Does the variable increase(1) or decrease(1) under the described conditions?
1. What happens to pressure as volume
increases?
2. What happens to pressure as temperature decreases?
3. What happens to volume as temperature decreases?
4. What happens to volume as the number of moles increase?
Answers
Answer:
Explanation:
Decreasing the volume of a contained gas will increase its pressure, and increasing its volume will decrease its pressure. In fact, if the volume increases by a certain factor, the pressure decreases by the same factor, and vice versa. Volume-pressure data for an air sample at room temperature are graphed in Figure 5.
Because the volume has decreased, the particles will collide more frequently with the walls of the container. ... When the volume decreases, the pressure increases. This shows that the pressure of a gas is inversely proportional to its volume. This is shown by the following equation - which is often called Boyle's law.
The kinetic energy of the gas molecules increases, so collisions with the walls of the container are now more forceful than they were before. As a result, the pressure of the gas doubles. Decreasing the temperature would have the opposite effect, and the pressure of an enclosed gas would decrease.
For a fixed mass of gas at constant temperature, the volume is inversely proportional to the pressure. That means that, for example, if you double the pressure, you will halve the volume. If you increase the pressure 10 times, the volume will decrease 10 times.
Temperature, pressure, volume and the amount of a gas influence its pressure.
Gay Lussac's Law - states that the pressure of a given amount of gas held at constant volume is directly proportional to the Kelvin temperature. If you heat a gas you give the molecules more energy so they move faster. This means more impacts on the walls of the container and an increase in the pressure.
i really hope some of this helped i would put more but its a lot too type
Related Questions
Which of the following chemical equations follows the law of conservation of mass?
Answers
Answer:
The third choice
Explanation:
The law of conservation of mass tells us that the mass of the reactants and products in a chemical reaction will be equal to one another. Equations follow the law of conservation of mass when they are balanced, which means that they have the same number and type of atoms on each side.
When individual atoms are counted, the third choice has the same number and type of atoms on each side: 1 gallium, three cesium and three fluorine.
What does the reaction rate say about a reaction?
O It tells what activation energy the reaction has.
O It tells if a catalyst was used in the reaction.
It tells how quickly products will be made.
It tells what the concentration of reactants is.
Previous
Answers
Answer:
It tells how quickly products will be made.
Explanation:
ap3
x
The reaction rate provides information about how quickly products will be made in a chemical reaction.
The reaction rate is a measure of how fast a chemical reaction proceeds over time. It provides information about the speed at which reactants are consumed and products are formed during a reaction. The reaction rate is typically expressed as the change in concentration of a reactant or product per unit of time.
The reaction rate is influenced by various factors such as the nature of the reactants, concentration of reactants, temperature, surface area, and the presence of catalysts. By measuring the reaction rate, scientists can gain insights into the kinetics of a reaction and understand the factors that affect its speed.
The reaction rate is particularly important because it allows us to predict and control the rate at which products are formed. It is useful in various applications, including industrial processes, pharmaceutical development, and environmental studies. By manipulating the reaction conditions, such as adjusting the concentration of reactants or introducing a catalyst, we can alter the reaction rate to achieve desired outcomes.
In summary, the reaction rate provides valuable information about the speed at which products are formed in a chemical reaction, allowing us to understand and control the kinetics of the process.
To learn more about reaction rate, here
https://brainly.com/question/13693578
#SPJ2
Sodium chloride, NaCl, can be used to melt snow. How many moles of sodium chloride are in a 10 kg bag?
Answers
Answer:
171 moles of sodium chloride
Explanation:
Number of moles = mass/molar mass
Molar mass of sodium chloride = 58.5 g/mol
mass of sodium chloride = 10 Kg or 10,000 g
Now, to obtain the number of moles of sodium chloride;
Number of moles = 10,000 g/58.5 g/mol
Number of moles = 171 moles of sodium chloride

A solution has a pOH of 5.
What is the pH?
Classify the solution as acid, base, or neutral.
Answers
Answer:
pH is the number given to a substance of how powerful it is before 7 or beyond 7.
the solution is an acid.
Explanation:
Pls mark BRAINLIEST
Answer:
August 15, 1971
The nine sheikhdoms still had not agreed on terms of union by 1971, however, prompting Bahrain to declare itself fully independent on August 15, 197
1.A solution has a pH of 5, calculate the pOH, [H+], and [OH-]. Classify the solution as an acid, base, or neutral solution.
it's an acid
Explanation:
I hope that this helps
Which statement correctly describes electrochemical cells?
A. Electrochemical cells involve only oxidation reactions.
B. Electrochemical cells involve only reduction reactions.
C. Electrochemical cells involve oxidation-reduction reactions.
D. Electrochemical cells do not involve oxidation-reduction reactions.
Answers
Answer: C. Electrochemical cells involve oxidation-reduction reactions.
Explanation: Oxidation occurs at the anode, and reduction occurs at the cathode.
What factors are different in diagrams A and B?
Answers
Answer:
Acceleration Of B IS greater
Explanation:
F= mass x accelerarion
Acceleration of ( A) =20÷5 =4
Acceleration of (B) =5
what is the limiting reactant of 20.0 moles of o2 react with 30.0 moles of h2 according to the following reaction ? 2H2 + O2 = 2H2O
Answers
Answer:
The limiting reactant is hydrogen.
Explanation:
According to the balanced equation for synthesis of water, hydrogen is used up twice as fast as oxygen -- we need two moles of H2 for every one mole of O2 when creating water.
Since we have 20 moles of oxygen, this means we would need twice as much hydrogen, or 40 moles, to use it all up. There is only 30 moles of hydrogen, which means that all the hydrogen will be used before the 20 moles of oxygen is used. Hydrogen limits production in this case.
We have that
From the Question we are told that
20.0 moles of o_2
30.0 moles of h_2
Therefore
The ratio
For more information on this visit
Tropical, temperate, and taiga refer to what type of biomes?
A. grasslands
B. deserts
C. the tundra
D. forests
Answers
Answer:
From my view the answer is
D. Forests
How to find the final product of Fe (II) + CI ?
Answers
The valency of iron (Fe) in this equation is 2
While, the valency of chlorine is 1
Therefore, we know that iron wants to give away 2 electrons to attain octet configuration, and chlorine wants to get an electron to attain octet configuration.
Also while find the products the number of atoms is similar to the oppostie valency
Fe = 1 atom , Cl = 2 atoms
Which will form FeCl₂
Happy to help :)
If you need any help pls ask
Aliyah found a tarnished silver dollar and recalled that tarnish results when metals react with oxygen or sulfur compounds in the air. She polished the silver dollar to remove the tarnish until it was shiny again. She also polished a copper bracelet and a gold ring. What physical property of these metals makes them shiny?
A. conductivity
B. ductility
C. luster
D. malleability
Answers
Answer:
C.
Explanation:
Luster
can someone list these in correct order? from least brigehst to brightest?
Answers
Pluto
Venus
Moon
Sun - most brightest
What is the correct name for the cyclic alkane shown on the right?
1,3-dimethyl, 3-ethylcyclohexane
1-ethyl, 1,4-dimethylcyclohexane
1-ethyl-1,3-dimethylcyclohexane
1-ethyl-1,3-dimethylcyclopentane
1,3 dimethyl, 3- ethylcyclopentane
A skeletal model of a six-sided polygon has a single line to a C H 3, and a bent line to a C H 3 from one corner. The second corner away from that counterclockwise also has a single line to a C H 3.
Answers
Answer: C
Explanation:
If the He H e injected into the abdomen produces a pressure of 22 mmHg m m H g and a volume of 2.7 L L at 31 ∘C ∘ C , how many grams of He H e were used?
Answers
Answer:
1280.27 g
Explanation:
Pressure = 22 mmHg / 760 = 0.0289 atm (Converting to atm by dividing by 760)
Volume = 2.7 L
Temperature = 31 ∘C + 273 = 304 K
Mass = ?
Using the ideal gas equation;
PV = nRT
n = RT / PV = 0.0821 * 304 / ( 0.0289 * 2.7)
n = 319.86 mol
Mass = Number of moles * Molar mass
Mass = 319.86 * 4.002602
Mass = 1280.27 g
A student performs an experiment with three unknown fluids and obtains the following measurements: Fluid A: m = 2060 g, V = 2000 mL Fluid B: m = 672 g, V = 850 mL
Fluid C: m = 990 g,
V = 1100 mL
Answers
Answer:
fluid - A is 1.03
fluid -B is 0.790
fluid - C is 0.90
Explanation:
In our exprimetal fluid, the density of
fluid - A is 1.03
fluid -B is 0.790
fluid - C is 0.90
The fluid with high density settles at bottom of the beaker and least dense fluid forms layer on the surface .
Fluid A is 1.03
Fluid B is 0.790
Fluid C is 0.90
What is measurment?Measurment is a process by which we can measure any physical quantity with the help of different apparatus. For example if one can want to measure the distance than he can use the a simple measuring scale.
Distance can be measured in kilometer,meter, centimeter etc. Temperature can be measured with the help of glass tube thermometer as glass tube is a simple temperature measuring appratus and glass tube thermometer is used to measure temperature in fahrenheit (F).
Measurment is a general process which can be used by a common person in his daily life. Every common thing which we use in our routine life need to be measured like if we buy sugar it will be measured in kilogram or gram. If a person buy milk it can measured in liter.
Therefore,Fluid A is 1.03
Fluid B is 0.790
Fluid C is 0.90
Learn more about measurment here:
https://brainly.com/question/4725561
#SPJ2
What happens to the limiting reactant during the course of the chemical reaction?
Answers
Answer: The limiting reactant is the reactant that gets consumed first in a chemical reaction and therefore limits how much product can be formed.
Explanation:
^
Changes in the total amount of thermal energy provide evidence that chemical reactions have taken place. A chemical reaction in which energy has been absorbed is known as a(n):
Select one:
physical reaction.
endothermic reaction.
reversible reaction.
exothermic reaction.
Answers
Answer:
B. endothermic reaction
Explanation:
please ive been stuck on this one forever
Answers
Answer:
Melting-Solid-Liquid-Added
Freezing-Liquid-Solid-Removed
Vapourization-Liquid-Gas-Added
Condensation-Gas-Liquid-Removed
Sublimation-Solid-Gas-Added
Deposition-Gas-Solid-Removed
Explanation:
What will happen to a soccer ball that is rolling across a field if an unbalanced force of friction is acting on the soccer ball?
A. The soccer ball will gradually move slower and slower until it stops.
B. The soccer ball will continue to move at a constant speed.
C. The soccer ball will move at a constant speed for a while, then slow down and stop.
D. The soccer ball will slow down for a while and then move at a constant speed without stopping.
Answers
Which of the following is most likely a chemical reaction?
Group of answer choices
Two solid powders are combined and shaken. The substances form a mixture.
A solid is stirred into a liquid solution. The temperature of the solution decreases.
Three liquids are poured into a beaker and swirled. One of the liquids settles at the bottom.
A liquid is heated until it reaches its boiling point. Vapor is created.
Answers
Answer:
Two solid powders are combined and shaken. The substances form a mixture.
Which group on the periodic table has the greatest number of metallic elements? O A. Group 18 (VIIIA) O B. Group 2 (IIA) OC. Group 13 (IIIA) O D. Group 7 (VIIB)
Answers
Answer: 18
Explanation:
i took a test and reviewed it and it said 18
On the periodic table, group IA has the most metallic elements.
What is Periodic table?All identified chemical elements are arranged in rows (referred to as periods) and columns (referred to as groups) in the periodic table of chemical elements, also known as the periodic table, in ascending order of atomic number.Groups are the names given to the periodic table's columns. In the table, individuals who belong to the same group make bonds of the same kind and have an equal number of electrons in their atoms' outermost shells. The periods refer to the horizontal rows.Elements in the periodic table can be divided into groups and eras. The periodic table is organized into horizontal rows for periods and vertical columns for groupings. As you advance, the atomic number grows.To learn more about Periodic table refer to:
https://brainly.com/question/15987580
#SPJ2
A 40.0L tank of ammonia has a pressure of 12.7kPa. Calculate the volume of the ammonia if its pressure is changed to 8.4 kPa while its temperature remains constant
Answers
Answer:
60.5 L
Explanation:
If the gas temperature is constant, we can use Boyle's law:
P1V1 = P2V2
V2 = P1V1 / P2
P1 = 12.7 kPa
V1 = 40.0 L
P2 = 8.4 kPa
V2 = (12.7 kPa) (40.0 L) / (8.4 kPa) = 60.5 L
Which of these is a compound?
A. Na
B. Cl
C. NaCl
D. C
Answers
Answer:
the answer is B
hope this is the answer you are looking for
Explanation:
The equation A+ BX à AX + B is the general equation for a
Answers
Answer: d
Explanation:
took the test
Bronsted Lowry reactions can use hydroxide ions.
True
False
Answers
Answer:
f
Explanation:
Mg + Cu2+ —> Mg2+ + Cu
a) why is this a redox reaction?
b) identify the oxidizing agent. Give reason for your answer
answer any of them you want please
Answers
Explanation:
Since the oxidation state of Mg is changed to +2 from 0, it is oxidized. (as it is increased)
Similarly, oxidation state of Cu is changed to 0 from +2, it is reduced. (as it is decreased)
Since oxidation & reduction occur at the same time, it is redox reaction.
As Mg is being oxidized, other one must be the oxidizing agent.
Cu is the oxidizing agent
2) Why do some earthquakes cause more damage than others?
Answers
Answer:
Earthquakes are more intense the faster the planet's crust slams together, which explains why the shaking causes so much damage in some of the most populated areas around mountain chains. ... One reason for this connection is that when two plates come together quickly, the area over which an earthquake occurs is larger.Explanation:
hey y'all i just want to know, do whales and dogs have a common ancestor?
Answers
yes
Explanation:
Which suggests that in an earlier time whales and dogs could have evolved from the same organism. the common ancestor in the 2 animals share notible traits. the pakicets was one of the whales ancestors and the grey wolf was the dogs ancestor.
What would happen to the position of the equilibrium when the following
changes are made to the equilibrium system below?
250 (8) - 250_(g) + O2(g)
Sulfur trioxide is removed from the system.
A. Shifts Left
B.Shifts Right
Answers
Hopefully it’s right .
What happens to the average speed of gas molecules as the temperature increases? Why?
Answers
Answer:
Average speed increases because average kinetic energy increases.
Explanation:
Temperature is the measure of the average kinetic energy of a system. As temperature increases, so will kinetic energy. As kinetic energy increases, speed increases.
helpp
simplify the meaning of these
circuit
electric current
voltage difference
ohms law
resistance
Answers
Answer:
circuit
electric current
voltage difference
ohms law
resistance
Explanation:
Circuit - a roughly circular line, route, or movement that starts and finishes at the same place.
Electric current - A net unidirectional movement of electrons, or other charge carriers, caused by a potential difference
Voltage difference - A potential difference of one Volt is equal to one Joule of energy being used by one Coulomb of charge when it flows between two points in a circuit.
Ohms law -a law stating that electric current is proportional to voltage and inversely proportional to resistance.
Resistance - The refusal to accept or comply with something; the attempt to prevent something by action or argument.