Drag and drop the labels provided into the boxes below to explain how the Earth-Sun-Moon system results in these seasons on Earth.
Answers
Related Questions
A 4.00g sample of gas is found to exert a pressure of 1.71 atm when confined in 3.60L container at a temperature of 24
Answers
Answer:
There are 0.311 moles of gas in the tank
Explanation:
Complete question
A 4.00g sample of gas is found to exert a pressure of 1.71 atm when confined in 3.60L container at a temperature of 241 K. Find the number of moles of the gas
Solution
As we know
[tex]PV = nRT[/tex]
where P is the pressure of the gas in atm
V is the volume in liters
n is the number of moles
R is the gas constant = 0.08206 L·atm/K·mol
and T is the temperature in Kelvin
Substituting the given values in above equation, we get -
[tex]1.71 * 3.60 = n * 0.08206 * 241\\n = 0.311[/tex]
There are 0.311 moles of gas in the tank
definition of atomic number
Answers
The atomic number or proton number (symbol Z) of a chemical element is the number of protons found in the nucleus of every atom of that element. The atomic number uniquely identifies a chemical element. It is identical to the charge number of the nucleus. In an uncharged atom, the atomic number is also equal to the number of electrons.
Answer:
its basically represents the number of protons in the nucleus which in a neutral atom equals the number of electrons outside the nucleus and that determines the place of the element in the periodic table
Explanation:
sry i its too long
hope it helps
Weathering (breaking off sediments upriver), erosion (moving the sediments down river) and finally deposition caused the changes in the river.
What helps hold sediments in place to prevent erosion?
Answers
Answer:
Explanation:
Maintaining a healthy, perennial plant cover.
Mulching.
Planting a cover crop – such as winter rye in vegetable gardens. ...
Placing crushed stone, wood chips, and other similar materials in heavily used areas where vegetation is hard to establish and maintain.???
Stem cells can differentiate into how many types of body cells?
Answers
Determine the volume of the product containing carbon produced when 15.0 g of C2H2 are reacted with an excess of oxygen gas
Answers
Answer:
25.8 L
Explanation:
Step 1: Write the balanced equation for the complete combustion of acetylene
C₂H₂ + 2.5 O₂ ⇒ 2 CO₂ + H₂O
Step 2: Calculate the moles corresponding to 15.0 g of C₂H₂
The molar mass of C₂H₂ is 26.04 g/mol.
15.0 g × 1 mol/26.04 g = 0.576 mol
Step 3: Calculate the moles of CO₂ produced from 0.576 moles of C₂H₂
The molar ratio of C₂H₂ to CO₂ is 1:2. The moles of CO₂ produced are 2/1 × 0.576 mol = 1.15 mol.
Step 4: Calculate the volume corresponding to 1.15 moles of CO₂
At standard temperature and pressure, 1 mole of CO₂ occupies 22.4 L.
1.15 mol × 22.4 L/1 mol = 25.8 L
If 34.2 g of NaOH are dissolved in water to make a 750 mL solution, what is the molarity of the solution?
Answers
Answer:
1.14 M
Explanation:
First divide the mass of NaOH by the molar mass of NaOH. Then divide by the volume to get molarity.
34.2 g / 39.997 g/mol = 0.855 mol NaOH
0.855 mol NaOH / 0.750 L = 1.14 M NaOH
The songs of birds are part of a ritual to attractpotential partners of their own species. The song presents specific patterns recognized only by membersof the same species. What advantage does this present for the species of birds?
Answers
Answer:
Explanation:
Bird courtship and mating dances include many unique ways to attract mates. Learn about their courtship behaviors and why they matter. ... When birders recognize courting birds, they can be sure to avoid disturbing ... the charming songs used to woo partners can help distinguish species so birds are sure ...
4. From the diagram above, what
would need to be the correct genotype for the two green beetles to have the outcome of generation 2?
a HH x hh
b. Hh x Hh
c. Hhxhh
d. Hh x HH
Answers
10 How does no-till farming help the environment?
A It decreases soil erosion.
C It increases fertilizer use.
B It increases soil removal.
D It decreases crop yield.
Answers
Answer: Answer is A it will decrease soil erosion
Explanation:it just will trust me
Answer:
A.
Explanation:
the soil will not loosen when u till it
If a lab requires you to use 1.25 mol oxygen gas in a chemical reaction, how many molecules of oxygen will you need?
Answers
Answer:
7.53*10²³ molecules of oxygen will you need.
Explanation:
Avogadro's Number or Avogadro's Constant is called the number of particles that make up a substance (usually atoms or molecules) that can be found in the amount of one mole of said substance. Its value is 6.023*10²³ particles per mole. Avogadro's number applies to any substance.
You can then apply the following rule of three: if by definition of Avogadro's Number 1 mole of oxygen gas contains 6.023*10²³ molecules, 1.25 moles contains how many molecules?
[tex]amount of molecules=\frac{1.25 moles*6.023*10^{23}molecules }{1 mole}[/tex]
amount of molecules= 7.53*10²³
7.53*10²³ molecules of oxygen will you need.
The results of photosynthesis as glucose and oxygen
A) Photosynthesis
B)Products
C)Chloroplasts
D)Glucose
Answers
Answer:
Products
Explanation:
Water circulates through Earth's water cycle by changing its _____.
A. state
B. acidity
C. turbidity
D. composition
PLsss I need answers T-T
Answers
The answer would thus be A.
C + 2ZnO → CO2 + 2zn
How many grams of
carbon dioxide will be
produced if 135 grams
of ZnO is completely
reacted?
Answers
Answer:
36.5 g CO2
Explanation:
First, Write a Balanced Equation
C + 2 ZnO → CO2 + 2 Zn
Useful Information,
MW of ZnO = 81.41 g
MW of CO2 = 44.01 g
135 g ZnO x (1 mol ZnO / 81.41 g ZnO) x (1 mol CO2/2 mol ZnO) x ( 44.01 g CO2 / 1 mol CO2 ) = 36.5 g CO2
A student adds 5400.0mL of 0.15M NaOH to 201.2mL of 4.0M NaOH. What is the final [NaOH]?
Answers
Answer:
0.287 M
Explanation:
Multiply the concentration of each solution by the volume of each (in liters) to get the moles of NaOH in that solution.
0.15 M • 5.4000 L = 0.81 mol NaOH
4.0 M • 0.2012 L = 0.80 mol NaOH
Add the mol of NaOH together to get the total --> 0.81 + 0.80 = 1.61 mol NaOH
Divide by the total volume of solution (5400.0 mL + 201.2 mL = 5,601.2 mL = 5.6012 L)
1.61 mol / 5.6012 L = 0.287 M NaOH
Given this balanced equation: CS2 + 3 O2 CO2 + 2 SO2
Calculate how many moles of SO2 can be produced with when given 4 moles of CS2.
58.67 g
Now calculate how many moles of SO2 can be produced with when given 4 moles of O2.
Which one is the limiting reactant (4 moles CS2 or 4 moles of O2)? How do you know?
Answers
Answer: The FitnessGram PACER Test is a multistage aerobic capacity test that progressively gets more difficult as it continues. The test is used to measure a student's aerobic capacity as part of the FitnessGram assessment. Students run back and forth as many times as they can, each lap signaled by a beep sound.
Explanation:
Ch.3, S5, page
69, BOS
Calculate the mass of 1.5 moles of calcium atoms.
NA=6x 1023
Mass=
g give your answer to two significant figures.
Answers
Answer:
60g
Explanation:
The molar mass of a substance (Atom or molecule) is defined as the mass in grams that 1 mole of substance (6x10²³ particles of this substance) weighs. Using the periodic table of elements we can know the molar mass of each atom.
For example, the molar mass of Calcium is 40.078g / mol.
That means the mass of 1.5 moles of calcium atoms must be:
1.5 moles * (40.078g / mol) =
60gWhen Svante Arrhenius first proposed his acid base theory, he was a doctoral candidate. His professors thought his ideas were unfounded. Within a decade, the Arrhenius theory of acid base was widely accepted and praised within the scientific world. Arrhenius defined acids as compounds having an ionizable hydrogen and bases as compounds with ionizable hydroxides. Eventually scientists adopted a broader theory which includes more compounds to define acids and bases. The Bronsted-Lowry acid base theory defines an acid as a _______ and a base as a ______________.
Answers
Answer:
proton donar
proton acceptor
Explanation:
From the given information of the question, Arrhenius acid and base concept is explained, from which a better term to define an acid and base is defined, known as The Bronsted-Lowry acid base theory.
According to The Bronsted-Lowry acid base theory -
An acid is the species which can readily donate a proton, where as, a base is the species, which can readily accept a proton.
Hence, the correct answer is as follow -
proton donar
proton acceptor
Answer:
proton donar
proton acceptor
Explanation:
Which of these is a learned behavior of a dog?
1.Begging for food
2.Drinking water
3.Panting on a hot day
4.Chewing on a bone
Answers
Compare a low-dose rate internal radiation treatment to a high dose rate internal treatment. What do you think are the positives and negatives of each?
Answers
During intracavitary radiation, the radioactive source is placed in a body cavity (space) , such as the rectum or uterus.
With interstitial radiation, the implants are placed in or near the tumor, but not in a body cavity. The implant procedure is usually done in a hospital operating room designed to keep the radiation inside the room. You’ll get anesthesia, which may be either general (where drugs are used to put you into a deep sleep so that you don’t feel pain) or local (where part of your body is numbed).
One or more implants is put into the body cavity or tissue with an applicator, usually a metal tube or a plastic tube called a catheter. Imaging tests (an x-ray, ultrasound, MRI, or CT scan) are usually used during the procedure to find the exact place the implant needs to go.
Before being placed, implants are kept in containers that hold the radiation inside so it can’t affect others. The health professionals handling the implants may wear special gear that protects them from exposure once the implants are taken out of the container. High-dose-rate (HDR) brachytherapy allows a person to be treated for several minutes at a time with a powerful radioactive source that’s put in the applicator. The source is removed after 10 to 20 minutes. This may be repeated twice a day over a few days, or once a day over the course of a few weeks. The radioactive material is not left in your body. The applicator might be left in place between treatments, or it might be put in before each treatment.
People getting HDR sometimes stay in the hospital if it involves multiple day treatments and if the applicator is left in place. There may be special precautions to take after the treatment, so be sure to talk to the cancer care team about this. In this approach, the implant gives off lower doses of radiation over a longer period.
Some implants are left in from 1 to a few days and then removed. You’ll probably have to stay in the hospital, sometimes in a special room, during treatment. For larger implants, you might have to stay in bed and lie still to keep it from moving.
Some smaller implants (such as the seeds or pellets) are left in place and never taken out. Over the course of several weeks they stop giving off radiation. The seeds or pellets are about the size of rice grains and rarely cause problems. If your implants are to be left in, you may be able to go home the same day they’re put in. There may be special precautions to take, so be sure to talk to the cancer care team about this.
a substance made up of only atoms of one type is called
Answers
Answer: chemical element
Explanation: A chemical element is a substance that contains only one type of atom, which is the smallest particle of an element.
How much water must be added to 40.0 g of CaCl2 to produce a solution that is 35.0 wt% CaCl2?
Answers
The mass of water present in the solution is 21.5 g.
What is concentration?Concentration refers to the amount of solute in a solution. There are various ways of expressing concentration such as;
Molar concentrationMass concentrationPercentage concentrationWe have the following information;
Percent concentration = 35.0 %
mass of solute = 40.0 g
Mass of water = ?
So;
35 = x/40 + x × 100/1
35 = 100x/40 + x
35(40 + x) = 100x
1400 + 35x = 100x
1400 = 100x - 35x
1400 = 65x
x = 1400/65
x = 21.5 g
Hence the mass of water is 21.5 g.
Learn more about percent concentration: https://brainly.com/question/1600559
How much heat, in kJ, is released when 6 mol of water at 0°C freezes to ice at 0°C if ΔHsolid for water = –6.01 kJ/mol?
Answers
Answer:
12.3 kJ
Explanation:
For a given substance, the molar heat of fusion basically tells you one thing from two perspectives
how much heat is needed in order to melt one mole of that substance at its melting point
how much heat must be removed in order to freeze one mole of that substance at its freezing point
It is very important to realize that the molar enthalpy of fusion will carry a positive sign when you're dealing with melting and a negative sign when you're dealing with freezing.
Consider the table below that summarizes the types of materials that can block the 3 different types of radiation. Based on the table, at which numbered spot in the table does each type of radiation belong. 1 = beta; 2 = alpha, 3 = gamma
Answers
Answer:
D. 1 = gamma; 2 = alpha, 3 = beta
Explanation:
I apologize if this answer is late, but I got answered the question right on my "Types of Radioactive Decay" quiz :)
Hope this is helpful for others! :D
Based on the table, the type of radiation belong from 1 is the gamma rays, from 2 is the aplha rays and from 3 is the beta rays.
What are radiations?During the radioactive decay process, some amount of energy is released in the form of particles and that radiations will known as alpha rays, beta rays and gamma rays.
Gamma ray are mare energetic rays and will shielded by only lead and thick concrete materials.Beta rays are less energetic than gamma rays and will shielded by lead, cloth, paper, wood, aluminium foil and thick concrete materials.Aplha rays have very less amount of energy in it and it will be shielded by all above mention materials.Hence 1 is the gamma rays, 2 is the aplha rays and 3 is the beta rays.
To know more about radiations, visit the below link:
https://brainly.com/question/13909492
what ive learned about heat,sound and light
Answers
Answer:
they are all in parts of our life and we need them each for surviving.
Explanation:
Please help me find the answer , thank you.
Answers
Answer:
the answeer is definitely silicon.
Is the kool-aid man the jar or the liquid?
I know that this is for school but like i need to know
Answers
Answer:
I think both
Explanation:
WILL MARK BRAINLEST
Explain one way that you could lower the amount of trash that your family produces. Be specific in your example. Explain how it will actually lead to a lower amount of trash
Answers
CH3(ch2)2C(ch3)3 IUPAC name please?
Answers
Answer:
Explanation:
The name is of the compound is 3,3,4,4-tetramethylhexane.
???????????????????????
Answers
Answer:
B and D
Explanation:
Bc it has more fat than the other
Using this illustration, what is the chemical formula? Picture and possible answers are below.
Answers
The answer is It is NH3.....