During burning, elements in the coal are converted to compounds called oxides.
An oxide is a compound formed by combination of an element with oxygen. Usually, when an element is burnt in oxygen, it combines with oxygen in the presence of heat to form oxides.
Coal contains carbon, nitrogen and sulfur. When coal is burnt, these elements combine with oxygen to form oxides. The products of combustion of coal are oxides of sulfur, oxides of carbon and oxides of nitrogen.
Learn more: https://brainly.com/question/2673886
Aqueous hydrochloric acid will react with solid sodium hydroxide to produce aqueous sodium chloride and liquid water . Suppose 14. g of hydrochloric acid is mixed with 6.55 g of sodium hydroxide. Calculate the minimum mass of hydrochloric acid that could be left over by the chemical reaction. Round your answer to significant digits.
Answer:
8.02 g of HCl could be left over by the chemical reaction
Explanation:
We propose the reaction:
HCl(aq) + NaOH (s) → NaCl (aq) + H₂O (l)
Ratio is 1:1. First of all, we determine the moles of reactants:
14 g . 1mol / 36.45g = 0.384 mol of acid
6.55 g. 1mol / 40g = 0.164 mol of base
If a determined mass of HCl, could be left; this means that the acid is the excess reagent.
For 0.164 moles of NaOH, we need 0.164 moles of HCl.
As we have 0.384 moles, (0.384 - 0.164) = 0.220 moles of acid are left over in the reaction. We convert the moles to mass:
0.220 mol . 36.45 g /1mol = 8.02 g
A careless student forgets to label one of their reagent containers. They know it contains one of the following solutions: 0.1 M NaCl, 0.1 M Ca(NO3)2, 0.1 M KCH3COO The student decides to add some 0.1 M Pb(NO3)2 to a sample of the reagent in question. Upon stirring, a white precipitate formed. Which of the possible solutions was present in the unlabeled container based on this observation
Answer:
He kinda lazy ngl
Explanation:
Rgheeghfgufugf
How much energy is required to remove a neutron from the nucleus of an atom of carbon-13?
Answer:
uh i think 12?
Explanation:
Rotation about C-C single bonds allows a compound to adopt a variety of _____________. conformations configurations formations isomers projections are often used to draw the various conformations of a compound. conformations are lower in energy, while conformations are higher in energy. The difference in energy between staggered and eclipsed conformations of ethane is referred to as strain. strain occurs in cycloalkanes when bond angles deviate from the preferred °. The conformation of cyclohexane has no torsional strain and very little angle strain. The term "ring flip" is used to describe the conversion of one conformation into the other. When a ring has one substituent the equilibrium will favor the chair conformation with the substituent in the position.
Answer:
Conformation
Explanation:
Conformation refers to "any of the spatial arrangements which the atoms in a molecule may adopt and freely convert between, especially by rotation about individual single bonds"(Oxford dictionary).
Carbon-Carbon single bonds are known to undergo rotations about its axis. These rotations leads to various conformations. The energy difference between conformations may be low or high depending on the structure of the molecule. The difference in energy between conformations determines a molecules's preferred conformation.
Based on your understanding of color's relationship to wavelength, identify the approximate wavelength of light (nm) emitted by strontium when it was burned in Part C. (No quantitative data was collected for this; you are giving an approximate value only, based on what you observed.) Explain your reasoning in full, making sure to cite specific data and observations to support your answer.
Answer:
The flame colour of strontium is red. Red has a wavelength of around 620 to 750 nm.
Explanation:
Visible light is part of the electromagnetic spectrum. The electromagnetic waves are composed of electric and magnetic fields.
The visible spectrum is composed of seven different wavelengths that corresponds to different colours. When a metallic element is exposed flame, one of these colours is observed. This is commonly called the flame test.
The flame colour of strontium is red. Red has a wavelength of around 620 to 750 nm.
The approximate wavelength of light (nm) emitted by strontium when it was burned is red, where red has a wavelength of round 620-750 nm.
Wavelength of light emitted by strontiumGenerally, Visible mild is phase of the electromagnetic spectrum. the electromagnetic waves are composed of electric powered and magnetic fields. When a metal factor is uncovered flame, one of they seven colors of visible spectrum is seen.
The flame shade of strontium is red, where red has a wavelength of round 620-750 nm.
For more information on Wave
https://brainly.com/question/3004869
Which statement is true about the speed of light? (2 points)
Light travels relatively slowly.
Distance in space is measured using the speed of light.
Time in space is measured using the speed of light.
The speed of light is unknown
Answer:
2nd option is the correct answer of this question
Answer:
yes it is b
Explanation:
54.1miles/gallons how many liters of gas will be consumed traveling 132 km
Answer:
5.75 L.
Explanation:
From the question given above, the following data were obtained:
Rate = 54.1 miles/gallons
Distance = 132 km
Volume (in L) consumed =?
Next, we shall convert 132 km to mile. This can be obtained as follow:
1 km = 0.621 mile
Therefore,
132 km = 132 km × 0.621 mile / 1 km
132 km = 81.972 mile
Next, we shall determine the volume (in gallons) of the gas needed. This can be obtained as follow:
Rate = 54.1 miles/gallons
Distance = 81.972 mile
Volume (in gallon) =?
Rate = Distance / volume
54.1 = 81.972 / volume
Cross multiply
54.1 × volume = 81.972
Divide both side by 54.1
Volume = 81.972 / 54.1
Volume = 1.52 gallon.
Finally, we shall convert 1.52 gallon to litre (L). This can be obtained as follow:
1 gallon = 3.785 L
Therefore,
1.52 gallon = 1.52 gallon × 3.785 L / 1 gallon
1.52 gallon = 5.75 L
Therefore, 5.75 L of the gas will be consumed.
What are metalloids?
A metalloid is a type of chemical element which has a preponderance of properties in between, or that are a mixture of, those of metals and nonmetals.
Answer:
Metalloid, in chemistry, an imprecise term used to describe a chemical element that forms a simple substance having properties intermediate between those of a typical metal and a typical nonmetal. There is no single property which can be used to unambiguously identify an element as a metalloid.
Which word best describes gamma rays?
A)Weak
B)Destructive
C)Visible
D)Harmless
Answer:
Explanation:
Destructive :D
According to the position of gamma rays in electromagnetic spectrum,the word which best describes gamma rays is destructive as they have high energy.
What is electromagnetic spectrum?The electromagnetic spectrum consists of electromagnetic radiation which consists of waves made up of electromagnetic field which are capable of propogating through space and carry the radiant electromagnetic energy.
The radiation are composed of electromagnetic waves which are synchronized oscillations of electric and magnetic fields . They are created due to change which is periodic in electric as well as magnetic fields.
In vacuum ,all the electromagnetic waves travel at the same speed that is with the speed of air.The position of an electromagnetic wave in an electromagnetic spectrum is characterized by it's frequency or wavelength.They are emitted by electrically charged particles which undergo acceleration and subsequently interact with other charged particles.
Learn more about electromagnetic spectrum,here:
https://brainly.com/question/23727978
#SPJ6
Copper(II) chloride hydrate, also known as copper chloride hydrate, is the inorganic compound with the chemical formula CuCl2 . x(H2O), where x can range from 1 to 7. A 2.060 g sample of copper (II) chloride hydrate was dissolved in 50.0 mL of deionized water. The concentration of copper (II) ion in the solution was determined spectrophotometrically using the equation from the calibration curve, was 0.200 M. Determine the formula of the copper (II) chloride hydrate.
Answer:
CuCl₂·4H₂O
Explanation:
First we calculate the moles of copper (II) ion in the solution, using the given volume and concentration:
50.0 mL ⇒ 50.0/1000 = 0.05 L0.05 L * 0.200 M = 0.01 mol Cu⁺²For each Cu⁺² mol there's also one CuCl₂ mol.
We convert 0.01 CuCl₂ moles into grams, using its molar mass:
0.01 CuCl₂ mol * 134.45 g/mol = 1.344 gThat means that out of the 2.060 g of the sample, 1.344 g are of CuCl₂. This means that there are (2.060 - 1.344) 0.716 g of water.
We convert those 0.716 g of water to moles:
0.716 g ÷ 18 g/mol = 0.04 mol H₂OThere are four times as many H₂O moles as there are CuCl₂ moles. This means the formula is CuCl₂·4H₂O
How many significant figures
are in this number?
3 x 10^6
Add one or more curved arrows to show the movement of electrons in the reaction. To draw the arrows, select More in the drawing menu, then select the appropriate curved arrow. Click on a bond or electron to start a curved arrow. Do not start from an atom. Use the select tool to move the arrow head and tail to the desired placement. When the curved arrow changes from red to black, your arrow has an appropriate starting and ending point. Draw curved arrows. Select Draw Rings More Erase С 0 heat -=-=- H3C—0. +.0—CH HCO CH, 2
Answer:
H3C - O - O - CH -HCOCH2.
Explanation:
Before chemical reaction can occur, some steps has to be followed in order to give the final product (s), this steps can be shown by drawing the chemical compound and showing how bonds are being broken or formed. Showing this in a stepwise manner is known as reaction mechanism.
From the question above, it is given that the products after heating the reactant gives H3C—0. +.0—CH HCO CH2.
The starting material can be deduce as;
H3C - O - O - CH -HCOCH2.
Heat causes something to divide or melt. Kindly check the attached picture which shows how the deduced starting compound splits to give H3C—0. and .0—CH HCO CH2.
Name this molecule c4h7bro
Answer:
I believe its : "2-Bromobutanal"
A chemical equation is balanced when the number of each
type of ____ is the same on both sides of the equation.
Answer:
element
Explanation:
In order to be in a position to manipulate any operation, one has to know all the fine details of the system and where and how one might apply subtle changes to affect the outcome. When looking at chemical reactions, it is from the study of its kinetics that one gleams the insight necessary to be able to do this. The main use of chemical kinetics is to measure the speed of a chemical reaction. But more importantly, in measuring the speed of a reaction, one gains insight as to what part of the reaction imparts this speed (or lack thereof) and thus allows one to propose a specific mechanism that details the critical pathway for the reaction. Measuring the speed of a chemical reaction is very similar to measuring speed in general, except that instead of talking in terms of distance traveled per unit time we are measuring either reactants consumed per unit time or products produced per unit time. There are many factors that affect the speed of a chemical reaction, some of the more common ones being:
Answer:
See explanation
Explanation:
Chemical kinetics, the branch of physical chemistry that is concerned with understanding how fast or how slow chemical reactions occur (Encyclopedia Britannica).
The study of the kinetics of a chemical reaction is helpful in many ways. Most important is the fact that it allows one to propose a specific mechanism that details the critical pathway for the reaction.
The factors that affect the rate of chemical reaction includes; concentration of reactants, temperature, nature of reactants , the solvent used, the presence of a catalyst, presence of light, surface area of reactants and pressure for gaseous reactants.
If 27.37ml of 0.2115M NaOH is able to neutralize 37.45 of HCl, what is the concentration of the acid?
You just gotta match the moles:
moles of NaOH = 0.02737 L * 0.2115 M = 0.005789 mol of NaOH. The amount of moles of HCl it can neutralize should be the same since they are in a 1:1 ratio. Therefore, you can do moles of NaOH divided by 0.003745L to get the answer. It turns out to be 0.1546M.
Which would be another way to make the ice melt faster
Answer:
d because ur heating the ice and causing friction
When 9.00 g C6H12O6 burns with excess oxygen, how many grams
of CO2 will be made?
- 0.44 g
- 6.6 g
- 2.2 g
- 13.2 g
Question 6 of 10
Which law of motion states that an object's acceleration is directly related to
the net force applied and inversely related to the mass of the object?
O A. Newton's law of inertia
O B. Newton's second law
Ο Ο Ο
C. Newton's third law
OD. Newton's first law
4 points 15. The diagram below shows the relative positions of Earth, the moon, and the sun. The moon is shown at four possible positions around Earth. 3 Sunlight Sun Earth mo Which position of the moon could result in a lunar eclipse? В. 2 A B
Answer:
b c
Explanation:
Answer: b c
Explanation: i did test
Strontium chlorate is mixed with ammonium phosphate
Explanation:
Please, if I may ask, what is the exact question?
How does the average reaction rate differ from an instantaneous reaction rate?
a) The average reaction rate is how quickly the reaction proceeds at a specific time. An instantaneous reaction rate is how quickly the reaction proceeds over time.
b) The average reaction rate is how quickly the reaction proceeds over time considering the reactants. An instantaneous reaction rate is how quickly the reaction proceeds at a specific time considering the products.
c) The average reaction rate is how quickly the reaction proceeds over time. An instantaneous reaction rate is how quickly the reaction proceeds at a specific time.
d) The average reaction rate is how quickly the reaction proceeds over time. An instantaneous reaction rate is how quickly the reaction proceeds compared to another reaction.
Answer:
The average reaction rate is how quickly the reaction proceeds at a specific time. An instantaneous reaction rate is how quickly the reaction proceeds over time.
Explanation:
A student burned her magnesium sample according to the procedure and obtained a light gray product. Since the crucible looked dirty anyway, she skipped the steps to convert the Mg3N2 contamination to MgO, weighed the gray sample, and calculated the mass of her product. Was her resulting mass likely to be higher or lower the expected
Answer:
The resulting mass will be higher than expected
Explanation:
We have to keep this in mind; When magnesium is being burnt in air, two reactions are taking place. The first one is;
2Mg(s) + O2(g) ------> MgO(s) -------1
And
3Mg(s) + N2(g) -------> Mg3N2(s) ---------2
Now, if the steps that should be taken to convert Mg3N2 to MgO are not taken, the reaction is much quicker but a higher mass of solid is obtained than what was expected.
This higher mass of solid obtained owes to the fact that Mg3N2 from reaction 2 was not converted to MgO leading to contamination of the product.
Some hypothetical alloy is composed of 25 wt% of metal A and 75 wt% of metal B. If the densities of metals A and B are 6.17 and 8.00 g/cm3 , respectively, and their respective atomic weights are 171.3 and 162.0 g/mol, determine whether the crystal structure for this alloy is simple cubic, facecentered cubic, or body-centered cubic. Assume a unit cell edge length of 0.332 nm
Answer:
Simple cubic
Explanation:
The density of metal A (ρa) = 6.17 g/cm³, The density of metal B (ρb) = 8 g/cm³, The atomic weight of metal A (Aa) = 171.3 g/mol, The atomic weight of metal B (Ab) = 162 g/mol, the unit cell edge length (a) = 0.332 nm, concentration of metal A (Ca) = 25%, concentration of metal B (Cb) = 75%
The average density is given by:
[tex]\rho_{ave}=\frac{100}{\frac{C_a}{\rho_a} +\frac{C_b}{\rho_b} } \\\\\rho_{ave}=\frac{100}{\frac{25}{6.17} +\frac{75}{8} } =7.45\ g/cm^3\\\\The\ average\ atomic\ weight\ is:\\\\A_{ave}=\frac{100}{\frac{C_a}{A_a} +\frac{C_b}{A_b} } \\\\A_{ave}=\frac{100}{\frac{25}{171.3} +\frac{75}{162} } =164.23\ g/mol\\\\The\ number\ of\ atoms\ per\ unit(n)\ is:\\\\n=\frac{\rho_{ave}*a^3*N_A}{A_{ave}} \\\\N_A=Avogadro\ constant=6.02*10^{22} \ mol^{-1},a=0.332\ nm=3.32*10^{-8}cm\\\\Substituting:\\\\[/tex]
[tex]n=\frac{\rho_{ave}*a^3*N_A}{A_{ave}} =\frac{7.45*(3.32*10^{-8})^3*6.02*10^{23}}{164.23} \\\\n=0.999\\[/tex]
n≅1
Since n≅1, the crystal structure for this alloy is simple cubic
what causes deep ocean currents to flow
Answer:Deep ocean currents (also known as Thermohaline Circulation) are caused by: ... The sinking and transport of large masses of cool water gives rise to the thermohaline circulation, which is driven by density gradients due to variations in temperature and salinity. The earth's rotation also influences deep ocean currents.
Explanation:
Choose all true statements about the water molecule: Choose all true statements about the water molecule: Bonding between the oxygen and hydrogen within the molecule happens due to hydrogen bonding. Water is a permanent electric dipole, having permanent charge separation. Water is not naturally polarized, and gets polarized only due to external electric forces.
Answer: Water is a permanent electric dipole, having permanent charge separation.
Explanation:
Hydrogen bonding is an intermolecular force having partial ionic-covalent character.
In [tex]H_2O[/tex], O is a highly electronegative atom attached to a H atom through a covalent bond. The oxygen atoms being more electronegative gets partial negative charge and H atom gets partial positive charge. Thus water is permanent electric dipole.
Hydrogen bonding takes place between a hydrogen atom (attached with an electronegative atom O) and an electronegative atom (O).
The true statement about water molecules are Bonding between the oxygen and hydrogen within the molecule happens due to hydrogen bonding and water is a permanent electric dipole, having permanent charge separation.
What are hydrogen bonds?Hydrogen bonds is a kind of attraction force which is present between the more electronegative atom and hydrogen atom.
In water molecule, 2 hydrogen atoms and one oxygen atom is present and between the more electronegative oxygen atom and hydrogen atom, hydrogen bond is present.And due to electronegative nature of oxygen atom, they withdraw all the electron density of the bond towards itself as a result of which it possesses permanent electric dipole. Because partial negative charge is present on oxygen atom and partial positive charge is present on the hydrogen atom.Hence options (1) and (2) are correct.
To know more about water molecule, visit the below link:
https://brainly.com/question/24647400
The decomposition of N2O to N2 and O2 is a first-order reaction. At 730°C, the rate constant of the reaction is 1.94 × 10-4 min-1. If the initial pressure of N2O is 3.50 atm at 730°C, calculate the total gas pressure after one half-life. Assume that the volume remains constant. Insert your answer in decimal notation rounded to 3 significant figures.
Answer:
the total gas pressure after one half-life is 4.38 atm
Explanation:
The balanced equation for the decomposition of N2O to N2 and O2 is given as:
2N₂O(gas) ⇒ 2N₂(gas) + O₂(gas)
2 moles of N₂O produce 2 moles of N₂ and 1 mole of O₂
The change in pressure depends on the coefficient (number of moles) of the reactant and product.
N₂O N₂ O₂
number of moles 2 2 1
Initial pressure (atm) 3.50 0 0
change in pressure -2x +2x x
Final pressure (atm) 3.50 - 2x 2x x
The total final pressure is the sum of the individual total pressure. i.e.:
Total final pressure = final pressure of N₂O + final pressure of N₂ + final pressure of O₂
Total final pressure = (3.5 - 2x) + (2x) + x
Total final pressure = 3.5 + x
After one half life, the initial pressure of N₂O would be half its value.
Final pressure of N₂O = half of the initial pressure of N₂O
3.5 - 2x = 0.5(3.5)
3.5 - 2x = 1.75
2x = 1.75
x = 0.875 atm
Therefore, Total final pressure = 3.5 + x = 3.5 + 0.875
Total final pressure = 4.38 atm to 3 significant figures
Which of the following variables has the least effect on the rate a substance dissolved in a container of water?
A. The force of the stirring
B. The size of the container
C. The temperature of the water
D. The surface area of the substance
Look at the potential energy diagram below. What amount of energy does the products have ?
100
80
PE
50
AB
40
C D
20
Progress of the reaction
40 KJ
60 KJ
O 20 KJ
80 KJ
Answer:
20 kJ
Explanation:
The products are C + D which is on the right side of the diagram. And it says it has 20 kJ of energy.
In a reaction involving the iodination of acetone, the following volumes were used to make up the reaction mixture: 5 mL 4.0M acetone 5 mL 1.0 M HCl 5 mL 0.0050 M I2 10 mL H2O While keeping the total volume at 25 mL and keeping the concentration of H ion and I2 as in the original mixture, how could you double the molarity of the acetone in the reaction mixture
Answer:
Explanation:
pls give me point so i can ask questions