Answer:
Yayyyyyy thank you ≥﹏≤.!!!!!!!!!!!!!
Which of the following has the most momentum? proton (m=1.67 x 10-27 kg) moving at 2.0 x 104 m/s,an electron (m=9.11 x 10-31 kg) moving at 2.0 x 106 m/s, a common house fly (m=12 mg) moving at 2.0 m/s, North American tectonic plate (m≈5x1022 kg) moving at 3.0x10-10 m/s (about 1cm/yr)
Answer:
The North American tectonic plate.
Explanation:
recall the formula for momentum: p = m * v
the subatomic particles have very small masses while high speeds, so the product results in values with negative exponents in scientific notation.
Negative exponents also result for the house fly when converting mg into kg (10^-6).
The positive exponents in scientific notation for the momentum come for the gigantic mass of the continental plate which exceeds the negative exponents contributed by the small velocity.
Assume that it takes an average of 3 man-hours to stack 1 ton of a particular item. In order to stack 36 tons in 6 hours, the number of people required is:______.
A) 9
B) 12
C) 15
D) 18
E) 21
Answer:
option (d)
Explanation:
Given,
1 ton of a particular item can be stack in= 3 man-hours
36 ton of a particular item can be stack in= 36 x 3 man-hours
= 108man- hours
Number of hours = 6 hours
Number of people = [tex]\frac{108 \text{man-hours}}{6}[/tex]
= 18
Hence, the number of people required is 18.
Therefore, option (d) is correct.
The x-axis of a position-time graph represents
Answer:
The y-axis represents position relative to the starting point, and the x-axis represents time.
Explanation:
what is the average gravitational force of attraction between the earth and the sun? the earth averages a distance of about 150 million km. the earth has a mass of 5.97x10^24 kg, and the sun has a mass of about 2x10^30 kg.
Answer:
B
Explanation:
Hhhhh
"When the ball leaves the ramp at Point B, students measure the horizontal" distance traveled. They repeat the experiment five times, being careful to release the ball from the same starting Point A and find the average horizontal distance traveled to be 2.0 m. One student suggests they use a stopwatch to find the time the ball is in the air whereas another student suggests they use a meter stick. Given these materials, describe the procedure students should follow to minimize error and calculate the speed of the ball as it leaves the ramp.
Answer:
Speed of ball as it leaves ramp is 2 m/s
Explanation:
From the question it is given that the average distance traveled by ball from point A to B is 2.0 m and the time taken is 1sec
one student is using stopwatch to calculate the time taken by ball and another student is using meter stick to calculate the distance traveled
since speed of ball is given by v = [tex]\frac{distance}{time}[/tex] thus,
the speed = 2 m/s
now for minimizing the error of speed it is necessary to record the readings by single students at-least 5 times and take average
by doing this, the error of speed calculation will be minimum as the it decreases the error due to random error of system caused by taking the reading by different students
Revolution + tilt = what
Unit Test
Active
11
12
13
14
15
TIME REMAININO
01:47:35
Which best describes the energy of a sound wave as it travels through a medium?
It increases
It decreases
It remains the same
It depends on the medium
Answer:
It depends on the medium is answer.
Explanation:
I hope it's helpful!
The energy of sound waves depends on the nature of medium it travels through. As the speed of the wave increases in the medium its energy increases. Hence, option d is correct.
What are sound waves ?Sound waves are type of mechanical waves passing through a medium. Sound waves are longitudinal waves hence, the oscillation of particles is in the same direction of of the wave propagation.
The energy of a wave is directly proportional to the frequency of the wave and inversely proportional to the wavelength. As the density of the medium increases, the speed of the wave decreases and thereby energy too.
Sound waves travels with higher speed through solids. As their energy increases, the waves moves with higher speed. Hence, the energy of sound waves depends on the nature of the medium.
Find more on sound waves:
https://brainly.com/question/11797560
#SPJ7
A circus performer walked up and to the right for a total displacement of 10\,\text m10m10, start text, m, end text along a diagonal tightrope angled 30 \degree30°30, degree above the ground.
What was the vertical displacement of the circus performer in \text mmstart text, m, end text?
Answer:
5m
Explanation:
khan academy
Vertical displacement of the circus performer is 5 m.
What is Displacement?Displacement is defined as the change in position of an object. It is a vector quantity and has a direction and magnitude.
A circus performer walked up and to the right for a total displacement of 10 m, start to end along a diagonal tightrope angled 30° degree above the ground.
Vertical displacement = 10 sin 30° = 5 m
Vertical displacement of the circus performer is 5 m.
To learn more about displacement refer to the link:
brainly.com/question/11934397
#SPJ2
A 0.290 kg block on a vertical spring with a spring constant of 5.00 ✕ 103 N/m is pushed downward, compressing the spring 0.110 m. When released, the block leaves the spring and travels upward vertically. How high does it rise above the point of release?
___m
Answer:
The height at point of release is 10.20 m
Explanation:
Given:
Spring constant : K= 5 x 10 to the 3rd power n/m
compression x = 0.10 m
Mass of block m= 0.250 kg
Here spring potential energy converted into potential energy,
mgh = 1/2 kx to the 2 power
For finding at what height it rise,
0.250 x 9.8 x h = 1/2 x 5 x 10 to the 3 power x (0.10)to the 2 power) - ( g= 9.8 m/8 to the 2 power
h= 10.20
Therefore, the height at point of release is 10.20 m
A guitar player can change the frequency of a string by "bending" it-pushing it along a fret that is perpendicular to its length. This stretches the string, increasing its tension and its frequency. The B string on a guitar is 64 cm long and has a tension of 74 N. The guitarist pushes this string down against a fret located at the center of the string, which gives it a frequency of 494 Hz. He then bends the string, pushing with a force of 4.0 N so that it moves 8.0 mm along the fret.
* What is the new frequency?
Answer:
[tex]f'=504hz[/tex]
Explanation:
From the question we are told that
The B string on a guitar is 64 cm long
The B string tension tension of 74 N.
Frequency of 494 Hz
Pushed with a Force of 4.0 N
It moves 8.0 mm along the fret.
Generally the equation for frequency of ring under tension is mathematically given as
[tex]2Lf=\sqrt{x\frac{T}{\mu} }[/tex]
[tex]2*(64/100)*494=\sqrt{\frac{74}{m/0.64}[/tex]
[tex](632.32)^2={\frac{74}{m/0.64}[/tex]
[tex](632.32)^2=74*{\frac{0.64}{m}[/tex]
[tex](632.32)^2={\frac{47.36}{m}[/tex]
[tex]m=1.18450761*10^-^4[/tex]
Therefore finding the New frequency f'
[tex]f'=\frac{(\sqrt{\frac{74+11}{(\frac{1.18450761*10^-^4}{0.642})}})}{2*0.642}[/tex]
[tex]f'=\frac{(\sqrt{(\frac{74+11}{1})*(\frac{0.642}{1.18450761*10^-^4}})}{2*0.642}[/tex]
[tex]f'=\frac{(\sqrt{(\frac{85}{1})*(\frac{0.642}{1.18450761*10^-^4}})}{2*0.642}[/tex]
[tex]f'=\frac{(\sqrt{(\frac{54.57}{1.18450761*10^-^4}})}{2*0.642}[/tex]
[tex]f'=\frac{678.7471973}{2*0.642}[/tex]
[tex]f'=572.9111096hz[/tex]
Describe how electric potential energy, kinetic energy, and work change when two charges of opposite sign are placed near each other.
Answer:
As opposites attract, q is pulled to Q. And that force from Q is working on q, force over distance. Which means the potential energy q started with is being converted into kinetic energy. q is accelerating and picking up speed.
Explanation:
1. To get to school, a girl walks 1 km North in 15 minutes. She
then walks 200 m South-west in 160 seconds.
What is the girl's average velocity for her walk to school?
The girl's average velocity is 1.13 m/s
The formula used to determine average velocity is:
Velocity = distance/ timeV = D/tThis means to determine the girl's average velocity is necessary to find out the total distance and the total time.
Distance:
1 km north and 200 m SouthwestAs you can see there are two different distances and they are in different units (meters vs kilometers), let's convert the kilometers to meters so both distances are in the same unit.
1 x 1000 = 1000 (1 km = 1000 meters)Add the two distances:
1000 meters + 200 meters = 1200 meters
Time
15 minutes and 160 seconds
Let's convert the minutes into seconds:
15 x 60 = 900
Add the time:
900 + 160 = 1060
Finally, calculate the average velocity:
1200 meters / 1060 seconds = 1.13 meters per secondLearn more about velocity in: https://brainly.com/question/862972
how does a switch work in a circuit
An electric switch is a device that interrupts the electron flow in a circuit. Switches are primarily binary devices: either fully on or off and light switches have a simple design. When the switch is turned off, the circuit breaks and the power flow is interrupted. Circuits consist of a source of power and load.
If a car travels 60 mph for a distance of 180 miles, how much time
did it take?
Answer:
3 hours
Explanation:
180 divided by 60 (mph means miles per hours by the way)
Why are stars considered to be the building blocks of the universe?
A. Stars are found throughout the galaxy
B. Stars become novas, supernovas, and Black Holes
C. Nuclear fusion within stars creates needed elements for he universe
D. The sun is a star
A LOT OF POINTS!! Best answer gets brainliest!
1) Which two of the following factors affect the momentum of an object: speed, velocity, mass, shape?
2) Can a small object can have a large momentum? Give an example.
3) How could you change the momentum of an object? What would you need to change?
4) A 5000kg truck and a 50 kg person have the same momentum. How is this possible?
Neon has 3 naturally occurring isotopes, Neon-20, Neon-21, and Neon-22. Neon's average atomic mass on the periodic table is 20.179 amu. Based on this information which isotope is most abundant? Explain why abundance of an isotope matters when calculating the average atomic mass of an isotope.
A brick of gold is 0.1 m wide, 0.1 m high, and 0.2 m long. The density of gold is 19,300 kg/m3. What pressure does the brick exert on the table if the brick is resting on its side?
Answer:
The pressure exerted by the brick on the table is 18,933.3 N/m².
Explanation:
Given;
height of the brick, h = 0.1 m
density of the brick, ρ = 19,300 kg/m³
acceleration due to gravity, g = 9.81 m/s²
The pressure exerted by the brick on the table is calculated as;
P = ρgh
P = (19,300)(9.81)(0.1)
P = 18,933.3 N/m²
Therefore, the pressure exerted by the brick on the table is 18,933.3 N/m².
(6.MS-ETS2-1(MA).) The electrons in __________ move about more freely than the electrons in insulators which is why this type of material can be used to create electric circuits.
A) conductors
B) insulators
C) magnets
Answer:
A) conductors
Explanation:
A conductor can be defined as any material or object that allows the free flow of current or electrons (charge) in one or more directions in an electrical circuit. Some examples of a conductor are metals, tungsten, copper, aluminum, iron, graphite, etc.
Basically, the main purpose of a conductor in physics is to provide a low-resistance path between electrical circuits or components. This low-resistance path is to ensure that the electrical components allows the free flow of electrons and thus, enabling charge transfer.
Hence, the electrons in conductors move about more freely than the electrons in insulators which is why this type of material can be used to create electric circuits because it would significantly provide a low-resistance path between the electric circuits.
The density of a solid or liquid material divided by the density of water is called
Answer:
I believe the answer is specific gravity
Explanation:Hope this helps :)
In class, Kelsey stops paying attention to the lesson and begins to focus on tapping her pencil on her desk. Her teacher slowly walks to Kelsey’s desk and gently takes her pencil from her. How would behaviorist B.F. Skinner MOST likely describe this response?
Answer:
I think it might be negative reinforcement.
Explanation:
Answer:
negative reinforcement
Explanation:
A system consists of two particles. Particle 1 with mass 2.0 k g 2.0kg is located at ( 2.0 m , 6.0 m ) (2.0m,6.0m) and has a velocity of ( 3.1 m / s , 2.6 m / s ) (3.1m/s,2.6m/s). Particle 2 with mass 4.5 k g 4.5kg is located at ( 4.0 m , 1.0 m ) (4.0m,1.0m) and has a velocity of ( 1.1 m / s , 0.6 m / s ) (1.1m/s,0.6m/s). Determine the position and the velocity of the center of mass of the system.
Answer:
[tex]Position:(3.38m ,2.53m)[/tex]
[tex]Velocity=(1.72m/s,1.22m/s)[/tex]
Explanation:
From the question we are told that
Mass of particle 1
[tex]M_1=2.0kg[/tex]
Co-ordinate of particle 1 (2.0m,6.0m)
Velocity of Particle 1
[tex]V_1= (3.1 m / s , 2.6 m / s )[/tex]
Mass of particle 2
[tex]M_2=4.5kg[/tex]
Co-ordinate of particle 2 (4.0m,1.0m)
Velocity of Particle 1
[tex]V_2=( 1.1 m / s , 0.6 m / s )[/tex]
Generally the Position is mathematically given as
[tex]X =\frac{ ((M_1 * Cx_1) + (M_2 *Cx_2)}{(M_1 + M_2)}[/tex]
[tex]X=\frac{2*2+4.5*4}{2+4.5}[/tex]
[tex]X=3.38[/tex]
[tex]Y=\frac{(M_1* Cy_1 + M_2* Cy_2)}{(M_1 + M_2)}[/tex]
[tex]Y =\frac{(2 * 6 + 4.5 * 1)}{(2 + 4.5)}[/tex]
[tex]Y= 2.53 m[/tex]
Therefore the position is given as
[tex]Position:(3.38m ,2.53m)[/tex]
Solving for Velocity
Generally the velocity of the system is mathematically Given as
[tex]V_x =\frac{ (M_1 * vx_1 + M_2 * Vx_2)}{(M_1 + M_2)}[/tex]
[tex]V_x=\frac{ (2 * 3.1 + 4.5 *1.1)}{(2 + 4.5)}[/tex]
[tex]V_x=1.72m/s[/tex]
For Y
[tex]V_y =\frac{(M_1* vy_1 + M_2* Vy_2)}{(M_1 + M_2)}[/tex]
[tex]V_y=\frac{ (2 * 2.6) + (4.5*0.6)}{(2 + 4.5)}[/tex]
[tex]V_y=1.22m/s[/tex]
Therefore Velocity
[tex]V=(1.72m/s,1.22m/s)[/tex]
Order the layers, with the oldest at the bottom and most recent at the top.
someone plz help will give brainliest if correct
Answer:
adbce i think
Explanation:
Which of the following remains constant during the motion of a projectile fired from a planet?
A. Momentum
B. Kinetic energy
C. Horizontal component of velocity
D. Vertical component of velocity
Answer:
C. Horizontal component of velocity
Explanation:
Object in motion stays in motion,
nothing works against its motion in the horizontal direction, unlike in the vertical direction, gravity pulls object down.