Concentration of unknown sample with an absorbance of 0.32 at 542 nm is 2.22 × 10^-5 M.
What is Beer's law ?
Beer's Law is an equation that connects a material's characteristics to light attenuation. According to the law, a chemical's concentration and a solution's absorbance are exactly related. Using a colorimeter or spectrophotometer, the relation can be used to calculate the concentration of a chemical species in a solution. The UV-visible absorption spectroscopy is where the connection is most frequently applied. Be aware that at high solution concentrations, Beer's Law is invalid . Beer's law suggest that absorbance and concentration of a sample at a particular wavelength varies linearly. Now the best fit line equation for unknown sample is given as , y = 15200x - 0.018 where y is absorbance and x is concentration of sample . At an absorbance of 0.32 , put y = 0.32 in given equation we get the concentration .
To know about the Beer's Law ,click the link given ;
https://brainly.com/question/18591932
#SPJ4
calculate the temperature (in k) at which 0.0938 mol of o2 has a pressure of 740 torr in a 1.0l container.
The temperature (in k) will be 126.509 K
Number of moles of Oxygen = 0.0938 mol
Pressure = 740 torr or 98658.6 Pa
Volume = 1.0 L or 0.001 m3
Temperature in K = ?
To find out the temperature (T) we use the ideal gas equation
PV = nRT
As we have to find the temperature so rearrange the equation for T
T = PV / nR
value of R = 8.314 J/mol.K
Put the values in the equation
V = 98658.6 * 0.001 / 0.0938 * 8.314
V = 0.000974 / 0.779853
V = 98.6596 / 0.779853
V = 126.509 K
You can also learn about the ideal gas equation from the following question:
https://brainly.com/question/3637553
#SPJ4
two unknown mineral samples, a and b, are rubbed against each other. mineral a scratches mineral b. what can you infer about the minerals?
Mineral A scratches mineral B, we can infer from here that Mineral A is more harder than Mineral B.
The minerals are the naturally occurring chemical compounds which are found in the earth's layers. Minerals have different properties.
If mineral A is rubbed against mineral B and Mineral A scratches mineral B, we can infer from here that the mineral A is harder than mineral B.
The hardness of the minerals is because of the intermolecular forces between the particles of the minerals. The mineral A might be having strong intermolecular forces in comparison with the mineral B.
This is why when rubbed against each other, the mineral A scratches the particle of the mineral B which has lower intermolecular forces between the particle of the mineral B.
To know more about Minerals, visit,
https://brainly.com/question/89259
#SPJ4
Complete question - Two unknown mineral samples, A and B, are rubbed against each other. Mineral A scratches mineral B. What can you infer about the minerals?
O Mineral A is harder than mineral B.
O Mineral B is harder than mineral A.
O Mineral A is more dense than mineral B
Mineral B is denser than mineral A.
what is the ph of a solution made by mixing 40.00 ml of 0.100 m hcl with 25.00 ml of 0.100 m koh? assume that the volumes of the solutions are additive.
The pH of the solution which was made by mixing 40ml of 0.100 M HCL with 25.00ml of 0.100 M KOH is 1.669.
The base and the acid have the same molarity, but the acid's volume is more than the bases' volume, hence after mixing the resultant solution is acidic.
The concentration of OH⁻ solution in the mixture is
= (molarity of base * volume of base - molarity of acid * volume of acid) / total volume
= (40 mL*0.1M - 25 mL *0.1 M ) / (40 mL +25mL)/ 1000)
= 0.021428571 M
pH = -log(0.021428571) = 1.669
Hence the pH is 1.669
To learn more about acidity, alkalinity, and bases,
https://brainly.com/question/11543614
#SPJ4
Which property would cesium most likely have?
It is hard.
It is ductile.
It is a gas.
It has low reactivity.
Answer:
It is ductile.
Explanation:
Cesium belongs to group 1 on the periodic table, meaning it is an alkali metal, not a gas. Alkali metals are soft, malleable, and ductile. They are good conductors of heat and highly reactive in nature, meaning cesium is also highly reactive. Therefore, the only option that would make sense is "It is ductile."
atoms from which of the following pairs are most likely to form an ionic bond? a) carbon and oxygen b) silicon and oxygen c) sodium and oxygen d) sulfur and oxygen
Atom pairs that are most likely to form an ionic bond is sodium and oxygen.
Thus, the correct option is C.
What is an ionic bond?А pаir of elements will most likely form аn ionic bond if one is а metаl аnd one is а nonmetаl. These types of ionic compounds аre composed of monаtomic cаtions аnd аnions. We cаn check the periodic tаble to see thаt the cаtions аre monаtomic ions formed from metаls, аnd the аnions аre monаtomic ions formed from nonmetаls.
Sodium is a metal, and oxygen is a nonmetal; therefore, [tex]N_{2} O[/tex] is expected to be ionic.
For more information about an ionic band refer to the link:
https://brainly.com/question/7297651
#SPJ4
Does alcohol really burn off when cooking? what are the possible substitutions for alcohol in recipes?.
Answer:Does alcohol really burn off when cooking? what are the possible substitutions for alcohol in recipes?
Explanation:
The longer you cook, the more alcohol cooks out, but you have to cook food for about 3 hours to fully erase all traces of alcohol. A study from the U.S. Department of Agriculture's Nutrient Data lab confirmed this and added that food baked or simmered in alcohol for 15 minutes still retains 40 percent of the alcohol.
A block and tackle is a rope and pulley system that uses multiple pulleys. It multiplies a small force into a large one. If a motor has a weight of about 2500 N and people pull 4.0 m of rope with a force of 700 N to raise the motor 1.0 m, how efficient is the block and tackle?
The efficiency of the machine is obtained as 89.3%.
What is a pulley?A pulley is one of the types of simple machine. We know that a simple machine has to do with anything that helps you to be able to do your work more efficiently.
We know that the efficiency has to do with how well the pulley is able to do work as we know. In this case we know that the efficiency is obtained from;
Work output/Work input * 100/1
Work output =2500 N * 1.0 m = 2500 J
Work in put = 700 N * 4 m= 2800 J
Efficiency = 2500 J/2800 * 100/1
= 89.3%
Learn more about machine efficiency:https://brainly.com/question/11752408
#SPJ1
I NEED THE ANSWER ASAP
Chemicals that have leached into the soil can be made harmless by _______________________. (binary fission, bioremediation)
Chemicals that have leached into the soil can be made harmless by bio remediation .
What is bio remediation?Bioremediation is a biotechnology process that reduces or eliminates pollution. It is a type of waste management technology that uses organisms to remove or recycle pollutants from polluted areas. There are several remedial measures to clean up contaminated water and solids through chemical treatment, incineration and landfill. There are other types of waste management technologies such as solid waste management, nuclear waste management, etc.Bioremediation is different because it does not use toxic chemicals.How does it work?Bioremediation relies on stimulating the growth of specific microorganisms that use contaminants such as oils, solvents and pesticides as food and energy sources.These microbes convert pollutants into small amounts of water and harmless gases such as carbon dioxide.Can learn more about bio remediation from
https://brainly.com/question/14353375?
#SPJ4
which group in the periodic table contains elements with the valence electron configuration of ns2np1?
group j neptunium Atomic number 93
How many moles in 3.22 g of aluminum chloride?
3.22 g containing aluminum chloride contains 0.0241486951 moles, making 1 mole of an element's atoms weigh the same as its atomic mass in grams.
Why would one use aluminum chloride?Rubber, lubricants, wood preservers, and paints are all made in large part using aluminum chloride. In both medications and pesticides, it is utilized. while melting aluminum, as a flux Antiperspirant is how you apply it.
For what purpose does deodorant contain aluminum chloride?Cosmetic and pharmaceutical goods frequently contain aluminum compounds. The components that stop sweating in antiperspirants are aluminum salts. To prevent sweat from collecting on your pores' surface, the salts must dissolve.
To know more about aluminum chloride visit;
https://brainly.com/question/29274485
#SPJ13
hydroxide ion is a stronger nucleophile than either water or ethanol, yet the addition of koh during the kinetic runs in this experiment has virtually no effect on the reaction rates. explain.
catalytic process, A Ni catalyst is required for amide and alcohol to make the right esters. hydroxide ion is a stronger nucleophile than either water or ethanol,
In general, catalytic activity is a chemical interaction between a catalyst and a reactant that yields chemical intermediates more readily able to react with one another or with another reactant to yield the desired end product. Catalysis is the process of accelerating a chemical reaction by adding a catalyst to it. Catalysts are unaffected by and are not destroyed by the reaction.
learn more about catalyst here:
https://brainly.com/question/28813725
#SPJ4
d. very polar compounds are sometimes purified by reverse phase chromatography where the stationary phase is very non-polar while the solvent is very polar. why would this technique be beneficial with extremely polar compounds?
very polar compounds are sometimes purified by reverse phase chromatography where the stationary phase is very non-polar while the solvent is very polar. this technique be beneficial with extremely polar compounds as it provides better solubility for the polar analytes.
The chromatography is the best technique to purified the organic compounds. if the stationary phase is polar it takes more times for polar molecule to absorbed in stationary phase. that's why we use reverse chromatography for the purified more polar compound.
Thus, very polar compounds are sometimes purified by reverse phase chromatography where the stationary phase is very non-polar while the solvent is very polar. this technique be beneficial with extremely polar compounds as it provides better solubility for the polar analytes.
To learn more about chromatography here
https://brainly.com/question/26491567
#SPJ4
what is the ph of a buffer with 0.462 m acetic acid and 0.355 m acetate. the ka for acetic acid is: 1.8 x 10-5
A buffer with 0.462 m acetic acid and 0.355 m acetate has a pH of 4.6. The acetic acid ka value is 1.8 x 10-5.
Buffer solution: What is it?The pH of a buffer solution won't change when small amounts of an acid or an alkali are added.
Simply put, a buffer solution that is acidic has a pH that is lower than 7. Acidic buffer solutions are normally made using a weak acid and one of its salts, frequently a sodium salt.
Alkaline buffer solution has pH higher than 7. The most common method for producing alkaline buffer solutions is to combine a weak base with one of its salts.
pH = -logKa + log([C₂H₃O₂⁻] / [HC₂H₃O₂])
ph = -log(1.8 × 10⁻⁵) + log(0.355 M / 0.462 M)
ph = 4.6
To know more about buffer solution, visit:
https://brainly.com/question/24262133
#SPJ4
what is the molarity of an ethanol (c2h6o) solution that was prepared by dissolving 50.500 g of ethanol into water to a final volume of 750.0 ml? assume the solution has a density of 1.20 g/ml.
The molarity of the ethanol is 11.29M .
What is molarity ?
Molar concentration, also known as molarity, amount concentration, or substance concentration, is a unit used to describe the amount of a substance in a solution expressed as a percentage of its volume. The number of moles per litre, denoted by the unit symbol mol/L or mol/dm3 in SI units, is the most widely used unit for molarity in chemistry. One mol/L of a solution's concentration is referred to as one molar, or 1 M.
The mass of one mole of ethanol is 46.07 g/mol.
The number of mole in 50.500 g ethanol is 50.500/46.07 = 1.096158 mole.
We know that,
Mass = Density × Volume.
The final volume of the solution 750.0ml and the density of the solution is 1.20g/ml.
The mass of the solution is 1.20g/ml × 750.0ml = 900 gm.
The mass of water is (900-50.500) = 849.5 gm.
So the term molarity is defined as:
One of the most common units of concentration, expressed in M. It is defined as no moles of solute in 1 liter of solution.
The molarity of the solution is:
(1.09615 × 1000)/ 849.5 = 1.29M (approx.).
To know more about molarity, click the given link ;
https://brainly.com/question/26873446
#SPJ4
Outline an alternative method and name equipment you could use to collect gas and work out the
volume produced in a more accurate way.
The alternative method to collect the gas and measure the volume is by a gas syringe.
What is a gas syringe?
Gas syringe is an equipment used to pump or withdraw gas from a closed container and can measure the volume of the gas produced in any chemical reaction.
The volume of the gas produced can be measured by reading the measuring scale on the gas syringe when the plunger moves in a gas syringe.
Hence, gas syringe is an alternative method to collect and measure the volume of the gas in a chemical reaction.
To learn more about other methods of collection of gas from the given link https://brainly.com/question/2120391
#SPJ13
what is the concentration of hydroxide ions after 50.0 ml of 0.250 m naoh is added to 120 ml of 0.200 m na2so4? please show all work.
The concentration of the hydroxide ions after 50 ml of 0.250M NaOH is added to 120ml of 0.200M Na2SO4 is 7.35 x 10^-2 M.
What is meant by concentration?
Concentration is the total amount of solute present in the given volume of solution. this is expressed in terms of molarity, molality, mole fraction, normality etc. The term concentration mostly refers to the solvents and solutes present in the solution.
Concentration of hydroxide ions can be calculated by,
M (OH^-) = V (NaOH) x M (NaOH) / V (total) = 50ml x 0.250M / 50ml + 120ml = 0.0735M = 7.35 x 10^-2 M.
where M (OH^-) = concentration of hydroxide ions, V(NaOH) = volume of NaOH, M(NaOH) = concentration of NaOH.
Therefore, the concentration of the hydroxide ions after 50 ml of 0.250M NaOH is added to 120ml of 0.200M Na2SO4 is 7.35 x 10^-2 M.
To learn more about concentration click on the given link https://brainly.com/question/17206790
#SPJ4
How would switching to solar power affect a city environment?
The ability of solar energy to lower greenhouse gas emissions is the first and possibly most well-known advantage of this technology. This occurs as a result of solar energy as a coal energy substitute (the production of which harms the environment). Solar energy generation and consumption don't contribute to air pollution or the release of greenhouse gases.
As a result, making the simple effort to get in touch with local solar providers and switching to sustainable energy can have a significant long-term benefit.
Overall, switching to renewable energy will enable you to achieve your goals for sustainable living while also saving money. For instance, using solar energy lowers greenhouse gas emissions. Additionally, it prevents stress on the ecosystem and the world's water supply.
Learn more about solar energy at:
https://brainly.com/question/27344926
When a chlorine atom reacts weith a sodium atom to form an ion, the chlorine atom will
Select one:
a.
gain one electron
b.
gain two electons
c.
lose two electrons
d.
lose one electon
Answer:
a) gain one electron
Explanation:
When the chlorine atom reacts with the sodium atom, it creates NaCl. Sodium would be your cation and chlorine would be your anion. A sodium atom (Na) has a 1+ charge while the chlorine atom (Cl) has a 1- charge. As a result, sodium would lose a valence electron causing chlorine to gain a electron.
. at the beginning of his experiment, josh has 10 g of element a and 10 g or element b. when finished with the experiment, josh has 20 g of element a and b combined. this demonstrates what law?
josh has 10 g of element a and 10 g or element b. when finished with the experiment, josh has 20 g of element a and b combined. This demonstrates ' Law of conservation of mass'.
In a closed system, mass cannot be created or destroyed, but it can be changed from one form to another. Thus, mass of a system remains same before and after the reaction.
To know more about 'Law of conservation of mass', click here,
brainly.com/question/24783543
#SPJ4
the pressure of a sample of argon gas was increased from 3.34 atm to 8.18 atm at constant temperature. if the final volume of the argon sample was 14.8 l, what was the initial volume of the argon sample? assume ideal behavior.
The initial volume of the argon gas sample at a constant temperature is 36.24 L.
Let the initial pressure and initial volume be P and V respectively
And the final pressure and volume be P' and V' respectively
At constant temperature, for the given sample,
P = 3.34 atm
V = ?
P' = 8.18 atm
V' = 14.8 L
The ideal gas law is PV = nRT,
At constant T (temperature), PV = constant
According to Boyle's law, the product of the pressure and volume of an ideal gas at constant temperature is constant.
For ideal gas argon at a constant temperature, using Boyle's law we get
P * V = P' * V'
3.34 * V = 8.18 * 14.8
V = 121.06 / 3.34
∴ V = 36.24 L
Thus at 3.34 atm and constant temperature, the volume of a sample of agon gas is 36.24 L
To learn more about ideal gas,
brainly.com/question/28257995
#SPJ4
What can you say to the movie san andreas you've watch?
It appears that your answer contains either a link or inappropriate words. Please correct and submit again!
This is what it keeps saying when I want to answer so I have commented my answer below:
how many coulombs are required to produce 77.0 g of lithium metal from a sample of molten lithium chloride?
1930 coulombs are required to produce 77.0 g of lithium metal from a sample of molten lithium chloride.
Weight of metal deposited = ECt / 96500, Applied charge= 1930C
Efficiency= 77%
Effective charge= 77/100 (1930)=1486.1C
96500C liberate 1 mole.
1447.5C liberates 1486.1 / 96500 moles = 0.0154 moles .
What is Molten lithium chloride ?LiCl-Li, a molten mixture of metallic lithium and lithium chloride, are crucial to the electrolytic reduction of a variety of metal oxides. Researchers have been studying these mixes' distinctive high temperature physical and chemical characteristics for decades.
Lithium metal is primarily made from lithium chloride by electrolyzing a LiCl/KCl melt at 450 °C (842 °F). LiCl is additionally employed in automotive parts as an aluminum brazing flux. As a desiccant, it dries out air streams.
To know more about Molten lithium chloride please click here ; https://brainly.com/question/28955893
#SPJ4
assume that you have produced the amount of 2-methylbenzoic acid from the previous question. what volume, in ml, of 6m naoh would you need to fully deprotonate the 2-methylbenzoic acid?
If we assume that you have produced the required amount of 2-methylbenzoic acid, then we would require 4.2 ml of 6m NaOH to completely deprotonate the 2-methylbenzoic acid.
Benzoic acid is more acidic than 2-methylbenzoic acid. because the +R (electron donating) nature of the methyl group causes the negative charge on the oxygen atom to become destabilized when the latter ions form 2 methyl benzoate ion. Consequently, it wouldn't have a propensity to emit H+.
An inorganic substance having the formula NaOH is sodium hydroxide, sometimes referred to as lye and caustic soda. Sodium cations and hydroxide anions make up this white solid ionic combination.
volume of 6 m NaOH = 6 1.8 = 4.2 ml.
Learn more about 2-methylbenzoic acid here
https://brainly.com/question/12973199
#SPJ4
I WILL GIVE BRAINLY PLS HELP
Answer:
Ice wedging
Explanation:
The rocks crack fill with water and then expand
the ground state electron configuration ofor the snigle electron in the hydrogen atom is 1s^1. what are the values of the ml and ms quantum numbers for this electron?
ml= 0 ms = +1/2 are the values of the ml and ms quantum numbers for this electron
What is quantum numbers ?
A total of four quantum numbers are used to fully describe the motion and trajectory of each electron in an atom. The combination of all quantum numbers of all electrons in an atom is described by a wave function corresponding to the Schrödinger equation. . Quantum numbers are important because they can be used to determine the electron configuration of atoms and the putative positions of atomic electrons. Quantum numbers are also used to understand other properties of atoms such as: B. Ionization energy and atomic radius.
Atoms have four quantum numbers: principal quantum number (n), orbital angular momentum quantum number (l), magnetic quantum number (ml), and electron spin quantum number (ms). The principal quantum number n is the energy of an electron and probable distance from the nucleus. In other words, it says to the size and energy level of the orbital in which the electron is placed. The number of subshells or l describes the shape of the orbitals. It can also be used to determine the number of angular nodes. The magnetic quantum number ml represents the energy level in the subshell and ms represents the electron spin. This is either upwards or downwards.
To learn more about quantum numbers , click the link below ;
https://brainly.com/question/2578606
#SPJ4
Which atom’s ionization energy is greater than that of phosphorus (P)?
A) Ba
B) K
C) As
D) Cl
D.) CI
Explanation:Hi and Bye, have a good one. '^'
24. what is the relationship between the number of bonds between two atoms and bond strength? bond length?
The strength of the bond describes how closely each atom is connected to another atom and how much energy is required to break that connection. The bond length is the average distance between the two atomic nuclei of two molecules that are joined together.
Define bond strength:The strength of the bond indicates how strongly each atom is bound to another and how much energy is expended in doing so. The force that a chemical bond utilizes to hold two atoms together is known as bond strength. The amount of energy required to break the bond is expressed in terms of the kilocalories per mole.
Define bond length:The equilibrium separation between the nuclei of two bound atoms in a molecule is referred to as the bond length. The bond length increases with increasing atom size. Bond multiplicity cause decrease in bond length. Rotational spectroscopy, X-ray diffraction, and other methods are used to measure it.
To know more about bond length and bond strength, visit:
https://brainly.com/question/16184386
#SPJ4
3. a student required 0.40 ml more naoh than she calculated she would need in question 1. explain how this might happen.
A student required 0.40 ml more NaOH than because it will use unstable indicator.
Chemical indicator, any substance which indicates visibly the existence or disappearance of a threshold concentration of such a chemical species, for instance an acid or a caustic in a solution, typically through a color change. One such chemical is methyl yellow, which gives an alkaline liquid a yellow color.
Indicators were weak acids as well as bases which exhibit a colour change when hydrogen ion quantity in a solution varies or as a solution's pH changes. In the water, the indicators gently separate to produce ions. Indicators include things like Litmus, turmeric, phenolphthalein, etc.
To know more about indicator.
https://brainly.com/question/15414351
#SPJ4
Bond length. Need help solving with explanation I can understand please
The bond length or separation between the two nuclei of X in a molecule of X2A with elemental bond length of 2.22A and 4.28A is 6.5A.
What is bond length?
The bond length or bond distance can be defined as the average distance between the nuclei of the bonded atoms in the given molecule. If it is a polyatomic molecule the bond distance can be calculated by adding the atomic radius of all the atoms involved in bonding.
The separation or bond length of the molecule X2A can be calculated as,
The bond length of elemental A = 2.22A
The atomic radius of A = 2.22 / 2 = 1.11A
The bond of elemental X = 4.28A
The atomic radius of X = 4.28 / 2 = 2.14A
The bond length of molecule X2A = (2.14 + 1.11) x 2 = 6.5A.
Therefore, the bond length or separation between the atoms X in the given molecule is 6.5A.
To learn more about the bond length click on the given link https://brainly.com/question/16012396
#SPJ1
an ideal gas sample has a certain volume at 350 k and 1 atm. the volume of the same sample at stp will be closest to the volume at 350 k and 1 atm multiplied by:
0.78 m³ is the volume of the same sample at standard temperature and pressure(stp) will be closest to the volume at 350 k and 1 atm.
What is ideal gas?The ideal gas law (PV = nRT) explains how the macroscopic properties of ideal gases are connected. The particles in an ideal gas are those that: (a) do not interact with one another; and (b) take up no space (have no volume). The ideal gas law does provide a good approximation of real gas behavior in many circumstances, but no gas is truly ideal.
PV = (nRT)
Where;
P₁ = initial pressure = 1 atm
V₁ = initial volume = 1 m³
T₁ = initial temperature = 350 k
P₂ = final pressure = 1 atm
V₂ = final volume = ?
T₂ = final temperature = 273 k
P₁V₁ / T₁ = P₂V₂ / T₂
Solving for V₂;
V₂ = P₁V₁T₂ / P₂T₁
V₂ = 1 × 1 × 273/350
V₂ = 273/350 m³
V₂ = 0.78 m³
To know more about ideal gas equation, visit:
https://brainly.com/question/28837405
#SPJ4