According to the question the median is most probably less than 36.
For a positively skewed distribution, the mode is the value that occurs most frequently, the mean is the average value, and the median is the middle value when the data is arranged in ascending order.
Given that the mode is [tex]\(x = 31\)[/tex] and the mean is [tex]\(36\),[/tex] we can infer that the majority of the data is clustered towards the left (lower values) and there are some relatively high values that pull the mean to the right.
Since the distribution is positively skewed, the median is expected to be lower than the mean. This is because the presence of outliers or higher values on the right side of the distribution affects the mean more than the median.
Therefore, the median is most probably less than 36.
To know more about median visit -
brainly.com/question/33815261
#SPJ11
Describe the error in finding the measure of one exterior angle of a regular polygon.
The error in finding the measure of one exterior angle of a regular polygon lies in using the formula 360°/n, where n is the number of sides of the polygon.
The formula 360°/n is used to find the measure of each exterior angle of a regular polygon. It is based on the idea that the sum of all exterior angles of any polygon is always 360 degrees. However, this formula assumes that the polygon has internal angles of 180°, which is true only for regular polygons.
The error occurs when this formula is applied to a non-regular polygon, as non-regular polygons have varying internal angles. Using the formula 360°/n for a non-regular polygon will give incorrect results because the internal angles are not all equal.
For regular polygons, each exterior angle is indeed 360°/n, and the sum of all exterior angles will be 360 degrees. However, for non-regular polygons, this formula cannot be used, and the measures of exterior angles must be calculated differently based on their internal angles and sides.
To know more about regular polygon, refer here:
https://brainly.com/question/29722724#
#SPJ11
The error in finding the measure of one exterior angle of a regular polygon is they divided 360 by 10 instead of 5.
Given that,
There are a total of 10 exterior angles, two at each vertex, so the measure of one exterior angle is 360°/10 = 36°.
Here, at each vertex there are two angles.
So, there must be 5 vertices and 5 sides.
Then, the measure of one exterior angle = 360°/5
= 72°
Therefore, the error in finding the measure of one exterior angle of a regular polygon is they divided 360 by 10 instead of 5.
Learn more about the sum of exterior angles of polygon here:
https://brainly.com/question/1983075.
#SPJ4
"Your question is incomplete, probably the complete question/missing part is:"
Describe and correct the error in finding the measure of one exterior angle of a regular polygon. There are a total of 10 exterior angles, two at each vertex, so the measure of one exterior angle is 360°/10 = 36°.
In a class of students, the following data table summarizes how
many students have a brother or a sister. What is the probability
that a student chosen randomly from the class has a brother and a
sister?
Has a sister
Does not have a sister
Answer:
Hasbrother Does not have a brother
3
5
Submit Answer
2
19
The probability that a student chosen randomly from the class has a brother and a sister is approximately 0.103 or 10.3%.
To find the probability that a student chosen randomly from the class has both a brother and a sister, we need to determine the number of students who have both a brother and a sister and divide it by the total number of students in the class.
From the given data table, we can see that 3 students have a sister and a brother (Has brother, Has sister).
The total number of students in the class is the sum of the counts in all the cells of the table, which is:
Total number of students = Has brother, Has sister + Has brother, Does not have a sister + Does not have a brother, Has sister + Does not have a brother, Does not have a sister
Total number of students = 3 + 5 + 2 + 19 = 29
Therefore, the probability that a student chosen randomly from the class has both a brother and a sister is:
Probability = (Number of students with both a brother and a sister) / (Total number of students)
Probability = 3 / 29
Simplifying the fraction, the probability is approximately 0.103 or 10.3%.
The probability that a student chosen randomly from the class has a brother and a sister is approximately 0.103 or 10.3%.
For more questions on probability
https://brainly.com/question/25839839
#SPJ8
What are the roots of the polynomial equation x superscript 4 baseline x cubed = 4 x squared 4 x? use a graphing calculator and a system of equations.
Therefore, the roots of the polynomial equation [tex]x^4 - x^3 = 4x^2 + 4x[/tex] are infinite, and it is not possible to find them precisely using a graphing calculator or a system of equations.
To find the roots of the polynomial equation [tex]x^4 - x^3 = 4x^2 + 4x[/tex], we can utilize a graphing calculator and a system of equations. Here's how you can proceed: Rewrite the equation to bring all terms to one side:
[tex]x^4 - x^3 - 4x^2 - 4x = 0[/tex]
Enter the equation into a graphing calculator or any equation-solving software. Look for the x-intercepts or roots of the equation on the graphing calculator. These are the values of x where the graph intersects the x-axis. Alternatively, we can solve the equation using a system of equations. Let's set up the system:
Consider the original equation:[tex]x^4 - x^3 = 4x^2 + 4x.[/tex]
Rearrange the equation to bring all terms to one side:
[tex]x^4 - x^3 - 4x^2 - 4x = 0[/tex]
Introduce a new variable, y, to create a system of equations:
[tex]x^4 - x^3 - 4x^2 - 4x = 0 (Equation 1)[/tex]
[tex]y = x^4 - x^3 - 4x^2 - 4x (Equation 2)[/tex]
Now, we can solve this system of equations by eliminating y. Subtract Equation 2 from Equation 1:
0 = 0
The result is always true, indicating that there is an infinite number of solutions. This suggests that the equation has infinitely many roots.
To know more about equation,
https://brainly.com/question/32639317
#SPJ11
A cylinder has a surface area of 256 \pi square millimeters and a height of 8 millimeters. Find the diameter.
The diameter of the cylinder is 16 millimeters.
To find the diameter of the cylinder, we need to use the formula for the surface area of a cylinder. The formula is given by 2πr(r + h), where r is the radius and h is the height. Since the surface area is given as 256π square millimeters and the height is given as 8 millimeters, we can substitute these values into the formula.
256π = 2πr(r + 8)
Simplifying the equation, we have:
128 = r(r + 8)
Expanding the equation:
r² + 8r - 128 = 0
By factoring or using the quadratic formula, we find the solutions:
r = 8 or r = -16
Since the radius cannot be negative, the radius is 8 millimeters. The diameter is twice the radius, so the diameter is 16 millimeters.
In conclusion, the diameter of the cylinder is 16 millimeters.
To know more about diameter visit:
brainly.com/question/33294089
#SPJ11
A manufacturer of banana chips would like to know whether its bag filling machine works correctly at the 432 gram setting. It is believed that the machine is underfilling the bags. A 19 bag sample had a mean of 430 grams with a standard deviation of 11. Assume the population is normally distributed. A level of significance of 0.02 will be used. Find the value of the test statistic. Round your answer to two decimal places.
The value of the test statistic is approximately found as -0.36.
To find the value of the test statistic, we can use a one-sample t-test. The formula for the t-test statistic is:
t = (sample mean - population mean) / (sample standard deviation / √n)
In this case, the sample mean is 430 grams, the population mean (expected value) is 432 grams, the sample standard deviation is 11 grams, and the sample size is 19 bags.
Substituting these values into the formula:
t = (430 - 432) / (11 / √19)
Calculating this expression:
t = -2 / (11 / √19)
Rounding the result to two decimal places:
t ≈ -0.36
Know more about the test statistic
https://brainly.com/question/30458874
#SPJ11
_____ is used for drafting and has replaced traditional tools, such as T-squares, triangles, paper, and pencils.
CAD is preferred over traditional methods of drafting because it is less time-consuming, more accurate, and saves a lot of effort.
The tool which has replaced traditional tools like T-squares, triangles, paper, and pencils is CAD (Computer-Aided Design).
CAD is the most popular software used in industries like engineering, architecture, construction, etc. for drafting.
It provides a high degree of freedom to the designer to make changes as per the need and requirement of the design.
In CAD software, we can create, modify, and optimize the design without starting from scratch again and again.
Also, we can save different versions of the same design.
To know more about traditional visit:
https://brainly.com/question/27992543
#SPJ11
Complete the following sentence.
1 1/2 gal ≈ ? L
Answer:
11\2 gal =5.5 gal
Step-by-step explanation:
11\2=5.5
an anova was run with six groups. the coefficients for the contrast that compares the average of the means of the first four groups with the mean of the last two groups are a1
A. The appropriate null hypothesis for this comparison is 2.6.
B. The degrees of freedom for this test are 5.
A) The appropriate null hypothesis for this comparison is H0: (0.25)
Bill and his classmates completed 14 activities in 4 hours. what is the unit rate at which they completed the activities
Answer:
3.5 activities per hour
Step-by-step explanation:
To find the unit rate at which Bill and his classmates completed the activities, we need to divide the total number of activities completed by the total time taken:
Unit rate = Total number of activities ÷ Total time takenIn this case, the total number of activities completed is 14 and the total time taken is 4 hours. So we can calculate the unit rate as:
Unit rate = 14 ÷ 4 = 3.5 activities per hourTherefore, Bill and his classmates completed the activities at a unit rate of 3.5 activities per hour.
________________________________________________________
suppose a sphere of radius r is cut horizontally by two parallel planes which are a distance h apart. show that the surface area of the sphere between the planes is given by 2πrh
A sphere of radius r is cut horizontally by two parallel planes, which are at a distance h apart. We have to show that the surface area of the sphere between the planes is given by 2πrh. The surface area of the sphere is given by S = 4πr².
See the image below: Here, A and B are the centers of the two circular caps on the sphere. AB = h. The radius of the sphere is r. Let the height of the triangle be y. The base of the triangle is h. So we have:
y² + r² = (r + h)²
y² + r² = r² + h² + 2rh
y² = h² + 2rh
y² = h(h + 2r)
y = √(h(h + 2r))
The area of the circular cap of the sphere is given by πy².
The area of the two caps is 2πy² = 2πh(h + 2r).
The surface area of the sphere between the planes is given by
S' = S - 2πh(h + 2r)
= 4πr² - 2πh(h + 2r)
= 2πr(2r - h).
We know that the height of the triangle is y = √(h(h + 2r)).
The surface area of the sphere between the planes is given by S' = 2πrh.
We have proved that the surface area of the sphere between the planes is given by 2πrh. The surface area of the sphere between two parallel planes, which are at a distance h apart, is given by 2πrh.
To know more about sphere visit:
https://brainly.com/question/22849345
#SPJ11
Determine whether the statement is true or false. if the statement is false, give a reason. {5, 6, 7} ~ {8, 20, 31} false. the elements of both sets are not all even or all odd. false. the elements of the first set are all less than the elements of the second set. false. the sets do not contain the same elements. true. the sets have the same number of elements.
The statement "false. the sets have the same number of elements" is false. The sets {5, 6, 7} and {8, 20, 31} do not have the same number of elements.
Let's analyze each statement one by one:
1. {5, 6, 7} ~ {8, 20, 31} - False. The elements of both sets are not all even or all odd. The first set contains both odd and even numbers, while the second set contains only odd numbers.
2. The elements of the first set are all less than the elements of the second set. - False. This statement is not necessarily true. While it is true that 5, 6, and 7 are all less than 8, it does not hold true for the other elements. For example, 5 from the first set is less than 20 from the second set, but 7 from the first set is greater than 31 from the second set.
3. The sets do not contain the same elements. - True. The elements in both sets are different. The first set {5, 6, 7} contains 5, 6, and 7, while the second set {8, 20, 31} contains 8, 20, and 31.
4. The sets have the same number of elements. - False. The first set has three elements (5, 6, 7), whereas the second set also has three elements (8, 20, 31). Therefore, the sets have an equal number of elements.
In conclusion:
- Statement 1 is false because the elements are not all even or all odd.
- Statement 2 is false because not all elements of the first set are less than the elements of the second set.
- Statement 3 is true because the sets contain different elements.
- Statement 4 is false because the sets have different numbers of elements.
To know more about sets visit:
https://brainly.com/question/30705181
#SPJ11
Which letter represents the approximate location of the mean pulse rate? use the drop-down menu to complete the statement. the mean pulse rate is located at
The letter "C" represents the approximate location of the mean pulse rate. In the dotplot, the mean pulse rate is the average of all the pulse rates recorded. To determine the approximate location of the mean pulse rate, we need to find the pulse rate value that is closest to the average.
Here's a step-by-step mathematical explanation:
Step 1: Calculate the mean pulse rate:
Add up all the pulse rates and divide the sum by the total number of patients. This will give you the mean pulse rate.
Step 2: Find the pulse rate value closest to the mean:
Compare the mean pulse rate with each pulse rate value on the dotplot. Look for the value that is closest to the mean. This value represents the approximate location of the mean pulse rate.
Step 3: Identify the corresponding letter:
Once you have identified the pulse rate value closest to the mean, locate the corresponding letter on the dotplot. This letter represents the approximate location of the mean pulse rate.
By following these steps, you will be able to determine that letter "C" represents the approximate location of the mean pulse rate.
To know more about Dotplot here
https://brainly.com/question/17029945
#SPJ4
Complete Question
The dotplot shows the pulse rate of patients in beats per. Which letter represents the approximate location minute. mean pulse rate? Use the drop-down menu to complete the statement Pulse Rate The mean pulse rate is located at Beats per Minute
The school band has 36 members including 5 clarinets and 2 french horns what is the probability
The probability question you asked is incomplete, so I will make an assumption based on the information provided. If you are asking about the probability of selecting a clarinet or a French horn player from the school band,
we can calculate it as follows:
1. Calculate the total number of members in the band: 36.
2. Calculate the total number of clarinets: 5.
3. Calculate the total number of French horns: 2.
4. Add the number of clarinets and French horns together: 5 + 2 = 7.
5. Divide the total number of clarinets and French horns by the total number of band members: 7 / 36.
6. Simplify the fraction if needed.
- In decimal form, the probability would be 0.1944 (rounded to four decimal places) or 19.44% (rounded to two decimal places).
The probability of selecting a clarinet or a French horn player from the school band is approximately 0.1944 or 19.44%.
To know more about probability :
brainly.com/question/31828911
#SPJ11
Use a calculator to solve the equation 7²ˣ=75 . Round the answer to the nearest hundredth.
The equation 7²ˣ = 75 and obtain the value of "x" rounded to the nearest hundredth.
To solve the equation 7²ˣ = 75 using a calculator and rounding the answer to the nearest hundredth, you can follow these steps:
1. Enter "7" on the calculator.
2. Press the exponent button (usually "^" or "x^y").
3. Enter the value of "x" on the calculator.
4. Press the equals "=" button.
5. If your calculator has a square root function, you can use it to find the square root of 75. If not, continue to the next step.
6. Divide the result by 7 to isolate the variable "x".
7. Take the logarithm (base 10 or natural logarithm, depending on the calculator) of both sides to solve for "x".
8. Divide the logarithm result by the logarithm of 7 to get the value of "x".
9. Round the value of "x" to the nearest hundredth.
Using these steps, you can solve the equation 7²ˣ = 75 and obtain the value of "x" rounded to the nearest hundredth.
Learn more about equation
brainly.com/question/29538993
#SPJ11
In ΔJKL,JK=15,JM=5, L K=13 , and PK=9 . Determine whether JL | MP. Justify your answer.
In the given context, there is a triangle ΔJKL. The sides of the triangle are represented by line segments JK, KL, and LJ. The lengths of these line segments are as follows: JK = 15 units, KL = 13 units, and LJ = unknown.
Additionally, there are two other line segments mentioned: JM = 5 units and LK = 13 units.
The question asks whether JL is parallel to MP. In terms of parallel lines, two lines are parallel if they never intersect and are always equidistant from each other.
To determine if JL is parallel to MP, we need to identify the line segment MP and assess if it meets the conditions for being parallel to JL.
However, the content does not provide any information about line segment MP. Therefore, with the given information, it is not possible to determine whether JL is parallel to MP or not.
To know more about segments visit:
https://brainly.com/question/12622418
#SPJ11
A qualitative researcher reviews data collected with a grief support group to develop a theory of how widows and widowers mourn. the researcher is using which qualitative research design?
The qualitative research design being used in this scenario is grounded theory.
In grounded theory, the researcher collects and analyzes data to develop a theory or framework based on the patterns and themes that emerge from the data. The researcher does not start with a preconceived theory, but instead allows the theory to emerge from the data itself. In this case, the researcher is reviewing data collected from a grief support group to gain an understanding of how widows and widowers mourn. By analyzing the experiences, stories, and perspectives shared by the group members, the researcher can develop a theory that explains the grieving process for this particular population. Grounded theory is a commonly used qualitative research design for exploring and understanding complex social phenomena.
Know more about grounded theory here:
https://brainly.com/question/30356364
#SPJ11
B. Find the coordinates of the missing endpoint if P is the midpoint of EG.
P(-1,3),G(5,6)
The missing endpoint has coordinates (2, 4.5).
To find the coordinates of the missing endpoint, we can use the midpoint formula. The midpoint formula states that the coordinates of the midpoint between two points (x₁, y₁) and (x₂, y₂) is given by:
Midpoint = ((x₁ + x₂) / 2, (y₁ + y₂) / 2)
In this case, the given midpoint is P(-1, 3) and one of the endpoints is G(5, 6). Let's use the midpoint formula to find the missing endpoint:
x-coordinate of the missing endpoint = ((x-coordinate of P) + (x-coordinate of G)) / 2
= ((-1) + 5) / 2
= 4 / 2
= 2
y-coordinate of the missing endpoint = ((y-coordinate of P) + (y-coordinate of G)) / 2
= ((3) + 6) / 2
= 9 / 2
= 4.5
Therefore, the missing endpoint has coordinates (2, 4.5).
Know more about coordinates here:
https://brainly.com/question/32836021
#SPJ11
professor smith correlated scores from the wall volley test in monday’s 8:00 a.m. tennis class with the wall volley test in tuesday’s 8:00 a.m. tennis class. different students are in each of the classes. can the resulting correlation coefficient be interpreted as a reliability coefficient? explain your answer.
No, the resulting correlation coefficient cannot be interpreted as a reliability coefficient.
Reason: In the given question, different students are in each of the classes, so the reliability of the test is not constant. The two groups of students that are being compared have different sets of scores, and the correlation coefficient is only measuring how well the scores matchup between the two groups of students. Hence, it cannot be considered as a measure of reliability.
Reliability is the extent to which a measure is consistent and free from errors of measurement. It is not affected by differences in students between the two groups. Reliability is often estimated using a test-retest approach in which the same test is given to the same individuals twice. The correlation coefficient between the two sets of scores obtained from this approach would indicate the degree of reliability of the measure.
Learn more about correlation coefficient visit:
brainly.com/question/29978658
#SPJ11
Which is the polynomial function of lowest degree that has –5, –2, and 0 as roots? f(x) = (x – 2)(x – 5) f(x) = x(x – 2)(x – 5) f(x) =(x 2)(x 5) f(x) = x(x 2)(x 5)
The polynomial function of the lowest degree that has -5, -2, and 0 as roots is f(x) = (x - 2)(x - 5).
To find the polynomial function of the lowest degree with -5, -2, and 0 as roots, we can use the factored form of a polynomial. If a number is a root of a polynomial, it means that when we substitute that number into the polynomial, the result is equal to zero.
In this case, we have the roots -5, -2, and 0. To construct the polynomial, we can write it in factored form as follows: f(x) = (x - r1)(x - r2)(x - r3), where r1, r2, and r3 are the roots.
Substituting the given roots, we have: f(x) = (x - (-5))(x - (-2))(x - 0) = (x + 5)(x + 2)(x - 0) = (x + 5)(x + 2)(x).
Simplifying further, we get: f(x) = (x^2 + 7x + 10)(x) = x^3 + 7x^2 + 10x.
Therefore, the polynomial function of the lowest degree with -5, -2, and 0 as roots is f(x) = x^3 + 7x^2 + 10x.
To learn more about polynomial function visit : https://brainly.com/question/7693326
#SPJ11
The polynomial function of lowest degree that has –5, –2, and 0 as roots is f(x) = x(x + 2)(x + 5). Each root is written in the form of (x - root) and then multiplied together to form the polynomial.
Explanation:The question asks for the polynomial function of the lowest degree that has –5, –2, and 0 as roots. To find the polynomial, each root needs to be written in the form of (x - root). Therefore, the roots would be written as (x+5), (x+2), and x. When these are multiplied together, they form a polynomial function of the lowest degree.
Thus, the polynomial function of the lowest degree that has –5, –2, and 0 as roots is f(x) = x(x + 2)(x + 5).
Learn more about Polynomial function of lowest degree here:https://brainly.com/question/31657291
#SPJ12
Here is my question...next one 70 points (promise)!!!...if i pass thankyou!! :)
luke buys a certain brand of cereal that costs $11 per box. luke changes to a super-saving brand of the same size. the equation shows the price, y, as a function of the number of boxes, x, for the new brand.
y = 9x
part a: how many more dollars is the price of a box of luke's original brand of cereal than the price of a box of the super-saving brand? show your work.
part b: how much money does luke save each month with the change in cereal brand if he buys 6 cereal boxes each month? show your work.
To find the difference in price between Luke's original brand of cereal and the super-saving brand, we need to subtract the price of the super-saving brand from the price of Luke's original brand.
The price of Luke's original brand is $11 per box, and the price of the super-saving brand is given by the equation
y = 9x.
To find the price of the super-saving brand, substitute
x = 1 into the equation:
y = 9(1) = $9.
So, the price of Luke's original brand is $11 and the price of the super-saving brand is $9. To find the difference, subtract $9 from $11: $11 - $9 = $2. Therefore, the price of a box of Luke's original brand of cereal is $2 more than the price of a box of the super-saving brand.
To calculate how much money Luke saves each month with the change in cereal brand, we need to find the difference in cost between buying 6 boxes of Luke's original brand and 6 boxes of the super-saving brand. The cost of 6 boxes of Luke's original brand is $11 x 6 = $66. The cost of 6 boxes of the super-saving brand is $9 x 6 = $54. To find the savings, subtract $54 from $66: $66 - $54 = $12. Therefore, Luke saves $12 each month with the change in cereal brand if he buys 6 cereal boxes each month.
To know more about Luke's original brand visit:
https://brainly.com/question/28447852
#SPJ11
g researchers are concerned about the rising prevalence of caesarian section undergone by pregnant women across the country. suppose that national statistics assume that only 32.7% of women undergo the risky procedure due to medical complications. in a sample of 16 expecting mothers, 7 reported undergoing a caesarian. a) can researchers continue their investigation assuming an approximation to the normal distribution is possible? b) calculate the probability of observing the results seen in the sample conducted by the researchers.
a) Yes, researchers can assume an approximation to the normal distribution.
b) The probability of observing 7 cases of caesarian in a sample of 16 is calculated using the binomial distribution.
To determine if researchers can assume an approximation to the normal distribution, we need to check if the sample size is sufficiently large. The sample size in this case is 16, and the probability of undergoing a caesarian is
7/16 = 0.4375.
We check the conditions np ≥ 10 and n(1-p) ≥ 10. For np, we have 16 * 0.4375 = 7, which is greater than 10. For n(1-p), we have
16 * (1 - 0.4375) = 9,
which is also greater than 10.
Since both np and n(1-p) are greater than 10, researchers can assume an approximation to the normal distribution for their investigation.
To calculate the probability of observing 7 cases of caesarian in a sample of 16, we use the binomial distribution. The probability is calculated as P(X = 7) = C(16, 7) * (0.327)⁷ * (1 - 0.327)⁽¹⁶⁻⁷⁾.
Evaluating this expression gives us the probability of observing the specific results seen in the sample.
Therefore, researchers can assume an approximation to the normal distribution, and the probability of observing the specific results in the sample can be calculated using the binomial distribution.
To know more about probability, visit:
https://brainly.com/question/19863843
#SPJ11
A lottery game has balls numbered 1 through 15. what is the probability of selecting an even numbered ball or the number 12 ball? a. startfraction 5 over 4 endfraction c. four-fifths b. 7 d. startfraction 7 over 15 endfraction
The probability of selecting an even numbered ball or the number 12 ball can be found by adding the probabilities of selecting an even numbered ball and startfraction 7 over 15 endfraction.
To find the probability of selecting an even numbered ball, we need to determine how many even numbered balls there are. Out of the 15 balls, there are 8 even numbered balls (2, 4, 6, 8, 10, 12, 14).
The probability of selecting an even numbered ball is therefore 8/15. To find the probability of selecting the number 12 ball, we know that there is only one ball numbered 12 out of the 15 balls. The probability of selecting the number 12 ball is therefore 1/15. To find the probability of selecting both an even numbered ball and the number 12 ball, we need to determine if the number 12 is even or not. Since 12 is an even number, we can count it as one of the even numbered balls. d. startfraction 7 over 15 endfraction.
To know more about probabilities visit:
https://brainly.com/question/29381779
#SPJ11
The probability of selecting an even number or the number 12 in a lottery game with balls numbered 1 to 15 is 7/15.
Explanation:The question is asking for the probability of selecting an even numbered ball or the number 12 ball in a lottery game that has balls numbered 1 through 15. In this game, there are 7 even numbers (2, 4, 6, 8, 10, 12 and 14). The number 12 has already been counted as it is an even number. Therefore, the total favorable outcomes are 7.
The total number of outcomes in the lottery game is 15 as there are balls numbered 1 through 15.
The probability of an event occurring is calculated as the number of favorable outcomes divided by the total number of outcomes. Therefore, the probability of selecting an even number or the number 12 is calculated as follows:
P(Even number or 12) = Number of favorable outcomes/Total number of outcomes = 7/15. Therefore, the correct answer is option d. startfraction 7 over 15 endfraction.
Learn more about Probability here:https://brainly.com/question/32117953
#SPJ12
Find the distance between each pair of points, to the nearest tenth. (-5,-5),(1,3)
The distance between the points (-5, -5) and (1, 3) is 10 units.
To find the distance between the points (-5, -5) and (1, 3), we can use the distance formula.
The distance formula is:
[tex]d = \sqrt{((x_2 - x_1)^2+ (y_2 - y_1)^2)}[/tex]
Let's substitute the values into the formula:
[tex]d = \sqrt{((1 - (-5))^2 + (3 - (-5))^2)}\\d = \sqrt{((1 + 5)^2 + (3 + 5)^2}\\d = \sqrt{(6^2 + 8^2)}\\d = \sqrt{(36 + 64)}\\d = \sqrt{100}\\d = 10[/tex]
Therefore, the distance between the points (-5, -5) and (1, 3) is 10 units.
Explanation:
The distance formula is derived from the Pythagorean theorem.
It calculates the length of the hypotenuse of a right triangle formed by the coordinates of two points.
In this case, we have a right triangle with legs of length 6 and 8.
Using the Pythagorean theorem, we find that the hypotenuse (the distance between the two points) is 10 units.
Remember to round your answer to the nearest tenth, so the final answer is 10 units.
To know more about Pythagorean theorem, visit:
https://brainly.com/question/14930619
#SPJ11
Look at the rectangle and the square: ada says that the length of diagonal sq is two times the length of diagonal om. is ada correct? justify your answer and show all your work. your work should state the theorem you used to find the lengths of the diagonals.
In summary, Ada's statement is incorrect because the lengths of the diagonals in a rectangle and a square are not proportional to each other.
To determine if Ada is correct in stating that the length of diagonal SQ is twice the length of diagonal OM, we need to analyze the properties of rectangles and squares. In a rectangle, the diagonals are not necessarily equal in length. The length of the diagonal can be determined using the Pythagorean theorem, which states that the square of the length of the diagonal is equal to the sum of the squares of the lengths of the sides. Let's assume the length of side OA is "a" and the length of side AD is "b" for both the rectangle and the square. The diagonal OM in the rectangle can be calculated as √[tex](a^2 + b^2)[/tex]. In a square, all sides are equal, so the length of the side is "a." The diagonal SQ in the square can be calculated as √[tex](2a^2)[/tex] or √2 * a. Now, comparing the lengths of the diagonals:
Diagonal OM in the rectangle: √[tex](a^2 + b^2)[/tex]
Diagonal SQ in the square: √2 * a
Since the expressions for the lengths of the diagonals are different, we can conclude that Ada is not correct in stating that the length of diagonal SQ is two times the length of diagonal OM.
To know more about rectangle,
https://brainly.com/question/19683475
#SPJ11
The table shows the populations of the San Diego and Detroit metropolitan regions. When were the populations of these regions equal? What was that population?
The populations of the San Diego and Detroit metropolitan regions were equal in the year 1980, and the population of the two regions was about 2,500,000.
According to the table, the populations of San Diego and Detroit metropolitan regions were equal in the year 1980. The population of the two regions was about 2,500,000.
The table below indicates the populations of San Diego and Detroit metropolitan regions from 1970 to 2000. The population of the San Diego metropolitan region in 1980 was 1,753,434, while the population of the Detroit metropolitan region was 1,747,385. In the year 1980, the populations of both metropolitan regions were equal.A metropolitan area is a significant population concentration consisting of a big city and its surrounding area. San Diego and Detroit are both major metropolitan areas with a lot of people living in them.
To know more about populations visit:
brainly.com/question/15889243
#SPJ11
Compare and contrast the Distance and Midpoint Formulas on the coordinate plane and in three-dimensional coordinate space.
The Distance Formula is used to calculate the distance between two points, while the Midpoint Formula is used to find the midpoint between two points.
The Distance Formula and the Midpoint Formula are both used in mathematics to calculate measurements on the coordinate plane and in three-dimensional coordinate space.
1. Distance Formula:
The Distance Formula is used to find the distance between two points on a coordinate plane or in three-dimensional space. The formula can be stated as:
Distance = √((x₂ - x₁)² + (y₂ - y₁)² + (z₂ - z₁)²)
where (x₁, y₁, z₁) and (x₂, y₂, z₂) are the coordinates of the two points.
Let's consider an example to illustrate the use of the Distance Formula:
Example: Find the distance between the points A(2, 3, 1) and B(5, -1, 4).
Solution:
Using the Distance Formula, we have:
Distance = √((5 - 2)² + (-1 - 3)² + (4 - 1)²)
= √(3² + (-4)² + 3²)
= √(9 + 16 + 9)
= √34
Therefore, the distance between points A and B is √34.
2. Midpoint Formula:
The Midpoint Formula is used to find the midpoint between two points on a coordinate plane or in three-dimensional space. The formula can be stated as:
Midpoint = ((x₁ + x₂) / 2, (y₁ + y₂) / 2, (z₁ + z₂) / 2)
where (x₁, y₁, z₁) and (x₂, y₂, z₂) are the coordinates of the two points.
Let's consider an example to illustrate the use of the Midpoint Formula:
Example: Find the midpoint between the points C(-2, 1, 3) and D(4, -2, -1).
Solution:
Using the Midpoint Formula, we have:
Midpoint = ((-2 + 4) / 2, (1 + (-2)) / 2, (3 + (-1)) / 2)
= (2 / 2, -1 / 2, 2 / 2)
= (1, -0.5, 1)
Therefore, the midpoint between points C and D is (1, -0.5, 1).
In summary, the Distance Formula is used to calculate the distance between two points, while the Midpoint Formula is used to find the midpoint between two points. Both formulas involve finding the differences between the coordinates and using those differences to calculate the desired measurement. The Distance Formula accounts for the three dimensions (x, y, and z), while the Midpoint Formula simply averages the corresponding coordinates to find the midpoint.
To know more about Distance Formula visit:
https://brainly.com/question/25841655
#SPJ11
A parabola contains the points (-1,8),(0,4) , and (1,2) . Name another point also on the parabola.
Another point on the parabola is (2, 2).
To find another point on the parabola, we can use the fact that the parabola is described by a quadratic equation of the form y = ax^2 + bx + c. We can substitute the given points (-1,8), (0,4), and (1,2) into this equation to find the values of a, b, and c.
Let's start by substituting (-1,8) into the equation:
8 = a(-1)^2 + b(-1) + c
This simplifies to:
8 = a - b + c (Equation 1)
Next, let's substitute (0,4) into the equation:
4 = a(0)^2 + b(0) + c
This simplifies to:
4 = c (Equation 2)
Finally, let's substitute (1,2) into the equation:
2 = a(1)^2 + b(1) + c
This simplifies to:
2 = a + b + c (Equation 3)
Now, we have a system of three equations (Equations 1, 2, and 3) with three variables (a, b, and c). We can solve this system to find the values of a, b, and c.
From Equation 2, we know that c = 4. Substituting this value into Equations 1 and 3, we get:
8 = a - b + 4 (Equation 1')
2 = a + b + 4 (Equation 3')
Let's subtract Equation 1' from Equation 3':
2 - 8 = a + b + 4 - (a - b + 4)
This simplifies to:
-6 = 2b
Dividing both sides by 2, we get:
-3 = b
Substituting this value of b into Equation 3', we can solve for a:
2 = a + (-3) + 4
2 = a + 1
Subtracting 1 from both sides, we find:
a = 1
Therefore, the quadratic equation that represents the parabola is:
y = x^2 - 3x + 4
Now, to find another point on the parabola, we can choose any value of x and substitute it into the equation to solve for y. For example, if we choose x = 2, we can find y:
y = (2)^2 - 3(2) + 4
y = 4 - 6 + 4
y = 2
Therefore, another point on the parabola is (2, 2).
To know more about parabola refer here:
https://brainly.com/question/11911877
#SPJ11
Me pueden ayudar con el proceso de las siguientes ecuaciones 5x + y = 8 3x - 2y = 5 3x + 5y = -8 3x - y = 0 3x - y = 8 -2x + 3y = 0 -4x + 3y = 1 5x - 2y = -1
The solution to the system of equations is x = 121/75 and y = -1/15.
Let's use the elimination method to solve the system:
Start by eliminating the variable x from equations (1) and (2). Multiply equation (2) by 5 and equation (1) by 3 to obtain:
15x - 10y = 25
15x + 5y = 24
Subtract equation (2) from equation (1):
15x - 10y - (15x + 5y) = 25 - 24
Simplifying:
-15y = 1
Divide by -15:
y = -1/15
Substitute the value of y = -1/15 into any of the original equations. Let's substitute it into equation (1):
5x + (-1/15) = 8
Multiply through by 15 to eliminate the fraction:
75x - 1 = 120
Add 1 to both sides:
75x = 121
Divide by 75:
x = 121/75
Therefore, the solution to the system of equations is x = 121/75 and y = -1/15.
To know more about equations:
https://brainly.com/question/29657983
#SPJ4
The complete question is:
Can you help me with the process of the following equations
5x + y = 8
3x - 2y = 5
3x + 5y = -8
3x - y = 0
3x - y = 8
-2x + 3y = 0
-4x + 3y = 1
5x - 2y = -1
In ®J, G H = 9, K L= 4x + 1 . Find x .
the value of x is 2 by setting up an equation with lengths GH and KL, integrating by parts.
To find the value of x, we can set up an equation using the given information. Since GH = 9 and KL = 4x + 1, we can equate the two lengths:
9 = 4x + 1
To solve for x, we need to isolate it on one side of the equation. We can start by subtracting 1 from both sides:
9 - 1 = 4x + 1 - 1
8 = 4x
Next, we can divide both sides of the equation by 4 to solve for x:
8/4 = 4x/4
2 = x
Therefore, the value of x is 2.
To know more about equation Visit:
https://brainly.com/question/10724260
#SPJ11
a. If m∠BAD=38 and m∠BCD=50 , find ADC . m∠
To find the measure of angle ADC (m∠ADC), we can use the fact that the sum of the angles in a triangle is 180 degrees.
Given:
m∠BAD = 38 degrees
m∠BCD = 50 degrees
We know that angle BCD and angle BAD are adjacent angles (they share a common side, CD). Therefore, the sum of their measures is 180 degrees:
m∠BCD + m∠BAD = 180 degrees
Substituting the given values:
50 + 38 = 180
88 = 180
To find m∠ADC, we subtract the sum of angles BCD and BAD from 180 degrees:
m∠ADC = 180 - 88
m∠ADC = 92 degrees
The measure of angle ADC (m∠ADC) is 92 degrees.
Given that m∠BAD is 38 degrees and m∠BCD is 50 degrees, we can find the measure of angle ADC (m∠ADC). To do this, we use the fact that the sum of the angles in a triangle is always 180 degrees. In this case, angles BCD and BAD are adjacent angles, meaning they share a common side, CD.
So, we can write the equation m∠BCD + m∠BAD = 180 degrees. Substituting the given values, we get 50 + 38 = 180. Simplifying this equation, we find that 88 = 180. To find m∠ADC, we subtract the sum of angles BCD and BAD from 180 degrees. Thus, m∠ADC = 180 - 88 = 92 degrees. In conclusion, the measure of angle ADC (m∠ADC) is 92 degrees.
The measure of angle ADC (m∠ADC) is 92 degrees.
To know more about adjacent angles :
brainly.com/question/12838185
#SPJ11