Answer:
1.5 × 10² mL
Explanation:
Step 1: Given data
Initial pressure of the gas (P₁): 1.9 atmInitial volume of the gas (V₁): 80 mLFinal pressure of the gas (P₂): 1.0 atm (standard pressure)Final volume of the gas (V₂): ?Step 2: Calculate the final volume of the gas
For an ideal gas, we can calculate the final volume of the gas using Boyle's law.
P₁ × V₁ = P₂ × V₂
V₂ = P₁ × V₁/P₂
V₂ = 1.9 atm × 80 mL/1.0 atm
V₂ = 1.5 × 10² mL
Since the pressure decreased, the volume of the gas increased.
Which statement accurate describes plate tectonics?
Answer:
the lithosphere is broken into sections called plates.
Answer:
The lithosphere is broken into sections called plates.
Explanation:
edge2020
Consider the following equilibrium.
NH3(aq) + H2O(l) equilibrium reaction arrow NH4+(aq) + OH −(aq)
What will happen to the equilibrium constant if the concentration of OH − increases through the addition of a small amount of NaOH(aq)?
Answer:
It will remain the same
Explanation:
The equilibrium constant of the reaction will remain the same if the concentration of the OH is increased.
Changes in concentration values of any of the reactant does not affect the value of the equilibrium constant.
The equilibrium constant is a constant at a given temperature. It is temperature dependent. Since we have no change in temperature, therefore, the equilibrium constant will not change.The equilibrium constant if the concentration of OH − increases through the addition of a small amount of NaOH(aq) is :
- Remains same.
Equilibrium ReactionThe equilibrium constant of the response will stay the same in case the concentration of the OH is increased.
Changes in concentration values of any of the reactant does not influence the esteem of the equilibrium constant.
The equilibrium constant may be a consistent at a given temperature.
It is temperature dependent. Since we have no alter in temperature.Learn more about "Equilibrium":
https://brainly.com/question/15244329?referrer=searchResults
what do y'all girls find attractive on a guy?
Answer:
alot of things
Explanation:
trioxocarbonate iv acid
Answer:
Trioxocarbonate (iv) are salts derived from trioxocarbonate (iv) acid when it reacts with metals and metallic oxides. All trioxocarbonate (iv) salts of Sodium (Na), Potassium (K) and Ammonium(NH4+) are soluble while all others are insoluble.
very
Which of the
following mineral
characteristics are
associated with
gold?
A. it is a compound
B. it is made of many elements
C. it is man made
D. it is a solid
Answer:
D,B
Explanation:
there are 79 elements in gold
In an aqueous solution, a 0.100 M solution of glucose is prepared with a total volume of 0.150 Liters. If the molar mass of glucose is 180.16 g/mol how many grams must the solution contain?
Answer:
2.70 g of glucose.
Explanation:
The following data were obtained from the question:
Molarity of the glucose solution = 0.1 M
Volume of solution = 0.15 L
Molar mass of glucose = 180.16 g/mol
Mass of glucose =.?
Next, we shall determine the number of mole of glucose in the solution. This can be obtained as follow:
Molarity of the glucose solution = 0.1 M
Volume of solution = 0.15 L
Mole glucose =?
Molarity = mole /Volume
0.1 = Mole of glucose /0.15
Cross multiply
Mole of glucose = 0.1 × 0.15
Mole of glucose = 0.015 mole
Finally, we shall determine the mass of glucose in the solution as follow:
Mole of glucose = 0.015 mole
Molar mass of glucose = 180.16 g/mol
Mass of glucose =.?
Mole = mass /molar mass
0.015 = mass of glucose /180.16
Cross multiply
Mass of glucose = 0.015 × 180.16
Mass of glucose = 2.70 g
Therefore, the solution contains 2.70 g of glucose.
The grams that the solution must contain is :
- 2.70 g of glucose.
Mole ConceptGiven:
Molarity of the glucose solution = 0.1 M
Volume of solution = 0.15 L
Molar mass of glucose = 180.16 g/mole
Molarity of the glucose solution = 0.1 M
Volume of solution = 0.15 L
Molarity = mole /Volume
0.1 = Mole of glucose /0.15
Mole of glucose = 0.1 × 0.15
Mole of glucose = 0.015 mole
Mole of glucose = 0.015 mole
Molar mass of glucose = 180.16 g/mol
Mass of glucose =.?
Mole = mass /molar mass
0.015 = mass of glucose /180.16
Mass of glucose = 0.015 × 180.16
Mass of glucose = 2.70 g
The solution contains 2.70 g of glucose.
Learn more about "Mole":
https://brainly.com/question/1269011?referrer=searchResults
Is steel wool and vinegar an exothermic reaction? Explain.
Answer:
Vinegar contains acetic acid which removes this coating. When the protective coating is removed, oxygen in the atmosphere can reach the iron in the steel wool and a chemical reaction called oxidation occurs. ... This reaction is also an exothermic reaction. It creates heat energy
Explanation:
hope this helps u
Vinegar incorporates acetic acid which gets rid of this coating. When the defensive coating is removed, oxygen in the environment can reach the iron in the metal wool and a chemical reaction called oxidation occurs. This reaction is additionally an exothermic reaction. It creates warmth energy.
Hope it helped! Have a nice day! <3
You have two containers. The first container contains 22.99 grams of solid
sodium (Na). The second container contains 15.999 grams of Oxygen (O).
Which container has more moles of the indicated substance? *
Answer:
The sodium has more moles.
n(Na)=2.09 mole
n(O)=0.999 mole
The density of a substance is 1.63 grams per milliliter. What is the volume, in ml, of a sample of the substance with a mass of 5.40Kg? 1000 g = 1 kg
Answer:
############################
Explanation:
Suppose that you are a scientist who studies climate changes. While examining the rings of tree trunks, you notice several very large tree rings. What can you conclude about the climate during those years?
Answer:
The climate was wet and cold
Explanation:
Answer:
The large tree rings allow you to conclude that the climate was either very warm or wet during those growing seasons, because greater than normal growth occurred.
Explanation: It is the edge sample response
Mineral reaction to stress
Answer:
Tenacity describes the reaction of a mineral to stress such as crushing, bending, breaking, or tearing. ... The majority of all minerals are brittle. An example is Quartz. (Minerals that are not brittle may be referred to as Nonbrittle minerals.)
How does the number of atoms or molecules in a system affect its thermal energy?
A. A system with fewer atoms and molecules has more thermal energy.
B. A system with more atoms and molecules has more thermal energy.
C. The number of atoms or molecules does not affect the thermal energy of a system.
D. Thermal energy increases as the atoms and molecules in a system move more.
Answer:
D. Thermal energy increases as the atoms and molecules in a system move more.
Explanation:
Thermal energy is a form of kinetic energy possessed by molecules of a system. The measure of this kinetic energy in an atom is called heat.
The average kinetic energy of a system is the temperature.
According to the kinetic theory, the more the particles move, the more their thermal energy. Thermal energy is often predicated on the velocity of the particles of the medium.What is the pH value of distilled water?
Answer:
7
Explanation:
________________naturally helps cold-blooded animals warm up so that they can function.
Question 5 options:
Radiation
Convection
Warm Water
Heating pad
Answer:
Warm Water
Explanation:
In warm temperatures, cold-blooded animals are more active and can travel more quickly. This occurs because heat activated reactions provide energy to move muscles. In the absence of heat the animal becomes slow and sluggish. So they are usually inactive and rest when it is cold. As they do not need to feed much, they spend less time looking for food, so this life strategy works for them.
Brainliest?
Answer warm water Explanation:i have the same question
how many moles of nitroge are there in 50.0 g of nitrogen?
1.785714286 moles
The number of moles (n) for nitrogen is: [ n=50.0÷28.0 ] = 1.785714286 moles.
Determine the volume (mL) of 15.0 M sulfuric acid needed to react with 45.0 g of
aluminum to produce aluminum sulfate.
Answer:
167 mL.
Explanation:
We'll begin by calculating the number of moles in 45 g of aluminum (Al). This can be obtained as follow:
Mass of Al = 45 g
Molar mass of Al = 27 g/mol
Mole of Al =?
Mole = mass /Molar mass
Mole of Al = 45/27
Mole of Al = 1.67 moles
Next, the balanced equation for the reaction. This is given below:
2Al + 3H2SO4 → Al2(SO4)3 + 3H2
From the balanced equation above,
2 moles of Al reacted with 3 moles of H2SO4.
Next, we shall determine the number of mole of H2SO4 needed to react with 45 g (i.e 1.67 moles) of Al. This can be obtained as:
From the balanced equation above,
2 moles of Al reacted with 3 moles of H2SO4.
Therefore, 1.67 moles of Al will react with = (1.67 × 3)/2 = 2.505 moles of H2SO4.
Thus 2.505 moles of H2SO4 is needed for the reaction.
Next, we shall determine the volume of H2SO4 needed for the reaction. This can be obtained as follow:
Molarity of H2SO4 = 15.0 M
Mole of H2SO4 = 2.505 moles
Volume =?
Molarity = mole /Volume
15 = 2.505 / volume
Cross multiply
15 × volume = 2.505
Divide both side by 15
Volume = 2.505/15
Volume = 0.167 L
Finally, we shall convert 0.167 L to mL. This can be obtained as follow:
1 L = 1000 mL
Therefore,
0.167 L = 0.167 L × 1000 mL / 1 L
0.167 L = 167 mL
Thus, 0.167 L is equivalent to 167 mL.
Therefore, 167 mL H2SO4 is needed for the reaction.
SO3 is a covalent compound with no lone pairs on the central S atom. What's the structure of a molecule of SO3? Is an SO3 molecule polar or non-polar?
Question 14 options:
A)
Trigonal planar, non-polar
B)
Trigonal pyramidal, polar
C)
Trigonal planar, polar
D)
Trigonal pyramidal, non-polar
Answer:
A
Explanation:
it has non polar molecule, because it has the equal sharing of electrons, so equal repulsion from all sides. atoms are equally represented.
Answer:
Trigonal planar, non-polar
Explanation:
Please help I beg you
Answer:
is highly respect is correct I promise!
What two subatomic particles add up to make the mass?
i need help ):
soo.. help me ! please (:
Answer:
23 Sandwiches
6 slices of bread
0 slices of cheese
Explanation:
brainliest pls:)
pls help!!
The number that represents a neutral pH is ________.
Answer:
7
Explanation:
HURRY PLEASE HELP
Four students are discussing the benefits and problems associated with using nuclear energy as alternative energy source. Which student has the strongest argument about using nuclear energy?
A. Nuclear power plants pollute the environment and causes cancer in populations that use nuclear energy instead of traditional electricity.
B. Nuclear power plants provide more energy than traditional coal plants; however, nuclear power plants also produce more greenhouse gases.
C. Nuclear power plants run a high risk of nuclear meltdown killing all the organisms in a 20 mile radius.
D. Nuclear power plants provide more energy than traditional coal plants and these plants do not produce greenhouse gases.
Answer:
A
Explanation:
its A
facts o.o
Nuclear power plants pollute the environment and causes cancer in populations that use nuclear energy instead of traditional electricity. Hence option A is correct.
What is nuclear power plant?Nuclear power plant is defined as a particular kind of power plant that produces electricity by nuclear fission. Nuclear power plants use the heat generated by nuclear fission to transform water into steam in a controlled environment, which then powers generators to produce electricity. Low-enriched uranium fuel is used in nuclear power plants to generate electricity through a process known as fission, which involves breaking uranium atoms in a nuclear reactor.
A clean energy source with no emissions is nuclear. It produces energy by fission, which is the splitting of uranium atoms to release energy. Without the toxic consequences that come from burning fossil fuels, electricity is produced using the heat from fission to produce steam, which turns a turbine.
Thus, nuclear power plants pollute the environment and causes cancer in populations that use nuclear energy instead of traditional electricity. Hence option A is correct.
To learn more about nuclear power plant, refer to the link below:
https://brainly.com/question/424603
#SPJ2
A sample is found to contain 2.98x10^-10 g of salt. Express this quantity in nanograms.
This quantity = 0.298 nanograms(ng)
Further explanationMass is one of the principal quantities, which is related to the matter in the object
The main mass unit consists of 7 units of other than other units of mass such as quintals, tons, pounds, ounces:
Kilogram, kg
Hectogram, hg
Decagram, dag
gram, g
Desigram, with
centigram, cg
milligram, mg
Each unit descends then multiplied by 10, and if one unit increases then divided by 10
Conversion of other mass units:
10⁻³ g ⇒mg-milligrams
10³ g ⇒kg-kilograms
10⁻⁶ g ⇒µg-micrograms (mcg)
10⁶ g ⇒Mg-megagrams (tons)
10⁻⁹ g ⇒ng-nanograms
10⁹ g ⇒Gg-gigagram
10⁻¹² g ⇒pg-pikogram
2.98 x 10⁻¹⁰ g to nanograms(ng)
[tex]\tt 2.98\times 10^{-10}\times 10^9=0.298~ng[/tex]
The definition of having to do with the physical properties and terrain of an area refers to the
term
environmental
forecasting
meticulous
topographical
adjacent
Answer:
Topographical
Explanation:
When it comes to questions such as this one, the thing that could help you the most is a dictionary. A dictionary is an alphabetically arranged listing of words that contains various information about those words, such as their definitions, examples, origin, pronunciation, etc.
The term the given definition refers to is topographical. Topography is the study of the forms and features of land surfaces. The topography of an area refers to its physical properties and terrain or their description (e.g. how they're shown on a map).
which of the following is an example of
a physical property?
Answer:
physical property is property that you can touch, smell as it is bumpy it smells like eggs.
Explanation:
YW
Answer:
Physical properties include: appearance, texture, color, odor, melting point, boiling point, density, solubility, polarity, and many others.
Explanation:
the illustration shows how sonar can be used to study the deep ocean which type of waves does sonar use
Answer:
d
Explanation:
11) Nitrogen oxides undergo many interesting reactions in the environment and in industry. Given the following information, calculate H for the overall equation:
2 NO2(g) + 1/2 O2(g) N2O5(s).
N2O5(s) 2 NO(g) + 3/2 O2(g), deltaH = 223.7 kJ
NO2(g) NO(g) + 1/2 O2(g), delataH = 57.1 kJ
delataH = ______kJ
12))))Write all coefficients, even if they are fractions or 1.)
(a) (Apply fractions as needed.)
______ _____(s) + ______ ______ (g) 5 NaCl(s)
(b) (Use the lowest possible coefficients.)
_______ _____ (s) + ______ _____(g) _____CaCl2(s)
(c) (Apply fractions as needed.)
_____ _____(g) _____O3(g)
(d) (Apply fractions as needed.)
______Mg(s) + _____ ______(s) + _____ ____(g) _____Mg3(PO4)2(s)
Answer:
one more time
Explanation:
shpuld i go
A very new item just arrived in the market. It is very good for construction, and other things. Now, this item has chemicals, and in every drop, there are 400 grams of NaCI. If there are 10 drops in this item, how many grams of NaCI are in one bottle?
Answer: 4,000 grams of NaCI
Explanation:
We know that there are 400g of NaCI in one drop.
This bottle has 10 drops of this item.
So, we have to multiply the amount of NaCI in a drop by the amount of drops.
400 x 10 = 4,000.
The answer to the question is 4,000. Hope this helps!
Which problem that the most scientists believe is partly caused by carbon dioxide?
Answer:
Climate change
Explanation:
Climate change is primarily a problem of too much carbon dioxide (CO2) in the atmosphere. This carbon overload is caused mainly when we burn fossil fuels like coal, oil and gas or cut down and burn forests
Question 1 (1 point)
A chemical reaction is when substances are changed into other substances.
True or False