Factoring of integers. Write a python program that asks the user for an integer and then prints out all its factors. For example, when the user enters 150, the program should print 2 3 5 5.
This is just a pseudocode for visual:
Get a value from user Print
"The factors are: "
Keep going while the value is greater than 1
Start the divisor at 2 A factor has not been found Keep going until a factor is found
If the value is evenly divisible by the divisor
A factor has been found
Print the divisor Change value to equal value / divisor.
You have now found a factor you want to see if there are factors in the remaining part of the number.
FYI: For instance if the number is 100, your first factor would be 2 and on our second time through you would need to see if there are factors of 50. This would result in another factor of 2 in the third pass and looking for factors of 25. This would result in a factor of 5 in the fourth pass and looking for factors of 5. This would result in value finally = 1 so you are done. If I enter 175, I would see 5, 5, and 7 as my results. Increment the divisor so you can see if the next number is a factor. This statement is not necessary if a factor is found, but it does not matter if it is executed because you will fall out of the inside nested if and reset the divisor to 2 if you come back in.

Answers

Answer 1

num = int(input("Enter a number: "))

i = 2

while num > 1:

   if num % i == 0:

       num = num / i

       print(i, end=" ")

       i = 2

   i += 1

I hope this helps!


Related Questions

Which of the following situations is least likely fair use

Answers

Answer:

Is there more to the question or is that it?


Where are the situations??

g You and your friend both send documents to the printer, but the printer can only print one document at a time. What does it do with the other document

Answers

Answer:

It places the document in a buffer

Explanation:

Since the printer can only print a document at a time, the other document is going to be placed in a buffer.

The print buffer can be described as a location in memory that has the function of holding data that is going to be sent to a computers printer. A print job such as in this scenario may remain in the buffer because another document is to be printed first.

Sometimes a document could be put in the buffer because the computer is waiting for the printer to respond. This is just another reason why documents are placed in a buffer.

What is payload?
a block of data inside the packet
a block of data transmitted across a network
the maximum amount of data a network can transmit
a 32-bit numeric address

Answers

Answer:

a block of data inside the packet

Write a script that inputs a line of plaintext and a distance value and outputs an encrypted text using a Caesar cipher.
The script should work for any printable characters. An example of the program input and output is shown below:
Enter a message: Hello world!
Enter the distance value: 4
Output: Lipps${svph%

Answers

Answer:

def encrypt_text(text,value):

   encoded = ""

   for i in range(len(text)):

       char = text[i]

       if (char.isupper()):

           encoded += chr"po"ord'po'char'pc' + value -65'pc' % 26 + 65'pc'

       else:

           encoded += chr'po'ord'po'char'pc' + value -97'pc' % 26 + 97'pc'

   return encoded

plaintext = input("Enter sentence of encrypt: ")

dist_value = int(input("Enter number: "))

encrypted = encrypt_text(plaintext, dist_value)

print(encrypted)

Explanation:

The python program above is a Ceasar cipher implementation. The encrypt_text function is defined to accept text input and a distance value, which is used to encrypt the plaintext.

The user can directly input text and the distance value from the prompt and get the encrypted text printed on the screen.

What is something about online conferencing that you understand better now.
What did you learn?

Answers

Answer:

man this question is really about your personal experience but i'll try my best to answer this

Explanation:

onnline Web Conferencing is used by businesses and now schools who went to online because of the virus. for businesses i learned they use it to present and share with online collaboration on different applications including documents, web sites, data files, video, emails, and reduce the time and cost of business travel for meetings. i understand now that online conferencing can be used for Applications for web conferencing include meetings, training events, lectures, or presentations from a web-connected computer to other web-connected computers.

The Electronic Age began in the
A. 1940s
B. 1970s
C. 1980s
D. 1990s

Answers

Answer:

1940

Explanation:

B:1940s,
Explanation can I have brainiest

how has the Internet of Things affected business​

Answers

Internet of Things devices can be connected to each other and controlled to improve efficiency,which in turn has direct effects on the productivity of the business. Hope this helps!

Answer:

Business equipment can be continually adjusted based on analysis of data

Explanation:

A P E X

Who wants to play nitro type with me. My user is thievesGuildcuu

Answers

Answer:

I can

Explanation:

Answer:

Sure.

My user Name is: Queen Void.

Help me! I’ll mark you brainly and give extra points!

Answers

Answer:

52 5,

Explanation:

Define a function print_total_inches, with parameters num_feet and num_inches, that prints the total number of inches. Note: There are 12 inches in a foot.

Sample output with inputs: 5 8

Answers

I wrote my code in python 3.8:

def print_total_inches(num_feet, num_inches):

   return ((num_feet)*12) + num_inches

print("There are a total of {} inches".format(print_total_inches(5,8)))

I hope this helps!

if you make homemade knitted garments and you sell them to individuals online, what e-commerce are you participating in?
is it B2B or B2C or C2C or SaaS

Answers

The Answer Of This Question Is C2C.

Write a python application to simulate a Password Storage and Management system. The purpose of this assignment is to gain experience in python loop (while and for) structure, condition structure, sequence, and basic I/O.

Answers

Answer:

Explanation:

Udueuheyeheehhehehehejjejejejehebbevevsvevebebehehh

The standard library for Python includes modules for storing and retrieving serialized data in a number of different data structures, including JSON and XML. A standardized method of working with relational databases is offered by Python's DB-API.

What application of python to Storage and Management?

Python's ability to swiftly generate and maintain data structures is one of its most popular applications; Pandas, for example, provides a wealth of tools to modify, analyze, and even depict data structures and complex datasets.

It will be easier to debug memory problems and create memory-efficient apps if you have a superpower for memory management. Join Rupesh Mishra for a thorough examination of CPython's inner workings.

Therefore, Python stores all of its objects and data structures in a private heap that it utilizes to manage memory. The internal management of this private heap is the responsibility of the Python memory manager.

Learn more about python here:

https://brainly.com/question/3533553

#SPJ5

Why would an information systems security practitioner want to see network traffic on both internal and external network traffic?

Answers

Answer:

To see who is accessing data and also where it is going

Explanation:

An information systems practitioner is a person who is involved in the planning and and also implementation of IT resources for any organization which he at she works.

The information systems practitioner would want to want to see network traffic on both internal and external network traffic so as to know who is accessing data and to also know where it is going.

Why is it useful to teach Karl new commands

Answers

Answer:

It's important to teach karl more commands so karl can do more tasks and create more complex algorithms

Explanation:

it’s useful because they would know what to do when you say something . example of you say turn left they would not know what to do because they have not been taught . that’s why you should teach them new commands .

Write a multi-way if statement that compares the double variable pH with 7.0 and makes the following assignments to the bool variables neutral, base, and acid:

Answers

Answer:

try:

   pH = float(input("Enter number between 0 to 14: "))

except ValueError:

   print("input must be a number")

if pH < 7:

   print("pH is Acidity")

elif pH == 7:

   print("pH is neutral")

else:

   print("pH is Base/alkaline")(

Explanation:

The try and except statement is used to check if the input is a number, if its not, the print statement is displayed. The nested if statement compares the pH input to know if it is an acid, base or neutral.

A database has one physical schema and one conceptual (logical) schema but many external schemas (views).
a) True
b) False

Answers

Answer:

true

Explanation:

A database has one physical schema and one conceptual (logical) schema but many external schemas (views): a. True.

A database refers to a structured (organized) collection of data that are stored on a computer system and usually accessed in various ways such as electronically.

In database management, a database schema can be defined as a structure which is typically used to represent the logical design of the database. Thus, it denotes how data are stored (organized) and the relationships existing in a database management system (DBMS).

Generally, there are two (2) main types of a database schema and these include;

Physical database schema: it is only one per database.Conceptual (logical) schema: it is only one per database.

However, there are multiple number of external schemas (views) for each database because it is what an end user is interested in.

Read more on database here: https://brainly.com/question/3259292

Create a new program with a struct, Data, that contains: an int a char[80] Write a function newData(char[]), that takes char[] as a parameter

Answers

Answer:

#include <iostream>

#include <cstring>

using namespace std;

struct Data {

   int userId;

   char name[80];

}

void newData(string data char[]){

   int counts= 0;

   struct Data name;

   data.userId = ++counts;

   data.name = char[];

   cout<< data.userId << "\n"<< data.name ;

}

int main( ) {

   char myName;

   string mydata;

   cin>> myName;

   cin>> mydata;

   newData( myName, mydata);

}

Explanation:

The c++ source code above stores its data in a struct called "Data". The function newData dynamically creates new data from the struct defined.

Write the definition of a function that takes as input three numbers. The function returns true if the floor of the product of the first two numbers equals the floor of the third number; otherwise it returns false. (Assume that the three numbers are of type double.) (4)

Answers

Answer:

Written in C++

bool checkfloor(double num1, double num2, double num3) {

   if(floor(num1 * num2) == floor(num3)){

       return true;

   }

   else {

       return false;

   }

}

Explanation:

The function written in C++

This line defines the function

bool checkfloor(double num1, double num2, double num3) {

The following if condition checks if the floor of num1 * num2 equals num3

   if(floor(num1 * num2) == floor(num3)){

       return true; It returns true, if yes

   }

   else {

       return false; It returns false, if otherwise

   }

}

See attachment for full program including the main

There is no danger of data collision with this topology.

bus
mesh
ring
star

Answers

Answer:

ring

Explanation:

The Answer


C.Ring

This is evident beacause I am your advisor and I made that test so

Which input value causes the loop body to execute a 2nd time, thus outputting "In loop" again? { String s = "Go"; while ((!s.equals("q"))&& (!s.equals("")) System.out.println("In loop"); 5 - scnr.nextO;
a) "Quit"
b) "q" only
c) "Q only
d) Either "q" or "Q"

Answers

Answer:

a) "Quit"  

c) "Q only

Explanation:

Given

String s = "Go";

while ((!s.equals("q"))&& (!s.equals("")))  {

System.out.println("In loop");

s = scnr.next();

}

Required

What input causes another execution

Analyzing the while condition

while ((!s.equals("q"))&& (!s.equals("")))  

This can be split into:

!s.equals("q")) && (!s.equals(""))

Meaning

When s is not equal to "q" and when s is not an empty string

In other words,

the loop will be executed when user input is not "q" and user input is not empty.

So, from the list of given options: The loop both will be executed when:

a) Input is "Quit"

c) Input is Q only

Input of q will terminate the loop, hence b and d are incorrect

a rectangle is 12 cm long and 9 cm wide.Its perimeter is doubled when each of its sides is increased by a fixed length.what is the length?​

Answers

Answer:

length = 12 cm

breadth = 9 cm.

perimeter of rectangle = 2( l+b)

= 2(12+9) = 2(21) = 42cm.

New length = (12+x) cm

New breath = (9+x) cm

2(12+x+9+x) = 42×2

2(21+x) = 84

21+ x = 84/2

21+x = 42

x= 42-21= 21

x= 21.

Therefore, length = (12+x)cm

=( 12+21) cm = 33cm.

Explanation:

Firstly we have written the length and breadth of the rectangle.

And the perimeter of rectangle i.e. 2(l+b)

Then, as it is in question we have doubled the perimeter

And at last, we have got the value of x.

and by putting the value in the new length we will get our answer.

hope you have got your answer dear.

How do I charge my ACDC Halo bolt?

Answers

Answer:

To recharge your HALO Bolt, using the provided AC wall adapter cable, plug the AC adapter tip into the charger's charge input DC 20V/0.6A port. Next, connect the AC adapter into a wall outlet. Your HALO Bolt will automatically begin charging. Charge your HALO Bolt for a full eight hours.

Explanation:

This is my paragraph

. The type of color is ude in this code line is ..............................

Answers

What is the paragraph even supposed to be about

20 pts, please write in JAVA. need this ASAP
In the Lesson Slides for this activity, we developed a method findChar for figuring out if a character was in a String.

The implementation was:

public boolean findChar(String string, String key)
{
for(int index = 0; index < string.length(); index++)
{
String character = string.substring(index,index+1);
if(character.equals(key))
{
return true;
}
}
return false;
}
However, there is a much more efficient and simple algorithm that we can use to determine if a character is in a String. Using the method signature public boolean findChar(String string, String key), figure out a more efficient method with a lower exection count.

Hint: We’ve learned a couple of methods that can tell us what index a character is at - can we use those to determine if the character is in a String?

Answers

public class JavaApplication78 {

   public boolean findChar(String string, String key){

       if (string.contains(key)){

           return true;

       }

      return false;

   }

   public static void main(String[] args) {

       JavaApplication78 java = new JavaApplication78();

       System.out.println(java.findChar("hello", "h"));

   }

   

}

First I created the findChar method using the contains method. It checks to see if a certain sequence of characters is in another string. We returned the result. In our main method, we had to create a new instance of our main class so we could call our findChar method.

which of the following events happen first
web 2.0 had evolved
ARPANET was developed
The world wide web was created
Email was invented

Answers

Answer:

Hey! The answer your looking for is ARPANET:)

Explanation:

Answer:

ARPANET was developed

Explanation:

Shrink-wrap, box-top, and click-wrap agreements are inherent to e-commerce. How you feel about them often depends on whether you are the vendor or purchaser. What are the best practices to assure shrink-wrap, box-top, and click-wrap agreements are legal? What are the best ethical practices that the e-commerce industry should adopt?

Answers

Answer:

Shrink-wrap, Box-top, and Click-wrap Agreements

a) The best practices to assure that shrink-wrap, box-top, and click-wrap agreements are legal include  

1) having e-commerce terms and conditions separate from the normal trade terms and conditions,  

2) ensuring that customers agree to the terms before entering into a transaction, and  

3) laying the code of conduct for all visitors interacting with your site or doing any business transaction on your site.

b) The best ethical practices that the e-commerce industry should adopt are:

1) Put additional layers of protection like a web application firewall to their websites.  

2) Ensure they always adhere to PCI (Payment Card Industry) compliance guidelines.

3) They should not store customers' data which they do not need.

4) Ensure privacy and security of customers' data.

5) Establish trust by safeguarding intellectual property rights.

6) Consider some environmental issues (customers care about them).

Explanation:

a) Websites' Terms and Conditions (T&C) establish some form of legal contract between the organization and its clients.  

b)To ensure that organizations that process, store, or transmit credit card information maintain secure online environment, they are required to comply with PCI DSS.  It is a set of Payment Card Industry requirements for all organizations involved in the use of online cards for payment for their goods and services.

What is the role of CPU in the computer system?

Answers

Answer:

role of cpu in computer is ut is a brain nd a power point if a computer

Explanation:

It helps of shut down and open it

Answer:

CPU is considered as the brain of the computer. CPU performs all types of data processing operations. It stores data, intermediate results, and instructions (program). It controls the operation of all parts of the computer.

Using complete sentences post a detailed response to the following.

What are the advantages and disadvantages of top-down and bottom-up programming? How would you decide which one to use? Do you approach problems in your real life from a bottom-up or top-down approach?

Answers

Answer:

some advantages of top down is that you can start off from what you know and figure out what you need to complete it, advantages to bottom up is that you can make something new . if you are starting something from scratch and you dont know what the end goal might be you would use bottom up but if you already have an idea or the final product of what you want you would go the top down approach.

Explanation: just saying you shouldnt just copy and paste my response but rather pick out what you want to say and use this to complete what ever your working on. hope i helped :)

Answer:

the guy on top of me is super right follow him

Explanation:

PLzzzzzz help me!! I will mark brainiest to the one who answers it right!!
Answer it quickly!!

Write a pseudo code for an algorithm to center a title in a word processor.

Answers

Answer: abstract algebra

Explanation: start with the algorithm you are using, and phrase it using words that are easily transcribed into computer instructions.

Indent when you are enclosing instructions within a loop or a conditional clause. ...

Avoid words associated with a certain kind of computer language.

Answer:

(Answers may vary.)

Open the document using word processing software.

In the document, select the title that you want to center. The selected word is highlighted.

On the Menu bar, select the Format tab.

In the Format menu, select Paragraph.

The Paragraph dialog box opens with two sub tabs: Indents and Spacing, and Page and Line Breaks. The first tab is selected by default.

Adjust the indentation for the left and right side. Ensure that both sides are equal.

Preview the change at the bottom of the dialog box.

Click OK if correct, otherwise click Cancel to undo changes.

If you clicked OK, the title is now centered.

If you clicked Cancel, the title will remain as it is.

Explanation:

I took the unit activity

Write code which takes a sentence as an input from the user and then prints the length of the first word in that sentence.
Hint: think about how you know where the first word ends - you may assume that the sentence contains more than one word.
Input a code in the following:
/* Lesson 3 Coding Activity Question 4 */
import java.util.Scanner;
public class U2_L3_Activity_Four{
public static void main(String[] args){
/* Write your code here */
}
}

Answers

import java.util.Scanner;

public class U2_L3_Activity_Four {

   public static void main(String[] args) {

       Scanner scan = new Scanner(System.in);

       System.out.println("Enter a sentence.");

       String sent = scan.nextLine();

       int count = 0;

       for (int i = 0; i < sent.length(); i++){

           char c = sent.charAt(i);

           if (c != ' '){

               count++;

       }

           else{

               break;

           }

       

   }

       System.out.println("The first word is " + count +" letters long");

   

   }

}

We check to see when the first space occurs in our string and we add one to our count variable for every letter before that. I hope this helps!

Following are the java code to the given question:

import java.util.Scanner;//import package

public class U2_L3_Activity_Four //defining a class U2_L3_Activity_Four

{

  public static void main(String[] args) //defining main method

  {

      String s;//defining String variable

      int x,v=0;//dclaring integer variable x,v

      Scanner obx = new Scanner(System.in);//creating Scanner class Object

      System.out.println("Enter a sentence.");//print message

      s = obx.nextLine();//input string value

      for (x = 0; x < s.length(); x++)//defining loop to count string length

      {

          char c = s.charAt(x);//defining char variable that hold char value

          if (c != ' ')//defining if that check space value

          {

              v++;

          }

      }

      System.out.println("The first word is " + v +" letters long");//print length of first word

  }

}

Output:

Please find the attached file.

Program Explanation:

Import package.Defining a class U2_L3_Activity_Four, inside the class main method is declared.Defining a string variable "s" and an integer variable "x,v=0", and a scanner class object is created that inputs string value.In the next step, a for loop is defined that checks the first word in the string value and prints its length value.

Learn more:

brainly.com/question/16092924

Other Questions
Which best describes how the excerpt appeals to readers emotions? What is the length of segment AC? A function is negative over the intervals{x 1-0 What are the zeros for the function?3-3,3-3 In order to change a solid to a liquid or a liquid to a gas, what is needed?A high boiling pointAn increase in thermal energyA high melting pointA decrease in thermal energyHide hint for Question 9 jenet can make 4/5 on a necklace in 20 minutes.at this rate how many necklaces to the nearest tenth of a necklace can jenet make in 1 hour Chloe prepared 28 kilograms of dough after working 7 hours. How much dough did Chloe prepare if she worked for 8 hours? Assume the relationship is directly proportional. teddy Roosevelt espoused a very imperialistic foreign policy, and yet fought against monopolies at home. we're his foreign policy and domestic policy at the odds with each other? Which was a main reason for creating the Articles of Confederation? why are 6, 8, 10, 5, 12, 13 the pythagorean triples can someone help please!? Help with this math thing please! What did classical Greece contribute to modern Western civilization?A. abolition of slaveryB. women's suffrageC. monotheistic religionD. democratic government 10 (254) = Please Jenna has a piece of paper that is 99 3/4 square inch in Area.It is 10 1/2 inches long.What is the width of the piece of paper in inches? kal do i see you brother? plato banned certain songs because he don't approve of the instruments that were used pls help i missed the video and cant find it Determine whether the given equation has one solution, no solution, or infinitely many solutions.2 - 3(x + 4) = 3(3 - x)cannot be determinedone solutionno solutioninfinitely many solutions What is going on in the United States in the 1820s that would give Monroe the confidence to establish the Monroe Doctrine? (I WILL GIVE 30 POINTS PLEASE HELP ME)1. Which is the slope of the line that passes through the points (1,1) and (2,7) ?1a. Pick a point the line passes through above and with the slope you calculated, find the y- intercept 1b. Now that you know the y- intercept, what is the equation of the line ?