Explain, in terms of molecular polarity, why oxygen gas has low solubility in water. (MUST INCLUDE BOTH OXYGEN AND WATER IN ANSWER.)

The maximum mass of water that can be produced in a reaction between 1 mol of glucose and 1 mol of oxygen is 18.015 g

Let's find out step-by-step:

The balanced equation for the reaction between glucose (C₆H₁₂O₆) and oxygen (O₂) to produce carbon dioxide (CO₂) and water (H₂O) is:

C₆H₁₂O₆ + 6O₂ → 6CO₂ + 6H₂O

We first need to identify the limiting reagent to calculate the maximum mass of water produced in a reaction between 1 mol of each reactant. Since there is 1 mol of glucose and 1 mol of oxygen, we can calculate how many moles of oxygen are required for 1 mol of glucose:

1 mol C₆H₁₂O₆ × (6 mol O₂ / 1 mol C₆H₁₂O₆) = 6 mol O₂

Since we only have 1 mol of oxygen available, oxygen is the limiting reagent in this reaction. Now, we can calculate the moles of water produced based on the stoichiometry of the balanced equation:

1 mol O₂ × (6 mol H₂O / 6 mol O₂) = 1 mol H₂O

Finally, we can calculate the maximum mass of water produced by multiplying the moles of water by its molar mass (18.015 g/mol):

1 mol H₂O × 18.015 g/mol = 18.015 g

So, the maximum mass of water produced in a reaction between 1 mol of glucose and 1 mol of oxygen is 18.015 g.

Learn more about limiting agents: What is limiting reagent? https://brainly.com/question/26905271

#SPJ11

Answer: B copper

Explanation:

all the rest are compounds

When the humidity reaches 100%, it can lead to the moisture will condense into precipitation. Option D is correct.

When the humidity level reaches 100%, it means that the air is holding as much moisture as it can, and the air is saturated. As a result, any additional moisture that enters the air will cause condensation, which could lead to precipitation such as rain, snow, or fog.

High humidity can also make the air feel warmer than it actually is because it hinders the body's ability to cool down through sweating. Therefore, even if the air temperature does not increase, high humidity can make it feel more uncomfortable.

As for air pressure, humidity and air pressure are not directly related. However, changes in humidity can cause changes in air pressure. When water vapor condenses, it releases heat, which can cause air to rise and create low-pressure zones.

On the other hand, when water evaporates, it absorbs heat, which can cause air to sink and create high-pressure zones. Therefore, if there is enough moisture in the air to cause precipitation, it could lead to changes in air pressure.

Hence, D. The moisture will condense into precipitation is the correct option.

To know more about humidity here

https://brainly.com/question/22069910

#SPJ4

--The given question is incomplete, the complete question is

"A weather forecast shows that the humidity will increase to 100% in the next couple of days. How might this affect the weather? A) The air pressure will decrease. B) The air temperature will increase. C) The moisture will cause more water to evaporate. D) The moisture will condense into precipitation."--

Explanation:

The balanced equation for the reaction is:

N2 + 3 H2 → 2 NH3

From the equation, we can see that 3 moles of H2 are needed to produce 2 moles of NH3.

Therefore, if 1.14 moles of H2 reacts completely, we can calculate the moles of NH3 produced as follows:

1.14 moles H2 × (2 moles NH3 / 3 moles H2) = 0.76 moles NH3

Therefore, 0.76 moles of NH3 can be produced if 1.14 moles of H2 reacts completely with nitrogen.

The density of H2O2 gas at 15 °C and 160. 20 kPa is given by formula PV=nRT is 236.40 g/L.

Density is defined as the mass per unit volume of a material under certain temperature and pressure conditions. The gas's density is equal to its mass divided by its volume. If the density of the gas is known, the molar mass of the material may be calculated. Temperature and pressure affect density.

we have,

Temperature = 15 = 15 + 273 = 288 K

And pressure = 160.2 KPa.

PV = nRT

PV = m/mwt x RT

pxmwt/RT = m/V

we know m/v = density

density = 160.20 x 34 / 0.08 x 288

d = 236.40 g/L

Therefore, density of H2O2 gas is 236.40 g/L.

Learn more about Density:

https://brainly.com/question/20384033

#SPJ4

Answer:

Explanation:

What is Lewis dot diagram?

Lewis dot diagram also known as electron -dot diagram represents the number of valence electron of atoms within a molecule.

Gilbert Lewis is the creator of the Lewis dot structure.

Lewis proposed a model for the role of electrons, particularly valence electrons, in 1916. This included the creation of electron dot diagrams or Lewis structures.

Electronic configuration of oxygen is [tex]\rm \underline{ 1s^2 \: 2s^2 \: 2p^4}[/tex]

Since oxygen has six valence electrons so, six electrons are drawn around oxygen atom.

In the given question there are also 6 electrons around the element X.

Therefore, The required answer will be Oxygen.

Answer:

Explanation:

The molar mass of copper (II) nitrate is 187.5 g/mol.

Following things will not cause segregation to occur - By adding water slowly and evenly, controlling the slump of the concrete mixture, and limiting the travel distance from the mixing plant to the job site.

Freshly mixed concrete is not a liquid but a slurry, a semistable mixture of solids suspended in liquid. Care must be taken to prevent the material from segregating, creating nonuniform and generally unsatisfactory properties.

Adding water slowly and evenly ensures that the water does not seep away to one end of the concrete, resulting in the concrete drying in patches. A high water to cement ratio increases the slump of the concrete mixture, making it flow freely.

This makes it easier for the water to spread out evenly throughout the mix, eliminating the risk of segregation. Limiting the travel distance from the mixing plant to the job site reduces the time the concrete is exposed to wind, rain, and other external factors which can cause the water to settle unevenly, resulting in segregation.

Know more about segregation here:

https://brainly.com/question/19904337

#SPJ11

Answer:

n (moles) = m (mass) / M (molar mass)

Explanation:

divide the mass by the molar mass, and you have your answer

Chemical fοrmula οf Irοn(II) οxide is FeO and Irοn(III) οxide is Fe2O3.(FeO) is a black οr brοwn pοwder that is used as a catalyst, reducing agent, and pigment.

A cοmpοund is a substance made οf twο οr mοre elements that are chemically bοnded tοgether. Cοmpοunds are fοrmed when atοms οf different elements share electrοns, fοrming chemical bοnds.

It is alsο used in the manufacturing οf ferrοus allοys, steel, and glass. Irοn(III) οxide (Fe₂O₃) is alsο a black οr red pοwder, but with a different chemical cοmpοsitiοn. It is used as a pigment and abrasive in paints and cοatings, a catalyst in the synthesis οf ammοnia, and a cοlοring agent in ceramics and plastics.

These twο fοrms οf irοn οxide are nοt the same cοmpοund, as they have different chemical fοrmulas and uses.

Learn more about Compound from the given link:

brainly.com/question/26487468

#SPJ1

AgNO3(aq) + Na2CO3(aq) → Ag2CO3(s) + 2NaNO3(aq)

Response and justification The chemical equation below is a representation of the reaction between Na2CO3 N a 2 C O3 and AgNO3 A g N O3. When the aqueous solutions of Na2CO3, Na2CO3, and AgNO3, AgNO3, are combined, precipitation will occur.

Both Na2CO3 and AgNO3 are strong electrolytes and will totally dissociate. The net ionic equation will divide them up as a result. The twofold displacement reaction is Na2CO3 + AgNO3. In the reaction, the positions of the Na in Na2CO3 and the Ag in AgNO3 change.

To know more about Ag2CO3(s) visit:-

https://brainly.com/question/20898341

#SPJ1

Both direct and indirect uses of water are possible.While bathing, drinking, & cooking are examples of direct uses of water, indirect uses include the production of steel for automobiles and the processing of wood to manufacture paper.

It's critical to drink enough water each day for your health.By staying hydrated, you can avoid being dehydrated, a condition that really can impair your memory, alter your mood, cause your system to overheat, & result in constipation & kidney stones.

Water is a crucial element of the majority all biological processes because it acts as a solvent.Using water as a solvent, food is absorbed by our bodies as solutions.Furthermore, perspiration and urine are used to eliminate several wastes as solutions.

To know more about uses of water visit:

https://brainly.com/question/2976496

#SPJ1

The mass of a 12.56 L sample of carbon dioxide at STP is approximately 21.94 grams.

To determine the mass of a 12.56 L sample of carbon dioxide, we need to know the pressure and temperature of the gas. This is because the density of a gas, and therefore its mass, depends on these factors.

Assuming standard temperature and pressure (STP), which is 0°C (273.15 K) and 1 atm (101.3 kPa), we can use the ideal gas law to calculate the mass of the carbon dioxide:

PV = nRT

where:

P = pressure = 1 atm

V = volume = 12.56 L

n = number of moles of gas

R = gas constant = 0.08206 L·atm/mol·K

T = temperature = 273.15 K

Solving for n, we get:

n = PV/RT = (1 atm)(12.56 L)/(0.08206 L·atm/mol·K)(273.15 K) = 0.499 mol

The molar mass of carbon dioxide (CO2) is 44.01 g/mol, so the mass of 0.499 mol of CO2 is:

mass = n × molar mass = 0.499 mol × 44.01 g/mol

= 21.94 g

To know more about ideal gas law here

https://brainly.com/question/4147359

#SPJ4

Comparing the density values for the liquid in Part whose actual density is 1.50 g/mL:

Precision and accuracy are two important concepts in the field of measurement.

Precision refers to how consistent or reproducible a set of measurements is under the same conditions. In other words, precision describes the degree to which repeated measurements of the same quantity give similar results.

Accuracy, on the other hand, refers to how close a measured value is to the true or accepted value of the quantity being measured. In other words, accuracy describes the degree to which a measurement is free from systematic errors or biases.

Learn more about precision and accuracy at: https://brainly.com/question/1695072

#SPJ1

Complete question:

The density values for the liquid in Part I are found in the table in the attached picture.

The statement that is true of the solubility of a gas in a liquid is that "the solubility of the gas in the liquid usually increases as pressure increases".

The solubility of a gas in a liquid is the amount of gas that dissolves in a given volume of a liquid at a particular temperature and pressure. The solubility of a gas in a liquid is affected by changes in temperature, pressure, and the nature of the solvent and the solute. The solubility of a gas in a liquid is directly proportional to the partial pressure of the gas over the liquid.

Therefore, if the partial pressure of the gas above the liquid is increased, the solubility of the gas in the liquid also increases. If the partial pressure of the gas above the liquid is decreased, the solubility of the gas in the liquid also decreases. This phenomenon is known as Henry's law.

According to Henry's law, the solubility of a gas in a liquid is directly proportional to the pressure of the system. Therefore, as the pressure of the system increases, the solubility of the gas in the liquid decreases. Conversely, as the pressure of the system decreases, the solubility of the gas in the liquid increases.

To summarize, the solubility of a gas in a liquid usually increases as pressure increases. This is because the solubility of a gas in a liquid is directly proportional to the partial pressure of the gas over the liquid.

To know more about the solubility of gas, refer here:

https://brainly.com/question/3479494#

#SPJ11

Explanation:

Constants do not vary ..... they stay 'constant'

so  

A .....no ...different temps

B.....constant

C ......no  the # chirps vary

D.....constant

The molar mass of Gatorade cannot be determined just by knowing the chemical formula of glucose.

Gatorade is a complex mixture of water, sugars, electrolytes, and other ingredients.

Thus, the molar mass of Gatorade cannot be determined solely from the chemical formula for glucose.

The molar mass of Gatorade would need to be determined experimentally by analyzing the composition of the mixture in the laboratory.

More on molar mass can be found here: https://brainly.com/question/22997914

#SPJ1

The subscript of the oxygen molecule in the equation 2Mg + O2 → 2MgO is 2.

This means that two oxygen molecules (O2) are involved in the reaction, and they combine with two magnesium atoms (2Mg) to form two magnesium oxide molecules (2MgO). The subscript "2" in front of MgO indicates that two MgO molecules are formed as a result of the reaction. The equation 2Mg + O2 → 2MgO represents a combustion reaction in which magnesium (Mg) reacts with oxygen (O2) to produce magnesium oxide (MgO). This is an example of an exothermic reaction, which releases energy in the form of heat and light.

learn more about exothermic reaction here:

https://brainly.com/question/579952

#SPJ4

A kind of clinical experiment where neither the research team nor the subjects are aware of the treatment they are getting until the trial is over. As a result, the study's findings are less likely to be skewed.

Single-blind research typically involves keeping the research subject's treatment assignment a secret. In a double-blind study, the participant in the research, the investigator, the study coordinator or nurse, the study sponsor, and occasionally the data analyst are kept in the dark regarding the treatment allocation.

As doctors assess the results of their patients, bias is avoided by double blind investigations. As a result, clinical trial outcomes have increased reliability. Your doctor may "unblind" you if you experience health issues during a trial, such as a potential drug reaction, to reveal the treatment you are receiving.

To know more about experiment visit-

https://brainly.com/question/30712062

#SPJ1

The correct name for the compound is 2-methylprop-2-ene, or 2-methylpropene. This alkene has a (E) configuration, meaning the two groups with the highest priority (the methyl group and the hydrogen atom) are on opposite sides of the double bond. The 1993 IUPAC naming convention requires the use of hyphens (-) rather than endashes (-) when specifying the location of the substituents on an alkene.

Dehydration of alcohols is an elimination reaction where a proton from the alcohol is added and a leaving group is removed. This type of reaction is reversible and the reverse reaction is hydration of an alkene. Tertiary alcohols typically undergo dehydration the fastest, followed by secondary and primary alcohols.

Overall, dehydration of alcohols is an elimination reaction which is reversible and the reverse reaction is hydration of an alkene. Tertiary alcohols typically undergo dehydration the fastest, followed by secondary and primary alcohols. The alkene product is more stable than the original alcohol due to the presence of the double bond and its ability to create a resonance structure.

Know more about  Tertiary alcohols here:

https://brainly.com/question/30763057

#SPJ11

There are 2 oxygen atoms in the compound Sr(OH)₂, and 9 sulfur atoms are in the compound Cr₂(SO₄)₃.

In the compound Sr(OH)₂, there is one strontium ion (Sr₂⁺) and two hydroxide ions (OH⁻). The formula for hydroxide ion is OH⁻, which means it contains one oxygen atom and one hydrogen atom. Therefore, there are a total of 2 oxygen atoms in the two hydroxide ions present in the compound.

In the compound Cr₂(SO₄)₃, there are two chromium ions (Cr₃⁺) and three sulfate ions (SO₄²⁻). The formula for sulfate ion is SO₄²⁻, which means it contains one sulfur atom and four oxygen atoms. Therefore, there are a total of 3 x 1 = 3 sulfur atoms present in each sulfate ion. Since there are three sulfate ions present in the compound, the total number of sulfur atoms is 3 x 3 = 9.

To know more about oxygen atoms here

https://brainly.com/question/29695801

#SPJ4

--The given question is incomplete, the complete question is

"How many oxygen atoms are in the compound Sr(OH)₂ and How many sulfur atoms are in the compound - Cr₂(SO₄)₃"--

Substitution reactions can require a catalyst to be feasible. (a). A high temperature should be maintained in order to maximize the percent yield of the substitution reaction.; (b). A high pressure should be used in order to maximize the percent yield of the substitution reaction. ; The HCl gas should not be allowed to escape into another container

The reaction represented by the following equation is heated to maximize the percent yield.  

C2H6(8) + Cl2(g) + energy c HCl(l) + HCI()

a. To maximise the percent yield of the substitution reaction, a high temperature should be maintained. This is because increasing the temperature increases the kinetic energy of the molecules, allowing them to move faster and collide more frequently. This leads to an increased rate of reaction and a higher percent yield.

b. To maximise the percent yield of the substitution reaction, use a high pressure. This is because increasing the pressure increases the concentration of the reactants, which leads to more frequent collisions between the molecules and an increased rate of reaction.

c. Allowing the HCl gas to escape into another container is not permitted. This is because the HCl gas is a product of the reaction and removing it from the reaction vessel will decrease the yield of the reaction. Instead, the HCl gas should be kept in the same container as the reactants in order to maximize the percent yield of the substitution reaction.

For more question on Substitution reactions click on

https://brainly.com/question/10143438

#SPJ11

The pH does not decrease drastically because the HCl reacts with the  nitrite ion present in the buffer solution is: C) nitrite ion.

In this case, nitrous acid (HNO2) and sodium nitrite (NaNO2) are used to prepare the buffer solution. The nitrous acid is a weak acid, and the nitrite ion (NO2-) is its conjugate base. The presence of both the weak acid and its conjugate base makes this solution a buffer solution.

When a small amount of HCl is added to the buffer solution, it reacts with the nitrite ion present in the solution according to the following equation:

HCl + NO2- -> HNO2 + Cl-

The HCl donates a proton to the nitrite ion, forming nitrous acid and chloride ion. This reaction consumes some of the added HCl, which prevents the pH from decreasing drastically.

Therefore, the correct answer is option C) nitrite ion.

Learn more about nitrite ion here:https://brainly.com/question/12101971

#SPJ1

The allegations are unfounded and perhaps pseudoscientific. Because to the fact that Jewels only come into contact with the skin's surface, they are not extremely beneficial. The ions cannot enter the human body.

In other words, product claims might highlight practical advantages, point out emotional connections, foster trust, or even draw parallels with rival products on the market. These are a few illustrations of various product claims: manufactured using fresh produce and fruits. 100% natural.

We discovered that human skin is permeable to ions such as magnesium, calcium, sulphate, and nitrate in vitro at amounts seen in the atmospheric fallout in two separate polluted regions of Poland.

To know more about ions visit-

https://brainly.com/question/3110170

#SPJ1

Answer:

Nickel (I) Phosphate

Explanation:

PO4 is a -3 ion it will need 3 Ni(I) ion, which is -1 ion. Therefore it is Ni3PO4.

HCl(aq) would be expected to see written as separated ions in an ionic equation.

When HCl is dissolved in water, it ionizes completely to form H+ and Cl- ions, which are free to move around in solution. Therefore, in an ionic equation, HCl(aq) would be written as H+(aq) + Cl-(aq).

In contrast, H2(g), H2O(l), and H2S(g) are covalent compounds that do not ionize in water, so they would not be written as separated ions in an ionic equation.

34.21 g mass (g) of precipitate will be produced if the reaction runs to completion.

The chemical equation for the reaction between sodium chloride and silver nitrate is

[tex]NaCl + AgNO_3[/tex]→[tex]AgCl + NaNO_3[/tex]

The given amount of sodium chloride is 14.0 g

The volume of deionized water added is 200 ml

The volume of silver nitrate is 100 ml

The molarity of silver nitrate is 2.0 M

Let us first calculate the number of moles of silver nitrate that is used:2.0 M = 2.0 mol/L

Number of moles of silver nitrate used = 2.0 mol/L x 100/1000 L= 0.20 mol

Now, we can use mole-to-mole ratios to find the amount of precipitate (AgCl) that will be produced from the given amount of NaCl.

Number of moles of NaCl = 14.0 g / 58.44 g/mol = 0.239 mol

From the balanced chemical equation, we see that 1 mole of NaCl reacts with 1 mole of [tex]AgNO_3[/tex] to produce 1 mole of AgCl

Number of moles of AgCl produced = 0.239 mol

Therefore, the mass of AgCl produced is:

Mass of AgCl = 0.239 mol x 143.32 g/mol = 34.21 g

Hence, the mass of precipitate produced is 34.21 g.

Therefore, the mass of precipitate that will be produced when 14.0 g of sodium chloride is reacted with 100.0 mL of 2.0 M silver nitrate in 200 mL of deionized water is 34.21g.

To know more about Precipitate please visit :

https://brainly.com/question/30344509

#SPJ11

Therefore, the number of moles of barium sulfate formed from 0.0831 mol of magnesium sulfate is equal to 0.0831 mol.

By possibly inhibiting calcium-mediated contraction, reducing acetylcholine release from neuromuscular junctions, and decreasing histamine-induced airway spasm, magnesium sulphate (MgSO4) can calm smooth muscles.

The balanced chemical equation for the reaction between magnesium sulfate and barium chloride is:

MgSO4 + BaCl2 → BaSO4 + MgCl2

According to the equation, one mole of magnesium sulfate (MgSO4) reacts with one mole of barium chloride (BaCl2) to produce one mole of barium sulfate (BaSO4).

So, 0.0831 mol of magnesium sulfate will produce 0.0831 mol of barium sulfate.

This is because the stoichiometric ratio of magnesium sulfate to barium sulfate is 1:1, which means that for every mole of magnesium sulfate that reacts, one mole of barium sulfate is produced.

To know more about moles visit:-

brainly.com/question/26416088

#SPJ1

Answer:

4 Fe + 3 O2 → 2 Fe2O3

Explanation:

Left side: 4 Fe, 3 o2=3x2=6 O ==> 4 Fe, 6 O

Right side: 2xFe2= 4 Fe, 2x3 o2 = 6 O ==> 4 Fe, 6 O

To calculate the molar mass of Pb(NO3)2, you need to add up the atomic masses of all the atoms in the compound, taking into account the number of each atom in the molecule.

The molecular formula of Pb(NO3)2 indicates that there is one lead atom (Pb), two nitrogen atoms (N), and six oxygen atoms (O) in the compound.

The atomic mass of lead (Pb) is 207.2 g/mol. The atomic mass of nitrogen (N) is 14.0 g/mol, and the atomic mass of oxygen (O) is 16.0 g/mol.

Therefore, the molar mass of Pb(NO3)2 can be calculated as:

Molar mass of Pb(NO3)2 = (1 x 207.2 g/mol) + (2 x 14.0 g/mol) + (6 x 16.0 g/mol)

= 207.2 g/mol + 28.0 g/mol + 96.0 g/mol

= 331.2 g/mol

Therefore, the molar mass of Pb(NO3)2 is 331.2 g/mol.