Answer:
[tex]Mass = 102g[/tex]
Explanation:
Given
Compound: [tex]Al_2O_3[/tex]
Required
Determine the equivalent mass
In the above compound, we have: 2 Al and 3 (O)
The atomic mass of Aluminium is:
[tex]Al = 27[/tex]
The atomic mass of Oxygen is:
[tex](O) = 16[/tex]
So, the equivalent mass is:
[tex]Mass = 2 * 27 + 3 * 16[/tex]
[tex]Mass = 54 + 48[/tex]
[tex]Mass = 102g[/tex]
how is wind energy captured?
where is wind energy found?
how is water energy captured?
where is water energy found?
plz use the passage i put. plz and thank you!!!!!
HELP IN 8TH GRADE ADV SCIENCE
Answer:
protons: 36
neutrons: 48
electrons: 36
Which of the following reactants will generate products with a solution of phosphoric acid?
a
Al(s)
b
Cu(s)
c
Au(s)
d
Ag(s)
Answer:
A. Al(s)
Explanation:
When using a light microscope, focus the specimen with the scanning objective
lens first.
Reasoning:
Answer:
The light microscope bends a beam of light at the specimen using a series of lenses to provide a clear image of the specimen to the observer.
What would happen if a neutron was added to Lithium (7)
Answer:
if you add a neutron to lithium-7 it becomes a compound nucleus of lithium-8
A molecule contains 24.36 g of nitrogen and 62.64g of sliver
Answer:
This molecule is AgN3
Explanation:
Answer:
AgN3
Explanation:
Mass of nitrogen N is given as 24.36 g
Molar mass of nitrogen N= 14 g/mol.
amount of substance in mol of N = mass/molar mass
=24.36 g/ 14 g/mol.
=1.74 mol.
Given mass of silver= 62,64 g.
Molar mass of silver Ag=107.87 g/mol
Number of mols=62.64 g ÷ 107.87 g/mol.
=0.58 mol.
Ratio of number of mol of N and number of mols of Ag = 1.74 mol / 0.58 mol
=3:1
Hence, empirical formula is AgN₃.
The __________ system is responsible for bringing oxygen into the lungs and releasing carbon dioxide from the body
Answer: ̄ノ゙(。・∀・)ノ゙o(* ̄▽ ̄*)ブ(* ̄3 ̄)╭o(* ̄▽ ̄*)ブ(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭•)>⌐)↖↗↘↙↜↚↯↟↝↖↔↕↙↘↙↘↘↞↴↯↚↨⇌⇋⇆⇉⇑↶⇋⇋↳¾⁷¼¼⁶⁴⁷⁰⁰⁰⁹⅕⅘⅓⅕⅓⅕⨊⨡⨔⨩⨦⨶⨼⨿⨷⨷⨻⨼⨹₴ The answer is resperitory
Explanation:
As shown by the periodic table, why do the elements potassium and sodium have similar chemical properties?
During a chemical or physical change, energy may be...
a. created into another form
b. destroyed and reinvented into another form
c. converted into another form
d. disappeared
Answer: C: Converted into another form
Explanation: pues es esa calale y si va a hacer
During a chemical or physical change, energy is converted to another form. Energy cannot be created or destroyed. During a chemical reaction, physical change the energy and mass are conserved.
What is law of conservation of energy ?According to the law of conservation of energy energy can neither be crated nor be destroyed. Hence, the total energy of a system is always conserved.
However, energy can be transformed from one form to the other. Therefore, the energy lost in one form is gained in another form. For example, in all electrical devices, the electrical energy is converting to other forms of energy such as light, thermal , mechanical etc.
Similarly, during a chemical reaction, the energy released by a reaction system is equal to the energy absorbed by other reacting system. Similarly in electrochemical cells the chemical energy is converting to electrical energy.
Find more on energy transformation:
https://brainly.com/question/17589256
#SPJ6
Which substance is correctly identified as a homogeneous or heterogeneous mixture?
A. salad -- heterogeneous
B. milk --- heterogeneous
C. river water --- homogeneous
D. beach sand --- homogeneous
Answer:
A
Explanation:
A salad with lettuce, cheese, seeds, tomatoes, broccoli, and other vegetables is an example of a heterogeneous mixture.
Milk is not mixed with anything so that is incorrect
River water is mixed in with dirt and minerals so this one is incorrect
Beach sand is incorrect because you can see colored particles.
When we drink water, it is absorbed into our blood through the digestive tract. If the concentration of water in body cells is low, cells must get water from the blood. What process allows water to enter body cells from the blood?
Answer:
Osmosis
Explanation:
Water is very essential for the body. When we drink water, our blood cells absorbs water from the body. This happen by a process called as osmosis process. Osmosis is type of diffusion process.
Water along with oxygen and carbon dioxide are some of the simple molecules that moves into the blood cell. Osmosis is the process by which water molecules passes into the cell bodies through its semi permeable membrane.
i need to know what occupied vs full means for chemistry
What caused space technology to improve so quickly?
Answer:
“spinoff”
Explanation:
Here is just a sampling of the many “spinoff” technologies, as NASA refers to them, resulting from space research and development that we now use in everyday life.
2CuO+2NH3------ 3Cu + 3H2O+ N2. Given that the relative molecular mass of copper oxide is 80, what volume of ammonia is required to completely reduce 120 g of Copper oxide? ( Cu=64, O=16, N=14)
Volume of Ammonia(NH₃) = 22.4 L
Further explanationGiven
Reaction
3CuO+2NH₃⇒ 3Cu + 3H₂O+ N₂
In the problem, the CuO coefficient should be 3 not 2
M CuO = 80
mass CuO = 120 g
Required
The volume of NH₃
Solution
mol CuO :
[tex]\tt mol=\dfrac{mass}{M}\\\\mol=\frac{120}{80}\\\\mol=1.5[/tex]
From the equation, mol ratio CuO : NH₃ = 3 : 2, so mol NH₃=
[tex]\tt \dfrac{2}{3}\times 1.5=1~mol[/tex]
Assume at STP(0 °C, 1 atm) ⇒1 mol = 22.4 L, then volume of NH₃=22.4 L
What is it called when elements combine to form a chemical compound?
Explanation:
A compound is a unique substance that forms when two or more elements combine chemically.Compounds form as a result of chemical reactions. The elements in compounds are held together by chemical bonds. A chemical bond is a force of attraction between atoms or ions that share or transfer valence electrons.hope it helpful ✌️✌️
What is the molecular formula of the molecule that has an empirical formula of CH2O and a molar mass of 120.12 g/mol
Answer:
C4H8O4
Explanation:
Let (CH20)x
C=1*12.01=12.01 (12.01, 1.01, 16.00 Avg mass of elements)
H=2*1.01=2.01
O=1*16.00=16.00
12.01 + 2.01 + 16.00 = 30.03
120.12/30,03=4
==> (CH2O)4 = C4H8O4
The molecular formula of the molecule that has an empirical formula of [tex]CH_2O[/tex] is equal to [tex]C_4H_8O_4[/tex].
Given the following data:
Empirical formula = [tex]CH_2O[/tex]Molar mass = 120.12 g/mol.Scientific data:
Molar mass of oxygen = 16 g/mol.Molar mass of hydrogen = 1 g/mol.Molar mass of carbon = 12 g/mol.To determine the molecular formula of the molecule that has an empirical formula of [tex]CH_2O[/tex]:
First of all, we would find the molar mass of [tex]CH_2O[/tex]:
[tex]CH_2O =12 +(1\times2)+16\\\\CH_2O =30\;g/mol[/tex]
For molecular formula:
[tex](CH_2O)n = 120.12\\\\30n = 120.12\\\\n=\frac{120.12}{30}[/tex]
n = 4.0
[tex](CH_2O)_4 = C_4H_8O_4[/tex]
Read more: https://brainly.com/question/21280037
PLEASE HELP !!
Use the diagram below to answer the following questions.
PLEASE HELP
E TE
Figure B
In Figure B, which region contains the noble gas family of elements?
ОА
OD
ОС
OB
Noble gas located in the region D
Further explanationNoble gas are located in group 18 in the periodic table consisting of helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), have a stable electron configuration where the valence electrons are 8(full outer shell of electrons), so it is very hard to react because of its stability
If we look at the periodic system of the elements, the noble gases are on the far right, so that in Figure 8 it is located in area D
And the other region :
A : alkali elements(group 1),
B : alkaline earth elements(group 2)
C : halogen elements(group 17)
Methane(CH4) is a gas at room temperature, Methanol (CH3OH) is a liquid. Explain why using types of intermolecular forces present.
Explanation:
Methane is a gas at room temperature but methanol is a liquid because in methane there's London dispersion intermolecular force but in methanol there's H-bond and London dispersion force. H-bond is more stronger than London dispersion force. So, it increases the boiling point of methanol that's why methane is gas at room temperature due to weak attraction of London dispersion force and methanol is liquid.
Methanol has a higher boiling point than methane due to stronger intermolecular forces (IMFs), or attraction between individual molecules. This makes its molecules more difficult to separate, requiring more energy and resulting in a higher boiling point.
What are intermolecular forces?An intermolecular force is a force that mediates the interaction of molecules, including electromagnetic forces of attraction or repulsion that act between atoms and other types of neighboring particles, such as atoms or ions.
Intermolecular forces are classified into five types namely,
Ion-dipole forces.Ion-induced dipole forces.Dipole-dipole forces.Dipole-induced dipole forces.Induced dipole forces.Between ions and polar dipole molecules, ion-dipole forces exist.
Since of stronger intermolecular forces (IMFs), or attraction between individual molecules, methanol has a higher boiling point than methane.
This makes it more difficult to separate its molecules, requiring more energy and resulting in a higher boiling point.
Thus, this is the reason of using types of intermolecular forces present.
For more details regarding intermolecular forces, visit:
https://brainly.com/question/9007693
#SPJ2
What is the molar mass of phosphorus pentachloride and uranium hexafluoride?
Answer:
PCl₅ = 208.22g/mol. UF₆ = 352.03g/mol.
Explanation:
Find the atomic mass of each element–and if there's a subscript (you multiply the atomic mass by that much). P= 30.97g, Cl= 35.45g; 30.97+35.45(5) = 208.22g [same idea with UF₆]
Which of these are an atom's valence electrons?
Answer:
The Outer-most Electron shell contains the valence electrons.
Bonus Info:
Valence Electrons are used by atoms to make ionic bonds.
Answer:
Valence electrons are the electrons in the outermost shell, or energy level, of an atom. For example, oxygen has six valence electrons, two in the 2s subshell and four in the 2p subshell. We can write the configuration of oxygen's valence electrons as 2s²2p⁴.
Explanation:
ur welcome
i was doing this in school and i watched a video
EMERGENCY!!! Can someone tell me the answer plz plz I’ll give you brainlist and points plz This is my final test No wrong answers
Answer:
A. the valence electrons
Explanation:
Answer:
The valence electrons
Explanation:
The valence electrons determine an element's properties because chemical properties of each element are determined by the element's electronic configuration and PARTICULARLY by its outermost valence electrons. I hope it helps!
~Good luck
SOMEONE HELP ME PLEASE ILL GIVE BRAINLY
12.3 moles of sodium is what mass of Na?
Answer:
1 mole of Na = mass of 22.99 g, 1 mole of Si = mass of 28.09 g.
What is the name given to the group 0 elements
Answer:
the noble gases
What is the rise in sea level between 1930 and 2003?
A)
About 20cm
B)
About 16cm
C
About 12cm
Answer:
about 16
Explanation:
its 20 - ( approximately 5)
= approximately 16
Answer:
It should be (C) about 12cm
What is this called? it might be sideways but it show look like a Y
Answer:
I'm thinking it might be Element 39: Yttrium, as this is Chemistry.
Explanation:
What is environment?
Answer:
where an organism lives which includes everything that surrounds and influences the organism.
Two substances in a mixture differ in density and particle size. theses properties can be used to
Answer:
option 1. Two substances in a mixture differ in density and particle size. These properties can be used to separate the substances. These properties can be manipulated in order to have a better separation between the two substances.
Explanation:
Answer:
Two substances in a mixture differ in density and particle size. These properties can be used to separate both of them using the separating funnel or using filtration (filter paper).
Explanation:
Since their densities are different, one substance should float above the other in the mixture which allows for the separating funnel to let the substance sinking below (with the heavier density) to flow out first before changing the beaker to let the lighter substance flow out.
The substance with a bigger particle size would not be able to pass through the filter paper unlike the substance with the smaller particle size as the filter paper's pores is not big enough for it to pass through, separating both substances (with one on the paper and the other outside the filter paper, preferably in the beaker placed below the paper).
what's the molar mass of Li3p
Answer:
51.79g Li₃P.
Explanation:
Li has a molar mass of 6.94 g (since there are 3, you multiply it 3 times) and P has a molar mass of 30.97 g. 6.94(3) + 30.97 = 51.79g.
For complete combustion of an organic compound needs 8 molecules of oxygen, what could the formula of this compound be?
Answer:
C5H12.
Explanation:
The compound will be C5H12.
Now consider the general formula for the combustion of an alkane;
CnH2n+2 + 3n+1/2O2-----> nCO2 + (n+1) H2O
If we substitute n=5, we have;
C5H12 + 8O2-----> 5CO2 + 6H2O
Hence the answer above.