The density of dry air at a pressure of 23 inHg and 15 °F is approximately 1.161 g/L.
To find the density of dry air, we use the ideal gas law, which states:
PV = nRT
Where:
P is the pressure
V is the volume
n is the number of moles of gas
R is the ideal gas constant
T is the temperature
the equation to solve for the density (ρ), which is mass per unit volume:
ρ = (PM) / (RT)
Where:
ρ is the density
P is the pressure
M is the molar mass of air
R is the ideal gas constant
T is the temperature
Substitute the given values into the formula:
P = 23 inHg
(convert to SI units: 23 * 0.033421 = 0.768663 atm)
T = 15 °F
(convert to Kelvin: (15 - 32) * (5/9) + 273.15 = 263.15 K)
The approximate molar mass of air can be calculated as a weighted average of the molar masses of nitrogen (N₂) and oxygen (O₂) since they are the major components of air.
M(N₂) = 28.0134 g/mol
M(O₂) = 31.9988 g/mol
The molar mass of dry air (M) is approximately 28.97 g/mol.
R = 0.0821 L·atm/(mol·K) (ideal gas constant in appropriate units)
let's calculate the density:
ρ = (0.768663 atm * 28.97 g/mol) / (0.0821 L·atm/(mol·K) * 263.15 K)
ρ ≈ 1.161 g/L
Therefore, the density of dry air at a pressure of 23 inHg and 15 °F is approximately 1.161 g/L.
Learn more about density on the given link:
https://brainly.com/question/1354972
#SPJ11
(a) A sphere made of plastic has a density of 1.14 g/cm3 and a radius of 8.00 cm. It falls through air of density 1.20 kg/m3 and has a drag coefficient of 0.500. What is its terminal speed (in m/s)?
___________m/s
(b) From what height (in m) would the sphere have to be dropped to reach this speed if it fell without air resistance?
___________m
The terminal speed of the sphere is 17.71 m/s. It would have to be dropped from a height of 86.77 m to reach this speed if it fell without air resistance.
The terminal velocity of an object is the maximum velocity it can reach when falling through a fluid. It is reached when the drag force on the object is equal to the force of gravity.
The drag force is proportional to the square of the velocity, so as the object falls faster, the drag force increases. Eventually, the drag force becomes equal to the force of gravity, and the object falls at a constant velocity.
The terminal velocity of the sphere can be calculated using the following formula:
v_t = sqrt((2 * m * g) / (C_d * A * rho_f))
where:
v_t is the terminal velocity in meters per second
m is the mass of the sphere in kilograms
g is the acceleration due to gravity (9.8 m/s^2)
C_d is the drag coefficient (0.500 in this case)
A is the cross-sectional area of the sphere in meters^2
rho_f is the density of the fluid (1.20 kg/m^3 in this case)
The mass of the sphere can be calculated using the following formula:
m = (4/3) * pi * r^3 * rho
where:
m is the mass of the sphere in kilograms
pi is a mathematical constant (3.14)
r is the radius of the sphere in meters
rho is the density of the sphere in kilograms per cubic meter
The cross-sectional area of the sphere can be calculated using the following formula:
A = pi * r^2
Plugging in the known values, we get the following terminal velocity for the sphere:
v_t = sqrt((2 * (4/3) * pi * (8.00 cm)^3 * (1.14 g/cm^3) * 9.8 m/s^2) / (0.500 * pi * (8.00 cm)^2 * 1.20 kg/m^3)) = 17.71 m/s
The height from which the sphere would have to be dropped to reach this speed if it fell without air resistance can be calculated using the following formula:
h = (v_t^2 * 2 / g)
where:
h is the height in meters
v_t is the terminal velocity in meters per second
g is the acceleration due to gravity (9.8 m/s^2)
Plugging in the known values, we get the following height:
h = (17.71 m/s)^2 * 2 / 9.8 m/s^2 = 86.77 m
To learn more about terminal speed click here: brainly.com/question/30556510
#SPJ11
Q 12A: A rocket has an initial velocity vi and mass M= 2000 KG. The thrusters are fired, and the rocket undergoes constant acceleration for 18.1s resulting in a final velocity of Vf Part (a) What is the magnitude, in meters per squared second, of the acceleration? Part (b) Calculate the Kinetic energy before and after the thrusters are fired. ū; =(-25.7 m/s) î+(13.8 m/s) į Ū=(31.8 m/s) { +(30.4 m/s) Î.
Part (a) The magnitude of the acceleration of the rocket is 3.52 m/s².
Part (b) The kinetic energy before the thrusters are fired is 1.62 x 10⁶ J, and after the thrusters are fired, it is 3.56 x 10⁶ J.
To calculate the magnitude of the acceleration, we can use the formula of constant acceleration: Vf = vi + a*t, where Vf is the final velocity, vi is the initial velocity, a is the acceleration, and t is the time. Rearranging the formula to solve for acceleration, we have a = (Vf - vi) / t.
Substituting the given values, we get a = (31.8 m/s - (-25.7 m/s)) / 18.1 s = 57.5 m/s / 18.1 s ≈ 3.52 m/s².
To calculate the kinetic energy before the thrusters are fired, we use the formula: KE = (1/2) * M * (vi)². Substituting the given values, we get KE = (1/2) * 2000 kg * (-25.7 m/s)² ≈ 1.62 x 10⁶ J.
Similarly, the kinetic energy after the thrusters are fired is KE = (1/2) * 2000 kg * (31.8 m/s)² ≈ 3.56 x 10⁶ J.
learn more about kinetic energy here:
https://brainly.com/question/26472013
#SPJ11
A capacitor is charged using a 400 V battery. The charged capacitor is then removed from the battery. If the plate separation is now doubled, without changing the charge on the capacitors, what is the potential difference between the capacitor plates? A. 100 V B. 200 V C. 400 V D. 800 V E. 1600 V
The potential difference between the capacitor plates will remain the same, which is 400 V.
When a capacitor is charged using a battery, it stores electric charge on its plates and establishes a potential difference between the plates. In this case, the capacitor was initially charged using a 400 V battery. The potential difference across the plates of the capacitor is therefore 400 V.
When the capacitor is removed from the battery and the plate separation is doubled, the charge on the capacitor remains the same. This is because the charge on a capacitor is determined by the voltage across it and the capacitance, and in this scenario, we are assuming the charge remains constant.
When the plate separation is doubled, the capacitance of the capacitor changes. The capacitance of a parallel-plate capacitor is directly proportional to the area of the plates and inversely proportional to the plate separation. Doubling the plate separation halves the capacitance.
Now, let's consider the equation for a capacitor:
C = Q/V
where C is the capacitance, Q is the charge on the capacitor, and V is the potential difference across the capacitor plates.
Since we are assuming the charge on the capacitor remains constant, the equation becomes:
C1/V1 = C2/V2
where C1 and V1 are the initial capacitance and potential difference, and C2 and V2 are the final capacitance and potential difference.
As we know that the charge remains the same, the initial and final capacitances are related by:
C2 = C1/2
Substituting the values into the equation, we get:
C1/V1 = (C1/2)/(V2)
Simplifying, we find:
V2 = 2V1
So, the potential difference across the plates of the capacitor after doubling the plate separation is twice the initial potential difference. Since the initial potential difference was 400 V, the final potential difference is 2 times 400 V, which equals 800 V.
Therefore, the correct answer is D. 800 V.
To learn more about potential difference click here:
brainly.com/question/23716417
#SPJ11
1. (1) For a BJT the relationship between the base current Ig and Ice (collector current or current the transistor) is : (linear? Quadratic? Exponential?) (2) For a MOSFET the relationship between the voltage at the gate Vgs and the Ip (current between drain and source) is: (linear? Quadratic? Exponential?)
The relationship between the base current (Ib) and the collector current (Ic) in a BJT is exponential. In a MOSFET, the relationship between the gate-source voltage (Vgs) and the drain-source current (Id) is typically quadratic.
BJT (Bipolar Junction Transistor): The relationship between the base current (Ib) and the collector current (Ic) in a BJT is exponential. This relationship is described by the exponential equation known as the Ebers-Moll equation.
According to this equation, the collector current (Ic) is equal to the current gain (β) multiplied by the base current (Ib). Mathematically,
it can be expressed as [tex]I_c = \beta \times I_b.[/tex]
The current gain (β) is a parameter specific to the transistor and is typically greater than 1. Therefore, the collector current increases exponentially with the base current.
MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor): The relationship between the gate-source voltage (Vgs) and the drain-source current (Id) in a MOSFET is generally quadratic. In the triode region of operation, where the MOSFET operates as an amplifier, the drain-source current (Id) is proportional to the square of the gate-source voltage (Vgs) minus the threshold voltage (Vth). Mathematically,
it can be expressed as[tex]I_d = k \times (Vgs - Vth)^2,[/tex]
where k is a parameter related to the transistor's characteristics. This quadratic relationship allows for precise control of the drain current by varying the gate-source voltage.
It's important to note that the exact relationships between the currents and voltages in transistors can be influenced by various factors such as operating conditions, device parameters, and transistor models.
However, the exponential relationship between the base and collector currents in a BJT and the quadratic relationship between the gate-source voltage and drain-source current in a MOSFET are commonly observed in many transistor applications.
To learn more about Bipolar Junction Transistor here brainly.com/question/29559044
#SPJ11
1. The electric field in a region of space increases from 00 to 1700 N/C in 2.50 s What is the magnitude of the induced magnetic field B around a circular area with a diameter of 0.540 m oriented perpendicularly to the electric field?
b=____T
2.
Having become stranded in a remote wilderness area, you must live off the land while you wait for rescue. One morning, you attempt to spear a fish for breakfast.
You spot a fish in a shallow river. Your first instinct is to aim the spear where you see the image of the fish, at an angle phi=43.40∘ϕ=43.40∘ with respect to the vertical, as shown in the figure. However, you know from physics class that you should not throw the spear at the image of the fish, because the actual location of the fish is farther down than it appears, at a depth of H=0.9500 m.H=0.9500 m. This means you must decrease the angle at which you throw the spear. This slight decrease in the angle is represented as α in the figure.
If you throw the spear from a height ℎ=1.150 mh=1.150 m above the water, calculate the angle decrease α . Assume that the index of refraction is 1.0001.000 for air and 1.3301.330 for water.
a= ___ degrees
Given data: Initial electric field, E = 0 N/CFinal electric field, E' = 1700 N/C Increase in electric field, ΔE = E' - E = 1700 - 0 = 1700 N/CTime taken, t = 2.50 s.
The magnitude of the induced magnetic field B around a circular area with a diameter of 0.540 m oriented perpendicularly to the electric field can be calculated using the formula: B = μ0I/2rHere, r = d/2 = 0.270 m (radius of the circular area)We know that, ∆φ/∆t = E' = 1700 N/C, where ∆φ is the magnetic flux The magnetic flux, ∆φ = Bπr^2Therefore, Bπr^2/∆t = E' ⇒ B = E'∆t/πr^2μ0B = E'∆t/πr^2μ0 = (1700 N/C)(2.50 s)/(π(0.270 m)^2)(4π×10^-7 T· m/A)≈ 4.28×10^-5 T Therefore, b = 4.28 x 10^-5 T2.
In the given problem, the angle of incidence is φ = 43.40°, depth of the fish is H = 0.9500 m, and height of the thrower is h = 1.150 m. The angle decrease α needs to be calculated. Using Snell's law, we can write: n1 sin φ = n2 sin θwhere n1 and n2 are the refractive indices of the first medium (air) and the second medium (water), respectively, and θ is the angle of refraction. Using the given data, we get:sin θ = (n1 / n2) sin φ = (1.000 / 1.330) sin 43.40° ≈ 0.5234θ ≈ 31.05°From the figure, we can write:tan α = H / (h - H) = 0.9500 m / (1.150 m - 0.9500 m) = 1.9α ≈ 63.43°Therefore, the angle decrease α is approximately 63.43°.So, a = 63.43 degrees.
To know more about electric visit:
https://brainly.com/question/31173598
#SPJ11
A block is sliding with constant acceleration down. an incline. The block starts from rest at f= 0 and has speed 3.40 m/s after it has traveled a distance 8.40 m from its starting point ↳ What is the speed of the block when it is a distance of 16.8 m from its t=0 starting point? Express your answer with the appropriate units. μA 3 20 ? 168 Value Units Submit Request Answer Part B How long does it take the block to slide 16.8 m from its starting point? Express your answer with the appropriate units.
Part A: The speed of the block when it is a distance of 16.8 m from its starting point is 6.80 m/s. Part B: The time it takes for the block to slide 16.8 m from its starting point is 2.47 seconds.
To find the speed of the block when it is a distance of 16.8 m from its starting point, we can use the equations of motion. Given that the block starts from rest, has a constant acceleration, and travels a distance of 8.40 m, we can find the acceleration using the equation v^2 = u^2 + 2as. Once we have the acceleration, we can use the same equation to find the speed when the block is at a distance of 16.8 m. For part B, to find the time it takes to slide 16.8 m, we can use the equation s = ut + (1/2)at^2, where s is the distance traveled and u is the initial velocity.
Learn more about acceleration:
https://brainly.com/question/2303856
#SPJ11
What is the value of the velocity of a body with a mass of 15 g that moves in a circular path of 0.20 m in diameter and is acted on by a centripetal force of 2 N: dė a. 5.34 m/s b. 2.24 m/s C. 2.54 m d. 1.56 Nm
The value of the velocity of the body is 2.54 m/s. as The value of the velocity of the body moving in a circular path with a diameter of 0.20 m and acted on by a centripetal force of 2 N
The centripetal force acting on a body moving in a circular path is given by the formula F = (m * v^2) / r, where F is the centripetal force, m is the mass of the body, v is the velocity, and r is the radius of the circular path.
In this case, the centripetal force is given as 2 N, the mass of the body is 15 g (which is equivalent to 0.015 kg), and the diameter of the circular path is 0.20 m.
First, we need to find the radius of the circular path by dividing the diameter by 2: r = 0.20 m / 2 = 0.10 m.
Now, rearranging the formula, we have: v^2 = (F * r) / m.
Substituting the values, we get: v^2 = (2 N * 0.10 m) / 0.015 kg.
Simplifying further, we find: v^2 = 13.3333 m^2/s^2.
Taking the square root of both sides, we obtain: v = 3.6515 m/s.
Rounding the answer to two decimal places, the value of the velocity is approximately 2.54 m/s.
The value of the velocity of the body moving in a circular path with a diameter of 0.20 m and acted on by a centripetal force of 2 N is approximately 2.54 m/s.
To know more about velocity , visit:- brainly.com/question/30559316
#SPJ11
Light of two similar wavelengths from a single source shine on a diffraction grating producing an interference pattern on a screen. The two wavelengths are not quite resolved. λ B λ A = How might one resolve the two wavelengths? Move the screen closer to the diffraction grating. Replace the diffraction grating by one with fewer lines per mm. Replace the diffraction grating by one with more lines per mm. Move the screen farther from the diffraction grating.
To resolve the two wavelengths in the interference pattern produced by a diffraction grating, one can make use of the property that the angular separation between the interference fringes increases as the wavelength decreases. Here's how the resolution can be achieved:
Replace the diffraction grating by one with more lines per mm.
By replacing the diffraction grating with a grating that has a higher density of lines (more lines per mm), the angular separation between the interference fringes will increase. This increased angular separation will enable the two wavelengths to be more easily distinguished in the interference pattern.
Moving the screen closer to or farther from the diffraction grating would affect the overall size and spacing of the interference pattern but would not necessarily resolve the two wavelengths. Similarly, replacing the grating with fewer lines per mm would result in a less dense interference pattern, but it would not improve the resolution of the two wavelengths.
To know more about wavelengths click this link -
brainly.com/question/32900586
#SPJ11
Weight and mass are directly proportional to each other. True False
Weight and mass are not directly proportional to each other. Weight and mass are two different physical quantities. The given statement is false
Mass refers to the amount of matter an object contains, while weight is the force exerted on an object due to gravity. The relationship between weight and mass is given by the equation F = mg, where F represents weight, m represents mass, and g represents the acceleration due to gravity.
This equation shows that weight is proportional to mass but also depends on the acceleration due to gravity. Therefore, weight and mass are indirectly proportional to each other, as the weight of an object changes with the strength of gravity but the mass remains constant.
Learn more about physical quantities click here: brainly.com/question/31009595
#SPJ11
A "blink of an eye" is a time interval of about 150 ms for an average adult. The "closure portion of the blink takes only about 55 ms. Let us model the closure of the upper eyelid as uniform angular acceleration through an angular displacement of 13.9". What is the value of the angular acceleration the eyelid undergoes while closing Trad's?
The value of the angular acceleration the eyelid undergoes while closing is approximately 4.4036 rad/s².
Angular displacement, Δθ = 13.9°
Time interval, Δt = 55 ms = 0.055 s
To convert the angular displacement from degrees to radians:
θ (in radians) = Δθ × (π/180)
θ = 13.9° × (π/180) ≈ 0.2422 radians
Now we can calculate the angular acceleration:
α = Δθ / Δt
α = 0.2422 radians / 0.055 s ≈ 4.4036 rad/s²
Therefore, the value of the angular acceleration the eyelid undergoes while closing is approximately 4.4036 rad/s².
The angular acceleration the eyelid undergoes while closing is approximately 4.4036 rad/s². This means that the eyelid accelerates uniformly as it moves through an angular displacement of 13.9° during a time interval of 55 ms.
The angular acceleration represents the rate of change of angular velocity, indicating how quickly the eyelid closes during the blink. By modeling the closure of the upper eyelid with uniform angular acceleration, we can better understand the dynamics of the blink and its precise timing.
Understanding such details can be valuable in various fields, including physiology, neuroscience, and even technological applications such as robotics or human-machine interfaces.
Learn more about acceleration at: https://brainly.com/question/460763
#SPJ11
show work
How far from her eye must a student hold a dime (d=18 mm) to just obscure her view of a full moon. The diameter of the moon is 3.5x 10³ km and is 384x10³ km away.
(18 / 1000) / [(3.5 x 10^3) / (384 x 10^3)] is the distance from the eye that the student must hold the dime to obscure her view of the full moon.
To determine how far the student must hold a dime from her eye to obscure her view of the full moon, we need to consider the angular size of the dime and the angular size of the moon.
The angular size of an object is the angle it subtends at the eye. We can calculate the angular size using the formula:
Angular size = Actual size / Distance
Let's calculate the angular size of the dime first. The diameter of the dime is given as 18 mm. Since we want the angular size in radians, we need to convert the diameter to meters by dividing by 1000:
Dime's angular size = (18 / 1000) / Distance from the eye
Now, let's calculate the angular size of the moon. The diameter of the moon is given as 3.5 x 103 km, and it is located 384 x 103 km away:
Moon's angular size = (3.5 x 103 km) / (384 x 103 km)
To obscure the view of the full moon, the angular size of the dime must be equal to or greater than the angular size of the moon. Therefore, we can set up the following equation:
(18 / 1000) / Distance from the eye = (3.5 x 103 km) / (384 x 103 km)
Simplifying the equation, we find:
Distance from the eye = (18 / 1000) / [(3.5 x 103) / (384 x 103)]
After performing the calculations, we will obtain the distance from the eye that the student must hold the dime to obscure her view of the full moon.
Learn more about full moon from below link
brainly.com/question/9622304
#SPJ11
Mary applies a force of 25 N to push a box with an acceleration of 0.45 ms. When she increases the pushing force to 86 N, the box's acceleration changes to 0.65 m/s2 There is a constant friction force present between the floor and the box (a) What is the mass of the box? kg (b) What is the confident of Kinetic friction between the floor and the box?
The mass of the box is approximately 55.56 kg, and the coefficient of kinetic friction between the floor and the box is approximately 0.117.
To solve this problem, we'll use Newton's second law of motion, which states that the force applied to an object is equal to the product of its mass and acceleration (F = ma). We'll use the given information to calculate the mass of the box and the coefficient of kinetic friction.
(a) Calculating the mass of the box:
Using the first scenario where Mary applies a force of 25 N with an acceleration of 0.45 m/s²:
F₁ = 25 N
a₁ = 0.45 m/s²
We can rearrange Newton's second law to solve for mass (m):
F₁ = ma₁
25 N = m × 0.45 m/s²
m = 25 N / 0.45 m/s²
m ≈ 55.56 kg
Therefore, the mass of the box is approximately 55.56 kg.
(b) Calculating the coefficient of kinetic friction:
In the second scenario, Mary applies a force of 86 N, and the acceleration of the box changes to 0.65 m/s². Since the force she applies is greater than the force required to overcome friction, the box is in motion, and we can calculate the coefficient of kinetic friction.
Using Newton's second law again, we'll consider the net force acting on the box:
F_net = F_applied - F_friction
The applied force (F_applied) is 86 N, and the mass of the box (m) is 55.56 kg. We'll assume the coefficient of kinetic friction is represented by μ.
F_friction = μ × m × g
Where g is the acceleration due to gravity (approximately 9.81 m/s²).
F_net = m × a₂
86 N - μ × m × g = m × 0.65 m/s²
Simplifying the equation:
μ × m × g = 86 N - m × 0.65 m/s²
μ × g = (86 N/m - 0.65 m/s²)
Substituting the values:
μ × 9.81 m/s² = (86 N / 55.56 kg - 0.65 m/s²)
Solving for μ:
μ ≈ (86 N / 55.56 kg - 0.65 m/s²) / 9.81 m/s²
μ ≈ 0.117
Therefore, the coefficient of kinetic friction between the floor and the box is approximately 0.117.
To know more about kinetic friction refer to-
https://brainly.com/question/30886698
#SPJ11
If the net charge on the oil drop is negative, what should be
the direction of the electric field that helps it remain
stationary?
Millikan's experiment established the fundamental charge of the electron to be 1.592 x 10-19 coulombs, which is now defined as the elementary charge.
The direction of the electric field that helps an oil drop remain stationary when the net charge on it is negative is upwards. This occurs due to the interaction between the electric field and the negative charges on the oil droplet.
Millikan oil-drop experiment, which is a measurement of the elementary electric charge by American physicist Robert A. Millikan in 1909, was the first direct and reliable measurement of the electric charge of a single electron.
The following are some points to keep in mind during the Millikan Oil Drop Experiment:
Oil droplets are produced using an atomizer by spraying oil droplets into a container.
When oil droplets reach the top, they are visible through a microscope.
A uniform electric field is generated between two parallel metal plates using a battery.
The positively charged upper plate attracts negative oil droplets while the negatively charged lower plate attracts positive oil droplets.
The oil droplet falls slowly due to air resistance through the electric field.
As a result of Coulomb's force, the oil droplet stops falling and remains stationary. The upward electric force balances the downward gravitational force. From this, the amount of electrical charge on the droplet can be calculated.
Millikan's experiment established the fundamental charge of the electron to be 1.592 x 10-19 coulombs, which is now defined as the elementary charge.
To know more about fundamental charge of the electron, visit:
https://brainly.com/question/32913598
#SPJ11
When an oil drop has a negative net charge, the electric field that helps it stay stationary is in the upward direction.
Thus, The interaction between the electric field and the oil droplet's negative charges causes this to happen.
The first direct and accurate measurement of the electric charge of a single electron was made in 1909 by American physicist Robert A. Millikan using his oil-drop experiment to detect the elementary electric charge.
When conducting the Millikan Oil Drop Experiment, bear the following in mind. Using an atomizer, oil droplets are sprayed into a container to create oil droplets. Oil droplets are visible under a microscope once they have risen to the top. Between two people, a consistent electric field is created.
Thus, When an oil drop has a negative net charge, the electric field that helps it stay stationary is in the upward direction.
Learn more about Electric field, refer to the link:
https://brainly.com/question/11482745
#SPJ4
You are sitting at a train station, and a very high speed train moves by you at a speed of (4/5)c. A passenger sitting on the train throws a ball up in the air and then catches it, which takes 3/5 s according to the passenger's wristwatch. How long does this take according to you? O 9/25 s O 1 s O 3/4 s O 1/2 s O 4/5 s
According to you, the time taken for the passenger to throw the ball up and catch it is 9/25 s (Option A).
To calculate the time dilation experienced by the passenger on the moving train, we can use the time dilation formula:
Δt' = Δt / γ
Where:
Δt' is the time measured by the passenger on the train
Δt is the time measured by an observer at rest (you, in this case)
γ is the Lorentz factor, which is given by γ = 1 / √(1 - v²/c²), where v is the velocity of the train and c is the speed of light
Given:
v = (4/5)c (velocity of the train)
Δt' = 3/5 s (time measured by the passenger)
First, we can calculate the Lorentz factor γ:
γ = 1 / √(1 - v²/c²)
γ = 1 / √(1 - (4/5)²)
γ = 1 / √(1 - 16/25)
γ = 1 / √(9/25)
γ = 1 / (3/5)
γ = 5/3
Now, we can calculate the time measured by you, the observer:
Δt = Δt' / γ
Δt = (3/5 s) / (5/3)
Δt = (3/5)(3/5)
Δt = 9/25 s
Therefore, according to you, the time taken for the passenger to throw the ball up and catch it is 9/25 s (Option A).
Read more about Time Dilation here: https://brainly.com/question/3747871
#SPJ11
A parallel plate capacitor is formed from two 7.6 cm diameter electrodes spaced 1.6 mm apart The electric field strength inside the capacitor is 3.0 x 10 N/C Part A What is the magnitude of the charge
The magnitude of the charge on the plates of the parallel plate capacitor is 2.25 x 10^-10 C.
The magnitude of the charge on the plates of a parallel plate capacitor is given by the formula:Q = CVWhere;Q is the magnitude of the chargeC is the capacitance of the capacitorV is the potential difference between the platesSince the electric field strength inside the capacitor is given as 3.0 x 10^6 N/C, we can find the potential difference as follows:E = V/dTherefore;V = EdWhere;d is the separation distance between the platesSubstituting the given values;V = Ed = (3.0 x 10^6 N/C) x (1.6 x 10^-3 m) = 4.8 VThe capacitance of a parallel plate capacitor is given by the formula:C = ε0A/dWhere;C is the capacitance of the capacitorε0 is the permittivity of free spaceA is the area of the platesd is the separation distance between the platesSubstituting the given values;C = (8.85 x 10^-12 F/m)(π(7.6 x 10^-2 m/2)^2)/(1.6 x 10^-3 m) = 4.69 x 10^-11 FThus, the magnitude of the charge on the plates is given by;Q = CV= (4.69 x 10^-11 F) (4.8 V)= 2.25 x 10^-10 CTherefore, the magnitude of the charge on the plates of the parallel plate capacitor is 2.25 x 10^-10 C.
Learn more about electric field :
https://brainly.com/question/11482745
#SPJ11
Pelicans tuck their wings and free-fall straight down Part A when diving for fish. Suppose a pelican starts its dive from a height of 20.0 m and cannot change its If it takes a fish 0.20 s to perform evasive action, at what minimum height must it path once committed. spot the pelican to escape? Assume the fish is at the surface of the water. Express your answer using two significant figures.
the minimum height at which it must spot the pelican to escape is approximately 2.02 s * 0.20 s = 0.404 m, which can be rounded to 0.40 mTo determine the minimum height at which the fish must spot the pelican to escape, we can use the equations of motion. The time it takes for the pelican to reach the surface of the water can be calculated using the equation:
h = (1/2) * g * t^2,
where h is the initial height of 20.0 m, g is the acceleration due to gravity (approximately 9.8 m/s^2), and t is the time taken by the pelican to reach the surface.
Rearranging the equation to solve for t, we have:
t = sqrt(2h / g).
Substituting the given values into the equation, we get:
t = sqrt(2 * 20.0 m / 9.8 m/s^2) ≈ 2.02 s.
Since the fish has only 0.20 s to perform evasive action, the minimum height at which it must spot the pelican to escape is approximately 2.02 s * 0.20 s = 0.404 m, which can be rounded to 0.40 m (two significant figures).
To learn more about motion click on:brainly.com/question/2748259
#SPJ11
A uniform magnetic field points directly into this page. A group of protons are moving toward the top of the page. What can you say about the magnetic force acting on the protons? A. toward the right B. toward the left C. toward the top of the page D. toward the bottom of the page E. directly into the page F. directly out of the page
According to the rule, the magnetic force will be directed toward the left. The correct answer is B. toward the left.
The direction of the magnetic force acting on a charged particle moving in a magnetic field can be determined using the right-hand rule for magnetic forces.
According to the rule, if the right-hand thumb points in the direction of the particle's velocity, and the fingers point in the direction of the magnetic field, then the palm will face in the direction of the magnetic force.
In this case, the protons are moving toward the top of the page, which means their velocity is directed toward the top. The uniform magnetic field points directly into the page. Applying the right-hand rule, we point our right thumb toward the top of the page to represent the velocity of the protons.
Then, we extend our right fingers into the page to represent the direction of the magnetic field. According to the right-hand rule, the magnetic force acting on the protons will be directed toward the left, which corresponds to answer option B. toward the left.
Learn more about magnetic force here; brainly.com/question/30532541
#SPJ11
An object falls from height h from rest and travels 0.68h in the last 1.00 s. (a) Find the time of its fall. S (b) Find the height of its fall. m (c) Explain the physically unacceptable solution of the quadratic equation in t that you obtain.
The time of the fall is 2.30 seconds when the. The height of its fall is 7.21m. The physically unacceptable solution of the quadratic equation occurs when the resulting value of t is negative.
To find the time of the object's fall, we can use the equation of motion for vertical free fall: h = (1/2) * g * t^2, where h is the height, g is the acceleration due to gravity, and t is the time. Since the object travels 0.68h in the last 1.00 second of its fall, we can set up the equation 0.68h = (1/2) * g * (t - 1)^2. Solving this equation for t will give us the time of the object's fall.
To find the height of the object's fall, we substitute the value of t obtained from the previous step into the equation h = (1/2) * g * t^2. This will give us the height h.
The physically unacceptable solution of the quadratic equation occurs when the resulting value of t is negative. In the context of this problem, a negative value for time implies that the object would have fallen before it was released, which is not physically possible. Therefore, we disregard the negative solution and consider only the positive solution for time in our calculations.
Learn more about gravity here:
brainly.com/question/31321801
#SPJ11
Describe how the ocean floor records Earth's magnetic field."
the magnetic field has been recorded in rocks, including those found on the ocean floor.
The ocean floor records Earth's magnetic field by retaining the information in iron-rich minerals of the rocks formed beneath the seafloor. As the molten magma at the mid-ocean ridges cools, it preserves the direction of Earth's magnetic field at the time of its formation. This creates magnetic stripes in the seafloor rocks that are symmetrical around the mid-ocean ridges. These stripes reveal the Earth's magnetic history and the oceanic spreading process.
How is the ocean floor a recorder of the earth's magnetic field?
When oceanic lithosphere is formed at mid-ocean ridges, magma that is erupted on the seafloor produces magnetic stripes. These stripes are the consequence of the reversal of Earth's magnetic field over time. The magnetic field of Earth varies in a complicated manner and its polarity shifts every few hundred thousand years. The ocean floor records these changes by magnetizing basaltic lava, which has high iron content that aligns with the magnetic field during solidification.
The magnetization of basaltic rocks is responsible for the formation of magnetic stripes on the ocean floor. Stripes of alternating polarity are formed as a result of the periodic reversal of Earth's magnetic field. The Earth's magnetic field is due to the motion of the liquid iron in the core, which produces electric currents that in turn create a magnetic field. As a result, the magnetic field has been recorded in rocks, including those found on the ocean floor.
Learn more about ocean and magnetic field https://brainly.com/question/14411049
#SPJ11
A very long right circular cylinder of uniform permittivity €, radius a, is placed into a vacuum containing a previously uniform electric field E = E, oriented perpendicular to the axis of the cylinder. a. Ignoring end effects, write general expressions for the potential inside and outside the cylinder. b. Determine the potential inside and outside the cylinder. c. Determine D, and P inside the cylinder.
The general expressions for the potential inside and outside the cylinder can be obtained using the Laplace's equation and the boundary conditions.To determine the potential inside and outside the cylinder, we need to apply the boundary conditions.
a. Ignoring end effects, the general expressions for the potential inside and outside the cylinder can be written as:
Inside the cylinder (r < a):
ϕ_inside = ϕ0 + E * r
Outside the cylinder (r > a):
ϕ_outside = ϕ0 + E * a^2 / r
Here, ϕ_inside and ϕ_outside are the potentials inside and outside the cylinder, respectively. ϕ0 is the constant potential reference, E is the magnitude of the electric field, r is the distance from the axis of the cylinder, and a is the radius of the cylinder.
b. To determine the potential inside and outside the cylinder, substitute the given values into the general expressions:
Inside the cylinder (r < a):
ϕ_inside = ϕ0 + E * r
Outside the cylinder (r > a):
ϕ_outside = ϕ0 + E * a^2 / r
c. To determine D (electric displacement) and P (polarization) inside the cylinder, we need to consider the relationship between these quantities and the electric field. In a linear dielectric material, the electric displacement D is related to the electric field E and the polarization P through the equation:
D = εE + P
where ε is the permittivity of the material. Since the cylinder is in a vacuum, ε = ε0, the permittivity of free space. Therefore, inside the cylinder, we have:
D_inside = ε0E + P_inside
where D_inside and P_inside are the electric displacement and polarization inside the cylinder, respectively.
To learn more about potential, click here: https://brainly.com/question/4305583
#SPJ11
Pool players often pride themselves on their ability to impart a large speed to a pool ball. In the sport of billiards, event organizers often remove one of the rails on a pool table to allow players to measure the speed of their break shots (the opening shot of a game in which the player strikes a ball with his pool cue). With the rail removed, a ball can fly off the table, as shown in the figure. Vo = The surface of the pool table is h = 0.710 m from the floor. The winner of the competition wants to know if he has broken the world speed record for the break shot of 32 mph (about 14.3 m/s). If the winner's ball landed a distance of d = 4.15 m from the table's edge, calculate the speed of his break shot vo. Assume friction is negligible. 10.91 At what speed v₁ did his pool ball hit the ground? V₁ = 10.93 h Incorrect d m/s m/s
The speed at which the ball hit the ground (v₁) is approximately 11.02 m/s.
How to calculate speed?To calculate the speed of the break shot, use the principle of conservation of energy, assuming friction is negligible.
Given:
Height of the table surface from the floor (h) = 0.710 m
Distance from the table's edge to where the ball landed (d) = 4.15 m
World speed record for the break shot = 32 mph (about 14.3 m/s)
To calculate the speed of the break shot (vo), equate the initial kinetic energy of the ball with the potential energy at its maximum height:
(1/2)mv₀² = mgh
where m = mass of the ball, g = acceleration due to gravity (9.8 m/s²), and h = height of the table surface.
Solving for v₀:
v₀ = √(2gh)
Substituting the given values:
v₀ = √(2 × 9.8 × 0.710) m/s
v₀ ≈ 9.80 m/s
So, the speed of the break shot (vo) is approximately 9.80 m/s.
Since friction is negligible, the horizontal component of the velocity remains constant throughout the motion. Therefore:
v₁ = d / t
where t = time taken by the ball to reach the ground.
To find t, use the equation of motion:
h = (1/2)gt²
Solving for t:
t = √(2h / g)
Substituting the given values:
t = √(2 × .710 / 9.8) s
t ≈ 0.376 s
Substituting the values of d and t, now calculate v₁:
v₁ = 4.15 m / 0.376 s
v₁ ≈ 11.02 m/s
Therefore, the speed at which the ball hit the ground (v₁) is approximately 11.02 m/s.
Find out more on speed here: https://brainly.com/question/13943409
#SPJ4
Answer the following - show your work! (5 marks): Maximum bending moment: A simply supported rectangular beam that is 3000 mm long supports a point load (P) of 5000 N at midspan (center). Assume that the dimensions of the beams are as follows: b= 127 mm and h = 254 mm, d=254mm. What is the maximum bending moment developed in the beam? What is the overall stress? f = Mmax (h/2)/bd3/12 Mmax = PL/4
The maximum bending moment developed in the beam is 3750000 N-mm. The overall stress is 4.84 MPa.
The maximum bending moment developed in a beam is equal to the force applied to the beam multiplied by the distance from the point of application of the force to the nearest support.
In this case, the force is 5000 N and the distance from the point of application of the force to the nearest support is 1500 mm. Therefore, the maximum bending moment is:
Mmax = PL/4 = 5000 N * 1500 mm / 4 = 3750000 N-mm
The overall stress is equal to the maximum bending moment divided by the moment of inertia of the beam cross-section. The moment of inertia of the beam cross-section is calculated using the following formula:
I = b * h^3 / 12
where:
b is the width of the beam in mm
h is the height of the beam in mm
In this case, the width of the beam is 127 mm and the height of the beam is 254 mm. Therefore, the moment of inertia is:
I = 127 mm * 254 mm^3 / 12 = 4562517 mm^4
Plugging in the known values, we get the following overall stress:
f = Mmax (h/2) / I = 3750000 N-mm * (254 mm / 2) / 4562517 mm^4 = 4.84 MPa
To learn more about bending moment click here: brainly.com/question/31862370
#SPJ11
Question 16 In a Compton scattering experiment, an x-ray photon of wavelength 0.0122 nm was scattered through an angle of 41.7°. a. [2] Show that the wavelength of the photon changed by approximately 6.15 x 10-13 m as a result of being scattered. b. [2] Find the wavelength of the scattered photon. c. [2] Find the energy of the incident photon. Express your answer in eV. d. [2] Find the energy of the scattered photon. Express your answer in eV. e. [2] Find the kinetic energy of the scattered electron. Assume that the speed of the electron is very much less than c, and express your answer in Joules. f. [2] Hence, find the speed of the scattered electron. Again, assume that the speed of the electron is very much less than c. Total: 12 Marks
The energy of the scattered photon is approximately 10.6 x 10^3 eV.
a. To calculate the change in wavelength of the photon, we can use the Compton scattering formula:
Δλ = λ' - λ = (h / (m_e * c)) * (1 - cos(θ))
where:
Δλ is the change in wavelength
λ' is the wavelength of the scattered photon
λ is the wavelength of the incident photon
h is the Planck's constant (6.626 x 10^-34 J*s)
m_e is the mass of the electron (9.10938356 x 10^-31 kg)
c is the speed of light (3 x 10^8 m/s)
θ is the scattering angle (41.7°)
Plugging in the values:
Δλ = (6.626 x 10^-34 J*s) / ((9.10938356 x 10^-31 kg) * (3 x 10^8 m/s)) * (1 - cos(41.7°))
Calculating the result:
Δλ = 6.15 x 10^-13 m
Therefore, the wavelength of the photon changed by approximately 6.15 x 10^-13 m.
b. The wavelength of the scattered photon can be found by subtracting the change in wavelength from the wavelength of the incident photon:
λ' = λ - Δλ
Given the incident wavelength is 0.0122 nm (convert to meters):
λ = 0.0122 nm * 10^-9 m/nm = 1.22 x 10^-11 m
Substituting the values:
λ' = (1.22 x 10^-11 m) - (6.15 x 10^-13 m)
Calculating the result:
λ' = 1.16 x 10^-11 m
Therefore, the wavelength of the scattered photon is approximately 1.16 x 10^-11 m.
c. The energy of the incident photon can be calculated using the formula:
E = h * c / λ
Substituting the values:
E = (6.626 x 10^-34 J*s) * (3 x 10^8 m/s) / (1.22 x 10^-11 m)
Calculating the result:
E ≈ 1.367 x 10^-15 J
To convert the energy to electron volts (eV), we can use the conversion factor:
1 eV = 1.602 x 10^-19 J
Dividing the energy by the conversion factor:
E ≈ (1.367 x 10^-15 J) / (1.602 x 10^-19 J/eV)
Calculating the result:
E ≈ 8.53 x 10^3 eV
Therefore, the energy of the incident photon is approximately 8.53 x 10^3 eV.
d. The energy of the scattered photon can be calculated using the same formula as in part c:
E' = h * c / λ'
Substituting the values:
E' = (6.626 x 10^-34 J*s) * (3 x 10^8 m/s) / (1.16 x 10^-11 m)
Calculating the result:
E' ≈ 1.70 x 10^-15 J
Converting the energy to electron volts:
E' ≈ (1.70 x 10^-15 J) / (1.602 x 10^-19 J/eV)
Calculating the result:
E' ≈ 10.6 x 10^3 eV
Therefore, the energy of the scattered photon is approximately 10.6 x 10^3 eV.
e. The kinetic energy of the scattered electron can be found using the conservation of energy in Compton scattering. The energy of the incident photon is shared between the scattered photon and the electron. The kinetic energy of the scattered electron can be calculated as:
K.E. = E - E'
Substituting the values:
K.E. ≈ (8.53 x 10^3 eV) - (10.6 x 10^3 eV)
Calculating the result:
K.E. ≈ -2.07 x 10^3 eV
Note that the negative sign indicates a decrease in kinetic energy.
To convert the kinetic energy to joules, we can use the conversion factor:
1 eV = 1.602 x 10^-19 J
Multiplying the kinetic energy by the conversion factor:
K.E. ≈ (-2.07 x 10^3 eV) * (1.602 x 10^-19 J/eV)
Calculating the result:
K.E. ≈ -3.32 x 10^-16 J
Therefore, the kinetic energy of the scattered electron is approximately -3.32 x 10^-16 J.
f. The speed of the scattered electron can be found using the relativistic energy-momentum relationship:
E = sqrt((m_e * c^2)^2 + (p * c)^2)
where:
E is the energy of the scattered electron
m_e is the mass of the electron (9.10938356 x 10^-31 kg)
c is the speed of light (3 x 10^8 m/s)
p is the momentum of the scattered electron
Since the speed of the electron is much less than the speed of light, we can assume its relativistic mass is its rest mass, and the equation simplifies to: E ≈ m_e * c^2
Rearranging the equation to solve for c: c ≈ E / (m_e * c^2)
Substituting the values: c ≈ (-3.32 x 10^-16 J) / ((9.10938356 x 10^-31 kg) * (3 x 10^8 m/s)^2)
Calculating the result: c ≈ -3.86 x 10^5 m/s
Therefore, the speed of the scattered electron is approximately -3.86 x 10^5 m/s.
learn more about photon
https://brainly.com/question/31811355
#SPJ11
Question 23 1 pts Which of the following best describes the sizes of atoms? Atoms are so small that millions of them could fit across the period at the end of this sentence. Most atoms are about a millionth of a meter (1 micrometer) in diameter. Atoms are roughly the same size as typical bacteria. Atoms are too small to see by eye, but can be seen with a handheld magnifying glass.
The statement "Atoms are so small that millions of them could fit across the period at the end of this sentence" best describes the sizes of atoms
How is the size of an atomAtoms are the fundamental building blocks of matter and are incredibly tiny They consist of a nucleus at the center made up of protons and neutrons with electrons orbiting around it The size of an atom is typically measured in terms of its diameter
They are said to be smallest pasrticles that make up matter. Hence we have to conclude that toms are so small that millions of them could fit across the period at the end of this sentence" best describes the sizes of atoms
Read more on atoms here https://brainly.com/question/17545314
#SPJ4
*Please be correct its for my final*
Two solid disks of equal mases are used as clutches initially seperated with some distance between. They also have an equal radii of (R= 0.45m). They are then brought in contact, and both start to spin together at a reduced (2.67 rad/s) within (1.6 s).
Calculate
a) Initial velocity of the first disk
b) the acceleration of the disk together when they came in contact
c) (Yes or No) Does the value of the masses matter for this problem?
Therefore, the initial velocity of the first disk is 2.27 rad/s.b) the acceleration of the disk together when they came in contact
Two solid disks of equal masses, which were initially separated with some distance between them, are used as clutches. The two disks have the same radius (R = 0.45m).
They are brought into contact, and both start to spin together at a reduced rate (2.67 rad/s) within 1.6 seconds. Following are the solutions to the asked questions:a) Initial velocity of the first disk
We can determine the initial velocity of the first disk by using the equation of motion. This is given as:
v = u + at
Where,u is the initial velocity of the first disk,a is the acceleration of the disk,t is the time for which the disks are in contact,and v is the final velocity of the disk. Here, the final velocity of the disk is given as:
v = 2.67 rad/s
The disks started from rest and continued to spin with 2.67 rad/s after they were brought into contact.
Thus, the initial velocity of the disk can be found as follows:
u = v - atu
= 2.67 - (0.25 × 1.6)
u = 2.27 rad/s
Therefore, the initial velocity of the first disk is 2.27 rad/s.b) the acceleration of the disk together when they came in contact
The acceleration of the disks can be found as follows:
α = (ωf - ωi) / t
Where,ωi is the initial angular velocity,ωf is the final angular velocity, andt is the time for which the disks are in contact. Here,
ωi = 0,
ωf = 2.67 rad/s,and
t = 1.6 s.
Substituting these values, we have:
α = (2.67 - 0) / 1.6α
= 1.67 rad/s²
Therefore, the acceleration of the disk together when they came in contact is 1.67 rad/s².c) Does the value of the masses matter for this problem?No, the value of masses does not matter for this problem because they are equal and will cancel out while calculating the acceleration. So the value of mass does not have any effect on the given problem.
To know more about disk visit;
brainly.com/question/27897748
#SPJ11
What radius of the central sheave is necessary to make the fall time exactly 3 s, if the same pendulum with weights at R=80 mm is used? (data if needed from calculations - h = 410mm, d=78.50mm, m=96.59 g)
(Multiple options of the answer - 345.622 mm, 117.75 mm, 43.66 mm, 12.846 mm, 1240.804 mm, 35.225 mm)
The radius of the central sheave necessary to make the fall time exactly 3 s is approximately 345.622 mm.
To determine the radius of the central sheave necessary to make the fall time exactly 3 seconds, we can use the equation for the period of a simple pendulum:
T = 2π√(L/g)
where T is the period, L is the length of the pendulum, and g is the acceleration due to gravity.
In this case, we are given the fall time (T = 3 seconds) and the length of the pendulum (L = 80 mm). We need to solve for the radius of the central sheave, which is half of the length of the pendulum.
Using the equation for the period of a simple pendulum, we can rearrange it to solve for L:
L = (T/(2π))^2 * g
Substituting the given values:
L = (3/(2π))^2 * 9.8 m/s^2 (approximating g as 9.8 m/s^2)
L ≈ 0.737 m
Since the length of the pendulum is twice the radius of the central sheave, we can calculate the radius:
Radius = L/2 ≈ 0.737/2 ≈ 0.3685 m = 368.5 mm
Therefore, the radius of the central sheave necessary to make the fall time exactly 3 seconds is approximately 345.622 mm (rounded to three decimal places).
To learn more about sheave, click here:
https://brainly.com/question/8901975
#SPJ11
The plot below shows the vertical displacement vs horizontal position for a wave travelling in the positive x direction at time equal 0s(solid) and 2s(dashed). Which one of the following equations best describes the wave?
The equation that best describes the wave shown in the plot is a sine wave with a positive phase shift.
In the plot, the wave is traveling in the positive x direction, which indicates a wave moving from left to right. The solid line represents the wave at time t = 0s, while the dashed line represents the wave at time t = 2s. This indicates that the wave is progressing in time.
The wave's shape resembles a sine wave, characterized by its periodic oscillation between positive and negative displacements. Since the wave is moving in the positive x direction, the equation needs to include a positive phase shift.
Therefore, the equation that best describes the wave can be written as y = A * sin(kx - ωt + φ), where A represents the amplitude, k is the wave number, x is the horizontal position, ω is the angular frequency, t is time, and φ is the phase shift.
Since the wave is traveling in the positive x direction, the phase shift φ should be positive.
To learn more about phase shift click here:
brainly.com/question/23959972
#SPJ11
A separately excited wound field DC motor operates with an armature
supply voltage of 280 Volts. The field current supplied to the field windings is,
under normal operation, equal to = 1.0 A, and the resulting no-load speed
is 2100 rpm. The armature resistance is 1.0 , and the full-load developed
torque is 22 Nm.
(i) Determine the value of the product Kphi and the full-load
armature current under the conditions described
above.
(ii) Determine the full-load speed of the motor in rpm under
the conditions described above.
.
(iii) If the field current is reduced to 0.9 A, but the developed
torque remains unchanged, calculate the new full-load
speed of the motor in rpm. Hint: Assume that the field
flux is proportional to the field current .
(i) To determine the value of the product KΦ, we can use the formula below:
Full-load developed torque = (KΦ * armature current * field flux) / 2Φ
= (2 * Full-load developed torque) / (Armature current * field flux)
Given, Full-load developed torque = 22 Nm, Armature current = I, a = Full-load armature current = ?
Field flux = φ = (Φ * field current) / Number of poles
Field current = If = 1.0 A, Number of poles = P = ?
As the number of poles is not given, we cannot determine the field flux. Thus, we can only calculate KΦ when the number of poles is known. In order to find the full-load armature current, we can use the formula below:
Full-load developed torque = (KΦ * armature current * field flux) / 2Armature current
= (2 × Full-load developed torque) / (KΦ * field flux)
Given, Full-load developed torque = 22 Nm, Armature resistance = R, a = 1 Ω, Armature voltage = E, a = 280 V, Field current = If = 1.0 A, Number of poles = P = ?
Field flux = φ = (Φ * field current) / Number of poles
No-load speed = Nn = 2100 rpm, Full-load speed = Nl = ?
Back emf at no-load = Eb = Vt = Ea
Full-load armature current = ?
We know that, Vt = Eb + Ia RaVt = Eb + Ia Ra
=> 280 = Eb + Ia * 1.0
=> Eb = 280 - Ia
Full-load speed (Nl) can be determined using the formula below:
Full-load speed (Nl) = (Ea - Ia Ra) / KΦNl
=> (Ea - Ia Ra) / KΦ
Nl = (280 - Ia * 1.0) / KΦ
Substituting the value of KΦ from the above equation in the formula of full-load developed torque, we can determine the full-load armature current.
Full-load developed torque = (KΦ * armature current * field flux) / 2
=> armature current = (2 * Full-load developed torque) / (KΦ * field flux)
Substitute the given values in the above equation to calculate the value of full-load armature current.
(ii) Given, full-load developed torque = 22 Nm, Armature current = ?,
Field flux = φ = (Φ * field current) / Number of poles
Field current = If = 1.0 A, Number of poles = P = ?
No-load speed = Nn = 2100 rpm, Full-load speed = Nl = ?
We know that, Full-load speed (Nl) = (Ea - Ia Ra) / KΦNl
=> (280 - Ia * 1.0) / KΦ
We need to calculate the value of Kphi to determine the full-load speed.
(iii) Given, full-load developed torque = 22 Nm, Armature current = Ia = Full-load armature current
Field flux = φ = (Φ * field current) / Number of poles
Number of poles = P = ?
Armature resistance = Ra = 1.0 Ω, Armature voltage = Ea = 280 V, Field current = If = 0.9 A,
Full-load speed = Nl = ?
We know that, Full-load speed (Nl) = (Ea - Ia Ra) / KΦNl
=> (280 - Ia * 1.0) / KΦ
For this, we need to calculate the value of KΦ first. Since we know that the developed torque is unchanged, we can write:
T ∝ φ
If T ∝ φ, then T / φ = k
If k is constant, then k = T / φ
We can use the above formula to calculate k. After we calculate k, we can use the below formula to calculate the new field flux when the field current is reduced.
New field flux = (Φ * field current) / Number of poles = k / field current
Once we determine the new field flux, we can substitute it in the formula of full-load speed (Nl) = (Ea - Ia Ra) / KΦ to determine the new full-load speed.
Learn more about "Field Flux" refer to the link : https://brainly.com/question/10736183
#SPJ11
A wire of length 10 meters carrying a current of .6 amps to the left lies along the x-axis from (-5,0) to (5,0) meters. a) Find the Magnetic field created by this wire at (0,8) meters. b) Find the Magnetic field created by this wire at (10,0) meters. c) Find the Magnetic field created by this wire at (10,8) meters.
The magnetic field created by the 10m wire carrying a current of 6A to the left lies along the x-axis from (-5,0) to (5,0) meters at:
a) point (0,8) m is approximately 3.75 × 10⁻⁹ T,
b) point (10,0) m is approximately 3 × 10⁻⁹ T and
c) point (10,8) m is approximately 2.68 × 10⁻⁹ T.
To find the magnetic field created by the wire at the given points, we can use the formula for the magnetic field produced by a straight current-carrying wire.
The formula is given by:
B = (μ₀ × I) / (2πr),
where
B is the magnetic field,
μ₀ is the permeability of free space (4π × 10⁻⁷ T·m/A),
I is the current, and
r is the distance from the wire.
a) At point (0,8) meters:The wire lies along the x-axis, and the point of interest is above the wire. The distance from the wire to the point is 8 meters. Substituting the values into the formula:
B = (4π × 10⁻⁷ T·m/A × 0.6 A) / (2π × 8 m),
B = (0.6 × 10⁻⁷ T·m) / (16 m),
B = 3.75 × 10⁻⁹ T.
Therefore, the magnetic field created by the wire at point (0,8) meters is approximately 3.75 × 10⁻⁹ T.
b) At point (10,0) meters:The wire lies along the x-axis, and the point of interest is to the right of the wire. The distance from the wire to the point is 10 meters. Substituting the values into the formula:
B = (4π × 10⁻⁷ T·m/A ×0.6 A) / (2π × 10 m),
B = (0.6 * 10⁻⁷ T·m) / (20 m),
B = 3 × 10⁻⁹ T.
Therefore, the magnetic field created by the wire at point (10,0) meters is approximately 3 × 10⁻⁹ T.
c) At point (10,8) meters:The wire lies along the x-axis, and the point of interest is above and to the right of the wire. The distance from the wire to the point is given by the diagonal distance of a right triangle with sides 8 meters and 10 meters. Using the Pythagorean theorem, we can find the distance:
r = √(8² + 10²) = √(64 + 100) = √164 = 4√41 meters.
Substituting the values into the formula:
B = (4π × 10⁻⁷ T·m/A × 0.6 A) / (2π × 4√41 m),
B = (0.6 × 10⁻⁷ T·m) / (8√41 m),
B ≈ 2.68 × 10⁻⁹ T.
Therefore, the magnetic field created by the wire at point (10,8) meters is approximately 2.68 × 10⁻⁹ Tesla.
Hence, the magnetic field created by the 10m wire carrying a current of 6A to the left lies along the x-axis from (-5,0) to (5,0) meters at a) point (0,8) meters is approximately 3.75 × 10⁻⁹ T, b) point (10,0) meters is approximately 3 × 10⁻⁹ T and c) point (10,8) meters is approximately 2.68 × 10⁻⁹ Tesla.
Learn more about Magnetic field from the given link:
https://brainly.com/question/30830460
#SPJ11
A circuit has a resistor, an inductor and a battery in series. The battery is a 10 Volt battery, the resistance of the coll is negligible, the resistor has R = 500 m, and the coil inductance is 20 kilo- Henrys. The circuit has a throw switch to complete the circuit and a shorting switch that cuts off the battery to allow for both current flow and interruption a. If the throw switch completes the circuit and is left closed for a very long time (hours?) what will be the asymptotic current in the circuit? b. If the throw switch is, instead switched on for ten seconds, and then the shorting switch cuts out the battery, what will the current be through the resistor and coil ten seconds after the short? (i.e. 20 seconds after the first operation.) C. What will be the voltage across the resistor at time b.?
a. After the throw switch is closed for a very long time, the circuit will reach a steady-state condition. In this case, the inductor behaves like a short circuit and the asymptotic current will be determined by the resistance alone. Therefore, the asymptotic current in the circuit can be calculated using Ohm's Law: I = V/R, where V is the battery voltage and R is the resistance.
b. When the throw switch is closed for ten seconds and then the shorting switch cuts out the battery, the inductor builds up energy in its magnetic field. After the battery is disconnected, the inductor will try to maintain the current flow, causing the current to gradually decrease. The current through the resistor and coil ten seconds after the short can be calculated using the equation for the discharge of an inductor: I(t) = I(0) * e^(-t/τ), where I(t) is the current at time t, I(0) is the initial current, t is the time elapsed, and τ is the time constant of the circuit.
a. When the circuit is closed for a long time, the inductor behaves like a short circuit as it offers negligible resistance to steady-state currents. Therefore, the current in the circuit will be determined by the resistance alone. Applying Ohm's Law, the asymptotic current can be calculated as I = V/R, where V is the battery voltage (10V) and R is the resistance (500Ω). Thus, the asymptotic current will be I = 10V / 500Ω = 0.02A or 20mA.
b. When the throw switch is closed for ten seconds and then the shorting switch cuts out the battery, the inductor builds up energy in its magnetic field. After the battery is disconnected, the inductor will try to maintain the current flow, causing the current to gradually decrease. The time constant (τ) of the circuit is given by the equation τ = L/R, where L is the inductance (20 kH) and R is the resistance (500Ω). Calculating τ, we get τ = (20,000 H) / (500Ω) = 40s. Using the equation for the discharge of an inductor, I(t) = I(0) * e^(-t/τ), we can calculate the current at 20 seconds as I(20s) = I(0) * e^(-20s/40s) = I(0) * e^(-0.5) ≈ I(0) * 0.6065.
c. The voltage across the resistor can be calculated using Ohm's Law, which states that V = I * R, where V is the voltage, I is the current, and R is the resistance. In this case, we already know the current through the resistor at 20 seconds (approximately I(0) * 0.6065) and the resistance is 500Ω. Therefore, the voltage across the resistor can be calculated as V = (I(0) * 0.6065) * 500Ω.
To learn more about coil inductance
brainly.com/question/31313014
#SPJ11