Answer:
C, Si, Al
Explanation:
We use periodic trends to help us find the atomic radii. The trend for atomic radii on the Periodic Table of Elements is down and to the left. So whichever elements are furthest to the left and farthest down have the largest atomic radii.
What mass of nickel (Ni) is in a 2.4 Kg sample of propanol if the concentration is 20 ppb ? (atomic mass of Ni = 58.69)
Answer:
The mass of nickel is 48μg
Explanation:
Parts per billion is a way to describe small concentrations and is defined as the ratio between μg of solute and kg of solvent.
If a solution of nickel in propanol is 20ppb, contains 20μg of nickel in 1 kg of propanol.
Thus, a sample of 2.4kg of propanol will contain:
2.4kg × (20μg nickel / 1kg) = 48μg nickel
The mass of nickel is 48μgQuestion 4 of 10
Which two gases are trace gases in the atmosphere?
O A. Nitrogen
I B. Neon
O C. Oxygen
D. Methane
Answer:
Neon and Methane
Explanation:
Nitrogen and Oxygen made up way over half of the atmosphere so it's without a doubt, not those two. Precisely, Nitrogen makes up 78% of the atmosphere while oxygen makes up 21%
Answer: neon and methane
Calculate the payback time if she insulates the loft with 300 mm insulation when: area of loft space = 100m^2 cost of roll of 100 mm thick loft insulation that covers 8.3m^2 = £20 cost of putting the insulation into the loft = £120 savings per year = £80 per 100 mm Payback Time = installation cost divided by annual savings
Answer: Payback time = 0.0075
Explanation: Since payback time is calculated as:
payback time = [tex]\frac{installation cost}{annual savings}[/tex]
First determine the installation cost:
100 mm thick insulation covers 8.3 m². Then 300 mm covers 24.9 m².
To cover 8.3m² costs £20. Then, the cost to cover 24.9 m² is:
cost = [tex]\frac{20*24.9}{8.3}[/tex]
cost = £60
The cost of putting the insulation is £120, so the total cost is:
total cost = £60 + £120
total cost = £180
Savings per year per 100 mm thick is £80. For 300 mm, the value of annual savings is:
savings = [tex]\frac{300*80}{100}[/tex]
savings = 240
payback time = [tex]\frac{installation cost}{annual savings}[/tex]
payback time = [tex]\frac{180}{240}[/tex]
payback time = 0.75
What can you infer about the results of numerical models in 1966 for polar caps
made of water ice?
Answer:
Those people could sustain on Mars, by living closer to the poles
Explanation:
As it is given that caps involve the water ice instead of the carbon dioxide
And, current observations of spectrum analyzed that the polar caps are totally different from one other i.e northern one involves more water ice while on the other hand, the southern one involves most of the carbon dioxide
Moreover, the astronomers unable to see to spectrum portions as the atmosphere absorbs the wavelength
So we conclude that the people could survive on mars if they live near to poles
sea water boiling below 100 degrees celsius true or false
Answer:
Explanation:
its true
hope this helps
plz mark as brainliest!!!!!
Answer:
True
Explanation:
1) In 1.31 g of a chloride of titanium, there is 0.528 g of titanium. What is the empirical formula of this titanium chloride?
Answer:
TiCl2
Explanation:
Mass of the chloride of titanium= 1.31 g
Mass of titanium= 0.528 g
Therefore mass of chlorine = 1.31-0.528 = 0.782 g
To determine the empirical formulae of the titanium chloride, divide the mass of each element by its relative atomic mass and divide through by the lowest ratio.
Ti- 0.528/48 = 0.011, Cl- 0.782/35.5 = 0.022
Ti- 0.011/0.011 , Cl- 0.022/0.011
Ti- 1, Cl-2
Hence the required empirical formula is TiCl2
mass is 89.6 grams (g), and its volume is 10 cubic centimeters (cm3). What’s the density of the sample?
Explanation:
density = mass/volume
density = 89.6/10
density = 8.96g/cm³
a heating fan is supplied with 150 j of electricity which is nonverts to 113 j of thermal energy and 37 j of sound energy
How efficient is the heating fan?
Answer:
Heating Fan is 75.33% efficient.
Explanation:
As it is mentioned that the given fan is a HEATING FAN, it means the it is used for provided heat (thermal energy) to the surrounding. Hence, its efficiency depends upon how much heat/thermal energy is provides.
We can state that.
Total Energy provided = 150 J
Useful Energy = 113 J
Wasted Energy = 37 J
The efficiency of the heating fan can be given by following formula:
Efficiency = ( Useful Energy / Total Energy ) × 100
Efficiency = ( 113 J / 150 J) × 100
Efficiency = (0.7533)× 100
Efficiency = 75.33%
Which consists of only one type of atom?
Answer:
A chemical element
Explanation:
A chemical element consists of only one type of atom.
A glass cup of orange juice is found to have pOH of 11.40. Calculate the concentration of the hydrogen ions in the juice.
Answer: The concentration of hydrogen ion is 2.5 x 10∧-3.
Explanation:
It is well known that; pH + pOH = 14
∴ pH + 11.40 = 14
pH = 14 -11.40 = 2.60
Remember that,
pH = - Log [ H+ ]
2.60 = - log [H+]
To get the hydrogen ion concentration, we take the anti-log of 2.60.
[H+] = Antilog 2.60 = 2.5 x 10∧-3.
sodium chloride is called an electrovalent compound where as carbon dioxide is called covalent compound why
Electrovalent compounds are those that are created when one or more electrons are transferred from one atom to another inside the compound. NaCl is an electrovalent substance because it shares an electron with other compounds to produce them.
What are compounds ?A material created by chemically joining two or more distinct components. Examples of compounds are table salt (NaCl), which is generated from the elements sodium and chloride, and water (H2O), which is created from the components hydrogen and oxygen.
One carbon atom and two oxygen atoms combine to form carbon dioxide. One carbon dioxide molecule contains four covalent connections. Because neither carbon nor oxygen are metals, we can infer that carbon dioxide is a covalent molecule.
Pure substances known as compounds are created chemically when two or more elements are combined in a specific mass proportion. Chlorine and sodium combine to form sodium chloride (common salt).
Thus, sodium chloride is called an electrovalent compound whereas carbon dioxide is called covalent compound.
To learn more about compound, follow the link;
https://brainly.com/question/14117795
#SPJ2
Why does a perfume bottle burst when placed inside the flame?
Answer:
Explanation:
It is because they contain ethyl alcohol and they are inflammable. The perfume contains alcoholic substances like the ethyl alcohol or the ethanol. After reaching the flash point,the combustion of ethanol takes place inside the bottle and the internal combustion created pressure causes explosion.
Hope this helps
plz mark as brainliest!!!!!!!
Answer:
because they contain ethyl alcohol and they are inflammable.
Jack tries to place magnets on his refrigerator at home, but they won’t stick. What could be the reason?
Answer:
The body of the refrigerator isn’t made of magnetic material.
Explanation:
Same reason why a magnet doesn't stick to a paper or a plastic is the reason behind why Jack's refrigerator is acting out because may be it isn't made of magnetic materials like iron, steel etc, but rather made up of non magnetic things like porcelain, wood etc.
HELP! 10 points rewarded, plus, best answer gets BAINLIEST!!
Answer:
4.08 grams
Explanation:
Essentially, we're looking for the mass of HCl that "matches" 3.26 grams of magnesium hydroxide.
First, convert 3.26 grams of [tex]Mg(OH)_2[/tex] into moles by dividing by the molar mass. The molar mass of [tex]Mg(OH)_2[/tex] is 24.3 + 16 * 2 + 1 * 2 = 58.3 g/mol. So, 3.26 grams is equal to:
3.26 g ÷ 58.3 g/mol = 0.0559 mol [tex]Mg(OH)_2[/tex]
Notice that from the chemical equation, magnesium hydroxide and hydrochloric acid (HCl) have a ratio of 1 to 2. In other words, for every 0.0559 moles of [tex]Mg(OH)_2[/tex], there are 0.0559 * 2 = 0.112 moles of HCl.
Finally, convert moles of HCl to grams by multiplying 0.112 by the molar mass, which is 1 + 35.45 = 36.45 g/mol:
0.112 mol HCl * 36.45 g/mol = 4.08 g HCl
The answer is thus 4.08 grams.
~ an aesthetics lover
When sugar is added to a sugar solution, the sugar does not dissolve. Which
term describes the original sugar solution?
O A. Semisaturated
O B. Supersaturated
C. Saturated
D. Unsaturated
Answer:Supersaturated
Explanation:The answer is supersaturated because supersaturation is a solution that contains more than the maximum amount of solute that is capable of being dissolved at a given temperature. It is supersaturated because there is already a sugar solution and adding another sugar is more than the maximum amount of solute.
what is the mass of 1.5 mol of aluminum?
Answer:
40.47 g Al
Explanation:
In 1 mol of Al, there are 26.98 grams of Al, so Al is 26.98 g/mol.
Simply multiply 1.5 by 26.98 to get your answer.
Which refers to the density of the medium’s particles at the compression of a sound wave? A.amplitude B.pitch C.volume D.wavelength
Answer:
A is the answer.
Explanation:
The sound wave is a longitudinal wave which travels in the form of compression and rarefaction . The point where the particles are closer to each other is called compression and the point where the particles are far apart from each other is called rarefaction.
Answer:
Amplitude
Explanation:
Amplitude describes the displacement of the medium's particles. The higher the amplitude, the more dense it is, and the lower the amplitude, the less dense it is.
Pitch is incorrect because it describes the sound
Volume is incorrect because it describes the sound.
Wavelength is incorrect because it describes the distance between a period of a wave.
Representa la unión iónica entre los siguientes átomos: 1) Bromo y Potasio 2) Calcio y Oxígeno 3) Cloro y Magnesio 4) Sodio y Flúor 5) Aluminio y Nitrógeno Ayuda por favoor
Answer:
a. KBr
b. CaO
c. MgCl₂
d. NaF
e. NH₃
Explanation:
a. 2K + Br₂ = 2KBr
b. 2Ca + O₂ = 2CaO
c. Mg + Cl₂ = MgCl₂
d. 2Na + F₂ = 2NaF
d. N₂ + 3H₂ = 2NH₃
DUE IN 30 MINUTES!!! (please keep it short if you can, if not its ok.) What is the molar mass of Pb(SO4)2? Explain how you calculated this value. (4 points)
Answer:
399
Explanation:
Pb(SO4)2 contains 1 atom of Pb, 2 atoms of S and 8 atoms of O. So, atomic mass of Pb(SO4)2 is 207 + 64 + 128 = 399 u. Therefore, molar mass of Pb(SO4)2 is 399 g/mol.HOPE THIS helps. Good Luck
Answer:
The molar mass of Pb(SO₄)₂ is 399.32.
Explanation:
To find the molar mass of Pb(SO₄)₂, you have to find the molar mass of each individual element that makes up the compound.
Let's start by figuring out how many of each element is present in the compound.
Pb (lead) - 1
S (sulfur) - 2
O (oxygen) - 8
(SO₄)₂ is a polyatomic ion. It is written in parentheses followed by a subscript of 2. This means that there are two sulfate ions in the compound. So, the number of sulfur atoms and oxygen atoms doubles. (1 × 2 = 2) and (4 × 2 = 8).
Next, look up the molar mass of each element on a periodic table and multiply it by the number of atoms present.
Pb - 207. 2 × 1 = 207. 2
S - 32.06 × 2 = 64.12
O - 16.00 × 8 = 128
Lastly, add up them all together to get the molar mass.
207. 2 + 64.12 + 128 = 399.32
The initial temperature of a bomb calorimeter is 28.50°C. When a chemist carries out a reaction in this calorimeter, its temperature decreases to 27.45°C. If the calorimeter has a mass of 1.400 kg and a specific heat of 3.52 J/(gi°C), how much heat is absorbed by the reaction?
Answer:
D. 5,170 J
Explanation:
Which of the following is the best definition of a physical change?
A. Something that can be observed or measured while changing the identity of the substance.
B. A nail rusting.
C. A change that occurs without changing the identity of the substance.
D. Ice melting into water.
Answer:
the answer is D.ice melting into water
all electromagnetic radiation: A. can travel through empty space B. travels at the same speed in a vacuum C.consists of photons D. all of the above
Answer:
A. can travel through empty space
Explanation:
it is said dat electro magnetic waves or radiation travels through the vacuum of space
Answer:
all of the above. Because, Y'know, electromagnetic radiation is like that.
Electrical potential is the amount of energy that is available to do what?
A.
attract atoms to each other
B.
move atoms from one half cell to another half cell
C.
move electrons from anode to cathode
D.
move electrons from cathode to anode
C.
move electrons from anode to cathode
Step-by-step Explanation
Electrical potential is the amount of energy that is available to move electrons from anode to cathode
Answer:
move electrons from anode to cathode
Explanation:
Plato
Which part of the electromagnetic spectrum is nearest to X-rays? microwaves infrared light gamma rays radio waves
Answer:
The correct answer to the following question will be Option A (Microwaves).
Explanation:
This tends to be a source of radiation, including some signals, infrared radiation, x-rays as well as gamma. This appears to have a diverse variety of uses, involving communications, radar, and scheduling, but best known by most individual people. Sections of society used handheld devices, including tablets, as well as WiFi.The other given choices are not related to the given circumstances. So that option A seems to be the appropriate one.
Answer:
its a
Explanation:
what is Lfusion in the equation Q=mLfusion
Answer:
[tex]L_{\text{fusion}[/tex] is latent heat of fusion.
Explanation:
Latent heat is basically termed as hidden heat. It is defined as the amount of heat required to change 1 g of a substance at the temperature of its melting point from the solid to the liquid state at constant temperature.The formula that relates heat and latent heat of fusion is given by :[tex]Q=mL_{\text{fusion}}[/tex]
Here,
m is mass of substance
[tex]L_{\text{fusion}[/tex] is latent heat of fusion.
newborn reflexes... A. are consciously controlled behaviors B. are unique to each individual newborn C. have little impact on development D. contribute to infant survival
Answer:
The correct answer to the following question will be Option B.
Explanation:
To survive, newborns don't require reflexes. Even though their perceptions were already improving performance, they don't rely on visual stimulation because it was too abstract for them so you can't even guess whose stimulus they're going comes to choosing.The reflexes between each child are special. Each one of them has its own.For instance, its action has always been designed to suck quickly.
Some other choices being made aren't linked to the circumstance. The second Scenario would have been the right choice.
The ____ cycle is not a nutrient cycle
Answer:
Water cycle
Explanation:
The water cycle, also called as the hydrologic cycle that describes the continual flow of water i.e on over and beyond the surface of the Earth.
The nutrient cycle refers to the cycle in which there is a movement and exchange of organic and inorganic matter
Therefore the water cycle is not a nutrient cycle and hence the same is to be considered
Answer:
water cycle
Explanation:
:)
Which question would most likely be studied by a physicist?
A. Were there ever any living organisms on Mars?
B. How can the forces on a space probe be controlled so it will land
on Mars?
O C. What type of substances make up the soil on Mars?
O D. Should the government spend taxpayers' money to send space
probes to Mars?
Answer:A
Explanation: Were there any living organisms is the answer because physics is the study of matter,its motion and behaviour of space and time and some other topics like energy and force.
Answer:
B
Explanation:
Forces and vectors on a probe are a physics thing
Consider an electrochemical cell based on the spontaneous reaction 2AgCl(s) + Zn(s) → 2Ag(s) + 2Cl– + Zn2+. If the zinc ion concentration is kept constant at 1 M, and the chlorine ion concentration is decreased from 1 M to 0.001 M, the cell voltage should:
Answer:
there is an increase by 0.18 V in the cell voltage.
Explanation:
The given equation of the reaction can be well written as
[tex]2AgCl_{(s)} + Zn _{(s)} \to 2Ag_{(s)} + 2 Cl^- _{(aq)}+ Zn^{2+}_{(aq)}[/tex]
By application of Nernst Equation ; we have the expression
[tex]E_{cell} = E^0- \dfrac{0,059}{n}log (\dfrac{[product]}{[reactant]})[/tex]
here in the above equation;
n = number of electrons transferred in the equation of the reaction
n = 2
Also;
[tex]E^0 = E_{cathode} - E_{anode}[/tex]
[tex]E^0 = E_{Ag^+/Ag} - E_{Zn^+/Zn}[/tex]
[tex]E^0 = +(0.80 \ V) - (-0..76 \ V)[/tex]
[tex]E^0 = (0.80 \ V +0..76 \ V)[/tex]
[tex]E^0 = 1.56 \ V[/tex]
If the zinc ion concentration is kept constant at 1 M; we have:
[tex]E_{cell} = E^0- \dfrac{0.059}{n}log (\dfrac{[product]}{[reactant]})[/tex]
[tex]E_{cell} = 1.56 - \dfrac{0.059}{2}log ({[Zn^{2+} ]}{[Cl^{2-}]})[/tex]
[tex]E_{cell} = 1.56 - \dfrac{0.059}{2}log (1)[/tex]
Since log(1) = 0
Therefore;
[tex]E_{cell} = 1.56\ V[/tex]
When the chlorine ion concentration is decreased from 1 M to 0.001 M; we have;
[tex]E_{cell} = E^0- \dfrac{0.059}{n}log (\dfrac{[product]}{[reactant]})[/tex]
[tex]E_{cell} = 1.56 - \dfrac{0.059}{2}log ({[Zn^{2+} ]}{[Cl^{2-}]})[/tex]
[tex]E_{cell} = 1.56 - \dfrac{0.059}{2}log ({[1*0.001^2}]})[/tex]
[tex]E_{cell} = 1.56 - 0.0295 \ * \ log ({[1*10^{-6}}]})[/tex]
[tex]E_{cell} = + 1.737 \ V[/tex]
The change in voltage = [tex]E_{cell} - E^0[/tex]
=( 1.737 - 1.56 )V
= 0.177 V
≅ 0.18 V
Thus; from the following observation; there is an increase by 0.18 V in the cell voltage.
The voltage of the cell increased by 0.18 V.
The equation of the reaction is; 2AgCl(s) + Zn(s) → 2Ag(s) + 2Cl– + Zn2+
We know that;
E°cell = 1.36 - (-0.76) = 2.12 V
If the cells are both at 1M concentration the Ecell = E°cell = 2.12 V
When the concentration of Cl- decreased from 1 M to 0.001 M
Ecell = E°cell - 0.0592/n log Q
Substituting values;
Ecell = 2.12 V - 0.0592/2 log (1 × (0.001)^2)
Ecell = 2.298 V
Increase in voltage = 2.298 V - 2.12 V = 0.18 V
Learn more: https://brainly.com/question/165414
A sample of gas is found to occupy a volume of 900cm^3 at 27 degree Celsius, calculate the temperature at which it will occupy a volume of 300cm^3, provided the pressure is kept constant.
Answer:
Explanation:
Here, V1=900cm3, V2=300cm3
T1=(27+273)K=300K, T2=?
Applying Charles's law,
V1T1=V2T2
∴T2=V2T1V1=300cm3×300K900cm3=100K
=100−273=−173∘C
Hope this helps
plz mark as brainliest!!!!!!