The provided context diagram and diagram 0 accurately depict the student's work grading system, including the components and processes involved in grading, grade reporting, and final grades.
A context diagram and diagram 0 for the information system described in the given narrative are shown below: Context DiagramDiagram 0The following are the descriptions of the components present in the above diagrams:
Student submits work for grading and receives graded work.Instructors set parameters for automatic grading and receive grade reports.The "Student Record System" provides final grades to students and receives class rosters.The Student Record System establishes the gradebook, assign final grades, grade student work, and produce grade reports for the instructor.The given system consists of a single process, i.e., Student Record System. The input of the system is the class roster and grading parameters, which are processed in the system and produce grade reports for instructors and final grades for students. Therefore, the diagrams are accurately depicting the student's work grading system.
Learn more about context diagram: brainly.com/question/33345964
#SPJ11
Suraj is installing microsoft windows on his home computer. On which device will the installer copy the system files?.
The installer will copy the system files on the computer's hard drive.
Where are the system files copied during the installation of Microsoft Windows?During the installation of Microsoft Windows on a computer, the installer will copy the necessary system files onto the computer's hard drive. These system files are essential for the operating system to function properly. The hard drive serves as the primary storage location for the operating system, applications, and user data.
Once the system files are copied to the hard drive, the installation process continues with additional configurations and settings to complete the setup of the operating system. After the installation is finished, the computer will be able to boot into the newly installed Windows operating system.
Learn more installer
brainly.com/question/31440899
#SPJ11
Declare a boolean variable with the identifier endsWith_world and assign it the result of a method call on the movieName object reference that returns whether or not that String contains the character sequence (String) "Mad".
Declare a boolean variable with the identifier containsWordMad and assign it the result of a method call on the movieName object reference that returns whether or not that String ends with the String "world".
Declare a String variable with the identifier substring and assign it the result of a method call on the movieName object reference that returns the part of that string between index positions 7 and 10.
Declare a int variable with the identifier indexOfLastLowerCaseA and assign it the result of a method call on the movieName object reference that returns the index position (location) of the last occurrence of the letter a within that string.
Declare a int variable with the identifier indexOfFirstLowerCaseA and assign it the result of a method call on the movieName object reference that returns the index position (location) of the first occurrence of the letter a within that string.
In one line, declare a char variable with the identifier firstCharacter and assign it the result of a method call on the movieName object reference that returns the length of the String.
Declare a student variable with identifier test1 and assign it an object created by the default constructor of the Student Class.
Declare three int variables and assign each the value returned by calling the nextInt method on the Scanner object reference.
Declare a variable of type int and assign each the value returned by calling the nextInt method on the Scanner object reference.
Multiple variables are assigned values based on method calls on the `movieName` object reference and a `Scanner` object reference, including checking for specific substrings, extracting substrings, finding index positions, and obtaining input values.
Assign boolean, String, and integer variables based on method calls and user input.In the given code snippet, several variables are declared and assigned values based on method calls on the `movieName` object reference and a `Scanner` object reference.
The `endsWith_world` variable is assigned the result of a method call that checks if the `movieName` string ends with the sequence "world".
The `containsWordMad` variable is assigned the result of a method call that checks if the `movieName` string contains the sequence "Mad".
The `substring` variable is assigned the result of a method call that extracts a substring from the `movieName` string based on the specified index positions.
The `indexOfLastLowerCaseA` variable is assigned the index position of the last occurrence of the letter 'a' in the `movieName` string using a method call.
The `indexOfFirstLowerCaseA` variable is assigned the index position of the first occurrence of the letter 'a' in the `movieName` string.
The `firstCharacter` variable is assigned the length of the `movieName` string by calling a method that returns the length.
Lastly, a `Student` object is created using the default constructor, and four integer variables are assigned values returned by calling the `nextInt` method on the `Scanner` object reference.
Learn more about Multiple variables
brainly.com/question/32482862
#SPJ11
Given the following data requirements for a MAIL_ORDER system in which employees take orders of parts from customers, select the appropriate representation in an ER diagram for each piece of data requirements: - The mail order company has employees, each identified by a unique employee number, first and last name, and Zip Code. - Each customer of the company is identified by a unique customer number, first and last name, and Zip Code. - Each part sold by the company is identified by a unique part number, a part name, price, and quantity in stock - Each order placed by a customer is taken by an employee and is given a unique order number. Each order contains specified quantities of one or more parts. Each order has a date of receipt as well as an expected ship date. The actual ship date is also recorded. Company's Employees Customer Number Order placed by customer Order contains part Ship Date Order Number Employee taking order
The appropriate representation in an ER diagram for the given data requirements of a MAIL_ORDER system would include the following entities: Employee, Customer, Part, and Order.
What are the attributes associated with the Employee entity in the ER diagram?The Employee entity in the ER diagram will have the following attributes: employee number (unique identifier), first name, last name, and Zip Code. These attributes uniquely identify each employee in the system.
Learn more about ER diagram
brainly.com/question/28980668
#SPJ11
Write a C++ program that implements a "Guess-the-Number" game. First call the rand() function to get a
random number between 1 and 15 (I will post a pdf about rand() on Canvas). The program then enters a loop
that starts by printing "Guess a number between 1 and 15:". After printing this, it reads the user response.
(Use cin >> n to read the user response.) If the user enters a value less than the random number, the program
prints "Too low" and continues the loop. If the user enters a number larger than the random number, the
program prints "Too high" and continues the loop. If the user guesses the random number, the program
prints "You got!", and then prints: how many times the user guessed too high, how many times the user guessed too low, and the total number of guesses. You will have to keep track of how many times the user
guesses.
Run once (Make sure the number of guesses that is printed matches the number of guesses made)
Here is the C++ program that implements a "Guess-the-Number", If the user guesses the random number, we printed "You got it!" and printed the total number of guesses.
The number of times guessed too low, and the number of times guessed too high.The loop continues until the user guesses the correct number.Once the correct number is guessed.
The program exits and returns 0.
game:#include
#include
using namespace std;
int main() {
int n;
int lowGuesses = 0;
int highGuesses = 0;
int totalGuesses = 0;
srand(time(NULL));
int randomNum = rand() % 15 + 1;
do {
cout << "Guess a number between 1 and 15: ";
cin >> n;
totalGuesses++;
if (n < randomNum) {
cout << "Too low\n";
lowGuesses++;
} else if (n > randomNum) {
cout << "Too high\n";
highGuesses++;
} else {
cout << "You got it!\n";
cout << "Total number of guesses: " << totalGuesses << endl;
cout << "Number of times guessed too low: " << lowGuesses << endl;
cout << "Number of times guessed too high: " << highGuesses << endl;
}
} while (n != randomNum);
return 0;
}
To know more about C++ program visit :
https://brainly.com/question/7344518
#SPJ11
Using the table oe.product_information, Write PL/SQL block that uses the get the highest and lowest product list_prices and store them in 2 variables and then print out the 2 variables. (2) Note : you have to Declare v −
max_price and v −
min_price to be the same datatype as the list price column. 2- Take a copy of the oe.product_information table and name it products_copy and Use the copy and implicit cursor attributes, write a PL/SQL block that raise the list_price of products with 10% of their current list_price value. If the update statement executed successfully, print out the number of rows affected otherwise print out a message "No rows affected". (3) 3- Use the products_copy and write a PL/SQL block that display the product_id, product_name, list_price for all products in a a given product category, use explicit cursors with parameter
```plsql
-- Step 1
DECLARE
v_max_price oe.product_information.list_price%TYPE;
v_min_price oe.product_information.list_price%TYPE;
BEGIN
-- Step 2
SELECT MAX(list_price), MIN(list_price)
INTO v_max_price, v_min_price
FROM oe.product_information;
-- Step 3
DBMS_OUTPUT.PUT_LINE('Max Price: ' || v_max_price);
DBMS_OUTPUT.PUT_LINE('Min Price: ' || v_min_price);
END;
/
```
In the given PL/SQL block, we perform three steps to accomplish the given requirements.
We declare two variables, `v_max_price` and `v_min_price`, with the same data type as the `list_price` column in the `oe.product_information` table. These variables will store the highest and lowest product list prices, respectively.
We use a SELECT statement to retrieve the maximum (`MAX`) and minimum (`MIN`) values of the `list_price` column from the `oe.product_information` table. The retrieved values are then assigned to the variables `v_max_price` and `v_min_price` using the `INTO` clause.
We use the `DBMS_OUTPUT.PUT_LINE` procedure to print the values of `v_max_price` and `v_min_price`, which represent the highest and lowest product list prices, respectively.
Learn more about plsql
brainly.com/question/31261218
#SPJ11
Consider two strings "AGGTAB" and "GXTXAYB". Find the longest common subsequence in these two strings using a dynamic programming approach.
To find the longest common subsequence (LCS) between the strings "AGGTAB" and "GXTXAYB" using a dynamic programming approach, we can follow these steps:
Create a table to store the lengths of the LCS at each possible combination of indices in the two strings. Initialize the first row and the first column of the table to 0, as the LCS length between an empty string and any substring is 0.What is programming?Programming refers to the process of designing, creating, and implementing instructions (code) that a computer can execute to perform specific tasks or solve problems.
Continuation of the steps:
Iterate through the characters of the strings, starting from the first characterOnce the iteration is complete, the value in the bottom-right cell of the table (m, n) will represent the length of the LCS between the two strings.To retrieve the actual LCS, start from the bottom-right cell and backtrack through the tableThe LCS between the strings "AGGTAB" and "GXTXAYB" is "GTAB".
Learn more about programming on https://brainly.com/question/26134656
#SPJ4
A common error in C programming is to go ______ the bounds of the array
The answer to this fill in the blanks is; A common error in C programming is to go "out of" or "beyond" the bounds of the array.
In C programming, arrays are a sequential collection of elements stored in contiguous memory locations. Each element in an array is accessed using its index, starting from 0. Going beyond the bounds of an array means accessing or modifying elements outside the valid range of indices for that array. This can lead to undefined behavior, including memory corruption, segmentation faults, and unexpected program crashes.
For example, accessing an element at an index greater than or equal to the array size, or accessing negative indices, can result in accessing memory that does not belong to the array. Similarly, writing values to out-of-bounds indices can overwrite other variables or data structures in memory.
It is crucial to ensure proper bounds checking to avoid such errors and ensure the program operates within the allocated array size.
Going beyond the bounds of an array is a common error in C programming that can lead to various issues, including memory corruption and program crashes. It is essential to carefully manage array indices and perform bounds checking to prevent such errors and ensure the program's correctness and stability.
Learn more about C programming here:
brainly.com/question/30905580
#SPJ11
Given the values of three variables: day, month, and year, the program calculates the value NextRate, NextRate is the date of the day after the input date. The month, day, and year variables have integer values subject to these conditions: C1. 1≤day≤31 C2. 1≤ month ≤12 C3. 1822≤ year ≤2022 If any of these conditions fails, the program should produce an output indicating the corresponding variable has an out-of-range value. Because numerous invalid daymonth-year combinations exit, if there is an invalid date the program should produce the error message "Invalid Input Date". Notes: 1- A year is a leap year if it is divisible by 4 , unless it is a century year. For example, 1992 is a leap year. 2- Century years are leap years only if they are multiple of 400 . For example, 2000 is a leap year. Define the equivalence classes and boundary values and develop a set of test cases to cover them. To show the test coverage, fill a table with the following columns:
A set of test cases has been developed to cover the equivalence classes and boundary values for the given conditions. The table provided includes the boundary values, test cases, expected output, and the actual results of the program for each test case.
The equivalence classes and boundary values and develop a set of test cases to cover them for the given conditions are as follows:
Equivalence Class Boundary Values1
Valid day1≤day≤312 Valid month1≤month≤123 Valid year1822≤year≤20224 Invalid dayday < 1 or day > 315 Invalid monthmonth < 1 or month > 126 Invalid yearyear < 1822 or year > 20227 Invalid leap yearyear is divisible by 4 but not by 100 or 400We can develop a set of test cases to cover the above mentioned conditions and fill the table as follows:
Boundary Value Test Case
Expected Output Result day = 1 month = 1 year = 1822Next Rate = 2-1-1822
Valid Input day = 31 month = 12 year = 2022Next Rate = 1-1-2023
Valid Input day = 32 month = 1 year = 1822Invalid Input Date Invalid Input day = 1 month = 13 year = 1822Invalid Input Date Invalid Input day = 1 month = 1 year = 1821Invalid Input Date Invalid Input day = 1 month = 1 year = 2023Invalid Input Date Invalid Input day = 29 month = 2 year = 1900Invalid Input Date day = 29 month = 2 year = 2000Next Rate = 3-1-2000
Valid InputWe have filled the table with the following columns:
Boundary Value: It includes the possible values of the variables. Test Case: It includes the specific values we choose to test. Expected Output: It includes the output the program should produce for each test case. Result: It includes the output the program produced for each test case.Learn more about equivalence classes: brainly.com/question/33300699
#SPJ11
Two of the following statements are true, and one is false. Identify the false statement:
a. An action such as a key press or button click raises an event.
b. A method that performs a task in response to an event is an event handler.
c. The control that generates an event is an event receiver.
The false statement is c. The control that generates an event is not necessarily an event receiver.
In event-driven programming, events are used to trigger actions or behaviors in response to user interactions or system conditions. The three statements provided relate to the concepts of events and their handling. Let's analyze each statement to identify the false one.
a. An action such as a key press or button click raises an event.
This statement is true. In event-driven programming, actions like key presses or button clicks are often associated with events. When such actions occur, events are raised to signal that the action has taken place.
b. A method that performs a task in response to an event is an event handler.
This statement is also true. An event handler is a method or function that is designed to execute specific actions when a particular event occurs. It serves as the mechanism for responding to events and performing tasks accordingly.
c. The control that generates an event is an event receiver.
This statement is false. The control that generates an event is often referred to as the event source or event sender. It is the entity responsible for initiating the event. On the other hand, the event receiver is the component or object that is designed to handle or respond to the event.
Learn more about control
brainly.com/question/28346198
#SPJ11
Which encryption method requires an out-of-band key exchange? Public key Asymmetric Hash Secret key
The encryption method that requires an out-of-band key exchange is the Public key encryption method. What is public key encryption? Public key encryption is a system that utilizes a pair of keys for encryption and decryption.
The public key is utilized for encryption, while the private key is used for decryption. It is one of the most commonly used encryption systems in use today. What is out-of-band key exchange? Out-of-band (OOB) key exchange is a strategy for sharing symmetric encryption keys between two or more parties that are not directly connected. When used as a security measure, it can provide significant benefits over traditional key exchange methods.
In order to generate a secret key, out-of-band key exchange requires a pre-existing secure communications channel. A public key is utilized to encrypt the shared secret key. The key must be sent to the recipient through a different channel than the one used to send the public key.How does Public Key Encryption use Out of Band key exchange?Out-of-band key exchange is necessary for public key encryption because it is critical that the recipient of the public key be confident that the public key is authentic.
To know more about public key visit:
https://brainly.com/question/33636480
#SPJ11
There is no machine instruction in the MIPS ISA for mov (move from one register to another). Instead the assembler will use the instruction and the register.
The MIPS ISA does not have a machine instruction for the mov (move from one register to another). Instead, the assembler will utilize the addu (add unsigned) instruction and the register.In computer science, the MIPS (Microprocessor without Interlocked Pipelined Stages) is a reduced instruction set computer (RISC) instruction set architecture (ISA) that is popularly utilized in embedded systems such as routers and DSL modems, as well as in some home entertainment equipment.The MIPS architecture comprises three distinct generations that have been released since the first version was unveiled in 1985. The assembler's directive "move $t0, $t1" would typically be implemented using the addu (add unsigned) instruction, with $0 as the source register and $t1 as the destination register. In order to prevent any changes to the values of $0 or $t1, they are specified as operands of the addu instruction.Here, the register $t1, which contains the value that we want to move, is selected as the source operand, whereas the register $t0, which will receive the value, is specified as the destination operand. The assembler understands the "move" directive and knows that it should employ the addu instruction to achieve the same result.The addu instruction is utilized instead of the move instruction because it saves one opcode in the MIPS instruction set. Because MIPS is a RISC architecture, its instruction set was designed to be as straightforward as possible. So, the move instruction was deliberately omitted in order to reduce the number of instructions in the instruction set.
Include statements #include > #include using namespace std; // Main function int main() \{ cout ≪ "Here are some approximations of PI:" ≪ endl; // Archimedes 225BC cout ≪22/7="≪22/7≪ endl; I/ zu Chongzhi 480AD cout ≪355/113="≪355/113≪ end1; // Indiana law 1897AD cout ≪"16/5="≪16/5≪ endl; // c++ math library cout ≪ "M_PI ="≪ MPPI ≪ endl; return 0 ; \} Step 1: Copy and paste the C ++
program above into your C ++
editor and compile the program. Hopefully you will not get any error messages. Step 2: When you run the program, you should see several lines of messages with different approximations of PI. The good news is that your program has output. The bad news is that all of your approximation for PI are all equal to 3 , which is not what we expected or intended. Step 3: C++ performs two types of division. If you have x/y and both numbers x and y are integers, then C ++
will do integer division, and return an integer result. On the other hand if you have x/y and either number is floating point C ++
will do floating point division and give you a floating point result. Edit your program and change "22/7" into "22.0/7.0" and recompile and run your program. Now your program should output "3.14286". Step 4: Edit your program again and convert the other integer divisions into floating point divisions. Recompile and run your program to see what it outputs. Hopefully you will see that Zu Chongzhi was a little closer to the true value of PI than the Indiana law in 1897. Step 5: By default, the "cout" command prints floating point numbers with up to 5 digits of accuracy. This is much less than the accuracy of most computers. Fortunately, the C ++
"setprecision" command can be used to output more accurate results. Edit your program and add the line "#include in the include section at the top of the file, and add the line "cout ≪ setprecision(10);" as the first line of code in the main function. Recompile and run your program. Now you should see much better results. Step 6: As you know, C ++
floats are stored in 32-bits of memory, and C ++
doubles are stored in 64-bits of memory. Naturally, it is impossible to store an infinite length floating point value in a finite length variable. Edit your program and change "setprecision(10)" to "setprecision (40) " and recompile and run your program. If you look closely at the answers you will see that they are longer but some of the digits after the 16th digit are incorrect. For example, the true value of 22.0/7.0 is 3.142857142857142857… where the 142857 pattern repeats forever. Notice that your output is incorrect after the third "2". Similarly, 16.0/5.0 should be all zeros after the 3.2 but we have random looking digits after 14 zeros. Step 7: Since 64-bit doubles only give us 15 digits of accuracy, it is misleading to output values that are longer than 15 digits long. Edit your program one final time and change "setprecision(40)" to "setprecision(15)". When you recompile and run your program you should see that the printed values of 22.0/7.0 and 16.0/5.0 are correct and the constant M_PI is printed accurately. Step 8: Once you think your program is working correctly, upload your final program into the auto grader by following the the instructions below.
The provided C++ program approximates PI and is improved by using floating-point division and increasing precision.
The provided C++ program demonstrates the approximation of the mathematical constant PI using different methods. However, due to the nature of integer division in C++, the initial results were inaccurate. Here are the steps to correct and improve the program:
Step 1: Copy the given C++ program into your editor and compile it. Ensure that no error messages appear during compilation.
Step 2: When running the program, you will notice that all the approximations for PI are equal to 3, which is incorrect. This is because integer division is used, which truncates the fractional part.
Step 3: To resolve this, modify the program by changing "22/7" to "22.0/7.0" to perform floating-point division. Recompile and run the program. Now, the output for "22.0/7.0" should be "3.14286".
Step 4: Further improve the program by converting all the integer divisions to floating-point divisions. Recompile and run the program again. You should observe that the approximation by Zu Chongzhi (355/113) is closer to the true value of PI than the Indiana law approximation (16/5).
Step 5: By default, the "cout" command prints floating-point numbers with up to 5 digits of accuracy. To increase the precision, include the header file <iomanip> at the top of the program and add the line "cout << setprecision(10);" as the first line inside the main function. Recompile and run the program to observe more accurate results.
Step 6: Note that floating-point values have limitations due to the finite memory allocated for storage. To demonstrate this, change "setprecision(10)" to "setprecision(40)". Recompile and run the program again. Although the results have more digits, some of the digits after the 16th digit may be incorrect due to the limitations of 64-bit doubles.
Step 7: Adjust the precision to a more realistic level by changing "setprecision(40)" to "setprecision(15)". Recompile and run the program to observe that the printed values for "22.0/7.0" and "16.0/5.0" are correct, along with the constant M_PI.
Step 8: Once you are satisfied with the program's correctness, upload the final version to the auto grader as per the given instructions.
In summary, by incorporating floating-point division, increasing precision, and being aware of the limitations of floating-point representations, we can obtain more accurate approximations of the mathematical constant PI in C++.
Learn more about Approximating PI.
brainly.com/question/31233430
#SPJ11
In MATLAB using SimuLink do the following
1. The block of a counter subsystem, which consists of two variants: ascending and descending.
The block must be able to start counting at a value determined by an input.
The step (eg 1 in 1, 2 in 2, etc.) of the count is determined by another input.
The counter runs indefinitely until the simulation time runs out
The counting algorithm must be done in code in a MATLAB-function block, blocks that perform preset functions are not allowed.
Hint: They most likely require the "Unit Delay (1/z)" block.
A counter subsystem can be created in MATLAB using Simu Link. The subsystem has two options: ascending and descending.
The following conditions must be met by the block:1. The block must be able to start counting at a value determined by an input.2. of the count is determined by another input.3. The counter runs indefinitely until the simulation time runs out.4. The counting algorithm must be done in code in a MATLAB-function block. Blocks that perform preset functions are not allowed.5.
They most likely require the "Unit Delay (1/z)" block. The Unit Delay (1/z) block is used to perform this action. It holds the input signal value for a specified period of time and then produces it as an output signal after that time has passed. This is accomplished using a variable delay or a discrete-time delay block. The following is the main answer with a detailed explanation of the procedure .
To know more about simu link visit:
https://brainly.com/question/33636383
#SPJ11
Learning debugging is important if you like to be a programmer. To verify a program is doing what it should, a programmer should know the expected (correct) values of certain variables at specific places of the program. Therefore make sure you know how to perform the instructions by hand to obtain these values. Remember, you should master the technique(s) of debugging. Create a new project Assignment02 in NetBeans and copy the following program into a new Java class. The author of the program intends to find the sum of the numbers 4,7 and 10 . (i) Run the program. What is the output? (ii) What is the expected value of sum just before the for loop is executed? (iii) Write down the three expected intermediate sums after the integers 4,7 and 10 are added one by one (in the given order) to an initial value of zero. (iv) Since we have only a few executable statements here, the debugging is not difficult. Insert a System. out. println() statement just after the statement indicated by the comment " // (2)" to print out sum. What are the values of sum printed (press Ctrl-C to stop the program if necessary)? (v) What modification(s) is/are needed to make the program correct? NetBeans allows you to view values of variables at specific points (called break points). This saves you the efforts of inserting/removing println() statements. Again, you must know the expected (correct) values of those variables at the break points. If you like, you can try to explore the use break points yourself
Debugging involves identifying and fixing program errors by understanding expected values, using print statements or breakpoints, and making necessary modifications.
What is the output of the given program? What is the expected value of the sum before the for loop? What are the expected intermediate sums after adding 4, 7, and 10? What values of sum are printed after inserting a println() statement? What modifications are needed to correct the program?The given program is intended to calculate the sum of the numbers 4, 7, and 10. However, when running the program, the output shows that the sum is 0, which is incorrect.
To debug the program, the expected values of the sum at different points need to be determined. Before the for loop is executed, the expected value of the sum should be 0.
After adding the numbers 4, 7, and 10 one by one to the initial value of 0, the expected intermediate sums are 4, 11, and 21, respectively.
To verify these values, a System.out.println() statement can be inserted after the relevant code line to print the value of the sum.
By observing the printed values, any discrepancies can be identified and modifications can be made to correct the program, such as ensuring that the sum is initialized to 0 before the for loop starts.
Using debugging techniques and tools like breakpoints in an integrated development environment like NetBeans can facilitate the process of identifying and fixing program errors.
Learn more about Debugging involves
brainly.com/question/9433559
#SPJ11
output the larger (maximum) of the two variables (values) by calling the Math.max method
To output the larger (maximum) of the two variables (values) by calling the Math.max method. The method of Math.max() returns the maximum of two numbers.
The given two numbers are passed as arguments. The syntax of the Math.max() method is as follows: Math.max(num1, num2);where, num1 and num2 are the numbers to be compared. For example, if we have two variables `a` and `b` then we can get the larger number by calling the Math.max() method.The explanation is as follows:Let's say we have two variables `x` and `y` whose values are given and we want to output the larger value among them.
So, we can use Math.max() method as shown below:var x = 5;var y 8;console.log("The larger value is " + Math.max(x,y));Here, the value of x is 5 and the value of y is 8. When we call the Math.max() method by passing x and y as arguments then it returns the maximum value between them which is 8. Hence, the output will be:The larger value is 8
To know more about variables visit:
https://brainly.com/question/32607602
#SPJ11
Consider the following lines of code which create several LinkedNode objects:
String o0 = "Red";
String o1 = "Green";
String o2 = "Blue";
String o3 = "Yellow";
LinkedNode sln0 = new LinkedNode(o0);
LinkedNode sln1 = new LinkedNode(o1);
LinkedNode sln2 = new LinkedNode(o2);
LinkedNode sln3 = new LinkedNode(o3);
Draw the linked list that would be produced by the following snippets of code:
a. sln1.next = sln3;
sln2.next = sln0;
sln3.next = sln2;
b. sln0.next = sln3;
sln2.next = sln3;
sln3.next = sln1;
For the given snippets of code, let's visualize the resulting linked list -
sln1.next = sln3;
sln2.next = sln0;
sln3.next = sln2;
How is this so?The resulting linked list would look like -
sln1 -> sln3 -> sln2 -> sln0
The next pointer of sln1 points to sln3, the next pointer of sln3 points to sln2, and the next pointer of sln2 points to sln0.
This forms a chain in the linked list.
Learn more about code at:
https://brainly.com/question/26134656
#SPJ4
after removing the printed paper from your laser printer, the toner smudges and can be wiped off in places.which of the following printer components is most likely causing the problem?
The most likely printer component causing the problem is the fuser assembly.
The fuser assembly is responsible for melting the toner particles and fusing them onto the paper during the printing process. If the toner smudges and can be wiped off after removing the printed paper, it suggests that the toner particles are not being properly fused onto the paper.
One possible reason for this issue is that the fuser assembly may not be reaching the required temperature to melt the toner particles completely. This could be due to a faulty heating element or a malfunctioning thermostat in the fuser assembly. As a result, the toner particles remain loose and easily smudge when touched.
Another potential cause could be a worn-out fuser roller or a damaged fuser belt. These components are responsible for applying pressure and heat to the paper, ensuring proper fusion of the toner. If they are worn or damaged, they may not be providing adequate pressure or heat, leading to incomplete toner fusion and smudging.
In conclusion, if the toner smudges and can be wiped off after removing the printed paper, it is most likely due to an issue with the fuser assembly. Problems with the temperature, heating element, thermostat, fuser roller, or fuser belt can all contribute to incomplete toner fusion and smudging.
Learn more about Fuser assembly
brainly.com/question/33709399
#SPJ11
1. Where can a calculated column be used?
A. Excel calculation.
B. PivotTable Field List.
C. PivotTable Calculated Item.
D. PivotTable Calculated Field.
2. What happens when you use an aggregation function (i.e., SUM) in a calculated column?
A, It calculates a value based on the values in the row.
B.You receive an error.
C. It calculates a value based upon the entire column.
D. It turns the calculated column into a measure.
3. What is one of the Rules of a Measure?
A. Redefine the measure, don't reuse it.
B. Never use a measure within another measure.
C. Only use calculated columns in a measure.
D. Reuse the measure, don't redefine it.
4. What type of measure is created within the Power Pivot data model?
A. Implicit.
B. Exact.
C. Explicit.
D. Calculated Field.
5. What is the advantage of creating a SUM measure in the Data Model versus placing the field in the Values quadrant of the PivotTable?
A. The SUM measure is "portable" and can be used in other measure calculations.
B. It is more accurate than the calculation in the PivotTable.
C. Once you connect a PivotTable to a data model, you can no longer add fields to the Values quadrant.
D. It is the only way to add fields to the Values quadrant of a Power PivotTable.
1. A calculated column can be used in Excel calculation.The correct answer is option A.2. When you use an aggregation function (i.e., SUM) in a calculated column, it calculates a value based upon the entire column.The correct answer is option AC3. One of the rules of a measure is that you should redefine the measure and not reuse it.The correct answer is option A.4. The type of measure that is created within the Power Pivot data model is Explicit.The correct answer is option C.5. The advantage of creating a SUM measure in the Data Model versus placing the field in the Values quadrant of the PivotTable is that the SUM measure is "portable" and can be used in other measure calculations.The correct answer is option A.
1. Calculated columns can be used in Excel calculations, such as in formulas or other calculations within the workbook. They can be created in the Power Pivot window by defining a formula based on the values in other columns.
2. When an aggregation function like SUM is used in a calculated column, it calculates a value based on the values in the row. For example, if you have a calculated column that uses the SUM function, it will sum the values in other columns for each row individually.
3. One of the rules of a measure is to reuse the measure, don't redefine it. This means that instead of creating multiple measures with the same calculation, you should reuse an existing measure wherever possible. This helps maintain consistency and avoids redundancy in the data model.
4. Within the Power Pivot data model, the type of measure that is created is an explicit measure. Explicit measures are created using DAX (Data Analysis Expressions) formulas in Power Pivot.
These measures define calculations based on the data in the model and can be used in PivotTables or other analyses.
5. The advantage of creating a SUM measure in the Data Model instead of placing the field directly in the Values quadrant of the PivotTable is that the SUM measure becomes "portable."
It means that the measure can be used in other measure calculations within the data model. This allows for more flexibility and the ability to create complex calculations by combining measures together.
Placing the field directly in the Values quadrant of the PivotTable limits its usage to that specific PivotTable and doesn't offer the same level of reusability.
For more such questions Excel,Click on
https://brainly.com/question/30300099
#SPJ8
1.1 Which OSI model layer provides the user interface in the form of an entry point for programs to access the network infrastructure? a. Application layer b. Transport layer c. Network layer d. Physical layer 1.2 Which OSI model layer is responsible for code and character-set conversions and recognizing data formats? a. Application layer b. Presentation layer c. Session layer d. Network layer 1.3 Which layers of the OSI model do bridges, hubs, and routers primarily operate respectively? (1) a. Physical layer, Physical layer, Data Link layer b. Data Link layer, Data Link layer, Network layer c. Data Link layer, Physical layer, Network layer d. Physical layer, Data Link layer, Network layer 1.4 Which OSI model layer is responsible for converting data into signals appropriate for the transmission medium? a. Application layer b. Network layer c. Data Link layer d. Physical layer 1.5 At which layer of the OSI model do segmentation of a data stream happens? a. Physical layer b. Data Link layer c. Network layer d. Transport layer 1.6 Which one is the correct order when data is encapsulated? a. Data, frame, packet, segment, bits b. Segment, data, packet, frame, bits c. Data, segment, packet, frame, bits d. Data, segment, frame, packet, bits
The Application layer provides the user interface in the form of an entry point for programs to access the network infrastructure.
The Application layer provides the user interface in the form of an entry point for programs to access the network infrastructure. It helps to recognize the user’s communication requirements, such as how they want to retrieve data and what formats they require. This layer also provides authentication and authorization services, which allow users to access data or use network resources.
The Presentation layer is responsible for code and character-set conversions and recognizing data formats. The main answer is b. Presentation layer. :The Presentation layer is responsible for code and character-set conversions and recognizing data formats. It is the third layer of the OSI model and is responsible for taking data and formatting it in a way that can be used by applications.
To know more about network visit:
https://brainly.com/question/33632011
#SPJ11
Exploratory Data Analysis (EDA) in Python Assignment Instructions: Answer the following questions and provide screenshots, code. 1. Create a DataFrame using the data set below: \{'Name': ['Reed', 'Jim', 'Mike','Mark'], 'SATscore': [1300, 1200, 1150, 1800]\} Get the total number of rows and columns from the data set using .shape. 2. You have created an instance of Pandas DataFrame in #1 above. Now, check the types of data with the help of info() function. 3. You have created an instance of Pandas DataFrame in #1 above. Calculate the mean SAT score using the mean() function of the NumPy library.
To complete the assignment, import pandas and numpy libraries, define a dataset as a dictionary, and pass it to the pandas DataFrame() function.
What is the next step to takeThen, use the.shape attribute to obtain the number of rows and columns. Check the data types using the.info() function of pandas DataFrame.
Finally, calculate the mean SAT score using the numpy library and the.mean() function on the 'SATscore' column. Run these code snippets one after another to obtain desired outputs and include appropriate screenshots in your assignment submission.
Read more about data analysis here:
https://brainly.com/question/30156827
#SPJ4
**Please use Python version 3.6**
Create a function called countLowerCase() that does the following:
- Accept a string as a parameter
- Iterate over the string and counts the number of lower case letters that are in the string
- Returns the number of lower case letters
Example: string = "hELLo WorLd." would return 5
- Restrictions: Please do not use the following string functions: upper(), lower(), isupper(), or islower() OR any import statements
The countLowerCase() function that accepts a string as a parameter iterates over the string and counts the number of lower case letters that are in the string.
It then returns the number of lower case letters.A function called countLowerCase() that does the following can be created:Accepts a string as a parameterIterates over the string and counts the number of lower case letters that are in the stringReturns the number of lower case lettersBelow is the implementation of the countLowerCase() function:
= 1return count```The function is called countLowerCase(). The function has one parameter, which is a string that is to be counted. Within the function, count is initialized to 0. The for loop then iterates through the string one character at a time. When a character is found within the range of lowercase letters (a-z), count is incremented by 1. After all characters are counted, count is returned.
To know more about function visit:
https://brainly.com/question/32400472
#SPJ11
Write a Python script that converts from Celsius to Fahrenheit, printing a table showing conversions for integer values between a minimum and a maximum both specified by the user. For example, if the user enters minimum -40 and maximum 100, the output will show each integer Celsius value from -40 to 100 with the corresponding Fahrenheit value. Most of the Fahrenheit values will not be integers; do not worry about the varying precision in the output Use a separate function for the input (call it twice, once to get the minimum and once to get the maximum). Note that the function input() for user input is used in the future value calculator in the lecture notes. Also use a separate function for the conversion. The conversion formula is f = c * 9.0/5.0 + 32
(Not using Python 3)
Here is the python program that converts from Celsius to Fahrenheit, printing a table showing conversions for integer values between a minimum and a maximum both specified by the user. For example, if the user enters minimum -40 and maximum 100, the output will show each integer Celsius value from -40 to 100 with the corresponding Fahrenheit value.The program makes use of two functions to get the minimum and maximum from the user, and to convert Celsius to Fahrenheit. The function 'input' is used to get user input. The conversion formula is f = c * 9.0/5.0 + 32.
The program should work in both Python 2 and Python 3.```pythondef get_temperature(prompt): """Get a temperature in Celsius from the user""" while True: try: temperature = float(raw_input(prompt)) return temperature except ValueError: print("Invalid temperature; please try again.")def celsius_to_fahrenheit(celsius): """Convert a temperature in Celsius to Fahrenheit""" return celsius * 9.0 / 5.0 + 32def print_table(minimum, maximum): """Print a table of Celsius to Fahrenheit conversions""" print("{:>10} {:>10}".format("Celsius", "Fahrenheit")) for celsius in range(minimum, maximum + 1):
fahrenheit = celsius_to_fahrenheit(celsius) print("{:>10} {:>10.1f}".format(celsius, fahrenheit))# Get the minimum and maximum temperaturesminimum = int(get_temperature("Enter the minimum temperature: "))maximum = int(get_temperature("Enter the maximum temperature: "))# Print the table of conversionsprint_table(minimum, maximum))```
To know more about Celsius visit:
brainly.com/question/33564059
#SPJ11
Experts recommend that firms trying to implement an enterprise system be wary of modifying the system software to conform to their business practices allowing too much time to transition to the new business processes appointing an independent resource to provide project oversight defining metrics to assess project progress and identify risks
Main Answer:
Firms implementing an enterprise system should be cautious about modifying the system software to align with their business practices, appointing an independent resource for project oversight, and defining metrics to assess project progress and identify risks.
Explanation:
Implementing an enterprise system can be a complex and challenging process for any organization. To ensure a successful implementation, it is important for firms to consider a few key factors. Firstly, modifying the system software extensively to fit their business practices should be approached with caution. While customization may seem appealing, it can lead to compatibility issues, increased costs, and difficulties in system maintenance and upgrades. It is advisable for firms to align their business practices with the system's capabilities, rather than the other way around, to minimize complications.
Secondly, appointing an independent resource to provide project oversight is crucial. This individual or team can offer unbiased guidance, monitor progress, identify potential roadblocks, and ensure that the implementation stays on track. Their objective perspective can help mitigate risks and facilitate smoother transitions.
Lastly, defining metrics to assess project progress and identify risks is essential for effective project management. By establishing clear and measurable goals, firms can evaluate the success of the implementation and identify any potential issues or deviations from the planned timeline. This allows for timely intervention and corrective measures, ensuring that the project stays on course.
Learn more about project management methodologies and best practices to successfully implement enterprise systems. #SPJ11
Experts recommend caution in modifying system software, allowing sufficient transition time, appointing independent oversight, and defining metrics for project assessment.
When implementing an enterprise system, experts recommend several cautionary measures to ensure a smooth transition and successful integration into business practices. These measures include being wary of excessive modifications to the system software, allowing sufficient time for the transition to new business processes, appointing an independent resource for project oversight, and defining metrics to assess project progress and identify potential risks.
Firstly, it is important for firms to exercise caution when modifying the system software to align with their specific business practices. While customization may seem tempting to address unique requirements, excessive modifications can result in increased complexity, higher costs, and potential compatibility issues with future system updates. It is advisable to prioritize configuration over customization, leveraging the system's built-in flexibility to accommodate business needs.
Secondly, organizations should allocate enough time for the transition to the new business processes enabled by the enterprise system. Rushing the implementation can lead to inadequate training, resistance from employees, and compromised data integrity. A well-planned timeline with realistic milestones and sufficient user training and support is crucial for a successful transition.
Appointing an independent resource to provide project oversight is another important recommendation. This individual or team can objectively evaluate the project's progress, monitor adherence to timelines and budgets, and mitigate any conflicts of interest. Their role is to ensure the project stays on track and aligns with the organization's strategic objectives.
Lastly, defining metrics to assess project progress and identify risks is vital for effective project management. These metrics can include key performance indicators (KPIs) related to timelines, budget utilization, user adoption rates, and system performance. Regular monitoring of these metrics allows the project team to proactively address any deviations or risks, enabling timely corrective actions and ensuring project success.
In summary, firms implementing an enterprise system should exercise caution when modifying system software, allocate sufficient time for the transition, appoint an independent resource for oversight, and define metrics to assess project progress and identify risks. By following these expert recommendations, organizations can enhance the likelihood of a successful implementation and maximize the benefits derived from their enterprise system.
learn more about Enterprise systems.
brainly.com/question/32634490
#SPJ11
Find solutions for your homework
engineering
computer science
computer science questions and answers
we have a set of reviews and their corresponding classes. using naïve bayes algorithm, compute the probability for all words given each class label for the above dataset. assume all the reviews are in lower case. 5 pts estimate the probability for the sentence, "i hated the terrible acting" for positive and negative classes to make a prediction about the
Question: We Have A Set Of Reviews And Their Corresponding Classes. Using Naïve Bayes Algorithm, Compute The Probability For All Words Given Each Class Label For The Above Dataset. Assume All The Reviews Are In Lower Case. 5 Pts Estimate The Probability For The Sentence, "I Hated The Terrible Acting" For Positive And Negative Classes To Make A Prediction About The

Show transcribed image text
Expert Answer
1st step
All steps
Final answer
Step 1/3
Using naïve Bayes Algorithm, we distribute the word in either positive words or negative zone. Based on the probability score, it gets compared to all words in that zone.
View the full answer

Step 2/3
Step 3/3
Final answer
Transcribed image text: We have a set of reviews and their corresponding classes. Using Naïve Bayes algorithm, compute the probability for all words given each class label for the above dataset. Assume all the reviews are in lower case. 5 pts Estimate the probability for the sentence, "I hated the terrible acting" for positive and negative classes to make a prediction about the given review; use smoothing if needed. 5 pts
Naive Bayes is an algorithm that uses probabilities and Bayes' theorem to classify data based on certain characteristics.
It's known as a 'naive' algorithm because it assumes that the probability of an attribute or feature is unrelated to the probability of any other attribute or feature.
This is the formula for calculating the likelihood probability in Naive Bayes:
P(Feature|Class) = (Number of times the feature occurs in class /Total number of features in class)
To calculate the likelihood of the given sentence "I hated the terrible acting" for positive and negative classes, we first need to calculate the probabilities of all the words given the positive and negative class labels. We then multiply the probabilities of all the words in the sentence together to obtain the overall likelihood of the sentence for each class label.
We can calculate the probability of each word given the class label using the Naive Bayes formula given above. For example, to calculate the probability of the word "hated" given the positive class label, we count the number of times "hated" appears in all the positive reviews, and divide it by the total number of words in all the positive reviews. We do the same thing for the negative class label. We repeat this process for all the words in the dataset and obtain the probabilities of all the words given to each class label.
Once we have calculated the probabilities of all the words given each class label, we can calculate the likelihood of the sentence "I hated the terrible acting" for the positive and negative class labels. To do this, we multiply the probabilities of all the words in the sentence given the positive class label together and do the same thing for the negative class label. We then compare the two likelihoods and predict that the sentence belongs to the class label with the higher likelihood. If the likelihoods are the same, we can randomly assign the sentence to one of the classes.
We can estimate the probability for the sentence "I hated the terrible acting" for positive and negative classes using Naive Bayes algorithm by calculating the probabilities of all the words given each class label and then multiplying the probabilities of all the words in the sentence together to obtain the overall likelihood of the sentence for each class label. We can then compare the two likelihoods and predict that the sentence belongs to the class label with the higher likelihood.
To know more about algorithm visit
brainly.com/question/33344655
#SPJ11
The waterfall model is the traditional model for software development. Using a diagram, show the FIVE (5) main stages of the model and how they are related.
The waterfall model follows a sequential approach to software development, with distinct stages of requirements gathering, design, architecture, implementation, and testing. It emphasizes thorough planning and documentation but lacks flexibility for iterative changes.
The waterfall model is the traditional model for software development. It is also referred to as a linear-sequential life cycle model. This model suggests that the stages of software development should be performed in a linear manner, with each stage beginning only when the previous stage is completed.
Here are the five main stages of the waterfall model and how they are related:
Requirements Gathering: This is the first stage of the waterfall model, in which the requirements for the software are gathered from the client. The gathered requirements are analyzed and the feasibility of the project is evaluated. The result of this stage is a document that specifies all the requirements for the software system. Design: The design stage is where the software architecture is defined. This is where the developers create the blueprint for the software system based on the gathered requirements. In this stage, developers must keep the software requirements in mind while designing the software. Architecture:This stage involves creating a high-level software architecture based on the requirements and design of the software system. It is where the system's structure is defined and all of the components are identified.Implementation:The implementation stage is where the actual software code is written based on the design and architecture. This stage involves translating the design documents into actual code, which is then compiled and tested.Testing:This is the final stage of the waterfall model, in which the software is tested to ensure that it meets the specified requirements. The software is tested by using various methods like unit testing, system testing, and acceptance testing. Once all testing is completed and all defects are fixed, the software is ready to be delivered to the client.Learn more about The waterfall model: brainly.com/question/14079212
#SPJ11
please edit this code in c++ so that it works, this code does not need an int main() function since it already has one that is part of a larger code:
// modify the implementation of myFunction2
// must divide x by y and return the result
float myFunction2(int x, int y ) {
x = 15;
y = 3;
int div = x / y ;
cout << div << endl;
return div;
}
In order to edit this code in C++ so that it works, you must modify the implementation of myFunction2 to divide x by y and return the result. The code given below performs this task.// modify the implementation of myFunction2
// must divide x by y and return the result
float myFunction2(int x, int y) {
float div = (float)x / y;
return div;
}The modified code does not require an int main() function since it is already part of a larger code. The changes are as follows: Instead of the line int div = x / y ;, we must write float div = (float)x / y ; because we need to return a floating-point result.
Learn more about main() function from the given link
https://brainly.com/question/22844219
#SPJ11
Purpose. We are building our own shell to understand how bash works and to understand the Linux process and file API. Instructions. In this assignment we will add only one feature: redirection. To direct a command's output to a file, the syntax "> outfile" is used. To read a command's input from a file, the syntax "< infile" is used. Your extended version of msh should extend the previous version of msh to handle commands like these: $./msh msh >1 s−1> temp.txt msh > sort < temp.txt > temp-sorted.txt The result of these commands should be that the sorted output of "Is -l" is in file temp-sorted.txt. Your shell builtins (like 'cd' and 'help') do not have to handle redirection. Only one new Linux command is needed: dup2. You will use dup2 for both input and output redirection. The basic idea is that if you see redirection on the command line, you open the file or files, and then use dup2. dup2 is a little tricky. Please check out this dup2 slide deck that explains dup2 and gives hints on how to do the homework. Starter code. On mlc104, the directory /home/CLASSES/Bruns1832/cst334/hw/hw5/msh4 contains the file msh4.c that you can use as your starting point. Note that this code is a solution to the previous msh assignment. Testing your code. On mlc104, the directory /home/CLASSES/Bruns1832/cst334/hw/hw5/msh4 contains test files test*.sh and a Makefile. Copy these to the directory where you will develop your file msh.c. Each test should give exit status 0 , like this: $./ test1.sh $ echo \$? You need to run test1.sh first, as it will compile your code and produce binary file 'msh' that is used by the other tests. To use the Makefile, enter the command 'make' to run the tests. If you enter the command 'make clean', temporary files created by testing will be deleted.
The purpose of building our own shell is to understand how bash works and to gain knowledge about the Linux process and file API.
The extended version of msh (shell) should include the functionality to handle redirection. Redirection allows us to direct a command's output to a file using the syntax "> outfile" and to read a command's input from a file using the syntax "< infile".
For example, to store the sorted output of the command "ls -l" in a file named "temp-sorted.txt", we can use the command "ls -l > temp-sorted.txt".
It is important to note that your shell built-ins, such as 'cd' and 'help', do not need to handle redirection. Only external commands should support redirection.
To implement redirection, you will need to use the Linux command 'dup2'. 'dup2' is used for both input and output redirection.
The basic idea is that when you encounter redirection in the command line, you open the specified file(s) and then use 'dup2' to redirect the input/output accordingly.
However, please note that 'dup2' can be a bit tricky to use correctly.
You can start with the file 'msh4.c', located in the directory /home/CLASSES/Bruns1832/cst334/hw/hw5/msh4,
which can serve as your starting point for implementing the extended version of msh.
For testing your code, you can find test files named test*.sh and a Makefile in the directory /home/CLASSES/Bruns1832/cst334/hw/hw5/msh4.
Each test should produce an exit status of 0.
For example, to run the first test, you would enter the command:
$ ./test1.sh
To check the exit status of a test, you can use the command 'echo $?'.
To run all the tests conveniently, you can use the provided Makefile by entering the command 'make'. If you want to remove any temporary files created during testing, you can use the command 'make clean'.
Learn more about Linux from the given link:
https://brainly.com/question/12853667
#SPJ11
Square a Number This is a practice programming challenge. Use this screen to explore the programming interface and try the simple challenge below. Nothing you do on this page will be recorded. When you are ready to proceed to your first scored challenge, cllck "Finish Practicing" above. Programming challenge description: Write a program that squares an Integer and prints the result. Test 1 Test Input [it 5 Expected Output [o] 25
Squaring a number is the process of multiplying the number by itself. In order to solve this problem, we will use a simple formula to find the square of a number: square = number * numberThe code is given below. In this program, we first take an input from the user, then we square it and then we print it on the console.
The given problem statement asks us to find the square of a number. We can find the square of a number by multiplying the number by itself. So we can use this simple formula to find the square of a number: square = number * number.To solve this problem, we will first take an input from the user and store it in a variable named number. Then we will use the above formula to find the square of the number. Finally, we will print the result on the console.
System.out.println(square); }}This code takes an integer as input from the user and stores it in a variable named number. It then finds the square of the number using the formula square = number * number. Finally, it prints the result on the console using the System.out.println() method. The code is working perfectly fine and has been tested with the given test case.
To know more about program visit:
https://brainly.com/question/30891487
#SPJ11
In Basic Ocaml Please using recursions #1 Checking a number is square Write an OCaml function names is_square satisfying the type int → bool . For an input n, your function should check if there is a value 1 between e and n such that 1∗1∗n. It is recommended that you define a recursive helper function within your is_seuare function which will recursively count from e to n and perform the check described above. - Is_square a should return true - is_square a should return true - Is_square 15 should return false You may assume that all test inputs are positive integers or 0. #2 Squaring all numbers in a list Next, write a recursive function square_all with type int 1ist → int 1ist. This function should take a list of integens and return the list where all integers in the input list are squared. - square_all [1;−2;3;4] should return [1;4;9;16] - square_all [1; 3; 5; 7; 9] should return [1; 9; 25; 49; 81] - square_al1 [e; 10; 20; 30; 40] should return [e; 100; 400; 900; 160e] Note that the values in the input list can be negative. #3 Extracting all square numbers in a list Write a recursive function al1_squares of type int 11st → 1nt 11st, which takes a list of integers and returns a list of all those integers in the list which are square. Use the function is_square which you wrote to perform the check that a number is square. - all_squares [1;2;3;4] should return [1;4] - all_squares [0;3;9;25] should return [e;9;25] - a11_squares [10; 20; 30; 4e] should return [] Here you can assume that all values in the list on non-negative and can thus be passed to is_sqare. \#4 Product of squaring all numbers in a list Finally, write a recursive function product_of_squares satisfying type int 11st → fint, which will calculate the product of the squares of all numbers in a list of integers. - product_of_squares [1;2;3;4] should return 576 - product_of_squares [0;3;9;25] should return e - product_of_squares [5; 10; 15; 2e] should return 225eeeeee
In OCaml, the provided functions perform various operations on integers. They include checking if a number is square, squaring all numbers in a list, extracting square numbers from a list, and calculating the product of squared numbers in a list.
Here are the OCaml functions implemented according to the given requirements:
(* #1 Checking a number is square *)
let rec is_square n =
let rec helper i =
if i * i = n then true
else if i * i > n then false
else helper (i + 1)
in
if n < 0 then false
else helper 0
(* #2 Squaring all numbers in a list *)
let rec square_all lst =
match lst with
| [] -> []
| x :: xs -> (x * x) :: square_all xs
(* #3 Extracting all square numbers in a list *)
let rec all_squares lst =
match lst with
| [] -> []
| x :: xs ->
if is_square x then x :: all_squares xs
else all_squares xs
(* #4 Product of squaring all numbers in a list *)
let rec product_of_squares lst =
match lst with
| [] -> 1
| x :: xs -> (x * x) * product_of_squares xs
These functions can be used to check if a number is square, square all numbers in a list, extract square numbers from a list, and calculate the product of the squares of numbers in a list, respectively.
Learn more about OCaml: brainly.com/question/33562841
#SPJ11
C Programming
Run the race program 10 times, and briefly answer the following:
What conditions would need to happen in order to get the expected output of 50? Which part of the code should I change in order to get 50 as the output of every run? Explanation needed
#include
#include
#include
#include
pthread_t tid1, tid2;
/* Function prototypes */
void *pthread1(void *), *arg1;
void *pthread2(void *), *arg2;
/* This is the global variable shared by both threads, initialised to 50.
* Both threads will try to update its value simultaneously.
*/
int theValue = 50;
/* The main function */
int main()
{
int err;
/* initialise the random number generator to sleep for random time */
srand (getpid());
/* try to start pthread 1 by calling pthread_create() */
err = pthread_create(&tid1, NULL, pthread1, arg1);
if(err) {
printf ("\nError in creating the thread 1: ERROR code %d \n", err);
return 1;
}
/* try to start pthread 2 by calling pthread_create() */
err = pthread_create(&tid2, NULL, pthread2, arg2);
if (err) {
printf ("\nError in creating the thread 2: ERROR code %d \n", err);
return 1;
}
/* wait for both threads to complete */
pthread_join(tid1, NULL);
pthread_join(tid2, NULL);
/* display the final value of variable theValue */
printf ("\nThe final value of theValue is %d \n\n", theValue);
}
/* The first thread - it increments the global variable theValue */
void *pthread1(void *param)
{
int x;
printf("\nthread 1 has started\n");
/*** The critical section of thread 1 */
sleep(rand() & 1); /* encourage race condition */
x = theValue;
sleep(rand() & 1); /* encourage race condition */
x += 2; /* increment the value of theValue by 2 */
sleep(rand() & 1); /* encourage race condition */
theValue = x;
/*** The end of the critical section of thread 1 */
printf("\nthread 1 now terminating\n");
}
/* The second thread - it decrements the global variable theValue */
void *pthread2(void *param)
{
int y;
printf("\nthread 2 has started\n");
/*** The critical section of thread 2 */
sleep(rand() & 1); /* encourage race condition */
y = theValue;
sleep(rand() & 1); /* encourage race condition */
y -= 2; /* decrement the value of theValue by 2 */
sleep(rand() & 1); /* encourage race condition */
theValue = y;
/*** The end of the critical section of thread 2 */
printf("\nthread 2 now terminating\n");
}
In order to get the expected output of 50 every time, the race condition between the two threads needs to be eliminated. This can be done using mutex locks. Here's the modified code that will give an expected output of 50 every time. #include
#include
#include
pthread_t tid1, tid2;
void *pthread1(void *), *arg1;
void *pthread2(void *), *arg2;
int theValue = 50;
pthread_mutex_t lock;
int main()
{
int err;
srand (getpid());
pthread_mutex_init(&lock, NULL);
err = pthread_create(&tid1, NULL, pthread1, arg1);
if(err) {
printf ("\nError in creating the thread 1: ERROR code %d \n", err);
return 1;
}
err = pthread_create(&tid2, NULL, pthread2, arg2);
if (err) {
printf ("\nError in creating the thread 2: ERROR code %d \n", err);
return 1;
}
pthread_join(tid1, NULL);
pthread_join(tid2, NULL);
printf ("\nThe final value of theValue is %d \n\n", theValue);
pthread_mutex_destroy(&lock);
}
void *pthread1(void *param)
{
int x;
printf("\nthread 1 has started\n");
sleep(rand() & 1);
pthread_mutex_lock(&lock);
x = theValue;
sleep(rand() & 1);
x += 2;
sleep(rand() & 1);
theValue = x;
pthread_mutex_unlock(&lock);
printf("\nthread 1 now terminating\n");
}
void *pthread2(void *param)
{
int y;
printf("\nthread 2 has started\n");
sleep(rand() & 1);
pthread_mutex_lock(&lock);
y = theValue;
sleep(rand() & 1);
y -= 2;
sleep(rand() & 1);
theValue = y;
pthread_mutex_unlock(&lock);
printf("\nthread 2 now terminating\n");
}
Therefore, the lock functions have been introduced in order to prevent the threads from accessing the same resource at the same time.
To know more about expected visit:
brainly.com/question/27851826
#SPJ11