Answer:
Boiling of a liquid
The plateau at the lower temperature represents option A. Boiling of a liquid.
Representation of the plateau at the lower temperature:At the time when the heating curve should have two flat line or the plateaus so here the lower temperature shows the boiling of the liquid.
As the first plateau shows the melting and the second plateau shows the boiling.
hence, the option a is correct.
Learn more about temperature here: https://brainly.com/question/22262659
Using what you know about the structures of the amino acid side chains and the mechanisms presented in this chapter, which of the following amino acid side chain may play the following roles in an enzymatic mechanism: a. participate in proton transfer, b. act as a nucleophile
Answer:
a. participate in proton transfer - His
b. acts as a nucleophile - Ser
Explanation:
Enzymes are regulated because they are proteins. They are categorize based on how they catalyze. Heat weakens and inactivates the enzymes because of non covalent interaction. His amino acid participate in proton transfer because it is able to act as an acid as well as a base while Ser amino acid can act as nucleophile.
Which best compares kinetic energy and temperaturo?
A. Kinetic energy is energy of motion, while temperature is a measure of that energy in substances.
B. Temperature is energy of motion, whilo kinetic energy is a measure of that energy in substances,
C.Kinetic energy is internal transferable energy, while temperature is a measure of that energy in substances,
D.Temperature is internal transferable energy, while kinetic energy is a measure of that energy in substances.
Which best compares kinetic energy and temperature?
[tex]{\boxed{\mathcal{\red{Answer:}}}}[/tex]
A. Kinetic energy is energy of motion, while temperature is a measure of that energy in substances. ✅
[tex]\circ \: \: { \underline{ \boxed{ \sf{ \color{green}{Happy\:learning.}}}}}∘[/tex]
Answer:
A. Kinetic energy is energy of motion, while temperature is a measure of that energy in substances.
Explanation:
got it right on edge 2021
What is the mass of a gas with a molar mass of 44.01 g/mol at a temperature of 298 K, a pressure of 0.957 atm and a volume of 1.30L?
Answer:
2.24 g
Explanation:
First we use the PV=nRT formula to calculate the number of moles of the gas:
0.957 atm * 1.30 L = n * 0.082 atm·L·mol⁻¹·K⁻¹ * 298 Kn = 0.0509 molThen we can use the given molar mass to calculate the mass:
Molar Mass = Mass / number of moles44.01 g/mol = Mass / 0.0509 molMass = 2.24 gWhat volume is occupied by 0.108 mol of helium gas at a pressure of 0.96 atm and a
temperature of 315 K?
Express your answer using two significant figures.
Answer:
[tex]V=2.9L[/tex]
Explanation:
Hello there!
In this case, by considering the given information in this problem, it is possible for us to infer that this problem is solved by using the ideal gas equation:
[tex]PV=nRT[/tex]
Next, since we are given the moles, pressure and temperature, we proceed as follows:
[tex]V=\frac{nRT}{P}[/tex]
Then, we plug in the given data to obtain:
[tex]V=\frac{0.108mol*0.08206\frac{atm*L}{mol*K}*315K}{0.96atm}\\\\V=2.9L[/tex]
Best regards!
An unbalanced chemical equation:a. does not obey Conservation of Mass law b.does obey Conservation of Mass law c.has equal numbers of atoms of each element in both reactants and productsd.none of the above
Answer:
a. Does not obey Conservation of Mass law
Explanation:
An example of an unbalanced chemical equation is:
H₂SO₄ + NaOH → Na₂SO₄ + H₂OAs you can see, there are two Na atoms on the right side of the equation, while only one on the left side, causing the masses on both sides of the equation to not be equal. In other words, not fulfilling the Conservation of Mass law.
Compare with the correctly balanced equation:
H₂SO₄ + 2NaOH → Na₂SO₄ + 2H₂ONow both sides of the equation possess the same number of atoms for each element.
what geological forces might be responsible for the range of mountains
Answer:
Mountains are built by tectonic processes that cause portions of the Earth's crust to rise. These processes are fueled by the escape of heat from the interior of the Earth, causing crustal uplift by volcanic activity and by movement along faults that, in turn, is responsible for the formation of mountains.
Explanation:
How many hydrogen atoms are in 0.1854 mol
of H2SO4?
Answer in units of atoms H.
Sulfuric Acid, H2SO4 is a chemical compound made up of two hydrogen atom, one sulfer atom, and four oxygen atoms.
help please
A gas in a sealed container has a pressure of 125 kPa at a temperature of 303K. If the temperature in the container is increased to 487K, what is the new pressure?
A 201kpa
B 200kpa
C 400kpa
D 78kpa
Answer:
A. 201 kPa
Explanation:
We can solve this problem by using Boyle's law, which states:
P₁T₂ = P₂T₁Where subscript 1 stands for the initial Pressure and Temperature, while 2 stands for the final conditions. That means that in this case:
P₁ = 125 kPaT₂ = 487 KP₂ = ?T₁ = 303 KWe input the data:
125 kPa * 487 K = P₂ * 303 KAnd solve for P₂:
P₂ = 201 kPaA gas has a volume of 450. mL at 55.0 °C. If the volume changes to 502 ml, what is the new temperature?
Answer:
92.9 °C
Explanation:
Step 1: Given data
Initial volume (V₁): 450. mLInitial temperature (T₁): 55.0 °CFinal volume (V₂): 502 mLStep 2: Convert 55.0 °C to Kelvin
We will use the following expression.
K = °C + 273.15 = 55.0 + 273.15 = 328.2 K
Step 3: Calculate the final temperature of the gas
If we assume constant pressure and ideal behavior, we can calculate the final temperature of the gas using Charles' law.
T₁/V₁ = T₂/V₂
T₂ = T₁ × V₂/V₁
T₂ = 328.2 K × 502 mL/450. mL = 366 K = 92.9 °C
What is the mass in grams of 5.50 moles of Copper, Cu?
Answer:
349.503 g
https://www.convertunits.com/from/moles+Copper/to/grams
here is a link, you can convert moles of copper to grams here
The answer is 5.50 moles of Cu (Copper) has 349.503 grams mass .
What is a mole ?
A mole is defined as 6.02214076 × 10²³ atoms, molecules, ions, or other chemical units.
and the molar mass of a substance is defined as the mass of 1 mole of that substance, expressed in grams per mole.
It is equal to the mass of 6.022 × 10 23 atoms, molecules, or formula units of that substance.
1 mole of Cu has 63.546 grams of Cu
So 5.50 moles will have 5.50 * 63.546 grams
=349.503 grams
Therefore 5.50 moles of Cu (Copper) has 349.503 grams mass .
To know more about moles
https://brainly.in/question/148570
#SPJ2
what are ambident nucleopliles
Answer:
I hope this helps you
.......................................
A 10.00 mL sample of a solution containing formic acid (a weak acid) was placed in a 25 mL volumetric flask and diluted to the mark with water. A 10.00 mL sample of the diluted formic acid solution was then titrated with 0.1322 M sodium hydroxide. The titration required 15.80 mL of sodium hydroxide to reach the equivalence point. Calculate the molarity and the percentage (by mass) formic acid in the original solution. The density of the formic acid solution was found to be 1.02 g/mL.
Answer:
Molarity: 0.522M
Percentage by mass: 2.36 (w/w) %
Explanation:
Formic acid, HCOOH reacts with NaOH as follows:
HCOOH + NaOH → NaCOOH + H₂O
To solve this question we must find the moles of NaOH added = Moles formic acid. Taken into account the dilution that was made we can find the moles -And molarity of formic acid and its percentage by mass as follows:
Moles NaOH = Moles HCOOH:
0.01580L * (0.1322mol / L) =0.002089 moles HCOOH
Moles in the original solution:
0.002089 moles HCOOH * (25mL / 10mL) = 0.005222 moles HCOOH
Molarity of the solution:
0.005222 moles HCOOH / 0.01000L =
0.522MMass HCOOH in 1L -Molar mass: 46.03g/mol-
0.522moles * (46.03g / mol) = 24.04g HCOOH
Mass solution:
1L = 1000mL * (1.02g / mL) = 1020g solution
Mass percent:
24.04g HCOOH / 1020g solution * 100
2.36 (w/w) %
Select all of the abiotic factors in an ecosystem.
Plants
Sunlight
Soil
Animals
Rocks
Dead deer in the forest
Temperature
Answer:
Sunlight, Soil, Rocks, Temperature and dead deer
Explanation:
You could say the dead tree is now an abiotic factor because biotic factors refer to living things
How much heat does it take to increase the temperature of 2.70 mol of an ideal gas by 30.0 K near room temperature if the gas is held at constant volume and is diatomic
Answer:
1683.6J
Explanation:
Given:
n= no. Of mol= 2.70 mol
T= Temperature= 30.0 K
Q= n Cv × ∆T .........eqn(1)
Where CV= molar heat capacity=5/2R for diatomic particle ,such as H2
CV= molar heat capacity=3/2R for diatomic, such as H
R= gas constant= 8.314 J/mol.K
Q= heat energy
For a diatomic molecules
Q= n Cv × T
But
Cv= molar heat capacity=5/2R = 5/2(8.314)=20.785
CV= 20.785
. ∆T= Temperature= 30.0 K
Then substitute the values into the eqn(1)
Q= 2.70 × 5/2(8.314) × 30
Q= 2.70 × 20.785 × 30
=1683.6J
Evaluate each of the statements below. Select those that accurately describe the role of genes and chromosomes in
the process of inheriting a specific trait. Choose ALL that apply.
-0)
A)
Chromosomes are made of DNA.
B)
There are 26 pairs of chromosomes in humans.
C)
Alleles are the different forms of a gene that can exist.
D)
Chromosomes contain genes that control the inheritance of traits.
E)
Genes are made of chromosomes and contain all of the genetic information
for an organism.
Answer:
HEY CAN YOU POST YOUR LAST QUESTION AGAIN? CAUSE I HAVE THE ANSWER
What are the characteristics of acids and bases, and some examples of each?
Answer:
Acids taste sour while bases taste bitter. An acid reacts with metals to produce bubbles of hydrogen gas while a base feels slimy to the touch. Acids turn blue litmus paper red while bases turn red litmus paper blue.
The total number of sodium atoms in 46.0 grams of sodium
is
A flask contains 85.5 grams C12H2011 (sucrose) in 1.00 L of solution. What is the molarit
Your answer.
3.8 M
25 M
10M
1.2M
Answer:
0.25 M
Explanation:
First we convert 85.5 grams of sucrose into moles, using its molar mass:
Molar Mass of C₁₂H₂₂O₁₁ = (Molar Mass of C)*12 + (Molar Mass of H)*22 + (Molar Mass of O)*11Molar Mass of C₁₂H₂₂O₁₁ = 342.3 g/mol85.5 g ÷ 342.3 g/mol = 0.25 molThen we divide the number of moles by the number of liters to calculate the molarity:
0.25 mol / 1.00 L = 0.25 MTrue or False
Low temperatures lead to faster dissolution rates compared to high temperatures
Answer:
false
Explanation:
this is because , high temperature speeds up the the random motion of particles which leads to high dissolution
Two iron-clad characteristics of matter
are that it has mass and also exhibits
which of the following?
A. It flows from hot to cold.
B. It can do work,
C. It has volume (takes up space).
D. It is a solid.
Answer:
it has volume( takes up space).
Explanation:
The characteristics of matter are that it has mass and also exhibits volume (takes up space).Hence Option (C) is Correct.
What is Matter ?A physical substance in general, that which occupies space and possesses rest mass, especially as distinct from energy.
Matter is important because it makes up everything around us and matter can not be created or destroyed but instead, they just transformed into a different form.
Any characteristic that can be measured, such as an object's density, colour, mass, volume, length, malleability, melting point, hardness, odour, temperature, and more, are considered properties of matter.
Therefore, The characteristics of matter are that it has mass and also exhibits volume (takes up space).Hence Option (C) is Correct.
Learn more about Matter here ;https://brainly.com/question/25860850
#SPJ2
28. If the total pressure of a mixture of four gases (neon, carbon dioxide, oxygen and hydrogen) is 1245 mm
Hg, what is the pressure of neon gas if the pressure of carbon dioxide is 145 mm Hg, the pressure of hydrogen is
499 mm Hg and the pressure of oxygen is 228 mm Hg?
A) 601 mm Hg
B) 746 mm Hg
C) 872 mm Hg
D) 373 mm Hg
Answer:
D) 373 mm Hg.
Explanation:
We can solve this problem by keeping in mind Dalton's law of partial pressures, which states that the total pressure of a mixture of gases is equal to the sum of each gas' partial pressures. In other words, for this case:
Total Pressure = Ne Pressure + CO₂ Pressure + O₂ Pressure + H₂ Pressure1245 mm Hg = Ne Pressure + 145 mm Hg + 228 mm Hg + 499 mm HgNe Pressure = 373 mm HgThe answer is option D) 373 mm Hg.
Calculate the mass percent (m/m) of a solution prepared by dissolving 51.56 g of NaCl in 164.2 g of H2O. Express your answer to four significant figures. View Available Hint(s)
Answer:
"23.896%" is the right answer.
Explanation:
The given values are:
Mass of NaCl,
= 51.56 g
Mass of H₂O,
= 165.6 g
As we know,
⇒ Mass of solution = [tex]Mass \ of \ (NaCl+H_2O)[/tex]
= [tex]51.56+164.2[/tex]
= [tex]215.76 \ g[/tex]
hence,
⇒ [tex]Mass \ percent =\frac{Mass \ of \ NaCl}{Mass \ of \ solution}\times 100[/tex]
[tex]=\frac{51.56}{215.76}\times 100[/tex]
[tex]=23.896 \ percent[/tex]
As the temperature increases from 0°C to 25°C the amount of NH3 that can be dissolved in 100 grams of water.
A) decreases by 10 grams
B) decreases by 40 grams
C) increases by 10 grams
D) increases by 40 grams
Answer:
decreases by 10 gram
Explanation:
One kilogram of water at 100 0C is cooled reversibly to 15 0C. Compute the change in entropy. Specific heat of water is 4190 J/Kg.K.
Answer:
The change in entropy is -1083.112 joules per kilogram-Kelvin.
Explanation:
If the water is cooled reversibly with no phase changes, then there is no entropy generation during the entire process. By the Second Law of Thermodynamics, we represent the change of entropy ([tex]s_{2} - s_{1}[/tex]), in joules per gram-Kelvin, by the following model:
[tex]s_{2} - s_{1} = \int\limits^{T_{2}}_{T_{1}} {\frac{dQ}{T} }[/tex]
[tex]s_{2} - s_{1} = m\cdot c_{w} \cdot \int\limits^{T_{2}}_{T_{1}} {\frac{dT}{T} }[/tex]
[tex]s_{2} - s_{1} = m\cdot c_{w} \cdot \ln \frac{T_{2}}{T_{1}}[/tex] (1)
Where:
[tex]m[/tex] - Mass, in kilograms.
[tex]c_{w}[/tex] - Specific heat of water, in joules per kilogram-Kelvin.
[tex]T_{1}[/tex], [tex]T_{2}[/tex] - Initial and final temperatures of water, in Kelvin.
If we know that [tex]m = 1\,kg[/tex], [tex]c_{w} = 4190\,\frac{J}{kg\cdot K}[/tex], [tex]T_{1} = 373.15\,K[/tex] and [tex]T_{2} = 288.15\,K[/tex], then the change in entropy for the entire process is:
[tex]s_{2} - s_{1} = (1\,kg) \cdot \left(4190\,\frac{J}{kg\cdot K} \right)\cdot \ln \frac{288.15\,K}{373.15\,K}[/tex]
[tex]s_{2} - s_{1} = -1083.112\,\frac{J}{kg\cdot K}[/tex]
The change in entropy is -1083.112 joules per kilogram-Kelvin.
Answer:
The change in entropy = [tex]-1083.534 J/k[/tex]Explanation:
Change in entropy,
[tex]\delta S = mCp * In[\frac{T2}{T1}][/tex]
The initial temperature,
[tex]T1 = 100^oC\\\\T1 = 100+273\\\\T1 = 373k[/tex]
Final value of temperature,
[tex]T2 = 15^oC\\\\T2 = 15+273\\\\T2 = 288k[/tex]
where,
[tex]m = 1kg\\\\Cp = 4190 J/kg.k[/tex]
Substitute into [tex]\delta S[/tex]
[tex]\delta S = mCp * In[\frac{T2}{T1}]\\\\\delta S = 1 * 4190 * In[\frac{288}{373}]\\\\\delta S = 4190 * In[0.7721]\\\\\delta S = 4190 * [-0.2586]\\\\\delta S = -1083.534 J/k[/tex]
The negative sign exists because the change in entropy will be decreasing due to cooling.
For more information on this visit
https://brainly.com/question/17756498
An atmospheric concentration of 380 ppm CO2 corresponds to a partial pressure of 0.00038 atm. What percentage of the CO2 originally dissolved in the solution in Part A remains in solution after the soft drink reaches equilibrium with the ambient atmosphere
Answer:
8.44 * 10^-3 %
Explanation:
The solubility of CO2 gas in water is 0.15g/100 ml at a CO2 pressure of 760 mmHg.
Determine the percentage of the CO2 that dissolved originally in the solution that remains
Amount remaining ( Sg = kpg )
Sg = solubility of gas = 0.15 / 100 g/ml
pg. = partial pressure of gas = 760 mmHg = 1 atm
therefore ; K = 1.5 * 10^-3 gm^-1 atm^-1
solubility of gas inside container
Sg = 0.675 * 10^-2 g/ml
solubility of gas during/after dissolution ( amount that remains )
sg = 1.5 * 10^-3 * 0.00038
= 5.7 * 10^-7 g/ml
therefore the percentage remaining
= (5.7 * 10^-7 / 0.675 * 10^-2 ) * 100
= 8.44 * 10^-3 %
The percentage of CO2 remaining in the solution after the soft drink reaches equilibrium is 8.4 × 10⁻³ %
There exists some missing information in the question.
Let us assume that:
the solubility of CO2 gas in the water = 0.15 g/100 mL = 1.5 × 10⁻³ the partial pressure of CO2 = 760 mmHg = 1 atmThen, by applying Henry's law:
[tex]\mathbf{S_g = k P_g}[/tex]
[tex]\mathbf{k = \dfrac{S_g}{P_g}}[/tex]
[tex]\mathbf{k =\dfrac{1.5 \times 10^{-3} g/mL}{1\ atm}}}[/tex]
k = 1.5 × 10⁻³ g/m* atm
The percentage of CO2 that was originally dissolved in the solution is:
[tex]\mathbf{S_g = k P_g}[/tex]
Assuming the partial pressure of CO2 = 4.5 atmThen;
[tex]\mathbf{S_g = 1.5 \times 10^{-3} g/mL* atm \times 4.5 \ atm}[/tex]
[tex]\mathbf{S_g =0.00675 \ g/mL}[/tex]
The partial pressure in the can when the soft drink is being opened is 0.00038 atm.
The solubility of the gas [tex]\mathbf{S_g = 1.5 \times 10^{-3} g/mL* atm \times 0.00038 \ atm}[/tex]
[tex]\mathbf{S_g =5.7 \times 10^7 \ g/mL}[/tex]
Thus, the percentage of CO2 remaining in the solution after the soft drink reaches equilibrium is:
[tex]\mathbf{=\dfrac{5.7\times 10^{-7}}{0.00675} \times 100 \%}[/tex]
[tex]\mathbf{=0.0084 \%}[/tex]
= 8.4 × 10⁻³ %
Learn more about Henry's Law here:
https://brainly.com/question/20377656?referrer=searchResults
What is the percent yield when 1.72 g of H2O2 decomposes and produces 375 mL of O2 gas measured at 42 oC and 1.52 atm
Answer:
87.0%
Explanation:
Step 1: Write the balanced reaction
H₂O₂ ⇒ H₂O + 0.5 O₂
Step 2: Calculate the real yield of oxygen, in grams
We have 375 mL (0.375 L) of O₂ at 42 °C (315 K) and 1.52 atm. First, we will calculate the number of moles using the ideal gas equation.
P × V = n × R × T
n = P × V / R × T
n = 1.52 atm × 0.375 L / (0.0821 atm.L/mol.K) × 315 K = 0.0220 mol
The molar mass of oxygen is 32.00 g/mol.
0.0220 mol × 32.00 g/mol = 0.704 g
Step 3: Calculate the theoretical yield of oxygen, in grams
According to the balanced equation, the mass ratio of H₂O₂ to O₂ is 34.01:16.00.
1.72 g H₂O₂ × 16.00 g O₂/34.01 g H₂O₂ = 0.809 g O₂
Step 4: Calculate the percent yield of oxygen
We will use the following expression.
%yield = real yield / theoretical yield × 100%
%yield = 0.704 g / 0.809 g × 100% = 87.0%
Considering the reaction stoichiometry and the ideal gas law, the percent yield when 1.72 g of H₂O₂ decomposes and produces 375 mL of O₂ gas measured at 42 °C and 1.52 atm is 86.96%.
Theoretical yield of oxygenThe balanced reaction is:
2 H₂O₂ → 2 H₂O + O₂
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
H₂O₂: 2 moleH₂O: 2 mole O₂: 1 molesThe molar mass, this is the amount of mass a substance contains in one mole, of H₂O₂ is 34 [tex]\frac{g}{mole}[/tex]. Then, the amount of moles of H₂O₂ that decomposes when 1.72 grams of H₂O₂ reacts is calculated as:
[tex]1.72 gramsx\frac{1 mole}{34 grams}= 0.0506 moles[/tex]
Then you can apply the following rule of three: if by stoichiometry 2 moles of H₂O₂ produce 1 moles of O₂, 0.0506 moles of H₂O₂ will produce how many moles of O₂?
[tex]amount of moles of O_{2} =\frac{0.0506 moles of H_{2} O_{2} x1 mole of O_{2} }{2 moles of H_{2} O_{2}}[/tex]
amount of moles of O₂= 0.0253 moles
Real yield of oxygenOn the other side, an ideal gas is characterized by three state variables: absolute pressure (P), volume (V), and absolute temperature (T). The relationship between them constitutes the ideal gas law, an equation that relates the three variables if the amount of substance, number of moles n, remains constant and where R is the molar constant of the gases:
P× V = n× R× T
In this case, for O₂ gas you know:
P= 1.52 atmV= 375 mL= 0.375 L (being 1000 mL= 1 L)n= ?R= 0.082 [tex]\frac{atmL}{molK}[/tex]T= 42 °C= 315 °K (being 0°C= 273°K)Replacing:
1.52 atm× 0.375 L = n× 0.082 [tex]\frac{atmL}{molK}[/tex]× 315 K
Solving:
[tex]n=\frac{1.52 atmx 0.375 L}{0.082\frac{atmL}{molK}x 315 K }[/tex]
n= 0.022 moles
Percent yield of oxygenThe percent yield is calculated as
[tex]Percent yield= \frac{real yield}{theoretical yield} x100[/tex]
In this case, for oxygen the percent yield is calculated as
[tex]Percent yield of oxygen= \frac{0.022 moles}{0.0253 moles} x100[/tex]
Percent yield of oxygen= 86.96 %
Finally, the percent yield when 1.72 g of H₂O₂ decomposes and produces 375 mL of O₂ gas measured at 42 °C and 1.52 atm is 86.96%.
Learn more about:
the reaction stoichiometry: brainly.com/question/16487206?referrer=searchResults brainly.com/question/14446695?referrer=searchResults brainly.com/question/11564309?referrer=searchResults brainly.com/question/4025026?referrer=searchResults brainly.com/question/18650135?referrer=searchResultsideal gas lawhttps://brainly.com/question/4147359?referrer=searchResultshow the government support communities affected by xenophobia
Answer:
They tax the citizens and then provide them with relief efforts
Explanation:
Common disease protocol
Is nuclear energy good or bad?
Answer:
It is bad
Explanation:
Is nuclear energy good or bad?
To prepare 250mL of calcium chloride solution with a molar concentration of 1.20mol/L, what mass of calcium chloride would be required?
Answer:
33.30 grams of CaCl2 will be required
Explanation:
Given,
Volume of solution, V= 250 ml
Molarity of solution, M= 1.20 mol/L
Molecular mass of CaCL2, S= 40+(35.5 X 2)= 111
We know,
Required mass, W= SVM/1000
Now,
W = (111 X 250 X 1.20)/1000
= 33300/1000
= 33.30
Therefore, 33.30 grams of Calcium Chloride will be required.
what is a saturated organic compound and unsaturated organic compound?
Answer:
Saturated organic compound has only single bonds between carbon atoms. An important class of saturated compounds are the alkanes. Many saturated compounds have functional groups, e.g., alcohols.
Unsaturated organic compound have double or triple covalent bonds between adjacent carbon atoms. The term "unsaturated" means more hydrogen atoms may be added to the hydrocarbon to make it saturated (i.e. consisting all single bonds).