When you punch the pack of ice, you notice that cold pack rapidly becomes quite cold. This is because, chemical reaction took place absorbing thermal energy from the pack.
What is the absorption of thermal energy?Chemical reactions that absorb energy are called endothermic. In an endothermic reactions, more energy is absorbed when the bonds in the reactants are broken than it is released when new bonds are formed.
The process in making the cold pack is the physical act of dissolving. When ammonium nitrate is dissolved in water, that process is endothermic and thus producing the cold pack. All the reaction absorb energy, for example thermal energy from heat for its activation.
To know more about thermal energy, refer
https://brainly.com/question/19666326
#SPJ4
a solid cylinder has a mass of 5 kg and a radius of 30 cm. a torque of 40 nm is applied to the cylinder. what will be its angular acceleration?
A solid cylinder has a mass of 5 kg and a radius of 30 cm. a torque of 40 Nm is applied to the cylinder, then its angular acceleration 177.77 m/s^2.
Torque is a measure of the force that can cause an object to rotate about an axis. Just as force is what causes an object to accelerate in linear kinematics, torque is what causes an object to acquire angular acceleration. Angular acceleration is a quantitative expression of the change in angular velocity per unit time.
Let T be the torque, I be the Inertia and a be the angular acceleration.
In the angular form of Newton's second law, rotational inertia replaces mass and torque (tau) replaces force. The relationship between angular acceleration and torque is true when an object's rotational inertia is constant.
F = ma
T= I x a (1)
and I = 1/2 x M x R^2
I = 1/2 x 5 x (0.3)^2 Kgm^2
According to equation 1
a = T/I
a= 40/0.225 = 177.777 m/s^2.
Therefore, angular acceleration is 177.77 m/s^2.
To learn more Torque visit :
https://brainly.com/question/14028632
#SPJ4
a phone cord is 4.89 m long. the cord has a mass of 0.212 kg. a transverse wave pulse is produced by plucking one end of the taut cord. that pulse makes four round trips (down and back) along the cord in 0.636 s. what is the tension in the cord? hint: four round trips is a total distance of eight lengths of the cord.
The tension in the given phone cord is 174.3 N.
Speed of the wave
v = fλ
v = (n/t) x 2L
v = (4/0.617) x (2 x 4.89)
v = 63.4 m/s
Tension on the rope
v = √T/μ
μ = 0.212/4.89 = 0.0434 kg/m
v² = T/μ
T = v²μ
T = (63.4)² X 0.0434
T = 174.3 N
the tension in the given phone cord is 174.3 N.
When two opposing pressures pull on a rope, string, or wire, the force communicated through the object is known as tension. The energy is pulled equally on the bodies at the ends by the tension force, which is applied over the entire length of the wire. The International System of Units (SI) uses newtons as the unit of tension measurement for transmitted forces, action-reaction pairs of forces, and restoring forces (or pounds-force in Imperial units).
Learn more about Tension here:
https://brainly.com/question/17073019
#SPJ4
Physics is hard and my brain hurts
(a) The frictional force acting on the 19 kg mass is 120.45 N.
(b) The largest angle that the incline can have so that the mass does not slide the incline is 39⁰.
What is the frictional force acting on the 19 kg mass?
The frictional force acting on the 19 kg mass is calculated by applying Newton's second law of motion as follows;
F = μFn
where;
μ is the coefficient of static frictionFn is the normal force on the 19 kg massThe normal force on the 19 kg mass is calculated as follows;
Fn = mg cosθ
where;
θ is the angle of inclination of the planeg is acceleration due to gravity = 9.8 m/s²F = μmg cosθ
F = 0.81 x 19 x 9.8 x cos(37)
F = 120.45 N
The largest angle that the incline can have so that the mass does not slide the incline is calculated as follows;
the net force on the block must be equal to zero
∑F(net) = 0
parallel force - force of friction = 0
mg sinθ - μmg cosθ = 0
mg sinθ = μmg cosθ
sinθ = = μ cosθ
μ = sinθ/cosθ
μ = tanθ
θ = arc tan(μ)
θ = arc tan(0.81)
θ = 39⁰
Learn more about frictional force here: https://brainly.com/question/4618599
#SPJ1
in what ways is the electricity generation from a solar panel different from producing electricity with a turbine generator that works on wind, water, natural gas, coal, etc?
The electricity produced by a solar panel differs from the power produced by the a centrifugal compressor that runs on wind, liquid, oil and gas, coal, etc. by using solar and wind energy.
What are the 4 types of electricity?These days, it even fuels a lot of our automobiles. You may go to the most remote regions of the planet and still discover it in the stormy clouds above you. Different sources of electricity exist, including coal, freshwater, solar, wind, nuclear, hydro, and solar.
What is electricity made of?Based on the U.S. Energy Information Administration, lignite, nuclear power, and natural gas made up the majority of the country's electrical generation in 2020. Renewable energy sources like wind, hydro, solar power, biomass, and wind are also used to produce electricity.
To know more about electricity visit:
brainly.com/question/29640120
#SPJ4
7. the fact that voltage can be created by exerting force on a crystal is used for which type of sensor?
A knock sensor is used where voltage is created by exerting force on a crystal.
What is a force?A force is a pushing or pulling that an object feels as a consequence of engaging with another thing. Every time two objects contact, a force is applied to everything in the system. When the interaction is finished, the force is no more sensed by the two objects. Forces are merely interactions; they do not exist in isolation.
what does a sensor do and what are some examples?A sensor is a tool that collects physical information from its surroundings and transforms it into information that can be used by either a machine or a human to understand. Most sensors (which transform the data into electronic data) are electronic, but some are simpler, such as a glass thermometer that displays visual data.
To know more about sensors visit:
https://brainly.com/question/15396411
#SPJ4
what is the acceleration of a car that starts at 0 and goes to 45mph in 5 seconds
The acceleration of the car will be 9m/s2.
What is acceleration?Acceleration is the rate of change in velocity. Involves a change in speed and direction. When acceleration involves a change in speed only: Positive acceleration it occurs when an object speeds up. Negative acceleration occurs when an object slows down. Acceleration is a change of velocity over a period of time.
Using the formula;
[tex]a = \frac{v-u}{t}[/tex]
v = final velocity (45mph)
u = initial velocity (0)
t = 5 seconds
[tex]a = \frac{45 - 0}{5}[/tex]
a = 9m/s2.
In conclusion, the acceleration of the car will be 9m/s2.
Learn more about acceleration:https://brainly.com/question/460763
#SPJ1
The acceleration of the car moving with a velocity of 13.37m/s in 5s is 2.67m/s²
What is acceleration?Acceleration is the rate of change of velocity with time. It is the measure how fast velocity changes in meters per second squared (m/s^2). Acceleration is a vector quantity.
Acceleration = change in velocity/ time
therefore a= (v-u)/t
where v = final velocity and u= initial velocity, t is the time
since 1meter = 0.000621miles and 60×60 seconds is 1hour, then
45 mph to m/s is 45×1609.344/60×60
= 48120.48/3600= 13.37m/s
a= (13.37-0)/5
a= 13.37/5
a= 2.67m/s²
therefore the acceleration of the car is 2.67m/s²
learn more about acceleration from
https://brainly.com/question/460763
#SPJ1
how much heat (in kj) is required to warm 15.0 g of ice, initially at to steam at . the heat capacity of ice is , and that of steam is .
The ice must be warmed with 4.719 kJ of heat.
How do you calculate heat to melt ice?Let's have a look at the energy required to melt one kilogramme of ice at absolute zero to create one kilogramme of water at absolute zero. We determine that Q = mLf = (1.0 kg)(334 kJ/kg) = 334 kJ is the energy required to melt a kilogramme of ice using the equation for a change in temperature and the value for water from Table 1.The quantity of heat energy required to transform materials from a solid to a liquid is known as the heat of fusion (melting.)The heat of fusion calculation formula is q = mHf.2090 Joules/kg C is the specific heat of ice.Given data :
The mass of ice is, m = 10.0 g.The initial temperature is, T = - 10 degree Celsius.The final temperature is, T' = 110.0 degree Celsius.The heat capacity of ice is, c = 2.09 J/g C.The heat capacity of steam is, c' = 2.01 J/g C.When ice absorbs heat, the conversion takes place from ice to water (liquid) and from the liquid to steam at 110 degree Celsius. So,
The amount of heat absorbed is given as,
Q = m[c(T' - T) + c'T']
Q = 10 [ 2.09 ( 110 - ( -10) + ( 2.01 x 110) ]
Q = 4719 J
Convert in kJ as,
Q = 4719/1000
Q = 4.719 kJ
Thus, we can conclude that the amount of heat required to warm the ice is 4.719 kJ.
Learn more about calculate heat to melt ice refer to :
https://brainly.com/question/26549639
#SPJ4
what is the minimum thickness of film required? assume that the wavelength of the light in air is 480 nanometers.
Assuming a wavelength of 500 nm for light in air, the minimum film thickness required is 83.9 nm.
How do you calculate destructive interference?refractive index of polystyrene; η_p = 1.49
Refractive index of fablite; η_f = 2.409
The wavelength of light in air is 500nm.
To answer this question, we know that light is first reflected twice.
Once from the top coating layer and once from the contact between the coating and the polystyrene material.
The additional path of light in the coating is 2t, but the path difference is 2tp. Therefore, the minimum required film thickness is given by the formula used in destructive interference, namely 2tη_p = λ/2.
t = λ/2 * 1/2η_p
t = λ/(4η_p)
t = 500/(4 * 1.49)
t = 83.9 nm
So, assuming a wavelength of 500 nanometers for light in air, the minimum required film thickness is: 83.9 nanometers
The full question is:
A thin polystyrene film is used as an anti-reflection coating on fablites (known as substrates). Polystyrene has a refractive index of 1.49 and fablite has a refractive index of 2.409. What is the minimum film thickness required? Suppose the wavelength of light in air is 500 nanometers.
For more information on destructive interference, see:
Brainly.com/question/23594941
#SPJ4
in each of the four scenarios shown in the images, a large bat lets out a short burst of ultrasonic sound, which a smaller bat hears a moment later. if the large bat flies at 3.750 m/s and the small bat flies at 13.60 m/s , order the frequencies that the smaller bat detects in the four scenarios from highest to lowest. assume that the speed of sound is 343.0 m/s . a. the large bat is on the left and is flying to the right. the small bat is on the right and is flying to the right. b. the large bat is on the left and is flying to the left. the small bat is on the right and is flying to the right. c. the large bat is on the left and is flying to the right. the small bat is on the right and is flying to the left. d. the large bat is on the left and is flying to the left. the small bat is on the right and is flying to the left.
The frequency from highest to lowest will be C, A, D, B
Given,
Velocity of large bat = 3.750 m/s
Velocity of small bat = 13.60 m/s
Speed of sound = 343 m/s
Frequency of initial signal = 40.20 kHz
To find,
Frequency heard by small bat in scenario C is
f' = f(V +V₀) / V - V(s)
f' = (40.2)(343 + 2.54) / (343 - 15.2)
f' = 42.3755 Hz
The reflected wave heard by large bat is
f'' = f'(V + V₀) / V - V(s)
f'' = (42.3755)(343 + 15.2) / (343 - 2.54)
f'' = 44.5836 kHz.
Therefore, the total sound frequency of the two bats is 44.5836 kHz and the order of sound frequencies of the bats are C, A, D, B.
To learn more about frequency, refer: https://brainly.com/question/14233442
#SPJ4
bilingual children and adults outperform others on tests of inhibition, sustained and selective attention, flexible thinking, analytical reasoning, concept formation, and false-belief understanding. the benefits of sustained bilingual education have inspired u.s. educators to devise two-way programs. these programs are growing rapidly in u.s. public schools.
Literature suggests that bilingual immersion programs are beneficial for elementary school students. Because this program will help fill the grade gap for elementary school students improve their academic performance and embrace their culture and new ones.
Bilingual education means teaching subjects in two different languages. It can be easily applied to help students transition from their native language to the language of the country in which they currently live, but can also be used to teach academic content in two languages at the same time.
Students can connect effectively with people from different cultures and backgrounds improve their ability to empathize with others and develop emotional intelligence. Teachers and students can use her two languages. One is the target language to learn and the other is the native language to reach the target language English.
Learn more about Bilingual education here:-https://brainly.com/question/520132
#SPJ4
dsl achieves high throughput over regular telephone lines by using data modulation techniques at the physical layer of the osi model.
Equal download and upload speeds are provided by symmetric DSL (SDSL), which evenly divides the upstream and downstream frequencies.
2 Mbps may be available both upstream and downstream on this connection. Small businesses typically favor it.You won't need to invest in pricey phone system modifications because a DSL connection uses your current telephone wiring.Cost-Effective - DSL internet offers the best connectivity and is a very cost-effective method.DSL modems are offered by the service providers.Users are able to utilize the internet and telephone lines simultaneously. And the reason for that is that voice and digital signals utilize different frequencies to be sent.
To know more about DSL
https://brainly.com/question/15901869
#SPJ4
two slits are illuminated with green light with a wavelength of 540 nm. the slits are 0.05 mm apart and the distance to the screen is 1.5 m. at what distance (in mm) from the central maximum on the screen is the average intensity 50% of the intensity of the central maximum?
The distance (in mm) from the central maximum on the screen is the average intensity 50% of the intensity of the central maximum is 0.21486 mm
What is the central maximum?
The brightest central area of a diffraction pattern on the screen is called the central maximum. Of all the other diffraction fringes, the central maximum is the widest and has the highest intensity.
The formula for maximum intensity is :
I = I_o•cos²(Φ/2)
Φ not given but it can be expressed as :
Φ = πdy/(λL)
Where;
y - distance from the central maximum
d - distance between the slits
λ - wavelength
L - distance to the screen
Hence, the answer is The distance (in mm) from the central maximum on the screen is the average intensity 50% of the intensity of the central maximum is 0.21486 mm.
To learn more about central maximum, follow the link:
https://brainly.com/question/29678814
#SPJ4
the magnet in a large mri unit may have a 0.7-t magnetic field occupying a field of 1.3 m^3. how much magnetic field energy is in that volume
397887.358 is the volume in which the magnetic field energy is said to be present.
What is magnetic field and its unit?The magnetism is a field that is produced in the vicinity of a magnetic dipole or a moving charge. Tesla is the SI unit of field strength for magnetic fields (T). The region surrounding a magnet where electromotive flux is felt is known as the magnetic field.
What materials make up a magnetic field?Electric fields in motion create magnetic properties. Everything is constructed of molecules, and each atom contains a nucleus that is composed of protons and neutrons, with electron cloud. Each atom creates a tiny magnetic field because the circling electrons have tiny moving charges.
Briefing:Required Energy = (B²/2μ)*Volume
= 1²/(2 * 4* π *10⁻⁷)
= 397887.358
To know more about Magnetic field visit:
https://brainly.com/question/23096032
#SPJ4
What can happen to solar radiation when it enters Earth’s atmosphere?
It is reflected by the surface of the Earth, reflected by clouds, and upper atmosphere.
What is Earth-Atmosphere Energy?The energy balance between the earth and atmosphere is reached when the energy from the Sun equals the energy that is lost by the Earth back into space. When it reaches the Earth, a portion of it is absorbed by the atmosphere, a portion is reflected back into space by clouds, and a portion is absorbed at the planet's surface. The Earth emits lesser (long wavelength) infrared light than the Sun because it is much cooler than otherwise.
The various surfaces that the solar radiation comes into contact with provide it the opportunity to undergo a variety of varied experiences. When solar radiation strikes the Earth, some of it is absorbed by the planet and some is reflected back into space.
To know more about Earth-Atmosphere, visit:
https://brainly.com/question/11993287
#SPJ1
if two objects, a and b, of different temperatures come into direct contact, what is the relationship between the heat lost by one and the heat gained by the other? what is the relationship between the temperature changes of these two objects?
The heat lost by one object is equal to the heat gained by the other.
What is heat?
heat is the energy that moves from one body to another when temperatures are different. Heat flows from the hotter to the colder body when two bodies with various temperatures are brought together. Usually, but not always, this energy transfer results in a rise in the temperature of a colder body and a fall in the temperature of a hotter body. By transitioning from one physical state (as well as phase) to another, such as from a phase from solid to liquid (melting), from the a solid to the a vapour (sublimation), from the a liquid to a vapour (boiling), either from one solid form to another, a substance can absorb heat without increasing in temperature.
This is because of the law of conservation of energy, which states that energy cannot be created or destroyed. As a result, the temperature of both objects will change until they reach the same equilibrium temperature. This is known as the law of thermal equilibrium, which states that the temperature of any two objects in thermal contact will eventually reach the same temperature.
To learn more about heat
https://brainly.com/question/934320
#SPJ4
the temperature is increased from 20°c to 100°c. by what factor does the rms speed of an ideal molecule change?
In version 1.1, the temperature is raised to 100°C from 20°C. what variable affects the ideal molecule's rms speed.
What is temperature and what is its unit in physics?The kelvin is the fundamental unit of heat in the European System of Units (SI). Its identifier is K. The Celsius measure, in which 0 degrees corresponds approximately to the freezing temperature and 100 degrees to its boiling temperature at sea level, is frequently practical for use in common applications.
Briefing:Create the equation for the gas's RMS speed.
Vrms = [tex]\sqrt{3RT}/M[/tex]
In this case, R stands for the air constant, T for temperature, and M for molecular size.
The numerator of the temperature is approximately equal to the RMS speed of both the gas, according to the expression above.
(Vrms)₁/(Vrms)₂ = [tex]\sqrt{T1}[/tex]/[tex]\sqrt{T2}[/tex]
= [tex]\sqrt{20+273 K}[/tex]/[tex]\sqrt{100+273 K}[/tex]
= [tex]\sqrt{293 K}[/tex]/[tex]\sqrt{373 K}[/tex]
= 0.886 (Vrms)₂
= 1.12 (Vrms)₁
The complete question is-
If the temperature of a gas is increased from 20°C to 100°C, by what factor does the rms speed of an ideal molecule change?
A) 1.1
B) 1.3
C) 2.2
D) 1.6
To know more about Temperature visit:
https://brainly.com/question/1977887
#SPJ4
what is the magnitude of the cross product of a vector of magnitude 2.00 m pointing east and a vector of magnitude 4.00 m pointing 30.0° west of north?
The magnitude of the cross product of both the given vectors is 6.91.
Given that, the magnitude of first vector is 2m and is pointing east
a = 2 (cos 0° i + sin 0° j) = 2 i
The magnitude of second vector is 4m pointing 30° west of north.
b = 4 (-cos 30° i + sin 30° j) = -4* 0.866 i + 4* 0.5 j = -3.46 i + 2 j
The total angle between a and b is 120°. (as one vector is on the east and the other is 30° west of north.
The formula for the cross product of two vectors is given by,
a × b = |a| |b| sinθ
where, |a| is the determinant of a
|b| is the determinant of b
θ is the angle between a and b
|a| = √(2)² = 2
|b| = √(-3.46)² + (2)² = 3.99
a × b = |a| |b| sinθ = 2* 3.99* sin 120° = 7.98* sin 120° = 6.91
Thus, the magnitude of cross product is 6.91.
To know more about cross product:
https://brainly.com/question/21879742
#SPJ4
A person can see clearly up close but cannot focus on objects beyond 80.0 cm. She opts for contact lenses to correct her vision. (a) Is she nearsighted or farsighted? (b) What type of lens (converging or diverging) is needed to correct her vision? (c) What focal length contact lens is needed, and what is its power in diopters?
A person who can see clearly up close but cannot focus on objects beyond 80.0 cm is nearsighted and she is needed diverging type of lens to correct her vision. 1.25focal length contact lens is needed, and −1.25 D is its power in diopters.
What is nearsightedness?Myopia or nearsightedness , a disease that affects many people, causes near objects to appear clear while far distant objects to appear blurry.
According to given data :
The distance she can she is 80 cm=0.8 m
She needs to correct it to the distinct vision=infinity.
To find the power of the lens
Use the following formula
⇒ 1/-0.8-1/∞=1/d
⇒ 1/d=-1.25
⇒ P = 1/d
⇒ P=−1.25 D
Now to find the focal length we know that P=1/f
Hence,
⇒ f=1/P
⇒ f=1/-1.25
⇒ f=1.25
Hence 1.25focal length contact lens is needed, and −1.25 D is its power in diopters.
Hence, a person who can see clearly up close but cannot focus on objects beyond 80.0 cm is nearsighted (Myopia) and she is needed diverging type of lens to correct her vision. 1.25focal length contact lens is needed, and −1.25 D is its power in diopters.
To know more about Nearsightedness visit
https://brainly.com/question/14299581
#SPJ4
what is the work requird to lift a 215 kg mass a distance of 5.65 m using a machine that is 72.5% efficient?
The maximum work required by the machine is 16420 J.
What is work?Work is energy transferred to or from an object via the application of the force along with the displacement. Work is the standard mechanical quantity. In its simple form, for a constant force aligned with it direction of motions the work equals the product of the forced by the strength and to the distance traveled.
Here mass M is 215 kg
And the height lifted H is 5.65
The energy or workdone needed to lift is W= MgH = 215(9.8)(5.65)= 11904.5 J
The minimum efficiency of to the machine is 72.5 %
So we can write that
The workdone by machine is
11904.5(100/72.5) = 16420 J ( approx)
So the workdone by machine is 16420 J
To know more about work click-
https://brainly.com/question/25573309
#SPJ1
a 1.5 kg 1.5 kg ball rotates on the end of a 3 m 3 m string in a vertical circle with a speed of 7 m/s 7 m/s. what force does the ball exert on the rope at the top of the vertical circle?
The ball pulls on the rope with a force of 24.5 N. Force is an outside factor that has the power to alter an object's motion or velocity.
It can also be explained as the result of acceleration and mass.
Mathematically, the ball's mass is 1.5 kg and force F = m*a.
3 meters is the circle's radius.
The ball rotates at a speed of 7 m/s.
The ball is subject to centripetal force since it is rotating in a vertical circle.
A rotating object experiences centripetal force, which is different from gravitational force, which is zero in a vertical circle.
Centripetal force has the formula Fc = mv2/r.
Fc = 1.5 * (7)²/ (3) (3)
Fc = 24.5 N
At the top of the vertical circle, there is a 24.5N force applied by the ball to the rope.
Learn more about force here-
https://brainly.com/question/13191643
#SPJ4
which sentence describes newton's second law
according to the socioemotional selectivity theory, recently retired joyce will likely seek familiar social contacts that reinforce all of these except:
According to the socioemotional selectivity theory, recently retired joyce will likely seek familiar social contacts that reinforce all of these except: Joy
What is socioemotional selectivity theory?
The Socio-Emotional Selectivity Theory (SST; developed by psychologist Laura L. Carstensen at Stanford University) is a lifelong motivational theory. According to this theory, as time spans shorten, as usually happens with age, people become increasingly selective and invest more resources in emotionally meaningful goals and activities. Changes in motivation also affect cognitive processing. Aging is associated with a relative preference for positive information over negative information among people who have formed rewarding relationships. This selective narrowing of social interactions maximizes positive emotional experiences and minimizes age-related emotional risks for individuals. According to this theory, older adults systematically strengthen their social networks to ensure that available social partners meet their emotional needs.
This theory also focuses on the types of motivations individuals seek to achieve. Knowledge-related goals cover knowledge acquisition, career planning, building new social relationships, and other endeavors that will yield results in the future. Emotion-related goals are aimed at regulating emotions, seeking emotionally satisfying interactions with social partners, and other pursuits whose benefits are currently realizable.
Thus, According to the socioemotional selectivity theory, recently retired joyce will likely seek familiar social contacts that reinforce all of these except: Joy
To know more about socioemotional selectivity theory, check out:
https://brainly.com/question/7546236
#SPJ4
A car battery is rated at 40 Ah. In theory, how long does this suggest the battery could light a headlamp bulb which draws 2 A from the battery?
The battery will light the headlamp bulb for 20hours
What is battery run time?A battery run time is the total time in hours that a battery can sustain a certain power output.
Battery run time can also be defined as the ratio of the battery capacity in( Ah) and the current of the load in( A) i.e
Battery Life (in hours) = Battery Capacity (in Ah) / Load Current (in A).
The battery capacity is 40Ah and the the load takes a current of 2A
therefore the time it will take the battery to run out is
40/2= 20hours
learn more about battery run time from?
https://brainly.com/question/26064897
#SPJ1
true or false: the eye is spherical, measuring about 5 centimeters in diameter, and most of it is receded into the orbit of the skull.
The answer to this question is false. The eye of an adult is about 21 mm to 27 mm in total length and width.
What is dry eye?Tears may be insufficient and unsteady. The discomfort of dry eyes is felt. The stinging or burning of your eyes could be a sign of dry eyes.
On an airplane, in an air-conditioned room, while riding a bike, or after staring at a computer screen for a while, are a few examples of scenarios when you could get dry eyes.
You may feel more comfortable using treatments for dry eyes. Changes in lifestyle and eye drops are two possible treatments.
To manage the signs of dry eyes, you'll probably need to keep up with these precautions indefinitely.
To know more about dry eyes, visit:-
https://brainly.com/question/28482060
#SPJ4
a 64 kg person rides in an elevator. if the elevator has a downward acceleration of 3.0 , what is the magnitude of the force of the person on the elevator floor?
The magnitude of the force if the of the person in the elevator is 448N
What is the apparent weight of a body in elevator?A body in an elevator will experience apparent weight. The motion of the elevator will decide if the actual weight of the body will increase or decrease.
When a body is moving upward with acceleration a, the apparent weight of the body will be R= m(a+g)
Also when the body is moving downward with acceleration a, the apparent weight will be R = m(a-g)
The apparent weight of the body will be actual weight when the elevator is at rest or at uniform velocity i.e a=0 and R= mg
Therefore,
For a body in a elevator with downward acceleration, it's apparent weight/force on the person is R= m(g-a)
R= 64(10-3)
R= 64×7= 448N
learn more about apparent weight in elevator from
https://brainly.com/question/7030391
#SPJ1
A group of students were investigating the force of gravity. They began by dropping a foam ball from a height of 3 meters into a bucket of sand. The ball hit the sand in 0. 306 seconds. They dropped additional balls of approximately the same diameter, but of different masses. Here is the data they collected. Based on this experiment and the collected data, what would their conclusion be?.
Based on this experiment and the collected data, their conclusion be: mass becomes a factor affecting speed of a falling object when it is dropped at a great distance from the surface of the Earth
What is gravitational force?Gravitational force is that type of force by which an object attracts other objects into its center of mass. We are able to stand on the ground because of the gravitational pull of earth.
The force of gravitation depends on the mass of the object : as mass increases then the speed of the falling object also increases because it experiences more gravitational pull from earth.
Here, ball with greater mass hit the ground with less time as compared to the one with lesser mass.
To know more about force of gravity, refer
https://brainly.com/question/2537310
#SPJ4
A proton and an electron are placed in an electric field. Which undergoes the lesser acceleration?.
An Electron will undergoes the lesser acceleration
What is Proton and Electron ?An electron is a negatively charged particle of equivalent magnitude to a proton, which is positively charged. Therefore, they will feel the same amount of electric force when exposed to an electric field. As a result, the relationship between acceleration and mass will be inverse. An electron will accelerate more quickly than a proton because an electron has a lower mass.
Due to their opposite polarity, an electron and a proton are attracted to one another by an electrical force of equal strength when they are placed in an electric field. However, because of their opposing charges, the force will act in the opposite direction.
Learn more about Electron here:
https://brainly.com/question/860094
#SPJ4
serenity asks carlos what conditions are needed to observe interference of waves from two sources. which responses are correct? (select all that apply.)
The sources of the waves must be coherent, which means they emit identical waves with a constant phase difference. The waves should be monochromatic - they should be of a single wavelength.
What is interference of waves ?In physics, interference is the overall result of two or more wave trains travelling in parallel or converging directions. At each place impacted by many waves, the effect is that of adding the individual wave amplitudes.
Interference comes in two flavours positive interference and destructive interference. Additionally, when wave amplitudes reinforce one another and cause an increase in wave amplitude, constructive interference occurs.
Learn more about interference of waves here:
https://brainly.com/question/2166481
#SPJ4
ssm a 140 kg hoop rolls along a horizontal floor so that the hoop’s center of mass has a speed of 0.150 m/s. how much work must be done on the hoop to stop it?
The work needed to stop the hoop is -3.15j.
What is hoop?
In rhythmic gymnastics, a hoop is indeed an apparatus that can be made of plastic as well as wood as long as it maintains its shape throughout the routine. The hoop's interior diameter ranges from 20 to 35 inches, and its weight must be at least 300 grammes (11 oz). The hoop could be a natural colour or partially or entirely covered in one or more colours. It may also be covered to adhesive tape that is either the same colour as the hoop or a different colour. Rotation all around hand or body, rolling, swings, circles, throws, as well as passes through and across the hoop are all fundamental components of a hoop routine.
The work needed to stop the hoop can be calculated as follows:
Work = Force x Distance
Force = Mass x Acceleration
Mass = 140kg
Acceleration = Velocity / Time
Velocity = 0.150 m/s
Distance = Velocity x Time
Time = Velocity / Acceleration = 0.150 m/s / 0.150 m/s = 1 second
Therefore,
Work = (140 kg x 0.150 m/s) x 0.150 m/s = 3.15j
The work needed to stop the hoop is -3.15j.
To learn more about hoop
https://brainly.com/question/29558785
#SPJ4
what is the kinetic energy of the object on the spring when the spring is compressed 3.2 cm from its equilibrium position? express your answer in joules using three significant figures.
The kinetic energy of the object on spring is 2.56 Joule.
The spring compressed at 3.2 cm from equilibrium position.
When you compress or stretch a spring, you can measure the amount of potential and kinetic energy it stores. The force, F, multiplied by the distance, s:, results in what is known as elastic potential energy.
W = Fs.
The force varies as you stretch or compress a spring, but it does so linearly (according to Hooke's law, force is proportional to displacement)
Applying force requires work, and once the work is finished, energy is transferred to the object, causing it to move with a constant speed.
When an object is set in motion, its mass and speed determine the amount of energy that is transferred, which is known as kinetic energy.
K=0.5
[tex]dK=\frac{Sy^2}{2} \\\\dK=kinetic \\S=constant\\y=compression[/tex]
[tex]dK=0.5 [3.2^2]/2\\\\dK=2.56Joule[/tex]
To know about kinetic energy-
https://brainly.com/question/26472013
#SPJ4