Answer:
C. $11,000
Explanation:
Calculation to determine what Grambling Company should report as a realized gain on the sale of stock in 2018
Using this formula
2018 Realized gain on the sale of stock =Selling price-Cost of securities
Let plug in the formula
2018 Realized gain on the sale of stock=
$226,000 -$215,000
2018 Realized gain on the sale of stock=$11,000
Therefore Grambling Company should report a realized gain on the sale of stock in 2018 of $11,000
Racing Bikes $929,000 $266,000 $409,000 254,000 Dirt Mountain Bikes Total Bikes Sales Variable manufacturing and selling 467,000 116,000 197,000 154,000 expenses Contribution margin Fixed expenses: Advertising, traceable Depreciation of special equipment Salaries of product-line managers Allocated common fixed expenses Total fixed expenses 462,000 150,000 212,000 100,000 70,200 44,000 115,900 185, 800 20,800 15,400 36,700 50,800 123,700 $ 46,100 $ 26,400 $43,400 $ (23,700) 8,800 40,600 7,600 38,600 81,800 168,600 21,000 40,600 53,200 123,600 415,900 Net operating income (loss) "Allocated on the basis of sales dollars Management is concerned about the continued losses shown by the racing bikes and wants a recommendation as to whether or not the line should be discontinued. The special equipment used to produce racing bikes has no resale value and does not wear out Required: 1. What is the financial advantage (disadvantage) per quarter of discontinuing the Racing Bikes? 2. Should the production and sale of racing bikes be discontinued? 3. Prepare a properly formatted segmented income statement that would be more useful to management in assessing the long-run profitability of the various product lines. Complete this question by entering your answers in the tabs below. Required 1 Required 2 Required 3 Prepare a properly formatted segmented income statement that would be more useful to management in assessing the long- run profitability of the various product lines. Totals Dirt Bikes Mountain Bikes Racing Bikes Sales Variable manufacturing and selling expenses Contribution margin (loss) 0 0 Traceable fixed expenses: Advertising, traceable Depreciation of special equipment Salaries of the product line managers Total traceable fixed expenses 0 0 0 Product line seament marain (loss) ol $
Answer:
Racking Bikes
1. The financial disadvantage per quarter of discontinuing the Racing Bikes is the loss of $27,100 product contribution made by the Racing Bikes towards offsetting the common allocated fixed costs.
2. No. The production and sale of the racing bikes should not be discontinued.
3. Segmented Income Statement:
Total Bikes Dirt Bikes Mountain Racing
Bikes Bikes
Sales $929,000 $266,000 $409,000 254,000
Variable manufacturing and
selling expenses 467,000 116,000 197,000 154,000
Contribution margin $462,000 $150,000 $212,000 $100,000
Traceable Fixed Expenses:
Advertising 70,200 8,800 40,600 20,800
Depreciation 44,000 21,000 7,600 15,400
Salaries:line manager 115,900 40,600 38,600 36,700
Total traceable
fixed expenses $230,100 $70,400 $86,800 $72,900
Product profit margin $231,900 $79,600 $125,200 $27,100
Explanation:
a) Data and Calculations:
Total Bikes Dirt Bikes Mountain Racing
Bikes Bikes
Sales $929,000 $266,000 $409,000 254,000
Variable manufacturing and
selling expenses 467,000 116,000 197,000 154,000
Contribution margin $462,000 $150,000 $212,000 $100,000
Traceable Fixed Expenses:
Advertising 70,200 8,800 40,600 20,800
Depreciation 44,000 21,000 7,600 15,400
Salaries:line manager 115,900 40,600 38,600 36,700
Allocated common
fixed expenses 185,800 53,200 81,800 50,800
Total fixed expenses $415,900 $123,600 $168,600 $123,700
Net operating income
(loss) $46,100 $26,400 $43,400 ($23,700)
The marketing decision and research problem should be defined clearly so that a. communication between the researcher and the decision maker can be reduced. b. research can be designed properly. c. the researcher knows what results to come up with. d. the decision maker understands the decision to be made. e. all of the above.
Answer:
b. research can be designed properly.
Explanation:
Market research can be defined as a strategic technique which typically involves the process of identifying, acquiring and analyzing informations about a business. It involves the use of product test, surveys, questionnaire, focus groups, interviews, etc.
Secondary market research can be defined as a method designed to determine the demographics of a particular target market.
The marketing decision and research problem should be defined clearly so that the research can be designed properly. Some of the factors to be considered in the design of a market research are;
I. Corporate culture.
II. The environment of the decision maker.
III. The decision maker's objectives.
Analyzing and Interpreting Restructuring Costs and Effects
General Electric (GE) reports the following footnote disclosure (excerpted) in its 2018 10-K relating to its restructuring program. Restructuring actions are an essential component of our cost improvement efforts to both existing operations and those recently acquired. Restructuring and other charges relate primarily to workforce reductions, facility exit costs associated with the consolidation of sales, service and manufacturing facilities, the integration of recent acquisitions, and other asset writedowns. We continue to closely monitor the economic environment and may undertake further restructuring actions to more closely align our cost structure with earnings and cost reduction goals. 2018 2017 2016 $0.9 $1.2 $1.3 1.8 1.9 1.3 Workforce reductions Plant closures & associated costs and other asset write-downs Acquisition/disposition net charges Other 0.8 0.8 0.6 0.1 0.2 0.3 Total $3.6 $4.1 $3.5 For 2018, restructuring and other charges were $3.5 billion of which approximately $1.4 billion was reported in cost of products/services and $2.1 billion was reported in selling, general and administrative expenses (SG&A). These activities were primarily at Power, Corporate and Oil & Gas. Cash expenditures for restructuring and other charges were approximately $2.0 billion for the twelve months ended December 31, 2018. (a) Which of the following in NOT an example of a common non-cash charge associated with corporate restructuring activities? Olnventory revaluations Severance paid to employees O Fixed-asset write-downs Olmpairment charges on intangible assets (b) Using the financial statement effects template, show the effects on financial statements of the (1) 2018 restructuring charge of $3.6 billion, and (2) 2018 cash payment of $2.0 billion. Use negative signs with answers, when appropriate. Enter answers in billions. Balance Sheet (in $ billions) Income Statement Noncash Contributed Earned Transaction Cash Asset + Assets Liabilities Capital Capital Revenue Expenses = Net Income (1) (2) + + (c) Assume that instead of accurately estimating the anticipated restructuring charge in 2018, the company overestimated them by $30 million. (1) How would this overestimation affect financial statements in 2018? OOverstates the expense and understates pretax income by $30 million. The restructuring liability on the 2018 balance sheet will be overstated by $30 million. OUnderstates the expense and overstates pretax income by $30 million. The restructuring liability on the 2018 balance sheet will be overstated by $30 million. OOverstates the expense and understates pretax income by $30 million. The restructuring liability on the 2018 balance sheet will be understated by $30 million. OUnderstates the expense and understates pretax income by $30 million. The restructuring liability on the 2018 balance sheet will be overstated by $30 million. (2) How would this overestimation affect financial statements in 2019 when severance costs are paid in cash? OThe cash paid out in 2019 will be more than the 2018 accrual. Any excess (the $30 million) would increase expense (decrease profit) in 2019. OThe overestimation from 2018 will have no effect on the 2019 balance sheet or income statement. OThe cash paid out in 2019 will be less than the 2015 accrual. Any excess (the $30 million) would increase expense (decrease profit) in 2019. OThe cash paid out in 2019 will be less than the 2018 accrual. Any excess (the $30 million) would reduce expense (increase profit) in 2019.
Trade policies a. alter the trade balance because they alter imports of the country that implemented them. b. do not alter the trade balance because they cannot alter the real exchange rate of the currency of the country that implements them. c. alter the trade balance because they alter net capital outflow of the country that implemented them. d. do not alter the trade balance because they cannot alter the national saving or domestic investment of the country that implements them.
According to the video, what tasks do Helpers-Production Workers commonly perform? Check all that apply. fetching and holding materials o supervising other workers o moving materials between work areas o managing budgets training assembly workers keeping records o cleaning machinery
Answer:
a,c,f,g
Explanation: its right!!!!
The tasks that Helpers-Production Workers commonly perform include:
Fetching and holding materialsMoving materials between work areasCleaning MachineryThe correct options are A, C, and E.
What is a production worker?Work that requires manual labor is done by production workers in settings that involve manufacturing or production. Their everyday tasks in an assembly line could include packaging, inspecting, and assembling products. In addition, they might control tools or machinery used in manufacturing.
They may also assist in training assembly workers and keeping records, but supervising other workers and managing budgets are typically not part of their job duties. Production worker assistants perform duties on the factory floor by providing supplies, holding tools, and cleaning workspaces and machinery. Production worker assistants may run and load machinery as well as do small adjustments and repairs.
Thus, the ideal selections are options A, C, and E.
Learn more about production workers here:
https://brainly.com/question/15129221
#SPJ2
Tri-State Mill uses a special sander to finish lumber. Data on the sander and its usage follow. Cost Driver Rate Cost Driver Volume Resources used Energy $ 0.90 per machine-hour 6,000 machine-hours Repairs $ 16.00 per job 600 jobs Resources supplied Energy $ 6,900 Repairs 12,000 Required: Compute unused resource capacity in energy and repairs for Tri-State Mill.
Answer and Explanation:
The computation of the unused resource capacity in energy and repairs for Tri-State Mill. is shown below;
For energy
= $6,900 - 6,000 × $0.90
= $6,900 - $5,400
= $1,500
For repairs
= $12,000 - 600 × $16
= $12,000 - $9,600
= $2,400
Hence, the unused resource capacity in energy and repairs for Tri-State Mill. is $1,500 and $2,400 respectively
On August 8, 2020, Sam, single, age 62, sold for $210,000 his principal residence, which he has lived in for 10 years, and which had an adjusted basis of $60,000. On November 1, 2020, he purchased a new residence for $80,000. For 2020, Sam should recognize a gain on the sale of his residence of: a.$130,000 b.$25,000 c.$50,000 d.$0 e.None of these choices are correct.
Answer: d. $0
Explanation:
IRS rules state that if a person sells their principal residence in which they have lived for at least 2 of the last 5 years, they are not to be taxed on up to $250,000 of profit.
Sam had lived in the sold house for 10 years and this was his principal residence so it qualifies for the above provision.
Gain = Selling price - Basis
= 210,000 - 60,000
= $150,000.
This gain is less than the $250,000 allowed so Sam would recognize a gain of $0.
Which of the following defines core competency?
Answer:b
Explanation:
none
Management at the Flagstaff Company currently sells its products for $250 per unit and is contemplating a 40% increase in the selling price for the next year. Variable costs are currently 30% of sales revenue and are not expected to change in dollar amount on a per unit basis next year (the company will still pay the same variable cost per unit). Fixed expenses are $120,000 per year. If fixed costs were to decrease 10% during the current year and the new selling price goes into effect, how many units will need to be sold to breakeven
Answer:
393 units will need to be sold to breakeven
Explanation:
Break even point is the point where a Company makes neither makes a profit nor a loss.
Step 1 : Calculate new variables
New Sales = $250 x 1.40 = $350
Variable Costs = $250 x 30 % = $75
New Fixed Costs = $120,000 x 90 % = $108,000
Step 2 : Break even (units)
Break even (units) = Fixed Costs ÷ Contribution per unit
= $108,000 ÷ ($350 - $75)
= 393 units
Thus, 393 units will need to be sold to breakeven
A mining company is evaluating when to open a gold mine. The mine has 100,000 ounces of gold left that can be mined and mining operations will produce 10,000 ounces per year. The price of gold from the mine will be guaranteed for the remaining life of the mine through the gold futures contracts. If the mine is opened today, each ounce of gold will generate an after-tax cash flow (= total or net cash flow) of $1,300 per ounce. If the company waits one year, there is a 70 percent probability that the contract price will generate an after-tax cash flow of $1,550 per ounce and a 30 percent probability that the after-tax cash flow will be $1,200 per ounce. The required return on the gold mine is 15 percent and it will cost $30,000,000 to open the mine regardless of whether the mine is open today or in one year. Compute the value of the option to wait today.
Answer:
The value of the option to wait today = $2,500,000
Explanation:
a) Data and Calculations:
Quantity of gold left in the mine = 100,000 ounces
Quantity of gold to be produced yearly = 10,000 ounces
Estimated life of mine = 10 years (100,000/10,000)
After-tax cash flow if mine is opened today = $1,300 per ounce
After-tax cash flow if mine is opened a year later:
Expected value = ($1,550 * 70%) + ($1,200 * 30%) = $1,325 per ounce
Comparison of the values of opening options:
Mine opened Mine opened
today a year later
After-tax cash flow per ounce $1,300 $1,325
Quantity of gold in the mine 100,000 100,000
Total after-tax cash flows $130,000,000 $132,500,000
Cost of opening mine 30,000,000 30,000,000
Required return (15%) 4,500,000 4,500,000
Actual returns from mine $100,000,000 $102,500,000
Therefore, the value of option to wait:
Returns from mine opened next year = $102,500,000
Returns from mine opened today = 100,000,000
Value of the option to wait today = $2,500,000
Tar Heel Auto Parts owns a manufacturing facility that is currently sitting idle. The facility is located on a piece of land that cost $134,000 at the time Tar Heel Auto Parts bought it (several years ago). The facility itself cost $700,000 to build. The current book values of the land and the facility are $134,000 and $214,000, respectively. Tar Heel Auto Parts received a bid of $640,000 for the land and facility last week. They rejected this bid even though they were told that it is a reasonable offer in today's market. If Tar Heel Auto Parts were to consider using this land and facility in a new project, what cost, if any, should they include in the project analysis?
Answer:
Tar Heel Auto Parts
The cost that Tar Heel Auto Parts should include in their new project analysis for the land and facility should be:
= $640,000.
Explanation:
a) Data and Analysis:
Cost Book Value
Cost of a piece of land $134,000 $134,000
Cost of idle manufacturing facility $700,000 $214,000
Current market value of the land and facility = $640,000
b) The current market value of Tar Heel's land and facility is the relevant cost for project analysis. The book value and the cost prices are no longer relevant as they relate to the past and are sunk and historical costs. Sunk and historical costs do not make any difference in decision making. The fair or current market value is a future value that is useful for Tar Heel's project analysis and decision making.
Suppose the following information was taken from the 2022 financial statements of FedEx Corporation, a major global transportation/delivery company. (in millions) 2022 2021 Accounts receivable (gross) $ 3,740 $ 4,610 Accounts receivable (net) 3,400 4,350 Allowance for doubtful accounts 340 260 Sales revenue 33,325 35,825 Total current assets 7,170 7,292 Answer each of the following questions. (a) Calculate the accounts receivable turnover and the average collection period for 2022 for FedEx. (Round answers to 1 decimal place, e.g. 12.5. Use 365 days for calculation.) Accounts receivable turnover enter the accounts receivable turnover in times rounded to 1 decimal place times The average collection period for 2022
Answer:
Accounts Receivable Turnover 8.6 times
Average collections period 42.44 days
Explanation:
A. Calculation to determine the average collection period for 2022 using this formula
Accounts Receivable Turnover = Sales/Average accounts receivables
Let plug in the formula
Accounts Receivable Turnover = 33,325 /[(3,400+4350)/2]
Accounts Receivable Turnover =33,325/(7,750/2)
Accounts Receivable Turnover =33,325/3875
Accounts Receivable Turnover = 8.6 times
Therefore the Accounts Receivable Turnover will be 8.6 times
B. Calculation to determine the Average collections period using this formula
Average collections period = 365/Accounts Receivable Turnover
Let plug in the formula
Average collections period= 365/8.6
Average collections period= 42.44 days
Therefore The Average collections period will be 42.44 days
When happens when demand exceeds supply?
A shortage occurs when demand exceeds supply – in other words, when the price is too low. However, shortages tend to drive up the price, because consumers compete to purchase the product. As a result, businesses may hold back supply to stimulate demand.
Suppose the economy of the large country of Hendrix is currently experiencing economic growth and has a trade deficit. Consider the possible effects of this economic growth on the trade balance and place them in the appropriate category. 1. Likely to occur during economic growth and increase the trade deficit 2. Likely to occur during economic growth and decrease the trade deficit 3. Not likely to occur during economic growth imports increase a. imports decrease b. government borrowing increases c. private savings decrease d. private savings increase e. government borrowing decreases
Answer:
1. Likely to occur during economic growth and increase the trade deficit - imports increase
Economic growth increases the living standard of people because it raises the average income. People often use this income to buy goods from abroad in case demand is not met by domestic firms.
2. Likely to occur during economic growth and decrease the trade deficit - d. private savings increase
Private savings increase during economic growth because people enjoy a higher disposable income. A share of this private savings are invested abroad, where foreigners use this capital to import goods from the original country, decreasing the trade deficit.
3. Not likely to occur during economic growth - c. private savings decrease
Private savings usually increase during times of economic growth for the reasons explained above.
Suppose the total damage function is given as D = M2 for M ≥ 0. Suppose the total abatement cost function is given as TAC = 96M − 0.2M2, where M is emissions
Answer:
so like what is your question
Olaf lives in the state of Minnesota. In 2019, a tornado hit the area and damaged his home and automobile Applicable information is as follows:
Item Adjusted Basis FMV before FMV after Insurance Proceeds
Home $350,000 60,000 $500,000 40,000
Auto $100,000 10,000 $280,000 20,000
Because of the extensive damage caused by the tornado, the President designated the area a Federal disaster area. Olaf and his wife, Anna, always file a joint return. Their 2019 tax return shows AGI of $180,000 and taxable income of $145,000. In 2020, their return shows AGI of $300,000 and taxable income (exclusive of the casualty loss deduction) of $225,000. Assume the taxpayers are in the 22% tax bracket in 2019 and the 24% tax bracket in 2020.
Required:
Determine the amount of Olaf and Anna's loss and the year in which they should take the loss.
Corona Industries purchased a stamping machine on January 2, 20X1, for $100,000. It made an initial payment of $20,000 and financed the balance over 5 years at State Bank. The loan terms were for annual payments of $16,000 plus 10% interest, payable on December 31 each year. The year 20X4 proves to be a difficult year and on December 1, 20X4 Corona negotiates a debt restructuring with State Bank. The settlement calls for cash payment of accrued interest plus $4,000 on December 1 and the transfer of 200 acres of land held by Corona that cost $15,000. The land has a current fair value of $22,000. Which one of the following entries will Corona make to adjust for the land just prior to transfer?
a. DR Loss on disposal of asset $7,000 CR Land $7,000
b. DR Land $7,000 CR Gain on disposal of asset $7,000
c. DR Note payable—State Bank $7,000 CR Gain on disposal of asset $7,000
d. DR Land $7,000 CR Note payable—State Bank $7,000
Answer:
(a) DR Loss on disposal of asset $7,000 CR Land $7,000
The correct option is A). DR Loss on disposal of asset $7,000 and CR Land $7,000
What is journal entry? What are the debit and credit?A journal entry is the process of recording a business transaction in the accounting records of a business.
Debits are always on the left side of the entry, which shows an increase in assets or decrease in liabilities.
Credits are always on the right side, which depicts that there is a decrease in assets or an increase in liabilities.
Learn more about the journal entry here:-
https://brainly.com/question/20421012
#SPJ2
Grib Corporation uses a predetermined overhead rate based on direct labor cost to apply manufacturing overhead to jobs. The predetermined overhead rates for the year are 200% of direct labor cost for Department A and 50% of direct labor cost for Department B. Job 436, started and completed during the year, was charged with the following costs: Department A Department B Direct materials $50,000 $10,000 Direct labor ? $60,000Manufacturing overhead $80,000 ?The total manufacturing cost assigned to Job 436 was:_________A) $360,000B) $390,000C) $270,000D) $480,000
Answer:
$270,000
Explanation:
Calculation of total manufacturing cost assigned to Job 436
Direct Materials
Dept A $50,000
Dept B $10,000
Direct Labor
Dept A ($80,000 x 1/2) $40,000
Dept B $60,000
Manufacturing Overheads
Dept A $80,000
Dept B ($60,000 x 50%) $30,000
Total $270,000
Therefore,
The total manufacturing cost assigned to Job 436 was $270,000.
Shining Cookie Company, Inc., in Murfreesboro, TN bought a new ice cream maker at the beginning of the year at a cost of $12,000. The estimated useful life was four years, and the residual value was $960. Assume that the estimated productive life of the machine was 9,200 hours. Actual annual usage was 3,680 hours in year 1; 2,760 hours in year 2; 1,840 hours in year 3; and 920 hours in year 4.
Required:
1. Complete a separate depreciation schedule for each of the alternative methods. (Do not round intermediate calculations.)
a. Straight-line.
b. Units-of-production (use four decimal places for the per unit output factor).
c. Double-declining-balance.
Answer:
a. Straight Line :
Year 1 : $2760
Year 2 : $2760
Year 3 : $2760
Year 4 : $2760
b. Units of production :
Year 1 : $4416
Year 2 : $3312
Year 3 : $2208
Year 4 : $1104
a. Double Declining Balance :
Year 1 : $6000
Year 2 : $3000
Year 3 : $1500
Year 4 : $560
Explanation:
a. Straight Line Depreciation:
( Cost of Ice cream maker - Residual Value ) / Useful life in years
( $12,000 - $960 ) / 4 = $2760
b. Units of production :
( Cost of Ice cream maker / Total Productive machine hours ) * Annual Usage
Year 1 ($12,000 / 9200 ) * 3680 = 4416
Year 2 ($12,000 / 9200 ) * 2760 = 3312
Year 3 ($12,000 / 9200 ) * 1840 = 2208
Year 4 ($12,000 / 9200 ) * 920 = 1104
c. Double declining method :
Year 1: $12,000 * 50% = $6000
Year 2 : $12,000 * 25% = $3000
Year 3 : $12,000 * 12.5% = $1500
Year 4 : $12,000 * 6.25% = $560
Assume that a parent company owns a 100% controlling interest in its long-held subsidiary. On December 31, 2013, a parent company sold equipment to the subsidiary for $118,000. The equipment originally cost the parent $180,000, and accumulated depreciation through December 31, 2013 was $36,000. The parent depreciated the equipment for 10 years using the straight-line method and no salvage value. After the transfer, the subsidiary will depreciate the equipment for 8 years with no salvage value. Related to the transferred equipment, which of the following items is true regarding the preparation of the consolidated financial statements for the year ending December 31, 2013?A. The consolidation entries will include a $26,000 debit to "Equipment (gross)"B. The consolidation entries will include a $26,000 credit to "Loss on Sale of Equipment"C. The consolidation entries will include a $26,000 debit to "Gain on Sale of Equipment"D. The consolidation entries will include a $26,000 credit to "Accumulated depreciation"
Answer:
Related to the transferred equipment, the items that is true regarding the preparation of the consolidated financial statements for the year ending December 31, 2013 is:
C. The consolidation entries will include a $26,000 debit to "Gain on Sale of Equipment."
Explanation:
a) Data and Calculations:
Original cost of the equipment to the parent = $180,000
Transfer of equipment to subsidiary = (118,000)
Accumulated depreciation to December 31, (36,000)
Unaccounted balance = 26,000
b) The unaccounted balance of $26,000 needs to be credited to the parent's Equipment account to remove it from the account. This will have a corresponding debit entry in another account. The only correct entry among the options is C.
Identify two employment laws which might affect
easyJet plc's business activities.
Answer:
EasyJet Plc is the eighth largest airline in the world and the second biggest in Europe, . The business generated revenue per passenger of £58 compared with a cost per seat . The return on capital employed was just under 12% in 2017. regarding Brexit which might impact on both revenue and costs going forward.
Explanation:I dont have one
Misra Inc. forecasts a free cash flow of $ 35 million in Year 3, ie, at t = 3, and it expects FCF to grow at a constant rate of 5.5% thereafter. If the weighted average cost of capital (WACC) is 10.0% and the cost of equity is 15.0%, what is the horizon, or terminal, value in millions at t = 3?
Answer:
the answer for this question is 1289.44
Marriott International is a worldwide operator, franchisor, and licensor of hotels, residential, and timeshare properties totaling nearly $1.8 billion in net property and equipment. Assume that Marriott replaced furniture that had been used in the business for five years. The records of the company reflected the following regarding the sale of the existing furniture:Furniture (cost) Accumulated depreciation $8,000,000 7,700,000 Required: Prepare the journal entry for the disposal of the furniture, assuming that it was sold for: (If no entry is required for a transaction/event, select "No journal entry required" in the first account field. Enter your answers in dollars not in millions.) a. $300,000 cash b. $900,000 cash c. $100,000 cash
Answer:
Net Book Value of furniture:
= Cost price - Accumulated depreciation
= 8,000,000 - 7,700,000
= $300,000
a. $300,000 cash
Account Title Debit Credit
Cash $300,000
Accumulated Depreciation $7,700,000
Furniture $8,000,000
b. $900,000 cash
Account Title Debit Credit
Cash $900,000
Accumulated Depreciation $7,700,000
Furniture $8,000,000
Gain on disposal $600,000
c. $100,000 cash
Account Title Debit Credit
Cash $100,000
Accumulated Depreciation $7,700,000
Loss on Disposal $200,000
Furniture $8,000,000
Steeler Towel Company estimates its overhead to be $203,000. It expects to have 58,000 direct labor hours costing $1,015,000 in labor and utilizing 14,500 machine hours. Calculate the predetermined overhead rate using: Round your answers to two decimal places. A. Direct labor hours $fill in the blank 1 per direct labor hour B. Direct labor dollars $fill in the blank 2 per direct labor dollar C. Machine hours $fill in the blank 3 per machine hour
Answer and Explanation:
The computation of the predetermined overhead rate in the following cases are shown below:
As we know that
Predetermined overhead rate = Estimated overhead ÷ activity level
1.
= $203,000 ÷ 58,000
= $3.50 per direct labor hour
2.
= $203,000 ÷ $1,015,000
= $0.20 per direct labor dollar
3.
= $203,000 ÷ 14,500
= $14.00 per machine hour
Drag each label to the correct location on the image.
Identify the features of stocks and bonds.
There are various types of investments. The most common type of investments are Bonds and Stocks.
What is difference between Bond and Stock?A bond is an investment which is considered as less risky because it provides fixed coupon rate as return.
A Stock is considered as risky investment because its returns vary.
The features of Bond are : It has Coupon rate, Face value and Maturity date
The features of Stock are : It has Closing Price
Learn more about bonds at https://brainly.com/question/13961163
#SPJ2
Answer:
stock- closing price; bond- coupon rate, face value, maturity date
Explanation:
You are running a hypothetical e-business in this course. Suppose your company only have one employee and three customers who do not access your website frequently. Your company also does not need to process a lot of information; in this case, to save your money, which types of computers does your company need to fulfill such a computing need?
Answer:
do the challnge in brainly it gives u points !!!!
Explanation:
According to the given hypothetical e-business situation, simple personal computers can be used to fulfill the required computing needs.
What is e-business?"E-business is an electronic business or transaction in which user shares the information online. In this, information, products, and services can be shared between business, groups, and individuals and considered as an essential activities."
What is personal computer?"Personal computer is a computer which is a multi-purpose system and its size, capabilities and prize makes it feasible for individual use."
In the given situation, the analyses of data is less which can be fulfilled by the personal computers only and there is no need to purchase systems with special features. The employee can fulfill the requirements of current e-business with the help of any personal computer like desktop, laptop, etc.
To learn more about e-business and personal computer here
https://brainly.com/question/13165862
#SPJ3
clarify the term fair discrimination
The term fair discrimination is a type of discrimination that is legally required.
What is fair discrimination?Firm discrimination may be based on the following situations:
Inherent requirements of a particular job (qualifications)Compulsory discrimination by law (for example, laws that regulated interracial marriages)Discrimination based on productivity (meritocracy).Thus, fair discrimination is a type of discrimination that is legally required.
Learn more about fair discrimination practices at https://brainly.com/question/22114189
Uptown Bank provides lockbox services. They estimate that you can reduce your average mail time by 2.2 days and your combined clearing and processing time by .75 days by implementing their system. Your firm receives 65 checks a day with an average value of $298 each. The current T-Bill rate is .01 percent per day. Assume a 365-day year. The bank will charge your firm $.15 per check. What is the annual net savings from installing this system?
Answer: $1473.067
Explanation:
First, we calculate the total time that's saved by the firm when it installs the lockbox services. This will be:
= 2.2 days + 0.75 days
= 2.95 days
Then, the gross amount that the firm will save will be:
= 65 × 2.95 × 298 × 0.01%
= $5.7142 per day
Since the bank charges the firm $0.15 per check and the firm receives 65 checks per day, the total cost to the firm will then be:
= 65 × $0.15
= $9.75 per day
The net loss will then be calculated as:
= $9.75 - $5.7142
= $4.0358 per day
Then, to get that for annual, we multiply the above value by 365. This will be:
= $4.0358 × 365
= $1473.067 per annum.
How to control quality?
Answer:
Explanation:
1. Set your quality standards.
In some industries, you may have to meet quality standards set by an outside body, such as an industry association, the local health and safety inspector, or a government regulatory agency. In others, there aren't any official quality standards, so you'll need to set your own.
Each department of your business will have different quality control standards. However, they must all be objectively measurable. For example, if you're developing quality control standards for your customer service team, “sounding friendly on the phone" is not a measurable standard. Measurable standards might include:
Answering all customer calls by the second ring
Responding to all customer service emails within four hours
Resolving customer service problems in five minutes or less
2. Decide which quality standards to focus on.
Of course, you want to ensure quality in all aspects of your operation. However, begin by focusing on the most important measures — those that have the biggest effect on your profits and your customer experience. This will enable you to get results quickly and also keeps you and your team from becoming overwhelmed.
For instance, if you own a restaurant, keeping the restrooms clean is definitely something to monitor in your quality control program—but not the most important thing. Getting orders out to customers quickly and accurately is a more important standard because it has a more direct effect on the quality of experience and customer satisfaction.
3. Create operational processes to deliver quality.
W. Edwards Deming, the founder of modern quality control, believed that well-designed processes lead to high-quality products and services. If you create good processes, continually measure the results of the processes, and work to consistently improve the process, your product or service will get better and better.
Starting with your critical operations, create step-by-step processes that include benchmarks. For instance, in a B2B company's accounting department, operational processes might require preparing and delivering invoices within 24 hours after a job is completed or a product is delivered. In a restaurant, operational processes might require servers to pick up food for delivery to the customer’s table within two minutes of it being prepared.
4. Review your results.
Most business software, from financial and accounting apps to customer relationship management or customer service tools, lets you customize the information you collect and use dashboards to view it at a glance. Review your data regularly to see how well your company is meeting its quality standards.
5. Get feedback.
Use measurable feedback from external sources, such as customer surveys, online ratings and reviews and net promoter scores (NPS), to get a fuller picture of product and service quality. Also, get regular feedback from employees. How well are the operational processes working to deliver quality? How could they be improved?
6. Make improvements.
Once you’re meeting your quality control standards, don't stop there. For example, if you own a residential cleaning service business and you can cut the time it takes your maids to clean a home by 25 percent, you’ll be able to handle 25 percent more business without hiring any additional employees. That will really boost your bottom line.
No matter how well your processes are running, quality control shows there's always room for improvement, and making small changes can pay off in big ways.
As a project engineer, you received the AW analysis below from the finance department. It is for a new piece of equipment you ordered some months ago. You were told the interest rate used was 10% per year, but no first cost or projected salvage value was provided and you want to know them. Determine the values of P and S using the AW values for the year 3. Note: The AW values are equivalent values through the given year, not costs for the single year.
Answer and Explanation:
The computation of the value of P and the value of S is shown below:
For P
The Annual worth of the first cost for the year 3 is $18,899
Now
Annual worth = First Cost(A/P, 10%, 3)
$18,899 = P[0.1(1 + 0.1)^3 ÷ ((1 + 0.1)^3 - 1)]
$18,899 = 0.4021P
P = $46,999
For S
The Annual worth of the salvage value for the year 3 is $6,648
Now
Annual worth = Salvage value(A/F, 10%, 3)
$6,648 = S[0.1 ÷ ((1 + 0.1)^3 – 1)]
$6,648 = 0.30211S
S = $22,005