find the charge q(t) that crosses the dashed line going from left to right in the time interval (0, t) [s].

Answer:

Step-by-step explanation:

You can use the equations:

x = 2y

where x is the number of $10 bills and y the number of $5 bills and:

10x+5y = 125

Solving gives x=10 and y = 5, or in other words there are 10 $10 bills and 5 $5 bills

Answer:

no more  Fortnight gift cards

Step-by-step explanation:

From the given formulas, formula A is a tautology or always true. Formula B is a contradiction or never true. And, formula C is contingency or sometimes true.

Using the truth table, a given expression is said to be in tautology when all the values are true. The given expression is said to be a contradiction when all the values are false or never true. And the given expression is said to be contingency when the values are either true or false.

In the given formulas, formula A (p→q)∨(q→r) is a tautology. This is because the values in all rows are true (T).

In the given formulas, formula B (¬(¬(p∧q)→(p→¬q))) is a contradiction. This is because the values in all rows are false (F).

In the given formulas, formula C ((¬p∨q)→q) is a contingency. This is because some values are true and some are false.

The complete question is -

Determine whether each of the following formulas is a tautology, contingency, or contradiction (this means always true, sometimes true, never true). Show how you arrived at each answer. Use equivalence-style proofs.

A. (p→q)∨(q→r)

B. ¬(¬(p∧q)→(p→¬q))

C. ((¬p∨q)→q)

To know more about the truth table:

https://brainly.com/question/30221193

#SPJ4

First order approximation = (sin(x+dx)/(x+dx)^3 - sin(x)/x^3)/dx and ((sin(x-(2*dx))/(x-(2*dx))3) is a formula for calculating the fourth-order

Function output for the first order approximation is first order approx (x,dx)

(x3*(cos(x)) analytical derivative =

-sin(x)*3*x^2)/x^6;

First order approximation: % forward differencing = (f(x+dx) - f(x))/dx%

first-order approximation = (sin(x)/x3 - sin(x)/x+dx)/(x+dx)3)/dx;

output is equal to Abs(FirstOrderApproximation - AnalyticalDerivative);

end

Function output for the fourth-order approximation is fourth-order approx (x,dx)

(x3*(cos(x)) analytical derivative =

-sin(x)*3*x^2)/x^6;

((sin(x-(2*dx))/(x-(2*dx))3) is a formula for calculating the fourth-order approximation. 8*(sin(x-dx))/(x-dx) + 8*(sin(x+dx))/(x+dx) - ((sin(x+(2*dx))/(x+(2*dx))3))/(12*dx);

output for the error term is abs(approximation of first order - analytical derivative);

end

Know about first-order approximation

https://brainly.com/question/27931524

#SPJ4

If a plot of the residuals shows a curved pattern, it indicates that a straight line is not a good model for the data. This does not necessarily mean that the correlation between the two variables must be 0 or positive, as the regression line might still be a good model for the data depending on the extent of the curve.

When a least-squares regression line is fit to a set of data, it is used to determine the linear relationship between two variables. If a plot of the residuals (the difference between the observed values and the predicted values from the regression line) shows a curved pattern, it indicates that a straight line is not a good model for the data. This could mean that there is a nonlinear relationship between the two variables or that the data contains outliers that are not accounted for by the regression line. However, it does not necessarily mean that the correlation between the two variables must be 0 or positive, as the regression line might still be a good model for the data depending on the extent of the curve. To determine if the regression line is an accurate model for the data, it is important to visually inspect the plot of the residuals and assess whether the pattern is random or systematic. If the pattern is random, it indicates that the regression line is a good model for the data. If the pattern is systematic, it indicates that the regression line is not a good model for the data and alternative models should be considered.

Learn more about mean here

https://brainly.com/question/15323584

#SPJ4

Duncan's height is closest to the mean.

Duncan (32nd percentile) has a z-score of z = 0.4677 and Shane (62nd percentile) has a z-score of z = 0.3055 when using "Table A" or "normalcy" on a TI calculator. Now that we have the z-score formula, we can create

−0.4677 = (32 − μ)/σ

and

Duncan and Shane are 3-year-old boys. Duncan is 32.0 inches tall and is at the 32nd percentile of the distribution. shane is 34.0 inches tall and is at the 62nd percentile of the distribution.

0.3055 = (34 − μ)/σ

Since the boys' heights fall under the same distribution, it should be noted that and will have the same values in each equation. Consequently, this is a set of linear equations.

Know more about mean

https://brainly.com/question/1136789

#SPJ4

Answer: The slope of the line is 2/3.

The line is not solid, it is dashed.

The area below the line is shaded.

A solution to the inequality is (2,3).

The x-intercept of the boundary line is (-3/2,0)

All the statements except the first one are true about the graph of y< 2/3 x +1.

Step-by-step explanation:

The sequence (3n-2/n)n=1 converges to 1.

To show that (3n-2/n)n=1 converges, we need to find the limit as n approaches infinity.

Using algebraic manipulation, we have the following steps

lim (3n-2/n)n = lim (3-2/n)^n

lim (3n-2/n)n = (3-2/∞)^∞

lim (3n-2/n)n = 1^∞

lim (3n-2/n)n = 1

The basic definition of convergence states that a sequence converges if the limit of the sequence as n approaches infinity is equal to a finite number

Since the limit of (3n-2/n)n as n approaches infinity is 1, we can conclude that the sequence converges to 1.

Read more about sequence at

https://brainly.com/question/29431864

#SPJ1

Ax+by is c is the equation for a line in two dimensions, the equation for a line in three dimensions.

To learn more about equation of the plane refer to:

https://brainly.com/question/30175060

#SPJ1

The function best represents the data in the scatter plot is y = 2x + 20.

The function of the straight line has the general formula: y = mx + c

where m is the slope of the line, and c is the y-intercept

So first, we will need to find the slope (m):

The slope can be calculated with the points (x₁, y₁) and (x₂, y₂) as follows:

m = (y₂ - y₁)/(x₂ - x₁)

= 120 - 60/50 - 20

= 60/30

= 2/1

So, now we have the slope of our equation y = 2x + b but we still need to find b (or where the y intersects.)

Now, consider the ordered pair (20, 60)

y = 2x + b

60 = 2 × 20 + b

b = 60 - 40

b = 20

Now, put the value of b in y = 2x + b, and we get

y = 2x + 20

Also, b can not be -20 because this is a positive y-intercept, and we know it has a slope of 2.

Therefore the function is y = 2x + 20

--The given question is incomplete; the complete question is

"A picture is enlarged by keeping its width the same and increasing its length. The scatter plot below shows the perimeter of the picture (y) for different lengths (x):

Plot the ordered pairs 20, 60 and 30, 80 and 40, 100 and 50, 120 and 60, 140

Which function best represents the data in the scatter plot?

y = 2x − 20

y = 2x + 20

y = x − 20

y = x + 20"--

To know more about scatter plot, here

https://brainly.com/question/29231735

#SPJ4

a) The highway affected the growth of many plant species, which serve as food for the deer. Option D

b) There will be fewer population of the birds. Option C

The carrying capacity of an ecosystem is the maximum number of individuals of a particular species that can be supported by the available resources in that ecosystem.

It is the point at which the population growth rate becomes zero, as the resources needed to sustain the population (such as food, water, and space) become limited. Carrying capacity can change over time due to factors such as climate change, pollution, and human activity.

Learn more about carrying capacity:https://brainly.com/question/797991

#SPJ1

Answer: 20

Step-by-step explanation:

Answer:

[tex] \sf \: 4 \div \frac{1}{5} = 20[/tex]

Step-by-step explanation:

Given problem,

[tex] \sf \rightarrow \: 4 \div \frac{1}{5} [/tex]

Let's solve the problem,

[tex] \sf \rightarrow \: 4 \div \frac{1}{5} [/tex]

[tex] \sf \rightarrow \: 4 \times \frac{5}{1} [/tex]

[tex] \sf \rightarrow \: 4 \times 5[/tex]

[tex] \sf \rightarrow \: 20[/tex]

Hence, the answer is 20.

The G.C.F. of the expression 16n - 24 is evaluated to be 8(2n - 3).

What is an expression?

Mathematical expressions consist of at least two numbers or variables, at least one arithmetic operation, and a statement. It's possible to multiply, divide, add, or subtract with this mathematical operation.

The given expression is - 16n - 24.

The greatest common factor, which is the product of two or more numbers, is the largest number (GCF). A natural number is created by dividing them by the biggest number (factor).

First of all find the G.C.F of 16n and 24 separately.

It can be written that -

16n = 2 × 2 × 2 × 2 × n

24 = 2 × 2 × 2 × 3

The common prime factor between the two is 2 × 2 × 2 = 8.

So, the GCF of 16n and 24 is 8.

Now use the GCF to factor the expression -

= 16n - 24

= 8(2n) - 8(3)

Using the distributive property -

= 8(2n) - 8(3)

= 8(2n - 3)

Therefore, the GCF value is 8(2n - 3).

To learn more about expression from the given link

https://brainly.com/question/24734894

#SPJ1

The ratio of two screws written in three different forms are,

2.5 : 1.5, 5 : 3 and 1.5/2.5.

A ratio is a comparison between two similar quantities in simplest form.

Proportions are of two types one is the direct proportion in which if one quantity is increased by a constant k the other quantity will also be increased by the same constant k and vice versa.

In the case of inverse proportion if one quantity is increased by a constant k the quantity will decrease by the same constant k and vice versa.

Given, Two screws are in the ratio of 1.5 inches and 2.5 inches.

It can be written as 2.5 : 1.5

It can also be written as 2.5×10 : 1.5×10 = 25 : 15 = 5 : 3.

It can also be written as a fraction as, 1.5/2.5.

learn more about proportion here :

https://brainly.com/question/7096655

#SPJ1

A figure has rotational symmetry when it can be rotated by an angle measure which is greater than 0º and less than 360º and the rotated image is equals to the original figure, that is, the image is equals to the pre-image.

The square has four sides, hence:

360/4 = 90º.

The other figure has three sides, which are similar, hence:

360/3 = 120º.

More can be learned about rotational symmetry at brainly.com/question/11090800

#SPJ1

Step-by-step explanation:

the sum of the area of the inner rectangle and the area of the 2 outer half-circles (that together are the area of one full circle).

the radius of the circles is 10 ft.

so, the diameter (= the width of the inner rectangle) = 2×10 = 20 ft.

so, the area of the inner rectangle is

30×20 = 600 ft²

the area of the combined full circle is

pi×r² = pi×10² = 100pi = 314.1592654... ft²

together that is

914.1592654... ft²

The number of kilometers that Darlene runs is given as follows:

2.4 kilometers.

The distance that Darlene runs is obtained applying the proportions in the context of the problem.

The proportion is applied to convert the mixed number to decimal, adding the integer part to the division of the numerator by the denominator.

The distances are given as follows:

Hence the total distance is of:

1 + 1.4 = 2.4 km.

She ran 1 km in the morning.

More can be learned about proportions at https://brainly.com/question/24372153

#SPJ1

Answer:

the slope is -1/3 and the coordinates are (0,-6) and (3,-7). Below is a picture of the equation graphed.

Step-by-step explanation:

The system of linear equations 4 · y - 12 · x = 3 and y + 3 · x = 1 has the following solution: (x, y) = (1 / 24, 7 / 8)

In this question we find the case of a system of two linear equations with two variables, this case may have an unique solution. This system can be solved by algebraic properties.

First, write the system of linear equations:

4 · y - 12 · x = 3

y + 3 · x = 1

Second, clear y in the second equation:

y = 1 - 3 · x

Third, substitute in the first equation:

4 · (1 - 3 · x) - 12 · x = 3

Fourth, expand the expression and clear variable x:

4 - 12 · x - 12 · x = 3

4 - 24 · x = 3

24 · x = 4 - 3

24 · x = 1

x = 1 / 24

Fifth, determine the value of variable y:

y = 1 - 3 · (1 / 24)

y = 1 - 1 / 8

y = 7 / 8

The solution to the system of linear equations 4 · y - 12 · x = 3 and y + 3 · x = 1 is (x, y) = (1 / 24, 7 / 8).

The statement reports several typing mistakes. The system of linear equations is shown below:

4 · y - 12 · x = 3

y + 3 · x = 1

To learn more on systems of linear equations: https://brainly.com/question/20379472

#SPJ1

Answer:

Step-by-step explanation:

the answer is 69

Answer:yes

Step-by-step explanation:

The Angle-Side-Angle Postulate (ASA) states that if two angles and the included side of one triangle are congruent to two angles and the included side of another triangle, then the two triangles are congruent.

Here we see two sides being congruent and one angle, this means that the other angles are also congruent, as only one triangle can be formed with two set sides and an angle. therefore we know both triangles are congruent

Answer: 720

Step-by-step explanation:

You can assess normality of data using D. Pearson's Measure of Normality

Pearson's Measure of Normality, also known as Pearson's Test for Normality, is a statistical test that is used to assess whether a set of data is normally distributed.

It is based on the skewness and kurtosis of the data, and it provides a p-value which indicates the probability that the data is from a normal distribution. Pearson's test is considered as one of the most common statistical test used to check normality of data.

Find out more on normality of data at https://brainly.com/question/28475676

#SPJ1

The full question is:

You can assess normality of data using A. Pearson's Index of Skewness B. Pearson's Test C. Pearson's p-value D. Pearson's Measure of Normality

a. (-1,5) is on the parabola

b. (1,7) is NOT on the parabola

c. (3,9) is NOT on the parabola

a. (-1,5)

The distance from the point (-1,5) to the focus (-1,6) is sqrt((-1-(-1))^2 + (5-6)^2) = sqrt(0+1) = 1

The distance from the point (-1,5) to the directrix y=4 is the absolute value of the y-coordinate of the point - the y-coordinate of the directrix = abs(5-4) = 1

Since the distances are equal, the point (-1,5) is on the parabola.

b. (1,7)

The distance from the point (1,7) to the focus (-1,6) is sqrt((1-(-1))^2 + (7-6)^2) = sqrt(2^2 + 1^2) = sqrt(5)

The distance from the point (1,7) to the directrix y=4 is the absolute value of the y-coordinate of the point - the y-coordinate of the directrix = abs(7-4) = 3

Since the distances are not equal, the point (1,7) is not on the parabola.

c. (3,9)

The distance from the point (3,9) to the focus (-1,6) is sqrt((3-(-1))^2 + (9-6)^2) = sqrt(4^2 + 3^2) = sqrt(16+9) = sqrt(25)

The distance from the point (3,9) to the directrix y=4 is the absolute value of the y-coordinate of the point - the y-coordinate of the directrix = abs(9-4) = 5

Since the distances are not equal, the point (3,9) is not on the parabola.

Read more about parabolas here:

https://brainly.com/question/25651698

#SPJ1

In this case, there are 8 letters, so the total number of 4-letter words possible is 8^4 = 4096.

(b) In this case, each letter can be used only once, so we must choose 4 different letters out of 8 letters. This can be done using the combination formula C(8,4) = 70.

(c) Since each word must begin with the letter A, the remaining 3 letters must be chosen from the remaining 7 letters. This can be done using the combination formula C(7,3) = 35.

(d) The letter C must be at the end, so the first 3 letters must be chosen from the remaining 7 letters. This can be done using the combination formula C(7,3) = 35.

(e) The second letter must be a vowel, so the first letter can be chosen out of 4 letters (A, E, I, O). The remaining 3 letters can be chosen out of 7 letters. This can be done using the combination formula C(4,1) x C(7,3) = 140.

Learn more about combination here:

https://brainly.com/question/20211959

#SPJ4

The different combinations of the five-digit number formed are enough to create ID numbers.

What is meant by combinations?

Combinations are ways to choose elements from a collection in mathematics where the order of the selection is irrelevant.

We first find the total number of 5-digit enrollment IDs that can be created using all possible combinations of numbers possible.

Since each digit of the five-digit number can be from 0-9, there are ten possible values for each digit.

So the total number of ways a five-digit number can be formed

= 10*10*10*10*10 = 100,000

For the given question, it is mentioned that only 75,000 students are expected to be enrolled in the next ten years,

Since 100,000 is greater than 75,000 the five-digit ID number will be enough.

But if the school is to last longer than ten years, it is safe to use a six or seven-digit ID number.

Therefore a five-digit Id number using symbols from 0-9 will be enough.

To learn more about combinations, follow the link.

https://brainly.com/question/28065038

#SPJ1

Use the data to create a stemplot.

Twenty-four workers were surveyed about how long it takes them to travel to work each day. The data below are given in minutes.

20 35 42 52 65 20 60 49 24 37 23 24

22 20 41 25 28 27 50 47 58 30 32 48

The data in a stem-and-leaf plot:

3/0257

2/0002344578

4/12789

5/028

6/05

Another presentation that is similar to a histogram is a stemplot. In statistics, a stemplot is a tool for presenting quantitative data in a graphical format, similar to a histogram, namely to assist in visualizing the shape of the data distribution which is often used in exploratory analysis. Stemplots were introduced by Arthur Bowley in the early 1900's. However, its general use only began in 1980 after John Tukey's published Exploratory Data Analysis in 1977.

Stem-and-leaf plots provide more information about true values than histograms. As in a histogram, the length of each bar corresponds to the number of events that fall into a given interval. On Histograms. we can only see the frequency value of the data but we don't know what the actual number value is. In contrast to the histogram, in SLP besides we can know the frequency value, we can also know what the actual data value is. This is done by dividing the observed values into two components, stem and leaf.

Learn more about stemplot at

https://brainly.com/question/29433270.

#SPJ4

According to the social class model developed by Gilbert and Kahl, and based on the theory of Weber, the upper (capitalist) class of the United States includes about b) 1 percent of the population.

In the United States, the upper class, or capitalist class, is estimated to comprise about 1 percent of the population.

This is according to the social class model developed by Gilbert and Kahl, which is based on the theory of Weber.

This model suggests that the upper class is made up of those who own the majority of the nation's wealth and power, and are thus able to influence governmental decisions.

While the upper class may be small in size, it is highly influential and its members often have the resources to enact large-scale change.

To learn more about United States, click here:

https://brainly.com/question/1527526

#SPJ4