From conservation of energy, the height he will reach when he has gravitational potential energy 250J is 0.42 meters approximately
The given weight of Elliot is 600 N
From conservation of energy, the total mechanical energy of Elliot must have been converted to elastic potential energy. Then, the elastic potential energy from the spring was later converted to maximum potential energy P.E of Elliot.
P.E = mgh
where mg = Weight = 600
To find the height Elliot will reach, substitute all necessary parameters into the equation above.
250 = 600h
Make h the subject of the formula
h = 250/600
h = 0.4167 meters
Therefore, the height he will reach when he has gravitational potential energy 250J is 0.42 meters approximately
Learn more about energy here: https://brainly.com/question/24116470
In an inelastic collision:
I. only momentum is conserved
II. only kinetic energy is conserved
III. momentum and kinetic energy are both conserved.
IV. neither momentum nor kinetic energy are conserved.
Hi there!
I. Only momentum is conserved.
An inelastic collision means that there is a LOSS in the KINETIC ENERGY of the system.
However, momentum is ALWAYS conserved for every type of collision unless there is an external force acting on the system.
a swimmer experiences a total (absolute) pressure of 117,500 pa in a pool. how far below the surface are they located?
Answer:
Explanation:
We know that the pressure can be calculated in the following way:
p = d·g·h
with d being the density of the water, g the gravitational acceleration and h the depth.
Also d of the water = 1000 kg/m^3 circa and g = 9.8 m/s^2 circa
117,500 Pa = 1000kg/m³ · 9.8m/s² · h
Therefore h = 11,9 m
What happens to all light bulbs in a series circuit when one burns out? How would the situation change when the lights are hooked up in parallel?
A diffraction grating is 1.50 cm wide and contains 2000 lines. When used with light of a certain wavelength, a third-order maximum is formed at an angle of 20.0°. What is the wavelength (in nm)?
Answer:
because of the gravity of the earth
A wave has frequency of 50 Hz and a wavelength of 10 m. What is the speed of the wave?
I need the Formula,Known,Substitute & Solve Answer with Units
Answer:
This is the answer that I got.
Explanation:
Hope it is right.
i. la protagonista ama a su gata. escribimos, en nuestros cuadernos , las razones por las que pensamos que las personas aman de manera exagerada a sus mascotas. Proponemos un antídoto para la soledad. Lo escribrimos
Las mascotas son una buena fuente de compañía y socias en la soledad.
La protagonista ama a su gato porque las mascotas son una buena fuente de compañía y es un antídoto para la soledad. Estas mascotas como perros, gatos, loros, etc. dan placer y felicidad a las personas.
La gente tiene mascotas para pasar tiempo con ellas y jugar con ellas para refrescar sus mentes. Tener mascotas es una actividad maravillosa que hace que nuestra mente esté relajada y llena de felicidad, por lo que podemos concluir que las mascotas son una buena fuente de compañía y compañera en la soledad.
Learn more about pest here: https://brainly.com/question/989131
Learn more: https://brainly.com/question/25948065
During which time does Jamal have the greatest momentum?
Answer:
Momentum Packet Answer KEY - Science Online
YOU WILL SEE THE PDF
Which of the following statements cannot be supported by Kepler's laws of planetary motion?
A planet's distance from the sun will not be the same in six months.
A planet's speed as it moves around the sun will not be the same in six months.
The rotational speed of the four smallest planets can be determined using the rotational speeds of the four largest planets and their orbital periods.
The average distance of Saturn can be calculated using the average distance of Neptune and the orbital period of both planets.
A rock is lying on a rock ledge that is 3 m high. The rock as 120 J of potential energy. What is the mass of the rock?
Have a great day!
[tex]\\ \sf\Rrightarrow PE=mgh[/tex]
[tex]\\ \sf\Rrightarrow m(10)(3)=120[/tex]
[tex]\\ \sf\Rrightarrow 30m=120[/tex]
[tex]\\ \sf\Rrightarrow m=4kg[/tex]
Mass=4kgBefore Collision:
2,000 kg 4 m/s 4,000kg 0 m/s
After collision: 2,000 kg + 4,000kg Vt = ?
I will give Brainliest to the first person. Please show work
Answer:
4/3 m/s
Explanation:
Assuming momentum is conserved, the sum of products of mass and speed before the collision is the same as after:
(2000 kg)(4 m/s) +(4000 kg)(0 m/s) = (2000 +4000 kg)(Vt)
Vt = (8000 kg·m/s)/(6000 kg) = 4/3 m/s
The speed of the combined objects after the collision is 4/3 m/s.
PLZ HELP ME FAST A relationship between two variables is called:
A.
observable
.B.
correlation
.C.
causation
D.
finite.
Answer:
B- Correlation
Explanation:
Answer:
correlation
Explanation:
what is the horse power of an electric motor which can do by 1250 joule of work in 5 seconds
Please HELP
6. A 3.4-kg bucket of water is attached to a 1.0-m rope. The bucket is swung in a circle at a speed
of 10.0-m/s.
a.
If the rope can only tolerate 400-N of force, what is the maximum speed the bucket can
experience before the rope snaps? {Hint: Let the centripetal force be 400-N and solve for the speed)
Answer:
Explanation:
hope this helps
The maximum speed of the bucket can experience before the rope snaps if A 3.4-kg bucket of water is attached to a 1.0-m rope. The bucket is swung in a circle at a speed of 10.0-m/s is 10.85 m / s.
What is force?Force is the influence of either pull or pushes in the body. Basically, gravitation forces, nuclear forces, and friction forces are the types of forces. For e.g. when the wall is hit by a hand then a force is exerted by the hand on the wall as well as the wall also exerts a force on the hand. There are different laws given to Newton to understand force.
Newton is a unit of force used by physicists that is part of the International System (SI). The force required to move a body weighing one kilogram one meter per second is known as a newton.
Given:
The mass of the bucket, m = 3.4 kg,
The length of the rope, r = 1 m,
The speed of the bucket, v = 10 m / s,
The force of the rope, F = 400 N,
Calculate the maximum speed by the formula given below,
[tex]F_c = mv^2 / r[/tex]
400 = 3.4 v² / 1
v² = 400 / 3.4
v² = 117.6
v = 10.85 m / s
Therefore, the maximum speed of the bucket can experience before the rope snaps if A 3.4-kg bucket of water is attached to a 1.0-m rope. The bucket is swung in a circle at a speed of 10.0-m/s is 10.85 m / s.
To know more about Force:
https://brainly.com/question/13191643
#SPJ2
If the mass of a substance having its volume 80 cm is 68 g. Calculate the density of the substance
[tex]\text{Given that,}\\\\\text{Mass}~ m = 68 ~\text{g} = 68 \times 10^{-3}~ \text{kg}\\\\\text{Volume}~ V = 80 ~ \text{cm}^3 = 80 \times 10^{-6}~ \text{m}^3 = 8\times 10^{-5}~ \text{m}^3\\\\\\\text{Density} ~\rho = \dfrac mV = \dfrac{68\times 10^{-3}}{8 \times 10^{-5}} = 8.5 \times 10^2 = 850 ~ \text{kg}~\text{m}^{-3}[/tex]
what's the mass of the star rasalas?
Answer: The Rasalas's solar mass is 1.50 times that of our star, the Sun. The Sun's Mass is 1,989,100,000,000,000,000,000 billion kg.
Explanation:
Answer:
The Rasalas's solar mass is 1.50 times that of our star, the Sun. The Sun's Mass is 1,989,100,000,000,000,000,000 billion kg. which to calculate using this website is too large. To give idea of size, the Sun is 99.86% the mass of the solar system.
Explanation:
When the mass of the cylinder increased from 3. 0 kg to 6. 0 kg, what happened to the amount of heat generated in the system? It decreased by a factor of 3. It decreased by a factor of 2. It increased by a factor of 2. It increased by a factor of 3.
When the mass of the cylinder increases from 3. 0 kg to 6. 0 kg, the amount of heat generated in the system increases by a factor of 2.
The given parameters:
Initial mass of the cylinder, m₁ = 3.0 kgFinal mass of the cylinder, m₂ = 6.0 kgThe amount of heat generated in the system is calculated as follows;
Q = mcΔT
where;
m is the massc is the specific heat capacityΔT is the change in temperatureIf we keep every other parameters constant and change the mass from 3.0 kg to 6.0 kg, the increase in the heat generated is calculated as follows;
[tex]Q_1 = 3c \Delta T\\\\Q_2 = 6c\Delta T\\\\Q_2 = 2(3c \Delta T)\\\\Q_2 = 2Q_1[/tex]
Thus, when the mass of the cylinder increases from 3. 0 kg to 6. 0 kg, the amount of heat generated in the system increases by a factor of 2.
Learn more about heat capacity here: https://brainly.com/question/16559442
an airplane flies with a constant speed of 620 miles per hour. how far can it travel in 3 1/2 hours?
Answer:
hi there !
1 hour -------> 620 miles
3 1/2 ---------> ?
the number of miles the airplane travels in 3 1/2 hours
= 3 1/2 × 620 = "2170" miles
please help me! i’ll mark brainliest if you’re correct!
The answer is that the resultant force is the vector sum of the component forces. In your simple example, where the component forces (F1 and F2) are at right angles to one another, as illustrated below, then the resultant force (r) is given by:
[tex]r= \sqrt{(f_{1}) {}^{2} +( f_{2})^{2} + 2f_{1}f_{2}. cos \: Θ, } \\ where \\ \: Θ, = angle \: between \: f_{1} \: and \: f_{2} \\ r = \sqrt{(2) {}^{2} + (5) {}^{2} + 2 \times 2 \times 5 \times cos90 } \\ \sqrt{4 + 25} = \sqrt{29} = 5.385 \\ nearest \: hundred = 5.39[/tex]
Answer: 3N to the right
Explanation: 2N- 5N= 3N
what led scientists to the discovery of the strong nuclear force?
Answer:
Explanation:
The concept of a new strong nuclear force was introduced. In 1935, the first theory for this new force was developed by the Japanese physicist Hideki Yukawa, who suggested that the nucleons would exchange particles between each other and this mechanism would create the force.
Look at the diagram of two trains. Calculate the relative speed.
Answer:speed difference
Explanation:
The Doppler technique for planet detection has found Earth-like planets around nearby Sun-like stars. (True or False) ____________________
Answer: false
Explanation:
why does the earth get more energy from the sun than from all the other stars in the universe combined
Answer:
Explanation:
The sun is much closer than the other stars
What type of heat does not require matter?
Radiation is the only method of heat transfer that does not require matter.
Facts about Radiation :
The energy from the sun is received in the form of radiation. It travels in the form of waves. It can be absorbed by substances in its path.Heat Radiation travels through air. Black surfaces are the emitters of heat radiation.Shiny surfaces are the reflectors of heat radiation.Heat transfer by Radiation doesn't require any medium.An instrument made of brass is an example of which of these?
solid–liquid solution
solid solution
liquid–liquid solution
gas–liquid solution
Answer:
a solid made of liquid solution
Explanation:
a trumpet for example has intrcuite valves , the only way to do this is by creating a liquid form of the metal to be able to create the solid formed instrument.
Answer:
a solid made of liquid solution
Explanation:
domne
what is the energy (in j) of a photon required to excite an electron from n = 2 to n = 8 in a he⁺ ion? submit an answer to three signficant figures.
Answer:
Approximately [tex]5.11 \times 10^{-19}\; {\rm J}[/tex].
Explanation:
Since the result needs to be accurate to three significant figures, keep at least four significant figures in the calculations.
Look up the Rydberg constant for hydrogen: [tex]R_{\text{H}} \approx 1.0968\times 10^{7}\; {\rm m^{-1}[/tex].
Look up the speed of light in vacuum: [tex]c \approx 2.9979 \times 10^{8}\; {\rm m \cdot s^{-1}}[/tex].
Look up Planck's constant: [tex]h \approx 6.6261 \times 10^{-34}\; {\rm J \cdot s}[/tex].
Apply the Rydberg formula to find the wavelength [tex]\lambda[/tex] (in vacuum) of the photon in question:
[tex]\begin{aligned}\frac{1}{\lambda} &= R_{\text{H}} \, \left(\frac{1}{{n_{1}}^{2}} - \frac{1}{{n_{2}}^{2}}\right)\end{aligned}[/tex].
The frequency of that photon would be:
[tex]\begin{aligned}f &= \frac{c}{\lambda}\end{aligned}[/tex].
Combine this expression with the Rydberg formula to find the frequency of this photon:
[tex]\begin{aligned}f &= \frac{c}{\lambda} \\ &= c\, \left(\frac{1}{\lambda}\right) \\ &= c\, \left(R_{\text{H}}\, \left(\frac{1}{{n_{1}}^{2}} - \frac{1}{{n_{2}}^{2}}\right)\right) \\ &\approx (2.9979 \times 10^{8}\; {\rm m \cdot s^{-1}}) \\ &\quad \times (1.0968 \times 10^{7}\; {\rm m^{-1}}) \times \left(\frac{1}{2^{2}} - \frac{1}{8^{2}}\right)\\ &\approx 7.7065 \times 10^{14}\; {\rm s^{-1}} \end{aligned}[/tex].
Apply the Einstein-Planck equation to find the energy of this photon:
[tex]\begin{aligned}E &= h\, f \\ &\approx (6.6261 \times 10^{-34}\; {\rm J \cdot s}) \times (7.7065 \times 10^{14}\; {\rm s^{-1}) \\ &\approx 5.11 \times 10^{-19}\; {\rm J}\end{aligned}[/tex].
(Rounded to three significant figures.)
A car takes off from rest takes of from rest and covers a distance of 80m on a straight road in 10s.Calculate the magnitude of its acceleration.
Answer:
The magnitude of its acceleration is 1.6 m/s^2.
Hope you could get an idea from here.
Doubt clarification - use comment section.
Define the following:
Potential energy
Kinetic energy
Mechanical energy
Chemical energy
Sound energy
Light energy
Nuclear energy
Answer
potential energy is the energy that is stored in an object due to its position relative to some zero position. An object possesses gravitational potential energy if it is positioned at a height above (or below) the zero height.
Kinetic energy is a form of energy that an object or a particle has by reason of its motion. ... Kinetic energy is a property of a moving object or particle and depends not only on its motion but also on its mass.
The energy of an object due to its motion or position; the sum of an object's kinetic energy and potential energy is called mechanical energy.
Energy stored in the bonds of chemical compounds. Chemical energy may be released during a chemical reaction, often in the form of heat; such reactions are called exothermic
Sound energy is defined as the movement of vibrations through matter. Sound energy is produced when an object vibrates, which results in noise. The sound vibrations cause waves of pressure that travel through a medium, such as air, water, wood, or metal.
Light energy is a kind of kinetic energy with the ability to make types of light visible to human eyes. Light is defined as a form of electromagnetic radiation emitted by hot objects like lasers, bulbs, and the sun. Light contains photons which are minute packets of energy.
Nuclear energy is energy in the nucleus (core) of an atom. ... It can be released from atoms in two ways: nuclear fusion and nuclear fission. In nuclear fusion, energy is released when atoms are combined or fused together to form a larger atom. This is how the sun produces energy.
I need it in the next hour or so!
A sports car with a mass of 650 kg is accelerating at +3 m/s2. The force of friction is 200 N, the forward force from the engine is 3100 N. What must the force of air resistance on the car be? - Show your work - Include a unit with your answer
The car is accelerating at 3 m/s² in the positive direction (to the right). By Newton's second law, the net force on the car in this direction is
∑ F = F[a] - F[f] - F[air] = ma
3100 N - 200 N - F[air] = (650 kg) (3 m/s²)
Solve for F[air] :
F[air] = 3100 N - 200 N - (650 kg) (3 m/s²)
F[air] = 3100 N - 200 N - 1950 N
F[air] = 950 N
hi my name is coolboy123hillok
Answer:
you should change that name
Which are the most likely products for the following reaction? Zn + CuSO4 --> ?
Answer:
It's going to be a single displacement reaction
So we'll get ZnSO4 + Cu for the following reaction Zn + CuSO4
Equation:
Zn + CuSO4 ------> Cu + ZnSO4