The wavelength of the light emitted for the orbital transition from n = 3 to n = 1 is 0.975m.
For hydrogen, the wavelength of the light emitted for the orbital transition of n = 3 to n = 1 is given by,
1/λ = R(1/n²-1/n'²)
Where,
R is the Rydberg's constant,
n is the initial orbital,
n' is the final orbital,
Putting values,
1/λ = 1.097(1/1-1/9)
1/λ= 1.097 x 8/9
λ = 0.975 m.
Hence, the wavelength of the light emitted is 0.975m.
To know more about Wavelength, visit,
https://brainly.com/question/10728818
#SPJ4
rank in order, from fastest to slowest, the speeds of the points labeled 1 through 5. rank items from fastest to slowest. to rank items as equivalent, overlap them.
Order from fastest to slowest
[tex]1\geq 2\geq 3\geq 4\geq 5[/tex]
Sort the items in order of speed. Overlap items to rank them equally.
The wheel in the is rolling to the right without slipping.
Rank in order, from fastest to slowest, the speeds of the points labaled 1 through 5.
Rank items from fastest to slowest. To rank items as equivalent, overlap them.
an sphere is pure rolling speed of context point 5 meet be zero w.r.t ground.
Hence, v-ωR=0
v=ωR
[tex]v_5_/_g\geq v_5_/_c+v_c_/_g...............(1)[/tex]
part.5
speed= 0 [tex]v_5=0[/tex]
part.2
[tex]v_2=\sqrt{v^2+v^2}[/tex]
[tex]= \sqrt{2} v[/tex]
=(1.414)v
part.3
[tex]v_3= \sqrt{v^2[/tex]ω[tex]^{2}[/tex][tex]R^2/4[/tex] = 1.118v
part. 1
[tex]v_1[/tex]=v+ωR
=2v
part. 4
[tex]v_4[/tex]=v
order from fastest to slowest
[tex]1\geq 2\geq 3\geq 4\geq 5[/tex]
To know more about speed here:
https://brainly.com/question/28224010
#SPJ4
how much electrical energy does a small heating coil use if it runs for 5 minutes using a 12 volt power supply that provides 2.5 amperes of current?
691.2 W electrical energy does a small heating coil use if it runs for 5 minutes using a 12-volt power supply that provides 2.5 amperes of current.
What is power?
Power refers to the rate at which a work is completed. It can also be defined as the total amount of energy expended in a given period of time. Power is measured in Watt (W).
What is energy?
It is the ability of a system to do work. It is measured Joule (J).
When the work done is said to be one joule?
Work done is said to be one joule when a 1 N of force is applied on an object, and the object moves by 1 m because of the force.
The formulae for power can be expressed as follows
P = [tex]V^{2}R[/tex]
R = [tex]\frac{V}{I}[/tex]
As per the question,
V = 12 V, I = 2.5 A
Therefore,
R = [tex]\frac{12}{2.5}[/tex] = 4.8
Now,
P = 12 x 12 x 4.8 = 691.2 W
To know more about Power visit:
https://brainly.com/question/27442707
#SPJ4
what is the lift (in newtons) due to bernoulli's principle on a wing of area 89 m2 if the air passes over the top and bottom surfaces at speeds of 260 m/s and 180 m/s , respectively?
Bernoulli's principle predicts that a wing with an area of 89 m² will experience a lift of 2020656 N when air moves over its top and bottom surface with velocities aircraft 260 m/s and 180 m/s, respectively.
Why is the Bernoulli principle crucial?Engineers can use Bernoulli's Principle to safely engineer the fluid flow within and around airplanes, engines, and healthcare delivery devices by making sense of a fluid dynamics phenomenon. Bernoulli's principle, a fundamental idea in fluid dynamics, connects a fluid's pressure to its speed.
Briefing:According to the Bernoulli's principle, the determined based expresses force:
[tex]P_{1} + \frac{1}{2}p(v_{1})^{2} = P_{2} + \frac{1}{2}p(v_{2})^{2}[/tex]
[tex]P_{1} - P_{2}[/tex] = (0.5) (1.29) (260)² - (0.5) (1.29) (180)²
P₁ - P₂ = 22704
F = PA = (22704) (89)
F = 2020656 N
A wingspan with either an area measuring 89 m² has a load of 2020656 N as a result.
To know more about Bernoulli's principle visit:
https://brainly.com/question/13098748
#SPJ4
what is the equilibrium temperature of this system? the average specific heat of aluminum over this temperature range is 653 j/(kg⋅k) .
The equilibrium temperature of this system is Zero.
Given,
[tex]m_{A}[/tex] = 150g
[tex]m_{w}[/tex] = 80
[tex]Q_{A}[/tex] = mcΔT = (0.15) (653) (0-(-196))
= 19198.2 J
Also, [tex]Q_{w}[/tex] = [tex]m_{w}[/tex] CΔT = (0.08) (4186) (14)
= 4688.32 J
So, all the water does not freezes
Therefore, [tex]t_{f}[/tex] = 0 C
What is equilibrium?
Equilibrium, in physics, the state of a system when neither the state of motion nor the state of internal energy tends to change over time. A simple mechanical body is in equilibrium when it experiences neither linear nor angular acceleration. This state will continue indefinitely unless disturbed by an external force. Equilibrium occurs for a single particle when the vector sum of all forces acting on the particle is zero. A rigid body (which by definition differs from a particle by its properties of extension) is in equilibrium when, in addition to the states listed above for particles, the vector sum of all torques acting on the body is equal to zero, Its state of rotational motion remains constant. An equilibrium is said to be stable when a small externally induced displacement from that state produces a force opposing the displacement tending to return the body or particle to the equilibrium state. Examples include weights suspended from springs or bricks placed on a flat surface. Equilibrium is unstable when small deviations produce forces that tend to increase the displacement. An example is the ball he bearing balanced on the edge of a razor.
To know more about equilibrium, check out:
https://brainly.in/question/220726
#SPJ4
A ball having mass M is struck by a bat having mass 9M. Compared to the magnitude of the force exerted by the bat on the ball, the magnitude of the force exerted by the ball on the bat is
The same
the amount of force the ball applies to the bat is very same.
What does force's magnitude mean?The numerical measure of a force's power is called its magnitude.For instance, let's say the force is 10 N in the direction of the east."towards east" denotes direction, while "10" denotes the force's magnitude. Magnitude is, in essence, the "value" or "amount" of any physical quantity.
How do I calculate magnitude?Given a location vector v=a,b, the magnitude is calculated using the
equivalent to the angle made with either the x- or y-axis.
To know more about magnitude visit:
https://brainly.com/question/14452091
#SPJ4
determine the radial component of the linear acceleration of a point on the edge of the wheel 2.0 s after it has started accelerating.
Assuming a constant angular acceleration, the linear acceleration of a point on the edge of the wheel 2.0 s after the wheel has started accelerating is equal to the angular acceleration multiplied by the radius of the wheel.
What is acceleration?
Acceleration was the last mathematical concept covered in Lesson 1. Acceleration is a frequently misunderstood concept that means something very different from what sports announcers or other people usually mean when they use it. Acceleration is described as follows: The rate that an object keeps changing its velocity is known as acceleration, a vector quantity. If an object's velocity is changing, it is accelerating. Sometimes when a person is moving quickly, sports announcers will say that the person is accelerating. But speed has nothing to with acceleration. Even when moving very quickly, a person may not be accelerating. Changing the speed at which an object is moving is what acceleration is all about.
Assuming a constant angular acceleration, the linear acceleration of a point on the edge of the wheel 2.0 s after the wheel has started accelerating is equal to the angular acceleration multiplied by the radius of the wheel.
Linear acceleration = Angular acceleration x Radius
Linear acceleration = (2π rad/s^2) x (1 meter)
Linear acceleration = 2π m/s^2
To learn more about acceleration
https://brainly.com/question/605631
#SPJ4
expressed in scientific notation, what is the supernova's distance in light-years? ly (f) now imagine that an interstellar dust cloud lies between us and sn 1994d. suppose that the peak apparent visual magnitude would have been 11.3 if the cloud were not absorbing some of its light. based on that unbiased value, what would the supernova's distance really be, in light-years? ly
The supernova is actually about 330 lightyears away.
Light 12 months, written instead of mild 12 months, is a gigantic unit of time used for certain astronomical distances, equivalent to about 9.46 trillion kilometers or 5.88 trillion miles.
A light year is a distance, not a time. This is the total distance a ray of light travels in a straight line in one year. Proxima Centauri is 4.2 light years away from Earth, a distance that would take about 6,300 years in the current generation. This kind of journey can span generations.
This duration is a big problem as it makes area exploration a very slow technique. I boarded the Gap Trip Discovery, which can travel at 5 miles per second, but it would take him about 37.2 centuries, or 12 months, to ride in a breezy year.
Learn more about light-years here:-https://brainly.com/question/87265
#SPJ4
What happens during the carbon fixation stage of the calvin cycle (light-indepedent reactions)?.
One of the Calvin cycle's three phases is carbon fixation. The inorganic carbon atom is incorporated into the organic molecule during this process.
Describe carbon fixation.Carbon fixation is the process by which living things absorb inorganic carbon from the atmosphere and transform it into organic molecules. Chemical energy is stored in these molecules. The sustainability of life depends on this process.
The Calvin cycle of photosynthesis has a step called carbon fixation. At this point, the enzyme rubisco was used to link RuBP to the inorganic carbon atom, which had been fixed into the organic molecule.
Three carbons are fixed in this process for each turn of the light independent cycle. In this process, 3 carbons fix for each turn during the light independent cycle. Every three-carbon fixation leads to 6 3-PGA in end.
Thus, the carbon fixation is the process of the incorporation of the carbon atom to organic molecules.
To know more about carbon fixation click the link:
brainly.com/question/1219446
#SPJ4
draw the process and control scheme for this system if a constraint controller is used, such that when the smaller of two parallel control valves reached 100%, then the controller output is routed
Technique controllers keep the output of manner variables together with temperature, pressure, glide, or stage within a pre-set variety.
Manner controllers maintain the output of machine variables together with temperature, strain, glide, or degree inner a pre-set variety. They use feedback from sensors to discover any deviation from a setpoint and automatically alter output until parameters are again inside variety.
The challenge of a constraint control scheme is to push a target variable as a ways as viable in the preferred course. With distinctive phrases, The purpose variable shall obtain is relying on the goal most or minimal rate without violating some other boundaries.
Constraints are used to restrict the form of data which can go right into a table. This guarantees the accuracy and reliability of the data inside the desk. If there can be any violation among the constraint and the facts motion, the movement is aborted. Constraints may be column degree or table stage.
Learn more about constraint controller here:- https://brainly.com/question/15102549
#SPJ4
1.
A larger number is 5 times a smaller number.
The smaller number is 11.
What is the difference between the two numbers?
Larger
Smaller
The difference between the two numbers is
The difference between the two numbers is 44, because a larger number is 5 times a smaller number, and a smaller number is 11.
What are numbers?
An arithmetic value used to indicate amount is called a number. A number is a mathematical concept that is used for counting, measuring, and labelling. Thus, mathematics is built on numbers.
What is the difference?
The outcome of a crucial mathematical operation is reached by taking two numbers away. It reveals how much one number deviates from another. Mathematical difference finding is used to determine how many numbers are between two supplied numbers.
Calculations:- Let, a larger number be = [tex]x[/tex]
Smaller number is = [tex]11[/tex] (given)
A larger number is 5[tex]x[/tex] = 11
A larger number is 55 (because of 5 times the smaller number).
Difference = 55-11 (larger number - smaller number) = 44.
The difference is 44.
To know more about Numbers, check out:
https://brainly.com/question/17200227
#SPJ9
where is the vast majority of mass in the solar system located? what object or objects account for most of this mass?
Since it comprises 99.85% of both the solar system's mass, the solar dominated the gravity influence of the solar system.
The 12 solar systems are what?The newest The Sun, our star, and everything gravitationally connected to it, including the planetary Mercury, Venus, Earth, Mars, Jupiter, Uranus, Saturn, as well as Neptune, dwarf planets like Pluto, dozens of moons, and thousands of asteroids, comets, and meteoroids, make up our solar system.
In the solar system, are there eight or nine planets?Our stellar system is made up of stars, 146 moons, countless comets, meteorites, and other space objects as well as ice on several dwarf planets, including Pluto. In the system, there is just the Sun. The eight planets are Mercury, Venus, Earth, Phobos, Jupiter, Saturn, Uranus, and Neptune. the separation between Mercury and the Sun. The furthest is Neptune.
To know more about solar system visit:
https://brainly.com/question/28447514
#SPJ4
the energy released by the sun is the result of a) natural radioactivity. d) photosynthesis. b) nuclear fusion. e) nuclear fission. c) combustion of hydrogen.
The energy released by the sun is the result of nuclear fusion.
Is the Sun nuclear fission or fusion?Helium is being created from hydrogen in the Sun's core. Nuclear fusion is the term for this. Each helium atom is created by the fusion of four hydrogen atoms. A portion of the mass is changed into energy during the process.The Sun is made up many layers, each with its own characteristics, that are around 75% hydrogen and 25% helium by mass. In a nutshell, the Sun is a huge ball of gas that is sufficiently hot to light at every level. The Sun's core, which is the region closest to its surface, has a temperature of around 15 million Kelvins, a density 150 times that of water, and a pressure more than 200 billion times greater than Earth's atmosphere.Learn more about nuclear fusion refer to :
https://brainly.com/question/1349098
#SPJ4
a car traveling at 15 m/s slams on its brakes and the wheels lock. the car comes to rest after skidding 20 m. determine how far the car would skid if the car had been traveling, instead, at 45 m/s.
The car will skid to a distance of 180 m.
How do you calculate skid distance?S = ~30d(I.O) (dry tar road) (dry tar road). The formula is S = 30d(0.5) for a wet tar road, where f is around 0.5. (wet tar road). speed in relation to how long the skid marks are.The route taken by a body to travel from a starting point to an ending point in a predetermined amount of time and at a predetermined speed is known as the distance travelled. Distance is equal to time times velocity if the velocity is constant. d = v*t.In other words, an automobile moving at 10 miles per hour may need to stop in 4 feet, while a car travelling at 20 miles per hour would need to stop in 16 feet, which is four times as far. The stopping distance is quadrupled for every speed increase.Find the attachment answer
Learn more about skid distance refer to :
https://brainly.com/question/17107316
#SPJ4
1. does the field [that is caused by a straight wire] have an axial component? does it have a radial component?
A straight wire's field only has an axile component, B parallel =l Δl Perpendicular length makes up the field's radial component.
The radial proportion of force is what?The tangential component of such net force may be specified as the proportion of the resultant force along the perpendicular at any point during circular motion, while the radial component may be specified as the part of the equilibrium position along the radius.
What does a vector's radial component mean?Any scalar v can be expressed in the form of its parts in the e r and e directions. Consequently, Thus v=v 1 e r+v 2 e θ, where v 1=v · e r and v 2=v · e θ.The radial component is represented by component v1, while the transverse component is represented by component v2.
To know more about the Radial Component Visit :
https://brainly.com/question/13885495
#SPJ4
match the type of electromagnetic radiation with the type of molecular motions or transitions that it causes. a) infrared rotational motion b) ultraviolet-visible light electronic transitions c) microwaves vibrational motion
a) Infrared - vibrational motion
b) Ultraviolet -electronic transitions
c) Microwaves - rotational motion
What are electromagnetic radiation?There are various types of electromagnetic radiation all around us, including radio waves, microwaves, X-rays, and gamma rays. The electromagnetic spectrum, which spans a wide range of wavelengths, includes visible light, which is also a type of electromagnetic energy.
In terms of reflection, refraction, diffraction, and interference, electromagnetic radiation shares characteristics with other types of waves. Additionally, its wavelength or the frequency with which it changes over time can be used to describe it. However, electromagnetic radiation also exhibits particle-like characteristics in addition to those connected to wave motion. It is quantized in that, at a particular frequency, its energy is represented by an integer multiplied by h, where h is the so-called Planck's constant, a basic constant of nature. A photon is an electromagnetic energy quantum. A stream of photons, with photon energy exactly proportional to frequency, can be thought of as electromagnetic radiation, including visible light.
To know more about electromagnetic radiation :
https://brainly.com/question/10759891
#SPJ4
I understand that the question you are looking for is:
Match the type of electromagnetic radiation with the type of molecular motions or transitions that it causes:
a) infrared -rotational motion
b) ultraviolet- electronic transitions
c) microwaves- vibrational motion
find the peak wavelength for radiation from (a) ice at 273 k, (b) a floodlamp at 3500 k, (c) outer-space at t
The peak wavelength for radiation from ice at 273 k is 1060 nm, a floodlamp at 3500 k is 828 nm, outer-space at t is [tex]10^{6}[/tex] nm.
Using displacement law, maximum wavelength is:
λ[tex]_{max}[/tex] = 2.898 × [tex]10^{3}[/tex] m.k / T
(a) (λ[tex]_{max}[/tex])[tex]_{ice}[/tex] = 1060 nm
(b) (λ[tex]_{max}[/tex])[tex]_{flood lamp}[/tex] = 828 nm
(c) (λ[tex]_{max}[/tex])[tex]_{outer space}[/tex] = [tex]10^{6}[/tex] nm
What is wavelength?
In physics, wavelength is the spatial period of a periodic wave, i.e. the distance over which the wave shape repeats. This is the distance between consecutive corresponding points of the same phase in the wave. A crest, trough, or zero-crossing of two adjacent waves, characteristic of both traveling and standing waves, and other spatial wave patterns. The reciprocal of wavelength is called spatial frequency. Wavelength is usually represented by the Greek letter lambda (λ). The term wavelength is also sometimes applied to the sinusoidal envelope of modulated waves and waves formed by interference of modulated waves or multiple sinusoids.
Assuming a sine wave traveling with constant wave velocity, the wavelength is inversely proportional to the frequency of the wave. Higher frequency waves have shorter wavelengths and lower frequency waves have longer wavelengths.
Therefore,
(a) (λ[tex]_{max}[/tex])[tex]_{ice}[/tex] = 1060 nm
(b) (λ[tex]_{max}[/tex])[tex]_{flood lamp}[/tex] = 828 nm
(c) (λ[tex]_{max}[/tex])[tex]_{outer space}[/tex] = [tex]10^{6}[/tex] nm
To know more about wavelength, check out:
https://brainly.com/question/10728818
#SPJ4
a boy stands in a large bucket used to lift humans to higher elevations. the combined weight of the boy and bucket is w. the bucket has a lightweight rope attached to its top and extending up and over a simple pulley that is attached to the ceiling high above the boy. the rope is long enough to come back down to his hands, as shown. as the boy pulls himself upward, he applies a force f to the rope. which of the following claims indicates a correct relationship between f and wand provides appropriate reasoning?
a. F W, because as the boy exerts a force downward on the rope, the tension in the rope pulls up on the boy. Plus, the boy must overcome the friction in the pulley.
F > W because as the boy exerts a force downward on the rope, the tension in the rope pulls up on the boy. Plus, the boy must overcome the friction in the pulley.
Solution:
m₁a + T₁ = W
Since the rope is continuous T₁ = F
m₁a + F = W
F = W - m₁a
Tension is defined as the force transmitted through a rope, cord, or wire when pulled by forces acting from opposite sides. Tension is transmitted along the length of the wire, drawing energy evenly into the bodies at both ends.
Pulling force is the force exerted on the body by a rope or cord. Ropes and cords cannot push your body. You must always draw the body. The pulling force is directed towards the rope or cord, away from the body being pulled.
Learn more about The rope here:- https://brainly.com/question/27816476
#SPJ4
juana accidentally touched a hot iron. she immediately drew back her hand. which of the following is true about the withdrawal of her hand?
It happened because of her nervous system, which was initiated in the spinal cord.
What is a Nervous system?
The body's primary communication, controlling, and governing system. The nervous system is in charge of controlling and upholding homeostasis, together with the endocrine system. This system helps us to maintain in touch with our environment, both internal and external, through its receptors. The brain, spinal cord, nerves, and ganglia are the main organs that make up the nervous system.
What is the Spinal cord?
The spinal cord, which connects the medulla oblongata in the brainstem to the lumbar portion of the vertebral column, is a long, thin, tubular tube consisting of nerve tissue. The cerebrospinal fluid-filled core canal of the spinal cord is enclosed by the backbone. The central nervous system is made up of the brain and spinal cord. In humans, the spinal cord starts at the base of the skull and travels via the foramen magnum before entering the spinal canal at the first cervical vertebra. Between the first and second lumbar vertebrae, the spinal cord comes to a stop.
Hence, it was initiated in the spinal cord.
To know more about the Nervous system, check out:
https://brainly.com/question/2114466
#SPJ4
a majority of the asteroids are in approximately in circular orbits in a belt between mars and jupiter. do they have the same orbital period about the sun
Majority of the asteroids are in approximately in circular orbits in a belt between mars and Jupiter have nearly same orbital period about the sun.
The "asteroid belt," a flat, doughnut-shaped feature that lies between Mars and Jupiter in roughly the same orbital plane, is where the majority of asteroids are found. Mars orbits the sun at a mean distance of 228 million kilometers, while Jupiter orbits at a mean distance of 778 million kilometers. The belt spans a distance of 329,12 million to 478,71 million kilometers from the sun and is approximately 150 million kilometers wide. To distinguish it from Trojan asteroids, near-Earth asteroids, and other similar objects, this is referred to as the "main belt."
The majority of the asteroids in the Main Belt are composed of rock and stone, but a small number of them also contain the metals nickel and iron. These materials are combined with carbon-rich materials to form the remaining asteroids. Some of the farther-away asteroids typically have higher ice content. There is evidence that some asteroids may contain water, despite the fact that they are not big enough to support an atmosphere.
To study more in detail about orbital period -
https://brainly.com/question/14494804
#SPJ4
A thermodynamic process occurs in which the entropy of a system changes by −8 j/k. According to the second law of thermodynamics, what can you conclude about the entropy change of the environment?.
A thermodynamic process occurs in which the entropy of a system changes by −8 j/k and according to the second law of thermodynamics, the change in entropy must be equal to +8 j/k .
Why is there a change in entropy ?According to second law of thermodynamics:
Entropy change of system = − Entropy change of environment
∴ ΔS [tex]sys[/tex] = - ΔS [tex]env[/tex]
∴ ΔS [tex]sys[/tex] = - (- 8 j/k)
∴ ΔS [tex]sys[/tex] = +8 j/k
Hence , the entropy change is equal to +8 j/k .
What is entropy change?The degree of chaos present in a material, system, or universe is known as entropy.For gases, we can say that it is their energy, as the molecules move in all directions the more energetic they are. Entropy increases with temperature since it is inversely correlated with both. The entropy of each system varies as heat is transferred across boundaries separating a system from its environment or between two systems or entities. When heat is given off or released, entropy decreases.Can learn more about change in entropy from https://brainly.in/question/525552
#SPJ4
find the current in a 5 ω resistor connected to a battery with an internal resistance of 3 ω if the emf of the battery is 9 v.
The current in a 5 ω resistor connected to a battery with an internal resistance of 3 ω if the emf of the battery is 9 v is 1.13 A
Resistance is a degree of competition to current drift in an electrical circuit. Resistance is measured in ohms, symbolized by way of the Greek letter omega (Ω). Ohms are named after Georg Simon Ohm (1784-1854), a German physicist who studied the connection between voltage, modern, and resistance.
Given,
The resistance of the resistor, R=5 ω
The internal resistance of the battery, r=3ω
The emf of the battery, E=9 V
The current through the battery is given by Ohm's law. According to this,
I = E/R=r
Where I is the current through the resistor R.
On substituting the know values,
I = 9/5+3
I = 1.13 A
Resistance is precise with R and its unit is the ohm (Ω). A resistor is a tool designed to supply resistance. Resistors can be used to restrict present-day, divide voltage, or generate warmth.
Resistance serves as a hallmark that quantifies how with no trouble modern will glide in a circuit with the use of ohms (Ω) as the unit.
Learn more about Resistance here:-https://brainly.com/question/28135236
#SPJ4
knee flexion during stair descent exceeds knee flexion during walking, is this statement true or false
Knee flexion when walking is greater than knee flexion when going down stairs. is a factual assertion.
A flexion movement is what?A bending action known as a flexion reduces the ratio in between segment and its proximate segment. In contrast to flexion, extension refers to a straightening motion that widens the angle between two bodily parts.
What kind of motion would be considered flexion?When the distance between both the bones narrows, the body flexes or bends. Flexion includes actions like raising the forearm just at elbow or bringing the hand closer to the forearm. The angle between both the vertebrae of a joint widens in extension, which is the inverse of flexion.
To know more about Flexion visit:
https://brainly.com/question/24881733
#SPJ4
serenity challenges carlos to come up with a way to use the double-slit experiment to determine the wavelength of monochromatic light. which response is correct?
The double slit experiment can be explained using the condition of the interference with which we can find the wavelength of the monochromatic light.
When waves gather, they can interfere constructively or destructively. To build a stable and well-defined interference pattern, two conditions must be met:
The wave source must be coherent. That is, they emit identical waves with a constant phase difference.
Waves should be monochromatic - they should have a single wavelength. Suppose we have two sources emitting the same wave in phase. Whether constructive or destructive interference occurs at points close to the source depends on the path length difference δ. This is the distance from the point to one source minus the distance from the point to the other source.
Conditions for constructive interference:
δ = mλ,
where m is any integer
λ is the wavelength of the light
Conditions for destructive interference:
δ = (m + 1/2) λ
Learn more about the double-slit experiment in
https://brainly.com/question/28108126
#SPJ4
a satellite moves in a stable circular orbit with speed vo at a distance r from the center of a planet. for this satellite to move in a stable circular orbit a distance 2r from the center of the planet, the speed of the satellite must be
If a satellite that moves in a stable circular orbit with speed vo at a distance r from the center of a planet, has a distance 2r from the center of the planet, the speed of the satellite is vo / √ 2
A satellite moves in a circular path due to gravitational force of the planet.
Fc = Fg
m vo² / r = G M m / r²
vo = √ ( G M / r )
M is the mass of the planet and r is the distance between center of the planet and the center of the satellite.
Here, the orbital distance is doubled from r to 2 r.
v = √ ( G M / 2 r )
v = 1 / √ 2 * ( √ G M / r )
v = vo / √ 2
Therefore, the speed of the satellite must be vo / √ 2
To know more about orbital speed
https://brainly.com/question/12531643
#SPJ4
a 10-m uniform beam weighing 100 n is supported by two vertical ropes at its ends. if a 400-n person sits at a point 2.0 m from the left end of the beam, what is the tension in each rope?
The tension in each rope is T₁ is 130 N, T₂ is 370 N.
In order for the system to be at rest, the sum of all the forces must be zero and the torque around a point on the beam must be zero.
Let the tension in the rope 1 T₁ and in rope 2 T₂:
m*a = T₁ + T₂ -100 -400 = 0
T₁ + T₂ = 500 -------(1)
Torque around the centre point of the beam is:
τ = r × F = 5* T₁ + 3*400 - 5* T₂ = 0
T₁ - T₂ = -240 ------(2)
Solving (1) and (2), we have
T₁ = 130 N and T₂ = 370 N
Thus, the tension in rope 1 is 130N and the tension in rope 2 is 370 N.
To know more about tension:
https://brainly.com/question/17080180
#SPJ4
how do sun and moon cause the ocean currents
The sun and moon cause ocean currents in several ways. First, the sun's heat causes the ocean water to expand and become less dense, which creates a rise in sea level. This rise in sea level creates a current that flows away from the equator and towards the poles.
Second, the moon's gravitational pull causes the oceans to bulge, creating tidal currents. These tidal currents can be very strong, and they cause the water to flow in circular patterns around the coasts.
Third, the moon's gravitational pull also causes the earth to rotate on its axis. This rotation creates a current called the Coriolis effect, which causes the ocean water to move in a circular pattern around the earth. This current helps to distribute heat and nutrients throughout the oceans.
Overall, the sun and moon cause ocean currents through their effects on sea level, tidal forces, and the earth's rotation.
Answer:
The sun warms up parts of the oceans. Warm waters rise just like warm air rises. So, as the warmer ocean waters begin to rise in a particular area, the cooler ocean waters from a different area will move in to replace the warmer ocean waters, and this creates our ocean currents.
A current of 27.0 mA is maintained in a single circular loop of 3.90 m circumference. A magnetic field of 0.710 T is directed parallel to the plane of the loop.a) Calculate the magnetic moment of the loop.b) What is the magnitude of the torque exerted by the magnetic field on the loop?
The magnetic moment is M = 5.40 × [tex]10^{-3} Am[/tex] and the magnitude of the Torque exerted by the magnetic field on the loop is τ = 4.32 × [tex]10^{-3}[/tex] Nm.
What does the term "magnetic moment" mean?
The measurement of an object's propensity to line up with a magnetic field is known as a magnetic moment, sometimes known as a magnetic dipole moment. The magnetic pull and direction of a magnet or other item that generates a magnetic field are known as the "Magnetic Moment" A vector quantity is the magnetic moment.
What is the magnetic moment in SI units?
Weber moment is the magnetic moment unit. Wb is used to symbolize it.
What in physics is torque?
Torque is the rotating counterpart of force in physics and mechanics. It goes by a variety of names depending on the field of research, including moment, moment of force, rotating force, and turning effect. This demonstrates how a force may alter a body's rotational motion.
Given that current through the loop is I = 17 ×[tex]10^{-3}[/tex] A,
Circumference is S = 2m
if r is the radius then S = 2πr = 2m
r = 0.318m
strength of the field is B = 0.8T
a) The magnetic moment is M = I(π[tex]r^{2}[/tex])
= 5.40×[tex]10^{-3}[/tex]Am
b) Torque parallel to the coil is τ = MB
= 4.32×[tex]10^{-3}[/tex] Nm
To know more about Magnetic moment and Torque visit:
https://brainly.com/question/15233294
#SPJ4
Sally is building a list of the types of matter that have energy. She includes liquids on her list because she can see that liquids flow. Is her list complete?.
No, Sally's list is not complete. Matter can exist in four different states: solid, liquid, gas, and plasma. All four states of matter have energy and should be included in Sally's list.
What is energy?
Energy, which is observable in the work performed as well as in the form of heat and light, is indeed the quantitative property that's also transferred to a body or a physical system in physics. Energy is a conserved resource; according to the principle of conservation of mass, energy can only be transformed from one form to another and cannot be created or destroyed. The joule is the SI's (International System of Units) measuring unit for energy (J). The kinetic energy of the a moving object, this same potential energy held by an object (for example, due to its position inside a field), the elastic energy held in a fixed material, chemical energy linked to chemical reactions, and cosmic rays conducted by electromagnetic radiation are examples of common forms of energy.
To learn more about energy
https://brainly.com/question/27438014
#SPJ4
if the rotational speed of a cd changes from 475 rpm to 200 rpm as it plays 30 minutes of music, what is the cd's average rotational acceleration?
The duration of a CD is 59.8 minutes. The CD is rotating angularly at 460 revolutions per minute when the music begins (rpm).
The temporal rate at which angular velocity changes is known as angular acceleration. The standard unit of measurement is radians per second per second. Therefore, = d d t. Rotational acceleration is another name for angular acceleration. After the music has finished, the CD is spinning at 202 rpm. The beginning angular velocity was 460rpm/60*2*Pi, which equals 48.17rad/s. The end angular velocity was 202rpm/60*2*Pi, which equals 21.15rad/s. The time in s was 59.8min*60, which equals 3588s. The angular acceleration was (21.15 - 48.17)/3588.
Learn more about acceleration here-
https://brainly.com/question/12550364
#SPJ4
If the sun mysteriously gets twice as massive as it is right now, what effect will it have on its pull on mars?.
Answer:
First of all mars will orbit a little faster many asteroids can hit mars due to its twice mass mars will get hotter then it is now