Define emf of a battery? ​

Answers

Answer 1

Answer:

Electromotive force or EMF is equal to the terminal potential difference when no current flows. EMF (ϵ) is the amount of energy (E) provided by the battery to each coulomb of charge (Q) passing through.


Related Questions

The force of ____________ exists between any two objects that have mass.
free fall
acceleration
weight
gravity

Answers

Answer:

gravity

Explanation:

You have just learned that the planet core of Mars is no longer radiating heat like the core of Earth. With this information what would you communicate to building designers as the lead geologist in regards to suitable building locations on the surface of Mars? Remember your informing builders about locations that would best avoid natural disasters like marsquakes and volcanoes? What evidence or theories do you have to support your statements?

Answers

Answer:

Explanation:

That is a fun question!

Without a hot radiating core like Earth, Mars will have very different geological and seismic events. The Mars core will be relatively cold and there will not be any molten magma. So Mars will not have earthquakes or volcano activities. Both only occur when there is magma flowing or tectonic plate motion and they will not occur with a cold core.

Which is a valid ionic compound?

sodide chlorine
sodium chlorine
sodium chloride
sodide chloride

Answers

Answer:

sodium chloride

Explanation:

Sodium chloride is an ionic compound. The ions of the sodium chloride compound is sodium ion and chloride ion.  The sodium ion is cation while the chloride ion is an anion. Sodium chloride is a very stable compound because of the mutual attraction of oppositely charged ions.

If a positively charged rod is brought near the knob of a positively charged electroscope, the leaves of the electroscope will...
A) converge, only
B) diverge, only
C) first diverge, then converge
D) first converge, then diverge

Answers

I think it’s gonna be A.

Answer:

B

Explanation:

if a positively charged rod is brought near the knob of a neutral electroscope, it will attract some electrons up from the leaves onto the knob. That process causes both of the leaves to be positively charged (excess protons), and the leaves will diverge.

Explain how frequency and amplitude affect sound vibrations?

Answers

Answer:

The larger the amplitude of the waves, the louder the sound. Pitch (frequency) – shown by the spacing of the waves displayed. The closer together the waves are, the higher the pitch of the sound.

Explanation:

Pop up spring Lab
Describe the energy conversion that took place. What energy was present just before the jump? What energy is present at its maximum height? What happens in between?
Draw bar charts of energy before the jump, while the spring toy is compressed and after the jump at the maximum height of its jump. Be sure to label each type of energy.

Answers

Answer:

I honestly don't know but that thing looks cool lol

A table is moved using 60 N of force.
How far is the table moved if 900 J of work is done on the table?
960 m
840 m
15 m
0.06 m

Answers

Answer:

15m

Explanation:

W=f×s

[tex]s = \frac{w}{f} \\ s = \frac{900j}{60n} \\ s = 15m [/tex]

The table moved "15 m".

Given:

Force,

F = 60 N

Work done,

W = 900 J

We know,

→ [tex]W = F\times s[/tex]

or,

→ [tex]s = \frac{W}{F}[/tex]

By putting the values, we get

      [tex]= \frac{900}{60}[/tex]

      [tex]= 15 \ m[/tex]

Thus the above response i.e., "Option c" is right.

Learn more about work done here:

https://brainly.com/question/8625856

What are the si units

Answers

Answer:

The uniy which is accepted all over the world is called SI unit.

Explanation:

The system of measurement that is agreed by the international convention if scientists that is held in paris of France to adopt an international unit is called SI unit unit.

An aluminum-alloy rod has a length of 10.0 cm at 20°C and a length of 10.015 cm at the boiling point of water (1000C). (a) What is the length of the rod at the freezing point of water (0 0C)? (b) What is the temperature if the length of the rod is 10.009 cm? /4mks

Answers

Answer:

a.  9.99625 cm b. 68 °C

Explanation:

(a) What is the length of the rod at the freezing point of water (0 0C)?

Before we find the length of the rod, we need to find the coefficient of linear expansion, α = (L - L₀)/[L₀(T - T₀)] where L₀ = length of rod at temperature T₀ = 10.0 cm, T₀ = 20 °C, L = length of rod at temperature T = 10.015 cm and T = 100 °C

Substituting the values of the variables into the equation, we have

α = (L - L₀)/[L₀(T - T₀)]

α = (10.015 cm - 10.0 cm)/[10.0 cm(100 °C - 20 °C)]

α = 0.015 cm/[10.0 cm × 80 °C]

α = 0.015 cm/[800.0 cm °C]

α = 0.00001875 /°C

We now find the length L₁ at T₁ = 0 °C from

L₁ = L₀(1 + α(T₁ - T₀))

So, substituting the values of the variables into the equation, we have

L₁ = L₀(1 + α(T₁ - T₀))

L₁ = 10.0 cm[1 +  0.00001875 /°C(0° C - 20 °C)]

L₁ = 10.0 cm[1 +  0.00001875 /°C × -20° C]

L₁ = 10.0 cm[1 - 0.000375]

L₁ = 10.0 cm[0.999625]

L₁ = 9.99625 cm

(b) What is the temperature if the length of the rod is 10.009 cm?

With length L₃ = 10.009 cm at temperature T₃, using

L₃ = L₀(1 + α(T₃ - T₀))

making T₃ subject of the formula, we have

L₃/L₀ = 1 + α(T₃ - T₀)

L₃/L₀ - 1 = α(T₃ - T₀)

T₃ - T₀ = (L₃/L₀ - 1)/α

T₃ = T₀ + (L₃/L₀ - 1)/α

substituting the values of the variables into the equation, we have

T₃ = 20 °C + (10.009 cm/10.0 cm - 1)/0.00001875 /°C

T₃ = 20 °C + (1.0009 - 1)/0.00001875 /°C

T₃ = 20 °C + 0.0009/0.00001875 /°C

T₃ = 20 °C + 48 °C

T₃ = 68 °C

What would happen to the distance between the bright fringes produced by a diffraction grating if the entire interference apparatus (light source, grating, and screen) were immersed in water

Answers

Answer:

Since the wavelength would be reduced by the factor of N where N is the index of refraction, fringes would be be closer to one another.

(Similar to the difference of fringes of red light and blue light.)


What are some core features of waves in physics?

Answers

Answer:

Waves are disorders that travel through a fluid medium. Several simple wave features include frequency, period, wavelength, and amplitude.

Explanation:

La resistividad de cierto alambre es 1.72x10 -8 Ωm a 20 oC .Una batería de 6v se conecta a una bobina de 20 m de este alambre, con un diámetro de 0.8 mm. ¿Cuál es la corriente en el alambre?

Answers

Answer:

   i = 1.09 10⁴ A

Explanation:

For this exercise we will look for the resistance of the wire

          R = ρ L / a

the area of ​​the wire is

          a =ππ r² = π πd² / 4

we substitute

         R = ρ L 4 / π d²

          R = 1.72 10⁻⁸   20  4/π 8 10⁻⁴

         

         R = 5.47 10⁻⁴ Ω

to calculate the current we use ohm's law

           V = R i

            i = V / R

            i = 6 / 5.47 10⁻⁴

            i = 1.09 10⁴ A

A 15-watt bulb is connected to a circuit that has a total of 60. Ω of resistance. How many electrons are passing through that bulb every second?

Answers

Answer:

3.2075*10^16

Explanation:

Q=P/V just search up a converter and youll get 30V and so you do 15/30 which is a half and a single coulomb is 6.415*10^16 so you half it. I belive this is correct if you dont belive me wait for someone else smarter to answer and compare.

Jorge tightens a bolt on his bicycle with a wrench that is 0.20 m long. If he pulls perpendicularly on the end of the wrench with a force of 140 N, how much torque does he apply ?

Answers

Answer:

28Nm

Explanation:

Torque is expressed as the prduct of force and radius

Given

Force = 140N

radius  = 0.20m

Torque = 140 * 0.2

Torque = 140 * 1/5

Torque = 28Nm

Hence the amouunt of torque applied is 28Nm

A parallel combination of 3ohms and 4ohms resistor is connected in series with a resistor of 4ohms and a battery of negligible resistance. Calculate the effective resistance in the circuit

Answers

Answer:

Explanation:

Equivalent resistance of parallel combination of two resistors of 3 ohms and 4 ohms .

R₁ = 3 x 4 / ( 3 + 4 )

= 12 / 7 = 1.7 ohms .

This equivalent resistance is connected with 4 ohms in series

Total resistance = 1.7 ohms + 4 ohms

= 5.7 ohms.

Hence effective resistance of the circuit = 5.7 ohms .

A spring with a spring constant of 2.5 N/m is stretched by 0.2 m. What is the potential energy in the spring

Answers

Answer:

Explanation:

PE = [tex]\frac{1}{2}k[/tex](Δ[tex]x^2[/tex])

where k is the spring constant and Δx is the displacement of the spring when an object is hung from it. Plugging in:

[tex]PE=\frac{1}{2}(2.5)(.2^2)[/tex] which gives us

PE = .05 J

help me calculate the kinetic energy (just the middle column) ASAP! SHOW WORK! ON PAPER

Answers

Answer:

Explanation:

I can tell you what the answers for the middle column are, but if you don't know how to solve total energy problems, they won't make any sense to you at all.

First row, KE = 0

Second row, KE = 220500 J

Third row, KE = 183750 J

Fourth row, KE = 205800 J

That's also not paying any attention to significant digits because your velocity only had 1 and that's not enough to do the problem justice. I left all the digits in the answer. Round how your teacher tells you to.

Astronomical observatories have been available since ancient times, and many cultures set aside special sites for astronomical observations. The thing modern observatories have that was missing from these older observatories until about 1610 was __________________. Group of answer choices

Answers

Answer:

The answer is "telescopes".

Explanation:

Throughout ancient times, astronomical observatories have indeed been available, and so many historical locations were reserved for astronomical observations. All contemporary astronomers lacked within those older telescopes were lenses until 1610. A telescope is indeed an instrument used to view far-off objects. Telescopes often are being used to look at planets and stars.

A (200 g) of water at (80 °C) is mixed with (100 g)of water at (20 °C). What is the final temperature of the water?

Answers

Answer:

60 °C

Explanation:

From the question given above, the following data were obtained:

Mass of 1st sample (M₁) = 200 g

Temperature of 1st sample (T₁) = 80 °C

Mass of 2nd sample (M₂) = 100 g

Temperature of 2nd sample (T₂) = 20 °C

Equilibrium temperature (Tₑ) =?

NOTE: Since the sample are the same, the specific heat capacity is constant.

We can obtain the equilibrium temperature as follow:

Heat lost by 1st = heat gained by the 2nd

M₁C(T₁ – Tₑ) = M₂C(Tₑ – T₂)

Cancel out C

M₁(T₁ – Tₑ) = M₂(Tₑ – T₂)

200 (80 – Tₑ) = 100 (Tₑ – 20)

Clear bracket

16000 – 200Tₑ = 100Tₑ – 2000

Collect like terms

16000 + 2000 = 100Tₑ + 200Tₑ

18000 = 300Tₑ

Divide both side by 300

Tₑ = 18000 / 300

Tₑ = 60 °C

Therefore, the equilibrium temperature (i.e the final temperature) of the mixture is 60 °C.

Two rigid rods are oriented parallel to each other and to the ground. The rods carry the same current in the same direction. The length of each rod is 1.1 m, while the mass of each is 0.10 kg. One rod is held in place above the ground, and the other floats beneath it at a distance of 11 mm. Determine the current in the rods.

Answers

Answer:

220 A

Explanation:

The magnetic force on the floating rod due to the rod held close to the ground is F = BI₁L where B = magnetic field due to rod held close the ground = μ₀I₂/2πd where μ₀ = permeability of free space = 4π × 10⁻⁷ H/m, I₂ = current in rod close to ground and d = distance between both rods = 11 mm = 0.011 m. Also, I₁ = current in floating rod and L = length of rod = 1.1 m.

So, F = BI₁L

F = (μ₀I₂/2πd)I₁L

F = μ₀I₁I₂L/2πd

Given that the current in the rods are the same, I₁ = I₂ = I

So,

F = μ₀I²L/2πd

Now, the magnetic force on the floating rod equals its weight , W = mg where m = mass of rod = 0.10kg and g = acceleration due to gravity = 9.8 m/s²

So, F = W

μ₀I²L/2πd = mg

making I subject of the formula, we have

I² = 2πdmg/μ₀L

I = √(2πdmg/μ₀L)

substituting the values of the variables into the equation, we have

I = √(2π × 0.011 m × 0.1 kg × 9.8 m/s²/[4π × 10⁻⁷ H/m × 1.1 m])

I = √(0.01078 kgm²/s²/[2 × 10⁻⁷ H/m × 1.1 m])

I = √(0.01078 kgm²/s²/[2.2 × 10⁻⁷ H])

I = √(0.0049 × 10⁷kgm²/s²H)

I = √(0.049 × 10⁶kgm²/s²H)

I = 0.22 × 10³ A

I = 220 A

A nucleus with mass number 229 emits a 3.443 MeV alpha particle. Calculate the disintegration energy Q for this process, taking the recoil energy of the residual nucleus into account.

Answers

Answer:

3.504 MeV

Explanation:

Given that;[tex]\frac{A}{Z} X ---->\frac{A-4}{Z-2} Y +\alpha + Q[/tex]

Also;

[tex]Q= KE_{\alpha } (M_{Y} + M_{\alpha } /M_{Y[/tex])

Mass number of X = 229

Mass number of Y = 225

Mass number of alpha particles = 4

Kinetic energy of alpha particles = 3.443 MeV

Q = 3.443 MeV (225 + 4/225)

Q= 3.504 MeV

Which statement best describes the Sun Earth-Moon system?

Answers

Answer:

A

Explanation:

A. The Moon orbits the Earth, and the Earth-Moon system orbits the Sun

B. The Earth and Moon both orbit the Sun separately

C. The Sun orbits the Earth-Moon system

D. The Moon revolves around Earth but not the Sun

Describe how to determine the thickness of a sheet of a paper without a caliper.​

Answers

Answer:

Divide the total measurement of the stack/ream of paper by the number of sheets. For example: 2 inches/100 pages = 0.01-inches sheets.

In case you measured the stack, and it gave you less than an inch, then you need to do the same. For example: 0.5-inches/100 sheets = 0.005-inches per sheet.

Answer:

Divide the total measurement of the stack/ream of paper by the number of sheets. For example: 2 inches/100 pages = 0.01-inches sheets.

In case you measured the stack, and it gave you less than an inch, then you need to do the same. For example: 0.5-inches/100 sheets = 0.005-inches per sheet.

Explanation:

8× +5+9×+3 how can I solve this​

Answers

Answer:

collect like terms then add

=>8x+9x+5+3

=>8x+9x+5+3=>17x+8

Physicist ____ was found to have completely made up some of the data on which his astounding discoveries were made.

Answers

Answer:

Jan Hendrik Schön I believe

A charge Q acts on a point charge to create an electric field. Its strength, measured a distance of 40 cm away is 100 N/C. What is the magnitude of the electric field strength at a distance of 20 cm

Answers

Answer:

[tex]E_2=80N/C[/tex]

Explanation:

From the question we are told that:

Initial Distance [tex]d_1=40cm=>0.4m[/tex]

Initial Electric field strength [tex]E_1=100N/C[/tex]

Final Distance [tex]d_2=20cm=>0.20m[/tex]

Generally the equation for Electric field is mathematically given by.

 [tex]E=\frac{kq}{d^2}[/tex]

 [tex]q=\frac{100*(0.4)^2}{K}[/tex]

Substituting q for [tex]d=20cm[/tex]

 [tex]E_2=\frac{k}{0.2}*\frac{100*(0.4)^2}{K}[/tex]

 [tex]E_2=80N/C[/tex]

True or false
scientific research has now proven that atoms are composed of parts that are larger than protons neutrons and electrons

Answers

Answer:

False

Explanation:

parts that are smaller than protons neutrons and electrons

False .......hope this helped you out

A bird in flight pushes itself upward with
a 7.28 N force. If the bird is climbing at a
constant rate of 1 m/s (no acceleration),
what is the weight of the bird?
[?] N

Answers

Answer:

The weight of the bird is equal to 7.28 N.

Explanation:

The upward force acting on the bird = 7.28 N

The bird is climbing at a constant rate of 1 m/s.

We need to find the weight of the bird.

We know that the weight of an object is the force of gravity acting on it. It can be calculated as follows :

W = mg

In this case, 7.28 N of force is acting on the object. Hence, the weight of the bird is equal to 7.28 N.

20 POINTS:
Why does the initial hill of a roller coaster need to be steep?

Answers

Answer: A roller coaster does not have an engine to generate energy. The climb up the first hill is accomplished by a lift or cable that pulls the train up. This builds up a supply of potential energy that will be used to go down the hill as the train is pulled by gravity

Hope this helps! Good luck with future homework and exams!

a roller coaster does not have a engine to generate energy they climb up the first hill is accomplished. by a lift or a cable that pulls the train up . this builds a supply of potential energy that will be used to go down the coaster.

Which object will take the most force
to accelerate? *
4 kg
6 kg
8 kg
02 kg

Answers

Answer:

I think it might be 8kg grams because it is bigger

Other Questions
The term variation describes the degree to which an object or idea differs from others of the same type or from a standard. a. Trueb. False Why should foreign born should be president?? Is hale a good person?why or why not your parents have just organised a birthday party for you.write diary entries for two days.The first entry must be the day before the party and the second one the day of the party compare the time period of two pendulums of length 4m and 9m Help please Briefly explain how technology affects promotional strategies. which list of numbers is ordered from least to greatest help pls A baseball card that was valued at $200 in 1980 has increased in value by 7% each year. Write a function to model this situation, then find the value of the card in 2016 what is the answer? please helppp The Gero crucifix, shown above, was made from which of these materials Please help please no links please explain Louis is a member of the marketing team on the Superb Mattress account. Recently, he has emerged as a team leader. His supervisor, Michele, is letting Louis make the final decision as to which campaigns are presented to the client. This provides Louis with 58 points!!!! and brainlist!!!1. Do you think the state can exist without the concepts of Political Science? Why.? 2. In your opinion, what does the quote Man is by nature a political animal means.? Which of the following would likely happen if a persons lactic acid system had difficulty breaking down glycogen in the muscles?The person would have difficulty running a marathon.The person would have difficulty sprinting in a race.The person would have difficulty swimming across a lake.The person would have difficulty cycling down a hill. What is the surface area of each figure? Round to the nearest tenth if necessary. Which experiment should be conducted as a field investigation? How many grams of LiF are needed to make 87 g LiF solution into a34.5% solution?solution?answer options:30 g LIF0.01 g LIF45.8 g LIF0.02 g LIF Which is a true statement based on the dot plots below?10 20 30 40 50 6010 20 30 40 50 60Set A if you found any words about mathematics, tell me please The Topic is Should teens be allowed to play dangerous sports, Yes they should )You have previously written the introduction and body paragraphs of your argument. Now you will write the conclusion to complete this argument.Be sure to use the information you previously collected in your Argument Organizer and your writing.In your conclusion, remember to:Use a conclusion transition phrase at the beginning of your paragraphRestate your claim in a new wayRemind readers of your topic and why it is importantSummarize your argumentEnd with one of these four clinchers:Call for actionShow positive changeShow negative effectsDiscuss future researchWrite three or more complete sentencesWrite in the formal style using the third person point of view.