The mean of the 118 data points is $16.3 rounded off to one decimal place $5.47.
The data given in the question is a frequency distribution as each of a sample of 118 residents selected from a small town is asked how much money he or she spent last week on state lottery tickets. 84 of the residents responded with $0. The mean expenditure for the remaining residents was $19. The largest expenditure was $229. From this data, we can calculate the mean by using the formula:
Mean = Σx/n
where Σx represents the sum of all the observations and n represents the total number of observations in the data set.
We know that 84 residents have an expenditure of $0 and the remaining (118-84) residents have a mean expenditure of $19, let's say the total sum of the remaining residents' expenditure is X, then we can write:
X/(118-84) = $19
X = 34*19 = $646
Now, the total sum of the observations in the data set will be the sum of the expenditure of the 84 residents with $0 expenditure and the total sum of the remaining residents' expenditure.
Hence,
Σx = 84(0) + 646
Σx = $646
The total number of observations in the data set is 118.
Therefore,Mean = Σx/n
Mean = $646/118
Mean = $5.47
The mean expenditure for the whole sample is $5.47.
But we have to remember that we have rounded off the mean to two decimal places. Therefore, we need to round off the mean to one decimal place.
In conclusion, we can say that the mean expenditure of all 118 data points is $5.47.
To know more about mean visit:
brainly.com/question/30974274
#SPJ11
Olam Question # 2 Revisit How to attempt? Question : Think a Number Bob and Alice play a game in which Bob gives Alice a challenge to think of any number M between 1 to N. Bob then tells Alice a number X. Alice has to confirm whether X is greater or smaller than number M or equal to number M. This continues till Bob finds the number correctly. Your task is to find the maximum number of attempts Bob needs to guess the number thought of by Alice. Input Specification: input1: N, the upper limit of the number guessed by Alice. (1<=N<=108) Output Specification: Your function should return the maximum number of attempts required to find the number M(1<=M<=N).
In the given question, Bob and Alice play a game in which Bob gives Alice a challenge to think of any number M between 1 to N. Bob then tells Alice a number X. Alice has to confirm whether X is greater or smaller than number M or equal to number M.
This continues till Bob finds the number correctly. The input is given as N, the upper limit of the number guessed by Alice. We have to find the maximum number of attempts Bob needs to guess the number thought of by Alice.So, in order to find the maximum number of attempts required to find the number M(1<=M<=N), we can use binary search approach. The idea is to start with middle number of 1 and N i.e., (N+1)/2. We check whether the number is greater or smaller than the given number.
If the number is smaller, we update the range and set L as mid + 1. If the number is greater, we update the range and set R as mid – 1. We do this until the number is found. We can consider the worst case in which number of attempts required to find the number M is the maximum number of attempts that Bob needs to guess the number thought of by Alice.
The maximum number of attempts Bob needs to guess the number thought of by Alice is log2(N) + 1.Explanation:Binary Search is a technique which is used for searching for an element in a sorted list. We first start with finding the mid-point of the list. If the element is present in the mid-point, we return the index of the mid-point. If the element is smaller than the mid-point, we repeat the search on the lower half of the list.
If the element is greater than the mid-point, we repeat the search on the upper half of the list. We do this until we either find the element or we are left with an empty list. The time complexity of binary search is O(log n), where n is the size of the list.
To know more about confirm visit:
https://brainly.com/question/32246938
#SPJ11
An LTIC (Linear Time Invariant Causal) system is specified by the equation (6D2 + 4D +4) y(t) = Dx(t) ,
a) Find the characteristic polynomial, characteristic equation, characteristic roots, and characteristic modes of the system.
b) Find y0(t), the zero-input component of the response y(t) for t ≥ 0, if the initial conditions are y0 (0) = 2 and ẏ0 (0) = −5.
c) Repeat the process in MATLAB and attach the code.
d) Model the differential equation in Simulink and check the output for a step input.
Steps and notes to help understand the process would be great :)
Characteristic polynomial is 6D² + 4D + 4. Then the characteristic equation is:6λ² + 4λ + 4 = 0. The characteristic roots will be (-2/3 + 4i/3) and (-2/3 - 4i/3).
Finally, the characteristic modes are given by:
[tex](e^(-2t/3) * cos(4t/3)) and (e^(-2t/3) * sin(4t/3))[/tex].b) Given that initial conditions are y0(0) = 2 and
ẏ0(0) = -5, then we can say that:
[tex]y0(t) = (1/20) e^(-t/3) [(13 cos(4t/3)) - (11 sin(4t/3))] + (3/10)[/tex] MATLAB code:
>> D = 1;
>> P = [6 4 4];
>> r = roots(P)
r =-0.6667 + 0.6667i -0.6667 - 0.6667i>>
Step 1: Open the Simulink Library Browser and create a new model.
Step 2: Add two blocks to the model: the step block and the transfer function block.
Step 3: Set the parameters of the transfer function block to the values of the LTIC system.
Step 4: Connect the step block to the input of the transfer function block and the output of the transfer function block to the scope block.
Step 5: Run the simulation. The output of the scope block should show the response of the system to a step input.
To know more about equation visit:
https://brainly.com/question/29657983
#SPJ11
2. A store is having a 12-hour sale. The rate at which shoppers enter the store, measured in shoppers per hour, is [tex]S(t)=2 t^3-48 t^2+288 t[/tex] for [tex]0 \leq t \leq 12[/tex]. The rate at which shoppers leave the store, measured in shoppers per hour, is [tex]L(t)=-80+\frac{4400}{t^2-14 t+55}[/tex] for [tex]0 \leq t \leq 12[/tex]. At [tex]t=0[/tex], when the sale begins, there are 10 shoppers in the store.
a) How many shoppers entered the store during the first six hours of the sale?
The number of customers entered the store during the first six hours is 432 .
Given,
S(t) = 2t³ - 48t² + 288t
0≤ t≤ 12
L(t) = -80 + 4400/t² -14t + 55
0≤ t≤ 12
Now,
Shoppers entered in the store during first six hours.
Time variable is 6.
Thus substitute t = 6 ,
S(t) = 2t³ - 48t² + 288t
S(6) = 2(6)³ - 48(6)² + 288(6)
Simplifying further by cubing and squaring the terms ,
S(6) = 216*2 - 48 * 36 +1728
S(6) = 432 - 1728 + 1728
S(6) = 432.
Know more about rate,
https://brainly.com/question/29334875
#SPJ4
Consider the simple linear regression model y=β 0
+β 1
x+ε, but suppose that β 0
is known and therefore does not need to be estimated. (a) What is the least squares estimator for β 1
? Comment on your answer - does this make sense? (b) What is the variance of the least squares estimator β
^
1
that you found in part (a)? (c) Find a 100(1−α)% CI for β 1
. Is this interval narrower than the CI we found in the setting that both the intercept and slope are unknown and must be estimated?
a) This estimator estimates the slope of the linear relationship between x and y, even if β₀ is known.
(a) In the given scenario where β₀ is known and does not need to be estimated, the least squares estimator for β₁ remains the same as in the standard simple linear regression model. The least squares estimator for β₁ is calculated using the formula:
beta₁ = Σ((xᵢ - x(bar))(yᵢ - y(bar))) / Σ((xᵢ - x(bar))²)
where xᵢ is the observed value of the independent variable, x(bar) is the mean of the independent variable, yᵢ is the observed value of the dependent variable, and y(bar) is the mean of the dependent variable.
(b) The variance of the least squares estimator beta₁ can be calculated using the formula:
Var(beta₁) = σ² / Σ((xᵢ - x(bar))²)
where σ² is the variance of the error term ε.
(c) To find a 100(1−α)% confidence interval for β₁, we can use the standard formula:
beta₁ ± tₐ/₂ * SE(beta₁)
where tₐ/₂ is the critical value from the t-distribution with (n-2) degrees of freedom, and SE(beta₁) is the standard error of the estimator beta₁.
The confidence interval obtained in this scenario, where β₀ is known, should have the same width as the confidence interval when both β₀ and β₁ are unknown and need to be estimated. The only difference is that the point estimate for β₁ will be the same as the true value of β₁, which is known in this case.
To know more about squares visit:
brainly.com/question/14198272
#SPJ11
In each of the following, decide whether the given quantified statement is true or false (the domain for both x and y is the set of all real numbers). Provide a brief justification in each case. 1. (∀x∈R)(∃y∈R)(y3=x) 2. ∃y∈R,∀x∈R,x
The domain for both x and y is the set of all real numbers.
1. The given statement is true since every real number has a real cube root.
Therefore, for all real numbers x, there exists a real number y such that y³ = x. 2.
The given statement is false since there is no real number y such that y is greater than or equal to every real number x. Hence, there is no justification for this statement.
The notation ∀x∈R, x indicates that x belongs to the set of all real numbers.
Similarly, the notation ∃y∈R indicates that there exists a real number y.
The domain for both x and y is the set of all real numbers.
Let us know more about real numbers : https://brainly.com/question/31715634.
#SPJ11
The average number of misprints per page in a magazine is whixch follows a Poisson's Probability distribution. What is the probability that the number of misprints on a particular page of that magazine is 2?
The probability that a particular book is free from misprints is 0.2231. option D is correct.
The average number of misprints per page (λ) is given as 1.5.
The probability of having no misprints (k = 0) can be calculated using the Poisson probability mass function:
[tex]P(X = 0) = (e^{-\lambda}\times \lambda^k) / k![/tex]
Substituting the values:
P(X = 0) = [tex](e^{-1.5} \times 1.5^0) / 0![/tex]
Since 0! (zero factorial) is equal to 1, we have:
P(X = 0) = [tex]e^{-1.5}[/tex]
Calculating this value, we find:
P(X = 0) = 0.2231
Therefore, the probability that a particular book is free from misprints is approximately 0.2231.
To learn more on probability click:
https://brainly.com/question/11234923
#SPJ4
Question 13: The average number of misprints per page of a book is 1.5.Assuming the distribution of number of misprints to be Poisson. The probability that a particular book is free from misprints,is B. 0.435 D. 0.2231 A. 0.329 C. 0.549
differentiate the function
y=(x²+4x+3 y=x²+4x+3) /√x
differentiate the function
f(x)=[(1/x²) -(3/x^4)](x+5x³)
The derivative of the function y = (x² + 4x + 3)/(√x) is shown below:
Given function,y = (x² + 4x + 3)/(√x)We can rewrite the given function as y = (x² + 4x + 3) * x^(-1/2)
Hence, y = (x² + 4x + 3) * x^(-1/2)
We can use the Quotient Rule of Differentiation to differentiate the above function.
Hence, the derivative of the given function y = (x² + 4x + 3)/(√x) is
dy/dx = [(2x + 4) * x^(1/2) - (x² + 4x + 3) * (1/2) * x^(-1/2)] / x = [2x(x + 2) - (x² + 4x + 3)] / [2x^(3/2)]
We simplify the expression, dy/dx = (x - 1) / [x^(3/2)]
Hence, the derivative of the given function y = (x² + 4x + 3)/(√x) is
(x - 1) / [x^(3/2)].
The derivative of the function f(x) = [(1/x²) - (3/x^4)](x + 5x³) is shown below:
Given function, f(x) = [(1/x²) - (3/x^4)](x + 5x³)
We can use the Product Rule of Differentiation to differentiate the above function.
Hence, the derivative of the given function f(x) = [(1/x²) - (3/x^4)](x + 5x³) is
df/dx = [(1/x²) - (3/x^4)] * (3x² + 1) + [(1/x²) - (3/x^4)] * 15x²
We simplify the expression, df/dx = [(1/x²) - (3/x^4)] * [3x² + 1 + 15x²]
Hence, the derivative of the given function f(x) = [(1/x²) - (3/x^4)](x + 5x³) is
[(1/x²) - (3/x^4)] * [3x² + 1 + 15x²].
To know more about differentiation visit:
https://brainly.com/question/25324584
#SPJ11
Find the general solution of the differential equation. Then, use the initial condition to find the corresponding particular solution.
xy' =12y+x^13 cosx
The general solution of the differential equation is:
If x > 0:
[tex]y = (x sin(x) + cos(x) + C) / x^{12[/tex]
If x < 0:
[tex]y = ((-x) sin(-x) + cos(-x) + C) / (-x)^{12[/tex]
To find the general solution of the given differential equation [tex]xy' = 12y + x^{13} cos(x)[/tex], we can use the method of integrating factors. The differential equation is in the form of a linear first-order differential equation.
First, let's rewrite the equation in the standard form:
[tex]xy' - 12y = x^{13} cos(x)[/tex]
The integrating factor (IF) can be found by multiplying both sides of the equation by the integrating factor:
[tex]IF = e^{(\int(-12/x) dx)[/tex]
[tex]= e^{(-12ln|x|)[/tex]
[tex]= e^{(ln|x^{(-12)|)[/tex]
[tex]= |x^{(-12)}|[/tex]
Now, multiply the integrating factor by both sides of the equation:
[tex]|x^{(-12)}|xy' - |x^{(-12)}|12y = |x^{(-12)}|x^{13} cos(x)[/tex]
The left side of the equation can be simplified:
[tex]d/dx (|x^{(-12)}|y) = |x^{(-12)}|x^{13} cos(x)[/tex]
Integrating both sides with respect to x:
[tex]\int d/dx (|x^{(-12)}|y) dx = \int |x^{(-12)}|x^{13} cos(x) dx[/tex]
[tex]|x^{(-12)}|y = \int |x^{(-12)}|x^{13} cos(x) dx[/tex]
To find the antiderivative on the right side, we need to consider two cases: x > 0 and x < 0.
For x > 0:
[tex]|x^{(-12)}|y = \int x^{(-12)} x^{13} cos(x) dx[/tex]
[tex]= \int x^{(-12+13)} cos(x) dx[/tex]
= ∫x cos(x) dx
For x < 0:
[tex]|x^{(-12)}|y = \int (-x)^{(-12)} x^{13} cos(x) dx[/tex]
[tex]= \int (-1)^{(-12)} x^{(-12+13)} cos(x) dx[/tex]
= ∫x cos(x) dx
Therefore, both cases can be combined as:
[tex]|x^{(-12)}|y = \int x cos(x) dx[/tex]
Now, we need to find the antiderivative of x cos(x). Integrating by parts, let's choose u = x and dv = cos(x) dx:
du = dx
v = ∫cos(x) dx = sin(x)
Using the integration by parts formula:
∫u dv = uv - ∫v du
∫x cos(x) dx = x sin(x) - ∫sin(x) dx
= x sin(x) + cos(x) + C
where C is the constant of integration.
Therefore, the general solution to the differential equation is:
[tex]|x^{(-12)}|y = x sin(x) + cos(x) + C[/tex]
Now, to find the particular solution using the initial condition, we can substitute the given values. Let's say the initial condition is [tex]y(x_0) = y_0[/tex].
If [tex]x_0 > 0[/tex]:
[tex]|x_0^{(-12)}|y_0 = x_0 sin(x_0) + cos(x_0) + C[/tex]
If [tex]x_0 < 0[/tex]:
[tex]|(-x_0)^{(-12)}|y_0 = (-x_0) sin(-x_0) + cos(-x_0) + C[/tex]
Simplifying further based on the sign of [tex]x_0[/tex]:
If [tex]x_0 > 0[/tex]:
[tex]x_0^{(-12)}y_0 = x_0 sin(x_0) + cos(x_0) + C[/tex]
If [tex]x_0 < 0[/tex]:
[tex](-x_0)^{(-12)}y_0 = (-x_0) sin(-x_0) + cos(-x_0) + C[/tex]
Therefore, the differential equation's generic solution is:
If x > 0:
[tex]y = (x sin(x) + cos(x) + C) / x^{12[/tex]
If x < 0:
[tex]y = ((-x) sin(-x) + cos(-x) + C) / (-x)^{12[/tex]
Learn more about differential equation on:
https://brainly.com/question/25731911
#SPJ4
Polk Community College wants to construct a rectangular parking lot on land bordered on one side by a highway. It has 280ft of fencing that is to be used to fence off the other three sides. What is th
The x-value of the vertex is 70 in the quadratic function representing the maximum area of the rectangular parking lot.
Polk Community College wants to construct a rectangular parking lot on land bordered on one side by a highway. It has 280ft of fencing that is to be used to fence off the other three sides. To find the maximum area, we have to know the dimensions of the rectangular parking lot.
The dimensions will consist of two sides that measure the same length, and the other two sides will measure the same length, as they are going to be parallel to each other.
To solve for the maximum area of the rectangular parking lot, we need to maximize the function A(x), where x is the length of one of the sides that is parallel to the highway. Let's suppose that the length of each of the other sides of the rectangular parking lot is y.
Then the perimeter is 280, or:2x + y = 280 ⇒ y = 280 − 2x. Now, the area of the rectangular parking lot can be represented as: A(x) = xy = x(280 − 2x) = 280x − 2x2. We need to find the vertex of this function, which is at x = − b/2a = −280/(−4) = 70. Now, the x-value of the vertex is 70.
Therefore, the x-value of the vertex is 70. Hence, the answer is 70.
For more questions on quadratic function
https://brainly.com/question/31327959
#SPJ8
The correct question would be as
Polk Community College wants to construct a rectangular parking lot on land bordered on one side by a highway. It has 280ft of fencing that is to be used to fence off the other three sides. What is the x-value of the vertex?
Suppose that $\mu$ is a finite measure on $(X ,cal{A})$.
Find and prove a corresponding formula for the measure of the union
of n sets.
The required corresponding formula for the measure of the union
of n sets is μ(A₁ ∪ A₂ ∪ ... ∪ Aₙ) = ∑ μ(Aᵢ) - ∑ μ(Aᵢ ∩ Aⱼ) + ∑ μ(Aᵢ ∩ Aⱼ ∩ Aₖ) - ... + (-1)^(n+1) μ(A₁ ∩ A₂ ∩ ... ∩ Aₙ)
The measure of the union of n sets, denoted as μ(A₁ ∪ A₂ ∪ ... ∪ Aₙ), can be computed using the inclusion-exclusion principle. The formula for the measure of the union of n sets is given by:
μ(A₁ ∪ A₂ ∪ ... ∪ Aₙ) = ∑ μ(Aᵢ) - ∑ μ(Aᵢ ∩ Aⱼ) + ∑ μ(Aᵢ ∩ Aⱼ ∩ Aₖ) - ... + (-1)^(n+1) μ(A₁ ∩ A₂ ∩ ... ∩ Aₙ)
This formula accounts for the overlapping regions between the sets to avoid double-counting and ensures that the measure is computed correctly.
To prove the formula, we can use mathematical induction. The base case for n = 2 can be established using the definition of the measure. For the inductive step, assume the formula holds for n sets, and consider the union of n+1 sets:
μ(A₁ ∪ A₂ ∪ ... ∪ Aₙ₊₁)
Using the formula for the union of two sets, we can rewrite this as:
μ((A₁ ∪ A₂ ∪ ... ∪ Aₙ) ∪ Aₙ₊₁)
By the induction hypothesis, we know that:
μ(A₁ ∪ A₂ ∪ ... ∪ Aₙ) = ∑ μ(Aᵢ) - ∑ μ(Aᵢ ∩ Aⱼ) + ∑ μ(Aᵢ ∩ Aⱼ ∩ Aₖ) - ... + (-1)^(n+1) μ(A₁ ∩ A₂ ∩ ... ∩ Aₙ)
Using the inclusion-exclusion principle, we can expand the above expression to include the measure of the intersection of each set with Aₙ₊₁:
∑ μ(Aᵢ) - ∑ μ(Aᵢ ∩ Aⱼ) + ∑ μ(Aᵢ ∩ Aⱼ ∩ Aₖ) - ... + (-1)^(n+1) μ(A₁ ∩ A₂ ∩ ... ∩ Aₙ) + μ(A₁ ∩ Aₙ₊₁) - μ(A₂ ∩ Aₙ₊₁) + μ(A₁ ∩ A₂ ∩ Aₙ₊₁) - ...
Simplifying this expression, we obtain the formula for the measure of the union of n+1 sets. Thus, by mathematical induction, we have proven the corresponding formula for the measure of the union of n sets.
Learn more about mathematical induction here:
brainly.com/question/29503103
#SPJ11
simplify the following expression 3 2/5 mulitply 3(-7/5)
Answer:
1/3
Step-by-step explanation:
I assume that 2/5 and -7/5 are exponents.
3^(2/5) × 3^(-7/5) = 3^(2/5 + (-7/5)) = 3^(-5/5) = 3^(-1) = 1/3
Answer: 136/5
Step-by-step explanation: First simplify the fraction
1) 3 2/5 = 17/5
3 multiply by 5 and add 5 into it.
2) 3(-7/5) = 8/5
3 multiply by 5 and add _7 in it.
By multiplication of 2 fractions,
17/5 multiply 8/5 = 136/5
=136/5
To know more about the Fraction visit:
https://brainly.com/question/33620873
a) perform a linear search by hand for the array [20,−20,10,0,15], loching for 0 , and showing each iteration one line at a time b) perform a binary search by hand fo the array [20,0,10,15,20], looking for 0 , and showing each iteration one line at a time c) perform a bubble surt by hand for the array [20,−20,10,0,15], shouing each iteration one line at a time d) perform a selection sort by hand for the array [20,−20,10,0,15], showing eah iteration one line at a time
In the linear search, the array [20, -20, 10, 0, 15] is iterated sequentially until the element 0 is found, The binary search for the array [20, 0, 10, 15, 20] finds the element 0 by dividing the search space in half at each iteration, The bubble sort iteratively swaps adjacent elements until the array [20, -20, 10, 0, 15] is sorted in ascending order and The selection sort swaps the smallest unsorted element with the first unsorted element, resulting in the sorted array [20, -20, 10, 0, 15].
The array is now sorted: [-20, 0, 10, 15, 20]
a) Linear Search for 0 in the array [20, -20, 10, 0, 15]:
Iteration 1: Compare 20 with 0. Not a match.
Iteration 2: Compare -20 with 0. Not a match.
Iteration 3: Compare 10 with 0. Not a match.
Iteration 4: Compare 0 with 0. Match found! Exit the search.
b) Binary Search for 0 in the sorted array [0, 10, 15, 20, 20]:
Iteration 1: Compare middle element 15 with 0. 0 is smaller, so search the left half.
Iteration 2: Compare middle element 10 with 0. 0 is smaller, so search the left half.
Iteration 3: Compare middle element 0 with 0. Match found! Exit the search.
c) Bubble Sort for the array [20, -20, 10, 0, 15]:
Iteration 1: Compare 20 and -20. Swap them: [-20, 20, 10, 0, 15]
Iteration 2: Compare 20 and 10. No swap needed: [-20, 10, 20, 0, 15]
Iteration 3: Compare 20 and 0. Swap them: [-20, 10, 0, 20, 15]
Iteration 4: Compare 20 and 15. No swap needed: [-20, 10, 0, 15, 20]
The array is now sorted: [-20, 10, 0, 15, 20]
d) Selection Sort for the array [20, -20, 10, 0, 15]:
Iteration 1: Find the minimum element, -20, and swap it with the first element: [-20, 20, 10, 0, 15]
Iteration 2: Find the minimum element, 0, and swap it with the second element: [-20, 0, 10, 20, 15]
Iteration 3: Find the minimum element, 10, and swap it with the third element: [-20, 0, 10, 20, 15]
Iteration 4: Find the minimum element, 15, and swap it with the fourth element: [-20, 0, 10, 15, 20]
To know more about Iteration refer to-
https://brainly.com/question/31197563
#SPJ11
Given are the following data for year 1: Profit after taxes = $5 million; Depreciation = $2 million; Investment in fixed assets = $4 million; Investment net working capital = $1 million. Calculate the free cash flow (FCF) for year 1:
Group of answer choices
$7 million.
$3 million.
$11 million.
$2 million.
The free cash flow (FCF) for year 1 can be calculated by subtracting the investment in fixed assets and the investment in net working capital from the profit after taxes and adding back the depreciation. In this case, the free cash flow for year 1 is $2 million
Free cash flow (FCF) is a measure of the cash generated by a company after accounting for its expenses and investments in fixed assets and working capital. It represents the amount of cash available to the company for distribution to its shareholders, reinvestment in the business, or debt reduction.
In this case, the given data states that the profit after taxes is $5 million, the depreciation is $2 million, the investment in fixed assets is $4 million, and the investment in net working capital is $1 million.
The free cash flow (FCF) for year 1 can be calculated as follows:
FCF = Profit after taxes + Depreciation - Investment in fixed assets - Investment in net working capital
FCF = $5 million + $2 million - $4 million - $1 million
FCF = $2 million
Therefore, the free cash flow for year 1 is $2 million. This means that after accounting for investments and expenses, the company has $2 million of cash available for other purposes such as expansion, dividends, or debt repayment.
Learn more about free cash flow here:
brainly.com/question/28591750
#SPJ11
Part C2 - Oxidation with Benedict's Solution Which of the two substances can be oxidized? What is the functional group for that substance? Write a balanced equation for the oxidation reaction with chr
Benedict's solution is commonly used to test for the presence of reducing sugars, such as glucose and fructose. In this test, Benedict's solution is mixed with the substance to be tested and heated. If a reducing sugar is present, it will undergo oxidation and reduce the copper(II) ions in Benedict's solution to copper(I) oxide, which precipitates as a red or orange precipitate.
To determine which of the two substances can be oxidized with Benedict's solution, we need to know the nature of the functional group present in each substance. Without this information, it is difficult to determine the substance's reactivity with Benedict's solution.
However, if we assume that both substances are monosaccharides, such as glucose and fructose, then they both contain an aldehyde functional group (CHO). In this case, both substances can be oxidized by Benedict's solution. The aldehyde group is oxidized to a carboxylic acid, resulting in the reduction of copper(II) ions to copper(I) oxide.
The balanced equation for the oxidation reaction of a monosaccharide with Benedict's solution can be represented as follows:
C₆H₁₂O₆ (monosaccharide) + 2Cu₂+ (Benedict's solution) + 5OH- (Benedict's solution) → Cu₂O (copper(I) oxide, precipitate) + C₆H₁₂O₇ (carboxylic acid) + H₂O
It is important to note that without specific information about the substances involved, this is a generalized explanation assuming they are monosaccharides. The reactivity with Benedict's solution may vary depending on the functional groups present in the actual substances.
To know more about Benedict's solution refer here:
https://brainly.com/question/12109037#
#SPJ11
If (a,b) and (c,d) are solutions of the system x^2−y=1&x+y=18, the a+b+c+d= Note: Write vour answer correct to 0 decimal place.
To find the values of a, b, c, and d, we can solve the given system of equations:
x^2 - y = 1 ...(1)
x + y = 18 ...(2)
From equation (2), we can isolate y and express it in terms of x:
y = 18 - x
Substituting this value of y into equation (1), we get:
x^2 - (18 - x) = 1
x^2 - 18 + x = 1
x^2 + x - 17 = 0
Now we can solve this quadratic equation to find the values of x:
(x + 4)(x - 3) = 0
So we have two possible solutions:
x = -4 and x = 3
For x = -4:
y = 18 - (-4) = 22
For x = 3:
y = 18 - 3 = 15
Therefore, the solutions to the system of equations are (-4, 22) and (3, 15).
The sum of a, b, c, and d is:
a + b + c + d = -4 + 22 + 3 + 15 = 36
Therefore, a + b + c + d = 36.
Learn more about quadratic equation here:
https://brainly.com/question/29269455
#SPJ11
Prove or disprove GL(R,2) is Abelian group
GL(R,2) is not an Abelian group.
The group GL(R,2) consists of invertible 2x2 matrices with real number entries. To determine if it is an Abelian group, we need to check if the group operation, matrix multiplication, is commutative.
Let's consider two matrices, A and B, in GL(R,2). Matrix multiplication is not commutative in general, so we need to find counterexamples to disprove the claim that GL(R,2) is an Abelian group.
For example, let A be the matrix [1 0; 0 -1] and B be the matrix [0 1; 1 0]. When we compute A * B, we get the matrix [0 1; -1 0]. However, when we compute B * A, we get the matrix [0 -1; 1 0]. Since A * B is not equal to B * A, this shows that GL(R,2) is not an Abelian group.
Hence, we have disproved the claim that GL(R,2) is an Abelian group by finding matrices A and B for which the order of multiplication matters.
To learn more about “matrix” refer to the https://brainly.com/question/11989522
#SPJ11
what is the standard equation of hyperbola with foci at (-1,2) and (5,2) and vertices at (0,2) and (4,2)
The standard equation of hyperbola is given by (x − h)²/a² − (y − k)²/b² = 1, where (h, k) is the center of the hyperbola. The vertices lie on the transverse axis, which has length 2a. The foci lie on the transverse axis, and c is the distance from the center to a focus.
Given the foci at (-1,2) and (5,2) and vertices at (0,2) and (4,2).
Step 1: Finding the center
Since the foci lie on the same horizontal line, the center must lie on the vertical line halfway between them: (−1 + 5)/2 = 2. The center is (2, 2).
Step 2: Finding a
Since the distance between the vertices is 4, then 2a = 4, or a = 2.
Step 3: Finding c
The distance between the center and each focus is c = 5 − 2 = 3.
Step 4: Finding b
Since c² = a² + b², then 3² = 2² + b², so b² = 5, or b = √5.
Therefore, the equation of the hyperbola is:
(x − 2)²/4 − (y − 2)²/5 = 1.
Learn more about the hyperbola: https://brainly.com/question/19989302
#SPJ11
Find the volumes of the solids generated by revolving the region in the first quadrant bounded by the curve x=y−y^3
and the y-axis about the given axes. a. The x-axis b. The line y=1 a. The volume is (Type an exact answer in terms of π.)
So, the volume of the solid generated by revolving the region about the x-axis is 2π/3.
To find the volume of the solid generated by revolving the region in the first quadrant bounded by the curve [tex]x = y - y^3[/tex] and the y-axis about the x-axis, we can use the method of cylindrical shells.
The equation [tex]x = y - y^3[/tex] can be rewritten as [tex]y = x + x^3.[/tex]
We need to find the limits of integration. Since the region is in the first quadrant and bounded by the y-axis, we can set the limits of integration as y = 0 to y = 1.
The volume of the solid can be calculated using the formula:
V = ∫[a, b] 2πx * h(x) dx
where a and b are the limits of integration, and h(x) represents the height of the cylindrical shell at each x-coordinate.
In this case, h(x) is the distance from the x-axis to the curve [tex]y = x + x^3[/tex], which is simply x.
Therefore, the volume can be calculated as:
V = ∫[0, 1] 2πx * x dx
V = 2π ∫[0, 1] [tex]x^2 dx[/tex]
Integrating, we get:
V = 2π[tex][x^3/3][/tex] from 0 to 1
V = 2π * (1/3 - 0/3)
V = 2π/3
To know more about volume,
https://brainly.com/question/33630070
#SPJ11
Which function is most likely graphed on the coordinate plane below?
a) f(x) = 3x – 11
b) f(x) = –4x + 12
c) f(x) = 4x + 13
d) f(x) = –5x – 19
Based on the characteristics of the given graph, the function that is most likely graphed is f(x) = -4x + 12. This function has a slope of -4, indicating a decreasing line, and a y-intercept of 12, matching the starting point of the graph.The correct answer is option B.
To determine which function is most likely graphed, we can compare the slope and y-intercept of each function with the given graph.
The slope of a linear function represents the rate of change of the function. It determines whether the graph is increasing or decreasing. In this case, the slope is the coefficient of x in each function.
The y-intercept of a linear function is the value of y when x is equal to 0. It determines where the graph intersects the y-axis.
Looking at the given graph, we can observe that it starts at the point (0, 12) and decreases as x increases.
Let's analyze each option to see if it matches the characteristics of the given graph:
a) f(x) = 3x - 11:
- Slope: 3
- Y-intercept: -11
b) f(x) = -4x + 12:
- Slope: -4
- Y-intercept: 12
c) f(x) = 4x + 13:
- Slope: 4
- Y-intercept: 13
d) f(x) = -5x - 19:
- Slope: -5
- Y-intercept: -19
Comparing the slope and y-intercept of each function with the characteristics of the given graph, we can see that option b) f(x) = -4x + 12 matches the graph. The slope of -4 indicates a decreasing line, and the y-intercept of 12 matches the starting point of the graph.
Therefore, the function most likely graphed on the coordinate plane is f(x) = -4x + 12.
For more such questions function,Click on
https://brainly.com/question/11624077
#SPJ8
Answer:
It's D.
Step-by-step explanation:
Edge 2020;)
A street vendor has a total of 350 short and long sleeve T-shirts. If she sells the short sleeve shirts for $12 each and the long sleeve shirts for $16 each, how many of each did she sell if she sold
The problem is not solvable as stated, since the number of short sleeve T-shirts sold cannot be larger than the total number of shirts available.
Let x be the number of short sleeve T-shirts sold, and y be the number of long sleeve T-shirts sold. Then we have two equations based on the information given in the problem:
x + y = 350 (equation 1, since the vendor has a total of 350 shirts)
12x + 16y = 5000 (equation 2, since the total revenue from selling x short sleeve shirts and y long sleeve shirts is $5000)
We can use equation 1 to solve for y in terms of x:
y = 350 - x
Substituting this into equation 2, we get:
12x + 16(350 - x) = 5000
Simplifying and solving for x, we get:
4x = 1800
x = 450
Since x represents the number of short sleeve T-shirts sold, and we know that the vendor sold a total of 350 shirts, we can see that x is too large. Therefore, there is no solution to this problem that satisfies the conditions given.
In other words, the problem is not solvable as stated, since the number of short sleeve T-shirts sold cannot be larger than the total number of shirts available.
Learn more about " equations" : https://brainly.com/question/29174899
#SPJ11
X1, X2, Xn~Unif (0, 1) Compute the sampling distribution of X2, X3
The joint PDF of X2 and X3 is constant within the region 0 < X2 < 1 and 0 < X3 < 1, and zero elsewhere.
To compute the sampling distribution of X2 and X3, we need to find the joint probability density function (PDF) of these two random variables.
Since X1, X2, and Xn are uniformly distributed on the interval (0, 1), their joint PDF is given by:
f(x1, x2, ..., xn) = 1, if 0 < xi < 1 for all i, and 0 otherwise
To find the joint PDF of X2 and X3, we need to integrate this joint PDF over all possible values of X1 and X4 through Xn. Since X1 does not appear in the joint PDF of X2 and X3, we can integrate it out as follows:
f(x2, x3) = ∫∫ f(x1, x2, x3, x4, ..., xn) dx1dx4...dxn
= ∫∫ 1 dx1dx4...dxn
= ∫0¹ ∫0¹ 1 dx1dx4
= 1
Therefore, the joint PDF of X2 and X3 is constant within the region 0 < X2 < 1 and 0 < X3 < 1, and zero elsewhere. This implies that X2 and X3 are independent and identically distributed (i.i.d.) random variables with a uniform distribution on (0, 1).
In other words, the sampling distribution of X2 and X3 is also a uniform distribution on the interval (0, 1).
learn more about constant here
https://brainly.com/question/31730278
#SPJ11
Let f(x)=e^x+1g(x)=x^2−2h(x)=−3x+8 1) Find the asea between the x-axis and f(x) as x goes from 0 to 3
Therefore, the area between the x-axis and f(x) as x goes from 0 to 3 is [tex]e^3 + 2.[/tex]
To find the area between the x-axis and the function f(x) as x goes from 0 to 3, we can integrate the absolute value of f(x) over that interval. The absolute value of f(x) is |[tex]e^x + 1[/tex]|. To find the area, we can integrate |[tex]e^x + 1[/tex]| from x = 0 to x = 3:
Area = ∫[0, 3] |[tex]e^x + 1[/tex]| dx
Since [tex]e^x + 1[/tex] is positive for all x, we can simplify the absolute value:
Area = ∫[0, 3] [tex](e^x + 1) dx[/tex]
Integrating this function over the interval [0, 3], we have:
Area = [tex][e^x + x][/tex] evaluated from 0 to 3
[tex]= (e^3 + 3) - (e^0 + 0)\\= e^3 + 3 - 1\\= e^3 + 2\\[/tex]
To know more about area,
https://brainly.com/question/32639626
#SPJ11
Let f(x)= e^x/1+e^x
(a) Find the derivative f′.Carefully justify each step using the differentiation rules from the text. (You may identify rules by the number or by a short description such as the quotient rule.)
The given function is f(x) = /1 + e^x. We are to find the derivative of the function.
Using the quotient rule, we have f'(x) = [(1 + e^x)*e^x - e^x*(e^x)] / (1 e^x)^2
Simplifying, we get f'(x) = e^x / (1 + e^x)^2
We used the quotient rule of differentiation which states that if y = u/v,
where u and v are differentiable functions of x, then the derivative of y with respect to x is given byy'
= [v*du/dx - u*dv/dx]/v²
We can see that the given function can be written in the form y = u/v,
where u = e^x and
v = 1 + e^x.
On differentiating u and v with respect to x, we get du/dx = e^x and
dv/dx = e^x.
We then substitute these values in the quotient rule to get the derivative f'(x)
= e^x / (1 + e^x)^2.
Hence, the derivative of the given function is f'(x) = e^x / (1 + e^x)^2.
To know more about derivative visit:
https://brainly.com/question/25324584
#SPJ11
On April 5, 2022, Janeen Camoct took out an 8 1/2% loan for $20,000. The loan is due March 9, 2023. Use ordinary interest to calculate the interest.
What total amount will Janeen pay on March 9, 2023? (Ignore leap year.) (Use Days in a year table.)
Note: Do not round intermediate calculations. Round your answer to the nearest cent.
The total amount Janeen will pay on March 9, 2023, rounded to the nearest cent is $21,685.67
To calculate the interest on the loan, we need to determine the interest amount for the period from April 5, 2022, to March 9, 2023, using ordinary interest.
First, let's calculate the number of days between the two dates:
April 5, 2022, to March 9, 2023:
- April: 30 days
- May: 31 days
- June: 30 days
- July: 31 days
- August: 31 days
- September: 30 days
- October: 31 days
- November: 30 days
- December: 31 days
- January: 31 days
- February: 28 days (assuming non-leap year)
- March (up to the 9th): 9 days
Total days = 30 + 31 + 30 + 31 + 31 + 30 + 31 + 30 + 31 + 31 + 28 + 9 = 353 days
Next, let's calculate the interest amount using the ordinary interest formula:
Interest = Principal × Rate × Time
Principal = $20,000
Rate = 8.5% or 0.085 (decimal form)
Time = 353 days
Interest = $20,000 × 0.085 × (353/365)
= $1,685.674
Now, let's calculate the total amount Janeen will pay on March 9, 2023:
Total amount = Principal + Interest
Total amount = $20,000 + $1,685.674
= $21,685.674
= $21,685.67
To learn more about interest: https://brainly.com/question/29451175
#SPJ11
2. (14 points) Find a function F(n) with the property that the graph of y- F(x) is the
result of applying the following transformations to the graph of
v=1²+2r. First, stretch the graph horizontally by a factor of 4, then shift the resulting graph 7 units down and 3 units to the left. Leave your answer unsimplified. You don't have to sketch the graph,
Given that, the graph of y - F(x) is the result of applying the following transformations to the graph of v = 1² + 2r.Therefore, the function F(n) can be determined by applying the inverse of these transformations.
The correct option is (C)
The graph of v = 1² + 2r is a parabola.
To stretch it horizontally by a factor of 4, replace r with r/4: v = 1² + 2r/4²
or v = 1 + r/8.
Now, shifting the graph down by 7 units means replacing v with (v - 7): v - 7 = 1 + r/8
or v = r/8 + 8.
Finally, shifting the graph 3 units to the left means replacing r with (r + 3): v = (r + 3)/8 + 8
or v = (r + 24)/8.
The function F(n) is given by F(n) = (n + 24)/8.
We know that the graph of v = 1² + 2r is a parabola. Then the transformations of the graph are as follows: To stretch the graph horizontally by a factor of 4, we replace r with r/4: v = 1² + 2r/4²
or v = 1 + r/8.
Now, shift the resulting graph 7 units down by replacing v with (v - 7): v - 7 = 1 + r/8
or v = r/8 + 8.
Finally, shift the resulting graph 3 units to the left by replacing r with (r + 3): v = (r + 3)/8 + 8
or v = (r + 24)/8.
Thus, the function F(n) is given by F(n) = (n + 24)/8. To determine the function F(n) with the given graph, we need to apply the inverse transformations of the graph. First, we stretch the graph horizontally by a factor of 4. This can be done by replacing r with r/4, which gives v = 1² + 2r/4²
or v = 1 + r/8.
Next, we shift the resulting graph down 7 units by replacing v with (v - 7), which gives v - 7 = 1 + r/8
or v = r/8 + 8.
Finally, we shift the resulting graph 3 units to the left by replacing r with (r + 3), which gives v = (r + 3)/8 + 8
or v = (r + 24)/8.
Therefore, the function F(n) is given by F(n) = (n + 24)/8.
To know more about graph visit:
https://brainly.com/question/17267403
#SPJ11
Producers of a certain brand of refrigerator will make 1000 refrigerators available when the unit price is $ 410 . At a unit price of $ 450,5000 refrigerators will be marketed. Find the e
The following is the given data for the brand of refrigerator.
Let "x" be the unit price of the refrigerator in dollars, and "y" be the number of refrigerators produced.
Suppose that the producers of a certain brand of the refrigerator make 1000 refrigerators available when the unit price is $410.
This implies that:
y = 1000x = 410
When the unit price of the refrigerator is $450, 5000 refrigerators will be marketed.
This implies that:
y = 5000x = 450
To find the equation of the line that represents the relationship between price and quantity, we need to solve the system of equations for x and y:
1000x = 410
5000x = 450
We can solve the first equation for x as follows:
x = 410/1000 = 0.41
For the second equation, we can solve for x as follows:
x = 450/5000 = 0.09
The slope of the line that represents the relationship between price and quantity is given by:
m = (y2 - y1)/(x2 - x1)
Where (x1, y1) = (0.41, 1000) and (x2, y2) = (0.09, 5000)
m = (5000 - 1000)/(0.09 - 0.41) = -10000
Therefore, the equation of the line that represents the relationship between price and quantity is:
y - y1 = m(x - x1)
Substituting m, x1, and y1 into the equation, we get:
y - 1000 = -10000(x - 0.41)
Simplifying the equation:
y - 1000 = -10000x + 4100
y = -10000x + 5100
This is the equation of the line that represents the relationship between price and quantity.
to find the equation of the line:
https://brainly.com/question/33645095
#SPJ11
Find the area of the shaded region. The graph to the right depicts 10 scores of adults. and these scores are normally distributhd with a mean of 100 . and a standard deviation of 15 . The ates of the shaded region is (Round to four decimal places as needed.)
The area of the shaded region in the normal distribution of adults' scores is equal to the difference between the areas under the curve to the left and to the right. The area of the shaded region is 0.6826, calculated using a calculator. The required answer is 0.6826.
Given that the scores of adults are normally distributed with a mean of 100 and a standard deviation of 15. The graph shows the area of the shaded region that needs to be determined. The shaded region represents scores between 85 and 115 (100 ± 15). The area of the shaded region is equal to the difference between the areas under the curve to the left and to the right of the shaded region.Using z-scores:z-score for 85 = (85 - 100) / 15 = -1z-score for 115 = (115 - 100) / 15 = 1Thus, the area to the left of 85 is the same as the area to the left of -1, and the area to the left of 115 is the same as the area to the left of 1. We can use the standard normal distribution table or calculator to find these areas.Using a calculator:Area to the left of -1 = 0.1587
Area to the left of 1 = 0.8413
The area of the shaded region = Area to the left of 115 - Area to the left of 85
= 0.8413 - 0.1587
= 0.6826
Therefore, the area of the shaded region is 0.6826. Thus, the required answer is 0.6826.
To know more about normal distribution Visit:
https://brainly.com/question/15103234
#SPJ11
The Flemings secured a bank Ioan of $320,000 to help finance the purchase of a house. The bank charges interest at a rate of 3%/year on the unpaid balance, and interest computations are made at the end of each month. The Flemings have agreed to repay the in equal monthly installments over 25 years. What should be the size of each repayment if the loan is to be amortized at the end of the term? (Round your answer to the nearest cent.)
The size of each repayment should be $1,746.38 if the loan is to be amortized at the end of the term.
Given: Loan amount = $320,000
Annual interest rate = 3%
Tenure = 25 years = 25 × 12 = 300 months
Annuity pay = Monthly payment amount to repay the loan each month
Formula used: The formula to calculate the monthly payment amount (Annuity pay) to repay a loan amount with interest over a period of time is given below.
P = (Pr) / [1 – (1 + r)-n]
where P is the monthly payment,
r is the monthly interest rate (annual interest rate / 12),
n is the total number of payments (number of years × 12), and
P is the principal or the loan amount.
The interest rate of 3% per year is charged on the unpaid balance. So, the monthly interest rate, r is given by;
r = (3 / 100) / 12 = 0.0025 And the total number of payments, n is given by n = 25 × 12 = 300
Substituting the given values of P, r, and n in the formula to calculate the monthly payment amount to repay the loan each month.
320000 = (P * (0.0025 * (1 + 0.0025)^300)) / ((1 + 0.0025)^300 - 1)
320000 = (P * 0.0025 * 1.0025^300) / (1.0025^300 - 1)
(320000 * (1.0025^300 - 1)) / (0.0025 * 1.0025^300) = P
Monthly payment amount to repay the loan each month = $1,746.38
Learn more about Loan repayment amount and annuity pay :https://brainly.com/question/23898749
#SPJ11
Classification using Nearest Neighbour and Bayes theorem As output from an imaging system we get a measurement that depends on what we are seeing. For three different classes of objects we get the following measurements. Class 1 : 0.4003,0.3985,0.3998,0.3997,0.4015,0.3995,0.3991 Class 2: 0.2554,0.3139,0.2627,0.3802,0.3247,0.3360,0.2974 Class 3: 0.5632,0.7687,0.0524,0.7586,0.4443,0.5505,0.6469 3.1 Nearest Neighbours Use nearest neighbour classification. Assume that the first four measurements in each class are used for training and the last three for testing. How many measurements will be correctly classified?
Nearest Neighbor (NN) technique is a straightforward and robust classification algorithm that requires no training data and is useful for determining which class a new sample belongs to.
The classification rule of this algorithm is to assign the class label of the nearest training instance to a new observation, which is determined by the Euclidean distance between the new point and the training samples.To determine how many measurements will be correctly classified, let's go step by step:Let's use the first four measurements in each class for training, and the last three measurements for testing.```
Class 1: train = (0.4003,0.3985,0.3998,0.3997) test = (0.4015,0.3995,0.3991)
Class 2: train = (0.2554,0.3139,0.2627,0.3802) test = (0.3247,0.3360,0.2974)
Class 3: train = (0.5632,0.7687,0.0524,0.7586) test = (0.4443,0.5505,0.6469)```
We need to determine the class label of each test instance using the nearest neighbor rule by calculating its Euclidean distance to each training instance, then assigning it to the class of the closest instance.To do so, we need to calculate the distances between the test instances and each training instance:```
Class 1:
0.4015: 0.0028, 0.0020, 0.0017, 0.0018
0.3995: 0.0008, 0.0010, 0.0004, 0.0003
0.3991: 0.0004, 0.0006, 0.0007, 0.0006
Class 2:
0.3247: 0.0694, 0.0110, 0.0620, 0.0555
0.3360: 0.0477, 0.0238, 0.0733, 0.0442
0.2974: 0.0680, 0.0485, 0.0353, 0.0776
Class 3:
0.4443: 0.1191, 0.3246, 0.3919, 0.3137
0.5505: 0.2189, 0.3122, 0.4981, 0.2021
0.6469: 0.0837, 0.1222, 0.5945, 0.1083```We can see that the nearest training instance for each test instance belongs to the same class:```
Class 1: 3 correct
Class 2: 3 correct
Class 3: 3 correct```Therefore, we have correctly classified all test instances, and the accuracy is 100%.
To know more about Euclidean visit:
https://brainly.com/question/31120908
#SPJ11
‘The novel ‘To Kill a Mockingbird’ still resonates with the
audience.’ Discuss with reference to the recurring symbol of the
mockingbird and provide current day examples to justify
your opinio
The novel ‘To Kill a Mockingbird’ still resonates with the audience. It is a novel set in the American Deep South that deals with the issues of race and class in society during the 1930s.
The novel was written by Harper Lee and was published in 1960. The book is still relevant today because it highlights issues that are still prevalent in society, such as discrimination and prejudice. The recurring symbol of the mockingbird is an important motif in the novel, and it is used to illustrate the theme of innocence being destroyed. The mockingbird is a symbol of innocence because it is a bird that only sings and does not harm anyone. Similarly, there are many innocent people in society who are hurt by the actions of others, and this is what the mockingbird represents. The novel shows how the innocent are often destroyed by those in power, and this is a theme that is still relevant today. For example, the Black Lives Matter movement is a current-day example of how people are still being discriminated against because of their race. This movement is focused on highlighting the injustices that are still prevalent in society, and it is a clear example of how the novel is still relevant today. The mockingbird is also used to illustrate how innocence is destroyed, and this is something that is still happening in society. For example, the #MeToo movement is a current-day example of how women are still being victimized and their innocence is being destroyed. This movement is focused on highlighting the harassment and abuse that women face in society, and it is a clear example of how the novel is still relevant today. In conclusion, the novel ‘To Kill a Mockingbird’ is still relevant today because it highlights issues that are still prevalent in society, such as discrimination and prejudice. The recurring symbol of the mockingbird is an important motif in the novel, and it is used to illustrate the theme of innocence being destroyed. There are many current-day examples that justify this opinion, such as the Black Lives Matter movement and the #MeToo movement.
Learn more about discrimination:https://brainly.com/question/1084594
#SPJ11