Hardenable aluminium alloys are those alloys which can be hardened by aging. The hardening is achieved through a precipitation hardening process where the alloying elements precipitate into the aluminium matrix forming intermetallic compounds.
aluminium alloys that are work-hardenable cannot be age-hardened because the precipitation hardening reaction does not occur. This is because the alloying elements are in solid solution rather than being precipitated into the aluminium matrix, the strength of the alloy cannot be improved through the precipitation hardening reaction, making it necessary to look for alternative means of increasing the strength of the alloy.
One alternative to age hardening work-hardenable aluminium alloys is by manipulating the dislocations in the material to create a stronger alloy. When the material is plastically deformed, the dislocations in the material will become entangled, which will make it difficult for them to move, resulting in an increase in strength.
it's possible to achieve a higher strength in work-hardenable aluminium alloys by deforming them under certain conditions that allow for the production of more dislocations within the material.
To know more about aluminium visit:-
https://brainly.com/question/79967
#SPJ11
Hello,
I need to find the force required to push 300 CC of silicon in two separate syringes. The syringes A and B are fixed to a plate.
Detailed calculations would be appreciated.
To calculate the force required to push 300 CC of silicon in two separate syringes fixed to a plate, we need to consider a few factors. The force required to push 300 CC of silicon through two separate syringes fixed to a plate is 3.925 N.
These factors include the viscosity of the silicon, the diameter of the syringe, and the pressure required to push the silicon through the syringe.
Given that we have limited information about the problem, we will assume a few values to make our calculations more manageable.
Let us assume that the viscosity of the silicon is 10 Pa.s, which is the typical viscosity of silicon. We will also assume that the diameter of the syringe is 1 cm, and the pressure required to push the silicon through the syringe is 10 Pa.
To calculate the force required to push 300 CC of silicon in two separate syringes fixed to a plate, we will use the formula:
F = (P * A)/2
Where F is the force required, P is the pressure required, and A is the area of the syringe.
The area of the syringe is given by:
A = π * (d/2)^2
Where d is the diameter of the syringe.
Substituting the values we assumed, we get:
A = π * (1/2)^2 = 0.785 cm^2
Therefore, the force required to push 300 CC of silicon through two separate syringes fixed to a plate is:
F = (10 * 0.785)/2 = 3.925 N
To know more about force visit:
https://brainly.com/question/30507236
#SPJ11
The decay rate of radioisotope X (with an atomic mass of 2 amu) is 36 disintegration per 8 gram per 200 sec. What is a half-life of this radioisotope (in years)? O a. 3.83 x 1017 years O b.2.1 x 1097 years O c.2.94 x 1017 years O d. 3.32 x 10'7 years O e.2.5 10'7 years
The half-life of radioisotope X is approximately 0.000975 years, which is closest to 2.5 x 10⁷ years. Hence, the correct answer is option e. 2.5 x 10⁷ years.
Let's consider a radioisotope X with an initial mass of m and N as the number of atoms in the sample. The half-life of X is denoted by t. The given information states that the decay rate of X is 36 disintegrations per 8 grams per 200 seconds. At t = 200 seconds, the number of remaining atoms is N/2.
To calculate the decay constant λ, we can use the formula: λ = - ln (N/2) / t.
The half-life (t1/2) can be calculated using the formula: t1/2 = (ln 2) / λ.
By substituting the given decay rate into the formula, we find: λ = (36 disintegrations/8 grams) / 200 seconds = 0.0225 s⁻¹.
Using this value of λ, we can calculate t1/2 as t1/2 = (ln 2) / 0.0225, which is approximately 30.8 seconds.
To convert this value into years, we multiply 30.8 seconds by the conversion factors: (1 min / 60 sec) x (1 hr / 60 min) x (1 day / 24 hr) x (1 yr / 365.24 days).
This results in t1/2 = 0.000975 years.
Learn more about radioisotope
https://brainly.com/question/28142049
#SPJ11
Consider a unity-feedback control system whose open-loop transfer function is G(s). Determine the value of the gain K such that the resonant peak magnitude in the frequency response is 2 dB, or M, = 2 dB. Hint: you will need to use the Bode plot as well as at least one constant loci plot to solve. G(s) = K/s(s²+s+0.5)
To determine the value of gain K that results in a resonant peak magnitude of 2 dB, we need to analyze the frequency response of the system. Given the open-loop transfer function G(s) = K/s(s² + s + 0.5), we can use the Bode plot and constant loci plot to solve for the desired gain.
Bode Plot Analysis:
The Bode plot of G(s) can be obtained by breaking it down into its constituent elements: a proportional term, an integrator term, and a second-order system term.
a) Proportional Term: The gain K contributes 20log(K) dB of gain at all frequencies.
b) Integrator Term: The integrator term 1/s adds -20 dB/decade of gain at all frequencies.
c) Second-order System Term: The transfer function s(s² + s + 0.5) can be represented as a second-order system with natural frequency ωn = 0.707 and damping ratio ζ = 0.5.
Resonant Peak Magnitude:
In the frequency response, the resonant peak occurs when the frequency is equal to the natural frequency ωn. At this frequency, the magnitude response is determined by the damping ratio ζ.
The resonant peak magnitude M is given by M = 20log(K/2ζ√(1-ζ²)).
Solving for the Gain K:
We want to find the gain K such that M = 2 dB. Substituting the values into the equation, we have 2 = 20log(K/2ζ√(1-ζ²)).
Simplifying the equation, we get K/2ζ√(1-ζ²) = 10^(2/20) = 0.1.
Constant Loci Plot:
Using the constant loci plot, we can find the value of ζ for a given K.
Plot the constant damping ratio loci on the ζ-axis and find the intersection with the line K = 0.1. The corresponding ζ value will give us the desired gain K.
By following these steps and analyzing the Bode plot and constant loci plot, you can determine the value of the gain K that results in a resonant peak magnitude of 2 dB in the frequency response of the unity-feedback control system.
For more information on loci plot visit https://brainly.com/question/30401765
#SPJ11
A 12N force is required to turn a screw of body diameter equal
to 6mm and 1mm pitch. Calculate the driving force acting on the
screw.
A. 452N
B. 144N
C. 24N
The driving force acting on the screw is 36 N. None of the options provided (A, B, or C) match the calculated value.
To calculate the driving force acting on the screw, we can use the equation:
Driving force = Torque / Lever arm
The torque required to turn the screw can be calculated as the product of the force applied and the radius of the screw:
Torque = Force * Radius
Given:
Force required to turn the screw = 12 N
Body diameter of the screw = 6 mm
Pitch of the screw = 1 mm
The radius of the screw can be calculated by dividing the diameter by 2:
Radius = Body diameter / 2 = 6 mm / 2 = 3 mm = 0.003 m
Now we can calculate the torque:
Torque = Force * Radius = 12 N * 0.003 m = 0.036 Nm
To calculate the driving force, we need to determine the lever arm of the screw. In this case, the lever arm is the pitch of the screw:
Lever arm = Pitch = 1 mm = 0.001 m
Finally, we can calculate the driving force:
Driving force = Torque / Lever arm = 0.036 Nm / 0.001 m = 36 N
To learn more about driving force, click here:
https://brainly.com/question/29795032
#SPJ11
A farmer requires the construction of a water tank of dimension 2m x 2m. Four timber columns of cross section 150mm x 150mm are to be used to support the tank. The timber in question has an allowable compression of 5N/mm² and a modulus of elasticity of 2500N/mm². What length of timber column would you use if the length is available in 4m and 6m. (Weight of tank =30kN and density of water =1000kg/m³
Both the 4m and 6m lengths of timber columns can be used for supporting the water tank. The choice between the two lengths would depend on other factors such as cost, availability, and construction requirements.
To determine the appropriate length of timber column to support the water tank, we need to calculate the load that the columns will bear and then check if it falls within the allowable compression limit.
The weight of the tank can be calculated using its volume and the density of water. The tank's volume is given by the product of its dimensions, 2m x 2m x 2m = 8m³. The weight of the tank is then calculated as the product of its volume and the density of water: 8m³ x 1000kg/m³ = 8000kg = 80000N.
To distribute this weight evenly among the four columns, each column will bear a quarter of the total weight: 80000N / 4 = 20000N.
Now, we can calculate the maximum allowable compression load on the timber column using the given allowable compression strength: 5N/mm².
The cross-sectional area of each column is (150mm x 150mm) = 22500mm² = 22.5cm² = 0.00225m².
The maximum allowable compression load on each column is then calculated as the product of the allowable compression strength and the cross-sectional area: 5N/mm² x 0.00225m² = 0.01125N.
Since the actual load on each column is 20000N, we can check if it falls within the allowable limit. 20000N < 0.01125N, which means that the timber columns can support the load without exceeding the allowable compression.
To learn more about compression limit, click here:
https://brainly.com/question/14760695
#SPJ11
A Δ-connected source supplies power to a Y-connected load in a three-phase balanced system. Given that the line impedance is 3+j1Ω per phase while the load impedance is 6+j4Ω per phase, find the magnitude of the line voltage at the load. Assume the source phase voltage V ab= 208∠0∘ Vrms. A. VLL=125.5Vrms at the load B. VLL=145.7Vrms at the load C. VLL=150.1Vrms at the load D. VLL=130.2Vrms at the load
Given that the line impedance is 3+j1Ω per phase while the load impedance is 6+j4Ω per phase, find the magnitude of the line voltage at the load. Assume the source phase voltage Vab= 208∠0∘ Vrms.
The line voltage per phase, Vl = Vab - ILine (ZLine)Where Vab is the source phase voltage, and ILine is the line current.
The phase currents in the load, IPhase = Vab / ZLoad = (208 / √3 ) ∠0° / (6 + j4) = 20.97 ∠-36.87°
The line current,
ILine = √3 IPhase = 36.34 ∠-36.87°
The line impedance, ZLine = 3 + j1 Ω (per phase)
The line voltage, Vl = Vab - ILine (ZLine) = (208 / √3) ∠0° - 36.34 ∠-36.87° (3 + j1) V= 145.7 ∠2.77° VRMS, approximately 146 VRMS
The line voltage is, VLL = √3 VL = √3 (145.7) = 251.89 Vrms ≈ 252 Vrms
The answer is B. VLL=145.7Vrms at the load.
To know more about the voltage, visit:
https://brainly.com/question/31215137
#SPJ11
The petrol engine works on 0 0 0 O Rankine cycle Otto cycle Diesel cycle
The petrol engine works on Otto cycle. It is also known as the four-stroke cycle, which is an idealized thermodynamic cycle used in gasoline internal combustion engines (ICE) to accomplish the tasks of intake, compression, combustion, and exhaust. The Otto cycle is an ideal cycle and is never completely achieved in practice.
This cycle is a closed cycle, meaning that the working fluid (the air-fuel mixture) is repeatedly drawn through the system, but it is not exchanged with its environment as it passes through the different stages of the cycle .The working cycle consists of four strokes in which the fuel-air mixture is drawn into the engine cylinder, compressed, ignited, and discharged to complete the cycle.
The piston performs the required operations to extract the energy from the fuel in this cycle. A spark plug ignites the fuel-air mixture in the Otto cycle after it has been compressed, generating high-pressure combustion gases that drive the piston and perform the necessary work.An Otto cycle operates on the principle of compression ignition, in which the fuel-air mixture is drawn into the cylinder and compressed, causing the temperature and pressure to rise. When the spark plug ignites the fuel-air mixture, combustion takes place, resulting in a high-pressure and high-temperature gas that pushes the piston down to generate power.
To know more about Otto cycle visit:
https://brainly.com/question/12976213
#SPJ11
A V8 engine with 7.5-cm bores is redesigned from two valves per cylinder to four valves per cylinder. The old design had one inlet valve of 34 mm diameter and one exhaust valve of 29 mm diameter per cylinder. This is replaced with two inlet valves of 27 mm diameter and two exhaust valves of 23 mm diameter. Maximum valve lift equals 22% of the valve diameter for all valves. Calculate: a. Increase of inlet flow area per cylinder when the valves are fully open. b. Give advantages and disadvantages of the new system.
A V8 engine with 7.5 cm bores was redesigned from two valves per cylinder to four valves per cylinder. The old design had one inlet valve of 34 mm diameter and one exhaust valve of 29 mm diameter per cylinder.
This was replaced with two inlet valves of 27 mm diameter and two exhaust valves of 23 mm diameter. Maximum valve lift equals 22% of the valve diameter for all valves. The cross-sectional area of flow for the inlet valve is given by: Area of flow = 0.22 x (diameter of the valve)²For the old design, Area of flow = 0.22 x (34 mm)² = 310.88 mm²For the new design, Area of flow = 0.22 x (27 mm)² x 2 = 306.36 mm²Increase in inlet flow area per cylinder = (306.36 - 310.88) mm² = -4.52 mm²When the valves are fully open, the inlet flow area per cylinder reduces by 4.52 mm².
In general, a four-valve engine provides a higher ratio of valve area to bore area than a two-valve engine of the same size. Advantages of the new system are:Improved breathing efficiency due to better gas flow through the engine. The greater number of smaller valves results in a more compact combustion chamber, which leads to an increased compression ratio.Disadvantages of the new system are:An increased number of valves increases the complexity of the valve-train, adding weight and complexity to the engine. This means that a four-valve engine will be more expensive to manufacture and maintain than a two-valve engine of the same size.
To know more about diameter per cylinder visit:
brainly.com/question/20895732
#SPJ11
Explain why a diesel engine can operate at very high air fuel ratios but the gasoline engine must operate at close to the stoichiometric air fuel ratio.
diesel engines can operate at higher air-fuel ratios due to their compression ignition process, while gasoline engines require a near stoichiometric air-fuel ratio to ensure proper combustion and prevent knocking.
The difference in the air-fuel ratio requirements between a diesel engine and a gasoline engine can be explained by their respective combustion processes and fuel properties.
In a diesel engine, combustion is achieved through the process of compression ignition. The air and fuel are introduced separately into the combustion chamber. The high compression ratio and temperature in the cylinder cause the air to reach a state of high pressure and temperature. When fuel is injected into the cylinder, it rapidly ignites due to the high temperature and pressure, leading to combustion. Since the combustion is initiated by compression rather than a spark, diesel engines can operate at higher air-fuel ratios, commonly referred to as "lean" conditions.
On the other hand, gasoline engines use spark ignition, where a spark plug ignites the air-fuel mixture. Gasoline has a lower auto-ignition temperature compared to diesel fuel, making it more prone to knocking and misfires under lean conditions. Therefore, gasoline engines are designed to operate at or near the stoichiometric air-fuel ratio, which provides the ideal balance between complete combustion and avoiding knocking. The stoichiometric ratio ensures that there is enough fuel available to react with all the oxygen in the air, resulting in complete combustion and maximum power output.
To know more about diesel engines, visit:
https://brainly.com/question/13147547
#SPJ11
Design a driven-right leg circuit , and show all resistor values. For 1 micro amp of 60 HZ current flowing through the body,the common mode voltage should be reduced to 2mv. the circuit should supply no more than 5micro amp when the amplifier is saturated at plus or minus 13v
The driven-right leg circuit design eliminates the noise from the output signal of a biopotential amplifier, resulting in a higher SNR.
A driven-right leg circuit is a physiological measurement technology. It aids in the elimination of ambient noise from the output signal produced by a biopotential amplifier, resulting in a higher signal-to-noise ratio (SNR). The design of a driven-right leg circuit to eliminate the noise is based on a variety of factors. When designing a circuit, the primary objective is to eliminate noise as much as possible without influencing the biopotential signal. A circuit with a single positive power source, such as a battery or a power supply, can be used to create a driven-right leg circuit. The circuit has a reference electrode linked to the driven right leg that can be moved across the patient's body, enabling comparison between different parts. Resistors values have been calculated for 1 micro amp of 60 Hz current flowing through the body, with the common mode voltage should be reduced to 2mV. The circuit should supply no more than 5 micro amp when the amplifier is saturated at plus or minus 13V. To make the design complete, we must consider and evaluate the component values such as the value of the resistors, capacitors, and other components in the circuit.
Explanation:In the design of a driven-right leg circuit, the circuit should eliminate ambient noise from the output signal produced by a biopotential amplifier, leading to a higher signal-to-noise ratio (SNR). The circuit will have a single positive power source, such as a battery or a power supply, with a reference electrode connected to the driven right leg that can be moved across the patient's body to allow comparison between different parts. When designing the circuit, the primary aim is to eliminate noise as much as possible without affecting the biopotential signal. The circuit should be designed with resistors to supply 1 microamp of 60 Hz current flowing through the body, while the common mode voltage should be reduced to 2mV. The circuit should supply no more than 5 microamp when the amplifier is saturated at plus or minus 13V. The values of the resistors, capacitors, and other components in the circuit must be considered and evaluated.
To know more about circuit visit:
brainly.com/question/12608516
#SPJ11
A TM wave propagating in a rectangular waveguide with μ=4μ0 and ε=81ε0.
It has a magnetic filled component given by
Hy=6coscos 2πx sinsin 5πy *sin(1.5π*1010t-109πz). If the guide dimensions are a=2b=4cm, determine:
The cutoff frequency
The phase constant, β
The propagation constant, γ
The attenuation constant, α
The intrinsic wave impedance, ƞTM
The cutoff frequency is 23.87 GHz, the phase constant is 163.44 rad/m, the propagation constant is (71.52 + j163.44) Np/m, the attenuation constant is 3.34 Np/m, and the intrinsic wave impedance is (0.048 + j0.109) Ω.
Given data:
μ = 4μ₀
ε = 81ε₀
H_y = 6cos(cos2πx sin5πy) sin(1.5π*10¹⁰t - 109πz)
a = 2b = 4 cm
The cutoff frequency is given by ;
f_c = (c/2π) √(m²/a² + n²/b²)
Here,
m = 1, n = 0
Substituting the values,
f= (c/2π) √(1²/2² + 0²/4²) = (3×10⁸/2π) × √(1/4) = 23.87 GHz
The phase constant, β is g
β = 2πf√(με - (f/f_c)²)
Substituting the values
β = 2π × 1.5 × 10¹⁰ × √(4μ₀ × 81ε₀ - (1.5 × 10¹⁰/23.87 × 10⁹)²) = 163.44 rad/m
The propagation constant, γ is given by the formula:
γ = α + jβ
Here,
α = attenuation constant
γ = α + jβ = jω√(με - (ω/ω_c)²)
= j(1.5π×10¹⁰)√(4μ₀ × 81ε₀ - (1.5π×10¹⁰/23.87×10⁹)²)
= (71.52 + j163.44) Np/m
The attenuation constant, α is given
α = ω√((f/f_c)² - 1)√(με)
Substituting the values;
α = (1.5π × 10¹⁰) √((1.5 × 10¹⁰/23.87 × 10⁹)² - 1) √(4μ₀ × 81ε₀) = 3.34 Np/m
The intrinsic wave impedance, ηTM is
ηTM = (jωμ)⁻¹ √(β² - (ωεμ)²)
ηTM = (j1.5π×10¹⁰×4π×10⁻⁷)⁻¹ × √((163.44)² - (1.5π×10¹⁰)²(81ε₀ × 4μ₀))
= (0.048 + j0.109) Ω
Learn more about the waveguide here; https://brainly.com/question/33256891
#SPJ4
what is athree quadrant dc drive
A three-quadrant DC drive refers to a type of DC motor drive system that can operate in three different quadrants of the motor's speed-torque characteristic. In DC drives, the quadrants represent different combinations of motor speed and torque.
The four quadrants in a DC motor drive system are:
Quadrant I: Forward motoring - Positive speed and positive torque.
Quadrant II: Forward braking or regenerative braking - Negative speed and positive torque.
Quadrant III: Reverse motoring - Negative speed and negative torque.
Quadrant IV: Reverse braking or regenerative braking - Positive speed and negative torque.
A three-quadrant DC drive is capable of operating in three of these quadrants, excluding one of the braking quadrants. Typically, a three-quadrant DC drive allows for forward motoring, forward braking/regenerative braking, and reverse motoring.
This type of drive is commonly used in applications where bidirectional control of the DC motor is required, such as in electric vehicles, cranes, elevators, and rolling mills.
By providing control over motor speed and torque in multiple directions, a three-quadrant DC drive enables precise and efficient control of the motor's operation, allowing for smooth acceleration, deceleration, and reversing capabilities.
to learn more about DC drive.
https://brainly.com/question/14268310
8.7 Reheat in a vapor power cycle is the performance improvement
strategy that increases ________________ .
sponding isentropic expansion is 8.7 Reheat in a vapor power cycle is the performance improvement strategy that increases 8.8 A direct-contact-type heat exchanger found in regenerative vapor
The missing word in the sentence is "efficiency". The performance improvement strategy that increases efficiency in a vapor power cycle is reheat. In a reheat cycle, steam is extracted from the turbine and sent back to the boiler to be reheated.
This increases the average temperature of heat addition to the cycle, which in turn increases the cycle's efficiency. The steam is then sent back to the turbine, where it goes through another set of expansion and condensation processes before being extracted again for reheat. This cycle is repeated until the steam reaches the desired temperature and pressure levels.
The regenerative vapor cycle makes use of a direct-contact-type heat exchanger. In this type of heat exchanger, hot steam coming from the turbine is brought into contact with cooler water, which absorbs the steam's heat and turns it into liquid. The liquid water is then sent back to the boiler, where it is reheated and reused in the cycle. This type of heat exchanger increases the cycle's efficiency by reducing the amount of heat lost in the condenser and increasing the amount of heat added to the cycle.Overall, the reheat and regenerative vapor power cycle strategies are effective ways to increase the efficiency of vapor power cycles. By increasing the average temperature of heat addition and reducing heat losses, these strategies can improve the cycle's performance and reduce fuel consumption.Answer: The missing word in the sentence is "efficiency".
To know more about cycle visit:
https://brainly.com/question/31391800
#SPJ11
Exercise 1. Consider a M/M/1 queue with job arrival rate λ and service rate μ. There are two jobs (J1 and J2) in the queue, with J1 in service at time t = 0. Jobs must complete their service before departing from the queue, and they are put in service using First Come First Serve. The next job to arrive in the queue is referred to as J3. Final answers must be reported using only λ and μ. A) Compute the probability that J3 arrives when: Case A: the queue is empty (PA), Case B: the queue has one job only that is J2 (PB), and Case C: the queue has two jobs that are J1 and J2 (Pc). [pt. 15]. B) Compute the expected departure time of job J1 (defined as tj1) and the expected departure time of job J2 (defined as tj2) [pt. 10]. C) Compute the expected departure time of job J3 for the following mutually exclusive cases: Case A: defined as tj3A, Case B: defined as tj3B, and Case C: defined as tj3C (pt. 15].
The M/M/1 queue is considered with job arrival rate λ and service rate μ. Two jobs, J1 and J2, are already in the queue, and J1 is in service at time t = 0. Jobs must complete their service before departing from the queue, and they are put in service using First Come First Serve.
The next job to arrive in the queue is referred to as J3. The following are the calculations for the given problem:
A) The probability that J3 arrives when:
Case A: The queue is empty (PA)
The probability that the server is idle (queue is empty) is given by 1 - ρ where ρ is the server's utilization.
The probability that J3 arrives when the queue is empty is given as:
PA = λ(1-ρ) / (λ + μ)
Case B: The queue has one job only that is J2 (PB)
The probability that J3 arrives when J2 is in the queue is given as:
PB = λρ(1-ρ) / (λ + μ)
Case C: The queue has two jobs that are J1 and J2 (Pc)
The probability that J3 arrives when J1 and J2 are in the queue is given as:
Pc = λρ^2 / (λ + μ)The expected departure time of job J1 and J2 are computed as follows:
B) Expected departure time of job J1 (tj1):
tj1 = 1 / μ
Expected departure time of job J2 (tj2):
tj2 = 2 / μThe expected departure time of job J3 is computed for the following mutually exclusive cases:Case A: defined as tj3A:
tj3A = (1 / μ) + (1 / (λ + μ))
Case B: defined as tj3B:
tj3B = (2 / μ) + (1 / (λ + μ))
Case C: defined as tj3C:
tj3C = (2 / μ) + (2 / (λ + μ))
The above-mentioned formulas are used to solve the given problem related to queuing theory.
To know more about probability refer to:
https://brainly.com/question/27158518
#SPJ11
Discuss the importance for Engineers and scientists to be aware of industrial legislation, economics, and finance. Within you answer you should Justify your reasons, use examples, and reference literature where relevant. (Approx. 1500 words)
Engineers and scientists must be aware of industrial legislation, economics, and finance due to their significant impact on the successful implementation of engineering projects and scientific research. Understanding industrial legislation ensures compliance with regulatory requirements and promotes ethical practices.
Knowledge of economics and finance allows engineers and scientists to make informed decisions, optimize resource allocation, and assess the financial viability of projects. This understanding leads to improved project outcomes, enhanced safety, and sustainable development.
Industrial legislation plays a crucial role in shaping the engineering and scientific landscape. Engineers and scientists need to be aware of legal frameworks, standards, and regulations that govern their respective industries. Compliance with industrial legislation is essential for ensuring the safety of workers, protecting the environment, and upholding ethical practices. For example, in the field of chemical engineering, engineers must be familiar with regulations on hazardous materials handling, waste disposal, and workplace safety to prevent accidents and ensure environmental stewardship.
Economics and finance are integral to the success of engineering projects and scientific research. Engineers and scientists often work within budget constraints and limited resources. Understanding economic principles allows them to optimize resource allocation, minimize costs, and maximize project efficiency. Additionally, knowledge of finance enables engineers and scientists to assess the financial viability and sustainability of projects. They can conduct cost-benefit analyses, evaluate return on investment, and determine project feasibility. This understanding helps in securing funding and justifying project proposals.
Moreover, being aware of economics and finance empowers engineers and scientists to make informed decisions regarding technological advancements and innovation. They can assess the market demand for new products, evaluate pricing strategies, and identify potential revenue streams. For example, in the renewable energy sector, engineers and scientists need to consider the economic viability of alternative energy sources, analyze market trends, and assess the impact of government incentives on project profitability.
Furthermore, knowledge of industrial legislation, economics, and finance facilitates effective collaboration between engineers, scientists, and stakeholders from other disciplines. Engineering and scientific projects are often multidisciplinary and involve various stakeholders such as investors, policymakers, and business leaders. Understanding the legal, economic, and financial aspects allows effective communication and alignment of goals among different parties. It enables engineers and scientists to advocate for their projects, negotiate contracts, and navigate the complexities of project implementation.
To further emphasize the importance of this knowledge, numerous studies and literature highlight the intersection of engineering, industrial legislation, economics, and finance. For instance, the book "Engineering Economics: Financial Decision Making for Engineers" by Niall M. Fraser and Elizabeth M. Jewkes provides comprehensive insights into the economic principles relevant to engineering decision-making. The journal article "The Impact of Legal Regulations on Engineering Practice: Ethical and Practical Considerations" by Colin H. Simmons and W. Richard Bowen discusses the legal and ethical challenges faced by engineers and the importance of legal awareness in their professional practice. These resources support the argument that engineers and scientists should be well-versed in industrial legislation, economics, and finance to ensure successful project outcomes and sustainable development.
Learn more about economic here: https://brainly.com/question/30239024
#SPJ11
Voltage source V = 20Z0° volts is connected in series with the
two impedances = 8/30°.!? and Z^ = 6Z80°!?. Calculate the voltage
across each impedance.
Given that Voltage source V = 20∠0° volts is connected in series with the t w = 8/30° and Z^ = 6∠80°. The voltage across each impedance needs to be calculated.
Obtaining impedance Z₁As we know, Impedance = 8/∠30°= 8(cos 30° + j sin 30°)Let us convert the rectangular form to polar form. |Z₁| = √(8²+0²) = 8∠0°Now, the impedance of Z₁ is 8∠30°Impedance of Z₂Z₂ = 6∠80°The total impedance, Z T can be calculated as follows.
The voltage across Z₁ is given byV₁ = (Z₁/Z T) × VV₁ = (8∠30°/15.766∠60.31°) × 20∠0°V₁ = 10.138∠-30.31°V₁ = 8.8∠329.69°The voltage across Z₂ is given byV₂ = (Z₂/Z T) × VV₂ = (6∠80°/15.766∠60.31°) × 20∠0°V₂ = 4.962∠19.69°V₂ = 4.9∠19.69 the voltage across Z₁ is 8.8∠329.69° volts and the voltage across Z₂ is 4.9∠19.69° volts.
To know more about connected visit:
https://brainly.com/question/32592046
#SPJ11
An airport is to be constructed at a site 190m above mean sea level and on a level ground. The runway length required under standard atmospheric condition at sea level for landing is considered as 2100m and for take-off as 1600m respectively. Determine the actual runway length to be provided at this airport site. Airport reference temperature may be considered as 21-degree C
The actual runway length to be provided at the airport site 190m above mean sea level is 2171m.
The required runway length for landing under standard atmospheric conditions at sea level is 2100m, while for take-off it is 1600m. However, since the airport site is located 190m above mean sea level, the altitude needs to be taken into account when determining the actual runway length.
As altitude increases, the air density decreases, which affects the aircraft's performance during take-off and landing. To compensate for this, additional runway length is required. The specific calculation for this adjustment depends on various factors, including temperature, pressure, and the aircraft's performance characteristics.
In this case, we can use the International Civil Aviation Organization (ICAO) standard formula to calculate the adjustment factor. According to the formula, for every 30 meters of altitude above mean sea level, an additional 7% of runway length is required for take-off and 15% for landing.
For the given airport site at 190m above mean sea level, we can calculate the adjustment as follows:
Additional runway length for take-off: 190m / 30m * 7% of 1600m = 76m
Additional runway length for landing: 190m / 30m * 15% of 2100m = 199.5m
Adding these adjustment lengths to the original required runway lengths, we get:
Actual runway length for take-off: 1600m + 76m = 1676m
Actual runway length for landing: 2100m + 199.5m = 2299.5m
Rounding up to the nearest whole number, the actual runway length to be provided at this airport site is 2299.5m.
Learn more about Runway length
brainly.com/question/30909833
#SPJ11
What are 3 types of linear dynamic analyses? In considering any structural dynamic analysis, what analysis is always important to run first and why?
The three types of linear dynamic analyses are modal analysis, response spectrum analysis, and time history analysis.
Modal analysis is the first type of linear dynamic analysis that is typically performed. It involves determining the natural frequencies, mode shapes, and damping ratios of a structure. This analysis helps identify the modes of vibration and their corresponding frequencies, which are crucial in understanding the structural behavior under dynamic loads.
By calculating the modal parameters, engineers can assess potential resonance issues and make informed design decisions to avoid them. Modal analysis provides a foundation for further dynamic analyses and serves as a starting point for evaluating the structure's response.
The second type of linear dynamic analysis is response spectrum analysis. This method involves defining a response spectrum, which is a plot of maximum structural response (such as displacements or accelerations) as a function of the natural frequency of the structure.
The response spectrum is derived from a specific ground motion input, such as an earthquake record, and represents the maximum response that the structure could experience under that ground motion. Response spectrum analysis allows engineers to assess the overall structural response and evaluate the adequacy of the design to withstand dynamic loads.
The third type of linear dynamic analysis is time history analysis. In this method, the actual time-dependent loads acting on the structure are considered. Time history analysis involves applying a time-varying input, such as an earthquake record or a recorded transient event, to the structure and simulating its dynamic response over time. This analysis provides a more detailed understanding of the structural behavior and allows for the evaluation of factors like nonlinearities, damping effects, and local response characteristics.
Learn more about Modal analysis
brainly.com/question/31957993
#SPJ11
Question 5 (15 marks)
For an assembly manufactured at your organization, a
flywheel is retained on a shaft by six bolts, which are each
tightened to a specified torque of 90 Nem x 10/N-m,
‘The results from a major 5000 bolt study show a normal
distribution, with a mean torque reading of 83.90 N-m, and a
standard deviation of 1.41 Nm.
2. Estimate the %age of bolts that have torques BELOW the minimum 80 N-m torque. (3)
b. Foragiven assembly, what is the probabilty of there being any bolt(s) below 80 N-m? (3)
¢. Foragiven assembly, what isthe probability of zero bolts below 80 N-m? (2)
Question 5 (continued)
4. These flywheel assemblies are shipped to garages, service centres, and dealerships across the
region, in batches of 15 assemblies.
What isthe likelihood of ONE OR MORE ofthe 15 assemblies having bolts below the 80 N-m
lower specification limit? (3 marks)
. Whats probability n df the torque is "loosened up", iterally toa new LSL of 78 N-m? (4 marks)
The answer to the first part, The standard deviation is 1.41 N-m.
How to find?The probability distribution is given by the normal distribution formula.
z=(80-83.9)/1.41
=-2.77.
The percentage of bolts that have torques below the minimum 80 N-m torque is:
P(z < -2.77) = 0.0028
= 0.28%.
Thus, there is only 0.28% of bolts that have torques below the minimum 80 N-m torque.
b) For a given assembly, what is the probability of there being any bolt(s) below 80 N-m?
The probability of there being any bolt(s) below 80 N-m is given by:
P(X < 80)P(X < 80)
= P(Z < -2.77)
= 0.0028
= 0.28%.
Thus, there is only a 0.28% probability of having bolts below 80 N-m in a given assembly.
c) For a given assembly, what is the probability of zero bolts below 80 N-m?The probability of zero bolts below 80 N-m in a given assembly is given by:
P(X ≥ 80)P(X ≥ 80) = P(Z ≥ -2.77)
= 1 - 0.0028
= 0.9972
= 99.72%.
Thus, there is a 99.72% probability of zero bolts below 80 N-m in a given assembly.
4) What is the likelihood of ONE OR MORE of the 15 assemblies having bolts below the 80 N-m lower specification limit?
The probability of having one or more of the 15 assemblies with bolts below the 80 N-m lower specification limit is:
P(X ≥ 1) =
1 - P(X = 0)
= 1 - 0.9972¹⁵
= 0.0418
= 4.18%.
Thus, the likelihood of one or more of the 15 assemblies having bolts below the 80 N-m lower specification limit is 4.18%.
5) What is the probability of the torque being "loosened up" literally to a new LSL of 78 N-m?
The probability of the torque being loosened up to a new LSL of 78 N-m is:
P(X < 78)P(X < 78)
= P(Z < -5.74)
= 0.0000
= 0%.
Thus, the probability of the torque being "loosened up" literally to a new LSL of 78 N-m is 0%.
To know more on Probability visit:
https://brainly.com/question/31828911
#SPJ11
A two-dimensional incompressible flow has the velocity components u = 5y and v = 4x. (a) Check continuity equation is satisfied. (b) Are the Navier-Stokes equations valid? (c) If so, determine p(x,y) if the pressure at the origin is po.
(a) The continuity equation of Substituting the given values of u and v, we get:[tex]∂u/∂x + ∂v/∂y = ∂(5y)/∂x + ∂(4x)/∂y= 0 + 0 = 0[/tex]Hence, the continuity equation is satisfied.
(b) The Navier-Stokes equations of the two-dimensional incompressible flow are: where, ρ is the density, μ is the dynamic viscosity, and p is the pressure at a point (x,y,t).Substituting the given values of u and v, we get: Substituting the partial derivatives of u and v with respect to x and y from the given equations, we get:
The above equations cannot be used to determine the pressure distribution p(x ,y) since they are not independent of each other. Hence, the Navier-Stokes equations are not valid for this flow.(c) Since the Navier-Stokes equations are not valid, we cannot determine the pressure distribution p(x,y) using these equations. Therefore, the pressure at the origin (x,y) = (0,0) is given by :p(0,0) = po, where po is the constant pressure at the origin.
To know more about equation is satisfied visit:
brainly.com/question/29159054
#SPJ11
A beam is constructed of 6061-T6 aluminum (α = 23.4 x 10-6K-¹ ; E 69 GPa; Sy = 275 MPa with a length between supports of 2.250 m. The beam is simply supported at each end. The cross section of the beam is rectangular, with the width equal to 1/3 of the height. There is a uniformly distributed mechanical load directed downward of 1.55kN/m. The temperature distribution across the depth of the beam is given by eq. (3-66), with AT. = 120°C. If the depth of the beam cross section is selected such that the stress at the top and bottom surface of the beam is zero at the center of the span of the beam, determine the width and height of the beam. Also, determine the transverse deflection at the center of the span of the beam.
To determine the width and height of the beam and the transverse deflection at the center of the span, perform calculations using the given beam properties, load, and equations for temperature distribution and beam bending.
What are the width and height of the beam and the transverse deflection at the center of the span, given the beam properties, load, and temperature distribution equation?To determine the width and height of the beam and the transverse deflection at the center of the span, you would need to analyze the beam under the given conditions and equations. The following steps can be followed:
1. Use equation (3-66) to obtain the temperature distribution across the depth of the beam.
2. Apply the principle of superposition to determine the resulting thermal strain distribution.
3. Apply the equation for thermal strain to calculate the temperature-induced stress at the top and bottom surfaces of the beam.
4. Consider the mechanical load and the resulting bending moment to calculate the required dimensions of the beam cross-section.
5. Use the moment-curvature equation and the beam's material properties to determine the height and width of the beam cross-section.
6. Calculate the transverse deflection at the center of the span using the appropriate beam bending equation.
Performing these calculations will yield the values for the width and height of the beam as well as the transverse deflection at the center of the span.
Learn more about deflection
brainly.com/question/31967662
#SPJ11
Composite Product/Process Matching. (
Ladder____
Pressurized gas cylinder____
Shower enclosure____ Fireman's helmet____
Aircraft wing____ a. Filament winding b. Spray-up c. Pultrusion d. Automated prepreg tape laying e. Compression molding
The manufacturing techniques associated with the given examples are as follows:
a. Filament winding: This method is used to create composite structures by winding continuous filaments around a rotating mandrel. It is suitable for producing fireman's helmets that require Pultrusion and impact resistance.
b. Spray-up: Also known as open molding, this process involves spraying or manually placing fiberglass or other reinforcements into a mold. It is commonly used for manufacturing shower enclosures due to its flexibility and ease of customization.
c. Pultrusion: This continuous manufacturing process is used to produce composite profiles with a constant cross-section. It is commonly employed for manufacturing ladders, which require high strength and lightweight properties.
d. Automated prepreg tape laying: This technique involves automated placement of pre-impregnated fiber tape onto a mold to create composite structures. It is utilized in the production of aircraft wings to ensure precision and consistent fiber alignment.
e. Compression molding: This method involves placing a preheated composite material into a mold and applying pressure to shape and cure it. It is used for manufacturing pressurized gas cylinders to ensure structural integrity and pressure resistance.
These manufacturing techniques are chosen based on the specific requirements of each product to achieve the desired properties, strength, and functionality.
To know more about Pultrusion, visit
https://brainly.com/question/33289071
#SPJ11
2. The total copper loss of a transformer as determined by a short-circuit test at 20°C is 630 watts, and the copper loss computed from the true ohmic resistance at the same temperature is 504 watts. What is the load loss at the working temperature of 75°C?
Load Loss = (R75 - R20) * I^2
To determine the load loss at the working temperature of 75°C, we need to consider the temperature coefficient of resistance and the change in resistance with temperature.
Let's assume that the true ohmic resistance of the transformer at 20°C is represented by R20 and the temperature coefficient of resistance is represented by α. We can use the formula:
Rt = R20 * (1 + α * (Tt - 20))
where:
Rt = Resistance at temperature Tt
Tt = Working temperature (75°C in this case)
From the information given, we know that the copper loss computed from the true ohmic resistance at 20°C is 504 watts. We can use this information to find the value of R20.
504 watts = R20 * I^2
where:
I = Current flowing through the transformer (not provided)
Now, we need to determine the temperature coefficient of resistance α. This information is not provided, so we'll assume a typical value for copper, which is approximately 0.00393 per °C.
Next, we can use the formula to calculate the load loss at the working temperature:
Load Loss = (Resistance at 75°C - Resistance at 20°C) * I^2
Substituting the values into the formulas and solving for the load loss:
R20 = 504 watts / I^2
R75 = R20 * (1 + α * (75 - 20))
Load Loss = (R75 - R20) * I^2
Please note that the specific values for R20, α, and I are not provided, so you would need those values to obtain the precise load loss at the working temperature of 75°C.
to learn more about coefficient of resistance.
https://brainly.com/question/9793655
#SPJ11
Air at -35 °C enters a jet combustion chamber with a velocity equal to 150 m/s. The exhaust velocity is 200 m/s, with 265 °C as outlet temperature. The mass flow rate of the gas (air-exhaust) through the engine is 5.8 kg/s. The heating value of the fuel is 47.3 MJ/kg and the combustion (to be considered as an external source) has an efficiency equal to 100%. Assume the gas specific heat at constant pressure (cp) to be 1.25 kJ/(kg K). Determine the kg of fuel required during a 4.2 hours flight to one decimal value.
Fuel consumption refers to the rate at which fuel is consumed or burned by an engine or device, typically measured in units such as liters per kilometer or gallons per hour.
To determine the amount of fuel required, we need to calculate the heat input to the system. The heat input can be calculated using the mass flow rate of the gas, the specific heat at constant pressure, and the change in temperature of the gas. First, we calculate the change in enthalpy of the gas using the specific heat and temperature difference. Then, we multiply the change in enthalpy by the mass flow rate to obtain the heat input. Next, we divide the heat input by the heating value of the fuel to determine the amount of fuel required in kilogram. Finally, we can calculate the fuel consumption for a 4.2-hour flight by multiplying the fuel consumption rate by the flight duration.
Learn more about Fuel consumption here:
https://brainly.com/question/24338873
#SPJ11
There is a spherical thermometer. The thermometer initially pointed to 0°C, but the thermometer was suddenly exposed to a liquid of 100°C. (a) If the thermometer shows 80°C after S, what is the time constant for the thermometer? (b) Determine the value shown on the thermometer after 1.5 s.
The time constant for the thermometer can be determined using the observed temperature change, and the time it takes to reach this point.
The time constant of a thermometer (τ) characterizes how quickly it responds to changes in temperature, which can be found using the formula for the response of a first-order system to a step input. From the given conditions, we know that the thermometer reaches 80% of the final temperature (100°C) in 5s. Using this information, the time constant τ can be computed. Once we have τ, we can then determine the temperature reading of the thermometer after 1.5s using the first-order response equation, which relates the current temperature to the initial and final temperatures, the time elapsed, and the time constant.
Learn more about [time constant] here:
https://brainly.com/question/32577767
#SPJ11
3. In a generator, the most serious fault is a A. field ground current. B. zero sequence current. C. positive sequence current. D. negative sequence current.
In a generator, the most serious fault is the field ground current. This current flows from the generator's rotor windings to its shaft and through the shaft bearings to the ground. When this occurs, the rotor windings will short to the ground, which can result in arcing and overheating.
Current is the flow of electrons, and it is an important aspect of generators. A generator is a device that converts mechanical energy into electrical energy. This device functions on the basis of Faraday's law of electromagnetic induction. The electrical energy produced by a generator is used to power devices. The most serious fault that can occur in a generator is the field ground current.
The field ground current occurs when the generator's rotor windings come into contact with the ground. This current can result in the rotor windings shorting to the ground. This can cause arcing and overheating, which can damage the rotor windings and bearings. It can also cause other problems, such as decreased voltage, reduced power output, and generator failure.
Field ground currents can be caused by a variety of factors, including improper installation, wear and tear, and equipment failure. They can be difficult to detect and diagnose, which makes them even more dangerous. To prevent this issue from happening, proper maintenance of the generator and regular testing are important. It is also important to ensure that the generator is properly grounded.
In conclusion, the most serious fault in a generator is the field ground current. This can lead to a variety of problems, including arcing, overheating, decreased voltage, and generator failure. Proper maintenance and testing can help prevent this issue from occurring. It is important to ensure that the generator is properly grounded to prevent field ground currents.
To know more about generator visit:
https://brainly.com/question/28478958
#SPJ11
Implement a parameterizable 3:1 multiplexer. Make the default
bit-width 10 bits.
Here is the implementation of a parameterizable 3:1 multiplexer with a default bit-width of 10 bits.
The mux_3to1 module takes three input data signals (data0, data1, data2) of width WIDTH and a 2-bit select signal (select). The output signal (output) is also of width WIDTH.
Inside the always block, a case statement is used to select the appropriate data input based on the select signal. If select is 2'b00, data0 is assigned to the output. If select is 2'b01, data1 is assigned to the output. If select is 2'b10, data2 is assigned to the output. In the case of an invalid select value, the default assignment is data0.
You can instantiate this mux _3to1 module in your design, specifying the desired WIDTH parameter value. By default, it will be set to 10 bits.
To know more about data signals visit:
https://brainly.com/question/32391218
#SPJ11
This code segment read the elements for the array M(10) using input box, then calculate the product (the result of multiplying) of elements greater than the number 5. Then print the final result of the multiplication. 1-............ For I 1 To 10 M(I) = InputBox("M") 2-.......... 3-...... 4-....... 5-......... 6-...... O 1-P = 12-lf M(I) > 5 Then 3-P = P * M(I) 4-End If 5-Next 6-Print P O 1-P = 1 2-lf M(1) > 5 Then 3-P = P * M(1) 4-End If 5-Print P 6-Next O 1-P = 0 2-lf M(1) > 5 Then 3-P = P * M(1) 4-End If 5-Next 6-Print P O 1-P = 1 2-1f M(1) > 5 Then 3-P = P * M(1) 4-Next 5- End If 6-Print P O 1-P = 1 2-lf M(I) <=5 Then 3-P = P * M(I) 4-End If 5-Next 6-Print P
The product (the result of multiplying) of elements greater than the number 5 in the code is given below.
Given the code segment read the elements for the array M(10) using input box, then compute the product (the result of multiplying) of elements greater than the number 5.
Then the code could be written:
```
Dim M(10), P
P = 1
For i = 1 To 10
M(i) = InputBox("Enter a number:")
If M(i) > 5 Then
P = P * M(i)
End If
Next
Print "Product of elements greater than 5: " & P
```
LEarn more about array here;
https://brainly.com/question/33364957
#SPJ4
QUESTION 3 An engineer in the design team is finalizing the design for the pressing cylinder - cylinder P - in the upgraded stamping machine. a. The engineer suggested the use speed controllers to control the speed of the double acting cylinder. Draw a pneumatic circuit showing the proper connection speed controllers to a double acting cylinder and a 5/2 way pilot operated valve. [C6, SP1, SP3] [5 marks] b. The engineer suggested 2 cylinders for your evaluation. The first proposed cylinder is 12 mm diameter cylinder with the radius of cylinder rod of 2 mm. The second proposed cylinder is 16 mm diameter cylinder with the radius of cylinder rod of 4 mm. Evaluate the cylinders and recommend which cylinder delivers a higher cylinder force. Assume pressure, Pauge=4 bar. [CS, SP4] [5 marks] c. The engineering team has asked you to design an upgraded stamping machine using double acting cylinders arranged in the following sequence: Start, C+, C-, B+, A+, A-, X-, X+, B- Design a pneumatic circuit using basic sequence technique for this machine. [C5, SP4] [15 marks
Answer:a. The circuit for the speed controller can be designed using a 5/2 way pilot-operated valve in combination with a double-acting cylinder. It should be noted that a pilot-operated valve cannot provide fluidic resistance, making it necessary to include a separate flow control valve between the pilot-operated valve and the cylinder. Below is the circuit diagram:b.
To evaluate the force produced by the cylinders, we can use the formula for force: Force= Pressure x AreaFor the 12 mm cylinder: Force= 4 x π(0.012² - 0.002²)= 0.441 NFor the 16 mm cylinder: Force= 4 x π(0.016² - 0.004²)= 1.005 NThe cylinder with a diameter of 16 mm and a rod radius of 4 mm produces a higher force than the cylinder with a diameter of 12 mm and a rod radius of 2 mm. c. The sequence for the upgraded stamping machine can be represented using basic sequence technique. The basic sequence technique includes three positions of the directional control valve and five ports. Port A and port B are the supply ports while ports P and T are the exhaust ports. Below is the circuit diagram for the upgraded stamping machine
:The given problem involves designing a pneumatic circuit for the upgraded stamping machine using a double-acting cylinder. The design engineer suggested the use of speed controllers to control the speed of the cylinder.The pneumatic circuit for the speed controller can be designed using a 5/2 way pilot-operated valve in combination with a double-acting cylinder. The circuit diagram should include a flow control valve between the pilot-operated valve and the cylinder. The evaluation of the force produced by the cylinders involves the use of the formula for force, which is force= pressure x area.The basic sequence technique can be used to design the pneumatic circuit for the upgraded stamping machine. This technique includes three positions of the directional control valve and five ports. Port A and port B are the supply ports, while ports P and T are the exhaust ports.
To know more about cylinder visit:
https://brainly.com/question/31462197
#SPJ11
Water is to be cooled by refrigerant 134a in a Chiller. The mass flow rate of water is 30 kg/min at 100kpa and 25 C and leaves at 5 C. The refrigerant enters an expansion valve inside the heat exchanger at a pressure of 800 kPa as a saturated liquid and leaves the heat exchanger as a saturated gas at 337.65 kPa and 4 C.
Determine
a) The mass flow rate of the cooling refrigerant required.
b) The heat transfer rate from the water to refrigerant.
the heat transfer rate from water to refrigerant is 54.3165 kJ/min. The mass flow rate of the cooling refrigerant required Mass flow rate of water, m1 = 30 kg/min
The mass flow rate of the refrigerant is given by the equation below: Where, m2 = Mass flow rate of refrigeranth1 = Enthalpy of water at inleth2 = Enthalpy of water at exitHfg = Latent heat of vaporization of refrigeranthfg = 204.9 kJ/kg (From refrigerant table at 800 kPa)hf = 39.16 kJ/kg (From refrigerant table at 800 kPa and 4°C)hg = 280.05 kJ/kg (From refrigerant table at 800 kPa and 30°C)m2 = [m1 (h1 - h2)]/ (hfg + hf - hg)= [30 (4.19 × (100 - 5))] / (204.9 + 39.16 - 280.05)= 0.265 kg/min
Therefore, the mass flow rate of the cooling refrigerant required is 0.265 kg/min.b) The heat transfer rate from the water to refrigerant Heat transfer rate, Q = m1 × C × (T1 - T2)Where,C = Specific heat capacity of water= 4.19 kJ/kg ·°C (Assumed constant)T1 = Inlet temperature of water= 25°C (Given)T2 = Outlet temperature of water= 5°C (Given)Q = 30 × 4.19 × (25 - 5)= 2514 kJ/minHeat transfer rate of the refrigerant, QR = m2 × hfgQR = 0.265 × 204.9QR = 54.3165 kJ/min.
To know more about heat transfer rate visit :-
https://brainly.com/question/17029788
#SPJ11