escape room ocean and air currents. Escape room

The order of marbles can be Aluminum, Nickel, Silver, and Rhenium.

If volume is the amount of three-dimensional space contained by a closed surface, such as the amount of space within a given cube, cylinder, or other three-dimensional shape.

Liquid volume is a way to measure an amount of liquid by describing how much three-dimensional space it occupies.

The mass of something is the amount of stuff it is made of. The volume of an object is the amount of space it usually takes up.

Density provides an easy way to calculate a body's mass from its volume or vice versa.

The mass is equal to the volume multiplied by the density (M = Vd), and the volume is equal to the mass divided by the density (V = M/d).

As per the density given, the volume of aluminum can be 1.11mL, Silver is 0.286mL, Rhenium is 0.144mL, Nickel is 0.337mL.

Thus, the order from largest to smallest will be Aluminum, Nickel, Silver, and Rhenium.

For more details regarding volume, visit:

https://brainly.com/question/1578538

#SPJ2

Answer:

A-B) 94 %.

C) 17.9 %.

D) 35.8 %.

Explanation:

Hello!

A-B) In this case, since the total mass of the mixture is 3.02 g and 1.43g+1.41g=2.84 g are recovered in total, we can compute the percent recovery as shown below:

[tex]\%rec=\frac{2.84g}{3.02g}*100\%\\\\\%rec=94\%[/tex]

C) Here, since the solution is made up of NaCl and water, we can say that the mass of the solution is 15g+69g=84g; thus, the percent by mass would be:

[tex]\%=\frac{15g}{84g}*100\%\\\\\%=17.9\%[/tex]

D) In this case, we simply divide 26.1 g by 73.0 g in order to obtain the percent:

[tex]\%=\frac{26.1g}{73.0g}*100\%\\\\\%=35.8\%[/tex]

Best regards!

The percentage in the cases are as follows;

Questions A and B are similar and can be solved as follows;

Question C can be solved as follows;

Question D can be solved as follows;

Read more:

https://brainly.com/question/24712879

Answer:

1 qualiative physical  

2 qualiative   chemical

3 quantitative physcial

4 quantiative chemical

5qualiative   physcial

6quatiative    chemcial

7quanatiative physcial

8 qualiative   chemical

9quatliate  physcial

Answer:

Turning off the water while brushing teeth, watching shower time.

Explanation:

Answer:

Take shorter showers.

Install water-saving shower heads or flow restrictors.

Turn off the water while brushing your teeth.

Turn off the water while shaving.

Explanation:

have a nice day

Answer:

The molarity (M) of a solution is the number of moles of solute dissolved in one liter of solution. To calculate the molarity of a solution, you divide the moles of solute by the volume of the solution expressed in liters.

Explanation:

Answer:

any of these

Explanation:

kinetic energy: kinetic is motion, or released energy

Potential energy: porential energy is the energy of position or stored energy.

Thermal energy: is heat energy, it is stored energy that creats heat.

Answer: Volume required is 0.115 L or 115 ml

Explanation:

moles of [tex]NaHCO_3[/tex] = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{1.30g}{84g/mol}=0.015mol[/tex]

The balanced chemical equation is:

[tex]HCl+NaHCO_3\rightarrow NaCl+H_2CO_3[/tex]

1 mole of [tex]NaHCO_3[/tex] requires = 1 mole of HCl

Thus 0.015 mol of [tex]NaHCO_3[/tex] requires = [tex]\frac{1}{1}\times 0.015=0.015[/tex] mole of HCl

Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.

[tex]Molarity=\frac{n}{V_s}[/tex]

where,

n = moles of solute

[tex]V_s[/tex] = volume of solution in L

[tex]0.130=\frac{0..015}{V_s}[/tex]

[tex]V_s=0.115L[/tex]

Thus volume required is 0.115 l or 115 ml

Answer:

I would not accept it.

Explanation:

Although it is tempting to accept the janitor's offer and save the scholarship, which is not easy to get, I would not accept his offer, as I do not believe in victories based on dishonesty and would be heavy on conscience if I did the opposite. Obviously, I would not like to lose my scholarship and for that reason, I would look for other ways that would be honest and help me improve my grade. If I could not improve and lose the scholarship, I would be extremely sad, but I would be at peace with my conscience.

Answer:

The limiting reagent is the reactant that is used up completely. This stops the reaction and no further products are made. ... The limiting reagent can also be derived by comparing the amount of products that can be formed from each reactant.

Answer:

The limiting reagent is the reactant that is used up completely. This stops the reaction and no further products are made. ... The limiting reagent can also be derived by comparing the amount of products that can be formed from each reactant.

Explanation:

Disclaimer not my answer I looked it up

Answer:

A. Eight

Explanation:

Although there are eight major endocrine glands scattered throughout the body, they are still considered to be one system because they have similar functions, similar mechanisms of influence, and many important interrelationships.

Answer:

0.0258 mol Answer .......

Answer:

1.8 J/g·°C (2 sig.figs. per ΔT)

Explanation:

Given:

mass (m) = 78.9 grams

specific heat (c) = ?

Temp. Change (ΔT) = 109°C - 18°C = 91°C

Heat flow (q) = 13,240 Joules

q = m·c·ΔT => c = q/m·ΔT

∴c = 13,240J / 78.9g·91°C = 1.844 J/g·°C ≅ 1.8 J/g·°C (2 sig.figs. per ΔT)

Answer:

a. Larger molecular size

b. Ability to react with water

c. Polarity

d. Shorter bond length

Explanation:

Ethene is a larger molecule than oxygen and nitrogen hence it is more soluble than the both other gases .

SO2 dissolves readily in water to yield an acid solution. It is an acid anhydride.

Nitric oxide is a polar compound. It remains very much polar while nitrogen and oxygen are non polar.

Nitrogen is sp hybrized, this leads to a very short bond and does not easily interact with oxygen and nitrogen

Answer: [tex]Bi(OH)_3+3HNO_3\rightarrow 3H_2O+Bi(NO_3)_3[/tex]

Explanation:

According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side. Thus chemical equations are balanced.

The balanced equation will be:

[tex]Bi(OH)_3+3HNO_3\rightarrow 3H_2O+Bi(NO_3)_3[/tex]

Answer:

symbiotic

Explanation:

There like a close friendship

Answer:

5.6 L is the final volume for SO₂ at STP condtions

Explanation:

The reaction is:  S(s) + O₂ (g) →  SO₂ (g)

Ratio for this reaction is 1:1, if we see stoichiometry.

1 mol of sulfur can react to 1 mol of oxygen in orden to produce 1 mol of sulfur dioxide.

Then, 0.250 moles of sulfur can produce 0.250 moles of SO₂.

If we solve this by a rule of three, we can say:

At STP 1 mol occupies 22.4L

Then, 0.250 moles will be contained at (0.250 mol . 22.4L) /1mol = 5.6 L

If we apply the Ideal Gases Law:

P . V = n . R . T

1 atm . V = 0.250 mol . 0.082 . 273K

V = (0.250 mol . 0.082 . 273K) / 1atm → 5.6 L

Answerroweo'gfnagnas;gns;BGr;kv

Explanation:

Answer:

See explanation

Explanation:

The mechanism involves SN1 nucleophilic substitution reaction. The -OH group of the alcohol is first protonated. Since water is a good leaving group, -OH2 leaves the substrate creating a primary carbo cation.

A 1,2 methyl shift now occurs to create a tertiary carbo cation which is more stable leading to the major product shown in the image attached to this answer.

Answer:

. 750 M

Explanation:

Answer and Explanation:

It is not necessary to know the amount of salt in the aqua, because we know that the presence of salt in the water will increase its density.

In this case, salt increases the mass of the water, without increasing the volume of water. as the egg will not change in volume or water, we know that the density of the egg will be constant, while the change in the mass of the water with the addition of salt, will change the density of the water which will increase progressively until it becomes denser than the egg and, consequently, it will not let the egg sink.

Answer:

Noble gases are sometimes called "inert gases." What can you infer about the meaning of the word "inert" in chemistry? It refers to substances that easily lose electrons. It refers to substances that do not react with other substances. It refers to substances that have strong electrochemical charges.

Explanation:

Answer:

0.03 M

Explanation:

The computation of the molarity of the diluted HCI is given below:

As we know that

(M1) × (V1) = (M2) × (V2)

Now

(M2) = {(M1) × (V1)} ÷ (V2)

or

Molarity of the diluted HCl,(M2) is

= {6 × 25} ÷ 5000

= 0.03 M

Answer: The vapor pressure of a solution in which the mole fraction of the solute is 0.200 is 80.0 torr

Explanation:

As the relative lowering of vapor pressure is directly proportional to the amount of dissolved solute.

The formula for relative lowering of vapor pressure will be,

[tex]\frac{p^o-p_s}{p^o}=i\times x_2[/tex]

where,

[tex]p^0[/tex]= vapor pressure of pure solvent = 100.0 torr

[tex]p_s[/tex] = vapor pressure of solution = ?

i = Van'T Hoff factor = 1 for nonvolatile, nonelectrolyte solute

[tex]x_2[/tex] = mole fraction of solute  = 0.200  

[tex]\frac{100.0-p_s}{100.0}=1\times 0.200[/tex]

[tex]p_s=80.0torr[/tex]

The vapor pressure of a solution in which the mole fraction of the solute is 0.200 is 80.0 torr

Answer:

true

Explanation:

Prophase is the first stage in mitosis, occurring after the conclusion of the G2 portion of interphase. During prophase, the parent cell chromosomes which were duplicated during S phase condense and become thousands of times more compact than they were during interphase.

Answer:

630.95 grams of Na₂CO₃ would be needed to produce 1000g of NaHCO₃

Explanation:

The balanced reaction is:

Na₂CO₃ + CO₂+ H₂O → 2 NaHCO₃

By stoichiometry of the reaction (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of each compound participate in the reaction:

Being the molar mass:

Then by stoichiometry the following quantities of mass participate in the reaction:

You can apply the following rule of three: if 106 grams of Na₂CO₃ are needed to produce 168 grams of NaHCO₃, how much mass of Na₂CO₃ is necessary to produce 1000 grams of NaHCO₃?

[tex]mass of Na_{2} CO_{3}=\frac{1000grams ofNaHCO_{3} *106gramsofNa_{2} CO_{3} }{168grams ofNaHCO_{3}}[/tex]

mass of Na₂CO₃= 630.95 grams

630.95 grams of Na₂CO₃ would be needed to produce 1000g of NaHCO₃

Answer:

RCl

Explanation:

Here, let us take ROH to represent the formula of our alcohol where R is the alkyl group.

The reaction of ROH with  tosyl chloride yields an ester called a tosylate. It is the O-H bond not the C-O bond that is cleaved when the tosylate is formed.

Tosylates are good leaving groups, attack of a nucleophile such as Cl^- completes the mechanism leading to the formation of RCl.

Answer:

H^+(aq) + OH^-(aq) --------> H2O(l)

Explanation:

We must first obtain the molecular equation, the net ionic equation before we obtain the net ionic equation.

The molecular reaction equation is;

HF(aq) + NaOH(aq) -------> H2O(l) + NaF(aq)

The complete ionic equation is;

H^+(aq) + F^-(aq) + Na^+(aq) + OH^-(aq) --------> H2O(l) + Na^+(aq) + F^-(aq)

The net ionic equation is;

H^+(aq) + OH^-(aq) --------> H2O(l)

Answer:

665.22

Explanation:

you see wich numbers after the decimal points have the least numbers, the one with the least u have to round your answer to that

After performing the required mathematical operation (addition), the answer is equal to 665.22.

In Mathematics, significant figures can be defined as the number of single digits or numerical values in the coefficient of a mathematical expression that are important and meaningful.

Since "653.12" has two (2) significant figures, we must ensure that 12.10247 also has two (2) significant figures as follows:

12.10247 to 2 S.F = 12.10.

Next, we would perform the required mathematical operation (addition):

653.12 + 12.10 = 665.22.

Read more on significant figures here: https://brainly.com/question/24491627

#SPJ9

Answer:

Released

Explanation:

they convert into a form of energy that can be used by cells