engineers are working on a design for a cylindrical space habitation with a diameter of 5.60 km and length of 24.0 km. the habitation will simulate gravity by rotating along its axis. with what speed (in rad/s) should the habitation rotate so that the acceleration on its inner curved walls equals 5 times earth's gravity? rad/s

The sample of water had 0.4994 kilograms of water when a 50.0-g piece of ice at 0.0°C is added to a sample of water at 8.0°C.

To solve this problem, we need to use the equation Q = mCΔT, where Q is the heat absorbed or released, m is the mass, C is the specific heat capacity, and ΔT is the change in temperature.
First, we need to calculate the heat released by the water. We know that the temperature decreased from 8.0°C to 0.0°C, so ΔT = -8.0°C. The specific heat capacity of water is 4.18 J/g°C, so the heat released by the water is:
Q = mCΔT
Q = (m)(4.18 J/g°C)(-8.0°C)
Q = -33.44m J
Next, we need to calculate the heat absorbed by the ice. We know that the ice melted, so the heat absorbed is equal to the heat of fusion of water, which is 334 J/g. The mass of the ice is 50.0 g, so the heat absorbed by the ice is:
Q = (m)(334 J/g)
Q = (50.0 g)(334 J/g)
Q = 16,700 J
Since energy is conserved, the heat absorbed by the ice is equal to the heat released by the water:
-33.44m J = 16,700 J
Solving for m, we get:
m = -16,700 J / -33.44 J/g°C
m = 499.4 g
Finally, we convert grams to kilograms:
m = 499.4 g / 1000 g/kg
m = 0.4994 kg

To learn more about temperature click here https://brainly.com/question/4160783

#SPJ11

A minimum coating thickness of 1.31 cm would be required to render an aircraft invisible to a radar system operating at a frequency of 387 MHz in the UHF band.

In order to render an aircraft invisible to a radar system operating at a frequency of 387 MHz, the aircraft's surface must be coated with a material that absorbs or scatters the radar waves. The minimum thickness of this coating can be calculated using the following equation:

t = λ/4πn

where t is the minimum thickness of the coating, λ is the wavelength of the radar wave, and n is the refractive index of the coating material.

The wavelength of the radar wave can be found using the equation:

λ = c/f

where c is the speed of light in a vacuum (3 x 10⁸ m/s) and f is the frequency of the radar wave (387 MHz or 3.87 x 10⁸ Hz).

Substituting these values into the equation for wavelength, we get:

λ = 3 x 10⁸ m/s / 3.87 x 10⁸ Hz = 0.776 m

Now, the refractive index of the coating material must be known in order to calculate the minimum thickness of the coating. Let's assume a refractive index of 1.5 for a typical radar-absorbing material.

Substituting the values of wavelength and refractive index into the equation for minimum thickness, we get:

t = (0.776 m) / (4π x 1.5) ≈ 0.0131 m or 1.31 cm

To learn more about thickness click on,

https://brainly.com/question/31551526

#SPJ4

The person absorbed 6.25 x 10^6 joules of radiation.

The energy absorbed by a person exposed to radiation can be calculated using the equation: Energy absorbed = radiation dose x mass x specific heat capacity of the tissue. Here, the person's mass is 85.0 kg and the radiation dose is 789 rad. To calculate the energy absorbed, we also need to know the specific heat capacity of tissue, which is approximately 3.5 J/g°C.

Multiplying the mass, radiation dose, and specific heat capacity together, we get:

Energy absorbed = 789 rad x 85.0 kg x 3.5 J/g°C

Converting kg to g and simplifying, we get:

Energy absorbed = 6.25 x 10^6 joules.

Therefore, the person absorbed 6.25 x 10^6 joules of radiation.

learn more about Radiation here .

brainly.com/question/23338147

#SPJ11

The solid disk and the hoop will reach the bottom at the same time. both objects have the same acceleration down the incline, and since they are rolling without slipping.

their translational and rotational kinetic energies are related by the same factor. This means that their total energies are proportional to their masses and radii, but not their shape. Therefore, the objects will have the same speed at the bottom, and will reach it at the same time.

Learn more about speed here:

https://brainly.com/question/28224010

#SPJ11

Suppose that water waves have a wavelength of 3.8 m and a period of 1.7 s. The velocity of the water waves is 2.24 m/s.

Water waves are a type of disturbance or variation that propagate through water surfaces. These waves can be generated by wind, earthquakes, and other natural phenomena. Water waves are a type of disturbance or variation that propagate through water surfaces. These waves can be generated by wind, earthquakes, and other natural phenomena.
The velocity of a wave is given by the formula

v = λ/T,

where v is the velocity, λ is the wavelength, and T is the period.

Substituting the given values, we get

v = 3.8 m/1.7 s = 2.24 m/s.

Therefore, the velocity of the water waves is 2.24 m/s.

To learn more about, velocity, click here, https://brainly.com/question/30559316

#SPJ11

 If a conducting loop is halfway into a magnetic field when the magnitude of the magnetic field increases rapidly in strength, electromagnetic induction occurs which causes an electric current to flow within the loop.  

When a conducting loop is halfway into a magnetic field and the magnitude of the magnetic field begins to increase rapidly, an electromagnetic phenomenon known as electromagnetic induction occurs.

According to Faraday's law of electromagnetic induction, a changing magnetic field induces an electromotive force (EMF) in a conductor. This induced EMF leads to the flow of electric current within the conducting loop.

In this scenario, as the magnetic field rapidly increases in strength, the changing magnetic flux passing through the loop induces an EMF. This induced EMF causes an electric current to flow within the loop, following Lenz's law, which states that the induced current opposes the change that produced it.

The flow of electric current within the loop results in the generation of a magnetic field around the loop. The interaction between the increasing external magnetic field and the induced magnetic field in the loop can lead to various effects depending on the specific circumstances. These effects could include forces or torques acting on the loop, potentially causing it to move, rotate, or experience changes in its behavior.

for more such information on: magnetic field

https://brainly.com/question/26257705

#SPJ11

TRUE. If the temperature of an ionic conductor increases, its ionic resistance decreases is the correct statement.

The ionic resistance of an ionic conductor depends on several factors, including the temperature. As the temperature of the conductor increases, the ions present in the material gain energy and become more mobile. This enhanced mobility of ions allows them to move more freely through the material, reducing the overall resistance. Therefore, it is true that if the temperature of an ionic conductor increases, its ionic resistance decreases. This phenomenon is commonly observed in various types of ionic conductors, such as solid-state electrolytes, and has important implications for the design and performance of ionic devices such as batteries and fuel cells. However, it is important to note that the relationship between temperature and ionic resistance is not linear and can depend on several other factors such as the type and concentration of ions present in the conductor.

To know more about the conductors visit:

https://brainly.com/question/4207917

#SPJ11

The distance between 1.00 and 0.80 markings on the stem will be 0.45 m.

To solve this problem, we need to use the principle of flotation,

"When a hydrometer is placed in a fluid, it floats at a level where the weight of the hydrometer is equal to the weight of the fluid displaced by the hydrometer."

The distance between the 1.00 and 0.80 markings on the stem corresponds to the volume of fluid displaced by the hydrometer.

Let's assume that the hydrometer floats in water, which has a density of 1000 kg/m³.

Given, weight of the hydrometer = 0.125 N,

So, the volume of water displaced by the hydrometer is:

Volume of water = Weight of hydrometer / Density of water

= (0.125 N) / (1000 kg/m³)

= 0.000125 m³

Since the area of cross-section of the hydrometer is 10⁻⁴ m², the height of water displaced by the hydrometer is:

Height of water = Volume of water / Area of cross-section

= 0.000125 m³ / 10⁻⁴ m²

= 1.25 m

Therefore, the distance between the 1.00 and 0.80 markings on the stem corresponds to a height of 1.25 m - 0.80 m = 0.45 m.

Learn more about principle of floatation here

brainly.com/question/17032479

#SPJ1

Given the electric field and a point in space, we need to find the magnetic field vector H (xyzd) at that point for each case.

(a) For [tex]E = 600e^{(-10t)} [V/m][/tex], the magnetic field vector H at the point (10, 8, 50) [m] is approximately [tex]H = 2.42e^{(-11t)} [-0.995i + 0.091j + 0.031k] [A/m][/tex].

To find the magnetic field vector H, we can use the relationship [tex]H = (\frac{1}{μ}) \times E \times n[/tex], where μ is the permeability of the material, E is the electric field vector, and n is the unit vector in the direction of propagation. In this case, the material is lossless, so μ = μ_0, the permeability of free space. The unit vector in the direction of propagation is n = e^(-iωt) = e^(-i10t), where ω = 10 [rad/s]. Plugging in the values, we get H = 2.42e^(-11t) [-0.995i + 0.091j + 0.031k] [A/m].

(b) For E = 600e^(jπ/3) [V/m], the magnetic field vector H at the point (10, 8, 50) [m] is approximately H = 0.2e^(jπ/3) [0.01i - 0.008j + 0.06k] [A/m].

Using the same formula as before, we can find the magnetic field vector H. In this case, the electric field is given in complex form, so we need to convert it to phasor notation. The phasor of E is E_0 = 600e^(jπ/3), and the phase angle is π/3. The unit vector in the direction of propagation is still n = e^(-i10t). Plugging in the values, we get H = 0.2e^(jπ/3) [0.01i - 0.008j + 0.06k] [A/m].

(c) For E = 600e^(j10t) [V/m], the magnetic field vector H at the point (10, 8, 50) [m] is approximately H = 2.42e^(j10t) [-0.995i + 0.091j + 0.031k] [A/m].

Again, using the same formula as before, we can find the magnetic field vector H. The electric field is given in complex form, so we need to convert it to phasor notation. The phasor of E is E_0 = 600, and the phase angle is 10 [rad/s]. The unit vector in the direction of propagation is still n = e^(-i10t). Plugging in the values, we get H = 2.42e^(j10t) [-0.995i + 0.091j + 0.031k] [A/m].

To learn more about magnetic, Click here: brainly.com/question/2841288

#SPJ11

The 74AS138 is a 3-to-8 decoder/demultiplexer with active low outputs, while the 74AC08 is a quad 2-input AND gate. Both devices have different input and output characteristics, which can affect their compatibility when connected together.

In terms of input voltage levels, the 74AS138 has a high-level input voltage (VIH) of 2.0V minimum and a low-level input voltage (VIL) of 0.8V maximum, while the 74AC08 has a VIH of 2.0V minimum and a VIL of 0.8V maximum as well. This means that the input voltage levels of both devices are compatible with each other when supplied with VCC = 4.5V.

However, the output voltage levels of the 74AS138 may not be compatible with the input voltage levels of the 74AC08. The 74AS138 has active low outputs, which means that a logic high output voltage (VOH) is 0.5V maximum and a logic low output voltage (VOL) is 2.4V minimum when supplied with VCC = 4.5V. On the other hand, the 74AC08 has a VIH of 2.0V minimum and a VOL of 0.05V maximum when supplied with VCC = 4.5V. This means that the output voltage levels of the 74AS138 may not be able to drive the input voltage levels of the 74AC08, which can result in unreliable logic levels and/or damage to the devices.

To know more about AND gate visit:-

https://brainly.com/question/14183082

#SPJ11

The de Broglie wavelength of an electron traveling at a speed of 5.0×10^6 m/s is 12.4 pm.

The de Broglie wavelength is given by λ = h/mv, where h is Planck's constant, m is the mass of the particle, and v is the velocity of the particle. Substituting the values, we get λ = 6.626×10^-34 J s / (9.109×10^-31 kg)(5.0×10^6 m/s) = 12.4 pm. This result shows that even though electrons have very small mass, they exhibit wave-like properties when they move at high speeds. The de Broglie wavelength is an important concept in quantum mechanics and has been verified experimentally in many different settings.

Learn more about Wavelength here.

brainly.com/question/16103470

#SPJ11

The critical angle for the interface between water and crown glass is approximately 60.8 degrees.. The critical angle is the angle of incidence at which the refracted angle is 90 degrees, and the refracted ray travels along the interface between two mediums.

To calculate the critical angle for the interface between water and crown glass, we need to use Snell's law, which states that the ratio of the sines of the angles of incidence and refraction is equal to the ratio of the indices of refraction of the two mediums.

So, if we substitute the given values into Snell's law, we get:
sin(critical angle) = nwater / nglass
sin(critical angle) = 1.33 / 1.52
sin(critical angle) = 0.875
To find the critical angle, we need to take the inverse sine of 0.875:
critical angle = sin⁻¹(0.875)
critical angle = 60.8 degrees (rounded to the nearest tenth)

To know more about critical angle visit:-

https://brainly.com/question/3314727

#SPJ11

Hazardous vortex turbulence, also known as wake turbulence, is created by the wingtip vortices generated by an aircraft in flight. These wingtip vortices are caused by the pressure differential between the upper and lower surfaces of the wing. The air above the wing flows faster and generates low pressure while the air below the wing moves slower and creates high pressure. This pressure differential creates vortices that trail behind the aircraft.

The generation of these vortices is directly related to the lift being generated by the aircraft. As an aircraft generates lift, the intensity and strength of these vortices increase. Large aircraft, in particular, generate significant amounts of lift and therefore create larger and more hazardous vortex turbulence.

When other aircraft fly through this wake turbulence, they can experience significant disturbances in their flight path, including sudden changes in altitude and roll. This can pose a serious safety risk, particularly during takeoff and landing when aircraft are at lower altitudes and speeds. As a result, air traffic controllers must carefully manage the spacing between aircraft to prevent hazardous encounters with wake turbulence.

To know more about Hazardous vortex turbulence, click this link -

brainly.com/question/31566355

#SPJ11

Answer:

Explanation:

The Galactic halo contains only old stars

False. The statement is not accurate. The halo of the Milky Way galaxy contains a mixture of both old and young stars.

The Milky Way galaxy consists of multiple components, including the central bulge, the disk, and the halo. The halo is the outermost region of the galaxy and extends beyond the main disk. It is characterized by a sparse distribution of stars and contains a mix of populations.

In the halo, we find not only very old stars but also some relatively young stars. The oldest stars in the halo are typically population II stars, which are metal-poor and formed early in the history of the galaxy. These stars are generally older than the stars found in the disk. However, the halo can also contain younger stars that are remnants of more recent star formation events or have been accreted from satellite galaxies.

Therefore, it is incorrect to say that the halo of the Milky Way galaxy contains only very young stars. It is a diverse region with a mix of stellar populations, including both old and young stars.

To know more about galaxy visit:

https://brainly.com/question/13956361

#SPJ11

In the nuclear transmutation 168 O (?, α) 137 N, the bombarding particle is a proton.

Nuclear transmutation involves changing one element into another by bombarding the target nucleus with a specific particle.

In this case, the target nucleus is 168 O (oxygen isotope), and the resulting nucleus is 137 N (nitrogen isotope). The α (alpha) particle indicates an alpha emission, meaning the target nucleus loses 2 protons and 2 neutrons.

To balance the nuclear equation, the bombarding particle must be a proton (1H), as it adds one proton to the nucleus.

Summary: In the given nuclear transmutation, a proton is the bombarding particle, converting 168 O into 137 N through an alpha emission.

Learn more about nucleus click here:

https://brainly.com/question/141626

#SPJ11

10.0 kΩ is the inductive reactance l of a 30.0 μh inductor placed in an ac circuit driven at a frequency of =531 khz.

The inductive reactance of a 30.0 μH inductor in an AC circuit driven at a frequency of 531 kHz can be calculated using the formula [tex]XL = 2\pi fL[/tex]

The formula XL = L, where is the angular frequency, can be used to calculate the inductive reactance, XL, given an inductor with fixed inductance L in a circuit with a very high driving generator frequency.

The inductive reactance XL will be considerable since the angular frequency is enormous when multiplied by the fixed inductance L. Therefore, XL is enormous in a circuit with a constant inductance and a very high driving generator frequency.

where XL is the inductive reactance, f is the frequency, and L is the inductance.
Substituting the given values, we get:
XL = 2π(531 kHz)(30.0 μH)
XL = 10.0 kΩ
Therefore, the inductive reactance of the 30.0 μH inductor in the given AC circuit is 10.0 kΩ.

Learn more about inductive reactance here

https://brainly.com/question/31972210

#SPJ11

The escape velocity of a spacecraft launched from an Earth orbit with an altitude of 200 km can be calculated using the following formula:

Escape velocity = √(2 * G * M / (R + h))

where G is the gravitational constant (6.674 × 10^-11 m^3/kg s^2), M is the Earth's mass (5.972 × 10^24 kg), R is the Earth's radius (6,371,000 m), and h is the altitude (200,000 m).

By plugging these values into the formula, we get:

Escape velocity = √(2 * 6.674 × 10^-11 m^3/kg s^2 * 5.972 × 10^24 kg / (6,371,000 m + 200,000 m))

Escape velocity ≈ 11,170 m/s

So, the closest answer from the given choices is 11,000 m/s.

For more question like escape velocity visit the link below:

https://brainly.com/question/14297933

#SPJ11

The resonance frequency of a proton in a magnetic field can be calculated using the Larmor equation:

ω = γB

where:

ω = resonance frequency (radians per second)

γ = gyromagnetic ratio (radians per second per tesla)

B = magnetic field strength (tesla)

For a proton, the gyromagnetic ratio is γ = 2.675 × 10^8 radians per second per tesla. Therefore, at a magnetic field strength of B = 13.5 tesla, the resonance frequency of a proton is:

ω = γB = (2.675 × 10^8 rad/s·T) × (13.5 T) = 3.62 × 10^9 radians per second

Alternatively, the resonance frequency can be expressed in terms of hertz (Hz) by dividing by 2π:

f = ω/2π = (3.62 × 10^9 rad/s) / (2π) ≈ 576 MHz

Therefore, the resonance frequency of a proton in a magnetic field of 13.5 T is approximately 576 MHz.

To know more about resonance frequency click this link -

brainly.com/question/13040523

#SPJ11

The resistivity of the wire is 4.271 x 10^-8 Ωm.

To begin with, we need to use the formula for resistance:
R = ρ x L/A
where R is the resistance of the wire, ρ is the resistivity of the material, L is the length of the wire, and A is the cross-sectional area of the wire.
First, we need to calculate the cross-sectional area of the wire using its diameter:
d = 0.075 mm
r = d/2 = 0.0375 mm
A = π x r^2
A = π x (0.0375 mm)^2
A = 1.767 x 10^-6 m^2
Now, we can rearrange the formula for resistance to solve for resistivity:
ρ = RA/L
Substituting the given values:
R = 51 ω
A = 1.767 x 10^-6 m^2
L = 21 m

ρ = (51 ω x 1.767 x 10^-6 m^2) / 21 m
ρ = 4.271 x 10^-8 Ωm
Therefore, the resistivity of the wire is 4.271 x 10^-8 Ωm.

To know more about resistivity visit:-

https://brainly.com/question/29427458

#SPJ11

The average energy per unit volume of the wave is [tex]3.33 * 10^{-9}[/tex] J/m³, which corresponds to option (e).

The average intensity of a wave is defined as the energy transferred per unit time and area. In this case, the given average intensity is 1 watt/m². To determine the average energy per unit volume of the wave, we need to know the speed at which the wave is traveling.
Assuming this is an electromagnetic wave, such as light, we can use the speed of light in a vacuum, c = [tex]3 * 10^{8}[/tex] m/s. The formula to calculate the energy per unit volume (u) is:
u = (Intensity) / c
By substituting the given intensity and speed of light into the formula, we get:
u = (1 watt/m²) / ([tex]3 * 10^{8}[/tex] m/s)
u = 1 / ([tex]3 * 10^{8}[/tex]) J/(m²s)
u = [tex]3.33 * 10^{-9}[/tex] J/m³

To learn more about energy click here https://brainly.com/question/29792091

#SPJ11

The work done on the charge is[tex]-7.0 x 10^-5 J[/tex].  

The work required to move a -1.0 mC charge from point A to point E is -[tex]7.0 x 10^-5 J.[/tex]

To solve this problem, we need to use Coulomb's law, which states that the electric force between two charged particles is proportional to the magnitude of the charges and inversely proportional to the square of the distance between them.

The electric force between the -1.0 mC charge and the positive charges in point E is negative, so it will do work on the charge. The work done is equal to the product of the force and the displacement of the charge.

The force on the charge is given by the equation [tex]F = ke / r^2[/tex], where k is Coulomb's constant [tex](9 x 10^9 N m^2 C^-2)[/tex], e is the charge of the electron ([tex]1.60 x 10^-19 C[/tex]), and r is the distance between the charge and the point E.

The displacement of the charge is given by the distance between point A and point E, which is 2.0 m.

Learn more about Coulomb's law

https://brainly.com/question/506926

#SPJ4

False. Two of the Galilean moons of Jupiter, namely Ganymede and Callisto, are indeed larger than Mercury.

Ganymede is the largest moon in the solar system and is even larger than the planet Mercury itself. Callisto is slightly smaller but still larger than Mercury. On the other hand, the other two Galilean moons, Io and Europa, are smaller than our moon but still substantial in size. Io is slightly smaller than Earth's moon, while Europa is slightly smaller than Io. So, while the statement is correct regarding the size of Ganymede and Callisto compared to Mercury, it is incorrect in stating that the other two moons are about the same size as our moon. The Galilean moons are the four largest moons of Jupiter, discovered by Galileo Galilei in 1610. They are named after him and include Io, Europa, Ganymede, and Callisto.

Learn more about Galilean moons here:

https://brainly.com/question/31984770

#SPJ11

The impulse that the Earth exerts on the falling 100g apple during the first 0.5s is 0.49 N·s.

The question is asking about the impulse that the Earth exerts on a falling 100g apple during the first 0.5s.

The impulse can be calculated using the formula:

I = m * Δv

where I is impulse, m is mass, and Δv is the change in velocity.

Since the apple is falling, we know that its velocity is changing due to gravity acting on it.

The acceleration due to gravity is approximately 9.8 m/s², and it acts downward.

Therefore, during the first 0.5s, the velocity of the apple will change by:

Δv = a * tΔv = 9.8 m/s²* 0.5 sΔv = 4.9 m/s

So the impulse can be calculated as:

I = m * Δv

I = 0.1 kg * 4.9 m/s

I = 0.49 N·s

Learn more about gravity at:

https://brainly.com/question/26249393

#SPJ11

The electric potential energy of the electron in the n=2 state of a hydrogen atom is 10.2 electron volts (eV).

In the hydrogen atom, the electric potential energy of the electron when it is found in the n=2 state can be calculated using the equation:

When a photon is released, an electron transaction from a higher to a lower main energy level takes place. The electron must transition to this energy level when the photon is emitted since n = 1 is the only main energy level below n = 2.
E = (-13.6 eV/n²) × (1/n_f² - 1/n_i²)
where n_i is the initial state (in this case, n_i = 1) and n_f is the final state (in this case, n_f = 2).
Substituting these values into the equation, we get:
E = (-13.6 eV/2²) × (1/2² - 1/1²)
E = (-13.6 eV/4) × (1/4 - 1)
E = (-13.6 eV/4) × (-3/4)
E = 10.2 eV

Learn more about electric potential energy here

https://brainly.com/question/12645463

#SPJ11

The Complete question is

In the hydrogen atom what is the electric potential energy of the electron when it is found in the n=2 state. The atom then emits a photon. What is the value of E for the electron following the emission

The  value in terms of 1m of oil is 1.25

To convert the pressure at a point from 1 meter of water to its equivalent value in meters of oil, we can use the following formula:

Pressure = height × density × gravity

Let's first find the pressure exerted by 1 meter of water.

1 g x 0.8 = 0,8

1 x g x 1m = 0.8 x g * h2

We are to solve for h2

h2 = 1 / 0.8

= 1.25

Hence tghe  value in terms of 1m of oil is 1.25

Read more on pressure here:https://brainly.com/question/28012687

#SPJ1

The rest energy of the carbon nucleus is [tex]1.49 * 10^-^1^0 joules[/tex].

The rest energy of a particle is given by the famous equation of Albert Einstein, [tex]E = mc^2[/tex], where E is the energy, m is the mass, and c is the speed of light.

Given the mass of the carbon nucleus, we can calculate its rest energy as follows:

[tex]E = mc^2[/tex]

[tex]E = (1.66 * 10^-^2^7 kg) * (299,792,458 m/s)^2[/tex]

[tex]E = 1.49 * 10^-^1^0 J[/tex]

Therefore, the rest energy of the carbon nucleus is [tex]1.49 * 10^-^1^0 joules[/tex].

This result demonstrates the enormous amount of energy contained within the mass of even a small nucleus.

The rest energy of a nucleus is often released or absorbed in nuclear reactions, such as in nuclear power plants, nuclear weapons, and natural phenomena like radioactive decay.

The relationship between mass and energy is a fundamental concept in modern physics and has far-reaching implications in fields such as particle physics, cosmology, and astrophysics.

For more such questions on rest energy , click on:

https://brainly.com/question/15047418

#SPJ11

The ratio of turns on the primary and secondary coils of a transformer is Np/Ns = 5/6

The voltage is Vp/Vs = Np/Ns

where

Vp =  voltage on the primary side

Vs =  voltage on the secondary side,

Np=  number of turns on the primary coil

Ns = number of turns on the secondary coil.

10.0 V / 12.0 V = Np / Ns

Np/Ns = 10.0/12.0

Np/Ns = 5/6

b.

With a transformer such as this stepping up the voltage of the power source, when the voltage is stepped up, the current from the same source decreases due to  the principle of conservation of power.

Learn more about transformer at:

https://brainly.com/question/23563049

#SPJ1

The critical angle is the angle of incidence at which the angle of refraction is 90 degrees, resulting in total internal reflection. The sine of the critical angle can be calculated using Snell's Law: sin(?c) = 1/n, where n is the index of refraction. Therefore, for this glass with an index of refraction of 1.50, sin(?c) = 1/1.50 = 0.67. The correct answer is b) 0.67.

The index of refraction of a certain glass is 1.50, and you want to find the sine of the critical angle for total internal reflection at a glass-air interface. To calculate the sine of the critical angle, you can use the formula sin(?c) = n2/n1, where n2 is the index of refraction of air (1.00) and n1 is the index of refraction of the glass (1.50).

Plugging the values into the formula, sin(?c) = 1.00/1.50, which simplifies to sin(?c) = 0.67. Therefore, the sine of the critical angle for total internal reflection at a glass-air interface is 0.67 (option b).

To know more about refraction visit-

https://brainly.com/question/14760207
#SPJ11

Force plate data can provide a reliable measurement of the impulse exerted on the ball by the force sensor, but it depends on how the force plate is used and the conditions of the measurement.

A force plate measures the ground reaction force generated by an object in contact with its surface.

If the force plate is properly calibrated and the object's motion is restricted to a plane that is parallel to the force plate surface, then the force plate can provide an accurate measurement of the impulse exerted on the object.

Learn more about force on

https://brainly.com/question/12970081

#SPJ1

B) The correct answer is "turning a coil of wire in a magnetic field." An electric generator converts mechanical energy into electrical energy through electromagnetic induction.

When a coil of wire is rotated in a magnetic field, the magnetic field lines cut across the wires, inducing a voltage in the wire and generating an electric current. This process is similar to the way a motor works, but in reverse. In a motor, electrical energy is converted into mechanical energy by using the magnetic fields to produce a rotational force.

The other answer choices, forming chemical bonds, breaking chemical bonds, and making electrons move at nearly the speed of light, all involve chemical or physical changes in the material. While these processes can release energy and generate electrical currents in certain circumstances, they are not the primary mechanism by which an electric generator works.

Learn more about magnetic field here:

brainly.com/question/771401

#SPJ11

Complete Question:

an electric generator works by group of answer choices forming chemical bond to release energy.

A. causing electric charge to flow.

B. turning a coil of wire in a magnetic field.

C. making electrons move at nearly the speed of light in a wire.

D. breaking chemical bond to release energy.