Explain why all glassware must be dry and the solvent anhydrous during formation and reaction of a Grignard reaction. Explain why it is advisable to not clean your glassware with acetone before a Grignard reaction. Include balanced chemical equations in your answer. (4 pts)

Answer: N2(g) + 3H2(g)- >2NH3(g) denotes a negative entropy change.

Explanation:

Entropy is defined as the extent of disorder in a system. The degree of entropy is more in a gas and less in a solid.

Here, 1st reaction produces ammonia from nitrogen and hydrogen. We can see that four moles of gases produces 2 moles of gaseous product. So the degree of disorder in the system is decreasing. So the entropy is also decreasing.

Answer:

22

Explanation:

22

Answer:

Option D. AlCl₃, MgC₂

Explanation:

We need to dissociate all the salts, to determine the i. (Van't Hoff factor).

The salt who has the highest value, will be the better conductor of electricity

CsCl  → Cs⁺  +  Cl⁻   i = 2

CaCl → Ca²⁺ +  Cl⁻   i = 2

CaS → Ca²⁺ +  S⁻²    i = 2

Li₂S → 2Li⁺  +  S⁻²    i = 3

KBr →  K⁺  +  Br⁻       i = 2

AlCl₃ →  Al³⁺ + 3Cl⁻   i = 4

MgC₂  →  Mg²⁺  +  2C⁻   i = 3

KI  →  K⁺  +  I⁻     i = 2

K₂S  →  2K⁺  + S⁻²   i = 3

The biggest i, is in pair D.

Answer:

Look at the Screenshot!!!

Explanation:

Got it right on Odessyware ;) Have a nice day!!!!!

Answer: The molality of this solution is 1.7 m

Explanation:

Depression in freezing point:

[tex]T_f^0-T^f=i\times k_f\times m[/tex]

where,

[tex]T_f[/tex] = freezing point of solution = [tex]-70.55^0C[/tex]

[tex]T_f^0[/tex] = freezing point of pure chloroform = [tex]-63.5^0C[/tex]

[tex]k_f[/tex] = freezing point constant of benzene = [tex]4.07^0Ckg/mol[/tex]

m = molality

i = Van't Hoff factor = 1 (for non-electrolyte)

[tex]-63.5-(-70.55)^0C=1\times 4.07^0Ckg/mol\times m[/tex]

[tex]7.05=1\times 4.07^0Ckg/mol\times m[/tex]

[tex]m=1.7[/tex]

Thus the molality of this solution is 1.7 m

Answer:

[tex]molarity =6.9\times 10^{-3}\ M\\[/tex]

Explanation:

We know that , the reaction of HCl and NaOH is given as follows

[tex]NaOH+HCl=NaCl +H_2O[/tex]

Given that

Pressure = 111 mm Hg

[tex]P=111\times 13.6\times 10^{-3}\times 9.81\times 1000=14.809\ kPa[/tex]

Temperature = 20°C

T=20+273=293 K

Volume= 221 m L

V=0.221 L

Number of moles of HCl is given as follows

[tex]n=\dfrac{P\times V}{R\times T}\\n=\dfrac{0.148\times 0.221}{0.821\times 293}=1.3\times 10^{-4}\ moles[/tex]

From the above reaction we can say that

Number of moles of HCl=Number of moles of NaOH

Volume of NaoH is given as follows

V=18.7 = 0.0187 L

Therefore molarity

[tex]molarity =\dfrac{n}{V_{NaOH}}\\molarity =\dfrac{1.3\times 10^{-4}}{0.0187}=6.9\times 10^{-3}\ M\\molarity =6.9\times 10^{-3}\ M\\[/tex]

Add minisatellites. Hence, option C is correct.

Electrophoresis is a laboratory technique used to separate DNA, RNA or protein molecules based on their size and electrical charge.

You are a forensic scientist working on a murder case. You have taken the blood sample from the crime scene and put it through Electrophoresis and Southern blotting. you need to add minisatellites.

Hence, option C is correct.

Learn more about Electrophoresis here:

https://brainly.com/question/13949940

#SPJ2

Answer:

The correct answer is 5021.25 kJ/mol octane

Explanation:

The heat absorbed by the calorimeter is given by:

heat absorbed = Ccal x ΔT

Given:

Ccal = 6.18 kJ/ºC (heat capacity of calorimeter)

ΔT= Final temperature - initial temperature = 41.5ºC-22.0ºC = 19.5ºC

We first calculate the heat absorbed:

heat absorbed = 6.18 kJ/ºC x 19.5ºC = 120.51 kJ

The change in internal energy (ΔE) is equal to the heat absorbed by the calorimeter. In order to determine ΔE in kJ/mol we have to divide the heat into the number of moles of octane (C₈H₁₈) burned in the calorimeter.

Molecular weight (C₈H₁₈) = (12 g/mol x 8) + (1 g/mol x 18) = 114 g/mol

Moles of C₈H₁₈= mass/molecular weight= (2.75 g)/(114 g/mol)= 0.024 moles

Finally, we calculate ΔE:

ΔE = heat absorbed/moles of octane = (120.51 kJ)/(0.024 mol octane) = 5021.25 kJ/mol octane

Answer:

Initial volume of the container (V1) = 1.27 L (Approx)

Explanation:

Given:

Number of mol (n1) = 5.67 x 10⁻²

Number of mol (n2) = (5.67 +2.95) x 10⁻² = 8.62 x 10⁻²

New volume (V2) = 1.93 L

Find:

Initial volume of the container (V1)

Computation:

Using Avogadro's law

V1 / n1 = V2 / n2

V1 / 5.67 x 10⁻² = 1.93 / 8.62 x 10⁻²

V1 = 10.9431 / 8.62

Initial volume of the container (V1) = 1.2695

Initial volume of the container (V1) = 1.27 L (Approx)

Answer: 1.27 L

Explanation:

First, calculate the final number of moles of propane (n2) in the container.

n2 = n1 + nadded = 5.67 × 10^−2 mol + 2.95 × 10^−2 mol = 8.62 × 10^−2 mol

Rearrange Avogadro's law to solve for V1.

V1 = V2 × n1 / n2

Substitute the known values of n1, n2, and V2,

V1 = 1.93 L × 5.67 × 10^−2 mol / 8.62 × 10^−2 mol = 1.27 L

Answer:

Option D. T

Explanation:

Enthalpy change (ΔH) is simply the difference between the heat content of the product (Hp) and the heat content of the reactant (Hr). Mathematically, it is expressed as:

Enthalpy change (ΔH) = Heat of product (Hp) – heat of reactant (Hr)

ΔH = Hp – Hr

From the diagram given above, the difference between the heat content of product and the heat content of reactant is T.

Therefore, the enthalpy change of the reaction is T.

Answer:

Protons, Electrons, Neutrons

Explanation:

Neutron: 0 or Neutral

Electron: -1 or Negative

Proton: +1 or Positive

For proton and neutron look at neutr for neutral and p for positive

Answer:

❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️

The answer is Protons, Electrons, Neutrons

There is three of them.....

Hope this will help you

❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️

Explanation:

Answer: 0.938 moles of [tex]ZnCl_2[/tex] will be produced.

Explanation:

To calculate the moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text {Molar mass}}[/tex]

moles of zinc:

[tex]\text{Number of moles}=\frac{61.0g}{65g/mol}=0.938moles[/tex]

[tex]Zn+2HCl\rightarrow ZnCl_2+H_2[/tex]

As HCl  is in excess , zinc is the limiting reagent and it limits the formation of product.

According to stoichiometry :

1 mole of Zn produce =  1 mole of [tex]ZnCl_2[/tex]

Thus moles of  Zn produce = [tex]\frac{1}{1}\times 0.938=0.938[/tex] moles of [tex]ZnCl_2[/tex]

Thus 0.938 moles of [tex]ZnCl_2[/tex] will be produced.

Answer:

27. Element (Because it contains all same atoms)

28. Compound (It contains atoms held together through chemical bonds)

29. Element (it contains all same atoms)

33. Mixture (It contains different atoms but they are not held together through chemical means)

34. Compound (Different atoms held together through chemical means)

35. Mixture (Mixture of elements and compounds)

30. Element (it contains all same atoms)

31. Mixture (Mixture of elements and compounds)

32. Element (Contain all same atoms although held together through chemical means they are not compounds)

Answer:

D; Iónico

Explanation:

El elemento con 8 protones es oxígeno, mientras que el elemento con 11 protones es sodio.

El sodio es un metal alcalinotérreo, mientras que el oxígeno no es un metal.

En general, cuando tenemos un elemento metálico como el sodio, que se une con uno no metálico como el oxígeno, el tipo de enlace formado como resultado de la transferencia completa de electrones desde la capa de valencia del sodio a la capa de valencia del oxígeno para completar su propia configuración de octeto se denomina enlace electrovalente o, más generalmente, enlace iónico

Answer:

Basic

Explanation:

The pH scale is a scale that tells us about the concentration of hydrogen ions in a solution.

Acids have many hydrogen ions. Acids have a pH of less than 7.

Bases have fewer hydrogen ions and more hydroxide ions.  Bases have a pH of less than 14.

If the solution has a pH of exactly 7, then it is pure water. Water has the same concentration of hydrogen and hydroxide ions.

The antacid tablet has a pH of roughly 9.5 Since this is less than 14, but not equal to or less than 7, this must be an base. Therefore, it is considered to be in the basic range.

Answer:

9.5 is a base

Explanation:

A ph of less than 7 is an acid

7 is neutral

7 to 14 is a base

9.5 is a base

Explanation:

ascorbic acid is lemon

lemon contain ascorbic acid....

it is organic acid.....

Answer:

Because the amount of liquid water decreases and the amount of dissolved salt remains constant, the concentration of salt in the liquid water around the iceberg will increase.

Explanation:

Answer:

Because the amount of liquid water decreases and the amount of dissolved salt remains constant, the concentration of salt in the liquid water around the iceberg will increase.

Explanation:

PLATO exact answer

Answer:

We don't know what solvent X and solvent Y are, but from the chart, we can see that in solvent X, hydrochloric acid can conduct electricity (bulb lights up), and react with calcium carbonate.

So, we can say the electrical conductivity when HCl is dissolved in solvent X is high, and when HCl is dissolved in solvent Y, the electrical conductivity is low (because light bulb doesn't light up).

Additionally, in solvent X, HCl ionizes, this shows the property of acids: reacts with carbonates to give CO2 (because CO2 reacts with lime water to make it cloudy).

In solvent Y, HCl does not ionize, so there is no reaction between acid and calcium carbonate.

Answer:

3

Explanation:

6.07 has 3 digits and all are significant

Answer: I just took the test, the answer is A.

Explanation:

Answer:

it's a chemical Element

Explanation:

symbol He

atomic number 2.

Answer:

Molarity = 2.0833 M (Approx)

Explanation:

Given:

Number of moles (n) = 0.25

Volume of solution = 120 ml = 0.12 L

Find:

Molarity

Computation:

Molarity = Number of moles (n) / Volume of solution.

Molarity = 0.25 / 0.12

Molarity = 2.0833 M (Approx)

Answer:

100mL of chloromethane

Explanation:

Based on the equation:

Cl₂(g) + CH₄(g) → HCl(g) + CH₃Cl(g)

1 mole of chlorine reacts per mole of methane to produce 1 mole of HCl and 1 mole of chloromethane

Avogadro's law says that equal volumes of all gases, at the same temperature and pressure, have the same number of molecules. Using Avogadro's law we can say of the equation that:

1 mL of chlorine reacts per mL of methane to produce 1 mL of HCl and 1 mL of chloromethane

Because the system stays under constant pressure and temperature.

As 100mL of Cl₂ reacts with excess of CH₄ and 1mL of Cl₂ produce 1mL of CH₃Cl there are produced:

Answer:

ingredient. U.s unit. SI unit. SI unit(540)

flour. 2cups. ²/6. 180cups = 1.8×10²

milk. 2cups. ²/6. 180cups. =1.8×10²

eggs. 2. ²/6. 180eggs. =1.8×10²

melted butter. ⅓cup ¹/18. 30cups. =3×10¹

sugar. 1spoon. ¹/6. 90spoons. =9×10¹

baking powder 2spoons ²/6. 180spoons. =1.8×10²

salt. ½spoon. ¹/12. 45spoons. =4.5×10¹

Explanation:

1) to get the SI unit divide the U.S unit by 6

example:eggs = 2÷6. =²/6

2) to get the SI unit for 540 people ,multiply the SI unit by 540.

example:eggs ²/6×540. = 180

3)convert the answers to scientific notation

example:eggs =180. =1.8×10²

Answer:

The correct answer is - the second law of thermodynamics.

Explanation:

The second law of thermodynamics says that the in all heat energy exchange or transfer, and if there is no gain or lose of energy in a system, the potential energy of the particular state in that system will less than that of initial state of the system in any case.

It also suggests that the processes deals with the conversion of the heat energy are irreversible and the energy can be transfer from lower temperature system to higher temperate system without adding energy.

Thus, The fact that a heat pump requires energy to move heat from a colder object to a hotter object is a real life example of the second law of thermodynamics.

Answer:

1) 0.1077 moles

2) 137043.2 moles

3) 180.186 grams

4) 6.53×10²² molecules or formula units

5) 1.505×10²³ ions

6) 90.626 grams

7) 0.555 moles

Explanation:

1) The number of moles, n = Mass of the substance/(Molar mass of the substance)

The molar weight of PO₄⁻³ is 94.971 g/mol

The number of moles in 10.23 g of PO₄⁻³ is n =10.23/94.971 = 0.1077 moles

The number of moles in 10.23 g of PO₄⁻³ = 0.1077 moles

2) The number of molecules of Na₂CO₃ in one mole of Na₂CO₃ is given by the Avogadro's number, [tex]N_A[/tex] = 6.02 × 10²³ molecules

Therefore, the number of moles in 8.25 × 10²⁸ molecules of Na₂CO₃ is found by determining how many Avogadro's number of molecules are in 8.25 × 10²⁸ molecules of Na₂CO₃ as follows;

The number of moles in 8.25 × 10²⁸ molecules of Na₂CO₃ = (8.25 × 10²⁸)/(6.02 × 10²³) = 137043.2 moles

The number of moles in 8.25 × 10²⁸ molecules of Na₂CO₃ = 137043.2 moles

3) The molar mass of CH₂O = 30.031 g/mol

Therefore, the mass of 6 of CH₂O = 6 moles × 30.031 g/mol = 180.186 grams

The mass of 6 of CH₂O = 180.186 grams

4) The molar mass of NaCl = 58.44 g/mol

The number of moles of NaCl in 6.34 g of NaCl 6.34/58.44 = 0.1085 moles

1 formula unit of NaCl = 1 molecule of NaCl

The number of molecules in one mole of  a substance =  [tex]N_A[/tex] = 6.02 × 10²³

Therefore, the number of molecules in  0.1085 moles of NaCl = 6.02 × 10^(23) × 0.1085 = 6.53×10²² molecules or formula units

5) The number of ions per mole of any substance is give by Avogadro's number, [tex]N_A[/tex] = 6.02 × 10²³ ions,

The number of ions in 0.25 moles of Cu⁺² = 0.25×6.02 × 10²³ ions = 1.505×10²³ ions

The number of ions in 0.25 moles of Cu⁺² =  1.505×10²³ ions

6) The molar mass of CH₄ = 16.04 g/mol

The number of moles, n, in 3.4×10²⁴ = 3.4×10^(24)/(6.02×10^(23)) = 5.65 moles 5.65*16.04

The mass of 5.65 moles of CH₄ = 5.65 moles × 16.04 g/mol = 90.626 grams

The mass of 3.4×10²⁴ molecules of CH₄ = 90.626 grams

7) The density of water = 1 g/mL

The volume of the water 10 mL

The mass of the water = Volume × Density = 10 mL × 1 g/mL= 10 grams

The molar mass of water = 18.015 g/mol

The number of moles of water in 10 g  of water = mass/(Molar mass) = 10/18.015 = 0.555 moles.

Answer:

B. distance light travels in a year

got it on edge :)

The statement which accurately and best describes a light-year is the total distance which light travels in a complete year

Velocity of light can simply be defined as that fundamental constant that represents the speed of electromagnetic radiation in a vacuum.

The velocity of light = 2.9979 × 10^10cm/s

So therefore, the statement which accurately and best describes a light-year is the distance which light travels in a complete year

Learn more about light-year:

https://brainly.com/question/1224192

#SPJ2

Answer:

Difference in temperature.

Explanation:

Conduction is the movement of heat energy through a substance or from one substance to another by direct contact of atoms and molecules. Heat moves directly from one molecule to another. The heat energy speeds up the movement of the atoms and they collide with other molecules setting them into faster motion.

Answer:

Weak acid

Explanation:

A titration curve is a graphical description of the change in pH of the solution in the conical flask as the reagent is added from the burette. A titration curve can be plotted for the different kinds of acid and base titrations. The volume of the titrant is always plotted as the independent variable and the pH of the solution as the dependent variable. The equivalence point is read off from the titration curve. A titration curve is very important because it shows the pH at various points during the titration.

A weak acid/strong base titration leads to an equivalence point above 7. From the question, we were told that the pH at equivalence point lies around 8. Hence the unknown substance must be a weak acid.

Answer:

d. [HI] > [H2]

Explanation:

The explanation at equilibrium is shown below:-

Data provided           [tex]H_2(g) + I(g) \rightleftharpoons 2HI_(g)[/tex]

Initial concentration    -           -           [tex]\frac{2.80}{10}[/tex] = 0.280 M

At equilibrium             x          x       0.280 - 2x

[tex]K_c = \frac{(HI)^2}{(H_2)(I_2)} = 62.9[/tex]

[tex]= \frac{(0.280 - 2x)^2}{x^2} = 62.9\\\\4x^2 - 1.12x + 0.0784 = 62.9x^2[/tex]

After solve the above equation we will get

x = 0.0282 M

Therefore at equilibrium

[tex][H_2] = [I_2] = x = 0.0282M\\\\[/tex]

[tex][HI] = 0.280 - 2x = 0.2236 M[/tex]

Hence, the correct option is d.