the plants is in the form of sugar and the extra sugar produced is changed to starch and is stored in different parts of the plant such as in roots, stems, leaves, fruits and flowers.
Explanation:
hope this is what u want
hope it helps u
how does shell color work to protect the egg from sunlight?
Answer:
Birds that live in cool climates lay darker eggs, as darker colors absorb more heat from the sunlight
Birds that live in hotter climates lay lighter eggs to prevent the egg from overheating.
The pigmentation acts to thermo-regulate the internal temperature of the egg, acting as a buffer between the embryo and the outside world. It does this by preventing overheating of the egg, through reflecting the sunlight off the pigmentation, rather than allowing it to be absorbed through the shell
name the three major parts of a cell and their functions
Answer:
cell membrane cytoplasm nucleus
Explanation:
cell membrane controls what goes inside and out the cell
cytoplasm is where chemical reactions happen
nucleus contains genetic information and controls what happens inside the cell
1. The diagram below represents part of Earth's latitude-longitude system. 2 points
What is the latitude and longitude of point L?*
45°
30°
15° 0°
15° 30° 45°
30°
N
20°
10°
0°
LI
10°
20°
30°
O (A) 5º E 30°N
(B) 5° N 30°E
(C) 5° W 30° S
O (D) 5° S 30°W
Answer:
I am not sure but the answer must be C
What do producers dictate in
an ecosystem?
A. the size of the organisms
B. the age of the organisms
C. the amount of organisms
Answer:
C. The amount of organisms
Explanation:
Producers produce food from inorganic matter, this then makes food for other organisms in an ecosystem. The amount of producers dictates how much food is available, and by that how many organisms can be present.
In which stage of the cell cycle does the cell die
A) interphase
B) mitosis
C) apoptosis
When the Volume of Liquid was 60 mL what was its mass?
Answer:
60 grams or 0.060000 kg
Explanation:
The temperature at which air becomes saturated with water vapor is called the _____.
Answer:
dew point
Explanation:
List all six stages of the sensory pathway when an animal responds to information about its environment.
Explanation:
There basically four stages of sensory pathway when an animal responds to information about its environment.
and these stages of pathway are Reception, transduction, transmission, and perception.
The sensory receptors are commonly described as specialised neurons found in sense organs that helps detect and respond to stimuli. The six stages of the sensory pathway which an animal responds to information about its environment are:
Reception: This falla under sensation. It is simply a type of sensory receptors detect that stimulus is present.Transduction: This also falls under sensation. It is a type of sensory receptors whose work is mainly to convert stimulus energy into electrochemical energy.Transmission: This falls under sensation. It is when neural impulses leave sensory organs and moves to the brain.selection: This falls under perception. It acts as detectors that filter the stimuli by responding to particular features of a stimulus while also ignoring the rest.Organisation: This falls under perception: It is known to organise the characteristics of sensory stimuli in a meaningful manner. Interpretation: This Fall also under perception. It is known to give meaning to sensory stimuli.Sensation is simply regarded as a physiological process that uses sensory receptors in detecting and responding to stimuli.
Perception is referred to as the mental work of organising and interpreting sensory stimuli, making it meaningful.
Learn more from
https://brainly.com/question/25585487
if an earthworm is 18mm long and is photographed and the picture is magnified 2.5x how long will it be in the picture?
Answer:
The earthworm will be 45 mm long in the picture
Explanation:
From the problem, we can take the original size of the earthworm to be 18mm.
Magnification can be obtained using the formula:
magnification = observed size/ original size.
Recall, we are given that the magnification is 2.5.
Hence, can evaluate the size in the picture to be
2.5 X 18mm = 45mm
Comment on the folding of protein in vaccum
Answer:
Protein folding is a process by which a polypeptide chain folds to become a biologically active protein in its native 3D structure. ... The amino acids in the chain eventually interact with each other to form a well-defined, folded protein. The amino acid sequence of a protein determines its 3D structure.
llz follow me
12. Removing an organism from an ecosystem will have which of the following affects? Select all that apply.
A. Increase in biodiversity
B. Decrease in biodiversity
C. Increase in the overall health of the ecosystem
D. Decrease in the overall health of the ecosystem
Answer:
B and D
Explanation:
Biodiversity comes from having multiple types of organisms. This also allows different organisms to eat and create nutrients that is needed by all other organisms in the ecosystem.
- Which occurrence is the result of the cell cycle in unicellular organisms?
A. cell repair
B. cell growth
C. cell replacement
D. cell reproduction
Answer:
D
Explanation:
Cell reproduction is the result of the cell cycle in unicellular organisms. The correct option is D.
What is cell reproduction?Cells split to produce multiple cells with similar, if not identical, contents. This process is known as cellular reproduction.
Nuclear division during mitosis produces two somatic cells that are genetically identical to the parent cell and have the same genetic complement.
Asexual reproduction in prokaryotes takes the form of cell division in unicellular organisms.
When an organism splits in half, it creates two totally distinct daughter cells, a process known as binary fission. The daughter cells are identical to the parent cells genetically.
Most of the time, Paramecium reproduces asexually via budding, however in poor circumstances, they produce sexually.
Unicellular organisms have a variety of asexual reproduction strategies, including multiple fission, fragmentation, and budding.
Thus, the correct option is D.
For more details regarding cellular reproduction, visit:
https://brainly.com/question/30203012
#SPJ6
a radioactive element has a half-life of 3,000 years. if a sample of this element begins with a mass of 60 grams, how long would you have to wait for the mass to decrease to 15 grams
Answer:
N = 60 g
Half life : N/2 = 3000
N/4 = 15 g
Allergies, asthma, high blood pressure, and heart
disease are examples of conditions caused by
Answer:
pollen sorry
Explanation:
i only did this for the points but the real answer is:
Children with allergies, asthma may be at risk of heart problems, with an increased risk of developing high blood pressure, high cholesterol, and obesity. In addition, eczema, a condition that causes itchy, inflamed skin, was common to asthma. here you go! Have a great day!
what is Otis’s gene versions for body color
Answer:
giao
Explanation:
Why is a pasture-type system is
more labor intensive than
controlled systems?
A. There is greater maintenance of the
equipment.
B. There is greater need to handle diseases.
C. There is greater area to cover to observe and
manage the animals.
D. There is greater cost of feed per animal.
Answer:
The correct option is C.
There is greater area to cover to observe and
manage the animals.
Explanation:
This is because pasture type system refers to a large area of land where grasses are grown and animals are allow to graze the area of land to obtained nutrients. In this system there is large area of land where animals are well observed while feeding in order to prevent the risk of loss and attacks.
What happens after Telophase?
&
36/86
>
C
Answer:
The chromosomes begin to uncoil, which makes them diffuse and less compact. Along with telophase, the cell undergoes a process called cytokinesis that divides the cytoplasm of the parental cell into two daughter cells.
With the help of circulatory it produce blood cells.
A. Excretory
B. Muscular
C. Endocrine
D. Skeletal
Answer:
Skeletal
Explanation:
Think about the bone marrow.
Answer:
D. Skeletal
Explanation:
blood cells are formed in the red bone marrow of bones. Stem cells in the red bone marrow are called hemocytoblasts. They give rise to all of the formed elements in blood. If a stem cell commits to becoming a cell called a proerythroblast, it will develop into a new red blood cell.
How are gymnosperm seeds and angiosperm seeds different?
Answer:
angiosperms have seeds that are closed within an ovary, gymnosperms have no flowers or fruits, and have unenclosed seeds on the surface of scales or leaves
lest 5 Adaptation to oxygen up take for mounting climbers
where is the most energy stored in the ATP molecule stored
what three phases of the cell cycle are considered interphase
Answer:
The cell cycle has three phases that must occur before mitosis, or cell division, happens. These three phases are collectively known as interphase. They are G1, S, and G2. The G stands for gap and the S stands for synthesis.
Explanation:
The three phases of the cell cycle that are considered interphase include G1, S phase and G2.
The cell cycle can be divided into the interphase and mitotic (M) phases.The interphase can in turn be divided into a Growth G1 phase, synthesis (S) phase and Growth G2 phase.The synthesis of the genetic material (DNA) occurs in the S phase, whereas in G1 and G2 the cell synthesizes all materials required to enter into cell division.In conclusion, the three phases of the cell cycle that are considered interphase include G1, S phase and G2.
Learn more in:
https://brainly.com/question/1688608
A)x-linked
B)No answer text provided
C)recessive
D)dominant
Answer:
D)dominant
Explanation:
To assist in completing this question, you may reference the Animated Technique Video - Gel-Filtration Chromatography. Consider a mixture of four proteins with various molecular weights. A histone molecule weighs 15 kDa, a p53 molecule weighs 53 kDa, an actin molecule weighs 42 kDa, and an IgG molecule weighs 150 kDa. Arrange the molecules in order of their elution from a gel filtration column
Answer:
IgG molecule, p53 molecule, actin molecule, histone molecule
Explanation:
In a Gel-Filtration chromatography, the larger molecules elude faster from the gel than the small ones.
In a Gel-Filtration chromatography, there is a stationary phase and a mobile phase. The stationary phase has beads with pores. Small molecules enter the beads and descend through these beads' pores. On the other hand, large molecules do not enter the beads' pores, so they go down through the mobile phase faster than the small molecules. Since they do not have the obstacle of the pores, they descend between the beads more fluidly. As a result, the larger molecules elute first from the gel than the small molecules.
What is your opinion about minor children (under the age of 18) donating one of their kidneys for their brother or sister? Write at least three sentences stating your opinion and backing your answer.
is the above cell a plant cell or animal cell? provide two observable
Explanation:
you have not showed the cell..please
Which types of energy would fall under the form of Kinetic Energy? Mark all that
apply.
Thermal Energy
Nuclear Energy
Electromagnetic Energy
Mechanical Energy
Chemical Energy
1. The expression of Hitchhikers thumb is due to recessive gene expression and you can express it. Use alphabet H. What is your genotype?
Which feature is found in both cartilage and bone ?
Answer:
The features that are found in both cartilage and bone are, living cells embedded in a matrix
Explanation:
Answer:
it would be the nose
Explanation: