Equal volumes of 0.2 M solutions of lead (II) nitrate and potassium bromide are combined to form lead (11) bromide as a yellow precipitate. Which of the following is the correct net ionic equation for the reaction? (A) Pb 2+ (aq) + 2Br. (aq) → PbBra(s) (B) K. (aq) + NO3- (aq) → KNO3 (s) (C) Pb 2+ (aq) + 2NO3- (aq) + 2K+ (aq) + 2Br. (aq) → PbBr2(s) + 2K+ (aq) + 2NO3- (aq) (D) Pb(NO3)2 (aq) + 2KBr (aq) → PbBr2 (s) + 2KNO, (aq)

The net ionic equation for the reaction (if any) that occurs when aqueous solutions of sodium sulfide and iron(II) nitrate are mixed.

The answer is:-

[tex]2Na^{+}(aq) + S^{2-} + Fe^{2+} + 2NO_{3}^{-}(aq) -- > 2Na^{+}(aq) + 2NO_{3}^{-}(aq) + 2FeS(s)[/tex]

Ionic Equation:-

an ionic equation is a chemical equation in which the electrolytes in an aqueous solution are expressed as dissociated ions. Usually, this is a salt dissolved in water, where the ionic species are followed by (aq) in the equation to indicate they are in an aqueous solution.

Learn more about ionic equations here:-

https://brainly.com/question/15466794?referrer=searchResults

#SPJ4

alpha polonium crystallizes in a simple cubic unit cell with an edge length of 336 pm, the density becomes 7.318 g/cm³.

The smallest repeating unit with complete crystal structural symmetry is designated as a unit cell. The unit cell geometry, sometimes referred to as a parallelepiped, provides six lattice parameters, which are the lengths of the cell edges (a, b, and c) and the angles at which they are spaced apart ( α,β,γ ).

Given that,

alpha polonium crystallizes in a simple cubic unit cell with an edge length (a) of 336 pm.

As we know, the relation between radius (r) and edge length (a) for simple cubic unit cell is: 2 r = a

Thus, r = a/2

r = 336/2   [ given a = 336 pm]

r = 168 pm

Now, density (d) = (Z × M) / a³ × [tex]N_A[/tex]

Here, Z = number of atom in a simple cubic unit cell = 1

M = molecular weight of polonium

[tex]N_A[/tex] = Avogadro's no.

d = ( 1  × 209) / (168 ×10⁻¹²)³ × (6.023 × 10²³)

d = 7.318 × 10⁷ g/m³

d =  7.318 g/cm³

So, the density of alpha polonium is 7.318 g/cm³.

To know more about unit cell refer to:

https://brainly.com/question/8305059

#SPJ4

The Concentration is 0.055 M

Solution:

pOH = 1/2(pKb - logC)

pOH = 14-pH = 14-10.31 = 3.69

pKb = -log kb = -log 7.100 x 10-7 = 64

3.69 = 1/2(6.12-log C)

Concentration = 0.055 M

Solution concentration is defined as the amount of solute present in a given volume of solution. It can be expressed as mass x mass percent of solution = mass of solute mass in solution × 100. mass x volume percent of solution = mass of solute mass in solution × 100.

By focusing, you can make better use of your resources and tackle problems more efficiently. When you concentrate, you are less likely to miss important information. Staying focused makes it easier to remember things. Focus means control of attention. It is the ability to focus the mind on a subject or an object.

Learn more about The Concentration here:- https://brainly.com/question/17206790

#SPJ4

When ethyne or acetylene reacts with cold KMnO₄, the triple bond gains 4 OH. Oxalic acid is produced when it is oxidized by a diluted dilute solution of potassium permanganate.

Incomplete combustion of ethanol produces carbon dioxide, carbon monoxide, and water vapor. Ethyne (acetylene) now emits a sooty flame when burned in air. This is because there isn't enough oxygen in the air to melting metals for metals, which leads to incomplete combustion.

Acetylene, also known as ethyne, is the most basic and well-known constituent of the hydrocarbons series known as the acetylenic sequence, or alkynes, which has zero maybe more pairs of carbons joined by triple bonds.

To know more about ethyne visit:

https://brainly.com/question/4225077

#SPJ4

Solar radiation and convection currents work together to form weather patterns because the plants need sun, water, and damp soil for photosynthesis.

This is referred to as the process in which green plants manufacture their food in the presence of sunlight. The green pigment in plants which is known as chlorophyll is responsible fir the trapping of sunlight which helps provide the energy needed for the reaction.

Solar radiation and convection currents help in the formation of weather patterns because the area which is facing the sun is said to be experiencing summer and vice versa.

They also help plants grow by providing the plants with resource such as the sun, water, and damp soil etc which are needed for photosynthesis.

Read more about Photosynthesis here https://brainly.com/question/19160081

#SPJ1

Iodine-123, which has a 13.3-hour half-life and a 25 mg initial concentration, will have 3.09 mg after 39.9 hours.

Using a first-order kinetics equation,

log C = logC0-Kt/2.302

An arrangement of chemical reactions where the rate of the reaction is proportional to the amount of the reactant and is dependent on the concentration of just one reactant.

The half-life of idodine- 123 is 13.3 hours.

from the formula of half-life K can be calculated.

The period of time it takes for a sample's ingredient to decrease by half in your body is known as the half-life.

T1/2 = 0.693/ K

13.3 hours= 0.693/K

K= 0.052 [tex]hour^{-}[/tex]

Substituting the value of K, C0, and t in the equation of first-order kinetics

logC= log(25) - 0.052 × 39.9/ 2.303

logC = 1.39-0.90

logC= 0.49

C= antilog (0.49)

C= 3.09 mg

For more information on first-order kinetics kindly visit to

https://brainly.com/question/21881139

#SPJ4

Partial bonding, for example, as part of a resonance hybrid, often results in structures with fractional bond orders.

What is Partial bonding?

When a pi electron is distributed among three or more atoms, a partial pi bond results. Two parallel lines—one solid and one dashed—like a typical double bond are used to represent a partial double bond. A partial triple bond can result from a partial pi bond as well.

Due to the unequal distribution of electrons in bonds, partial charges differ from negatively charged ions, whereas total negative charges are caused by an excess of electrons in comparison to protons.

Therefore, Partial bonding, for example, as part of a resonance hybrid, often results in structures with fractional bond orders.

To learn more about Partial bonding

Here: https://brainly.com/question/29479603

#SPJ4

option b. is correct Only I and II are true

A Lewis structure is a structural representation of a molecule in which dots represent electron locations surrounding the atoms and lines/dot pairs represent covalent interactions between atoms. For any covalently bound molecule or coordination complex, a Lewis structure can be drawn. As a result, the proper statements in this problem are:

I. The formal charge on all atoms should be zero, or as close to zero as possible.

II. The charge on the molecule or ion should be equal to the sum of the formal charges on all the atoms.

Only options e. I and II are available.

To learn more about representation please click on below link

https://brainly.com/question/27987112

#SPJ4

45.1 ml of 0.104 mm hcl solution is needed to neutralize a solution of koh , 0.294 grams of koh must be present in the solution

MHCl*VHCl = MKOH*VKOH = moles of KOH

moles of KOH = 0.116 M x (45.2/1000) L = 5.24 x 10^-3 mol

molar mass of KOH = 56.1 g/mol

mass of KOH = molar mass x moles = 56.1 x 5.24 x 10^-3 = 0.294 g

learn more about HCL here:

https://brainly.com/question/13016495

#SPJ4

(a) -  1.39 atm is the partial pressure of the hydrogen gas in the sample

(b) -  0.219 g many grams of aluminum must have reached to produce this quantity of hydrogen gas.

According to Dalton's Law, often known as the Legislation of Partial Pressures, the combined pressure of a mix of gas is equal to the product of their individual partial pressures.

(a)The partial pressure of hydrogen gas and the vapour pressure of water are added to determine the total pressure of the gas mixture.

PT = Pw + PH

Water has a vapour pressure of atm.

Pw = (30.75 torr)(1.00 atm) / 760 torr

Pw = 0.0405 atm

The hydrogen gas pressure is

PH = PT - Pw

PH = 1.44 atm - 0.0405 atm

PH = 1.39 atm

(b) The amount of hydrogen gas in moles is

n = PV / RT

n = (1.39 atm) (0.2384 L)  / 0.82057 atm L / mol K (302.6 K)

n=0.0122 mol

Aluminum metal and hydrogen gas have a 3:2 molar ratio. The required amount of aluminum metal in moles is

n=0.0122 mol * 2 / 3

n = 0.00813 mol

Aluminum has a molar mass of 26.981538 g/mol. The quantity of aluminum needed is

m = 0.00813 * 26.981538 g/mol

m = 0.219 g

To know more about Partial pressure visit:

https://brainly.com/question/15075781

#SPJ4

The complete question is -

Hydrogen gas is produced by the reaction between metallic aluminum and aqueous hydrochloric acid. 2al(s) 6hcl(aq)⟶2alcl3(aq) 3h2(g)

(a)the hydrogen gas produced by this reaction is typically collected via water displacement. during this process, the hydrogen gas becomes saturated with water vapor. if 292.6 ml of gas with a total pressure of 1.44 atm is collected via water displacement at 29.4 ∘c , what is the partial pressure of the hydrogen gas in the sample?

(b)How many grams of aluminum must have reached to produce this quantity of hydrogen gas ? The vapor pressure of water at 29.4 ∘c is 30.75 torr.

If the mass of the magnesium oxide collected is 0.224 g then the 0.296g solid magnesium is Limiting reagent.

Magnesium is found naturally in the form of periclase, a white hygroscopic solid mineral known as magnesium oxide or magnesia. Its empirical formula is MgO, and it is made up of a lattice of Mg2+ and O2 ions that are kept together by ionic bonding. Different applications for magnesium oxide exist. As an antacid, some people take it to treat acid indigestion, sour stomach, and heartburn. For quick, short-term bowel emptying, magnesium oxide may also be used as a laxative.

A reactant that is completely consumed at the conclusion of a chemical reaction is known as the limiting reagent. The limiting reactant, also known as the limiting reagent, is the reactant that is used first in a chemical reaction, hence restricting the amount of product that can be produced.

learn more about magnesium oxide here

https://brainly.com/question/1533548

#SPJ4

The mole fraction of ethanol is 0.165

What do you mean by mole fraction ?

There are several ways to indicate the concentration of the solution and mole fraction is one of them. Mole fraction is a unit of concentration. In the solution, the relative amount of solute and solvents are measured by the mole fraction and it is represented by “X.”

The mole fraction is the number of moles of a specific component in the solution divided by the total number of moles in the given solution.

Molecular Mass of Ethanol = 46g

11.0 molal = 11 moles in 1 L solution

Molecular mass of water = 18g

Density of water= 1kg/m3 = 1000g/l

So, Mass of water in 1l solution = 1000g

so moles = 1000/18 = 55.55 moles

Thus, mole fraction of ethanol = 11.0/ ( 11.0 + 55.6 ) = 0.165

To know more about mole fraction from the given link:
https://brainly.com/question/14783710
#SPJ4

The factors that play the role in success is solvent, concentration of nucleophile and the substrate.

What is [tex]S_{N}2[/tex] reaction ?

When [tex]sp^{3}[/tex] hybridized  carbon containing a leaving group and nucleophile attack from the remote side of the leaving group then the reaction is known as [tex]S_{N}2[/tex] reaction.

Factors depending on [tex]S_{N}2[/tex] reaction:

Read more about [tex]S_{N}2[/tex] reaction:

https://brainly.com/question/10143438

#SPJ4

The compound will show pentagonal pyramidal structure.

This is because the one axial plane is occupied by the lone pair of electrons obeying the bent's rule . And the other 4 bond pairs are present in both equatorial and the axial position. Since a lone pair of electrons are present they represent pentagonal bipyramidal structure to pentagonal pyramidal structure.

Learn more about molecular geometry here brainly.com/question/12779877

#SPJ4

The independent variable, the one that is intentionally manipulated between the two samples, is the mass of the each sample. there is also another variable that is manipulated This independent variable is the type of material used.  In each case, the dependent variable, temperature.

Two dry sand sample are examined by changing one parameter. so, the independent variable, the one that is intentially changed between two samples is the mass of the each sample.

Besides the amount of material, there is also another variable that is manipulated within each of the two mass groups and represented as three types. This independent variable is the type of the material used.

In each case, the dependent variable, the one that you measure the response in, is the temperature over the time.

To learn more about independent variable here

https://brainly.com/question/10344132

#SPJ4

Answer:

a. mass of each sample

b. type of material used

c. temperature over time

Explanation:

edge 2022!! i got it right ;)

The water of 17.99 g forms when 63g of HNO₃ mixes with60g of NaOH

When nitric acid and sodium hydroxide are mixed, a neutralization reaction takes place, with the salt created by the two substances and water serving as the reaction result. The chemical reaction to the statement in this instance is:

HNO₃ + Na(OH) ⇒ NaNO₃ + H₂O

It is determined whether there is one limiting reagent and one in excess, or if both react entirely, by calculating the molar masses of the reagents and using the masses provided by the statement to compute the ratio in which these compounds are combined.

• The formula for HNO₃'s molar mass is 3xmO + mH + mN, or 3x15.99g + 1g + 14g = 62.97 g/mol.

• The formula for Na(OHmolar )'s mass is: mO + mH + mNa = 15.99g + 1.00g + 22.99g = 39.98 g / mol.

Nitric acid is immediately apparent to be the limiting reagent.

Since there are initially 60 g of hydroxide, some of it will stay unreacted because the balanced equation's stoichiometric ratio states that 1 mole of acid reacts with 1 mole of hydroxide. As a result, 63 g of HNO3 react with 40 g of hydroxide. This proves that acid is the limiting reagent, and calculations to determine how much water will form must be based on this substance.

For 63g of HNO₃ 18g of water is formed. Then,

for 62.97 g of HNO₃,

= 18 g x 63 g equals/62.97 g  

= 17.99 g of water.

As a result, the correct response is that 17.99 g of water will form.

To know more about neutralization, click below:

https://brainly.com/question/23008798

#SPJ4

It is given that its a combustion reaction, we know that the ending compounds are CO2 and H2O alone.  To get this, we add O2 in a combustion reaction to our initial compound.

C8H18 + O2  --->  CO2 + H2O  ( + trace amounts of C8H18 left)  We are asked about the C8H18 left meaning we have a limiting reactant and it is not completely water and CO2 left due to the limiting reagent.  So we are trying to find the excess reactant.  

To balance the equation we must balance all molecules ;

2 C8H18 + 25 O2  --->  16 CO2  +  18 H2O   (not taking into account the combustion of air)

It is given that it is incomplete combustion so we must use the grams of product to calculate the amount of reactant used due to the limiting reagent

1.15 g H2O * ( 1 mol H2O / 18.01532 g H2O)  *( 2 mol C8H18 / 18 mol H2O) * ( 1 mol C8H18 / 114.24 g C8H18) = 0.00111755 = 0.00118 g C8H18  reacted

11.8 g C8H18 in the initial reaction,  0.0118 g reacted to get 1.15 g H2O

11.8-0.00118 = 11.79882 = 11.8 g C8H18 left in the balanced equation (meaning almost none of it was reacted)

Learn more about balance equation reaction ; https://brainly.com/question/11322377?referrer=searchResults

#SPJ4

Predict the mass of hydrogen fuel produced when 2. seventy-three g of aluminum reacts in a single replacement reaction with extra sulphuric acid.

The yank Chemical Society ACS officially followed aluminum in 1925, however in 1990 The International Union of Pure and implemented Chemistry IUPAC regularly occurring aluminum as a worldwide fashionable. And so we land today: with aluminum used by the English speakers of North us, and aluminum used anywhere else.

The most comforting part of this tale is that both Aluminum and Aluminium are conventional and correct. Aluminum is preferred in North the us, while Aluminium is the spelling favored within the united kingdom and most different English-talking countries.

Learn more about aluminum here:-https://brainly.com/question/11952150

3SPJ4

• Al --> Al3+ is an oxidation and 3 electrons on right side are needed.

Cu2+ --> Cu is a reduction and 2 electrons on left side are needed.

• 2 F- --> F₂ is an oxidation and 2 electrons on right side are needed.

In redox reaction, we can identify 2 kinds of half-reactions:

Let's consider following half-reactions.

• AI⇒ Al 3+

This is an oxidation because oxidation number increases from 0 to 3+. To balance it, we need 3 electrons on the right side.

Cu²+⇒ Cu

This is a reduction because oxidation number decreases from 2+ to 0. To balance it, we need 2 electrons on the right side.

• 2 F- ⇒ F₂

This is an oxidation because oxidation number increases from -1 to 0. To balance it, we need 2 electrons on the right side.

Al --> Al3+ is an oxidation and 3 electrons on the right side are needed.

Cu2+ --> Cu is a reduction and 2 electrons on the left side are needed.

2 F- ---> F2 is an oxidation and 2 electrons on the right side are needed.

learn more about redox reaction at

https://brainly.com/question/21851295

#SPJ4

The most accurate statement to explain the phenomena would be that the enthalpy change being positive means that the reaction is endothermic.

Endothermic reactions are reactions in which the energy level of the reactants is lower than the energy level of the products of the reaction. In other words, exothermic reactions take energy from the surroundings rather than releasing energy to the surroundings.

Reactions that release energy to the surroundings are otherwise known as exothermic reactions. Here, the reactants are usually at a higher energy level than the products.

When it comes to enthalpy change, since endothermic reactions consume energy from the surroundings and the products are usually at a higher energy level, the enthalpy change is positive.

This is unlike exothermic reactions in which the enthalpy change is negative because heat is released into the surroundings instead.

Thus, the dissolution of ammonium nitrate in water is said to be endothermic because the enthalpy change is positive.

More on endothermic reactions can be found here: https://brainly.com/question/23184814

#SPJ1

A molecule's formal charge is the total of the formal charges of each of the constituent atoms that make up that particular molecule.

What is the Lewis structural rule?

Hydrogen atoms can only make one bond, and they are always located at the ends of atom chains. Hydrogen is usually associated with carbon, nitrogen, or oxygen. Oxygen atoms normally do not bond to one another, with the exception of O2, O3, superoxides, and peroxides.

Describe Lewis's structure with an example.

The octet rule, which states that atoms share electrons so that each has eight in its outer shell, is the foundation of a Lewis structure. For instance, the outer shell of an oxygen atom has six electrons.

To know more about lewis struture visit:

https://brainly.com/question/12476602

#SPJ4

Sodium, oxygen, with phosphorus combine to generate the monoatomic substances Na2O (sodium oxide), Na3P (sodium phosphide), Na3PO3 (sodium phosphite), and Na3PO4 (sodium phosphate).

All tissues and cells require phosphorus for their growth, upkeep, and repair, as well as for the creation of DNA or RNA, the genetic building blocks. Additionally, other minerals and vitamins like vitamin D, thyroid, magnesium, and zinc need phosphorus to be balanced and used.

Extra phosphorus alters the body in ways that cause calcium to be drawn from your bones, weakening them. Additionally, harmful calcium deposits in the heart, lungs, eyes, and blood vessels are caused by elevated phosphorus and calcium levels. With time

To know more about phosphorus visit:

brainly.com/question/4622631

#SPJ4

At 102°C - 106°C tetra-n-butylammonium bromide, tbab, is removed from the reaction mixture.

Facts about tetra-n-butylammonium bromide or TBAB

Learn more about TBAB from the link given below.

https://brainly.com/question/28382535

#SPJ4

The monosaccharides to build each of the disaccharides are:

Glucose + fructose = sucrose

Galactose + glucose = lactose

glucose + glucose = maltose

What are monosaccharides examples?

The simplest carbohydrates, also called simple sugars, are plentiful in fruits. A monosaccharide is a carbohydrate consisting of one sugar unit.

What are the 4 monosaccharides?

Glucose is the most abundant monosaccharide. Galactose, mannose, fructose, and ribose are also of major biological importance.

What are the 3 disaccharides?

Disaccharides consist of two monosaccharide units, linked together with glycosidic bonds in the α or β orientation. The most important of them are sucrose, lactose, and maltose.

What are disaccharides and their functions?

Disaccharides act as an energy source for the body, just like any other carbohydrate. When we eat foods that contain disaccharides, our bodies break them down into simple sugars (monosaccharides) for absorption in the small intestine.

To know more about monosaccharides and disaccharides:

https://brainly.com/question/731310

#SPJ4

The partial pressure of each gas in the mixture is 39.75 mm of hg and 179.43 mm of hg respectively.

In a combination of gases, each constituent fuel has a partial stress that is the notional strain of that constituent gas as if it alone occupied the whole volume of the original aggregate on the same temperature.

Calculation:-

Total pressure pressure = 798 mm hg

mass of neon gas = 3.93

   molar mass = 20 g

moles = 3.93/20

           = 0.1965 moles

mass of neon gas = 0.228 grams

   molar mass = 4 g

moles = 0.228 / 4

           = 0.057 moles

total moles = 0.2535

partial pressure of neon = moles of neon / total moles × total pressure

                                        = 0.1965 moles/ 0.2535 ×  798 mm hg

                                        = 39.75 mm of hg

partial pressure of helium = moles of helium / total moles × total pressure

                                        =0.057 moles / 0.2535 ×  798 mm hg

                                        = 179.43 mm of hg

The stress exerted by means of an person gasoline in a mixture is called its partial pressure. Assuming we've a combination of perfect gases, we are able to use the suitable gasoline regulation to solve problems concerning gases in a combination.The term partial stress is used whilst we've got a combination of two or numerous gases inside the identical extent, and it expresses the strain this is caused by every of the induvidual gases inside the mixture.

Learn more about partial pressure here:-https://brainly.com/question/14119417

#SPJ4

The discrete interactions in a system are conceptually represented by finite state machines (FSM) and petri nets (PN).

        C4H8

To learn more about Microsoft word document refer to:

brainly.com/question/27148473

#SPJ1

The pressure and the internal energy of the refrigerant at the final state

Known data:80.74kJ/kg.

[tex]$$\begin{aligned}& \mathrm{R}-134 \mathrm{a} \\& P_1=800 \mathrm{kPa} \\& T_1=25^{\circ} \mathrm{C}\end{aligned}$$[/tex]

Unknowns:

[tex]$$\begin{aligned}& T_2=? \\& u_2=?\end{aligned}$$[/tex]

The pressure of the refrigerant in the final state is equal to the saturation pressure at -20 degrees Celsius.

[tex]$$\begin{aligned}& P_2=P_{\text {sat }, \text { at }-20^{\circ} \mathrm{C}}=132.82 \mathrm{kPa} \\& P_2=132.82 \mathrm{kPa}\end{aligned}$$[/tex]

State 1 is compressed liquid. Then the enthalpy is that of the saturated liquid at 25 degrees Celsius.

[tex]\h_1=h_{f, \text { at } 25^{\circ} \mathrm{C}}=86.405 \mathrm{~kJ} / \mathrm{kg}$$[/tex]

The throttling process of the refrigerant is isentalpic. The state 2 of the refrigerant is in the phase mixing region, so we have to calculate the quality 2.

[tex]x_2=\left(h_2-h_f\right) /\left(h_g-h_f\right)$$[/tex]

Where:

[tex]$$\begin{aligned}h_2 & =h_1=86.405 \mathrm{~kJ} / \mathrm{kg} \\h_f & =25.49 \mathrm{~kJ} / \mathrm{kg} \\h_g & =238.4 \mathrm{~kJ} / \mathrm{kg}\end{aligned}$$[/tex][tex]$$\begin{aligned}h_2 & =h_1=86.405 \mathrm{~kJ} / \mathrm{kg} \\h_f & =25.49 \mathrm{~kJ} / \mathrm{kg} \\h_g & =238.4 \mathrm{~kJ} / \mathrm{kg}\end{aligned}$$[/tex]

Substituting:

[tex]x_2=(86.405-25.49) /(238.4-25.49)=0.2861$$[/tex]

Now let's calculate the final internal energy of the refrigerant, remembering that the temperature is -[tex]$20 \mathrm{C}$[/tex].

[tex]u_2=u_f+x_2\left(u_g-u_f\right)$$[/tex]

Where :

[tex]$$\begin{aligned}& u_f=25.39 \mathrm{~kJ} / \mathrm{kg} \\& u_g=218.34 \mathrm{~kJ} / \mathrm{kg}\end{aligned}$$[/tex]

Substituting :

[tex]$$u_2=25.39+0.2861(218.84-25.39)=80.74 k J / k g$$[/tex]

[tex]$$u_2=80.74 \mathrm{~kJ} / \mathrm{kg}$$[/tex]

To learn more about internal energy  visit:https://brainly.com/question/11278589

#SPJ4

Step 1: Calculate the molar mass of sodium bromate.

The molar mass of sodium bromate (NaBrO3) is 150.89 g/mol.

Step 2: Calculate the mass in grams of 4.68 mol of sodium bromate.

To calculate the mass in grams of 4.68 mol of sodium bromate, we need to multiply the molar mass of sodium bromate (150.89 g/mol) by the number of moles (4.68 mol):

Mass = Molar mass x Number of moles

Mass = 150.89 g/mol x 4.68 mol

Mass = 706.30 g

What is Sodium bromate?

Sodium bromate is an inorganic compound of sodium and bromate, with the formula NaBrO3. It is a white, odorless, crystalline solid. Sodium bromate is used as an oxidizing agent in a variety of industrial and laboratory processes. It is also used in bleaching and dyeing textiles, and in the manufacture of certain pharmaceuticals. Sodium bromate is toxic, and exposure can cause adverse effects on the skin, eyes, and respiratory system.

What are Ores?

Ores are rocks or minerals from which useful elements or minerals can be extracted. They usually contain significant concentrations of metals such as copper, iron, gold, lead, and zinc. Ores are extracted through mining and processed to obtain the valuable elements.

To know more about Sodium bromate and Ores,

LINK- https://brainly.com/question/161236

         https://brainly.com/question/89259

CODE- #SPJ4

The coefficients before Ni and H+ are 4 and 10 respectively.

A coefficient is an integer that is written or multiplied by a variable. A quantitative value multiplies variables and can change depending on other variables or covariates. Function coefficients are different from other coefficients in that they are constant across all entities or participants, while others can vary.

Coefficients are multiplicative coefficients in terms of a polynomial series, or expression. Usually numeric, but can be any expression. If the coefficients themselves are variables they can also be called parameters. Circle the variable with the power of the coefficient you found. Leave that variable and consider any other number or variable written to it. that will be the coefficient.

Learn more about A coefficient here:- https://brainly.com/question/2930011

#SPJ4

The amount of heat evolved by a reaction is, 53.84 kJ

Heat released by the reaction = Heat absorbed by the calorimeter + Heat absorbed by the water

q = [q1 + q2]

q = [c1× ∆T]+[m2×c2×∆T]

where,

q = heat released by the reaction

q1 = heat absorbed by the calorimeter

q2 = heat absorbed by the water

c1 = specific heat of calorimeter = 600 j/g°c

c2 = specific heat of water = 4.184 j/g°c

m2 = mass of water = 500 g

∆T = change in temperature = 20°c

Now put all the given values in the above formula, we get:

q = (600×20) + (500×4.184×20)

q = 12000 + 41840

q = 53840 J

q = 53.84 kJ

Therefore, the amount of heat evolved by a reaction is, 53.84 kJ

To learn more about heat visit here ; https://brainly.com/question/13220736?referrer=searchResults

#SPJ4