El ejemplo más claro para definir una cadena de electricidad es una red de pesca, si fuera posible identificar una sola partícula representativa de esta fuerza , ¿ Cuál partícula se identificaría? *

Bosón W

Fotón

Glúon

Leptón

Explanation:

Step one look for the longest chain of carbon atoms

Longest chain is 7 C atoms

Step 2 look for double bonds or others functional groups

it is present in 3rd carbon

Therefore IUPAC name is 3-heptene

From point of stereochemistry it can also be written as trans-3-heptene as the hydrogens are placed in opposite side of the C=C bond.

Hope this helps...

The compound name is: trans 3-heptene

Molecular compounds are inorganic compounds that take the form of discrete molecules.

Looking at the given compound:

1. We need to look for the highest carbon chain, So in this compound the highest carbon chain is of 7 carbon atoms.

2. This compound also has a double bond in between that is present at the third carbon which can be detected by numbering the carbon in a order where the lowest number will come over a double bond.

3. Lastly, we can derive the name for this compound as hept-3-ene or 3-heptene.

4. Also, there is one more thing to notice here which is the position of two hydrogen that are present as substituents since they are placed opposite to each other thus we can name it as trans 3-heptene.

Thus, the compound name is: trans 3-heptene.

Find more information about Compound here:

brainly.com/question/1603500

Answer:

The calculated concentration of acid will be higher than the actual concentration of acid

Explanation:

We have information that all enable us to calculate the concentration of KOH in the solution. From the question, we have;

Mass of KOH= 14.555g

Molar mass of KOH= 56.1056 g/mol

Volume of solution= 500 ml

Number of moles of KOH= ???

From;

m/M= CV

m= mass of KOH

M= molar mass of KOH

C= concentration of KOH solution

V= volume of solution

Substituting values;

14.555g/56.1056 g/mol = C× 500/1000

0.259 moles = 0.5C

C= 0.259/0.5

C= 0.518 M

If the acid is HA, the reaction equation is;

KOH(aq) + HA(aq) ----> KA(aq) + H2O(l)

The concentration of the acid is usually determined via titration. This involves delivering a particular volume of acid in a burette into the base and watching out for the volume of acid used at end point. If there are air bubbles in the burette, then more volume of acid is recorded than that actually used and this will make the calculated concentration of the acid to be higher than the actual concentration of acid present.

Answer: HZ > HX > HY in order of decreasing strengths.

Explanation: Generally, the rule is that the stronger the acid, the weaker its conjugate base and vice versa; same rule applies for bases and their conjugate acids.

So the weakest base Z- would have the strongest conjugate acid. Consequently, the strongest base Y- would have the weakest conjugate acid.

I hope this was MORE helpful as this is the correct answer.

The ranking of the conjugate acids in order of decreasing strength (i.e from strongest to weakest) is; HZ < HX < HY

First we must know that the stronger a base is, the weaker is it's conjugate acid and the weaker a base is, the stronger is it's conjugate acid.

Therefore, the order of decreasing strength of the conjugate acid is; HZ < HX < HY

Read more:

https://brainly.com/question/23917439

Answer:

Hydrogen and oxygen

Explanation:

Answer:

eight

Explanation:

the elements of course are the following

hydrogen

oxygen

calcium

sodium

sulfur

magnesium

chlorine

potassium

i hope this helps you

Answer:

Consider each of the following molecules in turn: (a) dimethyl ether, (CH3)2O; (b) trimethylamine, (CH3)3N; (c) trimethylboron, (CH3)3B; and (d) carbon dioxide (CO2). Describe the hybridization state of the central atom (i.e., O, N, B, or C) of each molecule, tell what bond angles you would expect at the central atom, and state whether the molecule would have a dipole moment.

Answer: Reaction 1 is non spontaneous.

Explanation:

According to Gibb's equation:

[tex]\Delta G=\Delta H-T\Delta S[/tex]

[tex]\Delta G[/tex] = Gibbs free energy  

[tex]\Delta H[/tex] = enthalpy change

[tex]\Delta S[/tex] = entropy change  

T = temperature in Kelvin

When [tex]\Delta G[/tex] = +ve, reaction is non spontaneous

[tex]\Delta G[/tex]= -ve, reaction is spontaneous

[tex]\Delta G[/tex]= 0, reaction is in equilibrium

For the given reaction 1: [tex]glucose+Pi\rightarrow glucose-6-phosphate+H_2O[/tex] [tex]\Delta G=+13.8kJ/mol[/tex]

As for the reaction 1 , the value of Gibbs free energy is positive and thus the reaction 1 is non spontaneous.

Answer:

melting point will be higher than that of pure ethyl acetate

Explanation:

Answer:b

Explanation:

The correct set of coefficients of the balanced chemical equation of sodium carbonate and hydrochloric acid is 1, 2, 2, 1, 1. Therefore, option (b) is correct.

The chemical equation in which the number of atoms of each element of substances is equal on either side of the chemical equation is known as a balanced chemical equation.

The law of conservation of mass must be followed by every balanced chemical equation. By obeying this law, the total mass of reactants should be equal to the total mass of the products in a balanced chemical equation.

Given the chemical equation of the reaction between sodium carbonate and hydrochloric acid,

Na₂CO₃  +  HCl  →  NaCl  +  H₂O  +  CO₂

The balanced chemical equation will be the one in which the number of Na, C, O, H, and Cl will be equal on both sides of the equation.

Na₂CO₃  +  2 HCl  →  2 NaCl  +  CO₂  +  H₂O  

Therefore, the set of coefficients for the balanced reaction is 1, 2, 2, 1, 1.

Learn more about the balanced chemical equation, here:

brainly.com/question/15052184

#SPJ2

Answer: The concentration of NaOH solution is 0.194 M

Explanation:

To calculate the number of moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex]

Given mass of KHP = 0.294 g

Molar mass of KHP = 204.22 g/mol

Putting values in above equation, we get:

[tex]\text{Moles of KHP}=\frac{0.294g}{204.22g/mol}=0.00144mol[/tex]

The chemical reaction follows the equation:

[tex]KHC_8H_4O_4(aq.)+NaOH\rightarrow KNaC_8H_4O_4(aq.)+H_2O(l)[/tex]

By Stoichiometry of the reaction:

1 mole of KHP reacts with 1 mole of NaOH.

So, 0.00144 moles of KHP will react with = 0.0144 of KOH.

To calculate the molarity of NaOH, we use the equation:

[tex]\text{Molarity of the solution}=\frac{\text{Moles of solute}}{\text{Volume of solution (in L)}}[/tex]

We are given:

Moles of KOH = 0.00144 moles

Volume of solution = 7.42ml  = 0.00742L      (Conversion factor:  1L = 1000 mL)

Putting values in above equation, we get:

[tex]Molarity=\frac{0.00144mol}{0.00742L}=0.194M[/tex]

Hence, the molarity of NaOH solution is 0.194 M

The concentration of the NaOH solution used in complete titration has been 0.194 M.

The reaction of KHP with NaOH has been the neutralization reaction that results in the formation of salt and water.

The concentration of KHP solution has been:

Molarity = [tex]\rm \dfrac{weight}{Molecular\;weight}\;\times\;\dfrac{1000}{Volume\;(ml)}[/tex]

Molarity of KHP = [tex]\rm \dfrac{0.294}{204.2}\;\times\;\dfrac{1000}{250}[/tex]

Molarity of KHP = 0.0057 M

The concentration of the KHP solution has been 0.0057 M.

For the neutralization reaction in complete titration:

Molarity of acid [tex]\times[/tex] Volume of acid = Molarity of base [tex]\times[/tex] Volume of base

Substituting the values from the question:

0.0057 M [tex]\times[/tex] 250 ml = Molarity of NaOH [tex]\times[/tex] 7.42 ml

1.439 = Molarity of NaOH [tex]\times[/tex] 7.42 ml

Molarity of NaOH = 0.194 M.

The concentration of the NaOH solution used in complete titration has been 0.194 M.

For more information about complete titration, refer to the link:

https://brainly.com/question/13679687

Answer:

C ) The rate will triple

Answer:

C. As scientists have learned more about chemicals, they have  become more aware of their dangers

Explanation:

Chemicals are substances with standard compositions, held together by chemical bonds. Chemicals can exist in different phases such as solid, liquid, and gaseous phases. Over time, with a growing understanding of chemicals, their composition, and their reaction methods, scientists now have a better knowledge of the dangers chemicals can pose. To that effect, they have created standard safety measures for those who have to work with these chemicals.

When these guidelines are strictly adhered to, the chances of suffering accidents, burns, and explosions with these chemicals are significantly reduced.

The options of the question is not given so the options are;

(1) Mn(s)

(2) Cu(s)

(3) Ni(s)

(4) Ba(s)

Answer: Mn(s)

Explanation:

The spontaneous reaction depends on the Eo value. The positive Eo value are spontaneous and the negative Eo values are not spontaneous.

so, here the Eo values are:

Eo Zn2+/Zn = -0.763v

Eo Mg2+/Mg = 2.37v

Eo Mn2+/Mn = -1.18v

Therefore, Eo cell (with Zn as one of the half-cell) =  Eo Zn2+/Zn - Eo Mn2+/Mn

=  -0.763 - (-1.18)

 = 0.417v

Whereas, Eo cell (with Mg as one of the half-cell) =  Eo Mg2+/Zn - Eo Mn2+/Mn

=  -2.37 - (-1.18) = -1.19v

Thus, Mn(s) metal will spontaneously react because it has a positive  Eo value and  Zn2+(aq), but will not spontaneously react with Mg2+(aq) because it has negative Eo value.

Answer:

0°C.

Explanation:

Hello,

In this case, given the heating curve of water on the attached document, we can notice that at 0 °C the solid starts melting, which means that the melting point is reached. Melting point is known as a physical change whereby a solid changes to liquid by the addition of heat as it allows the molecules to separate to each other.

Best regards.

Answer:

0 degrees celcius

Explanation:

I took the test

Answer:

Protons, Neutrons, and Electrons are all in atoms so the one not present would be the Element since Elements are made of atoms.

Explanation:

Answer:

a) Fe(s) + Ni^2+(aq) ----> Fe^2+(aq) + Ni(s)

b) no reaction

c) no reaction

d) 2Mg(s) + 2H2O(l)-----> 2Mg^2+(aq) + O2(g) +4H^+(aq)

e) no reaction

Explanation:

It is important to say here that the ability of a particular chemical specie to displace another chemical specie is dependent on the relative standard reduction potentials of the species involved.

All the reactions stated above are redox reactions. Let us take reaction E as an example. Mg^2+ has a reduction potential of -2.37 V while Cr^3+ has a reduction potential of -0.74V. Since the reduction potential of magnesium is more negative than that of chromium, there is no reaction when a piece of chromium metal is dipped into a solution of Mg^2+.

Similarly, though metals displace hydrogen gas from dilute acids, metals that are less than hydrogen in the reactivity series cannot do that. This explains why there is no reaction when copper and silver are dipped into dilute acid solutions.

Reaction occurs when iron is dipped into a nickel solution because the reduction potential of Fe^2+ is far more negative than that of Ni^2+.

Answer:

Zero

Explanation:

Hello,

The question require us to calculate the mass of nitrogen present in aluminium carbonate.

This can easily be calculated using Avogadro's number as a constant with some minor calculations but however in this case, we can't because there's no single atom of nitrogen present in aluminium carbonate hence we can't calculate the mass of nitrogen present in it.

Chemical formula of aluminium carbonate = Al₂(CO₃)₃.

From the above chemical formula, we can see that there's no single atom of nitrogen present in the formula hence the mass of nitrogen present in aluminium carbonate that contains 1.23×10²³ carbon atoms is zero.

Boric acid is not what is known as a protonic acid meaning it is unable to release the H+ ions by itself. However, it can act as a traditional Lewis Acid so it is considered a weak acid.

Answer:

Boric acid is not able to release H⊕ ion on its own. It receives ӨOH ion from water molecule to complete its octet and in turn releases H⊕ ions.

It has the chemical formula H3BO3 (sometimes written B(OH)3), and exists in the form of colorless crystals or a white powder that dissolves in water. When occurring as a mineral, it is called sassolite

credit : wikipedia

Answer:

The octet rule is possible in those atoms which has high number of electrons in their shells.

Explanation:

The octet rule is a type of rule in which the atom has 8 electrons in its outermost shell or valance shell. This rule is not possible for hydrogen and helium because there are very less number of electrons and we know that octet rule needed more number of electrons. Only one atom may be hydrogen or helium is affected in the structure is affected in these situations due to presence of less number of electrons in shells.

Answer:

Option A. 1110 KPa.

Explanation:

The following data were obtained from the question:

Volume (V) = 3 dm³

Number of mole (n) = 8 moles

Temperature (T) = 50K

Gas constant (R) = 8.31 KPa.dm³/Kmol

Pressure (P) =..?

Pressure inside the cylinder can be obtained by using the ideal gas equation as follow:

PV =nRT

P x 3 = 8 x 8.31 x 50

Divide both side by 3

P= (8 x 8.31 x 50) /3

P = 1108 ≈ 1110 KPa

Therefore, the pressure inside the cylinder is 1110 KPa

Answer:

See detailed answer with explanation below.

Explanation:

Valence electrons are electrons found on the outermost shell of an atom. They are the electrons in an atom that participate in chemical combination. Recall that the outermost shell of an atom is also referred to as its valence shell. Let us consider an example; if we look at the atom, sodium-11, its electronic configuration is 2,8,1. The last one electron is the valence electron of sodium which is found in its outermost or valence shell.

Positive ions are formed when electrons are lost from the valence shell of an atom. For instance, if the outermost electron in sodium is lost, we now form the sodium ion Na^+ which is a positive ion. Positive ions possess less number of electrons compared to their corresponding atoms.

Negative ions are formed when one or more electrons is added to the valence shell of an atom. A negative ion possesses more electrons than its corresponding atom. For example, chlorine(Cl) contains 17 electrons but the chloride ion (Cl^-) contains 18 electrons.

In molecular compounds, a bond is formed when two electrons are shared between the bonding atoms. Each bonding atom may contribute one of the shared electrons (ordinary covalent bond) or one of the bonding atoms may provide the both shared electrons (coordinate covalent bond). The shared pair may be located at an equidistant position to the nucleus of both atoms. Similarly, the electron may be drawn closer to the nucleus of one atom than the other (polar covalent bond) depending on the electro negativity of the two bonding atoms.

The electrons are shared in order to complete the octet of each atom by so doing, the both bonding atoms now obey the octet rule. For example, two chlorine atoms may come together to form a covalent bond in which each chlorine atom has an octet of electrons on its outermost shell.

Answer:

The most common analgesic tablets contains a mixture of caffeine, aspirin, acetaminophen, along with binder.

The binders are neutral substances that are employed to keep tablet intact during packaging, shipping and being swallowed.  Examples of binder are silica gel, cellulose, starch etc.

And the remaining aspirin, acetaminophen and caffeine can be classified as strong acid, weak acid and base, respectively by merely observing functional groups they possess.

Explanation:

question

Acetominophen , Aspirin, Binder, ,  

Identify the strong organic acid, weak organic acid, base and neutral substance isolated in these experiments.

The strong organic acid is   __________________________________.

The weak organic acid is   __________________________________.

The organic base is __________________________________.

The neutral substance is __________________________________

explanation

Aspirin contains -COOH making it strong acid than phenol compound

Acetominophen contains phenolic -OH, making it weak organic acid

Caffeine contains Nitrogen atoms whch can donate lonepair of H⁺ , this makes it basic

Explanation:

Electron affinity is defined as the energy released by the addition of an electron to any gaseous atom. Electron affinity of an atom depends on the electronic configuration.

a).The carbon has vacant p-orbital and nitrogen has half-filled configuration which is more stable. Therefore, one electron can be easily added to carbon whereas nitrogen having more stable configuration releases more amount of energy on adding one electron. Therefore, nitrogen has more electron affinity than carbon.

The bromine has vacant p-orbital whereas argon has filled orbital which is most stable. Therefore, one electron can be easily added to bromine whereas argon having  more stable configuration releases more amount of energy on adding one electron.Therefore, argon has more electron affinity than bromine.

Answer:

1. a. C; b. N; c. C; 2. a. Br; b. Ar; c. Br

Explanation:

Use your Periodic Table and follow the trends in atomic properties (Fig. 1).

Electron affinity increases from left to right and from bottom to top.

The elements with the most exothermic EA are at the upper right corner

Exceptions are the noble gases (group 18) and the pnictogens (group 18).

The elements of Group 18 have a complete octet and have no tendency to accept electrons.  

The elements of Group 15 have half-filled p subshells. They are more stable than the elements immediately preceding them, so they are less exothermic when adding an electron.  

Ionization energy increases from left to right and from bottom to top.  

The atoms with the highest IE are at the upper right corner.

Atomic size increases from right to left and from bottom to top.  

The largest atoms are on the lower-left corner.

1. C vs N

(a)   EA: C. N is a Group 15 element

(b)    IE: N. N is further to the right.

(c) Size: C. C is further to the left.

2. Ar vs Br

(a)   EA: Br. Ar is a noble gas.

(b)    IE: Ar. Ar is further to the right.

(c) Size: Br. Br is nearer to the bottom.

Answer:

Explanation:

Stereoisomers are two or more atoms that  have the same bonding order of atoms but there is a difference  spatial arrangement of  the  atoms in space.

A plane of symmetry divides a molecule into two equal halves.

A chiral stereoisomer are not superimposed on a mirror image , Hence they do not posses a plane of symmetry.

As a result to that. these non-superimposable mirror images are said to be Enantiomers.

However, a Fischer Projection emanates from a two - dimensional figure which is used for presenting a three - dimensional organic molecules.

From the given question;

Fischer projection for an enantiomer of 2-bromo-2,3-dihydroxypropanal with the bromine oriented horizontally to the left and the hydroxide group oriented horizontally to the right.

we can sketch the way the enantiomer of 2-bromo-2,3-dihydroxypropanal can  be seen like the one shown below:

              CH₂OH

                   |

                   |

                   |

Br -------------|----------------OH

                   |

                   |

                   |

                 CHO

The objective of this question is to drawn the perspective formula of the molecule.

So , from the attached file below; we can see the perspective formula of the molecule in a well structured 3-D format.

Answer:

Covalent Molecule

Explanation:

Answer:

- Both energy and matter cannot be neither created nor destroyed.

- An equilibrium temperature will be reached.

Explanation:

Hello,

In this case, the law of conservation is applied to both matter and energy, and it states that both energy and matter cannot be neither created nor destroyed. Specifically, in chemical reactions, it states that in closed systems, the mass of the reactants equals the mass of the products even when the number of moles change. Moreover, for energy, if two substances at different temperatures come into contact, the hot one will cool down and the cold one will heat up until an equilibrium temperature so the energy lost by the hot one is gained by the cold one, which accounts for the transformation of energy.

Best regards.

Answer:

CH3CH2CH2COOH

Explanation:

Both carboxylic acids and alcohols posses hydrogen bonding. The difference between the two lies in the strength of the hydrogen bonding and the structure of the molecules.

Alcohols predominantly form linear hydrogen bonds in which the dipole of the -OH group of one molecule interacts with that of another molecule. This gives a linear arrangement of hydrogen bonded intermolecular interactions which significantly impacts the boiling point of alcohols.

However, the carboxylic acids posses the carbonyl (C=O) which is more polar and interacts more effectively with the -OH bond to form dimmer species. These dimmers have a much higher boiling point than the corresponding alcohols due to stronger hydrogen bonds. Hence CH3CH2CH2COOH has a greater boiling point than CH3CH2CH2OH.

The other compounds in the options do not posses hydrogen bonds hence they will have much lower boiling points.

Answer:9.84x 10^-31m

Explanation: 9.84x 10^-31m

Heisenberg uncertainty principle states that  says that the position and momentum of a particle cannot be known at the same time and accurately. and that the values  of position and momentum all times must be greater than h/4π.

Using the formula for Heisenberg Uncertainty principle

Δx. Δp ≥ h / 4π

=Δx. m ΔV ≥ h / 4π

where h = Planck’s constant = 6.62607004 × 10-34 m2 kg / s

Δx is the uncertainty in position

Δp is the uncertainty in momentum

m = mass

Δv=is the uncertainty in velocity

Given,

v = 0.80m/s,

m = 0.67 g = 0.67 g / 1000

= 0.00067 kg

h = 6.62607004 × 10-34 m2 kg / s

uncertainty in the velocity is 0.1 m/s.

Δv = 0.80×0.1 = 0.080m/s

Δx. m ΔV ≥ h / 4π

Δx  ≥ h / 4πm ΔV

6.62607004 × 10-34 / 4 π x 0.08 x 0.00067

=6.62607004 × 10-34 / 4 x3.14  5.3 x 10^-5 = 9.84x 10^-31m

Answer:

D

Explanation:

[tex]F=ma \\\\F=2000\cdot 5=10,000N[/tex]

Hope this helps!

Answer:

20mL of the stock solution and dilute to 100mL

Explanation:

20mM = 0.020M is the concentration of the diluted solution. As you want to prepare this solution from a 0.1M solution, dilution factor is:

0.1M / 0.020M = 5

That means you need to dilute the stock solution 5 times to obtain the 20mM sucrose solution.

As you want to prepare 100mL, you need to add:

100mL / 5 =

Answer:

Explanation:

Calculate ΔG (in kJ) for the following reaction at 1.0 atm for C2H6,

0.5 atm for O2, and

2.0 atm for CO2, and

25 oC:

C2H6 (g) + O2 (g) ---> CO2 (g) + H2O (l) (unbalanced)

ΔGfo C2H6 (g) = - 32.89 kJ/mol;

ΔGfo CO2 (g) = - 394.4 kJ/mol;

ΔGfo H2O (l) = - 237.13 kJ/mol

The balance equation of this reaction is

[tex]2C_2H_6 (g) + 7O_2 (g) ---> 4CO_2 (g) + 6H_2O (l)[/tex]

[tex]\Delta G_{rxn}=\sum G^o_f(product)-\sum G^o_f(reactant)[/tex]

[tex]=4G^o_f(CO_2)+6G^o_f(H_2O)-7G^o_f(O_2)-2G^o_f(C_2H_6)\\\\[/tex]

[tex][4(-394.4)+6(-237.13)-7(0)-2(-32.89)]kJ/mol\\\\=-1577.6-1422.78+65.78\\\\=-3000.38+65.78\\\\=-2934.6kJ/mol[/tex]