This is an illustration of asymmetric ketone deprotonation. Here, there are two potential outcomes.
What is Thermodynamic Product?
Thermodynamic product is a term used in thermodynamics to refer to the end product of a thermodynamic process. It is the state of the system at the end of the process, which has been changed from its initial state by the application of energy. The thermodynamic product is usually a combination of heat and work, which is released by the system in the form of energy. The thermodynamic product is also known as the final state of the system, which is determined by the total of the energy and mass that enter or leave the system during the process. It is also important to understand that thermodynamic products are not necessarily the desired end result of a process, and that the thermodynamic process can produce a variety of different outcomes depending on the nature of the process.
To learn more about Thermodynamic Product
https://brainly.com/question/9578903
#SPJ4
for a two-phase mixture at equilibrium at a given temperature and pressure, if both species are present in the two phases, the activity of each species must be spatially uniform throughout the two phases, true or false?
For a pure substance, two phases that are in thermodynamic equilibrium must share the same chemical potential. The Clausius-Clapeyron equation, which can be used to define the phase boundary between the phases, can be used for this.
At low temperatures and high pressure, the solid phase is preferred; at high temperatures and low pressure, the gas phase is preferred. The temperature and pressure ranges at which two phases can coexist in equilibrium are represented by the lines in a phase diagram.
Learn more about the temperatures,
https://brainly.com/question/24307880
#SPJ4
without doing any calculations, determine the sign of δssys for each of the following chemical reactions. drag the appropriate items to their respective bins.
Entropy is stated to diminish as a system switches from an ordered to a disordered layout, and vice versa. When randomness rises, ΔS is positive.
What does ΔS stand for?Heat transport (delta Q) divided by temperature equals the change of entropy (delta ΔS ) (T). (Delta Q / T) = delta ΔS If a physical process can be reversed, the entropy of the environment and the system will stay constant.
What are ΔS measured in units?The Connection Between 'ΔH' and 'ΔS 'One thing to bear in mind when using any one of these equations in computations is that while ΔS values are typically reported as J/K.mol, G and ΔH values are frequently reported in kJ/mol.
Briefing1. 2H30' (aq) + CO23- (aq) - CO2(g) +3H2O(1)
2. CH4(g) + 202,(g) - CO2(g) + 2H2O(l)
3. Mg (s) + Cl2(g) - MgCǐ2(s)
4. SO3(g) + H2O(I) - H2SO4(I)
To know more about ΔS visit:
https://brainly.com/question/4121612
#SPJ4
the reactants of a chemical equation are 3h2 and n2, which set of atoms must make up the equations product so that the equation models the law of conservation of mass
There are 6 hydrogens and 2 nitrogen when 3h2 reacts with N2 such that the equation follows the law of conservation of mass.
It is already balanced when N2(g) + 3H2(g) 2NH3(g). There are two nitrogens on the left and two on the right, as you can see. On the left, there are 6 hydrogens, and on the right, there are 6.
The law of conservation of mass, also known as the principle of mass conservation, in physics and chemistry states that for any system closed to all transfers of matter and energy, the mass of the system must remain constant over time because the mass of the system cannot change and therefore quantity cannot be added to or subtracted.
According to the rule of conservation of mass, mass is neither generated nor destroyed during a chemical process. For instance, when coal is burned, the carbon atom in it transforms into carbon dioxide.
For more information on law of conservation of mass kindly visit to
https://brainly.com/question/28711001
#SPJ4
Calcite (caco3) is a crystal with abnormally large birefringence. The index of refraction for light with electric field parallel to the optical axis (called extraordinary waves or e-waves) is 1. 4864. The index of refraction for light with electric field perpendicular to the optical axis (called ordinary waves or o-waves) is 1. 6584.
Calcite (caco3) is a crystal with exceptionally significant birefringence when a light wave travels through one medium to another. The right responses to the question are 42.28 and 37.08 degrees.
What do crystals and examples mean?
A few examples of everyday objects that are crystals include table salt, also known as sodium chloride and halite crystals, sugar, sometimes known as sucrose, and snowflakes. Several gemstones, such as diamond and quartz, are composed of crystals. There are numerous compounds that resemble crystals but are actually polycrystals.
Is crystal a gem?
"A crystal can't be a gemstone, but a diamond can be a crystal." In contrast to sugar, which is a gemstone but not a crystal,
To know more about crystal visit:
https://brainly.com/question/13008800
#SPJ4
how many l of oxygen (total) (at 350 degrees c and at 5.25 atm) are needed to convert 5.00 g of s to so3? s (solid) o2 (gas) --> so2 (gas) then 2so2 (gas) o2 (gas) --> 2so3 (gas)
2.19 liters of oxygen at 350 °C and at 5.25 atm are needed to convert 5.00 g of S to SO₃.
Using the equation- S + 3/2 O₂ → SO₃
Moles of sulfur- 5/32 = 0.15 mol
Given the stoichiometry, we require- 3/2 * 0.5
Mol of dioxygen gas = 0.225 mol.
And now we solve for volume in the Ideal Gas equation as V = nRT /PV
The equation of state for a fictitious ideal gas is known as the ideal gas law, sometimes known as the generic gas equation. Although it has some restrictions, it is a good approximation of the behavior of numerous gases under various circumstances. Benoît Paul Émile Clapeyron introduced it for the first time in 1834 as a synthesis of the empirical Boyle's law, Charles' law, Avogadro's law, and Gay-Lussac's law. The empirical form of the ideal gas law is frequently used:
PV=nRT
∴V = nRT /PV
⇒0.225 mol x 0.0821L atm K⁻¹ x 623 K / 5.25
⇒V= 2.19 L
Hence, 2.19 Liters of oxygen at 350 °C and at 5.25 atm are needed to convert 5.00 g of S to SO₃.
To learn more about Ideal gas equation refer- https://brainly.com/question/24236411
#SPJ4
what are the typical advantages of using hot forming/working (compared to cold forming/working)? [select all that apply]
In comparison to hot working, cold working uses less heating, yields a better surface polish, has greater dimensional qualities, and has fewer contamination issues.
Heat is the energy transfer that happens as a result of the temperature differential between a system and its surroundings. Heat is the energy transmission that uses or stimulates disordered molecular motion in the environment at the molecular level. Heating is the result of the movement of kinetic energy from one media or item to another, or from an energy source to a medium or object. Radiation, conduction, and convection are the three possible mechanisms for this type of energy transmission. When the temperature rises, atoms and molecules move more quickly and collide, creating thermal energy (also known as heat energy). Thermal energy is the power that results from the heated object's temperature.
Learn more about heating here:
https://brainly.com/question/14770290
#SPJ4
write the complete and balanced chemical equation to explain why aluminum metal reaxcts vigorously with aqueous potassium hydroxide
Due to the creation of complicated potassium aluminate, this reaction is complex.
Describe potassium alum.The FDA classifies potassium alum as a chemical that is generally acknowledged as safe (GRAS). It is an inorganic salt with the formula AlK(SO4)2, sometimes known as potassium aluminum sulfate.
How does potassium aluminate come into being?Nowadays, potassium sulfate is added to a concentrated solution of aluminium sulfate to create potassium alum in an industrial setting. Typically, sulfuric acid is used to process minerals like cryolite, bauxite, and alum schist to produce aluminum sulfate.
Breif:
2 Al ( s ) Aluminium + 2 KOH ( aq ) Potassium hydroxide + 6 H 2 O ( l ) Water → 2 K [ Al ( OH ) 4 ] ( aq ) Tetrahydroxoaluminate ( III ) or Potassium aluminate + 3 H 2 ( g ) Hydrogen.
To know more about potassium aluminate visit:
https://brainly.com/question/11497057
#SPJ4
on spacecraft, a h2/o2 fuel cell is used to produce electricity. regarding the fuel cell reactions: a. what is the balanced redox reaction? b. what is ecell assuming po2
A fuel cell is a galvanic cell. In a hydrogen-oxygen fuel cell, hydrogen and oxygen are bubbled through porous carbon electrodes into a concentrated aqueous sodium hydroxide solution. Platinum or palladium metal that has been finely divided serves as the catalyst in this instance. at the anode. H2(g)+2OH−(aq)→2H2O(l)+2e−
The H2O2 fuel cell's basic structure consists of porous carbon electrodes with appropriate catalysts (typically finely divided platinum and palladium) integrated into them. As an electrolyte, concentrated KOH or NaOH is positioned between the electrodes.
Learn more about the fuel cells
https://brainly.com/question/17100278
#SPJ4,
Why did the maya need to create innovative to manage water?
Answer:
to figure out how to sustain large populations in this environment.
brainliest plssAnswer:
The maya needed to create innovative ways to manage water because they lived in a dry climate.
They needed to find ways to collect water and store it for later use.
Explanation:
There were downpours during the unpredictable wet season and there was a long dry season
Not many rivers
According to the electronegativity difference between the atoms in water, it would be appropriate to label hydrogen with the symbol 18+ and oxygen with the symbol 8+ st
The electronegativity of hydrogen is 2.0, while that of oxygen is 3.5.
Electronegativity is a chemical property that describes an atom's or functional group's tendency to attract electrons toward itself. An atom's electronegativity is affected by both its atomic number and the distance between its valence electrons and the charged nuclei.
It governs the distribution of shared electrons between two atoms in a bond. The greater an atom's electronegativity, the more strongly it attracts electrons in its bonds. The electronegativity of hydrogen is 2.0, while that of oxygen is 3.5. Because the difference in electronegativities is 1.5, water is a polar covalent molecule. This means that electrons are strongly attracted to the more electronegative element, but the atoms are not ionized.
To learn more about electronegativity, here
https://brainly.com/question/17762711
#SPJ4
You add 100. 0 g of water at 60. 0°c to 100. 0 g of ice at 0. 00°c. Some of the ice melts and cools the water to 0. 00°c. When the ice and water mixture has come to a uniform temperature of 0°c, how much ice has melted?.
To calculate the amount of heat needed to melt ice;
Q = w x Cp x ∆T {where Cp is specific heat of material}
=100.0g (4.186J/g°c) (-60°C)
=-25116J
Heat lost by water is gained by ice,
q = m*ΔH
-25116J = m*333J/g
q = -75.4
Therefore, Mass of ice is 75.4 g.
What is mass?
It is a dimensionless quantity that expresses a particle or object's mass. The accepted unit of mass under the International System (SI) is the kilogram.
What is temperature?
Temperature is a measure of the average kinetic energy of the particles inside an object. The temperature increases cause these particles to move more quickly. It is possible to measure temperature using a thermometer or a calorimeter.
Learn more about mass here ; brainly.com/question/338808
#SPJ4
The activity series ranks metallic ions from most reactive to least reactive.
In addition to metallic ions, we should consider the halogens. The elements in the
halogen family are ranked from most active to least as we move down the column.
That means a halogen at the top of the column will replace the elements below
them on the periodic table but not the other way around.
Based on this information determine which reaction will not occur?
Due to the activity series that is given in the image, the reaction that will not take place is FeCl₂ + Br₂ , thus, option A is correct.
What is the equation about?From the nature of the question above, we must infer the response that won't happen and as such:
2NaI + Cl₂
Because chlorine can replace iodine, this reaction will take place. Chlorine is higher on the activity series, which explains why.
Sn + H₂SO₄
Due to the fact that tin (Sn) can dispense hydrogen from the acid, this reaction will take place.
FeCl₂ + Br₂
So, since Chlorine cannot be replaced by Bromine, this reaction won't take place. This is due to Bromine's lower position on the activity series than Chlorine.
Fe(NO₃)₃ + Al
Aluminum's ability to replace iron will cause this reaction to take place. This is so that Aluminum (Al) ranks higher than Iron in the activity series (Fe).
Therefore, one can say that the reaction is thus: FeCl₂ + Br₂ ,
Learn more about activity series from
https://brainly.com/question/19482695
#SPJ1
what compound forms when one molecule of hcl and one molecule of nh3 combine? it is an ionic compound.
One molecule of nh3 and one molecule of hcl combine to make NH4CL. Ionic compound describes it. In the process of neutralization, a basic solution balances out an acidic solution.
This keeps the pH at 7, which is a neutral value. The hydrogen ion and hydroxide ions are equal in this neutralized solution; nothing is in excess. Here, NH3 and HCl operate as a strong acid and a weak base, respectively, in a neutralization reaction that results in the formation of salt. The resultant salt's pH changes to 7 in this neutralization reaction. Titration aids in the neutralization's occurrence. An ionic compound in chemistry is a chemical complex made up of ions kept together by electrostatic forces is known as ionic compound.
Learn more about ionic compound here
https://brainly.com/question/9167977
#SPJ4
What is ANFO made of
Answer:
(AN) Ammonium nitrate ( 94% )
(FO) Diesel fuel ( 6% )
Explanation:
5.provide an example of each of the following types of reactions: a.neutralization b.acid and metal c.acid and metal oxide
a. Neutralization: strong acid and strong bases and strong acid and weak bases b. Acid and metal: sulphuric acid and nitric acid c. acid and metal oxide: basic oxides and neutral oxides.
Give an example of a neutralizing reaction.Response to Neutralization: Strong acid and strong base reactions produce a salt that is neither acidic nor basic in nature, or neutral. For instance, sodium chloride and water are produced when HCl (hydrochloric acid), a powerful acid, combines with NaOH, a powerful base.
What does neutralizing an acid entail?The interaction of H+ ions and OH- ions produces water in a neutralization reaction, which occurs when an acid and a base react to form water and a salt.
Learn more about Neutralization here:
https://brainly.com/question/27891712
#SPJ4
which greenhouse gas listed here has the longest atmospheric lifetime? carbon dioxide methane nitrous oxide all greenhouse gases have approximately the same atmospheric lifetimes
Nitrous oxide have longest atmospheric lifetime of 121 years.
What is atmospheric lifetime?
The period of time it takes for the atmosphere to return to equilibrium after a dramatic change in a species' atmospheric concentration is called its atmospheric lifetime.
The longest atmospheric life of nitrous oxide is 121 years.
Methane has approximately 12.4 years.
Due to its conversion into carbon dioxide, carbon monoxide has even less energy.
Additionally, because carbon dioxide is not eliminated, its lifetime is not known.
To learn more about atmospheric lifetime from the given link.
https://brainly.com/question/11546371
#SPJ4
a medical laboratory catalog describes the pressure in a cylinder of a gas as 14.82 mpa. what is the pressure of this gas in atmospheres and torr?
Ideal gas law is valid only for ideal gas not for vanderwaal gas. Therefore, the pressure in atm and torr is 148.2 atm and 1,12,632 torr respectively.
What is ideal gas equation?Ideal gas equation is the mathematical expression that relates pressure volume and temperature. There is no force of attraction between the particles.
pressure= 14.82 mpa
= 14.82 × 10⁶ pa
1 atm = 10⁵ pa
1 Pa = 1/10⁵ atm
pressure= 14.82 × 10⁶× 1/10⁵ atm
= 148.2 atm
1 atm = 760 torr
pressure= 148.2 ×760 torr
= 1,12,632 torr
Therefore, the pressure in atm and torr is 148.2 atm and 1,12,632 torr respectively.
To learn more about ideal gas equation, here:
https://brainly.com/question/14826347
#SPJ1
Use equation (14.2) to make a semilog plot of conduction electron concentration versus (1/kT) for intrinsic (pure) silicon. The conduction electron concentration in Si at T=293 K (room temperature) is 1010 cm−3. (b) Below what temperature are there essentially no charge carriers in pure Si (say, less than one carrier per cm3 )? (c) Is there some temperature below the melting point of Si (Tmelting =1690 K ) at which the conduction electron concentration in Si is comparable to that of a metal?
If the surface concentration is 1018 atoms/cm3, the depth below the surface at which the concentration is 1017 atoms/cm3 is 0.32 cm.
The expression is as follows:
erf (x / 2 D t) = (Cs - Cx) / (Cs - Co)
where Cs = surface concentration = 1018 atoms/cm3
Cx = depth concentration = 1017 atoms/cm3
Co - solute concentration in solid
erf stands for error function.
(1018 - 1017) / 1018 = (Cs - Cx) / (Cs - Co)
= 0.00098
erf (x / 2 D t) = 0.00098
0.000868 = x / 2 √ 2 × 10⁻² × 5 (3600) (3600)
x = 0.32 cm
0.32 cm is the depth.
To learn more about depth please click on below link
https://brainly.com/question/13804949
#SPJ4
a firm runs its technology operations on a fleet of amazon ec2 instances. the firm needs a certain software to be available on the instances to support their daily workflows. the developer team has been told to use the user data feature of ec2 instances.
User Data is generally used to perform common automated configuration tasks and even run scripts after the instance starts. When you launch an instance in Amazon EC2, you can pass two types of user data - shell scripts and cloud-init directives. You can also pass this data into the launch wizard as plain text or as a file.
In general, a configuration is the arrangement of the components that make up a whole, or the act of creating that arrangement. A configuration, or particular shape, is produced when objects are placed in any spatial arrangement. As an illustration, scientists refer to a configuration as the particular, bound arrangement of atoms that forms a molecule.
Text, observations, figures, photos, numbers, graphs, and symbols can all be used as forms of data. Individual prices, weights, addresses, ages, names, temperatures, dates, or distances, for instance, could be included in the data. Data is an unprocessed type of knowledge and has no meaning or use by itself.
Learn more about configuration here:
https://brainly.com/question/14871898
#SPJ4
what kind of chemical formula would an ionic compound have if the compound consists of a face centered cubic lattice with
The formula of ionic compound forming face centered cubic lattice will be AB₃
The face centered cubic lattice has atom present at corner as well as all the faces of unit cell. suppose the we have two atom A and B forming FCC.
Atom present in corner contribute = 1/8
Atom present in face contribute = 1/2
A atom present in the corner = 8 x 1/8
A atom = 1 atom
B atom present in the faces of unit cell = 6 x 1/2
B atom = 3 atom
Chemical formula of ionic compound = AB₃
Hence, ionic compound exist in AB₃ formula in FCC.
To know more about Unit cell.
https://brainly.com/question/13110055
#SPJ4
using the chemical equation to help you, how many nadphs are required to fix one molecule of co2 in the calvin-benson cycle?
In the Calvin-Benson cycle, 1 molecule of CO2 requires 3 molecules of NADPH for fixation.
This is because the Calvin-Benson cycle involves the reduction of CO2 to glucose, which requires three molecules of NADPH for the reduction reactions. NADPH is a type of coenzyme that helps in providing electrons for the reduction of CO2 to glucose. So, to fix one molecule of CO2 in the Calvin-Benson cycle, three molecules of NADPH are required.
Chemical equation: 3ATP + 2 NADPH2
What is the Calvin-Benson cycle?Also known as the reductive pentose phosphate cycle or the C3 cycle, is a series of biochemical reactions that plants use to fix carbon dioxide and produce carbohydrates.
The cycle begins with the fixation of carbon dioxide into a glycerate 3-phosphate molecule, which is then reduced to a 3-carbon sugar molecule. The sugar molecule is then converted into other molecules such as fructose 6-phosphate and ribulose 5-phosphate, which are then used to form other molecules such as glucose and starch.
Complete question:
Using the chemical equation to help you, how many nadphs are required to fix one molecule of co2 in the calvin-benson cycle?
Chemical equation: 3ATP + 2 NADPH2
Learn more about the Calvin-Benson cycle:
https://brainly.com/question/13213344
#SPJ4
You add 100. 0 g of water at 60. 0°c to 100. 0 g of ice at 0. 00°c. Some of the ice melts and cools the water to 0. 00°c. When the ice and water mixture has come to a uniform temperature of 0°c, how much ice has melted?.
Mass of ice is 125.7 g
q = mass of water C water (0 - 100 degree C)
q = 100 g (4.186 j/g degree c)(-100)
q = -41860J
Heat l0st by water is gained by ice
-q = m × Δh
-(-41860) = m × 333j / g
mass of ice = 125.7 g
The quantity of matter in a sample is represented by the attribute of mass. Grams (g) and kilograms are typically used to report mass (kg).
Another way to think of mass as the characteristic that gives matter its ability to resist acceleration is as a property. Acceleration is more difficult for objects with more mass.
Weight vs. Mass
Although the terms mass and weight are not interchangeable, an object's weight depends on its mass. W is weight, m is mass, and g is the acceleration of gravity, which on Earth is approximately 9.8 m/s2. Weight is the force that a gravitational field exerts on mass. Therefore, the units of kgm/s2 or Newtons are used to report weight in a suitable manner (N). However, because the Earth is a sphere,
Learn more about Mass here:
https://brainly.com/question/14651380
#SPJ4
how many amperes of electricity are needed to electrolyze cu2 to cu if 1.15 moles of cu is produced in 4.8 seconds?
47542 amperes of electricity are needed to electrolyze Cu²⁺ to Cu if 1.15 moles of Cu is produced in 4.8 seconds.
Using the formula w= zit
where w,
The quantity of power transported through the electrolyte directly correlates to the amount of material created at an electrode during electrolysis. W is the mass of substance produced at an electrode, and It. or W = ZIt.
W = Zit ( Q= I*t ) Where, Z = Electrochemical Equivalent. Z = atomic weight/nF (n = no. of electron, F = 96500 )
z= atomic weight/ nF
z= 63.5/ 2 * 96500
z= 0.00032
∴w = 0.00032 *i * 4.8
w= number of moles* molecular weight
w= 1.15 * 63.5
w= 73.025
73.025= 0.00032 * i * 4.8
i= 73.025/ 0.00032 * 4.8
i= 47542 ampere
Therefore 47542 amperes of electricity are needed to electrolyze Cu² to cu.
To learn more about electrolysis refer- https://brainly.com/question/24063038
#SPJ4
Sulfuric acid is commonly used as an electrolyte in car batteries. Suppose you spill some on your garage floor. Before cleaning it up, you wisely decide to neutralize it with sodium bicarbonate (baking soda) from your kitchen. The reaction of sodium bicarbonate and sulfuric acid is
2NaHCO3(s) + H2SO4(aq)
→
Na2SO4(aq) + 2CO2(g) + 2H2O(l)
You estimate that your acid spill contains about 1.4 mol H2SO4. What mass of NaHCO3 do you need to neutralize the acid?
__×10 __g
2.8 moles of sodium bicarbonate (NaHCO3) are needed to neutralize 1.4 moles of sulfuric acid (H2SO4), considering that the balanced equation of the reaction between NaHCO3 and H2SO4 in the car battery is
2NaHCO3(s) + H2SO4(aq) → Na2SO4(aq) + 2CO2(g) + 2H2O(l)
stoichiometric ratioIt is observed in the stoichiometric ratio of the reaction that for every 2 moles of NaHCO3, 1 of H2SO4 is needed.
Therefore, only a rule of three is required to determine how many moles of NaHCO3 are needed to neutralize 1.4 mol of H2SO4
Rule of three2 mol of NaHCO3 ----------- 1 mol of H2SO4
X mol of NaHCO3 --------- 1.4 mol of H2SO4
X = 1.4 x 2 / 1 = 2.8 moles
Learn more about acid neutralization at https://brainly.com/question/27813508
#SPJ4
in one experiment, 23.91 ml of the 0.1403-m ce4 solution is required to react completely with 20.00 ml of the fe2 solution. calculate the concentration of the fe2 solution.
Concentration of the original fe₂ solution is 0.16772 M.
What is Concentration?
Concentration in chemistry is calculated by dividing a constituent's abundance by the mixture's total volume. Mass concentration, molarity, number concentration, as well as volume concentration are four different categories of mathematical description. Any type of chemical mixture can be referred to by the term "concentration," but solutes but also solvents in solutions are most frequently mentioned. There are different types of molar (amount) concentration, including normal concentration as well as osmotic concentration. Concentration is frequently described qualitatively in everyday, non-technical language by using adjectives like "dilute" for solutions with a low concentration as well as "concentrated" for solutions with a high concentration.
Here, we have given two solution with their conc. and volume.
So, formula used to calculate conc. is
M1V1 = M2V2
let,
M1 = molarity of fe2
V1 = volume of fe2 used
M2 = molarity of ce4
V2 = volume of ce4 used
now, M1 X 20 = 0.1403 x 23.91
M1 = 0.1403 X 23.91 / 20
M1 = O.16772
Hence, the concentration of fe2 is 0.16772 M.
To learn more about Concentration
https://brainly.com/question/26255204
#SPJ4
arrange the following images of an aqueous base solution in order of decreasing base strength: rank images from strongest to weakest base. to rank items as equivalent, overlap them.
There were no image given in the statement hence providing information about strongest base to weakest base.
What is ?Strongest base:Any base which can be completely dissociated in an aqueous solution is termed as Strong base.
Some examples of strong base are:
Lithium Hydroxide.Sodium Hydroxide. Potassium Hydroxide.Rubidium Hydroxide.Cesium Hydroxide.Calcium HydroxideThe Strongest base is known as ortho-diethynylbenzene dianion.
Weak base:Any base which can't be completely dissociated in an aqueous solution is termed as Weak base . Some examples of weak base are:
Ammonia Aluminium hydroxideLead hydroxide Ferric hydroxide Copper hydroxideThe weakest base can be water.
To know more about Strong Base visit
https://brainly.com/question/24003853
#SPJ4
this reaction is sometimes used to inflate life rafts, weather balloons, and the like, where a simple, compact means of generating h2 is desired. how many grams of cah2 are needed to generate 15 l of h2 gas if the pressure of h2 is 780 torr at 26c
According to the chemical reaction is CaH2(s)+2H20(l). Ca (OH)2+2H2(g). Now, according to the ideal gas equation n=PV/RT=0.48. According to stoichiometry=½*0.48= 0.23 moles. So that the mass of CaH2= moles*molar mass= 0.24mol*42g/mol= 10.2g is the final answer.
How is the ideal gas equation defined?PV = nRT is the equation for an ideal gas. In this equation, P stands for the ideal gas's pressure, V for the ideal gas' volume, n for the total amount of the ideal gas expressed in moles, R for the universal gas constant, and T for temperature.
The stoichiometric equation: what is it?The greatest amount of product that can be produced is determined by the stoichiometry of a balanced chemical equation. The relative amounts of reactants and products in a balanced chemical equation are described by a reaction's stoichiometry. You can see from the coefficients that 2 moles of CO2 are created for every 1 mole of C6H12O6. Using this proportion.
To know more about Ideal gas equation here:
brainly.com/question/17254541
#SPJ4
Why is air cooled before nitrogen and oxygen are obtained
Answer:
The main reason why air is cooled before nitrogen and oxygen are obtained is because these two gases are much more soluble in cold air than in warm air. As a result, if air were not cooled before these gases were separated, they would simply mix back together again.
outline the best method for preparing the following ketone from an appropriate alcohol in one step. draw the starting alcohol and select the best reagent.
A ketone is a functional group in organic chemistry with the formula R-C(=O)-R', where R and R' can be any number of carbon-containing substituents. A carbonyl group, or C(=O)-, or carbon-oxygen double bond, is present in ketones.
What is reagent?
Reagents are substances or mixtures that are added to a system in order to start a chemical reaction or determine whether one has already happened. A reagent can be used to test for the presence of a certain chemical by generating a reaction with it.
Reagents can be substances or combinations. Small inorganic or organic molecules make up the majority of compounds in organic chemistry. The Grignard reagent, the Tollens reagent, the Collins reagent, the Fehling reagent, and the Fenton reagent are examples of reagents. To be used as a reagent, a chemical does not necessarily need to contain the word "reagent" in its name.
Learn more about Reagent from given link
https://brainly.com/question/6959208
#SPJ4
The only force acting on an object moving along the x-axis is the conservative force given by f(x) = (2. 00 n/m)x + (1. 00 n/m^3)x^3. What is the change in kinetic energy when the object moves from x = 1. 00 m to x = 2. 00 m?.
The change in kinetic energy when the object moves from x = 1. 00 m to x = 2. 00 m is -6.75J.
Given
Force [tex]$F(x)=2 x+x^3$[/tex]
Change in Potential Energy from x=1 to[tex]$x=2 \mathrm{~m}$[/tex] is given by
[tex]$$\begin{aligned}& \Delta U=\int F(x) d x \\& \Delta U=\int_1^2 F(x) d x \\& \Delta U=\int_1^2\left(2 x+x^3\right) d x \\& \Delta U=\left|x^2+\frac{x^4}{4}\right|_1^2 \\& \Delta U=6.75 J\end{aligned}$$[/tex]
(b)Change in Kinetic Energy
If the Force is conservative in nature then the total change in mechanical energy is zero thus
Thus [tex]$\Delta K . E .=U_1-U_2=-\Delta U=-6.75 . J$[/tex]
To learn more about Kinetic Energy visit:https://brainly.com/question/26472013
#SPJ4