The probability of the group consisting of all three Democrats is 0.121.
Total number of senators=47+49+4=100 number of Democrats=49. The required probability of selecting 3 Democrats at random is given by: P(all Democrats) = (number of ways to select 3 Democrats)/(total number of ways to select 3 senators). We can find the number of ways to select 3 Democrats from 49 Democrats as: n(Democrats)C₃= 49C₃=19684 [using combination]. We can find the total number of ways to select 3 senators from 100 senators as: n(total)C₃= 100C₃=161700 [using combination]. Therefore, the probability of selecting 3 Democrats from the Senate at random is: P(all Democrats) = (number of ways to select 3 Democrats)/(total number of ways to select 3 senators)= 19684/161700= 0.121. Therefore, the probability of selecting 3 Democrats from the Senate at random is 0.121 or 12.1%.
To learn more about random probability distribution: https://brainly.com/question/251701
#SPJ11
Another researcher wanted to know whether people strongly have a preference for one of the Pixar movie franchises. Below are the number of people who prefer the Incredibles movies vs Finding Nemo/Dory vs the Cars movies. Conduct the steps of hypothesis testing on these data.
Incredibles movies 18
Finding Nemo/Dory 23
Cars movies 6
To conduct hypothesis testing on the given data, a chi-square test for independence can be used.
The observed frequencies for each preference category (Incredibles, Finding Nemo/Dory, Cars) will be organized into a contingency table. The test will determine whether there is a significant association between people's preferences and the Pixar movie franchises. Expected frequencies will be calculated assuming independence. The test will yield a test statistic and a p-value. If the p-value is below a chosen significance level (e.g., 0.05), the null hypothesis will be rejected, indicating a significant association between preferences and the movie franchises. Hypothesis testing will be conducted using a chi-square test for independence. A contingency table will be created with observed frequencies for each preference category. The test will determine if there is an association between people's preferences and the Pixar movie franchises, with the null hypothesis assuming no association. Expected frequencies will be calculated assuming independence. The resulting test statistic and p-value will be used to determine if the null hypothesis should be rejected or not.
Learn more about chi-square test here : brainly.com/question/32120940
#SPJ11
The slope field for the equation y = -x +y is shown below 11:11 1-1-1-1 TTTTTTIT 1 - - 1 - 1 - 3 - 4 - 3- 4-4-4-4- 1411111 1111 On a print out of this slope field, sketch the solutions that pass through the points (i) (0,0); (ii) (-3,1); and (iii) (-1,0). From your sketch, what is the equation of the solution to the differential equation that passes through (-1,0)? (Verify that your solution is correct by substituting it into the differential equation.) y = }}}}}} ///// }}}}}/ 7171/ }}}} 3.12. Match each differential equation to a function which is a solution. FUNCTIONS A. y = 3x + x², B. y = e-8, C. y = sin(x), D.y=xt, E. y = 3 exp(2x), DIFFERENTIAL EQUATIONS 1. xy - y = x² 2. y"+y=0 3. y" + 15y +56y = 0 4.2x²y" + 3xy = y
The matched differential equations with their corresponding functions are:
xy - y = x² → y = x² (C)y" + y = 0 → y = Acos(x) + Bsin(x) (where A and B are constants)(C)y" + 15y + 56y = 0 → y = [tex]Ae^(-7x) + Be^(-8x)[/tex](where A and B are constants)(B)2x²y" + 3xy = y → y = [tex]Ax^(-1) + Bx^(-2)[/tex] (where A and B are constants)(D)Given that the slope field for the equation y = -x + y is shown below and we have to sketch the solutions that pass through the points (i) (0,0); (ii) (-3,1); and (iii) (-1,0).
From the sketch, we need to find the equation of the solution to the differential equation that passes through (-1,0).The slope field for the equation y = -x + y is shown below:
As shown in the slope field, the slope of the differential equation y = -x + y can be given as:dy/dx = y - x
The solution that passes through the point (0, 0) is y = x.
The solution that passes through the point (-3, 1) is y = x - 1.
The solution that passes through the point (-1, 0) is y = x.
The equation of the solution to the differential equation that passes through (-1, 0) is y = x.
To verify that our solution is correct, we need to substitute y = x in the differential equation:
dy/dx = y - x
dy/dx = x - x
dy/dx = 0
Therefore, y = x is a solution of the differential equation.
The differential equation that matches with the given functions are:1. xy - y = x² will have a function y = x²(C)
2. y" + y = 0 will have a function y = Acos(x) + Bsin(x)(where A and B are constants)(C)
3. y" + 15y + 56y = 0 will have a function [tex]y = Ae^(-7x) + Be^(-8x)[/tex](where A and B are constants)(B)
4. 2x²y" + 3xy = y will have a function[tex]y = Ax^(-1) + Bx^(-2)[/tex](where A and B are constants)(D)
Know more about the differential equations
https://brainly.com/question/1164377
#SPJ11
Suppose a simple random sample of size n 1000 is obtained from a population whose size is N1,500,000 and whose population proportion with a specified characteristic is a 0.47. Complete parte (a) through (c) below Click here to view the standard normal distribution table (page 1). Click here to view the standard nomal distribution table (page 2). (a) Describe the sampling distribution of p A. Approximately normal, 0.47 and 0 0.0158 0.0004 OB. Approximately normal, 0.47 and OC. Approximately normal, 0.47 and " 0.0002 (b) What is the probability of obtaining x 510 or more individuals with the characteristic? P(xa 610) - (Round to four decimal places as needed.) (c) What is the probability of obtaining x=440 or fewer individuals with the characteristic? Pixs 440) (Round to four decimal places as needed.)
a) The sampling distribution of p is approximately normal, with a mean of 0.47 and a standard deviation of 0.0158.
The correct option is (A): Approximately normal, 0.47 and 0.0158
b) The probability of obtaining x ≥ 510 individuals with the characteristic is 0.9886.
Answer: P(x ≥ 510) ≈ 0.9886c) The probability of obtaining x ≤ 440 individuals with the characteristic, P(x ≤ 440) is 0.0446.
What is the sampling distribution of p?(a) The sampling distribution of the proportion (p) can be approximated by a normal distribution using the formula:
σp = √((p * (1 - p)) / n)
where p is the population proportion and n is the sample size.
p = 0.47
n = 1000
σp = √((0.47 * (1 - 0.47)) / 1000)
σp ≈ √(0.2494 / 1000)
σp ≈ √(0.0002494)
σp ≈ 0.0158
(b) The probability of obtaining x ≥ 510 individuals with the characteristic is obtained using the normal distribution and converted to a standard normal distribution by applying the Z-score.
Z = √(x - np) / (np(1-p))
where
x is the number of individuals with the characteristicn is the sample size,p is the population proportion, andnp(1-p) is the variance.x = 510
n = 1000
p = 0.47
Z = (510 - 1000 * 0.47) / √(1000 * 0.47 * (1 - 0.47))
Z = (510 - 470) / √(1000 * 0.47 * 0.53)
Z = 40 / √(249.1)
Z ≈ 2.2678
Using a calculator, the probability corresponding to Z = 2.2678 is approximately 0.9886.
(c) The probability of obtaining x ≤ 440 individuals with the characteristic is obtained using the normal distribution and converted to a standard normal distribution by applying the Z-score.
Z = (440 - 1000 * 0.47) / √(1000 * 0.47 * (1 - 0.47))
Z = (440 - 470) / √(1000 * 0.47 * 0.53)
Z = -30 / √(249.1)
Z ≈ -1.7002
Using a calculator, the probability corresponding to Z = -1.7002 is 0.0446.
Learn more about probability at: https://brainly.com/question/24756209
#SPJ4
Write an equation for the line described. Give your answer in standard form. through (-5, 2), undefined slope Select one: O A. y = 2 B. y = -5 O C. x = 2 O D. x = -5
The given point is (-5, 2), undefined slope. To write an equation for the line described in standard form, we have to use the point-slope form equation.Option A: y = 2 is incorrect
The point-slope equation of the line passing through point (x₁, y₁) with undefined slope is x = x₁So, the equation of the line in standard form through (-5, 2), undefined slope is x = -5.Option C: x = 2 is incorrect because the slope is undefined, which means that the line is vertical and will not pass through a point whose x-coordinate is 2.Option B: y = -5 is incorrect because the slope is undefined, which means that the line is vertical and will not pass through a point whose y-coordinate is -5.Option A: y = 2 is incorrect because the slope is undefined, which means that the line is vertical and will not pass through a point whose y-coordinate is 2.
To know more about undefined slope visit:
https://brainly.com/question/16854310
#SPJ11
Which expression would be easier to simplify if you used the communitive property to change the order of the numbers?
The expression that would be easier to simplify if you used the communitive property to change the order of the numbers is -15 + (-25) + 43.
Option A.
Which expression would be easier to simplify?The expression that would be easier to simplify if you used the communitive property to change the order of the numbers is determined as follows;
Let's start with the option A;
the given expression;
= -15 + (-25) + 43
So if we look the above expression carefully, we will observe that we have two numbers that ended with 5, making the addition very easy. Also the two numbers that ends with 5 have the same sign, which will also make the simplification easy.
Now let's change the order of the numbers;
= 43 - 15 - 25
You can see that the simplification is very much easier now;
= 43 - 40
= 3
Note if you change the order of the numbers for C and D, you may end up having;
-12 + 40 + 10 (this is not easy to simplify)
-65 + 120 + 80 (this is not also easy to simplify compared to A)
Learn more about communitive property here: https://brainly.com/question/9421911
#SPJ1
.Evaluate the integral Noca ∫∫ D y² sin(x + 2y) + 1) dA where D is the diamond-shaped region with vertices (2,0), (0, 1), (-2,0) and (0,−1)
To evaluate the given integral, we use the properties of double integrals hence, the solution is cos(x+2) - cos(x-2) + 8.
Double integrals are used to calculate the total area, volume, and other values by integrating over a two-dimensional region. In the case of two-dimensional regions, we use double integrals to find the area by integrating a constant function over the region. Here, we are given the diamond-shaped region with vertices (2,0), (0, 1), (-2,0), and (0,-1).
Now, we have to evaluate the integral Noca ∫∫ D y² sin(x + 2y) + 1) dA. To solve this problem, we use double integral properties as follows:
∫∫ D y² sin(x + 2y) + 1) dA= ∫_{-2}^{0} ∫_{-y/2-1}^{y/2+1} y² sin(x + 2y) + 1 dxdy+ ∫_{0}^{2} ∫_{y/2-1}^{-y/2+1} y² sin(x + 2y) + 1 dxdy
The double integral can be rearranged as follows:
∫∫ D y² sin(x + 2y) + 1) dA= ∫_{-2}^{0} [(y/2 + 1)² sin(x + y + 1) + (y/2 + 1)] - [(y/2 - 1)² sin(x + y - 1) + (y/2 - 1)] dy+ ∫_{0}^{2} [(-y/2 + 1)² sin(x - y + 1) + (-y/2 + 1)] - [(-y/2 - 1)² sin(x - y - 1) + (-y/2 - 1)] dy
By simplifying, we get
∫∫ D y² sin(x + 2y) + 1) dA= ∫_{-2}^{0} y sin(x + 2y) dy + ∫_{0}^{2} (-y sin(x + 2y)) dy+ ∫_{-2}^{0} sin(x + y) dy - ∫_{0}^{2} sin(x - y) dy + 8
Now, we evaluate the integrals as follows:
∫_{-2}^{0} y sin(x + 2y) dy= [-cos(x + 2y)/2]_{-2}^{0}= -cos(x)/2 + cos(2x+4)/2 + 1∫_{0}^{2} (-y sin(x + 2y)) dy= [cos(x + 2y)/2]_{0}^{2}= -cos(2x+4)/2 + cos(x)/2 + 1∫_{-2}^{0} sin(x + y) dy= [-cos(x+y)]_{-2}^{0}= cos(x+2) - cos(x)∫_{0}^{2} sin(x - y) dy= [cos(x-y)]_{0}^{2}= cos(x) - cos(x-2)
Putting the values in the equation
∫∫ D y² sin(x + 2y) + 1) dA= -cos(x)/2 + cos(2x+4)/2 + 1 + cos(x)/2 - cos(2x+4)/2 - 1 + cos(x+2) - cos(x) + cos(x) - cos(x-2) + 8= cos(x+2) - cos(x-2) + 8
Hence, the solution is cos(x+2) - cos(x-2) + 8.
More on double integrals: https://brainly.com/question/32619008
#SPJ11
a is an n×n matrix. determine whether the statement below is true or false. justify the answer. if ax=λx for some vector x, then λ is an eigenvalue of a
The statement, "If Ax = λx for some "vector-x", then λ is eigenvalue of A" is False, because Ax = λx should also have nontrivial solution.
For the equation Ax = λx to hold, it is not sufficient to have just one vector x. The equation requires a nontrivial-solution, meaning that there must exist a vector x that is nonzero.
To determine if λ is an eigenvalue of matrix A, we need to find a nonzero vector x such that ax = λx. If such a nonzero vector exists, then λ is an eigenvalue of A; otherwise, it is not.
Therefore, the statement is false because it does not consider the requirement for a nontrivial solution to the equation ax = λx.
Learn more about Eigen Value here
https://brainly.com/question/29565569
#SPJ4
The given question is incomplete, the complete question is
A is an n×n matrix. Determine whether the statement below is true or false. justify the answer.
If ax = λx for some vector x, then λ is an eigenvalue of a.
Given a normal random variable X with mean 33 and variance 16, and a random sample of size n taken from the distribution, what sample size n is necessary in order that P(32.9≤X≤33.1)=0.975? MATH 217.A&B : Probability and Statistics (Spring 2021/22 Spring 2021/22 Meta Course) (Spring 2021/22 Spring 2021/22 Meta Courses) Tugce Ozgirgi - Homework:HW 6 Question 7,8.R.72 HW Score: 0%, 0 of 7 points O Points:0 of 1 Given a normal random variable X with mean 33 and variance 16, and a random sample of size n taken from the distribution, what sample size n is necessary in order that P(32.9 X 33.1) = 0.975? Click here to view page 1 of the standard normal distribution table Click here to view page 2 of the standard normal distribution table. The necessary sample size is n = (Round up to the nearest whole number.)
From the z-score, a sample size of 62 is necessary in order to have a 97.5% chance of observing a value of X between 32.9 and 33.1.
To find the sample size, we know the z-scores and critical value.
The z-scores for 32.9 and 33.1
[tex]z_1 = \frac{32.9 - {33}}{{16}} = -0.0625\\z_2 = \frac{33.1 - {33}}{{16}} = 0.0625[/tex]
Find the critical value z(0.975)
The critical value z(0.975) is the value of z such that the probability of a standard normal variable being less than or equal to z is 0.975. This value can be found using a z-table.
The critical value z(0.975) is 1.96.
Solving the equation:**
[tex]z0.975 = z_1/\sqrt{n}[/tex]
This equation can be solved for n to give:
[tex]n = z 0.975^2 * 16[/tex]
n = 1.96² * 16
n = 61.5 ≈ 62
The sample size is 62
Learn more on probability here;
https://brainly.com/question/24756209
#SPJ4
3. Find the shortest distance from the (1, 1, 1) to the plane 2x-2y+z=10.
The shortest distance from the point (1, 1, 1) to the plane 2x - 2y + z = 10 is [tex]\sqrt{3}[/tex] units. This is obtained by using the formula for the shortest distance between a point and a plane.
To find the shortest distance between a point and a plane, we need to use the formula [tex]d = |ax + by + cz + d| / \sqrt{(a^2 + b^2 + c^2)}[/tex], where (a, b, c) is the normal vector of the plane and (x, y, z) is the coordinates of the point. In this case, the normal vector of the plane is (2, -2, 1) and the point is (1, 1, 1). Plugging these values into the formula, we get [tex]d = |2(1) - 2(1) + 1(1) + 10| \sqrt{(2^2 + (-2)^2 + 1^2)} \\d = 12 / \sqrt{9} = \sqrt{3}[/tex]
Therefore, the shortest distance is [tex]\sqrt{3}[/tex] units.
To know more about distance click here brainly.com/question/30395212
#SPJ11
A normal distribution is a continuous, symmetric, bell-shaped
distribution of a variable. The mean, median, and mode are equal
and are located at the center of the distribution.
A.
True B. False
Normal distribution is a continuous, symmetric, bell-shaped distribution of a variable, and the mean, median, and mode are equal and located at the center of the distribution. True A
This is the definition of a normal distribution, which is also known as a Gaussian distribution. The curve of a normal distribution is bell-shaped because it has higher frequency values in the middle than it does at either end, and it is symmetric because it is mirrored around its center.
The normal distribution is the most common probability distribution, with many naturally occurring events that can be modeled using it. The normal distribution is used in statistics, engineering, economics, and other fields to model a variety of real-world phenomena.
Learn more about Normal distribution
brainly.com/question/15103234
#SPJ11
The table represents linear function F The equation y= 4x + 2 represents function G Which statement is true about these two functions? The rate of change of function G is less than the rate of change of Function F because 23. B The rate of change of Function G is less than the rate of change of Function F because 4 <9. C The rate of change of Function G is greater than the rate of change of Function F because 2 7 D The rate of change of Function G is greater than the rate of change of Function F because 4 > 3.
The correct statement is: D) The rate of change of Function G is greater than the rate of change of Function F because 4 > 3.
The rate of change of a linear function is determined by its slope, which is the coefficient of x in the equation. In function F, the coefficient of x is 4, indicating that for every increase of 1 unit in x, there is an increase of 4 units in y.
In function G, the coefficient of x is also 4, meaning that for every increase of 1 unit in x, there is also an increase of 4 units in y. Since the rate of change (slope) of function G is greater than that of function F, we can conclude that the rate of change of Function G is greater than the rate of change of Function F.
Learn more about coefficient here: brainly.com/question/13431100
#SPJ11
The mean temperature from 7th July to 9th July was 30-degree Celcius and from 8th July to 10th July was 28-degree Celcius. If the temperature on 10th July was 4/5th of the temperature on 7th July, what was the temperature on 10th July?
The temperature on the 7th of July is 30 degrees Celsius.
The temperature on the 10th of July was 24 degrees Celsius.
Given that;
The mean temperature from 7th July to 9th July was 30 degrees Celcius and from 8th July to 10th July was 28 degrees Celcius.
First, let's assume the temperature on the 7th of July is "x" degrees Celsius.
According to the information given, the mean temperature from 7th July to 9th July was 30 degrees Celsius.
So, we can write the equation:
(x + 30 + 30)/3 = 30
Simplifying this equation gives us:
(x + 60)/3 = 30
Multiply both sides by 3 to get:
x + 60 = 90
Subtracting 60 from both sides gives us:
x = 30
Therefore, the temperature on the 7th of July is 30 degrees Celsius.
Now, we are told that the temperature on the 10th of July was 4/5th of the temperature on the 7th of July.
So, the temperature on the 10th of July can be calculated as;
(4/5) × 30 = 24 degrees Celsius.
Therefore, the temperature on the 10th of July was 24 degrees Celsius.
To learn more about the addition visit:
https://brainly.com/question/25421984
#SPJ12
Consider d² u dx² which has a particular solution of the form, up = Ax sin x. (a) Suppose that u (0) = u (π) = 0. Explicitly attempt to obtain all solutions. Is your result consistent with the Fredholm alternative? +u = cos x,
The solutions to the given differential equation are of the form u(x) = c₁sin(x) + (1/2)xsin(x), where c₁ can take any value.
The homogeneous equation is d²u/dx² + u = 0.
The characteristic equation is r² + 1 = 0, which has the roots r = ±i.
The general solution to the homogeneous equation is u_h(x) = c₁sin(x) + c₂cos(x), where c₁ and c₂ are constants.
We assume the particular solution has the form [tex]u_p = Axsin(x)[/tex].
Plugging this into the differential equation, we have:
[tex](\dfrac{d^2u_p}{dx^2}) + u_p = (Acos(x)) + (Axsin(x)) = cos(x)[/tex].
To satisfy this equation, we need A = 1/2.
Therefore, the particular solution is [tex]u_p = (\dfrac{1}{2})xsin(x)[/tex].
General Solution:
[tex]u(x) = u_h(x) + u_p(x)[/tex]
= c₁sin(x) + c₂cos(x) + (1/2)xsin(x).
Applying Boundary Conditions:
Given u(0) = u(π) = 0,
Substitute these values into the general solution:
u(0) = c₂ = 0,
u(π) = c₁sin(π) = 0.
Since sin(π) = 0, c₁ can take any value.
Therefore, we have infinitely many solutions.
u(x) = c₁sin(x) + (1/2)xsin(x), where c₁ can take any value.
Learn more about the differential equation here:
https://brainly.com/question/32538700
#SPJ4
The complete question is as follows:
Consider d²u/dx² +u = cos x,
which has a particular solution of the form, up = Ax sin x. (a) Suppose that u (0) = u (π) = 0. Explicitly attempt to obtain all solutions. Is your result consistent with the Fredholm alternative?
A news reporter believes that less than 50% of eligible voters will vote in the next election. Here are the population statements. π = 0.5 π < 0.5 Is this a right-tailed, left-tailed, or two- tailed hypothesis test? A. Left-Tailed Hypothesis Test B. Right-Tailed Hypothesis Test C. Two-Tailed Hypothesis Test Jamie believes that more than 75% of adults prefer the iPhone. She set up the following population statements. π > 0.75 (Statement 1) π = 0.75 (Statement 2) Which statement is the claim?
The null hypothesis will always have a statement of equality, and the alternative hypothesis will always have a statement of inequality in a hypothesis test.
The answer to this question is the Left-Tailed Hypothesis Test. The hypothesis test is left-tailed when the alternative hypothesis contains a less-than inequality symbol. The claim is the main answer or hypothesis the researcher seeks to demonstrate.
Jamie believes that more than 75% of adults prefer the iPhone. She set up the following population statements. π > 0.75 (Statement 1) π = 0.75 (Statement 2) Which statement is the claim?
Statement 1 is the claim because it is what Jamie believes. She contends that more than 75% of adults prefer the iPhone. Therefore, the main answer is Statement 1. In hypothesis testing, the null hypothesis will always have a statement of equality, and the alternative hypothesis will always have a statement of inequality.
The hypothesis test is left-tailed when the alternative hypothesis contains a less-than-inequality symbol. In this scenario, the alternative hypothesis is π < 0.5, which is less-than- inequality. As a result, this is a Left-Tailed Hypothesis Test. A news reporter believes that less than 50% of eligible voters will vote in the next election, and the population statements are π = 0.5 and π < 0.5.
In this instance, π represents the proportion of the population that will vote in the next election. The null hypothesis, represented by π = 0.5, assumes that 50% of eligible voters will vote in the next election. The alternative hypothesis contradicts the null hypothesis. Jamie believes that more than 75% of adults prefer the iPhone. π > 0.75 is the population statement, and π = 0.75 is the second population statement. Statement 1, π > 0.75, is the claim because it is what Jamie believes.
To know more about the Left-Tailed Hypothesis Test, visit :
brainly.com/question/17101788
#SPJ11
find the absolute maximum and minimum values of the function over the indicated interval, and indicate the x-values at which they occur f(x)=x^2-4x-9; [0,5]
The absolute maximum and minimum values of the function over the indicated interval and indicate the x-values at which they occur f(x) = x² - 4x - 9; [0, 5],
we need to follow the steps given below:
Step 1: Differentiate the given function to find the critical points and intervals where the function increases and decreases.
f(x) = x² - 4x - 9f'(x)
= 2x - 4= 0
⇒ 2x = 4
⇒ x = 2
Thus, we get a critical point at x = 2.
Now, we will find the intervals where the function increases and decreases using the test point method:
f'(x) = 2x - 4> 0 for x > 2
∴ f(x) is increasing for x > 2.f'(x) = 2x - 4< 0 for x < 2
∴ f(x) is decreasing for x < 2.
Step 2: Check the function values at the critical points and the end points of the interval.
f(0) = (0)² - 4(0) - 9
= -9f(2) = (2)² - 4(2) - 9
= -13f(5) = (5)² - 4(5) - 9
= -19
Step 3: Now, we can identify the absolute maximum and minimum values of the function over the indicated interval
[0, 5].
Absolute maximum value of the function:
The absolute maximum value of the function over the interval [0, 5] is -9 and it occurs at x = 0.
Absolute minimum value of the function:
The absolute minimum value of the function over the interval [0, 5] is -19 and it occurs at x = 5.
Therefore, the absolute maximum and minimum values of the function over the indicated interval [0, 5] and the x-values at which they occur are as follows.
Absolute maximum value = -9 at x = 0
Absolute minimum value = -19 at x = 5
To know more about critical point, visit:
https://brainly.com/question/32077588
#SPJ11
Kimani is building shelves for her desk. She has a piece of wood that is 6.5 feet long. After cutting six equal pieces of wood from it, she has 0.8 feet of wood left over.
Part A: Write an equation that could be used to determine the length of each of the six pieces of wood she cut. (1 point)
Part B: Explain how you know the equation from Part A is correct. (1 point)
Part C: Solve the equation from Part A. Show every step of your work. (2 points)
Answer:
Part A: (6.5-0.8)/6
Part B: It is correct because you must first subtract which gives you 5.7, then divide by 6 which gives you 0.95. And to check the work you can easily multiply 0.95 by 6 and you will get 5.7 which is 0.8 less than 6.5.
Part C: 6.5-0.8=5.7 5.7/6=0.95
Step-by-step explanation:
For the matrix, list the real eigenvalues, repeated according to their multiplicities. The real eigenvalues are (Use a comma to separate answers as needed.) 20 0 00 14 0 00 -36 0 00 89 -2 20 7 3 -5 -8
Therefore, the real eigenvalues, repeated according to their multiplicities, are: 20, 14, -36, 0, 89, -2, 7, 3, -5, -8.
To determine the real eigenvalues of the given matrix, we need to find the values of λ that satisfy the equation |A - λI| = 0, where A is the matrix and I is the identity matrix.
The given matrix is:
A =
[20 0 0]
[0 14 0]
[0 0 -36]
To find the real eigenvalues, we solve the determinant equation:
|A - λI| = 0
Substituting the values into the determinant equation:
|20-λ 0 0|
|0 14-λ 0|
|0 0 -36-λ| = 0
Expanding the determinant:
(20-λ)((14-λ)(-36-λ)) - (0) - (0) - (0) = 0
[tex](20-λ)(-λ^2 + 22λ - 504) = 0[/tex]
Simplifying the equation:
[tex]-λ^3 + 42λ^2 - 704λ + 10080 = 0[/tex]
We can use numerical methods or a calculator to find the real eigenvalues. After solving the equation, we find the real eigenvalues to be:
λ₁ = 20 (with multiplicity 1)
λ₂ = 14 (with multiplicity 1)
λ₃ = -36 (with multiplicity 1)
λ₄ = 0 (with multiplicity 1)
λ₅ = 89 (with multiplicity 1)
λ₆ = -2 (with multiplicity 1)
λ₇ = 7 (with multiplicity 1)
λ₈ = 3 (with multiplicity 1)
λ₉ = -5 (with multiplicity 1)
λ₁₀ = -8 (with multiplicity 1)
To know more about eigenvalues,
https://brainly.com/question/31418493
#SPJ11
how to find the period of cos(pi*n+pi) and
cos(3/4*pi*n) as 1 and 4?
Consider the continuous-time signal ㅠ x (t) = 2 cos(6πt+) + cos(8πt + π) The largest possible sampling time in seconds to sample the signal without aliasing effects is denoted by Tg. With this sa
Let us find the period of cos(pi*n+pi) and cos(3/4*pi*n) below: Period of cos(pi*n+pi). The general equation of cos(pi*n+pi) is given as; cos(pi*n+pi) = cos(pi*n)cos(pi) - sin(pi*n)sin(pi) = -cos(pi*n)By definition, the period of a signal is the smallest positive number T, such that x[n+T] = x[n] for all integers n. This implies that; cos(pi*(n+1)+pi) = cos(pi*n+pi) = -cos(pi*n)This can only be satisfied if pi is a period of cos(pi*n+pi). We can confirm this by checking the function at a point: cos(pi*0+pi) = -1, and cos(pi*1+pi) = -1From the above, we can conclude that the period of cos(pi*n+pi) is pi. Period of cos(3/4*pi*n)The general equation of cos(3/4*pi*n) is given as; cos(3/4*pi*n) = cos(3pi/4*n)By definition, the period of a signal is the smallest positive number T, such that x[n+T] = x[n] for all integers n. This implies that; cos(3/4*pi*(n+1)) = cos(3/4*pi*n). This can only be satisfied if 4 is a period of cos(3/4*pi*n). We can confirm this by checking the function at a point: cos(3/4*pi*0) = 1 and cos(3/4*pi*4) = 1.
From the above, we can conclude that the period of cos(3/4*pi*n) is 4.
Learn more about period of cos:
https://brainly.com/question/4599903
#SPJ11
6. The distribution of the weight of a prepackaged "1-kilo pack" of cheddar cheese is assumed to be N(1.18, 0.072), and the distribution of the weight of a prepackaged *3-kilo pack" of cheese (special for cheese lovers) is N(3.22, 0.092). Select at random three 1-kilo packs of cheese, independently, with weights being X1, X2 and X3 respectively. Also randomly select one 3-kilo pack of cheese with weight being W. Let Y = X1 + X2 + X3. (a) Find the mgf of Y (b) Find the distribution of Y, the total weight of the three 1-kilo packs of cheese selected. (c) Find the probability P(Y
(a)The moment generating function of a random variable X is expected value of e^(tX) .(b) The mean of Y will be the sum of the means of X₁, X₂, and X₃ .(c)The CDF gives the probability that the random variable<=specific value.
(a) The moment generating function of a random variable X is defined as the expected value of e^(tX). For independent random variables, the mgf of the sum is equal to the product of their individual mgfs. In this case, the mgf of Y can be calculated as the product of the mgfs of X₁, X₂, and X₃. (b) The distribution of Y can be obtained by convolving the probability density functions (PDFs) of X₁, X₂, and X₃. Since X₁, X₂, and X₃ are normally distributed, the sum Y will also follow a normal distribution.
The mean of Y will be the sum of the means of X₁, X₂, and X₃ and the variance of Y will be the sum of the variances of X₁, X₂, and X₃. (c) To find the probability P(Y < W), we need to evaluate the cumulative distribution function (CDF) of Y at the value W. The CDF gives the probability that the random variable is less than or equal to a specific value
Learn more about probability click here:
brainly.com/question/31828911
#SPJ11
HINI Returns True after transposing the image All plug-in functions must return True or False. This function ret urns True because it modifies the image. It transposes the image, swaping col ums and rows. Transposing is tricky because you cannot just change the pixel valu es; you have to change the size of the image table. A 10x20 image becomes a 20x 10 image. The easiest way to transpose is to make a transposed copy with the pixels from the original image. Then remove all the rows in the image and repl ace it with the rows from the transposed copy. Parameter image: The image buffer Precondition: image is a 2d table of RGB objects
The function HINI returns True after transposing the image by swapping columns and rows. It modifies the image by changing its size and rearranging the pixel values.
Does the HINI function return True after transposing the image?The HINI function is designed to transpose an image, which involves swapping the columns and rows. However, transposing an image is not as simple as changing the pixel values. It requires modifying the size of the image table. For example, a 10x20 image needs to become a 20x10 image after transposition.
To achieve this, the function creates a transposed copy of the image, where the pixels are arranged according to the transposed order. Then, it removes all the rows in the original image and replaces them with the rows from the transposed copy. By doing so, the function successfully transposes the image.
The function follows the convention of plug-in functions, which are expected to return either True or False. In this case, since the image is modified during the transposition process, the HINI function returns True to indicate that the operation was performed successfully.
Learn more about HINI
brainly.com/question/29742241
#SPJ11
Lett be an i.i.d. process with E(et) = 0 and E(ɛ²t) = 1. Let
Yt = Yt-1 -1/4Yt-2 + Et
(a) Show that yt is stationary. (10 marks)
(b) Solve for yt in terms of Et, Et-1,...
(10 marks) (c) Compute the variance along with the first and second autocovariances of yt. (10 marks)
(d) Obtain one-period-ahead and two-period-ahead forecasts for yt.
The forecasts provide an estimate of the future values of Y based on the current and lagged values of Y and the error terms.
(a) The process Yₜ is stationary.
(b) Solving for Yₜ in terms of Eₜ, Eₜ₋₁, ..., we can use backward substitution to express Yₜ in terms of its lagged values:
Yₜ = Yₜ₋₁ - (1/4)Yₜ₋₂ + Eₜ
= Yₜ₋₁ - (1/4)[Yₜ₋₂ - (1/4)Yₜ₋₃ + Eₜ₋₁] + Eₜ
= Yₜ₋₁ - (1/4)Yₜ₋₂ + (1/16)Yₜ₋₃ - (1/4)Eₜ₋₁ + Eₜ
= Yₜ₋₁ - (1/4)Yₜ₋₂ + (1/16)Yₜ₋₃ - (1/4)Eₜ₋₁ + Eₜ
Continuing this process, we can express Yₜ in terms of its lagged values and the corresponding error terms.
(c) The variance of Yₜ can be computed as follows:
Var(Yₜ) = Var(Yₜ₋₁ - (1/4)Yₜ₋₂ + (1/16)Yₜ₋₃ - (1/4)Eₜ₋₁ + Eₜ)
= Var(Yₜ₋₁) + (1/16)Var(Yₜ₋₃) + (1/16)Var(Eₜ₋₃) + (1/16)Var(Eₜ₋₂) + Var(Eₜ)
= Var(Yₜ₋₁) + (1/16)Var(Yₜ₋₃) + 1 + 1 + 1
= Var(Yₜ₋₁) + (1/16)Var(Yₜ₋₃) + 3
The first autocovariance of Yₜ can be calculated as:
Cov(Yₜ, Yₜ₋₁) = Cov(Yₜ₋₁ - (1/4)Yₜ₋₂ + (1/16)Yₜ₋₃ - (1/4)Eₜ₋₁ + Eₜ, Yₜ₋₁)
= Cov(Yₜ₋₁, Yₜ₋₁) - (1/4)Cov(Yₜ₋₂, Yₜ₋₁) + (1/16)Cov(Yₜ₋₃, Yₜ₋₁) - (1/4)Cov(Eₜ₋₁, Yₜ₋₁) + Cov(Eₜ, Yₜ₋₁)
= Var(Yₜ₋₁) - (1/4)Cov(Yₜ₋₂, Yₜ₋₁) + (1/16)Cov(Yₜ₋₃, Yₜ₋₁)
Similarly, the second autocovariance of Yₜ can be computed as:
Cov(Yₜ, Yₜ₋₂) = Cov(Yₜ₋₁ - (1/4)Yₜ₋₂ + (1/16)Yₜ₋₃ - (1/4)Eₜ₋₁ + Eₜ, Yₜ₋₂)
= Cov(Y
ₜ₋₁, Yₜ₋₂) - (1/4)Cov(Yₜ₋₂, Yₜ₋₂) + (1/16)Cov(Yₜ₋₃, Yₜ₋₂) - (1/4)Cov(Eₜ₋₁, Yₜ₋₂) + Cov(Eₜ, Yₜ₋₂)
= Cov(Yₜ₋₁, Yₜ₋₂) - (1/4)Var(Yₜ₋₂) + (1/16)Cov(Yₜ₋₃, Yₜ₋₂)
(d) To obtain one-period-ahead forecast for Yₜ, we substitute the lagged values of Y into the equation:
Yₜ₊₁ = Yₜ - (1/4)Yₜ₋₁ + Eₜ₊₁
For two-periods-ahead forecast, we substitute the lagged values of Yₜ₊₁:
Yₜ₊₂ = Yₜ₊₁ - (1/4)Yₜ + Eₜ₊₂
To know more about substitution, refer here:
https://brainly.com/question/29383142#
#SPJ11
Find the number of ways to rearrange the eight letters of YOU HESHE so that none of YOU, HE, SHE occur. (b) (5 pts) Find the number combinations of 15 T-shirts selected from five colors (blue, gray, purple, yellow, white) of the same size so that there are at least two blues, one purple, and 3 whites.
The number of ways to rearrange the letters "YOUHESHE" without the words "YOU", "HE", or "SHE" is 21,600, and the number of combinations of 15 T-shirts with at least 2 blues, 1 purple, and 3 whites is calculated through different cases using combinations.
(a) To find the number of ways to rearrange the eight letters of "YOUHESHE" such that none of the words "YOU", "HE", or "SHE" occur, we can use the principle of inclusion-exclusion.
First, let's calculate the total number of arrangements without any restrictions. There are 8 letters in total, so there are 8! = 40,320 possible arrangements.
Next, let's count the number of arrangements where the word "YOU" appears. To fix the word "YOU" in a specific order, we treat it as one letter. So, we have 7 remaining letters to arrange, which can be done in 7! = 5,040 ways.
Similarly, we count the number of arrangements where "HE" or "SHE" appears. For each case, we treat the respective word as one letter and arrange the remaining letters. This gives us 7! = 5,040 arrangements for "HE" and 7! = 5,040 arrangements for "SHE".
However, we need to subtract the cases where two or more of these words occur together. There are two pairs ("YOU" and "HE", "YOU" and "SHE") that we need to consider. Treating each pair as one letter, we have 6 remaining letters to arrange. This can be done in 6! = 720 ways.
Now, using the principle of inclusion-exclusion, we can calculate the total number of arrangements without any of the forbidden words:
Total = Total arrangements - Arrangements with "YOU" - Arrangements with "HE" - Arrangements with "SHE" + Arrangements with ("YOU" and "HE") + Arrangements with ("YOU" and "SHE").
Total = 8! - (7! + 7! + 7!) + (6! + 6!).
Calculating this expression, we get
Total = 40,320 - (5,040 + 5,040 + 5,040) + (720 + 720) = 21,600.
Therefore, there are 21,600 ways to rearrange the letters of "YOUHESHE" such that none of the words "YOU", "HE", or "SHE" occur.
To know more about combinations,
https://brainly.com/question/31440228
#SPJ11
1. Evaluate each of the following: a. log327 b. logs 125 c. log432 d. log 36 (8K/U) 2. Evaluate each of the following: a. log69 + logo4 c. log: 25 – logzV27 b. log23.2 + log2100 – log25 d. 7log 75
The value of a. log₃(27) = 3
b. log₅(1/125) =-3
c. log₄(32) = 2.5
d. log₆(36) = 2
Let's evaluate each of the given logarithmic expressions:
1. a. log₃(27)
Using the property that [tex]log_b(x^y) = y * log_b(x)[/tex], we have:
log₃(27) = log₃(3³) = 3 * log₃(3) = 3 * 1 = 3
b. log₅(1/125)
Using the property that [tex]log_b(\frac{1}{x} ) = -log_b(x)[/tex], we have:
log₅(1/125) = -log₅(125) = -log₅(5³) = -3 * log₅(5) = -3 * 1 = -3
c. log₄(32)
Using the property that [tex]log_b(x^y) = y * log_b(x)[/tex], we have:
log₄(32) = log₄(2⁵) = 5 * log₄(2) = 2.5
d. log₆(36)
Using the property that [tex]log_b(x^y) = y * log_b(x)[/tex], we have:
log₆(36) = log₆(6²) = 2 * log₆(6) = 2 * 1 = 2
2. a. log₆(9) + log₆(4)
Using the property that [tex]log_b(x) + log_b(y) = log_b(xy)[/tex], we have:
log₆(9) + log₆(4) = log₆(9 * 4) = log₆(36) = 2
b. log₂(3.2) + log₂(100) - log₂(5)
Using the property that [tex]log_b(x) + log_b(y) = log_b(xy)[/tex] and [tex]log_b(x) - log_b(y) = log_b(\frac{x}{y} )[/tex], we have:
log₂(3.2) + log₂(100) - log₂(5) = log₂(3.2 * 100 / 5) = log₂(64) = 8
c. log₅(25) - log₃(27)
Using the property that[tex]log_b(x) - log_b(y) = log_b(\frac{x}{y} )[/tex], we have:
log₅(25) - log₃(27) = log₅(25/27)
d. 7log₇(5)
Using the property that [tex]log_b(b) = 1[/tex], we have:
7log₇(5) = 7 * 1 = 7
Learn more about Logarithm here
https://brainly.com/question/31469615
#SPJ4
take ω as the parallelogram bounded by x−y=0 , x−y=3π , x 2y=0 , x 2y=π2 evaluate: ∫∫sin(4x)dxdy
The value of the double integral ∫∫sin(4x) dxdy over the region ω bounded by x−y=0, x−y=3π, x 2y=0, and x 2y=π^2 is (1/32)*sin(4π²) - (1/8)*cos(4π²) - (1/8).
To evaluate the double integral ∫∫sin(4x) dxdy over the region ω bounded by x−y=0, x−y=3π, x 2y=0, and x 2y=π^2, we need to set up the integral in terms of the appropriate limits of integration.
The region ω can be represented by the following inequalities:
0 ≤ x ≤ π^2
0 ≤ y ≤ x/2
We can now set up the integral as follows:
∫∫ω sin(4x) dxdy = ∫₀^(π²) ∫₀^(x/2) sin(4x) dy dx
Integrating with respect to y first, we have:
∫∫ω sin(4x) dxdy = ∫₀^(π²) [y*sin(4x)]|₀^(x/2) dx
= ∫₀^(π²) (x/2)*sin(4x) dx
Now, we can integrate with respect to x:
∫∫ω sin(4x) dxdy = [-(1/8)*cos(4x) + (1/32)*sin(4x)]|₀^(π²)
= (1/32)*sin(4π²) - (1/8)*cos(4π²) - (1/32)*sin(0) + (1/8)*cos(0)
Simplifying further, we have:
∫∫ω sin(4x) dxdy = (1/32)*sin(4π²) - (1/8)*cos(4π²) - (1/8)
This is the value of the double integral ∫∫sin(4x) dxdy over the given region ω.
To know more about double integral,
https://brainly.com/question/31387250
#SPJ11
Find the eigenvalues 11 < 12 < 13 and associated unit eigenvectors ū1, ū2, üz of the symmetric matrix -2 -2 -57 = -2 -2 -5 5 -5 1 The eigenvalue 11 =|| = has associated unit eigenvector ūj
The eigenvalues of the given symmetric matrix are 11, 12, and 13, and the associated unit eigenvectors are ū1, ū2, and ūz.
Eigenvalues and eigenvectors are important concepts in linear algebra when studying matrices. In this case, we are given a symmetric matrix:
-2 -2 -5 5 -5 1To find the eigenvalues and eigenvectors, we need to solve the equation (A - λI)v = 0, where A is the matrix, λ is the eigenvalue, I is the identity matrix, and v is the eigenvector.
Using this equation, we obtain the following system of equations:
(-2 - λ)v₁ - 2v₂ - 5v₃ = 05v₁ - (5 + λ)v₂ + v₃ = 0Simplifying these equations and setting the determinant of the resulting matrix equal to zero, we can solve for the eigenvalues. After calculations, we find that the eigenvalues are 11, 12, and 13.
To find the associated unit eigenvectors, we substitute each eigenvalue back into the original equation and solve for the corresponding eigenvector. The unit eigenvectors are normalized to have a magnitude of 1.
Therefore, the eigenvalues of the symmetric matrix are 11, 12, and 13, and the associated unit eigenvectors are ū1, ū2, and ūz.
Learn more about Eigenvalues
brainly.com/question/13144436
#SPJ11
Let F(x) = f * 7 sin (ut?) et Evaluate each of the following: (a) F(1) = Number (b) F'(x) = fo (c) F'(3) =
F(1) is the value of the function F(x) when x is equal to 1. To evaluate F(1), we substitute x = 1 into the given equation: F(1) = f * 7 sin(u * 1). The result will depend on the specific values of f and u. Without knowing these values, we cannot determine the numerical value of F(1).
What is the value of the derivative F'(x) at x = 3?In the given equation, F(x) = f * 7 sin(ut), where f and u are constants. To evaluate the expression F(1), we substitute x = 1 into the equation. The value of F(1) will depend on the specific values of f and u, as well as the angle measure in radians for sin(ut). Without these specific values, it is not possible to determine the exact numerical result.
Regarding the derivative of F(x), denoted as F'(x), we need to find the rate of change of F(x) with respect to x. Taking the derivative of F(x) with respect to x will involve applying the chain rule, as the function includes a composition of multiple functions. However, without further information or the specific form of f and u, we cannot determine the derivative F'(x) analytically.
Learn more about function
brainly.com/question/31062578
#SPJ11
Choose The Simplified Form:
X²Y - 4xy² + 6x²Y + Xy / xy
To simplify the expression X²Y - 4xy² + 6x²Y + Xy / xy, we can simplify each term separately and then combine them.
Let's simplify each term:
X²Y/xy: The x in the denominator cancels out with one of the x's in the numerator, leaving X/Y.
-4xy²/xy: The xy in the numerator cancels out with the xy in the denominator, leaving -4y.
6x²Y/xy: The x in the denominator cancels out with one of the x's in the numerator, leaving 6xY/y, which simplifies to 6xY.
Xy/xy: The xy in the numerator cancels out with the xy in the denominator, leaving X/y.
Now, combining the simplified terms, we have:
(X/Y) - 4y + 6xY + (X/y).
To further simplify, we can combine like terms:
X/Y + (X/y) + 6xY - 4y.
So, the simplified form of the expression X²Y - 4xy² + 6x²Y + Xy / xy is X/Y + (X/y) + 6xY - 4y.
To learn more about Denominator - brainly.com/question/15007690
#SPJ11
1284) Determine the Inverse Laplace Transform of F(s)=18/s. ans: 1
The inverse Laplace transform of F(s) = 18/s is 18.
What is the result of finding the inverse Laplace transform of F(s) = 18/s?To determine the inverse Laplace transform of F(s) = 18/s, we can use the property of Laplace transforms that states:
L{1} = 1/s
By applying this property, we can rewrite F(s) as:
F(s) = 18 * (1/s)
Taking the inverse Laplace transform of both sides, we obtain:
L{F(s)} = L{18 * (1/s)}
Applying the linearity property of Laplace transforms, we can split the transform of the product into the product of the transforms:
L{F(s)} = 18 * L{1/s}
Using the property mentioned earlier, we know that the inverse Laplace transform of 1/s is 1. Therefore, we have:
L{F(s)} = 18 * 1
Simplifying further, we get:
L{F(s)} = 18
Thus, the inverse Laplace transform of F(s) = 18/s is simply 18.
Learn more about Laplace transforms
brainly.com/question/1597221
#SPJ11
The interest rate was measured in a group of the banks. Data expressed as a percentage were ordered in the form of a point distribution series, obtaining: 1-st class contained 15 banks with an interest rate of 2%; 2nd class contained 10 banks with an interest rate of 3%; 3rd class contained 8 banks with an interest rate of 4%; the fourth class contained 5 banks with an interest rate of 5%. The value of the structure indicator for 2nd class is: a. 0,26 b. 0,32 c. 0,15 d. 0,29
The value of the structure indicator for the 2nd class in the bank interest rate distribution series can be calculated. The answer is option (a) 0.26.
To calculate the structure indicator for a class in a distribution series, we use the formula:
Structure Indicator = (Number of Banks in the Class / Total Number of Banks) × Class Midpoint
In this case, for the 2nd class, there are 10 banks with an interest rate of 3%. To calculate the class midpoint, we take the average of the lower and upper class limits, which is (2 + 3) / 2 = 2.5%.
The total number of banks in all classes is 15 + 10 + 8 + 5 = 38.
Using the formula, we can calculate the structure indicator for the 2nd class:
Structure Indicator = (10 / 38) * 2.5
Structure Indicator ≈ 0.657
Therefore, the value of the structure indicator for the 2nd class is approximately 0.657.
To know more about structure indicators refer here:
https://brainly.com/question/29055175#
#SPJ11
For any integer N > 0, consider the set of points 2;= 2π) j = 0,...,N-1, (2.1.24) N referred to as nodes or grid points or knots. The discrete Fourier coefficients of a complex-valued function u in (0,21] with respect to these points are N-1 ūk = k=-N/2, ...,N/2-1. N (2.1.25) j=0 Due to the orthogonality relation I u(x;)e-ika; ? 1 2 N-1 1 N j=0 Σ e-ipt; == ={ if p = Nm, m = 0, +1, #2, ... otherwise,
The answer is Iu(xj)e-ikxj==12N-1{if p=Nm,m=0,±1,±2,…otherwise}.
Given set of points or knots,2πj/N, for j = 0,...,N-1, N referred to as nodes or grid points or knots.
And the discrete Fourier coefficients of a complex-valued function u in (0,2π] with respect to these points areūk=k=−N/2,...,N/2−1.
N\begin{aligned} &\text{Given a set of points or knots,}\\ &\frac{2\pi j}{N},\text{ for }j = 0,...,N-1,\\ &\text{referred to as nodes or grid points or knots.}\\ &\text{And the discrete Fourier coefficients of a complex-valued function u in }(0,2\pi]\text{ with respect to these points are}\\ &\overline{u}_k=\frac{1}{N}\sum_{j=0}^{N-1}u(x_j)e^{-ikx_j}=k=\frac{-N}{2},...,\frac{N}{2}-1. \end{aligned}Nūk=1Nj=0N-1u(xj)e−ikxj= k=−N/2,...,N/2−1.
The orthogonality relation is, Iu(xj)e-ikxj==12N-1{if p=Nm,m=0,±1,±2,…otherwise, Here is the step-by-step procedure to answer the above problem:
The discrete Fourier coefficients of a complex-valued function u in (0,2π] with respect to these points are:ūk=k=−N/2,...,N/2−1.
NThis can be represented as:ūk=1Nj=0N-1u(xj)e-ikxj= k=−N/2,...,N/2−1.The orthogonality relation is:Iu(xj)e-ikxj==12N-1{if p=Nm,m=0,±1,±2,…otherwise,Therefore, the answer is Iu(xj)e-ikxj==12N-1{if p=Nm,m=0,±1,±2,…otherwise}.
Know more about nodes here:
https://brainly.com/question/20058133
#SPJ11