Explain with reason that when sunlight is focused on a piece of paper with the help of a convex len the paper will burn.​

Answers

Answer 1

Answer:

Convex lenses concentrates the light energy to one spot on the paper so that the heat energy accumulates on that one small spot of paper. ... As the heat increases, combustion will occur when the spot becomes too hot and the paper will burn.

Explanation:

Hope it helps!

If you dont mind can you please mark me as brainlest?


Related Questions

Un tren de alta velocidad (TAV) o tren bala es aquel que alcanza velocidades iguales o superiores a 200 km/h. La energía que tiene el tren en su recorrido habitual es: *

Answers

Answer:

B. Cinética, debido a que esta energía está asociada con la velocidad que posee el tren.

Explanation:

Un tren de alta velocidad (TAV) o tren bala es aquel que alcanza velocidades iguales o superiores a 200 km/h. La energía que tiene el tren en su recorrido habitual es

A. Cinética, debido a que existen trenes elevados los cuales poseen altura y la altura está asociada con la energía cinética.

B. Cinética, debido a que esta energía está asociada con la velocidad que posee el tren.

C. Rápida, porque la energía cinética es sinónimo de rápido.

D. Potencial, debido a la potencia que tiene el tren para moverse.

Solution:

La energía cinética es la energía contenida en un objeto en movimiento. La energía cinética se puede definir como la cantidad de energía necesaria para que un objeto se acelere desde el reposo hasta su velocidad final.

La energía cinética (KE) viene dada por:

KE = (1/2) * masa * velocidad²

Podemos ver que la energía cinética depende de la masa del objeto y la velocidad del objeto.

El tren de alta velocidad posee energía cinética debido a la velocidad del tren.

In a series circuit, there is a 2-ohm resistor with a current of 5A. If there is another resistor with a resistance of 5 ohms, what is the current inside that resistor?

Answers

Answer:

if 2ohms gives 5A

then 5ohms will give 12.5A

since its directly proportional

V=IR

Neptune and Uranus are called the "ice giants" due to the presence of ice on their surface. Which is a reasonable explanation for why there aren't any ice giants in the group of terrestrial planets? A. They have rocky surfaces. B. They do not have rings. C. They are too close to the sun.

Answers

Answer:

C. They are too close to the sun.

Explanation:

Due to their relative location the gas giant such as neptune and Uranus are mostly cold and icy planets as they are located deep into the solar system and have large distance firm the sun.As compared to those of the earth and other rocky planets. Due to their distance they consist of primitive atmosphere and have slow rotation and movement.

A 12 N [E] force is applied to a toy train with a mass of 2.7 kg. The toy train is attached by a light string to a wagon with a mass of 1.8 kg which is attached to a second wagon with a mass of 1.0 kg. If the train is pulled on a surface with a coefficient of kinetic friction of 0.05, determine the tension in the string between the first and the second wagon. (6T, 3C) Include free body diagrams for the three masses involved in the acceleration. (3 Comm.)

Answers

See the attached diagram for reference and free body diagrams. The acceleration a of each body will be the same since each connecting string is in tension.

By Newton's second law, we have

• net force on the train:

- - horizontal

[tex]\sum F = F - F_{k,T} - T_1 = m_Ta[/tex]

(where F = 12 N)

- - vertical

[tex]\sum F = N_T - m_Tg = 0[/tex]

• net force on wagon 1:

- - horizontal

[tex]\sum F = T_1 - T_2 - F_{k,1} = m_1a[/tex]

- - vertical

[tex]\sum F = N_1 - m_1g = 0[/tex]

• net force on wagon 2:

- - horizontal

[tex]\sum F = T_2 - F_{k,2} = m_2a[/tex]

- - vertical

[tex]\sum F = N_2 - m_2g = 0[/tex]

We want to determine T₂, the tension in the string connecting the two wagons.

For each body, the corresponding normal force has magnitude

N = mg

where m is the respective mass, and the kinetic friction has magnitude

Friction = 0.05 N = 0.05mg

So if µ = 0.05, then the frictional force on each body is

[tex]F_{k,T} = 0.05 (2.7\,\mathrm{ kg}) g = 1.323\,\mathrm N[/tex]

[tex]F_{k,1} = 0.05 (1.8\,\mathrm{ kg}) g = 0.882\,\mathrm N[/tex]

[tex]F_{k,2} = 0.05 (1.0\,\mathrm{ kg}) g = 0.49\,\mathrm N[/tex]

which leaves us with the system of equations,

[1] … 12 N - 1.323 N - T₁ = (2.7 kg) a

[2] … T₁ - T₂ - 0.882 N = (1.8 kg) a

[3] … T₂ - 0.49 N = (1.0 kg) a

Adding [1] and [2] eliminates T₁ :

(12 N - 1.323 N - T₁) + (T₁ - T₂ - 0.882 N) = (2.7 kg) a + (1.8 kg) a

[4] … 9.795 N - T₂ = (4.5 kg) a

Divide through both sides of [3] by 1.0 kg to solve for a :

a = (T₂ - 0.49 N) / (1.0 kg)

Substitute this into [4] and solve for T₂ :

9.795 N - T₂ = (4.5 kg) (T₂ - 0.49 N) / (1.0 kg)

(9.795 N - T₂) (1.0 kg) = (4.5 kg) (T₂ - 0.49 N)

9.795 N - T₂ = 4.5 T₂ - 2.205 N

12 N = 5.5 T

T₂ = (12 N) / 5.5 ≈ 2.1818 N ≈ 2.2 N

will mark as brainliest . pls help

Answers

Answer:

answer D

Explanation:

circuit breaker is useful when you do something with your domestic electric circuit..

Electrical current is defined as _____.

the strength of the electric field
the movement of charge past a certain point per unit time
the potential of the battery
the conservation of charge

Answers

Answer:

the strength of the electric field

does a wall or door have more inertia?

Answers

Answer:

door

Explanation:

What is a key difference between transverse and longitudinal waves?

A.) Transverse move up and down while longitudinal can do in any direction.

B.) Transverse can e described as troughs and crest while, longitudinal waves can be described as compression and rarefactions.

C.) There is no difference, it depends on the scientific uses and calculations involved.

D.) Transverse waves can only represent sound while longitudinal are represented by ocean waves, light and other waves​

Answers

B, is the answer to the question

Answer:

B.) Transverse can e described as troughs and crest while, longitudinal waves can be described as compression and rarefactions.

Wo do u think the best male tennis player currently still playing?

1. Rafael nadal
2.Roger federer
3.Novak Djokovic

Answers

Answer:

--..-...-...-.---..-...-...

Answer: right now its djokovic

Explanation:

I am a federer and nadal fan but djokovic is dominating. federer has retired and nadal isnt at his best due to injuries and his age.

A disturbance that generates a wave may be a simple pulse or shock

True or false

Answers

Answer:

That would be true.

-- a bell starts ringing (wave) when you tap it (simple pulse)

-- a pond starts rippling (wave) when a stone drops in (simple shock)

-- a guitar strings starts waving when you pluck it

How much power is needed to lift a 20-kg object to a height of 4.0 m in 2.5 seconds?

Answers

Answer:

313.92w

Explanation:

Formula for power:

P=W/∆t = Fv

Givens:

m=20kg

∆y=4.0m

∆t=2.5s

a=9.81m/s²

In order to find power, we first need to solve for work.

W=Fd (force*displacement), f=mg

W=mg∆y

W=(20kg)(9.81m/s²)(4.0m)

W=784.8J

P=W/∆t

P=784.8J/2.5s

P=313.92 watts

Sunlight is a form of electromagnetic energy.


Please select the best answer from the choices provided

T
F

Answers

Answer: True

Explanation: Hope this helps :)

What is the mass of a body?​

Answers

Explanation:

The mass of a body is its inertia or resistance to change of motion. Mass can therefore be measured either by the amount of force necessary to impart to the body a given motion in a given time or by the acceleration produced by a given force. ...

Plzzz help!! A stationary speed gun emits a
microwave beam at 2.10x1010 Hz. It
reflects off a car and returns 1030 Hz
higher. What is the speed of the car?
(Unit = m/s)

Answers

Answer:

The speed of the car is 14.7m/second or 15 m/second approximately.

Explanation:

A microwave beam at [tex]2.10\times10^1^0Hz[/tex] is generated by a stationary speed gun. It bounces off a car and returns at a higher frequency of 1030 Hz. The car's observed frequency would be the product of adding the two frequencies. That is to say,

       F =[tex]2.1\times10^1^0+1030[/tex] =[tex]2.100000103\times10^1^0Hz[/tex]

Using doppler effect formula

[tex]F=\frac{C}{C-V}\times f[/tex]

Where

F = observed frequency

f = source frequency

C = speed of light = [tex]3\times10^8[/tex]

V = speed of the car

 Putting the values in the formula -

        [tex]2.100000103\times10^1^0=\frac{3\times10^8}{3\times10^8-V}\times2.1\times 10^1^0[/tex]

                 [tex]\frac{2.100000103\times10^1^0}{2.1\times10^1^0}[/tex] [tex]=\frac{3\times10^8}{3\times10^8-V}[/tex]

          [tex]1.000000049=\frac{3\times10^8}{3\times10^8-V}[/tex]

by cross multiplication ,

   300000014.7 - 1.000000049V = [tex]3\times10^8[/tex]

    Collect the like terms  

1.000000049V = 14.71429

      Make V the subject of formula

V = [tex]\frac{14.71429}{1.000000049}[/tex]

V = 14.7 m/s

Therefore , the speed of the car is 15m/second approximately.

             


What is the atomic number the atom shown?
A. 3
B. 13
C. 14
D. 27

Answers

Answer:

13

Explanation:

Brainlest pls

Answer:

B-13

Explanation:

The protons listed in the atom are 13, and the protons are the same number as the atomic number.

Define atmospheric pressure

Answers

Answer:

tmospheric pressure, force per unit area exerted by an atmospheric column (the entire body of air above the specified area)

If the velocity of a car is 45km/h west, how far can it travel in 0.5 hours

Answers

Answer:

22.5km

Explanation:

Since 0.5 of an hour is half of an hour, you have to divide 45 by half, and you would get 22.5 km

A ball is launched horizontally at a speed of 4.0m/s from the top of a cliff that is 24.6 meters high. Where in the ball's trajectory is the horizontal speed a maximum? Explain how you know.

Answers

Answer:

The horizontal speed of the ball is constant where there is little resistance from the air

Explanation:

From the given parameters of the ball, we have;

The horizontal speed of the ball = 4.0 m/s

The height of the cliff from which the ball is launched = 24.6 meters

The direction in which the ball is launched = Horizontally

The components of the forces acting on the ball are;

The vertical force = The Earth's gravitational attraction

The horizontal force = 0 N (There are no horizontal forces acting on the ball)

According to Newton's first law of motion, the ball will continue in its uniform motion or in its rest state unless acted upon by a force

Therefore, given that there are no horizontal forces component acting on the ball, (little air resistance) the ball will continue with the initial horizontal velocity, such that the horizontal velocity of the ball remains constant.

An organism with the alleles Aa is called __________, while one with AA or aa is called __________.

A. heterozygous, hom/ zygous
B. heterozygous, homo/zygous

Answers

Answer:

Hetefrozygous, homofzygous

What are some of the skills required to play floor hockey?​

Answers

Answer:

Skills required to play floor hockey include passing, receiving passes, shooting, stick- handling (dribbling), defensive skills and goaltending. Players are allowed to use both sides of the blade of the stick. The front side is called the forehand (face) and the back side is called the backhand.

Passing, receiving passes, shooting, goal tending, stick handling and defensive skills

To fight a bacterial infection, a patient was given an antibiotic to take for 10 days. After the patient finished taking the antibiotics as directed, almost all the bacteria were killed. After another 10 days, the patient was sick again with the same type of infection.
What most likely happened?

A A few bacteria survived the antibiotics and stopped reproducing.

B The patient’s high fever inactivated the antibiotic, allowing the surviving bacteria to grow rapidly.

C The antibiotic slowed the life cycle of the bacteria.

D Some of the bacteria were resistant to the antibiotic, and they
reproduced.

HELP!!

Answers

Answer:

its D

Explanation:

didnt see what u said lol they deleted it again :(

Putting the moon back to its original size, if it were suddenly to move to twice the
distance from the earth, how would that effect the force of gravitation with the
earth?

Answers

Link is a virus don’t click it trust me okay?

Where is the most and the least KENETIC ENERGY

Answers

Answer:

Where is kinetic energy the least?, and most?

Explanation:

Least : When the Moon is farthest from Earth in its nearly elliptical orbit, its speed is least. Its kinetic energy has become least, and its potential energy is greatest.

Further : Kinetic energy, form of energy that an object or a particle has by reason of its motion. If work, which transfers energy, is done on an object by applying a net force, the object speeds up and thereby gains kinetic energy.

May be different for you, but i really hope I helped out.

Una bola se lanza verticlamente de la parte superior de un edificio con una velocidad inicial 25 m/s la bola impacta al suelo en la base del edificio 7 segundos despues de ser lanzada ¿que altura subio la bola

Answers

Answer:

S = 415.1 meters

Explanation:

Dados los siguientes datos;

Velocidad inicial = 25 m/s

Tiempo, t = 7 segundos

Para encontrar la altura (desplazamiento) de la pelota, usaríamos la segunda ecuación de movimiento;

[tex] S = ut + \frac {1}{2}at^{2}[/tex]

Dónde;

S representa el desplazamiento o altura medida en metros.

u representa la velocidad inicial medida en metros por segundo.

t representa el tiempo medido en segundos.

a representa la aceleración medida en metros por segundo cuadrado.

Sustituyendo en la ecuación, tenemos;

[tex] S = 25*7 + \frac {1}{2}*(9.8)*7^{2}[/tex]

[tex] S = 175 + 4.9*49 [/tex]

[tex] S = 175 + 240.1 [/tex]

S = 415.1 meters

who invented Pascal??​

Answers

What the guy above me said

Define heat according to molecular theory .​

Answers

I think ....... the answer will be ......

like a theory

(b) Figure 4 shows a car travelling on a motorway.
A passenger wants to check the accuracy of the speedometer of the car.
The car is travelling at a constant speed.
The passenger has a stopwatch.
The lamp posts are 40 m apart.
lamp post
Figure 4
Describe how the passenger could determine the speed of the car as accurately
as possible.
(3)

Answers

Answer:

To calculate anything - speed, acceleration, all that - we need data. The more data we have, and the more accurate that data is, the more accurate our calculations will be. To collect that data, we need to measure it somehow. To measure anything, we need tools and a method. Speed is a measure of distance over time, so we'll need tools for measuring time and distance, and a method for measuring each.

Conveniently, the lamp posts in this problem are equally spaced, and we can treat that spacing as our measuring stick. To measure speed, we'll need to bring time in somehow too, and that's where the stopwatch comes in. A good method might go like this:

Press start on the stopwatch right as you pass a lamp postEach time you pass another lamp post, press the lap button on the stopwatchPress stop after however many lamp posts you'd like, making sure to hit stop right as you pass the last lamp postRecord your dataCalculate the time intervals for passing each lamp post using the lap dataCalculate the average of all those invervals and divide by 40 m - this will give you an approximate average speed

Of course, you'll never find an *exact* amount, but the more data points you have, the better your approximation will become.

Why is the global temperature increasing? Explain the science behind it.

Answers

Because global warming.

Global warming is the long-term heating of Earth's climate system observed since the pre-industrial period (between 1850 and 1900) due to human activities, primarily fossil fuel burning, which increases heat-trapping greenhouse gas levels in Earth's atmosphere.

Three vector are oriented as shown in figure below where. A=20.0units, B=40.0units, And C=30.0. (a) The x and Y component of the resultant vector. (b) The magnitude of the resultant vector. (c) Direction of the resultant vector ​ { please help me}

Answers

Answer:

Explanation:

a). Vertical component of vector B = Bsin(45)

                                                     = 40sin(45°)

                                                     = 28.28 units

Horizontal component of vector B = Bcos(45°)

                                                         = 40cos(45°)

                                                         = 28.28 units

Vertical component of vector C = Csin(45°)

                                                     = 30sin(45°)

                                                     = 21.21 units

Horizontal component of vector C = Ccos(45°)

                                                         = 30cos(45°)

                                                         = 21.21 units

Vertical forces = A + Bsin(45°) - Csin(45°)

                       = 20 + 28.28 - 21.21

                       = 27.07

Horizontal forces = Bcos(45°) + Ccos(45°)

                             = 28.28 + 21.21

                             = 49.49 units

b). Magnitude of resultant force = [tex]\sqrt{(27.07)^2+(49.49)^2}[/tex]

                                                = [tex]\sqrt{3182.045}[/tex]

                                                = 56.41 units

c). Direction of the resultant force → Along vector B (at an angle of 45° from the horizontal line)

13.If a jet plane with a velocity of 20 m/s at t = 0 accelerates at a rate of 40 m/s²
for 3 seconds, what is its veloaty at time = 3 seconds?​

Answers

Answer:

140m/s

Explanation:

V=V0+at. V=20+40*3=140m/s

Other Questions
Help! Need it ASAP!Is steam and vapour different? If they are then how are they different? I just need the answer the work isn't necessary during the golden age it was a great period for... Hemophilia is a sex-linked recessive trait. If a man with hemophilia marries a woman who is a carrier for the trait, what are the predictedphenotypes for their children? A1 carrier male: 1 affected male: 1 carrier female: 1 affected femaleB 1 carrier male: 1 affected male: 1 carrier female: 1 normal femaleC1 normal male: 1 affected male: 1 carrier female: 1 normal femaleOD 1 normal male: 1 affected male: 1 carrier female: 1 affected female Will give brainliest answer please help what are common prime factor of 77 and 242? Financial analysis Group of answer choices uses historical financial statements and is thus useful only to assess past performance uses historical financial statements and is thus useful only to assess past performance uses historical financial statements to measure a company's performance and in making financial projections of future performance. is accounting record-keeping using generally accepted accounting principles Find a solution to the following system of equations by graphingy= 7x + 3y= 3x -0.5 What is the meaning of vida Jamie is not sure exactly what career to pursue but when she learned about the Human Services cluster, something spoke to her. Which types of career pathways are available to Jamie? Pick a career from each path and explain what it involves and where she might work if she had that job. Would you expect human DNA to be more closely related to tiger or jellyfish? Explain. 50 POINTS! QUICKLY Are the pairs of variables x and y the solutions to the equation x^22y=7? 1. (5,8)2. (-1,-3)3. (-4,-11.5)4. (1.2, -2.78)These are all yes and no questions! PLS HELP ASAP!!conteste la siguiente pregunta. cuando empiezas tu nuevo trabajo? Which of the following abbreviations requires the use of one or more periods? A. Mr B. NASCAR C. NASA Please helpDesifer the phraseA r s O l R 2 O f T r Y e0 0 0O v e You should be able to see the rest VerbosComplete the chart with the correct verb forms.Infinitivocontar(3)t(1)juegas(5)empiezashosotrascontamos(4)mostramos(8)ellos(2)juegan(6)empiezanDatamostrarM(1) Which of the following is TRUE of an analytical paper?A.It explores a debatable or controversial topic.B.It asks a question and takes no stance.C.It is highly persuasive.D.It states a writers stance on a topic. Write the sentence as an inequality. 1. The sum of twice a number n and 8 is at most 25. PLEASE HELP!!! The diagram shows two parallel lines inter-sected by a transversal. Tell whether each sen-tences is True or False. Please select the word from the list that best fits the definitionUse an outline to answer your questions Is it survey, question, read or write?