Answer:
To find the pOH, simply subtract the pH from 14. In order to calculate the pOH, take the negative log of the hydroxide ion concentration.
Explanation:
Hope this helps :3
Which of the following naming systems would you use to nameHClO2?
Question 6 options:
a)
HYDRO________IC ACID
b)
HYDROGEN _________IDE
c)
________________IC ACID
d)
________________OUS ACID
Which is an example of a nonaqueous solution?
gasoline
fog
mayonnaise
fruit juice
Answer: Gasoline
Explanation: Siri said so
The non-aqueous means it does not contain water. Among the given options gasoline is an example of a non-aqueous solution. The correct option is A.
What is a non-aqueous solution?The solution which is obtained by dissolving solute in any liquid other than water is defined as the non-aqueous solution. If solute is dissolved in solvent like benzene, alcohol, ether, carbon disulphide, acetone etc. forms a non aqueous solution.
The major difference between the aqueous and non-aqueous solution is that the solvent of an aqueous solution is water whereas in non-aqueous solutions, the solvent is any substance other than water.
The solvent of non-aqueous solution can be polar or nonpolar and depending on the polarity the solutes dissolve in the solvent. Here gasoline is an example of the non-aqueous solution. The gasoline is a crude oil which does not include water as an ingredient.
Thus the correct option is A.
To know more about non-aqueous solution, visit;
https://brainly.com/question/4992250
#SPJ7
if 67.8 moles of gas was measured out into a helium balloon how many molecules would be present within the balloon
Answer:
[tex]4.08x10^{25} molecules[/tex]
Explanation:
Hello there!
In this case, since the understanding of the mole-molecules relationships is analyzed via the Avogadro's number:
[tex]1mol=6.022x10^{23}molecules[/tex]
Next, we can solve the following setup by starting with the 67.8 moles of helium and obtaining the required molecules as follows:
[tex]67.8mol*\frac{6.022x10^{23}molecules}{1mol}\\\\=4.08x10^{25} molecules[/tex]
Best regards!
If you start with 30.0 grams of sodium fluoride, how many grams of magnesium fluoride will be produced?
Answer:
22.2 g of MgF₂
Explanation:
We star from the reaction:
NaF → sodium fluoride
Mg → Magnesium
2NaF + Mg → MgF₂ + 2Na
2 moles of sodium fluoride react to 1 mol of Mg in order to produce 1 mol of magnesium fluoride and 2 moles of sodium.
We convert mass of the reactant to moles:
30 g . 1mol / 41.98 g = 0.715 mol
We assume that Mg is in excess
As ratio is 2:1, if we have 0.715 moles of NaF we may produce the half of moles, of MgF₂
0.715 mol /2 = 0.357 moles of MgF₂
We convert moles to mass: 0.357 mol . 62.30g /mol = 22.2 g
24.
What is the molar mass of CO2?
Answer:
The molecular mass of carbon dioxide is 44.01amu
Can someone help me with these??
Answer: let me see I gotta do the work first then I’ll give you the answers
Explanation:
A substance conducts electricity because of free moving, charged particles.
What are the free moving, charged particles in a:
• carbon electrode (made from graphite)
• molten mixture of aluminium oxide and cryolite
• metal wire?
Answer:
105Comprendes las leyes de la electricidadAprende másClasificación de los materialesUn medio o material que permite el movimiento de las cargas eléctricas (electrones) en respuesta a una fuerza eléctrica, se denomina conductor. Los materiales conductores son los que se pueden electrizar en toda su superficie, debido a que los electrones se mueven libremente. Los metales por lo general son buenos conductores de la electricidad.El flujo de las partículas cargadas es lo que se conoce como corriente eléctrica. Las partículas cargadas en una cierta dirección de un conductor chocan con los átomos, produciendo una pérdida de energía que se manifiesta en forma de calor.Una medida de oposición que presentan las partículas cargadas al moverse libre-mente en una cierta dirección de un material conductor es lo que se conoce como resistencia eléctrica.Los materiales que no permiten que las partículas cargadas se muevan hacia otra región del material a una fuerza eléctrica, son llamados aislantespor ejemplo, la madera.Existen otros tipos de materiales cuyas propiedades son intermedias entre los conductores y aislantes; se llaman semiconductores.Algunos ejemplos de materiales con estas características son:
Explanation:
A student finds that the water's temperature went from 18oC to 38oC. Calculate how many calories are in the peanut.
Answer:
567 calories.
Explanation:
There 567 calories in 100 grams of peanut. In 100 grams of peanut, 49 gram is the fat, 26 grams of protein, 16 grams of carbohydrates, Sodium is 18 mg, Potassium is 705 mg. Calcium is present in peanut about 9%, Iron is 25% , Vitamin B-6 is 15% and Magnesium is 42% of their total weight. Oil content is high in the Peanut so this is the reason for high calories in peanut. It is a good source of proteins and potassium.
i need help on this question
NO LINKS!
Answer:
2 experimental
Explanation:
What would make oppositely charged objects attract each other more?
increasing the positive charge of the positively charged object and increasing the negative charge of the negatively
charged object
decreasing the positive charge of the positively charged object and decreasing the negative charge of the negatively
charged object
increasing the distance between the positively charged object and the negatively charged object
maintaining the distance between the positively charged object and the negatively charged object
Answer: increasing the positive charge of the positively charged object and increasing the negative charge of the negatively charged object.
Explanation:
edge
Answer:
Your answer is A.
Explanation:
A loose pile of rocks and soil travels in a single large mass the mass moves a short distance downhill which mass movement does this describe
A. Creep
B. Erosion
C. Landslide
D. Slump
Need help on this question asap pleasee
Type the correct answer in the box. Express your answer to three significant figures. Iron(II) chloride and sodium carbonate react to make iron(II) carbonate and sodium chloride: FeCl2(aq) + Na2CO3(s) → FeCO3(s) + 2NaCl(aq). Given 1.24 liters of a 2.00 M solution of iron(II) chloride and unlimited sodium carbonate, how many grams of iron(II) carbonate can the reaction produce? The reaction can produce grams of iron(II) carbonate.
Answer:
The reaction can produce 287 grams of iron(II) carbonate
Explanation:
To solve this question we must find the moles of iron(II) chloride that react. Using the chemical equation we can find the moles of iron(II) carbonate and its mass -Molar mass FeCO3: 115.854g/mol-
Moles FeCl2:
1.24L * (2.00mol / L) = 2.48 moles FeCl2
As 1 mol FeCl2 produce 1 mol FeCO3, the moles of FeCO3 = 2.48 moles
Mass FeCO3:
2.48mol * (115.854g / mol) =
The reaction can produce 287 grams of iron(II) carbonateAnswer:
287
Explanation:
Which part of the atom is most directly involved in chemical bonding?
Answer:
Electron
Explanation:
That big lorry hit the new car.change to passive voice
How many moles of hydrogen gas (H2) are required to react completely with 0.75 moles of nitrogen
gas (N2)?
Answer:
2.25 moles H2
Explanation:
The equation N2+ 3H2 > 2NH3
1 mol of N2 gives 3 mol of H2
Then
. 75 mole N2 give 3*.75 = 2.25 moles of H2
Al+3 and I-
what is the chemical formula and what is the name of the compound
Answer:
AlI3 is the chemical formula and the name of compound is Aluminium iodide.
5) answer is A
2NaHCO3(s) + 129k) - Na2CO3(s) + H2(g) + CO2(g)
This equation indicates that AH is
and energy must be
to complete the reaction.
A)
positive; added
B)
negative; added
C)
positive; released
D)
negative; released
Answer:
A) positive; added
Explanation:
Based on the reaction:
2NaHCO3(s) + 129kJ → Na2CO3(s) + H2(g) + CO2(g)
2 moles of NaHCO3 requires 129kJ to produce 1 mole of Na2CO3, 1 mole of H2 and 1 mole of CO2.
That means, the energy must be added being, thus, an exothermic reaction. The exothermic reactions have ΔH >0.
Thus, right answer is:
A) positive; added
What is the empirical formula of a compound containing 90 grams carbon, 11 grams hydrogen, and 35 grams nitrogen? (5 points)
Question 3 options:
1)
C3H4N
2)
C2H4N
3)
C4H10N
4)
C2H5N
Answer:
1) C₃H₄N
Explanation:
The empirical formula of a compound is the formula that gives the positive integer ratio of the atoms of the elements in the compound in the simplest form
The mass of carbon in the compound = 90 grams
The molar mass of carbon = 12.011 g/mol
The number of moles of carbon = 90 g/(12.011 g/mol) ≈ 7.4931313 moles
The mass of hydrogen in the compound = 11 grams
The molar mass of hydrogen = 1.00794 g/mol
The number of moles of carbon = 11 g/(1.00794 g/mol) ≈ 10.913348 moles
The mass of nitrogen in the compound = 35 grams
The molar mass of nitrogen = 14.0067 g/mol
The number of moles of carbon = 35 g/(14.0067 g/mol) ≈ 2.49880414 moles
Dividing by the smallest mole ratio gives;
The proportion of carbon, C = 7.4931313/2.49880414 = 2.9987 ≈ 3
The proportion of nitrogen, N = 10.913348 /2.49880414 = 4.367 ≈ 4
The proportion of nitrogen, N = 2.49880414 /2.49880414 = 1
Therefore, the empirical formula of the compound is C₃H₄N.
Answer:
1) C₃H₄N
Explanation:
took test
Your simulation involved 100 atoms and eight half-life cycles. For half-life cycles 9 and later, how many radioactive nuclei would you expect to be present?
Answer:
you would expect 0 radioactive nuclei to be present
Explanation:
got it right on the assignment
a. 35
b.65
c.81
d.180
I think it's 80 . 12
pls tell me if correct
Which pH is the most acidic
Answers choices below
A. 7
B. 14
C. 0.5
D . 1
C. 0.5
This is the answer.
(assuming that the D option is 1, if it is 0.1 then the answer is 0.1)
[tex]0.5[/tex]
Explanation:
As you know that decreasing in the concentration of OH- (i.e., 14, 13, 12, 11,..) makes to increase in the concentration of H+ ions (5,4,3,2,1).
Which of the following best explains the relationship between peak to peak amplitude and semi amplitude
Answer:
Which of the following best explains the relationship between peak-to-peak amplitude and semi-amplitude? Semi-amplitude is half the distance of the peak-to-peak amplitude. Semi-amplitude is the same distance as the peak-to-peak amplitude.
Clouds are made up of tiny droplets of water. Which two spheres are clouds a
part of?
A. Biosphere
B. Geosphere
C. Hydrosphere
D. Atmosphere
Which of the following is not an ionic compound
Answer:
bR2 since it is nonpolar
Most types of commercial flour are sifted
before they are packaged and sold in the
store. What effect do you think this has
on the quality of the flour?
Answer:
It improves the texture of the flour
Explanation:
Flour is supposed to have a very fine texture. Commercial flour is not expected to occur in lumps. Lumps reduce the utility of the flour.
Hence, to improve the texture of the commercial flour, it is thoroughly sifted to ensure that there are no large lumps in the flour.This is so important when producing cake flour where the achievement of fine texture is of utmost priority.
Choose ALL
BIOTIC factors
Lesson 5.01
Question 1 options:
protists
animals
fungi
plants
salinity
Answer:
protists
animals
fungi
plants
Explanation:
i took the test let me know if im wrong tho
The biotic factors from the following options are protist, animals, fungi, and plants. Options A, B, c, and D are correct.
What are biotic factors?Biotic factors are those factors which can grow, and reproduce themselves.
Plants, animals, protists, and fungi are biotic factors that live, eat ad reproduce.
Salinity is the quality of any solution. It is not a biotic factor.
Thus, the correct options are A, B, c, and D.
Learn more about biotic factors
https://brainly.com/question/27430655
#SPJ2
Select the correct mass for each of the samples described below.
3.01 × 1023 molecules H2O
Answer:
9.00 g H2O
Explanation:
Convert molecules to grams using stoichiometry
(3.01 * 10^23 molecules) * (1 mole H2O / 6.022 * 10^23 molecules) * (18.01 g / 1 mole H2O) = 9.00 g H2O
Answer:
answer in picture
Explanation:
why there might be something else in the water besides the reddish-brown substance?
Answer:
Tbe reddish brown substance might be the rust that formed overtime in a iron tap and over the course of time mixed with other dust and particles it might have formed another substance .
The reddish brown substance is iron oxide which is formed by the reaction of iron materials with water and air. This oxide layer above the surface of metallic parts is called rust.
What is iron oxide ?The Fe is a reddish metal more reactive towards the air and water as well. Fe is a very common in the manufacturing of many household materials. However, by the action of air and water these metallic parts undergo corrosion.
Corrosion is a chemical change involving the formation of oxide layer over the metallic surface which eventually corrode the substance and make it unusable.
Fe reacts with oxygen of water or air forming the reddish brown iron oxide Fe₂O₃ that is what called the rust. Rust can be seen in needles, vehicle parts made of iron etc.
Find more on corrosion:
https://brainly.com/question/28302789
#SPJ2
Who goes to K12 and if so what grade
Answer:
I do. I am in tenth. What area are you in?
Explanation:
Answer:
8th finna be in 9th wbu
Explanation: