Answer:
a.) 96000 g
b.) 0.00015 kL
c.) 18.8 L
d.) 36 KM
e.) -39.15 C
f.) 109.4 F
Explanation:
To turn kg to g, multiply the value by 1000
To Turn CL to KL, divide the volume value by 10000
To turn dl to l, divide volume by 10
to turn m to km, multiply meter value by 0.001 or divide by 1000
To convert c to f, multiply the temperature in degrees Celsius by 2, and then add 30
i hope this helps : )
You start with a container that is 8L big and the temperature in the room is 326K.
If the you take the container out in the heat at 352K, how big will it get?
Answer:
The new volume is 8.64 L.
Explanation:
Charles's Law consists of the relationship that exists between the volume and the temperature of a certain quantity of ideal gas, which is maintained at a constant pressure. For a given sum of gas at constant pressure, as the temperature increases, the volume of the gas increases and as the temperature decreases, the volume of the gas decreases.
In summary, Charles's law is a law that says that when the amount of gas and pressure are kept constant, the quotient that exists between the volume and the temperature will always have the same value:
[tex]\frac{V}{T} =k[/tex]
Being an initial state 1 that modifies its conditions until a final state 2, it is fulfilled:
[tex]\frac{V1}{T1} =\frac{V2}{T2}[/tex]
In this case:
V1= 8 LT1= 326 KV2= ?T2= 352 KReplacing:
[tex]\frac{8L}{326 K} =\frac{V2}{352 K}[/tex]
Solving:
[tex]V2=352 K*\frac{8L}{326 K}[/tex]
V2= 8.64 L
The new volume is 8.64 L.
HELP!! 30 POINTS!!!! What does the energy graph look like for this reaction??
C3H8+5O2 -> 3CO2+4H2O
I have the data, I just need to know how to make the graph, please!!
total enthalpy of reactants= -103.85
total enthalpy of products= =-2147.81
=-2043.96 kJ/mol exothermic reaction
Answer:
Bottle Nose Dolphin ummmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm
Explanation:
A 2.50 L sample of butane gas (C4H10), measured at 22.0
oC and 1.20 atm pressure, is combusted completely and
the carbon dioxide gas collected at the same pressure and
temperature. What volume of CO2 is produced?
Answer:
Same i guess hdjekfhkshfjfkr
The resultant volume of the carbon dioxide gas which is produced by the combustion of butane is 14.4L.
How do we calculate the moles of gas?Moles of any gas will be calculated by using the ideal gas equation as:
PV = nRT, where according to qustion for butane gas
P = pressure = 1.20 atm
V = volume = 2.50L
n = moles = ?
R = universal gas constant = 0.082 L.atm / K.mol
T = temperature = 22 degree celsius = 295.15 K
On putting values we get
n = (1.20)(2.50) / (0.082)(295.15) = 0.124 moles
Given chemical equation is:
C₄H₁₀ + 13/2O₂ → 4CO₂ + 5H₂O
From the stoichiometry of the reaction, it is clear that,
1 mole of C₄H₁₀ = produces 4 moles of CO₂
0.124 mole of C₄H₁₀ = produces 4×0.124=0.496 moles of CO₂
Now we calculate the volume for the carbon dioxide gas at the given pressure and temperature as:
V = (0.496)(0.082)(295.15) / (1.20) = 14.4 L
Hence required volume of CO₂ is 14.4 L.
To know more about ideal gas equation, visit the below link:
https://brainly.com/question/24236411
#SPJ2
Which property of sulphuric acid makes it suitable to use as a catalyst for the preparation of esters?
What causes a substance to be hydrophobic?
How could a scientist use a sedimentary rock to provide evidence that the right k cycle is a valid scientific model
Answer:
By closely observing the sedimentary rock and the presence of organic materials and mineral grains in sedimentary rocks
Explanation:
The rock cycle explains how the three types of rock are formed over time from each other.
To use a sedimentary rock to prove that the rock cycle is a valid scientific model is by, closely observing the sedimentary rock. when the sedimentary rock is closed observed the principle of superposition will be seen ( i.e. younger segments deposited on top ), the presence of organic materials and mineral grains that can be found in Igneous or Metamorphic rocks can also be seen and this shows that Sedimentary rocks pass through the rock cycle. hence this proves that the rock cycle is a valid scientific model overtime
. Chalk is made of CaCO 3 . How many molecules are in 5 grams of chalk?
Answer:
20.02 grams of chalk.
Explanation:
helllllppppppp pleaseeeeeee
You use a _____ when you are changing compounds
Answer:
coeffeicent!
Explanation:
this balances equations and also changes the amount of a compound/element present
What number is pointing to the area where magma is less dense due to
heat?
Answer:
I think it's 2
Explanation:
The magma gets so hot, it floats up before cooling and sinking again
Help please see attached screenshot
Answer:
balanced equation of glucose
6CO2 + 6H2O----------C6H12O6 + 6O2
in the presence of sun light.
C + O2 + CO2
What type of reaction occurs when carbon dioxide is formed from carbon and oxygen?
Answer:
combustion reaction.Explanation:
It is a combination reaction as carbon combines with oxygen to form carbon dioxide. It is a combustion reaction as carbon is burnt in the presence of oxygen.
Two tons of water is pumped into a tank 15 ft. High in 5 minutes. Determine the power output of the pump. (Note: One ton is equal to 2,000 lb. And remember to convert the minutes to seconds.)
Answer:
200 lb•ft/s
Explanation:
From the question given above, the following data were obtained:
Force (F) = 2 tons
Time (t) = 5 mins
Height (h) = 15 ft
Power (P) =?
Next, we shall convert 2 tons to pound. This can be obtained as follow:
1 ton = 2000 lb
Therefore,
2 tons = 2 × 2000
2 tons = 4000 lb
Next, we shall convert 5 mins to seconds. This can be obtained as follow:
1 min = 60 s
Therefore,
5 mins = 5 × 60
5 mins = 300 s
Finally, we shall determine the power of the pump. This can be obtained as follow:
Force (F) = 4000 lb
Time (t) = 300 s
Height (h) = 15 ft
Power (P) =?
P = F × h / t
P = 4000 × 15 / 300
P = 60000 / 300
P = 200 lb•ft/s
Thus, the power of the pump is 200 lb•ft/s
Answer:
It's 200 ft-lb/sec
Explanation:
I did it before!
19) Which one of the following statements describes a chemical property of hydrogen gas?
A) Hydrogen gas has a density of 0.00009 g/cm’ at STP.
B) Hydrogen gas burns in air.
C) Hydrogen gas has a boiling point of 20. K at standard pressure.
D) Hydrogen gas is colorless.
what is the advantage of rusting
Answer:
Provide more strength
Explanation:
Rust is metal that has been oxidised . Oxides are usually more fragile and porous than their crystals metal equivalents. Some oxides, such as Aluminum oxide, are useful because they have a thin, strong shell that protects the metal from further corrosion.
what is the pH when h+=0.045 M?
Answer:
pH≈1.35
Explanation:
-log(0.045)≈1.35
a tiny particle in the nucleus of an atom that is about the same size as a proton is a(n)
A. electron
B. neutron
C. solid
D. element
Answer:
b. neutron.
Explanation:
I hope this helps.
Answer:
B. Neutron
Explanation:
Neutrons are about the same size as protons. In addition, nuclei are made up of neutrons and protons. Electrons are located in the electron cloud, which is outside of the nucleus. Solids are hard matter, and an element is a substance that cannot be broken down any further.
Hope this helps!
Oleic acid's melting point is 14°C and it's boiling point is 360°С. What phase is this substance
at room temperature 25°C?*
A. Solid
B. Liquid
C. Gas
D. Impossible to tell
When converting from grams to the must be used as a conversion factor
What can be concluded from the following statements about a property of metats? • Acast-iron skillet on a stove is used to try bacon • A metal spoon left in a pot of soup heating on a stove is too hot to touch - An aluminum playground slide gets hot on a summer day. O A Metals combine with nonmetals.O B. Metals are good insulators. O C Metals conduct electricity D Metals conduct heat.
Answer:
D - metals conduct heat
6.
Ammonia (NH3) acts as a weak base in aqueous solution. What is the acid that reacts with this base
when ammonia is dissolved in water?
(A) NHA
(B) H2O
(C) Oxygen, which is always dissolved in water
(D) None of the above, there are no acids in pure water
Answer:
90% of people marry there 7th grade love. since u have read this, u will be told good news tonight. if u don't pass this on eight comments your worst week starts now this isn't fake. apparently if u copy and paste this on ten comments in the next ten minutes you will have the best day of your life tomorrow. you will either get kissed or asked out in the next 53 minutes someone will say i love you.!Explanation:
Ammonia acts as a weak base in aqueous solution. Water is the acid that reacts with this base when ammonia is dissolved in water.
What is a base?According to the Arrhenius concept, base is defined as a substance which yields hydroxyl ions on dissociation.These ions react with the hydrogen ions of acids to produce salt in an acid-base reaction.
Bases have a pH higher than seven as they yield hydroxyl ions on dissociation.They are soapy in touch and have a bitter taste.According to the Lowry-Bronsted concept, base is defined as a substance which accepts protons .Base react violently with acids to produce salts .Aqueous solutions of bases can be used to conduct electricity .They can also be used as indicators in acid-base titrations.
They are used in the manufacture of soaps,paper, bleaching powder.Calcium hydroxide ,a base is used to clean sulfur dioxide gas while magnesium hydroxide can be used as an antacid to cure acidity.
Learn more about base,here:
https://brainly.com/question/12445440
#SPJ6
Each solute in the table is mixed in a volume of 500 mL of water. Organize the solutions from least conductive to most conductive.
A)
4,2,1,3
B)
4, 1, 2, 3
C)
2, 4, 3,1
D)
1, 3, 4,2
Answer:
b
Explanation:
Answer:
B) 4,1,2,3
Explanation:
Did it on USA Test prep. :)
bromine water can be used to distinguish between these two molecules?? true or false
Answer:i dkd
Explanation:
jsach
Gold can be pounded out to make a foil only a few atoms thick because of
A. Metallic Bonds
B. Ionic Bonds
C. Valence Bonds
D. Covalent Bonds
Answer:
A. Metallic Bonds
Explanation:
Metallic bonding is a type of chemical bonding that arises from the electrostatic attractive force between conduction electrons and positively charged metal ions.
El etanol combustiona con el oxigeno produciendo dióxido de carbono gaseoso y agua: En un proceso se hacen reaccionar 450.2 g de dioxígeno con 998. 2 g de etanol . a) ¿Cuál de los reactivos es el limitante? b) Calcule la masa de dióxido de carbono que se formará c) ¿ Cuanto del reactivo en exceso quedará sin reaccionar?
Answer:
uh oh stinky uh oh stinky
A solution's hydrogen ion concentration is 1 x 10-5M.
What is the pH?
Answer:
pH=5
Explanation:
-log(1 x 10-5)=5
How many atoms are in 25.0 moles of calcium (Ca)?
Answer:
1.8066e+24 is the answer
Question 15 (3 points)
How are cations and anions related to metals and nonmetals?
Answer:
uff mere dil ma ture kali chadiya ha uff tumi apne buni ha
Answer:
Cations (positively-charged ions) and anions (negatively-charged ions) are formed when a metal loses electrons, and a nonmetal gains those electrons. ... And all of them form an anion with a single negative charge.
What is needed for our cells to get energy from our food?
Answer:
cellular respiration is needed for our cells to get energy from our food.
Explanation:
Through the process of cellular respiration, the energy in food is converted into energy that can be used by the body's cells. During cellular respiration, glucose and oxygen are converted into carbon dioxide and water, and the energy is transferred to ATP.
Need help on this question asap please
Answer:
The correct answer is - 14.
Explanation:
In the given molecular formula of the aluminum sulphite which is Al2(SO3)3, this molecular formula there different type of elements are bonded together to form this compound each element has a specific number of atoms present. This compound has three elements that are aluminum, sulfur, and oxygen and the atoms are present are:
Al = 2 atoms represented by subscript
S = 3 atoms represented as whole subscripts of sulfite
O = 9 atoms 3 inside bracket and 3 outside of bracket that multiplies.
Thus, total number of atoms are 2+3+9 = 14