Answer:
At temperatures below 924.93K.
Explanation:
Hello there!
In this case, according to the thermodynamic definition of the Gibbs free energy of reaction:
[tex]\Delta G=\Delta H-T\Delta S[/tex]
Now, for us to determine the correct temperature range, we must make ΔG=0 and solve for T:
[tex]T=\frac{\Delta H}{\Delta S} =\frac{-75kJ/mol}{-0.081kJ/mol-K}\\\\T=925.93K[/tex]
Thus at temperatures below 925.93 K we will have an spontaneous reaction (ΔG<0).
Regards!
start with 3 breads and 2cheese. how many products are made? and what are the leftovers?
Bacteria and mold break down fallen leaves on the forest floor. When they do
this, they release carbon dioxide into the atmosphere and ntrogen to the
soil. Which of the following roles do bacteria and mold have in the
environment?
Answer:
H
Explanation:
not sure tho sorry if I'm wrong
What percentage of the total atomic mass of magnesium bromide (MgBr2) is composed of bromine? Hint - consider the mass of both atoms of bromine in your calculation. A.43% B.87% C.13% D.63%
Answer:
B. 87%
Explanation:
First, we calculate the molecular mass of magnesium bromide (MgBr2) as follows;
MgBr2 = 24.3 + 79.9(2)
= 184.1g/mol
Since 1 atom of bromine contains 79.9g, then the mass of two atoms of bromine (Br2) is 79.9 × 2 = 159.8g
Hence, the percentage of bromine (Br2) in MgBr2 is calculated as follows:
% mass of Br2 = mass of Br2/ molecular mass of MgBr2 × 100
% mass of bromine = 159.8/184.1 × 100
% mass of bromine = 0.8680 × 100
% mass of bromine = 86.8%
Approximately, % mass of bromine is 87%
Wha is the molecular formula ?
[tex]NONSENSE=REPORTED[/tex]
A molecular formula consists of the chemical symbols for the constituent elements followed by numeric subscripts describing the number of atoms of each element present in the molecule. The molecular formula for a compound can be the same as or a multiple of the compound's empirical formula.
I hope it seemed helpful to you!
Answer:
Molecular formulas describe the exact number and type of atoms in a single molecule of a compound. The constituent elements are represented by their chemical symbols, and the number of atoms of each element present in each molecule is shown as a subscript following that element’s symbol. The molecular formula expresses information about the proportions of atoms that constitute a particular chemical compound, using a single line of chemical element symbols and numbers. Sometimes it also includes other symbols, such as parentheses, dashes, brackets, and plus (+) and minus (–) signs.
Hope it's helpfulThe table below gives some characteristics of element Y
what is the identity of Y
Answer:
I doint understand that question resend it again
An inflated balloon contains X air molecules.After some time the volume of the balloon is found to be the half at the same temperature and pressure when a few air molecules are expelled out. a)How many molecules will be there in the balloon now? b) Which is the gas law associated with this?
Answer:
See explanation
Explanation:
According to Avogadro's law, the volume of a given mass of gas is directly proportional to the number of molecules of gas present at constant temperature and pressure.
Hence; V1/n1 = V2/n2
The implication of this is, if there were X molecules present and the volume of the balloon is halved, the number of molecules of gas present is also halved. So, we now have X/2 number of gas molecules present in the balloon.
This is in accordance with the statement of Avogadro's law.
sodium chloride (NaCl) is an ionic compound that we consume everyday as a table salt,
what is the reason that the structure of the ionic compound causes the compound to be hard
and shiny? *
Answer:
See Explanation
Explanation:
Ionic compounds are composed of crystals. The crystal structure of an ionic compound is responsible for its hardness.
A crystalline solid contains a well organized structure which enables it to be hard and have a particular geometric shape as well defined melting point.
Hence, all the observed characteristics of NaCl are the result of its crystalline structure.
types of radioactive nuclide
Answer:
On Earth, naturally occurring radionuclides fall into three categories: primordial radionuclides, secondary radionuclides, and cosmogenic radionuclides. Radionuclides are produced in stellar nucleosynthesis and supernova explosions along with stable nuclides.
Which characteristic of water allows its molecules to form hydrogen bonds? (1 point)
Answer:
Water molecule is polar.
Explanation:
The partial negative charge on the O of one molecule can form a hydrogen bond with the partial positive charge on the hydrogens of other molecules.
Which of the following characteristics of the Earth are essential to the existence of life?
Characteristics 2 and 4
⊝
Characteristics 1, 2, and 4
⊝
Characteristics 2, 4, and 5
⊝
Characteristics 1 and 3
i need to know ASAP
the answer is 2 and 4 earth's atmosphere containing oxygen and nitrogen is essential for life and the surface temperature is also essential
What happens in nuclear fusion?
A. Isotopes are made from gamma rays.
B. Two separate nuclei form one nucleus.
C. Missing mass is added back to a nucleus.
D. Nuclei spontaneously break down.
Calcular el porcentaje de cada elemento en los compuestos químicos dados.
1. KNO3 (Nitrato de potasio: fertilizante): %K=? , %N=? , %O=?
Answer:
%K=38,6% %N=13,86% %O=47,54%
Explanation:
%K=M K/M KNO3
=39/101
=38,6%
%N=14/101
=13.86%
%O=100%-%K-%N
=100-38,6-13,86
=47,54%
Calculate the atomic mass of Nitrogen if the two common isotopes of Nitrogen have masses of 31.972 amu (85.00 % abundance) and 33.96
amu (15.00% abundance)
Explanation:
hope the picture helps you to understand:)
Charles's law describes the relationship of the volume and temperature of
gas at a constant mass and pressure. According to this law, what would
happen to the temperature of the gas if its volume decreased from 1.0 L to
0.50 L?
O A. The temperature would decrease by 500 K.
O B. The temperature would double.
O C. The temperature would be reduced by half.
O D. The temperature would increase from 500 K to 1000 K.
Answer:
The temperature would be reduced by half
Explanation:
Charles' Law => V ∝ T => V = kT => k = V/T
For two sets of T vs V conditions, the system constant (k) remains unchanged and k₁ = k₂ => V₁/T₁ = V₂/T₂.
Therefore, if V₁ is reduced to 1/2V₁ = V₂ => V₁/T₁ = 1/2V₁/T₂ => V₁/T₁ = V₁/2T₂
and solving for T₂ => 1/T₁ = 1/2T₂ => 2T₂ = T₁ => T₂ = 1/2T₁
∴ The initial temperature (T₁) would be reduced by half or, T₂ = 1/2T₁
Is hand washing a chemicals change or physicals change and why?
Answer:
If you wash your hands with soap, the soap molecules act as a link between the water you're washing with and the oil on your skin.
Explanation:
The temperature of a sample of liquid water changes from 50°C to 30°C. Which statement best explains the change that must happen at the molecular level? O The molecules move more quickly and their average kinetic energy increases. O The molecules move more slowly and their average kinetic energy decreases O The molecules move more quickly and their average kinetic energy decreases. O The molecules move more slowly and their average kinetic energy increases.
Explanation:
The molecules move more slowly and their average kinetic energy decreases
The molecules move more slowly and their average kinetic energy decreases. Hence, option B is correct.
What is the molecular level?On the molecular level, the individual chemical bonds in the substance are not altered; hence, a phase change is not a chemical reaction.
At the molecular level, the temperature is related to the random motions of the particles (atoms and molecules) in matter.
Because there are different types of motion, the particles' kinetic energy (energy of motion) can take different forms, and each form contributes to the total kinetic energy of the particles.
Hence, option B is correct.
Learn more about the molecular level here:
https://brainly.com/question/2449642
#SPJ2
A stretched spring has an elastic potential energy of 35 J when it is stretched 0.54 m. What is the spring constant of the spring? Round your answer to two significant figures.
StartFraction N over m EndFraction
Answer:
240 N/m
Explanation:
Using the formula as follows:
U = ½kx²
Where;
U = elastic potential energy (J)
K = spring constant (N/m)
x = stretched displacement (m)
According to the information provided in this question,
U = 35J
x = 0.54m
k = ?
U = ½kx²
35 = ½ × k × 0.54²
35 = ½ × k × 0.2916
35 = 0.2916k/2
70 = 0.2916k
k = 70 ÷ 0.2916
k = 240.05
To 2s.f, the spring constant (k) = 240 N/m.
Answer: 240
Explanation:
True or False: Electrons are significantly smaller than protons and neutrons, we can ignore electrons when we consider the physical property of an atom.
Answer:
true
Explanation:
PLEASE ANSWER I RLLY NEED IT
Galaxy #9
To which category does galaxy #9 belong? Why does it belong in this category?
What is the total mass of a 10 gram sample of 42K that will
remain unchanged after 12.4 hours?
A 2.5 g
B 5.0g
C 7.5 g
D 10 g
What is pOH? ?
A. pOH = Iog[ΟΗ]
Ο Ο Ο
Β. pH = Iog[Η]
Ο C. pH = Iog[ΟΗ]
D. pOH = [Η
(OH)
Identify one natural process that may cause sudden climate changes.
Answer:
Global Warming , Volcanic Eruption
I need help with both of the questions fast plz!!!
Answer: SMALLEST is lithium
LARGEST is Fluorine
Explanation:
If 81g of water is measured out, how many moles are in the sample? *
A. 4
B. 5
C. 2.5
D. 4.5
Answer:
D
Explanation:
because moles = mass /mr
so 81/18(mr of H2O=2+16)
moles =4.5
hope this helps:)
Calculate the molality of a solution that contains 51.2 g of naphthalene, C10H8, in 500 mL of carbon tetrachloride. The density of CCl4 is 1.60 g/mL.
Answer: The molality of naphthalene solution is 0.499 m
Explanation:
Density is defined as the ratio of mass and volume of a substance.
[tex]\text{Density}=\frac{\text{Mass}}{\text{Volume}} [/tex] ......(1)
Given values:
Volume of carbon tetrachloride = 500 mL
Density of carbon tetrachloride = 1.60 g/mL
Putting values in equation 1, we get:
[tex]\text{Mass of carbon tetrachloride}=(1.60g/mL\times 500mL)=800g[/tex]
Molality is defined as the amount of solute expressed in the number of moles present per kilogram of solvent. The units of molarity are mol/kg. The formula used to calculate molarity:
[tex]\text{Molality of solution}=\frac{\text{Given mass of solute}\times 1000}{\text{Molar mass of solute}\times \text{Mass of solvent (in g)}}[/tex] .....(2)
Given values:
Given mass of naphthalene = 51.2 g
Molar mass of naphthalene = 128.17 g/mol
Mass of solvent = 800 g
Putting values in equation 2, we get:
[tex]\text{Molality of naphthalene}=\frac{51.2\times 1000}{128.17\times 800}\\\\\text{Molality of naphthalene}=0.499m[/tex]
Hence, the molality of naphthalene solution is 0.499 m
current electricity occurs naturally(true or false)
Answer:
True
Explanation:
Which element would release the most energy while adding an electron to a neutral atom in the gas phase?
Answer:
bromine (br)
Explanation:
edg 2021
please can someone solve this problem it's urgent
What is the number of carbon atoms in a cycloalkyne with 8 hydrogen atoms
Answer:
4
Explanation:
C4H8
PLEASE ANSWER!! NEED THIS BY TOMORROW!! WILL GIVE LOTS OF POINTS!! NO LINKS OR RANDOM RESPONSES, will report!
what is the Net ionic and spectaror ions of
Pb(NO3)2 (aq) + 2 KCl (aq) PbCl; (s) + KNO, (aq)?
Explanation:
i colour code it so hopefully it make sense:)