Answer:
I do not understand.
Explanation:
What do you mean by that?
Yes I know science but why are you asking a question like this?
A first order reaction has a rate
constant of .001 sec-1. What is the
half life in seconds) of this reaction if
the initial concentration is 2.0 M?
-hurry it’s a test
Answer:
one-half
Explanation:
cuz for a first order reaction is a half life independent of concentration and constant over time
What is 24.3 – 15.45 when accounting for sig fig rules?
Answer:
8.85 because im smart
Ba(OH)₂ + 2 HBr --> BaBr₂ + 2 H₂O is this a double replacement reaction
Answer:
The answer is Yes
Explanation:
Barium Hydroxide + Hydrogen Bromide = Barium Bromide + Water =
Double Displacement
If you have 4 moles of barium hydroxide, how many moles of oxygen atoms do you
have?
Answer:
8 moles of oxygen.
Explanation:
The chemical formula for barium hydroxide is Ba(OH)₂
This means one mole of barium hydroxide contains one mole of barium, two moles of hydrogen, and two moles of oxygen. If you have four moles of Ba(OH)₂ you will have four times the amount that is found in one mole.
4 moles of Ba(OH)₂ will have 8 moles of oxygen.
The number of moles of oxygen atoms we have in the compound is 8 moles .
The chemical equation for barium hydroxide is as follows:
Ba(OH)₂
According to the compound we have 1 atom of barium, 2 atoms of oxygen and 2 atoms of hydrogen.
Therefore, 4 moles of the compound can be represented as follows;
4 Ba(OH)₂
This means we have 4 atoms of barium, 8 atoms of oxygen and 8 atoms of hydrogen.
Therefore, we have 8 moles of oxygen atoms or 4 moles of oxygen molecules.
learn more: https://brainly.com/question/12228235?referrer=searchResults
Doug used a magnet to move a .025kg ball. The magnet exerts a force of 5N, which causes the ball to begin moving. What is the acceleration of the ball when it begins to move?
Answer:
[tex]a=200\ m/s^2[/tex]
Explanation:
Given that,
The mass of a ball, m = 0.025kg
The force exerted by the magnet, F = 5 N
We need to find the acceleration of the ball when it begins to move. Let a be the acceleration. The net force of the ball is given by :
F = ma
Where
a is acceleration of the ball
[tex]a=\dfrac{F}{m}\\\\a=\dfrac{5}{0.025}\\\\a=200\ m/s^2[/tex]
so, the required acceleration of the ball is [tex]200\ m/s^2[/tex].
3. What do you think is the primary reason why the Unionid mussel population declined whenever there is a dramatic increase in the Zebra mussel population?
When the Zebra arrived they ate all the food in the area leaving Unionid numbers to decline and die as they have no food to eat.
Sodium chloride is an ionic compound - it has a melting point of 800oC whereas chlorine is a gas has a melting point of -1200C. Explain the differences in melting points of these 2 in terms of their structure and bonding
Answer:
Our discussion up to now has centered on types of bonds that involve. This kind of bonding is called ionic bonding (as you are almost certainly already aware). NaCl is a solid at room temperature, with a very high melting point (801 °C), similar highly reactive metal – sodium (Na), and a pale green gas – chlorine (Cl2).
Explanation:
I hope this is what you needed. I also hope that you have a great day.
Which of the following conditions creates the largest waves?
Question 3 options:
strong winds that blow in short spurts over a small distance
strong winds that blow over a great distance for a long time
strong winds that blow for a long time over small distances
Answer:
strong winds that blow in short spurts over a small distance
Explanation:
Generally, the most common factor that causes the largest waves in the ocean is winds. this is also called wind-driven waves of the ocean when the surface wind flows on the surface of the ocean, this disturbance creates the friction between surface wind and surface of the ocean which creates waves in the ocean
Answer:
B
Explanation:
k-12 test
Regarding water molecules, adhesion is best described as * the attraction water molecules have to other water molecules the attraction water molecules have to ionic substances the attraction water molecules have to polar substances the attraction water molecules have to other surfaces
Answer:
the attraction water molecules have to other surfaces
Explanation:
Adhesion is defined as the attractive forces between unlike substances, e.g water moving up a capillary tube.
Adhesion is the tendency of dissimilar particles or surfaces to cling to one another(Wikipedia).
So, what we mean by adhesion in this context, is the attraction water molecules to other surfaces.
Which of the following is NOT an example of a chemical reaction?
A loaf of bread is sliced with a knife
A loaf of bread is baked in an oven
A loaf of bread is digested in the stomach
A loaf of bread molds in a pantry
Answer: D
Explanation:
because mold is a chemical reaction with with the air that's why the put a date cause the bread can only last for so long in till the chemical reaction.But D is is right because your body has to go though a chemical reaction in or to digest it and and break it down even more.So D would be the right answer cause that's where most of your chemical reaction happens when food is swallowed into the stoamch i hope i was able to explain it as much as i can
6HCl(aq) + 2A1)
-
3H2(g) + 2AlCl3(aq)
1. How many moles of hydrogen are produced from 1.20 moles of aluminum?
Answer: 1.80 moles of [tex]H_2[/tex] will be produced 1.20 moles of aluminium.
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]
The balanced chemical reaction is:
[tex]6HCl(aq)+2Al(s)\rightarrow 3H_2(g)+2AlCl_3(aq)[/tex]
According to stoichiometry :
2 moles of [tex]Al[/tex] produce = 3 moles of [tex]H_2[/tex]
Thus 1.20 moles of [tex]Al[/tex] will produce=[tex]\frac{3}{2}\times 1.20=1.80moles[/tex] of [tex]H_2[/tex]
Thus 1.80 moles of [tex]H_2[/tex] will be produced 1.20 moles of aluminium.
A chemical reaction takes place in a closed system. The mass of the reactants before the reaction was 35 grams. What must the mass of the products of the reaction be, according to the law of conservation of mass?
Carbon C , reacts with excess sulfur dioxide , SO2 , to produce carbon disulfide, CS2 , and carbon dioxide, CO2 according to the following equation .
3C(s) + 2SO2(g) ⇉ CS2(I) + 2CO2(g)
How many grams of CS2 are produced when 6.00 moles of C reacts completely with excess amount of SO2 gas ?
Answer:
sorry sorry sorry sorry
*
What does the temperature measure?
A)Total Kinetic Energy of Matter
b) Average Potential Energy of Matter
C) Average Kinetic Energy of Matter
D)Total Potential Energy of Matter
Answer:
it would be C average kinetic energy
. Which of these choices would help explain why the Zebra mussel population was 0 in 1991, while the population of native Unionid mussels was over 3000 organisms per square meter?
a
The scientists had a hard time spotting the mussels that year.
b
The climate was too cold for the Zebra mussels to reproduce that year.
c
The Zebra mussels had not yet been introduced to the area.
d
The water was moving too fast for the Zebra mussels to survive that year.
2. Over the 18 years of data depicted here, which mussel species was generally more successful?
Unionid Mussels
Zebra Mussels
Answer:
C. The Zebra Mussels had not yet been introduced to the area.
2.
Unionid Mussels they had a headstart in 1990
Hi! I'm going to give brainliest to the person who answers this first/best. It has the answer choices. Thanks!
Answer:
the answer is electron....
27. What element has this electron configuration: 1s2 2s22p6 352 3p6 452
3d10 4p4
Choices:
Sulfur
Selenium
Arsenic
Tellurium
Answer:
Selenium
Explanation:
One way to figure this out is to count the electrons and add them up.
2+2+6+2+6+2+10+4 = 34 electrons
A neutral atom has the same number of electrons and protons. Protons tell us the atomic number of an element. Element number 34 is Selenium.
Another way to figure it out is to look at just the highest "s" or "p" level of the electron configuration, and then see which element corresponds to that. This element has a 4s and a 4p, so I will look at 4p. The configuration is 4p4, so I will look at the 4th row of the periodic table (4p4) in the "p" block (4p4) and the 4th element in the "p" block (4p4). That's selenium :)
blank is most if the compounds that make up living things?
Answer:
carbon
Explanation:
Carbon forms compounds that make up about 18 percent of all the matter in living things. The processes by which organisms consume carbon and return it to their surroundings constitute the carbon cycle.
where do cells get the instructions on how to build proteins ? help
Answer:
Inside the DNA molecules
Answer:
Genes give instructions to proteins; protein structure determines traits.
Explanation:
Nitric acid is a highly reactive acid with the chemical formula HNO3. It is a clear, colorless and odorless liquid at room temperature that is nonflammable. How many different elements make up one molecule of nitric acid? A. Three B. Four C. Five D. Two
Nitric acid, is a highly corrosive mineral acid. The pure compound is colorless, but older samples tend to acquire a yellow cast due to decomposition into oxides of nitrogen and water.
There are THREE different elements and a total of FIVE atoms in nitric acid.
The formula for nitric acid is HNO3. This means there is one atom of hydrogen, one atom of nitrogen, and three atoms of oxygen in one molecule of nitric acid.
So, Thus, your answer will be FIVE if you're counting the molecules but if you are counting the elements then it is THREE.
-Snooky
does liquid water have constant density
Answer:
yes
Explanation:
Unlike a gas, a liquid does not disperse to fill every space of a container, and maintains a fairly constant density. A distinctive property of the liquid state is surface tension, leading to wetting phenomena. Water is, by far, the most common liquid on Earth.
hope this helps
brainliest?!
This graph shows how the potential energy of a reaction system changes
over time. Which statement is true for this system
A. The potential energy of the reactants is greater than the potential
energy of the products.
B. The height of the curve at point A represents the activation energy.
C. The height of the curve at point B represents the activation energy.
D. The potential energy of the products is greater than the potential
energy of the reactants.
Answer:
Answer is C since activation energy is needed in a reaction
Potential energy is the energy present in the reactions. The potential energy of the reactant in the graph is more than that of the product. Thus, option A is accurate.
What is potential energy?Potential energy is the energy of the reaction that results in the formation of products. The potential energy is reduced in the exothermic reactions as energy is released along with the products.
The bonds present in the reactants in the reaction mixture split in the presence of the activation energy to release energy and form the product.
Therefore, option A. the graph shows the greater potential energy of the reactant.
Learn more about potential energy here:
https://brainly.com/question/2292813
#SPJ2
Ella is interested in combining substances to form a new material.
She read about some of the products chemists have discovered. She learned that sometimes synthetic materials are created accidentally. For instance, a chemist working on plastic gun sights synthesized a very sticky material accidentally. Which product had he accidentally made?
A. a coil spring toy
B. a heavy-duty adhesive glue
C. a new sweetener
D. a non-stick surface
please hurry
If you begin with 32.0 grams of oxygen and all of the hydrogen that you need, how many grams of water can you make?
The movement of water both on and
above Earths surface
The movement of water on and above the earth's surface is called the hydrologic cycle, or the water cycle. Hope this helps!
under what conditions will the particles of a substance have the most energy
Answer:
All particles have energy, and the energy varies depending on the temperature the sample of matter is in, which determines if the substance is a solid, liquid, or gas. Solid particles have the least amount of energy, and gas particles have the greatest amount of energy.
Question 14 (1 point)
A magnesium atom has 11 neutrons. What is the mass of this magnesium atom?
Answer:
Mass=23
Explanation:
Mass= Protons + neutrons
Atomic number is the number of protons in magnesium.
Atomic number =12...So there are 12 protons
12p + 11n = 23
Why are scientists worried that climate change will cause these toxic algae blooms to become more frequent?
Answer: Eutrophication is the enhancement of the growth of algae in the water body.
Explanation:
The scientists are worried for the climate change as if the climate changed to prolonged rainy then the frequent raining can remove toxic chemicals from the agricultural sites, landfills, industries, and from other locations and deposit them to the water body (river, lakes, ponds, and others). The deposition of the salts of nitrogen, phosphorus, and sulfur promotes the growth of algae in the water body. This leads to reduction in the concentration of oxygen in the water body. This is called eutrophication. The lack of oxygen can lead to mortality of aquatic animals.
How many grams are in
.093 liters of o2, gas at STP?
Answer:
0.13 grams of O2
Explanation:
Just did worksheet
What are the lessons that you learn from nature
Answer:
Nature is important
Explanation: