The mass of solute contained in 250.0 mL of a 3.92 M solution of AlF3 is X g.
To determine the mass of the solute (AlF3) in the given solution, we need to use the molarity (M) and volume of the solution.
1. Start by converting the given volume from milliliters (mL) to liters (L). Since 1 L is equal to 1000 mL, the volume of the solution is 250.0 mL / 1000 mL/L = 0.250 L.
2. The molarity of the solution is given as 3.92 M, which means there are 3.92 moles of AlF3 present in 1 liter of the solution.
3. Now, we can calculate the number of moles of AlF3 in the given volume of the solution by multiplying the molarity by the volume in liters:
Moles of AlF3 = Molarity × Volume = 3.92 M × 0.250 L.
4. Finally, calculate the mass of the solute (AlF3) by multiplying the number of moles by the molar mass of AlF3, which is 83.98 g/mol.
Mass of AlF3 = Moles of AlF3 × Molar mass of AlF3.
Performing the calculations above will give you the mass of the solute (AlF3) contained in 250.0 mL of the 3.92 M solution, expressed in grams.
To know more about mass click here:
https://brainly.com/question/26789700
#SPJ11
Determine the molality of a solution made by dissolving 14.6g of
LIF in 324g of H2O
The molality of the solution is approximately 1.733 mol/kg. This means that for every kilogram of water, there are approximately 1.733 moles of LiF dissolved in the solution.
To determine the molality of a solution, we need to calculate the amount of solute (in moles) and the mass of the solvent (in kilograms). We are given the mass of solute, 14.6 g of LiF, and the mass of the solvent, 324 g of H2O. Now we can proceed to calculate the molality.
Molality is a measure of the concentration of a solution, defined as the number of moles of solute per kilogram of solvent. To calculate the molality, we first need to convert the mass of solute into moles. The molar mass of LiF (lithium fluoride) is the sum of the atomic masses of lithium (Li) and fluorine (F), which is approximately 25.94 g/mol.
Number of moles of LiF = Mass of LiF / Molar mass of LiF
= 14.6 g / 25.94 g/mol
≈ 0.562 mol
Next, we need to convert the mass of the solvent into kilograms.
Mass of H2O = 324 g
= 324 g / 1000
= 0.324 kg
Now, we can calculate the molality using the formula:
Molality = Moles of solute / Mass of solvent (in kg)
= 0.562 mol / 0.324 kg
≈ 1.733 mol/kg
Therefore, the molality of the solution is approximately 1.733 mol/kg. This means that for every kilogram of water, there are approximately 1.733 moles of LiF dissolved in the solution. Molality is a useful concentration unit, especially in colligative property calculations, as it remains constant with temperature changes and does not depend on the size of the solution.
To learn more about molality click here:
brainly.com/question/30909953
#SPJ11
For one molecule of glucose (a hexose sugar) to be produced, how many turns of the Calvin cycle must take place? Assume each turn begins with one molecule of carbon dioxide
In the Calvin cycle, each turn requires three molecules of carbon dioxide to produce one molecule of glucose. Therefore, to produce one molecule of glucose, the Calvin cycle must take place six times.
The Calvin cycle is the series of biochemical reactions that occur in the chloroplasts of plants during photosynthesis. Its main function is to convert carbon dioxide and other compounds into glucose, which serves as an energy source for the plant. The cycle consists of several steps, including carbon fixation, reduction, and regeneration of the starting molecule.
During each turn of the Calvin cycle, one molecule of carbon dioxide is fixed by the enzyme ribulose-1,5-bisphosphate carboxylase/oxygenase (RuBisCO). The carbon dioxide is then converted into a three-carbon compound called 3-phosphoglycerate. Through a series of enzymatic reactions, the 3-phosphoglycerate is further transformed, ultimately leading to the production of one molecule of glucose.
Since each turn of the Calvin cycle incorporates one molecule of carbon dioxide into glucose, and glucose is a hexose sugar consisting of six carbon atoms, it follows that six turns of the cycle are required to produce one molecule of glucose.
Learn more about molecules here:
https://brainly.com/question/32298217
#SPJ11
A water has a pH of 8.0 and the concentration of HCO3 is 1.5 x 10-3 M. What is the approximate alkalinity of the water in units of mg/L as CaCO3?
The approximate alkalinity of the water in units of mg/L as CaCO3 using the equation.
To determine the approximate alkalinity of the water in units of mg/L as CaCO3, we need to calculate the concentration of bicarbonate ions (HCO3-) and convert it to units of CaCO3.
The molar mass of CaCO3 is 100.09 g/mol, and we can use this information to convert the concentration of HCO3- to mg/L as CaCO3.
First, let's calculate the alkalinity:
Alkalinity = [HCO3-] * (61.016 mg/L as CaCO3)/(1 mg/L as HCO3-)
Given:
pH = 8.0
[HCO3-] = 1.5 x 10^(-3) M
Since the pH is 8.0, we can assume that the water is in equilibrium with the bicarbonate-carbonate buffer system. In this system, the concentration of carbonate ions (CO3^2-) can be calculated using the following equation:
[CO3^2-] = [HCO3-] / (10^(pK2-pH) + 1)
The pK2 value for the bicarbonate-carbonate buffer system is approximately 10.33.
Let's calculate the concentration of CO3^2-:
[CO3^2-] = [HCO3-] / (10^(10.33 - 8.0) + 1)
= [HCO3-] / (10^2.33 + 1)
= [HCO3-] / 234.7
Substituting the given value:
[CO3^2-] = (1.5 x 10^(-3) M) / 234.7
Now, we can calculate the alkalinity:
Alkalinity = [HCO3-] + 2 * [CO3^2-]
= (1.5 x 10^(-3) M) + 2 * (1.5 x 10^(-3) M) / 234.7
= (1.5 x 10^(-3) M) + (3 x 10^(-3) M) / 234.7
To convert alkalinity to mg/L as CaCO3, we use the conversion factor:
1 M = 1000 g/L
1 g = 1000 mg
Alkalinity (mg/L as CaCO3) = Alkalinity (M) * (1000 g/L) * (1000 mg/g) * (100.09 g/mol)
= Alkalinity (M) * 100,090 mg/mol
Substituting the calculated value:
Alkalinity (mg/L as CaCO3) = [(1.5 x 10^(-3) M) + (3 x 10^(-3) M) / 234.7] * 100,090 mg/mol
Now, you can calculate the approximate alkalinity of the water in units of mg/L as CaCO3 using the above equation.
To learn more about equation visit;
https://brainly.com/question/29657983
#SPJ11
In a combustor, gaseous propane (C3H8) enters stadily at 25∘C and 100kPa. It is reacted with 200% theoretical air at 25∘C and 100kPa. Assume complete combustion (of C to CO2 and H to H2O). Products leave at 100kPa and 25∘C, and H2O is in vapor phase. The magnitude of heat transfer (in kJ/kmol of fuel) is
1,040,000
2,040,000
3,040,000
4,040,000
5,040,000
B). 27.195 kJ/s ÷ 0.01225 kmol/s = 2,219.08 kJ/kmol of fuel (rounded to three significant figures).The magnitude of heat transfer in kJ/kmol of fuel can be calculated by the formula given below:
Qdot=ΔH*mdot_fuelIn this formula,
Qdot is the heat transfer rate in kJ/s, ΔH is the heat of combustion of fuel in kJ/mol, and mdot_fuel is the fuel mass flow rate in kmol/s. Since the problem gives the fuel molar flow rate instead of mass flow rate, the molar flow rate can be multiplied by the molar mass of propane to obtain the mass flow rate. Propane has a molar mass of 44.1 g/mol.The heat of combustion of propane is -2220 kJ/mol.
The negative sign indicates that the reaction is exothermic, and that amount of energy is released per mole of propane burned.
Mdot_fuel = 1 kmol/hr = 1/3600 kmol/s
mdot_fuel = mdot_fuel × M = 1/3600 × 44.1
= 0.01225 kg/s (where M is the molar mass of fuel)The heat transfer rate is:
Qdot = ΔH × mdot_fuel
= (-2220 kJ/mol) × 0.01225 kg/s
= -27.195 kJ/s
The heat transfer rate is negative,
which means that heat is leaving the combustor. Therefore, the magnitude of heat transfer is:
|-27.195 kJ/s| = 27.195 kJ/s
To know more about heat transfer visit:-
https://brainly.com/question/13433948
#SPJ11
The turnover number is denoted by the term kcat. What is the
significance of determining this value?
Determining the turnover number, denoted by the term kcat, is significant because it provides important information about the catalytic efficiency of an enzyme.
The turnover number, kcat, represents the maximum number of substrate molecules converted into product per unit time by a single active site of an enzyme when it is saturated with substrate. It is a measure of the enzyme's ability to perform catalysis and reflects the efficiency of the enzyme in converting substrate to product.
By determining the kcat value, researchers can compare and evaluate the catalytic efficiencies of different enzymes or variants of the same enzyme. It allows for the assessment of the enzyme's ability to catalyze the reaction of interest and can be used to understand the enzyme's role in biological processes or to optimize enzyme performance in various applications such as biotechnology and drug development.
To learn more about catalytic efficiency: -brainly.com/question/2928110
#SPJ11
Write the equations of complete combustion of the following
fuels with air. Calculate the stoichiometric air/fuel ratios.
a)C3H18
b)NH3
a) C3H18 (Propane): The stoichiometric air/fuel ratio is 5.
b) NH3 (Ammonia): The stoichiometric air/fuel ratio is 4.
a) C3H18 (Propane):
The balanced equation for the complete combustion of propane (C3H8) with air can be determined by considering the balanced combustion equation for each element.
Balance carbon (C) and hydrogen (H) atoms:
C3H8 + O2 → CO2 + H2O
Balance oxygen (O) atoms:
C3H8 + 5O2 → 3CO2 + 4H2O
The stoichiometric air/fuel ratio can be calculated by comparing the coefficients in the balanced equation. The coefficient of O2 in front of the propane (C3H8) indicates the number of moles of O2 required for complete combustion.
Stoichiometric air/fuel ratio = Moles of O2 / Moles of fuel
In this case, the stoichiometric air/fuel ratio is:
Stoichiometric air/fuel ratio = 5
b) Complete combustion of NH3 (Ammonia):
The balanced equation for the complete combustion of ammonia (NH3) with air can be determined using the balanced combustion equation for each element.
Balance nitrogen (N) and hydrogen (H) atoms:
NH3 + O2 → N2 + H2O
The stoichiometric air/fuel ratio can be calculated by comparing the coefficients in the balanced equation. The coefficient of O2 in front of ammonia (NH3) indicates the number of moles of O2 required for complete combustion.
Stoichiometric air/fuel ratio = Moles of O2 / Moles of fuel
In this case, the stoichiometric air/fuel ratio is:
Stoichiometric air/fuel ratio = 4
Therefore:
a) The balanced equation for the complete combustion of propane (C3H8) with air is:
C3H8 + 5O2 → 3CO2 + 4H2O
The stoichiometric air/fuel ratio is 5.
b) The balanced equation for the complete combustion of ammonia (NH3) with air is:
NH3 + 5/4 O2 → N2 + 3/2 H2O
The stoichiometric air/fuel ratio is 4.
learn more about complete combustion from this link:
https://brainly.com/question/29455281
#SPJ11
Question 1 Which of the following is a substitution reaction? OH 1-1 ·--X · I-L (-) ABUD A. I B. C. D. IV D OA B === OC Br SH 1 pts · X-l IV
From the given options: Option A is the substitution reaction among the given options.
Substitution reactions involve the replacement of an atom or a group of atoms in a molecule with another atom or group of atoms. In these reactions, one chemical species is substituted for another. Among the given options, Option A (OH → X) represents a substitution reaction.
In this reaction, the hydroxyl group (OH) is being substituted with another atom or group represented by X. This substitution can occur through various mechanisms such as nucleophilic substitution or electrophilic substitution, depending on the nature of the reacting species. Therefore, Option A corresponds to a substitution reaction, while the other options represent different types of reactions such as addition, elimination, or radical reactions.
Learn more about nucleophilic here:
https://brainly.com/question/31425447
#SPJ11
The correct answer for the substitution reaction is option C.In this case, the reaction involves the substitution of a leaving group (X) by a nucleophile (Nu). The correct answer, option C, indicates a nucleophilic substitution reaction.
In a substitution reaction, one functional group is replaced by another functional group.
In nucleophilic substitution, the nucleophile attacks the electrophilic center, which is typically a carbon atom bonded to the leaving group. The leaving group is displaced, and the nucleophile takes its place, resulting in the formation of a new compound.
Option A (I) represents an elimination reaction where a molecule loses a small molecule, usually a leaving group, and forms a double bond. Option B (Br) represents a halogenation reaction, which involves the addition of a halogen to a compound rather than substitution. Option D (SH) represents a nucleophilic addition reaction where a nucleophile adds to an electrophilic center without displacing a leaving group.
Therefore, option C is the correct choice as it corresponds to a substitution reaction involving the displacement of a leaving group by a nucleophile.
Learn more about substitution reaction here:
https://brainly.com/question/6170291
#SPJ11
Define the terms Total ion chromatogram and Selected ion
chromatogram. How may a Selected ion chromatogram be useful when
trying to calculate low levels of a specific pesticide in a river
water sample
A total ion chromatogram (TIC) is a type of chromatogram that shows the intensity of all ions present in a sample. A selected ion chromatogram (SIC) is a type of chromatogram that shows the intensity of only a specific set of ions.
In mass spectrometry, a chromatogram is a graph that shows the intensity of ions as a function of time. The time axis represents the retention time, which is the time it takes for an ion to travel through the mass spectrometer. The intensity axis represents the number of ions detected at a particular retention time. A TIC shows the intensity of all ions present in a sample. This can be useful for identifying the different components of a sample, but it can also be difficult to interpret because it can be difficult to distinguish between different ions that have similar masses. A SIC shows the intensity of only a specific set of ions. This can be useful for identifying a specific compound in a sample. For example, if you are trying to determine the concentration of a pesticide in a river water sample, you could use a SIC to monitor the intensity of the ions that are characteristic of that pesticide.
SICs can be more sensitive than TICs because they only detect the ions that you are interested in. This can be important for detecting low levels of a pesticide in a river water sample.
Here are some additional details about TICs and SICs:
TICs are typically used to provide a general overview of the components of a sample. They can be used to identify different compounds and to estimate their relative concentrations.
SICs are typically used to identify specific compounds in a sample. They can be used to determine the concentration of a specific compound with greater accuracy than a TIC.
To know more about selected ion chromatogram, click here:-
https://brainly.com/question/31827270
#SPJ11
ideal gas law
QUESTION 2 One mole of an ideal gas occupies 22.4 L at standard temperature and pressure. What would be the volume of one mole of an ideal gas at 359 °C and 1536 mmHg. (R-0,082 L-atm/K mol) QUESTION
The Ideal Gas Law (IGL) is a law that explains the behaviour of ideal gases. An ideal gas is one that is composed of point particles, which means that it has no volume and does not attract or repel each other. This law is described by the formula PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant, and T is temperature.
This equation can be manipulated to solve for any of the variables in the equation.The given question states that one mole of an ideal gas occupies 22.4 L at standard temperature and pressure. We can assume that standard temperature is 0°C and standard pressure is 1 atm. Therefore, we can rewrite the IGL equation as:
PV = nRTn = 1 molR = 0.082 L-atm/K molT = 273 K (since standard temperature is 0°C)V = 22.4 LP = 1 atmUsing these values, we can solve for R to get:R = PV/nTR = (1 atm x 22.4 L)/(1 mol x 273 K)R = 0.082 L-atm/K molNow we can use the same equation to solve for the volume of one mole of an ideal gas at 359°C and 1536 mmHg. The temperature must be converted to kelvin, so:
T = 359°C + 273K = 632 KP = 1536 mmHg (converting to atm by dividing by 760 mmHg/atm)P = 2.02 atmUsing these values and the ideal gas law equation, we can solve for V:PV = nRTn = 1 molR = 0.082 L-atm/K molT = 632 KV = (nRT)/PV = (1 mol x 0.082 L-atm/K mol x 632 K)/(2.02 atm)V = 20.1 LTherefore, the volume of one mole of an ideal gas at 359°C and 1536 mmHg would be 20.1 L.
To know more about explains visit:
https://brainly.com/question/31614572
#SPJ11
how many grams of agno3 are needed to make 250. ml of a solution that is 0.145 m?how many grams of agno3 are needed to make 250. ml of a solution that is 0.145 m?6.16 g0.0985 g98.5 g0.162 g
Therefore, approximately 6.16 grams of AgNO₃ are needed to make 250 mL of a solution with a concentration of 0.145 M.
To calculate the grams of AgNO₃ needed to make a 250 mL solution with a concentration of 0.145 M, we can use the formula:
Molarity (M) = moles of solute / volume of solution (L)
First, we need to convert the volume of the solution from milliliters to liters:
Volume = 250 mL = 250 mL / 1000 mL/L = 0.250 L
Next, we rearrange the formula to solve for moles of solute:
moles of solute = Molarity × volume of solution
moles of solute = 0.145 M × 0.250 L = 0.03625 mol
Finally, we can calculate the grams of AgNO₃ using its molar mass:
grams of AgNO₃ = moles of solute × molar mass of AgNO₃
grams of AgNO₃ = 0.03625 mol × (107.87 g/mol + 14.01 g/mol + 3(16.00 g/mol))
grams of AgNO₃ ≈ 0.03625 mol × 169.87 g/mol ≈ 6.16 g
Learn more about concentration here
https://brainly.com/question/30862855
#SPJ11
The correct IUPAC name for the following molecule is: cis-3,4,5-trimethylhept-2-ene cis-5-ethyl-3,4-dimethylhex-2-ene trans-3,4,5-trimethylhept-2-ene (E)-3,4,5-trimethylhept-2-ene (Z)-3,4,5-trimethylh
The correct IUPAC name for the given molecule is (E)-3,4,5 trimethylhept-2-ene.
To determine the correct IUPAC name for the molecule, we need to analyze the structural information provided.
The prefix "cis" refers to a geometric isomerism, indicating that the substituents on the double bond are on the same side of the molecule. However, the given molecule does not exhibit this arrangement.
The prefix "trans" also refers to geometric isomerism, indicating that the substituents on the double bond are on opposite sides of the molecule. However, the given molecule does not have this arrangement either.
The prefixes "cis" and "trans" are typically used when there are only two substituents on the double bond, but the given molecule has three substituents.
The correct notation for a geometric isomerism with three substituents on the double bond is (E) and (Z). The (E) notation indicates that the highest priority substituents are on opposite sides of the double bond, while the (Z) notation indicates that the highest priority substituents are on the same side of the double bond.
Therefore, the correct IUPAC name for the given molecule is (E)-3,4,5-trimethylhept-2-ene, indicating that the highest priority substituents are on opposite sides of the double bond.
Learn more about molecule here:
https://brainly.com/question/30465503
#SPJ11
2. Prolactin (pictured below) is a peptide hormone produced by your body. It is most commonly associated with milk production in mammals, but serves over 300 functions in the human body. a. FIRST, on the diagram of prolactin, make sure to label any partial or full charges that would be present. b. SECOND, in the space provided below, explain whether you think prolactin would be dissolved in water or not; make sure to clearly explain why or why not. c. Lastly, on the diagram of prolactin below, indicate where on the prolactin molecule water could interact via hydrogen bonds and if water soluble, demonstrate the hydration shell.
Prolactin is a peptide hormone that plays a crucial role in various physiological functions in the human body, including milk production. On the diagram of prolactin, the partial or full charges present in the molecule should be labeled.
Prolactin is likely to be dissolved in water. Peptide hormones, such as prolactin, are composed of amino acids that contain functional groups, including amine (-NH2) and carboxyl (-COOH) groups. These functional groups can form hydrogen bonds with water molecules, allowing the hormone to dissolve in water. Additionally, prolactin is a polar molecule due to the presence of various charged and polar amino acids in its structure. Polar molecules are soluble in water because they can interact with the polar water molecules through hydrogen bonding.
C. On the diagram of prolactin, the areas where water molecules could interact via hydrogen bonds can be identified. These include regions with polar or charged amino acid residues. If prolactin is water-soluble, a hydration shell can be demonstrated around the molecule, indicating the formation of hydrogen bonds between water molecules and the polar regions of prolactin. The specific locations of these interactions and the hydration shell can be indicated on the diagram.
To know more about Prolactin click here:
https://brainly.com/question/28546990
#SPJ11
Prompt 1: In narrative form (tell me a story), trace the path of a single atom of Nitrogen, in the form of Nitrogen gas (N2), from the atmosphere, into the biosphere, through the biosphere, and back into the atmosphere in the form of Nitrogen gas (N2). In your hypothetical description, be sure to include: A. A description of each pool it passes through as a source or a sink. B. How nitrogen moves from one reservoir to another (mechanisms of flux). C. What is involved in the process of nitrogen fixation? D. At least two instances where the nitrogen atom is influenced by human activity. E. Which organisms are involved in it's journey.
Narrative form or storytelling is used to convey events, experiences, or information. In a narrative form, a single atom of Nitrogen, in the form of Nitrogen gas (N2) travels through different pools. The description of each pool it passes through as a source or a sink is given below:
In the atmosphere:Nitrogen gas is the most abundant gas in the atmosphere, it comprises about 78% of the earth's atmosphere. It is a component of many organic and inorganic compounds in the atmosphere.In the biosphere:Nitrogen-fixing bacteria or lightning can convert nitrogen gas into ammonia. This ammonia can be converted into nitrite and then nitrate through nitrification. This nitrate can be taken up by plants and utilized to make proteins and other molecules that are important for life.
Animals that consume these plants get the nitrogen that they need to build their own proteins. When an organism dies, decomposers like bacteria break down the proteins and return the nitrogen back to the soil in the form of ammonia and other organic compounds.In the atmosphere:Denitrification is the process that converts nitrate to nitrogen gas, which is then released into the atmosphere. This can be done by anaerobic bacteria and other microbes that live in soils and other places where there is little or no oxygen. Human activities that influence the movement of Nitrogen:Humans have a significant impact on the movement of nitrogen in the environment. One of the ways in which they do this is through the use of fertilizers, which contain high levels of nitrogen. These fertilizers can be washed into rivers and streams, where they can cause eutrophication.
To know more about storytelling visit:-
https://brainly.com/question/30126514
#SPJ11
Question 101 Homework Unanswered Fill in the Blanks Type your answers in all of the blanks and submit X₁ X Ω· H₂106 + Cr-10 + Cr³+ For the previous redox reaction, enter the correct coefficient
The correct coefficient for the previous redox reaction X₁ X Ω· H₂106 + Cr-10 + Cr³+ is 6.
In the given redox reaction, the coefficient in front of Cr³+ is 6. This means that 6 moles of Cr³+ ions are involved in the reaction. The coefficient indicates the relative amount of each species involved in the reaction. In this case, the reaction involves the transfer of electrons between species, with Cr³+ being reduced to Cr²+.
By assigning a coefficient of 6 to Cr³+, it ensures that the number of electrons transferred and balanced on both sides of the reaction equation.
The coefficient of 6 indicates that for every 6 moles of Cr³+ ions participating in the reaction, there must be a corresponding number of moles for the other species involved.
It is important to balance the coefficients in a redox reaction to ensure that the reaction obeys the law of conservation of mass and charge.
The balanced coefficients help in determining the stoichiometry of the reaction, providing a clear understanding of the relative amounts of reactants and products involved.
Learn more about redox reaction here: https://brainly.com/question/28300253
#SPJ11
which compound would you expect to have the lowest boiling point? which compound would you expect to have the lowest boiling point?
CS2 is expected to have a lower boiling point compared to compounds with stronger intermolecular forces, such as those involving hydrogen bonding or polar interactions.
To determine which compound would have the lowest boiling point, we need to consider their molecular structures and intermolecular forces.
Generally, compounds with weaker intermolecular forces have lower boiling points. The strength of intermolecular forces depends on factors such as molecular size, polarity, and hydrogen bonding.
Among the choices provided, the compound that is expected to have the lowest boiling point is:
CS2 (Carbon disulfide)
Carbon disulfide (CS2) is a nonpolar molecule with a linear structure. It experiences weak London dispersion forces between its molecules. London dispersion forces are the weakest intermolecular forces. As a result, CS2 is expected to have a lower boiling point compared to compounds with stronger intermolecular forces, such as those involving hydrogen bonding or polar interactions.
Learn more about intermolecular forces here
https://brainly.com/question/29388558
#SPJ11
Helium-3, an electron, a neutron, and a proton have masses of
3.016029 amu, 5.486 x 104 amu, 1.00866 amu, and 1.00728
amu respectively. The mass defect for the formation of helium-3 is
_____ g/mol.
The mass defect for the formation of helium-3 is 1.364 x [tex]10^-28[/tex] g/mol.
The mass defect in nuclear reactions refers to the difference between the mass of the reactants and the mass of the products. In the case of the formation of helium-3, it involves the fusion of two protons and one neutron.
To calculate the mass defect, we need to determine the total mass of the reactants (protons and neutron) and compare it to the mass of the helium-3 product.
The total mass of the reactants is (2 * 1.00728 amu) + 1.00866 amu = 3.02222 amu.
The mass of the helium-3 product is 3.016029 amu.
Therefore, the mass defect is 3.02222 amu - 3.016029 amu = 0.006191 amu.
To convert the mass defect to grams per mole (g/mol), we multiply it by the molar mass constant (1 amu = 1.66054 x [tex]10^-24[/tex] g/mol).
Mass defect in grams/mol = 0.006191 amu * (1.66054 x [tex]10^-24[/tex] g/mol) = 1.025 x 10^-26 g/mol.
Thus, the mass defect for the formation of helium-3 is 1.364 x [tex]10^-28[/tex] g/mol.
Learn more about mass defect here:
https://brainly.com/question/4163502
#SPJ11
a. The pressure inside a metal container is 395mmHg at 141.5 ∘
C. If the container was heated to 707 ∘
C, what will be the final pressure of the container? b. A sample of ammonia gas was heated from 273 K to 846 K. If the final pressure is 685 psi, what was the initial pressure of the container? c. A gas cylinder's pressure has decreased by 50% when placed in the cooler? If the initial pressure and temperature are 82.5 atm and 25 ∘
C, what is the final temperature?
Based on the data provided, (a) the final pressure of the container will be 696 mmHg, (b) the initial pressure of the container was 424 psi, (c) the final temperature of the gas cylinder is 10 ∘C.
(a)The final pressure of the container will be 696 mmHg.
To solve this, we can use the following equation : P1*T2 = P2*T1
where:
P1 is the initial pressure (395 mmHg)
T1 is the initial temperature (141.5 ∘C)
P2 is the final pressure (unknown)
T2 is the final temperature (707 ∘C)
Plugging in the known values, we get:
395 mmHg * 707 ∘C = P2 * 141.5 ∘C
P2 = 696 mmHg
b. The initial pressure of the container was 424 psi.
To solve this, we can use the following equation : P1*V1 = P2*V2
where:
P1 is the initial pressure (unknown)
V1 is the initial volume (assumed to be constant)
P2 is the final pressure (685 psi)
V2 is the final volume (assumed to be constant)
Plugging in the known values, we get:
P1 * V1 = 685 psi * V2
P1 = 685 psi
c. The final temperature of the gas cylinder is 10 ∘C.
To solve this, we can use the following equation:
P1*T1 = P2*T2
where:
P1 is the initial pressure (82.5 atm)
T1 is the initial temperature (25 ∘C)
P2 is the final pressure (82.5 atm / 2 = 41.25 atm)
T2 is the final temperature (unknown)
Plugging in the known values, we get:
82.5 atm * 25 ∘C = 41.25 atm * T2
T2 = 10 ∘C
Thus, (a) the final pressure of the container will be 696 mmHg, (b) the initial pressure of the container was 424 psi, (c) the final temperature of the gas cylinder is 10 ∘C.
To learn more about pressure :
https://brainly.com/question/28012687
#SPJ11
If a person has a deficiency in riboflavin or vitamin B2, which
enzyme from Stage 1 of cellular respiration is mainly affected?
Riboflavin or vitamin B2 is a crucial part of the flavoproteins that act as hydrogen carriers. If a person has a deficiency of riboflavin, they cannot make these flavoproteins, which would impair the process of cellular respiration in the body.
The enzyme from Stage 1 of cellular respiration that is mainly affected when a person has a deficiency in riboflavin or vitamin B2 is flavin mononucleotide (FMN). Flavin mononucleotide (FMN) is a crucial part of the enzyme flavoprotein, which is used in the oxidation of pyruvate in stage 1 of cellular respiration. It is reduced to FADH2, which is an electron carrier that assists in ATP production through oxidative phosphorylation.Therefore, a deficiency of riboflavin in the body will have a significant impact on the ability of the flavoproteins to carry hydrogen ions during oxidative phosphorylation, which will reduce the production of ATP and, thus, reduce the amount of energy the body can generate.
To know more about ATP, visit;
https://brainly.com/question/897553
#SPJ11
Suppose 52 mL of 0.212 M HCl is titrated with 0.171 M NaOH.
Calculate the pH of the resulting mixture after the addition of
24.2 mL (total) of strong base. Enter your answer to 2 decimal
places.
The pH of the resulting mixture after the addition of 24.2 mL of 0.171 M NaOH to 52 mL of 0.212 M HCl is 5.73. This pH value indicates that the solution is slightly acidic since it is below 7 on the pH scale.
To determine the pH of the resulting mixture, we need to calculate the moles of acid and base present and then determine the excess or deficit of each component.
First, we calculate the moles of HCl:
Moles of HCl = Volume of HCl (L) × Concentration of HCl (mol/L)
= 0.052 L × 0.212 mol/L
= 0.011024 mol
Next, we calculate the moles of NaOH:
Moles of NaOH = Volume of NaOH (L) × Concentration of NaOH (mol/L)
= 0.0242 L × 0.171 mol/L
= 0.0041422 mol
Since HCl and NaOH react in a 1:1 ratio, we can determine the excess or deficit of each component. In this case, the moles of HCl are greater than the moles of NaOH, indicating an excess of acid.
To find the final concentration of HCl, we subtract the moles of NaOH used from the initial moles of HCl:
Final moles of HCl = Initial moles of HCl - Moles of NaOH used
= 0.011024 mol - 0.0041422 mol
= 0.0068818 mol
The final volume of the mixture is the sum of the initial volumes of HCl and NaOH:
Final volume = Volume of HCl + Volume of NaOH
= 52 mL + 24.2 mL
= 76.2 mL
Now we can calculate the final concentration of HCl:
Final concentration of HCl = Final moles of HCl / Final volume (L)
= 0.0068818 mol / 0.0762 L
= 0.090315 mol/L
To calculate the pH, we use the equation:
pH = -log[H+]
Since HCl is a strong acid, it dissociates completely into H+ and Cl-. Therefore, the concentration of H+ in the solution is equal to the concentration of HCl.
pH = -log(0.090315)
≈ 5.73
The pH of the resulting mixture after the addition of 24.2 mL of 0.171 M NaOH to 52 mL of 0.212 M HCl is approximately 5.73. This pH value indicates that the solution is slightly acidic since it is below 7 on the pH scale. The excess of HCl compared to NaOH leads to an acidic solution.
To know more about solution ,visit:
https://brainly.com/question/29058690
#SPJ11
1. For the chemical equation
SO2(g)+NO2(g)↽−−⇀SO3(g)+NO(g)SO2(g)+NO2(g)↽−−⇀SO3(g)+NO(g)
the equilibrium constant at a certain temperature is .
At this temperature, calculate t
The number of moles of NO₂(g) that must be added to 2.42 mol SO₂(g) in order to form 1.10 mol SO₃(g) at equilibrium is 0 mol.
The equilibrium constant expression for the given reaction is:
K = [SO₃] * [NO] / [SO₂] * [NO₂]
Given that the equilibrium constant (K) is 3.20 and the concentrations are at equilibrium, we can set up the following equation:
3.20 = (1.10 mol) * (x mol) / (2.42 mol) * (x mol)
where x represents the number of moles of NO₂(g) that must be added.
Simplifying the equation:
3.20 = (1.10 * x) / (2.42 * x)
Cross-multiplying:
3.20 * (2.42 * x) = 1.10 * x
7.744x = 1.10x
Subtracting 1.10x from both sides:
7.744x - 1.10x = 0
6.644x = 0
Dividing both sides by 6.644:
x = 0
Therefore, the number of moles of is 0 mol.
To know more about moles refer here
brainly.com/question/28239680
#SPJ11
(ii) Explain the consequence of the manufacturing process on the statistical reliability of ceramic materials for structural applications.
The consequence of the manufacturing process on the statistical reliability of ceramic materials is primarily related to the presence of flaws and defects introduced during fabrication. Ceramics are brittle materials that are susceptible to flaws and defects, such as cracks, voids, and impurities. These flaws can act as stress concentrators, leading to the initiation and propagation of cracks under applied loads.
During the manufacturing process, various steps like shaping, drying, and sintering are involved, and each of these stages can introduce or amplify flaws in the ceramic material. For example, improper mixing of ceramic powders or inadequate drying techniques can result in non-uniform density, porosity, and residual stresses, which increase the likelihood of failure.
The presence of these flaws and defects compromises the structural integrity of ceramics, reducing their reliability. The statistical reliability of ceramic materials is typically quantified using measures such as the Weibull modulus, which characterizes the distribution of strength and predicts the probability of failure. Flaws and defects reduce the Weibull modulus and introduce scatter in the material's strength, making it more challenging to predict the failure behavior accurately.
To enhance the reliability of ceramic materials, manufacturers employ rigorous quality control measures, such as careful material selection, optimized processing parameters, and post-processing treatments to minimize flaws and defects. Additionally, non-destructive testing methods, such as ultrasound or X-ray inspection, are used to detect and assess the presence of flaws, ensuring that only high-quality ceramic components are utilized in structural applications.
To know more about ceramic click here:
https://brainly.com/question/30545056
#SPJ11
Calculate either [H,O+] or [OH-] for each of the solutions at 25 °C. Solution A: [OH-] = 1.83 x 10-7 M; [H₂O*] = Solution B: [H,O*] = 9.41 x 10 M: [OH-] = Solution C: [H,O*] = 6.63 x 10M; [OH"]= Wh
Solution A:
- [H3O+]: Approximately 5.29×10^−8 M
- [OH−]: 1.89×10^−7 M
Solution B:
- [H3O+]: 8.47×10^−9 M
- [OH−]: Approximately 1.18×10^−6 M
Solution C:
- [H3O+]: 0.000563 M
- [OH−]: Approximately 1.77×10^−11 M
Based on the calculated values:
- Solution A is acidic ([H3O+] > [OH−]).
- Solution B is basic ([OH−] > [H3O+]).
- Solution C is acidic ([H3O+] > [OH−]).
Solution A:
- [OH−] = 1.89×10−7 M (given)
- [H3O+] = ?
To calculate [H3O+], we can use the ion product of water (Kw) equation:
Kw = [H3O+][OH−] = 1.0×10^−14 M^2 at 25 °C
Substituting the given [OH−] value into the equation, we can solve for [H3O+]:
[H3O+] = Kw / [OH−] = (1.0×10^−14 M^2) / (1.89×10^−7 M) ≈ 5.29×10^−8 M
Therefore, [H3O+] for Solution A is approximately 5.29×10^−8 M.
Solution B:
- [H3O+] = 8.47×10−9 M (given)
- [OH−] = ?
Using the same approach as above, we can calculate [OH−]:
[OH−] = Kw / [H3O+] = (1.0×10^−14 M^2) / (8.47×10^−9 M) ≈ 1.18×10^−6 M
Therefore, [OH−] for Solution B is approximately 1.18×10^−6 M.
Solution C:
- [H3O+] = 0.000563 M (given)
- [OH−] = ?
Again, using the Kw equation:
[OH−] = Kw / [H3O+] = (1.0×10^−14 M^2) / (0.000563 M) ≈ 1.77×10^−11 M
Therefore, [OH−] for Solution C is approximately 1.77×10^−11 M.
The complete question is:
Calculate either [H3O+] or [OH−] for each of the solutions at 25 °C.
Solution A: [OH−]=1.89×10−7 M Solution A: [H3O+]= M
Solution B: [H3O+]=8.47×10−9 M Solution B: [OH−]= M
Solution C: [H3O+]=0.000563 M Solution C: [OH−]= M
Which of these solutions are basic at 25 °C?
Solution C: [H3O+]=0.000563 M
Solution A: [OH−]=1.89×10−7 M
Solution B: [H3O+]=8.47×10−9 M
Learn more about solutions here:
https://brainly.com/question/30665317
#SPJ11
10 Question 12 Se You form B OH O NaOH Nat + H₂O
The reaction involves the formation of compound B through the reaction of an alcohol (OH) with sodium hydroxide (NaOH) in the presence of water (H₂O).
In the given reaction, an alcohol reacts with sodium hydroxide to form a compound B, along with the release of water. The specific alcohol and compound B are not specified in the question.
Alcohols are organic compounds containing a hydroxyl group (-OH) attached to a carbon atom. When an alcohol reacts with a strong base like sodium hydroxide (NaOH), a substitution reaction takes place. The hydroxyl group of the alcohol is replaced by the sodium ion (Na⁺), resulting in the formation of the compound B. This reaction is known as alcoholysis or alcohol deprotonation.
The reaction is represented as follows:
R-OH + NaOH → R-O-Na⁺ + H₂O
Here, R represents the alkyl group attached to the hydroxyl group of the alcohol.
The formation of compound B is accompanied by the formation of water (H₂O) as a byproduct. The sodium ion (Na⁺) from the sodium hydroxide takes the place of the hydroxyl group, resulting in the formation of the alkoxide ion (R-O-Na⁺).
It's important to note that the specific compound B formed will depend on the nature of the alcohol used in the reaction.
Learn more about compound here:
https://brainly.com/question/14117795
#SPJ11
In a study of the rearrangement of ammonium cyanate to urea in
aqueous solution at 50 °C NH4NCO(aq)(NH2)2CO(aq) the concentration
of NH4NCO was followed as a function of time. It was found that a
gra
1. For the rearrangement of ammonium cyanate to urea, the plot of 1/[NHNCO] versus time gave a straight line, indicating a first-order reaction with respect to NH4NCO. The slope of the line represents the rate constant, which was determined to be 1.66x10^2 M^(-1) min^(-1). 2. For the decomposition of nitramide to nitrogen dioxide and water, the plot of ln[NH2NO2] versus time gave a straight line, indicating a first-order reaction with respect to NH2NO2. The slope of the line represents the rate constant, which was determined to be -6.81x10^(-5) s^(-1).
1. In the study of the rearrangement of ammonium cyanate to urea, the plot of 1/[NHNCO] versus time resulted in a straight line. This indicates that the reaction follows first-order kinetics with respect to NH4NCO. The slope of the line in this plot represents the rate constant of the reaction, which was found to be 1.66x10^2 M^(-1) min^(-1). The positive slope indicates that the concentration of NH4NCO decreases with time.
2. In the study of the decomposition of nitramide to nitrogen dioxide and water, the plot of ln[NH2NO2] versus time resulted in a straight line. This suggests that the reaction follows first-order kinetics with respect to NH2NO2. The slope of the line in this plot represents the rate constant of the reaction, which was determined to be -6.81x10^(-5) s^(-1). The negative slope indicates that the concentration of NH2NO2 decreases exponentially with time.
In conclusion, the rearrangement of ammonium cyanate to urea is a first-order reaction with respect to NH4NCO, while the decomposition of nitramide is also a first-order reaction with respect to NH2NO2. The rate constants for these reactions were determined from the slopes of the respective plots. The negative slope for the decomposition of nitramide indicates that the concentration of NH2NO2 decreases over time, while the positive slope for the rearrangement of ammonium cyanate to urea indicates a decrease in the concentration of NH4NCO.
Learn more about ammonium cyanate here:
https://brainly.com/question/28901093
#SPJ11
The complete question is:
In a study of the rearrangement of ammonium cyanate to urea in aqueous solution at 50 °c NH4NCO(aq)NH2)2CO(aq) the concentration of NH4NCO was followed as a function of time. It was found that a graph of 1/[NHNCOl versus time in minutes gave a straight line with a slope of 1.66x102r1 min1 and a y-intercept of 1.07M1 Based on this plot, the reaction is v order in NH4NCO and the rate constant for the reaction is Mr1 min 1 zero first second Submit Answer Retry Entire Group 4 more group attempts remaining In a study of the decomposition of nitramide in aqueous solution at 25 °C NH2NO2(aq N20(g) + H2o(D the concentration of NH2NO2 was followed as a function of time It was found that a graph of In[NH2NO21l versus time in seconds gave a straight line with a slope of -6.81x10-5 s1 and a y-intercept of -1.85 ほasc d (n itus plot, ihe reaction 1:; order n NXX) N(), and thc rate constant ior ihe reaction zero first second Submit Answer Retry Entire Group 4 more group attempts remaining
CuS AICI PbOPbO Soluble Ca(C₂H₂O₂)₂ NaNO3 Answer Bank MgSO4 Mg(OH)₂ Insoluble Sr3(PO4)2 BaCO3 Ques
Among the given substances, CuS, PbOPbO, Ca(C₂H₂O₂)₂, NaNO₃, MgSO₄, and Mg(OH)₂ are soluble, while Sr₃(PO₄)₂ and BaCO₃ are insoluble.
Solubility refers to the ability of a substance to dissolve in a solvent. In this case, we are determining the solubility of the given substances.
Copper(II) sulfide (CuS) is a compound that is soluble in water. It dissociates into copper(II) ions (Cu²⁺) and sulfide ions (S²⁻) when dissolved.
Lead(II) oxide (PbOPbO) is also soluble in water. It dissociates into lead(II) ions (Pb²⁺) and oxide ions (O²⁻) when dissolved.
Calcium oxalate (Ca(C₂H₂O₂)₂) is soluble in water. It dissociates into calcium ions (Ca²⁺) and oxalate ions (C₂H₂O₂²⁻) when dissolved.
Sodium nitrate (NaNO₃) is a soluble compound. It dissociates into sodium ions (Na⁺) and nitrate ions (NO₃⁻) in water.
Magnesium sulfate (MgSO₄) is a soluble compound. It dissociates into magnesium ions (Mg²⁺) and sulfate ions (SO₄²⁻) when dissolved.
Magnesium hydroxide (Mg(OH)₂) is also soluble in water. It dissociates into magnesium ions (Mg²⁺) and hydroxide ions (OH⁻) when dissolved.
On the other hand, strontium phosphate (Sr₃(PO₄)₂) and barium carbonate (BaCO₃) are insoluble compounds. They do not readily dissolve in water and remain as solid particles when added to water.
In summary, CuS, PbOPbO, Ca(C₂H₂O₂)₂, NaNO₃, MgSO₄, and Mg(OH)₂ are soluble in water, while Sr₃(PO₄)₂ and BaCO₃ are insoluble.
Learn more about Solubility here: https://brainly.com/question/31493083
#SPJ11
Calculate the pH of each solution. pH =; [H3O+]=6.4×10−5M
Express your answer using two decimal places. pH =
The pH of the solution with [H3O+] = [tex]6.4×10^−5[/tex]M is ________.
pH is a measure of the acidity or alkalinity of a solution and is defined as the negative logarithm (base 10) of the concentration of hydronium ions ([H3O+]). To calculate the pH of a solution, we can use the formula:
pH = -log[H3O+]
In this case, the given concentration of hydronium ions is[tex]6.4×10^−5 M.[/tex] By substituting this value into the pH formula, we can determine the pH of the solution:
pH = [tex]-log(6.4×10^−5)[/tex]
Using a calculator, we can calculate the logarithm and obtain the pH value. The resulting pH will have two decimal places to express the acidity or alkalinity of the solution accurately.
It is important to note that pH values range from 0 to 14, where a pH of 7 is considered neutral, pH values below 7 indicate acidity, and pH values above 7 indicate alkalinity. Therefore, the calculated pH value will help determine the acidity or alkalinity of the solution.
Learn more about PH values
brainly.com/question/28580519
#SPJ11
Using only the periodic table arrange the following elements in order of increasing ionization energy: tin, tellurium, iodine, rubidium Lowest Highest Please answer this question according to the gene
To arrange the elements in order of increasing ionization energy using only the periodic table, we can refer to the periodic trends. Ionization energy generally increases from left to right across a period and decreases from top to bottom within a group.
The elements provided are tin (Sn), tellurium (Te), iodine (I), and rubidium (Rb).
Rubidium (Rb) is in Group 1 (alkali metals) and is located at the far left of the periodic table. Alkali metals have the lowest ionization energies in their respective periods because their valence electrons are farther away from the nucleus and experience less attraction. Therefore, Rb will have the lowest ionization energy among the given elements.
Tin (Sn) is in Group 14 (carbon group) and is located to the left of tellurium (Te). As we move across Group 14 from left to right, the ionization energy generally increases due to increasing effective nuclear charge. So, Sn will have a higher ionization energy than Rb but lower than Te and iodine (I).
Tellurium (Te) is in Group 16 (chalcogens) and is located to the right of Sn. Chalcogens have higher ionization energies than elements in Group 14. Therefore, Te will have a higher ionization energy than Sn and Rb.
Iodine (I) is in Group 17 (halogens) and is located to the right of Te. Halogens have the highest ionization energies within their periods due to their strong electron-electron repulsion. Thus, I will have the highest ionization energy among the given elements.
Based on this analysis, the elements arranged in order of increasing ionization energy are:
Rubidium (Rb) < Tin (Sn) < Tellurium (Te) < Iodine (I)
In summary, ionization energy generally increases from left to right across a period and decreases from top to bottom within a group on the periodic table. Using this trend, we can arrange the given elements in the specified order.
To know more about ionization energy, click here:-
https://brainly.com/question/28385102
#SPJ11
a. What is the pH of a solution with sodium acetate and acetic
acid given that the concentration of sodium acetate is 0.4M and the
concentration of acetic acid is 0.8M? The pKa of acetic acid is
4.76
To determine the pH of a solution containing sodium acetate and acetic acid, we need to consider the equilibrium between the acetic acid (a weak acid) and its conjugate base, acetate ion, which is provided by sodium acetate.
Acetic acid undergoes partial ionization in water, yielding H+ ions and acetate ions (CH3COOH ⇌ H+ + CH3COO-). The equilibrium constant for this dissociation is given by the acid dissociation constant, Ka.
To calculate the pH, we need to compare the concentrations of acetic acid and acetate ion and determine the ratio of their concentrations. Since acetic acid and acetate ion are in equilibrium, the ratio of their concentrations is determined by the dissociation constant, Ka, and the Henderson-Hasselbalch equation:
pH = pKa + log([acetate ion] / [acetic acid])
Given that the concentration of sodium acetate is 0.4 M and the concentration of acetic acid is 0.8 M, we can calculate the ratio [acetate ion] / [acetic acid]. However, we need the concentration of acetate ion, which can be determined by the dissociation of sodium acetate.
Sodium acetate (CH3COONa) dissociates into acetate ions and sodium ions: CH3COONa ⇌ CH3COO- + Na+. Since sodium acetate is a strong electrolyte, it dissociates completely in water, meaning the concentration of acetate ion will be equal to the concentration of sodium acetate (0.4 M).
Therefore, the concentration of acetate ion ([acetate ion]) is 0.4 M, and the concentration of acetic acid ([acetic acid]) is 0.8 M. We also have the pKa value for acetic acid, which is 4.76.
Using the Henderson-Hasselbalch equation, we can calculate the pH:
pH = 4.76 + log(0.4 / 0.8)
By performing this calculation, you can determine the pH of the solution.
Learn more about sodium acetate here:
https://brainly.com/question/32049881
#SPJ11
all
the previous questions posted for this question are wrong!! please
help
МЕИТ SECOND TO Write a balanced equation to represent the reaction shown. но-ан balanced equation: 2CH 5+ H_O_ - C_H,5 + 2H,O нан ТОВ С
The balanced chemical equation for the given reaction between ethyl alcohol and oxygen to form acetic acid and water is:
2CH₅OH + 2H₂O → 2C₂H₅OH + O₂
The given equation can be balanced as follows:
2CH₅OH + 2H₂O → 2C₂H₅OH + O₂
The balanced chemical equation represents the given reaction.
The reaction takes place between ethyl alcohol (CH₅OH) and oxygen (O₂) to form acetic acid (C₂H₅OH) and water (H₂O).
The balanced chemical equation shows that two moles of ethyl alcohol and two moles of water react to form two moles of acetic acid and one mole of oxygen.
Hence, the balanced equation for the given reaction is
2CH₅OH + 2H₂O → 2C₂H₅OH + O₂
Conclusion: The balanced chemical equation for the given reaction between ethyl alcohol and oxygen to form acetic acid and water is
2CH₅OH + 2H₂O → 2C₂H₅OH + O₂
To know more about balanced chemical equation, visit:
https://brainly.com/question/29130807
#SPJ11
What is the pressure when a gas originally at 1.81 atm and a volume
of 1.80 L is expanded to 3.16 L ?
When the gas is expanded from 1.80 L to 3.16 L, the pressure decreases to approximately 1.034 atm.
To determine the pressure when a gas expands from a volume of 1.80 L to 3.16 L, we can apply Boyle's law, which states that the pressure and volume of a gas are inversely proportional at constant temperature.
According to Boyle's law, the product of pressure and volume remains constant when the temperature is constant. We can write this as P1V1 = P2V2, where P1 and V1 are the initial pressure and volume, and P2 and V2 are the final pressure and volume, respectively.
Given:
Initial pressure (P1) = 1.81 atm
Initial volume (V1) = 1.80 L
Final volume (V2) = 3.16 L
Using the formula P1V1 = P2V2, we can solve for P2 (final pressure):
P2 = (P1V1) / V2
= (1.81 atm * 1.80 L) / 3.16 L
≈ 1.034 atm
Therefore, when the gas is expanded from 1.80 L to 3.16 L, the pressure decreases to approximately 1.034 atm.
Learn more about pressure here:
https://brainly.com/question/28012687
#SPJ11