Answer:
a. 0.5dm³
b. 5x10⁻³dm³
Explanation:
a. A solution that is 4mol/dm³ contains 4 moles in 1dm³. The volume that contains 2 moles is:
2 moles * (1dm³ / 4mol) =
0.5dm³b. And for the 6 mol/dm³ containing 0.03moles:
0.03 moles * (1dm³ / 6mol) =
5x10⁻³dm³when u get ur answer what type of reaction is it?
-double replacement
-combustion
-synthesis
-decomposition
-single replacement
Answer: combustion reaction
[tex]C_{25}H_{52}+38O_2\rightarrow 25CO_2+26H_2O[/tex]
Explanation:
According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side.
The balanced chemical equation is:
[tex]C_{25}H_{52}+38O_2\rightarrow 25CO_2+26H_2O[/tex]
The given reaction is a combustion reaction as in a combustion reaction , a susstaance is oxidized in the presence of oxygen to give carbon dioxide and water.
Write the formulas for the following ionic compounds.
potassium iodide
magnesium phosphide
silver sulphide
iron(III) bromide
magnesium hydroxide
sodium sulphate
lead (IV) nitrate
ammonium carbonate
Answer:
1) KI
2) Mg3P2
3) Ag2S
4) FeBr3
5) Mg(OH)2
6) Na2SO4
7) Pb(NO3)4
8) (NH4)2CO3
Describe the relationship between thermal energy and temperature of a substance.
help me pls :D
Where are most algae found?
on the surface of lakes
growing on the ocean bottoms
floating on water world-wide
in forests around the world
Answer:
on the surface of lakes
Explanation:
Why does air with higher amounts of water vapor have a lighter density?
Answer:
moist air is less dense than dry air because water has a lower molecular weight than nitrogen and oxygen
Answer:
Water vapor is a relatively light gas when compared to diatomic Oxygen and diatomic Nitrogen. Thus, when water vapor increases, the amount of Oxygen and Nitrogen decrease per unit volume and thus density decreases because mass is decreasing.
what dose the atomic number of an element represent
Answer:
No. of electrons of the element
Will mark branliest!! and 50 points for right answer!
1. which solvent resulted in the best separation of ink? oil or alcohol
2. which marker had a red spot or streak with an Rf value of approximately 0.82? Maker 1, 2, 3, or none?
3. which spot has the lowest rf value in the marker 3s chromatogram? yellow or purple?
4. which marker had a yellow spot with an rf value of approximately 0.60? Marker 1,2,3 or none?
Answer:
Alcohol, 0.63 I don't know the rest the rest
Explanation:
Answer:
Explanation:
1. Alcohol
2. Marker 1
3. Purple
4. Marker 2
Filling out the lab paper gives you the answers. These were all correct.
Question 10 (4 points)
A 3.4 L balloon is let go near the surface of the Earth where the pressure is about 1.15 atm. As the balloon floats up to the top of the
atmosphere where the pressure is only about 0.35 atm it expands. What is the volume of the balloon at the top of the atmosphere?
Really need help!! Don’t understand:( 40 points
If 100.0g of nitrogen gas (N2) is reacted with 100.0g of hydrogen gas (H2) what is the limiting and excess reactants?
Hint: convert grams to moles for each reactant and then convert to moles of NH3. You need your balanced equation from answer 1 to determine the mole relationship between each reactant and the product NH3. Use the periodic table to determine the molar mass of all chemical formulas. Fill in the “?” Blanks below to show your work.
Please please please fill in the blanks...
Molar mass of H2= ____ g/mol
100.0g H2 • 1 mol H2/? g H2 • ? Mol NH3/ ? Mol H2 = ? Mol NH3
Molar mass of N2= ? g/mol
100.0g N2 • 1 mol N2/ ? g N2 • ? Mol NH3/ ? Mole N2 = ? Mol NH3
Molar mass of NH3 = ? g/mol
100.0g N2 • 1 mol N2/ ? g N2 • ? Mol NH3/ ? Mol N2 • ? g NH3/ 1 mole NH3 = g NH3
Pretty please help me :( PWEAASEEEEEEE
I have an irregular object that I want to find the density of. I put it in a graduated cylinder and the water rises by 12 mL. I put the object on a scale and it measures 42 g. What is the density of the object?
Answer:
12
Explanation:
Consider the following representation of a reaction mechanism.
Step 1: A+A → C+E (slow)
Step 2: E + B → A+D (fast)
Overall reaction: A + B → C + D
What should appear in the rate law for the reaction above?
A) only A and B because they are reactants in the overall reaction
B) only C and C because they are products in the overall reaction
C) only A because it is the reactant in the rate-determining step
D) only E and B because they are the reactants in the rate-determining step
Answer:
The rate determining step is step 1
Explanation:
In the rate law for the given reaction,
only A appears because it is the reactant in the rate-determining step.So, option C is correct one.
Which step is rate determining steps?The slowest steps is rate determining step of the reaction.It is because in rate determining step the intermediate is formed.What is intermediate ?The short lived species formed in the mechanism of reaction is called intermediate.The intermediates is formed in slowest step because it is unstable species.What is rate law for the reaction?The rate law is also known as rate equationIt is the expression that provides relationship between rate and concentration of the reaction in a chemical reaction.The rate law is determined by the experimentally.If the reaction occurs in multi steps then the rate of the reaction is depends upon slowest step of the reaction.learn about rate law,
https://brainly.com/question/4222261
#SPJ2
10 points
What is the molar mass of argon?
Answer:
39.948 u
Explanation:
What is correct about solubility of
substances?
For each of the following solutions, state whether the solution is saturated, unsaturated or supersaturated in the following conditions:
A) at 30o C, 70 g of KNO3 is dissolved in 100 g of water ________________________________
B) at 20 oC 0 g of KClO3 is dissolved in 100 g water________________________________
C) at 100 oC , 30 g of NaNO3 is dissolved in 100 g of water_____________________________
D) 50 g of NH4Cl at 70o C is dissolved in 100 g water. ________________________________
Answer:
C.at 100•C.30 g of NaNO3 is dissolved in 100 g of water
True or False: if chemicals behave in a similar way they are grouped together on the periodic table
Answer:
Explanation: it is true
How many molecules are in 5.60 L of oxygen gas
Answer:
5.6L of O2 means we have 0.25 moles of O2. and as 1 molecule of O2 has 2 atoms, so, 1.50575*10^23 molecules will have 2*1.50575*10^23 atoms=3.0115*10^23 atoms of O.
Are humans more similar to trees or bacteria? How do you know?(1 point)
A
Humans are more similar to bacteria because trees cannot move around their environment.
B
Humans are more similar to trees because bacteria are too small to see.
C
Humans are not similar to trees or bacteria. Humans are a special species that is not related to any other species on Earth.
D
Humans are more similar to trees because all plants and animals are part of the same domain.
Answer:
Humans and trees are interdependent - we breathe in oxygen and breathe out carbon dioxide, while trees take in carbon dioxide and release oxygen.
Humans have about a thousand genes similar to those of bacteria, presumably because the genes are so vital that their DNA structure has remained much the same over millions of years of descent from a common ancestor.
Explanation:
Are humans more similar to trees or bacteria? How do you know?(1 point)
A
Humans are more similar to bacteria because trees cannot move around their environment.
B
Humans are more similar to trees because bacteria are too small to see.
C
Humans are not similar to trees or bacteria. Humans are a special species that is not related to any other species on Earth.
D
Humans are more similar to trees because all plants and animals are part of the same domain.
Answer:
a
Explanation:
Answer:
Option D
Explanation:
A and B both make sense to some level.
For option A,trees can only move while bacteria and humans can both move and locomote so there's that similarity
For option B,humans and plants are not micro organisms but bacteria are so there's that similarity
Option C is just not true
Option D is the right answer thus both humans and animals are eukaryotes
PLSSS HELP
How is a balanced chemical reaction, like N2 +
3H2 --> 2NH3, similar to a recipe?
Answer: With each input, there is an output, a recipe requires certain ingredients, and certain amounts of each. A recipe calls for measurements, missing something can ruin it, just like a chemical formula, take something out or add something else, you get something completely different. when putting things together to make something you have to make sure what your putting in, will give you the product you want as the output.
Explanation:
Calculate the reaction rate given the following:
After 2 minutes (120 seconds), the concentration of a product was measured to
increase from 0.0012 M to 1.48 M.
1.48 M/s
0.0123 M/s
0.0012 M/s
-0.0123 M/s
Answer:
0.0123 M/s
Explanation:
The reaction rate is the rate at which the reaction takes place and results in an increased concentration of the products. The rate of the reaction is 0.0123 M/s.
What is the reaction rate?
The reaction rate is the increase of the concentration of the product with respect to time in seconds. The rate of reaction is given by,
[tex]\rm rate = \rm \dfrac {\Delta C}{\Delta t}[/tex]
Given,
Change in product concentration = 1.478
Time period = 120 seconds
Substituting values in the above equation:
[tex]\begin{aligned} \rm rate &= \rm \dfrac {\Delta C}{\Delta t}\\\\& = \dfrac{1.478}{120}\\\\&= 0.0123 \end{aligned}[/tex]
Therefore, option B. 0.0123 M/s is the reaction rate.
Learn more about reaction rate here:
https://brainly.com/question/13440548
Write the complete electron configurations for
(i) copper
(ii) xenon
Answer:
hello to get it from you and your favouri love your pic
Fill in the blanks and name the process.
What is the process of ____ reproduction where a cell makes ___ of itself?
What makes up soil and where do these main components come
from? ASAP
Answer:
Soil is a mixture of minerals, dead and living organisms (organic materials), air, and water.
Explanation:
Dead organisms decompose(kind of like fertilizer)
water comes from nearby watersheds, precipitation processes, etc.
Answer:
Soil is made up of three main components – minerals that come from rocks below or nearby, organic matter which is the remains of plants and animals that use the soil, and the living organisms that reside in the soil. The proportion of each of these is important in determining the type of soil that is present.
4 Which pair of ions is isoelectronic?
A Ca2+ and 02-
B Na+ and 02-
OC Lit and Cl-
OD Mg2+ and CI-
Answer:
B. Na+ and O2-
Explanation:
Na+ plus has 10 electrons and O2- also has 10 electrons
Loren has the samples of elements that are listed below at room temperature. He exposes the samples to the same heat source until each sample reaches a temperature of 90.0°C. 10 g of Al(s) (C subscript p. = 0.897 J/(gi°C)) 10 g of Ag(s) (C subscript p.= 0.234 J/gi°C ) 10 g of Fe(s) (C subscript p. = 0.450 J/gi°C) 10 g of Zn(s) (C subscript p. = 0.387 J/gi°C ) From first to last, which lists the order in which these samples will reach 90.0°C? Al, Fe, Zn, Ag Ag, Zn, Fe, Al Al, Fe, Ag, Zn Ag, Al, Zn, Fe
The order in which the substances will reach 90.0°C is; Ag, Zn, Fe, Al.
What is specific heat capacity?The term specific heat capacity refers to the quantity of heat that is required to raise the temperature of an object by 1K. The higher the heat capacity, the greater the heat that is required for the object to reach 90.0°C.
The order in which the substances will reach 90.0°C is; Ag, Zn, Fe, Al. We can see that Ag has the lowest heat capacity and the first to reach 90° while All has the highest heat capacity and the last to reach 90°.
Learn more about heat capacity:https://brainly.com/question/13499849
#SPJ2
True or False: Different substances, like shortening and soap, will melt at the same temperature. True False
Answer:
false
Explanation:
different things will have different melting points
What is the molarity of a solution made from dissolving 3.0 moles of Saline (NaCl) in 0.25 L of solution?
Answer:
D
Explanation:
all ya got to do is divide the moles from the solution... so 3.0 divided by 0.25. put it in a calculator
hope this helps
The molarity of a solution made from dissolving 3.0 moles of Saline (NaCl) in 0.25 L of solution is 12M.
What is Molarity?Molarity of a given solution is known as the total number of moles of solute per litre of the solution. A solution that is 1.00 molar (written 1.00 M) contains 1.00 mole of solute for every liter of solution.
Molarity = (No. of moles of solute ÷ Volume of solution in liters)
The unit of molarity is mol L⁻¹.
Molarity is temperature dependent because as temperature changes, volume of the solution also changes.
Given,
3.0 moles of Saline (NaCl)
Volume of solution = 0.25L
Molarity = (No. of moles of solute ÷ Volume of solution in liters)
Molarity = 3 ÷ 0.25 = 12 M
Therefore, The molarity of a solution made from dissolving 3.0 moles of Saline (NaCl) in 0.25 L of solution is 12M.
Learn more about molarity, here:
brainly.com/question/8732513
#SPJ2
What do you already know about the structure of a water molecule?
Answer:
The key to understanding water's chemical behavior is its molecular structure. A water molecule consists of two hydrogen atoms bonded to an oxygen atom, and its overall structure is bent. This is because the oxygen atom, in addition to forming bonds with the hydrogen atoms, also carries two pairs of unshared electrons
Explanation:
Hope it helps
PLEASEEEE HELP URGENTTTT
Answer:
i don't see the question
Explanation:
How many moles of oxygen are required to use up 2 moles of propane?
Answer:
6.0 moles
Explanation:
The thing to remember about balanced chemical equations is that the stoichiometric coefficients added to each chemical species that takes part in the reaction are equivalent to moles.
I think its 10 moles, hope this helps.