Answer:
When the concentration is higher, more hydrogen ions are near the Zn atoms at any given time. This allows for more Zn atoms to be ionized and dissolved into the solution per second.
Explanation:
a physical change is change
that
a, forms a substance with new composition
b, results in the formation of new properties
c, results in the formation of new substance
d, does not alther the composition of the substance
Answer:
The answer is D
Explanation:
All the other options are associated with chemical change
Answer:
D
Explanation:
when we say phisical change it is change of phisical so it does not change the composition because when we say it alther the composition it will be chemical change.
Find the molecular formula for CH that has a molecular weight of 65g.
Answer: Molecular Formula is C5H5
Explanation: M(CH) = 13.018 g/mol
Empirical formula of compound is (CH)x in which x = 2,3,4,...
Molar mass of the substance is 65 g. x = 65 g/mol : 13 g/mol = 5
In the reaction N2 + 3H2—> 2 NH3, what is the mole ratio of N2 to
NH3?
Select one:
O a. 1:1
O b. 2:3
O c. 1:3
O d. 1:2
Answer:
hey,the answer is d, 1:2
Answer: D
Explanation:
The equation shows that one mole of nitrogen reacted with three moles of hydrogen to produce two moles of ammonia.
What are the environmental factors in space that need to be taken into account in the design of electronics?
Answer: Here
Explanation:
trapped and transient radiation, solar and galactic cosmic rays, which can profoundly damage spacecraft electronics are presented
Answer:
Environmental factors including trapped and transient radiation, solar and galactic cosmic rays, which can profoundly damage spacecraft electronics are presented. Some effects such as ionization and atomic displacement damages to semiconductors and single event phenomena are also briefly mentioned.
Explanation:
If you start with 6 moles of N2 and 6 moles of H2 (meaning you won't have enough of 1 of the ingredients), how many moles of NH3 would you be able to make?
Answer:
[tex]4molNH_3[/tex]
Explanation:
Hello there!
In this case, according to the given information it will be firstly necessary to set up the chemical equation taking place:
[tex]N_2+3H_3\rightarrow 2NH_3[/tex]
We infer we need to calculate the moles of NH3 by using both of the moles of N2 and H2 at the beginning, in order to identify the limiting reactant:
[tex]n_{NH_3}=6molN_2*\frac{2molNH_3}{1molN_2}=12molNH_3\\\\ n_{NH_3}=6molH_2*\frac{2molNH_3}{3molH_2}=4molNH_3\\[/tex]
Thus, since hydrogen yields the fewest moles of ammonia, we conclude that we are just able to yield 4 moles of NH3.
Regards!
Calculate the molarity of an HCl solution if 25.0 mL of the solution is neutralized by 15.5 mL of 0.800 M NaOH. Below is the unbalanced equation: ______ HCl + _____ NaOH →____ H2O + _____ NaCl
Answer:
.496 M .
Explanation:
15.5 mL of .8 M NaOH will contain .0155 x .8 moles of NaOH
moles of NaOH = .0124 moles
For neutralization, moles contained by 25 mL of HCl = .0124
Hence molarity of HCl = .0124 / .025
= .496 M .
0.496 M is the molarity of an HCl solution if 25.0 mL of the solution is neutralized by 15.5 mL of 0.800 M NaOH.
What is molarity?Molarity (M) is the amount of a substance in a certain volume of solution. Molarity is defined as the moles of a solute per litres of a solution. Molarity is also known as the molar concentration of a solution.
Molarity = [tex]\frac{Moles \;solute}{Volume of solution in litre}[/tex]
15.5 mL of 0.8 M NaOH will contain 0.0155 x 0.8 moles of NaOH
Moles of NaOH = 0.0124 moles
For neutralization, moles contained by 25 mL of HCl = 0.0124
Hence molarity of HCl = [tex]\frac{0.0124}{0.025}[/tex]
= 0.496 M .
Hence, 0.496 M is the molarity of an HCl solution if 25.0 mL of the solution is neutralized by 15.5 mL of 0.800 M NaOH.
Learn more about the molarity here:
https://brainly.com/question/2817451
#SPJ5
If an object is not accelerating, you can be sure that
A. its speed is 0 m/s.
B. it has a mass of 0 kg.
c. the net force acting on it is O N.
Answer:
A
Explanation:
It's not moving so it would be going 0 meters per second
Answer:
I think its A
Explanation:
If we view a new moon tonight, how many weeks will pass before we view a full moon?
If we view a new moon tonight, 4 weeks will pass before we view a full moon. The sole natural satellite of Earth is the Moon.
What is moon?The sole natural satellite of Earth is the Moon. With a diameter that is around one-fourth that of the Earth, it's the fifth biggest satellite inside the solar system as well as the largest and also most massive when compared to its parent planet. The Moon is larger than any other dwarf planets of a Solar System and belongs to a planetary-mass body with a distinct rocky body, rendering this a satellite planet according to geophysical interpretations of the term.
There isn't much of an atmosphere, hydrosphere, and magnetic field there. With a surface gravity of 0.1654 g, it has a gravity that is around one-sixth that of Earth. Jupiter's moon Io is the only satellite inside the Solar System that is documented to have a higher gravity and density. If we view a new moon tonight, 4 weeks will pass before we view a full moon.
Therefore, if we view a new moon tonight, 4 weeks will pass before we view a full moon.
To know more about moon, here:
https://brainly.com/question/29775627
#SPJ3
Given the balanced equation representing a reaction:
H2SO3 + H2O « H3O+ + HSO3-
According to one acid-base theory, the H2SO3 molecules act as (AKS 5g)
Answer:
An acid because they donate H^+ ions
Explanation:
Let us look at the equation again;
H2SO3 + H2O « H3O+ + HSO3-
An acid donates hydrogen ion while a base accepts hydrogen ion. Hence, we have to look at which species that acted as hydrogen ion donors or acceptors.
We can clearly see that H2SO3 acted as a hydrogen ion donor while H2O acted as a hydrogen ion acceptor.
Thus, H2SO3 acted as an acid by donating hydrogen ions.
Characterize EACH of the three given statements as being TRUE or FALSE and then indicate the collective true-false status of the statements using the choices. (1) Electron loss is always associated with an increase in oxidation number. (2) An exothermic reaction occurs when the energy required to break bonds in reactants is less than the energy released by bond formation in the products. (3) The concentrations of pure liquids and pure solids are never included in an equilibrium constant expression because such concentrations never change.
Answer:
Electron loss is always associated with an increase in oxidation number- True
An exothermic reaction occurs when the energy required to break bonds in reactants is less than the energy released by bond formation in the products. True
The concentrations of pure liquids and pure solids are never included in an equilibrium constant expression because such concentrations never change. True
Explanation:
Oxidation implies loss of electrons. When a specie looses electrons, its oxidation number increases. For instance; Fe(s) -----> Fe^2+(aq) + 2e implies an increase in oxidation number of Fe from 0 to +2.
In an exothermic reaction, the energy required to break the bonds in the reactants is less than the energy released when new bonds form in the products.
We do not include the concentrations of pure liquids and pure solids in the equilibrium constant expression because the concentration of these do not change significantly throughout the reaction.
How is the process of natural selection different from the process of selective breeding?
Answer:
Explanation:
The difference between the two is that natural selection happens naturally, but selective breeding only occurs when humans intervene. For this reason selective breeding is sometimes called artificial selection. Different varieties of plants and animals with desired characteristics can be developed by selective breeding.
___Fe2O3 + ___C --> ___Fe + ___ C03 balanced
Answer:
Fe2O3 + C → 2Fe + CO3
Explanation:
The unbalanced equation given in this question is as follows:
Fe2O3 + C → Fe + C03
To balance this equation, one should ensure that the number of atoms of each element on both sides of the equation is equal. The balanced equation is as follows;
Fe2O3 + C → 2Fe + CO3
N.B, there are;
- 2atoms of Fe on both sides
- 1 atom of C on both sides
- 3 moles of O on both sides
What is Permeability
i think i put it in the wrong one..
Answer:
the state or quality of a material or membrane that causes it to allow liquids or gases to pass through it.
HELP PLEASE CHEMISTRY!!!!
Answer:
amını sike bilirim tabi verirsen
PLEASE HELPPP! THANKKK YOUUU!!!!
Answer:
Electrons are discharged by the positive ions on the skin surface.
what are electrons. in your own words
Answer:
Electrons are the smallest of the particles that make up an atom, and they carry a negative charge.
Answer:
Electrons are the smallest subatomic particles that make up an atom. They have a mass of 1/1836 amu's or 0 amu's (no mass) Electrons are located in the electron cloud and have a negative charge.
Explanation:
Hope that helps
A gas is held at 120.4 kPa and 333K. When the temperature is decreased to
275K at a constant volume, calculate the new pressure in the container.
Type your answer with the correct number of sig figs and units. *
Help please 100 points!!
Answer:
....
Explanation:
Influences the loudness of a sound
Which pairs of atoms will form covalent bonds? (Can pick multiple)
Answer: The answer is O and F
which is oxygen and flourine
HOPE THIS HELPS IF THERE IS MORE FEEL FREE TO COMMENT :)
Considere un elemento "X" que posee como valencias 2, 4 y 6. En su nomenclatura tradicional, considerando la valencia cuatro, ese compuesto debería considerar la terminación:
Answer:
"ite"
Explanation:
Se sabe que los elementos del grupo 16 de la tabla prioritaria muestran estados de oxidación o valencias de 2,4 y 6 respectivamente, dependiendo del compuesto formado.
Por ejemplo, el azufre forma los siguientes compuestos;
sulfato de sodio (el azufre tiene una valencia de 6)
Sulfito de sodio (el azufre tiene una valencia de 4)
Sulfuro de sodio (el azufre tiene una valencia de 2)
Por lo tanto, en compuestos en los que exhiben una valencia de 4, la terminación común es "ite"
Answer:
ite
Explanation:
Hope this helps
Need help fast! Would love if you could explain... but if not that’s ok
A molecule contains 52.20 grams of manganese and 3.80 g of carbon what is its empirical formula
MnC3
Mn3C
Answer: Mn3C is the corrects answer
Trust me :)
A student designed an experiment to test the effect on the magnitude of the magnetic field that is generated around the wire loop. The student increased the current that passes through the wire and tests the magnitude of the magnetic force that is generated. The experimental setup is shown here. Which statements accurately describe this experimental design? Select ALL that apply. A) The student's dependent variable is the size of the wire loop. B) The student's independent variable is the size of the wire loop. C) The student's dependent variable is the magnitude of the magnetic field that is generated. D) The student's independent variable is the magnitude of the magnetic field that is generated. E) The student's independent variable is the amount of current that is being passed through the wire.
Answer:
C
Explanation:
1.
How does light behave when it is shined on an object?
Answer:
Reflection is when light bounces off an object. If the surface is smooth and shiny, like glass, water or polished metal, the light will reflect at the same angle as it hit the surface. For a smooth surface, reflected light rays travel in the same direction.
Explanation:
A gas has a volume of 1.22L at 179K. Once heated, the same gas now has a volume of 6.1L at 285K and 1.34atm. What was the original pressure of the gas?
The properties of compounds are (what?) to the elements that make it up. *
Answer:A compound is a unique substance that forms when two or more elements combine chemically. A compound always has the same elements in the same proportions. The properties of compounds may be very different from the properties of the elements that form them. Some compounds form rigid frameworks called crystals.
Explanation:
Answer:
An element or compounds’ physical properties are far easier to detect. These properties are things that can be observed without changing the identity of the element or compound. These properties include color, smell, freezing point, boiling point, melting point, opacity, viscosity, and density.
Explanation:
PLEASE HELPPP!!!! THANK YOUUU!!!!
You have the correct answer
86.30 mL of an HCl solution was required to neutralize 31.75 mL of 0.150 M NaOH. Determine the molarity of the HCI.
Answer:
0.055M
Explanation:
Using the formula as follows:
CaVa = CbVb
Where;
Ca = concentration of acid (M)
Cb = concentration of base (M)
Va = volume of acid (mL)
Vb = volume of base (mL)
According to the information given in this question, Ca (HCl) = ?, Cb (NaOH) = 0.150, Va (HCl) = 86.30mL, Vb (NaOH) = 31.75mL
Using CaVa = CbVb
Ca = CbVb ÷ Va
Ca = (0.150 × 31.75) ÷ 86.30
Ca = 4.7625 ÷ 86.30
Ca = 0.055M
On the basis of your data, what elements could be responsible for each of these colored flames? Be specific.
Answer:
The answer is "Red- Lithium and Green- Copper".
Explanation:
The RedLithium is using in the batterie, which substituted the M12 and M18 lithium-ion packs as were first introduced in 2010. Milwaukee RedLithium power generation, in a nutshell, combines electronic systems, temperature resilience, or control that produce reliable, consistent electricity. This device outlasts all the other skilled battery cells, thinks faster, and works harder.
Its greenish light is a natural hue of a patina that forms over the surface layer; the patina covers its copper and produces a beautiful bluish-green facade shown on many copper rooftops or structures.
6. What category of elements is found between the metals and nonmetals
on the periodic table?
A synthetic
B. metalloids
C. radioactive
D. noble gases
Answer:
B. metalloids
Explanation:
The metalloids are found between metals and non-metals on the periodic table.
Metalloids have properties between those of metals and non-metals. Under certain prevalent conditions, they exhibit a set of properties.
Synthetic substances are those artificially made, they are not found on the periodic table.
Noble gases are found in the last group on the periodic table.
Radioactive substances are found in the lanthanide and actinide series.
The temperature of the areas surrounding Kochi before each storm was about 10°C and there was the same amount of water vapor in the air. Given this information, which storm do you predict will have the most rainfall, and why?
Answer:
Tropical storm
Explanation:
The tropical storm have the most rainfall because tropical winds will increase in strength as temperatures rise. With the increase in temperature, the tropical storms have stronger winds which leads to produce higher rainfall. There is a direct relationship between temperature and amount of rainfall. As the temperature increases, the tropical storms have stronger winds which leads to more rainfall while on the other hand, decrease in temperature decrease the strength of the tropical storm's winds that leads to lower rainfall.
The temperature given shows that the storm that will be predicted is a tropical storm.
What is temperature?It should be noted that temperature means the degree of hotness or coldness in a body.
In this case, since the temperature of the areas surrounding Kochi before each storm was about 10°C and there was the same amount of water vapor in the air, the appropriate storm is a tropical storm.
Learn more about temperature on:
https://brainly.com/question/2339046