The general approach for proving convergence using the comparison test and provide guidance on approximating the sum of a series within a given error bound.
(a) Proving Convergence Using the Comparison Test:
To determine the convergence of a series, we can compare it with another known series. In this case, we need to find a geometric series that can be used for comparison.
Let's examine the given series: Σ(a - [(a^(n+1))/(3^(2n))]) from n = 1 to infinity.
We can notice that the term (a^(n+1))/(3^(2n)) is decreasing as n increases. To find a suitable geometric series for comparison, we can simplify this term:
(a^(n+1))/(3^(2n)) = (a/3^2) * [(a/3^2)^(n)].
Now, we can see that the ratio between consecutive terms is (a/3^2). Thus, we can write the geometric series as:
Σ[(a/3^2)^(n)] from n = 1 to infinity.
For this geometric series, the common ratio is |a/3^2|, which must be less than 1 for convergence. Therefore, the condition for convergence is:
|a/3^2| < 1.
Simplifying, we have:
|a|/9 < 1,
|a| < 9.
Thus, we can conclude that the series Σ(a - [(a^(n+1))/(3^(2n))]) converges when |a| < 9, as it can be compared with the convergent geometric series Σ[(a/3^2)^(n)].
(b) Approximating the Sum of the Series:
To approximate the sum of the series Σ(a - [(a^(n+1))/(3^(2n))]) using the sum of the first k terms, we need to find the error bound, denoted as R₁.
The error R₁ is given by:
R₁ = Σ(a - [(a^(n+1))/(3^(2n))]) - Σ(a - [(a^(n+1))/(3^(2n))]) from n = 1 to k.
To find an upper bound for R₁, we can consider the term Σ(b) from n = k+1 to infinity, where b represents a convergent geometric series.
Using the formula for the sum of a geometric series, the sum of Σ(b) from n = k+1 to infinity is given by:
Σ(b) = b/(1 - r),
where b represents the first term and r is the common ratio of the geometric series.
In this case, since we are given the sum of the first k terms, the value of b is the sum of the first k terms of the series Σ(b).
Therefore, the upper bound for R₁ is Σ(b) = b/(1 - r).
(c) Determining the Number of Terms for a Given Error Bound:
To determine the number of terms required to approximate the series accurately to within a specified error bound, we need to solve the inequality:
Σ(b) < 0.0003,
where Σ(b) is the upper bound for R₁ obtained in part (b).
By substituting the expression for Σ(b), we can solve for the value of k that satisfies the inequality.
learn more about convergence here: brainly.com/question/29258536
#SPJ11
*differential equations* *will like if work is shown correctly and
promptly
13. Find a particular solution of the linear system given. x'=3x-y y'=5x-3y where x(0) = 1, y(0) = -1
the particular solution of the given linear system of differential equations with the given initial conditions x(0) = 1, y(0) = -1 is,
x = (2/3) e^(-5t) + (2/3) e^(3t)
y = (8/5) e^(-5t) - (4/5) e^(3t)
Given the linear system is,
x' = 3x - y ------(1)
y' = 5x - 3y ------(2)
Using initial conditions x(0) = 1, y(0) = -1
Now we solve for x in equation (1),x' = 3x - y
[tex]dx/dt = 3x - y[/tex]
[tex]dx/(3x - y) = dt.[/tex]
The left-hand side is the derivative of the logarithm of the absolute value of the denominator, while the right-hand side is the integration of a constant:1/3 ln|3x - y| = t + c1. ------------(3)
Using the initial condition x(0) = 1,
x(0) = 1 = (1/3) ln|3(1) - (-1)| + c1c1
= 1/3 ln(4) + k1c1
= ln(4^(1/3)k1)
Now, substituting the value of c1 in equation (3),
1/3 ln|3x - y| = t + 1/3 ln(4) + k1
Taking exponentials,
|3x - y| = e^3 (4) e^3 (k1) e^3t
3x - y = ± 4e^3 e^3t e^3(k1) ----- (4)
Now, we solve for y in equation (2),y' = 5x - 3ydy/dt = 5x - 3ydy/(5x - 3y) = dt
The left-hand side is the derivative of the logarithm of the absolute value of the denominator, while the right-hand side is the integration of a constant:1/5 ln|5x - 3y| = t + c2. -------------(5)Using the initial condition y(0) = -1,
y(0) = -1
= (1/5) ln|
5(1) - 3(-1)| + c2
c2 = -1/5 ln(8) + k2
c2 = ln(8^(-1/5)k2)
Now, substituting the value of c2 in equation (5),
1/5 ln|5x - 3y| = t - 1/5 ln(8) + k2
Taking exponentials,
|5x - 3y| = e^(-5) (8) e^(-5k2) e^5t
5x - 3y = ± 8e^(-5) e^(-5t) e^(-5k2) -------------- (6)
Equations (4) and (6) are a system of linear equations in x and y.
Multiplying equation (4) by 3 and equation (6) by -1,
we get: 9x - 3y = ± 12e^3 e^3t e^3(k1) ----- (7)
3y - 5x = ± 8e^(-5) e^(-5t) e^(-5k2) ------------ (8)
Adding equations (7) and (8),
12x = ± 12e^3 e^3t e^3(k1) ± 8e^(-5) e^(-5t) e^(-5k2)
Hence, x = ± e^3t (e^(3k1)/2) ± 2/3 e^(-5t) (e^(-5k2))
Multiplying equation (4) by 5 and equation (6) by 3, we get:
15x - 5y = ± 20e^3 e^3t e^3(k1) ----- (9)
9y - 15x = ± 24e^(-5) e^(-5t) e^(-5k2) ------------ (10)
Adding equations (9) and (10),
-10y = ± 20e^3 e^3t e^3(k1) ± 24e^(-5) e^(-5t) e^(-5k2)
Therefore, y = ± 2e^3t (e^(3k1)/2) ± 12/5 e^(-5t) (e^(-5k2))
Thus, the general solution of the given linear system of differential equations is,
x = ± e^3t (e^(3k1)/2) ± 2/3 e^(-5t) (e^(-5k2))
y = ± 2e^3t (e^(3k1)/2) ± 12/5 e^(-5t) (e^(-5k2))
Now, using the given initial conditions x(0) = 1, y(0) = -1,
we have,1 = ± (e^(3k1)/2) + 2/3 (-1)
= ± (e^(3k1)/2) + 12/5
Solving the above two equations simultaneously, we get,
k1 = ln(4/3),
k2 = -ln(5/3)
Hence, the particular solution of the given linear system of differential equations with the given initial conditions x(0) = 1,
y(0) = -1 is,
x = (2/3) e^(-5t) + (2/3) e^(3t)
y = (8/5) e^(-5t) - (4/5) e^(3t)
To learn more about Linear visit;
https://brainly.com/question/31510530
#SPJ11
Find the characteristic polynomial of the matrix 4 50 A = 0-42 -1-50 p(x) x^3+6x+30
Given the matrix `A = [ 4 50 ; 0 -42 -1 ; -50 ]`. The characteristic polynomial of the given matrix A is `p(x) = x^3 + 6x + 30`.
We have to find the characteristic polynomial of this matrix. We know that the characteristic polynomial of a matrix is given by the equation :'p (x) = det(xI - A)`, where I is the identity matrix of the same order as A. To find the determinant of `xI - A`, we need to subtract A from `xI`. The matrix `xI` is obtained by multiplying the diagonal of A by x. Therefore, `xI - A` is given by:`xI - A = [ x - 4 -50 ; 0 x + 42 1 ; 50 -1 x + 50 ]`. Taking the determinant of `xI - A`, we get: `det(xI - A) = x^3 + 6x + 30`. Hence, the characteristic polynomial of the given matrix A is `p(x) = x^3 + 6x + 30`. The characteristic polynomial of the given matrix A is `p(x) = x^3 + 6x + 30`. The determinant of a matrix is a number that can be computed from the elements of the matrix. It is a useful tool in linear algebra and has many applications in various fields such as physics, engineering, and economics. The determinant of a matrix provides information about the properties of the matrix, such as its invertibility, rank, and eigenvalues. The characteristic polynomial of a matrix is obtained by taking the determinant of `xI - A`, where I is the identity matrix of the same order as A. The roots of the characteristic polynomial are the eigenvalues of the matrix.
The eigenvalues of a matrix are important in many applications, such as in solving differential equations, and optimization problems, and in physics, for example, in quantum mechanics. The characteristic polynomial of the given matrix A is `p(x) = x^3 + 6x + 30`. The determinant of a matrix is a useful tool in linear algebra and has many applications in various fields. The roots of the characteristic polynomial are the eigenvalues of the matrix and are important in many applications.
To know more about matrix visit:
brainly.com/question/28180105
#SPJ11
Let g be a reflection in the x-axis, followed by a
translation 2 units right of the graph of
f(x) = 5³√√x-1.
ag(x)=5²√√x+1
B. g(x)=-5³√√x+1
& g(x)=5²√√-x-3
₂ g(x) = -5²√√x-3
Answer:
I think the answer is b but not so sure
If f(x) = (5x² - 8) (7x + 3), find:
f'(x) =
f'(5) =
Question Help: Post to forum Get a similar question You can retry this question below
The derivative of f(x) can be found using the product rule: f'(x) = (5x² - 8)(7) + (5x² - 8)(3x).
To find the derivative of f(x), we use the product rule, which states that the derivative of a product of two functions is the derivative of the first function times the second function plus the first function times the derivative of the second
function.
Applying the product rule to f(x) = (5x² - 8)(7x + 3), we differentiate the first term (5x² - 8) with respect to x, giving us 10x, and multiply it by the second term (7x + 3). Then we add the first term (5x² - 8) multiplied by the derivative of the second term, which is 7
Simplifying the expression, we ge
t f'(x) = (5x² - 8)(7) + (5x² - 8)(3x) = 35x² - 56 + 15x³ - 24x.
To find f'(5), we substitute x = 5 into the derivative expression. Evaluating the expression, we have f'(5) = 35(5)² - 56 + 15(5)³ - 24(5) = 175 - 56 + 1875 - 120 = 1874.
Therefore, f'(x) = 35x² - 56 + 15x³ - 24x, and f'(5) = 1874.
To learn more about
x
brainly.com/question/30171899
#SPJ11
Use the definition of the logarithmic function to find x. (a) log1024 2 = x
The logarithmic function is defined as follows:Let b be a positive real number that is not equal to 1, and let x be a positive real number. Then log_b x
= y if and only if b^y
= x.In this case, we have the equation log_10 24
= x.We want to use the definition of the logarithmic function to find x.
According to the definition, if log_b x
= y, then b^y
= x.Applying this to our equation, we get:10^x
= 24We can solve for x by taking the logarithm of both sides with base [tex]10:log_10 10^x[/tex]
=[tex]log_10 24x[/tex]
= log_10 24Since log_10 24 is a decimal number that is greater than 1, x will also be a decimal number greater than 1. Therefore, the solution to the equation[tex]log_10 24[/tex]
= x is:x
≈ 1.380211241During the examination, make sure to show your work to demonstrate your approach and arrive at a final answer.
To know more about positive real number visit:
https://brainly.com/question/14806899
#SPJ11
Solve f(t) + [*e*(1 – t)? de = 1 using Laplace Transformations –c
The solution of the given differential equation f(t) + [*e*(1 – t)]? = 1 using Laplace transformation is
[tex]f(t) = L^{-1}{\{1/s + L{e^{(t-1)}}}\}[/tex]
The Laplace transformation of given equation is:
[tex]L{f(t)} + L{e^{(t-1)}} = L\{1\}[/tex]
[tex]L{f(t)} + e^{(-s)}L{e^t} = 1/s[/tex]
[tex]L\{1\} + e^{(-s)}L{e^t} = 1/s + L{e^{(t-1)}[/tex]
This is Laplace transformation of given equation.
Now, we need to apply inverse Laplace transformation to obtain f(t).
Explanation: On the left side of the Laplace transform equation, we have L{f(t)}.
On the right side of the Laplace transform equation, we have L{1}, L{e^(t-1)}, and 1/s.
To solve the given equation, we need to apply Laplace transform on each term of the equation to obtain an equation in the Laplace domain.
After that, we need to perform some algebraic operations to get the equation in a suitable form for inverse Laplace transform.
Then, we apply inverse Laplace transform on the obtained equation in the Laplace domain to get the solution of the given differential equation.
Hence, we have obtained the solution of given differential equation by applying Laplace transformation.
The solution of the given differential equation f(t) + [*e*(1 – t)]? = 1 using Laplace transformation is:
[tex]f(t) = L^{-1}{\{1/s + L{e^{(t-1)}}}\}[/tex]
To know more about differential visit
https://brainly.com/question/12225109
#SPJ11
Consider a sequence of three coin flips like in the previous question. Let X = X1 + X2 + X3 be the binomial r.v. which counts the number of "heads" in a sequence of three coin flips. Determine the following:
• P(X=1)
• P(X ≤1)
• P(X #1)
The probability of getting one head is 3/8, getting one or fewer heads is 1/2, and getting more than one head is also 1/2.
The probability of getting one head and two tails when flipping a coin three times is 3/8.
The binomial r.v. is X = X1 + X2 + X3, which counts the number of heads in a sequence of three coin flips.
When counting the number of possible outcomes with one head and two tails, we use the formula (3 choose 1), since we have three possible outcomes and one must be a head.
Therefore,
P(X=1) = (3 choose 1)
(1/2)³ =3/8.
P(X ≤ 1) = P(X=0) + P(X=1)
= (3 choose 0)(1/2)³ + (3 choose 1)(1/2)³
= 1/8 + 3/8
= 1/2.
The probability of getting one head is 3/8, getting one or fewer heads is 1/2, and getting more than one head is also 1/2.
To know more about probability visit:
brainly.com/question/31828911
#SPJ11
19 Question 20: 4 Marks ។ Find an expression for a square matrix A satisfying A² = In, where In is the n x n identity matrix. Give 3 examples for the case n = 3. 20 Question 21: 4 Marks Give an example of 2 x 2 matrix with non-zero entries that has no inverse.
To find an expression for a square matrix A satisfying A² = In, where In is the n x n identity matrix, we can consider a diagonal matrix D with the square root of the diagonal entries equal to 1 or -1. Let's denote the diagonal matrix D as D = diag(d1, d2, ..., dn), where di = ±1 for i = 1 to n. Then, the matrix A can be defined as A = D.
Examples for n = 3:
For the case n = 3, we can have the following examples:
A = diag(1, 1, 1)
A = diag(-1, -1, -1)
A = diag(1, -1, 1)
Question 21:
To give an example of a 2 x 2 matrix with non-zero entries that has no inverse, we can consider the matrix A as follows:
A = [[1, 1],
[2, 2]]
To check if A has an inverse, we can calculate its determinant. If the determinant is zero, then the matrix does not have an inverse. Calculating the determinant of A, we have:
det(A) = (12) - (12) = 0
Since the determinant is zero, the matrix A does not have an inverse.
To learn more about expression visit: brainly.com/question/29176690
#SPJ11
A ball is dropped from a height of 24 feet. On each bounce, the ball returns to of its pervious height. What will the maximum height of the ball be after the fourth bounce? How far the ball will travel after four bounces? a. b. c. How far does the ball travel before it comes to rest?
The ball is dropped from a height of 24 feet and on each bounce, the ball returns to half of its previous height. Now, let's find out what the maximum height of the ball will be after the fourth bounce.
To start with, the ball is dropped from a height of 24 feet. After the first bounce, the ball will rise to a height of 12 feet, then after the second bounce, it will rise to a height of 6 feet, after the third bounce, it will rise to a height of 3 feet, and after the fourth bounce, it will rise to a height of 1.5 feet. Therefore, the maximum height of the ball after the fourth bounce is 1.5 feet.
The ball travels 72 feet after four bounces. To find the distance that the ball travels after four bounces, we can simply add up the distance traveled by the ball on each bounce. On the first bounce, the ball travels a distance of 24 feet.
On the second bounce, the ball travels a distance of 24 feet (because it covers the same distance twice, once on the way up and once on the way down).
On the third bounce, the ball travels a distance of 24/2 = 12 feet.
And on the fourth bounce, the ball travels a distance of 12/2 = 6 feet.
The total distance that the ball travels after four bounces is 24 + 24 + 12 + 6 = 66 feet. The ball will continue bouncing indefinitely, but it will never bounce higher than 1.5 feet. The distance that the ball travels before it comes to rest is infinite, as the ball will continue bouncing forever (even if the bounces get progressively smaller). Therefore, we can't calculate a finite distance that the ball travels before it comes to rest.
To know more about maximum height visit:
brainly.com/question/1374993
#SPJ11
An archaeological dig is marked with a rectangular grid where each square is 5 feet on a side. An important artifact is discovered at the point corresponding to (-50, 25) on the grid. How far is this from the control tent, which is at the point (20, 30)?
The distance between the artifact point (-50, 25) and the control tent point (20, 30) is approximately 70.14 feet.
To calculate the distance between two points, we can use the distance formula, which is derived from the Pythagorean theorem.
In this case:
Artifact point: (-50, 25)
Control tent point: (20, 30)
Let's label the coordinates of the artifact point as (x₁, y₁) = (-50, 25) and the coordinates of the control tent point as (x₂, y₂) = (20, 30).
The distance between the two points is given by the formula:
d = √((x₂ - x₁)² + (y₂ - y₁)²)
Substituting the values:
d = √((20 - (-50))² + (30 - 25)²)
d = √((70)² + (5)²)
d = √(4900 + 25)
d = √4925
d ≈ 70.14 feet
Learn more about distance here:
https://brainly.com/question/30395212
#SPJ11
Compute the flux integral SF. dA in two ways, directly and using the Divergence Theorem. S is the surface of the box with faces x = 1, x = 3, y = 0, y = 1, z = 0, z = 3, closed and oriented outward, and
F=x2i+5y2j+z2k
.
a. To compute the flux integral SF.dA directly, we need to evaluate the surface integral over the surface S of the vector field F = x²i + 5y²j + z²k, dotted with the outward-pointing normal vector dA.
b. The surface S is the closed box with faces x = 1, x = 3, y = 0, y = 1, z = 0, and z = 3. Since the surface is closed and oriented outward, we can break it down into six individual surfaces: four rectangular faces and two square faces. c. For each face, we calculate the dot product of the vector field F with the outward-pointing normal vector dA. The magnitude of the normal vector dA is equal to the area of the corresponding face. d. Evaluating the integral for each face and summing up the results will give us the flux integral SF.dA directly.
e. On the other hand, we can also compute the flux integral using the Divergence Theorem, which relates the flux of a vector field across a closed surface to the divergence of the field over the volume enclosed by the surface. f. The divergence of F can be calculated as div(F) = ∇ · F = ∂(x²)/∂x + ∂(5y²)/∂y + ∂(z²)/∂z = 2x + 10y + 2z. g. Using the Divergence Theorem, the flux integral SF.dA is equal to the triple integral of the divergence of F over the volume enclosed by the surface S. h. Since the surface S is a closed box with fixed limits of integration, we can evaluate the triple integral directly to obtain the same result as the direct computation.
Note: The detailed calculation of the flux integral using both methods and the evaluation of each individual surface integral cannot be shown within the given character limit. However, by following the steps mentioned above and applying appropriate integration techniques, you can find the value of the flux integral SF.dA for the given vector field F and closed surface S.
To learn more about flux integral click here:
brainly.com/question/31991100
#SPJ11
8: Find (without using a calculator) the absolute minimum and absolute maximum values of the function on the given interval. Show all your work. f(x) = x³ (4-x) on [-1,4].
The absolute minimum value of the function f(x) = x³ (4-x) on the interval [-1, 4] is -64, and the absolute maximum value is 64.
To find the absolute minimum and maximum values of the function f(x) = x³ (4-x) on the interval [-1, 4], we need to evaluate the function at its critical points and endpoints.
First, we find the critical points by setting the derivative of the function equal to zero: f'(x) = 3x² - 4x² + 12x - 4 = 0. Simplifying this equation, we get 8x² - 12x + 4 = 0. Solving for x, we find two critical points: x = 1/2 and x = 1.
Next, we evaluate the function at the critical points and the endpoints of the interval [-1, 4]. We find f(-1) = -3, f(1/2) = 9/16, f(1) = 0, and f(4) = 0.
Comparing these values, we see that the absolute minimum value of the function is -64 at x = -1, and the absolute maximum value is 64 at x = 4.
To learn more about absolute maximum click here: brainly.com/question/28767824
#SPJ11
1. (5 points) rewrite the integral z 1 0 z 3−3x 0 z 9−y 2 0 f(x, y, z) dzdydx in the order of dx dy dz.
Given integral is z 1 0 z 3−3x 0 z 9−y 2 0 f(x, y, z) dzdydx.We have to rewrite this integral in the order of dx dy dz.So, by finding the limits for x, y, and z, we can rewrite the given integral in the order of dx dy dz as ∫(from 0 to 9)∫(from 0 to √(9-y²))∫(from 0 to 3-((1/3)*x))f(x,y,z)dzdydx.
We have given, z 1 0 z 3−3x 0 z 9−y 2 0 f(x, y, z) dzdydxWe have to rewrite this integral in the order of dx dy dz.So, we can solve this problem using the below steps :
Step 1: First of all, find out the limits for x, y and z and write them accordingly for x, y and z in the order of dx dy dz.
Step 2: Rewrite the given integral in the order of dx dy dz.
Step 3: Solve the above integral by using the limits for x, y and z.
Using the above steps, we can solve this problem.
Given integral is z 1 0 z 3−3x 0 z 9−y 2 0 f(x, y, z) dzdydx. Let's rewrite this integral in the order of dx dy dz by finding the limits of x, y, and z in the given integral.
So, z 1 0 z 3−3x 0 z 9−y 2 0 f(x, y, z) dzdydx = ∫(from 0 to 9)∫(from 0 to √(9-y²))∫(from 0 to 3-((1/3)*x))f(x,y,z)dzdydx
Summary:Given integral is z 1 0 z 3−3x 0 z 9−y 2 0 f(x, y, z) dzdydx.We have to rewrite this integral in the order of dx dy dz.So, by finding the limits for x, y, and z, we can rewrite the given integral in the order of dx dy dz as ∫(from 0 to 9)∫(from 0 to √(9-y²))∫(from 0 to 3-((1/3)*x))f(x,y,z)dzdydx.
Learn more about integral click here:
https://brainly.com/question/3009
#SPJ11
1) A researcher has found that, 30% of the cats in a particular animal shelter have a virus infection. They have selected a random sample of 25 cats from this population in this shelter. X is the number of infected cats in these 25 cats. a) Assuming independence, how is X distributed? In other words, what is the probability distribution of X? Specify the parameter values. zebinev 100 doig art al Vid b) Find the following probabilities:
In a particular animal shelter, 30% of the cats have been found to have a virus infection. A random sample of 25 cats was selected from this population in the shelter to investigate the number of infected cats, denoted as X.
a) Assuming independence, X follows a binomial distribution.
The probability distribution of X is given by:
P(X = k) = C(n, k) * p^k * (1 - p)^(n - k)
Where:
- n is the number of trials (sample size) = 25 (number of cats in the sample)
- k is the number of successes (number of infected cats)
- p is the probability of success (proportion of infected cats in the population) = 0.30 (30% infected)
b) To find the following probabilities, we can use the binomial distribution formula:
1) P(X = 0): The probability that none of the cats in the sample are infected.
P(X = 0) = C(25, 0) * 0.30^0 * (1 - 0.30)^(25 - 0)
2) P(X ≥ 3): The probability that three or more cats in the sample are infected.
P(X ≥ 3) = P(X = 3) + P(X = 4) + ... + P(X = 25)
3) P(X < 5): The probability that fewer than five cats in the sample are infected.
P(X < 5) = P(X = 0) + P(X = 1) + P(X = 2) + P(X = 3) + P(X = 4)
To calculate these probabilities, we need to substitute the appropriate values into the binomial distribution formula and perform the calculations.
To know more about virus infection,
https://brainly.com/question/29770500#
#SPJ11
Answer the following questions 1- Find a deterministic finite machine that accepts all the strings on (0,1), except those containing the substring 11
The deterministic finite machine that accepts all the strings on (0,1) is found.
In order to find a deterministic finite machine that accepts all the strings on (0,1), except those containing the substring 11, we need to follow the following steps:
Step 1: First, we need to construct the transition diagram of the machine for this language L over the alphabet {0,1}.
Step 2: In the next step, we have to number all states, where q0 will be the initial state, and we have to put an accepting state label on all accepting states.
Step 3: In the third step, we need to write down the transition function.
Step 4: Finally, we have to define the machine formally.
So, the deterministic finite machine that accepts all the strings on (0,1), except those containing the substring 11 is:
Step 1: The transition diagram of the machine for this language L over the alphabet {0,1} is:
Step 2: Number all states, where q0 will be the initial state, and put an accepting state label on all accepting states.
Step 3: The transition function is given as:
δ (q0, 1) = q0
δ (q0, 0) = q0
δ (q1, 1) = q0
δ (q1, 0) = q2
δ (q2, 1) = q0
δ (q2, 0) = q3
δ (q3, 1) = q0
δ (q3, 0) = q2
Step 4: The machine can be defined formally as:
M = (Q, Σ, δ, q0, F) where
Q = {q0, q1, q2, q3}
Σ = {0, 1}q0
= q0F
= {q0, q2, q3}
δ : Q × Σ → Q
Know more about the transition function
https://brainly.com/question/17210858
#SPJ11
25. If x + y < x which of the following must be true?
The inequality x + y < x implies that y < 0. This is because if we subtract x from both sides, we get y < 0, since x - x = 0 and we need the inequality to hold true. the answer is that y is negative.
Therefore, if x + y < x, it must be true that y is negative. Another way to see this is by realizing that adding a negative number to x cannot make it larger than it was before.
Since y is negative, adding it to x will make x smaller, which is why the inequality holds true.
Thus, the only statement that must be true is that y is negative. The other statements are not necessarily true; for example, x could be negative, positive, or zero, and y could be any negative number.
To learn more about : inequality
https://brainly.com/question/30238989
#SPJ8
Let U be the universal set, where: U = { 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 , 11 , 12 , 13 , 14 , 15 , 16 , 17 } Let sets A , B , and C be subsets of U , where:
A = { 1 , 3 , 4 , 7 , 8 , 11 , 14 }
B = { 3 , 8 , 9 , 11 , 12 }
C = { 9 , 13 , 14 , 17 }
Find the following:
LIST the elements in the set Bc∪∅Bc∪∅ :
Bc∪∅Bc∪∅ = { }
Enter the elements as a list, separated by commas. If the result is the empty set, enter DNE
LIST the elements in the set A∩BA∩B :
A∩BA∩B = { }
Enter the elements as a list, separated by commas. If the result is the empty set, enter DNE
LIST the elements in the set Ac∪BAc∪B :
Ac∪BAc∪B = { }
Enter the elements as a list, separated by commas. If the result is the empty set, enter DNE
LIST the elements in the set (A∩C)∩Bc(A∩C)∩Bc :
(A∩C)∩Bc(A∩C)∩Bc = { }
Enter the elements as a list, separated by commas. If the result is the empty set, enter DNE
You may want to draw a Venn Diagram to help answer this question.
Main Answer: If A ∩ B = { } , then the two sets are disjoint sets.
Supporting Answer: Two sets are called disjoint sets if they have no common elements. If the intersection of two sets A and B is null, it means they have no common elements. Mathematically, A ∩ B = { } implies that A and B are disjoint sets. The intersection of two sets, A and B, is the set of all elements that are common to both sets A and B. In other words, the intersection of A and B is the set containing all the elements that are in A and B. If A ∩ B is null, it means there are no common elements in A and B, and thus A and B are disjoint sets.
Know more about disjoint sets here:
https://brainly.com/question/28165517
#SPJ11
DO ANY TWO PARTS OF THIS PROBLEM. ) (A) SHOW 2 2 dx 2 Position day x² + sin (3x) (B Give AN EXAMPLE OF A A Function f: TR - TR Two WHERE f is is ONLY CONTijous POINTS in R. EXPLAIN. EXAMPLE OF A FUNCTION WHERE f is is NOT int EGRABLE C) GIVE AN f: R -> IR
(A)Two parts of this problem show 22 dx2 positions of the day x² + sin (3x).
(B)Example of a function where f is only continuous at points in R is f(x) = sin (1 / x) x ≠ 0 and f(x) = 0 x = 0.
(A)The given equation is 22 dx2 position of the day x² + sin (3x).
The given equation can be represented as follows:∫(2x² + sin 3x) dx
The integration of x² is (x^3/3) and the integration of sin 3x is (-cos 3x / 3).
∫(2x² + sin 3x) dx = 2x³ / 3 - cos 3x / 3
The two parts of this problem show 2 2 dx 2 positions of the day x² + sin (3x).
(B)The example of a function where f is only continuous at points in R is f(x) = sin (1 / x) x ≠ 0 and f(x) = 0 x = 0. This is because sin (1 / x) oscillates infinitely as x approaches 0.
Therefore, f(x) = sin (1 / x) is not continuous at 0, but it is continuous at all other points in R where x ≠ 0. However, it is not integrable over any interval that contains 0.
(C)One example of f: R → IR is f(x) = 2x + 1.
Here, R represents the set of all real numbers, and IR represents the set of all real numbers.
To know more about function visit :-
https://brainly.com/question/30721594
#SPJ11
Convert the capacity of 5 liters
Based on the above, the capacity of a 5-liter tin is about 500 cm³.
What is the capacity?To be able to convert the capacity of a 5-liter tin to its volume in cm³, One need to use the conversion factor that is, 1 liter is equivalent to 100 cm³.
So, to be able to calculate the volume of a 5-liter tin in cm³, one have to multiply the capacity (5 liters) by the conversion factor (100 cm³/liter):
Volume in cm³ = 5 liters x 1000 cm³/liter
= 500 cm³
Therefore, the capacity of a 5-liter tin is about 500 cm³.
Learn more about capacity from
https://brainly.com/question/14645317
#SPJ1
See full text below
Convert the capacity of a 5 litre tin to its volume in cm³.1litre is equivalent to 100cm³
Evaluate the indefinite integral. (Use C for the constant of int J cos² (t) 4 + tan(t)
The indefinite integral of
cos²(t) / (4 + tan(t))
can be evaluated using the substitution method. Let u = tan(t), then du = sec²(t) dt. Substituting these values and simplifying the integral will lead to the solution.
To evaluate the indefinite integral
∫ cos²(t) / (4 + tan(t))
dt, we can use the substitution method. Let's substitute u = tan(t).
First, we need to find the derivative of u with respect to t. Taking the derivative of u = tan(t) with respect to t gives du = sec²(t) dt.
Now, we substitute these values into the integral. The numerator, cos²(t), can be rewritten using the identity cos²(t) = 1 - sin²(t). Additionally, we substitute du for sec²(t) dt:
∫ (1 - sin²(t)) / (4 + u) du.
Next, we simplify the integral:
∫ (1 - sin²(t)) / (4 + tan(t)) dt = ∫ (1 - sin²(t)) / (4 + u) du.
Using the trigonometric identity 1 - sin²(t) = cos²(t), the integral becomes:
∫ cos²(t) / (4 + u) du.
Now, we can integrate with respect to u:
∫ cos²(t) / (4 + u) du = ∫ cos²(t) / (4 + tan(t)) du.
The integral of cos²(t) / (4 + tan(t)) with respect to u can be evaluated using various methods, such as partial fractions or trigonometric identities. However, without further information or constraints, it is not possible to provide a specific numerical value or simplified expression for the integral.
In summary, the indefinite integral of cos²(t) / (4 + tan(t)) can be evaluated using the substitution method. The resulting integral can be simplified further depending on the chosen method of integration, but without additional information, a specific solution cannot be provided.
To learn more about
Integral
brainly.com/question/31059545
#SPJ11
Use Euler's method with step size 0.5 to compute the approximate y-values y1≈y(1.5), y2≈y(2), y3≈y(2.5), and y4≈y(3) of the solution of the initial-value problem
y′=1−3x+4y, y(1)=−1.
y1= ,
y2= ,
y3= ,
y4= .
Using Euler's method with a step size of 0.5, we need to compute the approximate y-values y1 ≈ y(1.5), y2 ≈ y(2), y3 ≈ y(2.5), and y4 ≈ y(3) for the initial-value problem y' = 1 - 3x + 4y, y(1) = -1.
To use Euler's method, we start with the initial condition y(1) = -1 and approximate the derivative at each step. With a step size of 0.5, we can calculate the approximate y-values as follows:
1. For y1 ≈ y(1.5):
Using the initial condition, we have x0 = 1, y0 = -1. Applying Euler's method, we get:
y1 ≈ y0 + h * f(x0, y0) = -1 + 0.5 * (1 - 3(1) + 4(-1)) = -2.5.
2. For y2 ≈ y(2):
Using y1 ≈ -2.5 as the initial value, we have x1 = 1.5, y1 = -2.5. Applying Euler's method, we get:
y2 ≈ y1 + h * f(x1, y1) = -2.5 + 0.5 * (1 - 3(1.5) + 4(-2.5)) = -4.
3. For y3 ≈ y(2.5):
Using y2 ≈ -4 as the initial value, we have x2 = 2, y2 = -4. Applying Euler's method, we get:
y3 ≈ y2 + h * f(x2, y2) = -4 + 0.5 * (1 - 3(2) + 4(-4)) = -5.5.
4. For y4 ≈ y(3):
Using y3 ≈ -5.5 as the initial value, we have x3 = 2.5, y3 = -5.5. Applying Euler's method, we get:
y4 ≈ y3 + h * f(x3, y3) = -5.5 + 0.5 * (1 - 3(2.5) + 4(-5.5)) = -7.
Therefore, the approximate y-values are y1 ≈ -2.5, y2 ≈ -4, y3 ≈ -5.5, and y4 ≈ -7. These values are obtained by iteratively applying Euler's method with the given step size and initial condition.
To learn more about Euler's method click here: brainly.com/question/30699690
#SPJ11
Consider the region bounded by y = x², y = 49, and the y-axis, for x ≥ 0. Find the volume of the solid whose base is the region and whose cross-sections perpendicular to the x-axis are semicircles
The volume can be expressed as V = ∫(0 to b) [(1/2) * π * [(49 - x^2)/2]^2] dx. Evaluating this integral will give the final volume of the solid.
To calculate the volume, we divide the region into infinitesimally thin strips perpendicular to the x-axis. Each strip has a height equal to the difference between the upper and lower boundaries, which is 49 - x^2. The cross-sectional area of each strip is given by A = (1/2) * π * r^2, where r is the radius of the semicircle.
Since the radius of the semicircle is half the width of the strip, the radius can be expressed as r = (49 - x^2)/2. Therefore, the area of each cross-section is A = (1/2) * π * [(49 - x^2)/2]^2.
To find the volume, we integrate the area of each cross-section with respect to x over the given range of x = 0 to x = b, where b is the x-coordinate where the parabola y = x^2 intersects the line y = 49.
The volume can be expressed as V = ∫(0 to b) [(1/2) * π * [(49 - x^2)/2]^2] dx. Evaluating this integral will give the final volume of the solid with semicircular cross-sections perpendicular to the x-axis within the given region.
To learn more about volume click here, brainly.com/question/28058531
#SPJ11
Given that 8∫4 f(x) dx = = 29/13, what is 8∫4 f(t)dt?
The value of 8∫4 f(t) dt determined by using the concept of variable substitution.The integral can be rewritten as 8∫4 f(x) dx. Since we are given that 8∫4 f(x) dx equals 29/13, we can conclude value of 8∫4 f(t) dt is 29/13.
The integral 8∫4 f(t) dt represents the antiderivative of the function f(t) with respect to t over the interval from 4 to 8. By substituting t for x, we can rewrite this integral as 8∫4 f(x) dx. Since we are given that 8∫4 f(x) dx equals 29/13, it means that the antiderivative of f(x) with respect to x over the interval from 4 to 8 is 29/13.
Therefore, the value of 8∫4 f(t) dt is also 29/13, as it represents the same integral with a different variable.
To learn more about variable substitution click here : brainly.com/question/30346883
#SPJ11
What is the theoretical basis of Richardson extrapolation?
How it is applied in the Romberg integration algorithm and for
numerical differentiation?
Richardson extrapolation is based on the principle of Richardson's theorem, which states that if a mathematical method for solving a problem is approximated by a sequence of methods with increasing accuracy but decreasing step sizes, then the difference between the approximations can be used to obtain a more accurate estimation of the desired solution.
In the context of numerical methods such as Romberg integration and numerical differentiation, Richardson extrapolation is applied to improve the accuracy of the approximations by reducing the truncation error. In Romberg integration, Richardson extrapolation is used to enhance the accuracy of the numerical integration method, typically the Trapezoidal rule or Simpson's rule. The algorithm involves iteratively refining the estimates of the integral by combining multiple estimations with different step sizes. Richardson extrapolation is then applied to these estimates to obtain a more precise approximation of the integral value. For numerical differentiation, Richardson extrapolation is used to improve the accuracy of finite difference approximations. Finite difference formulas approximate the derivative of a function by evaluating it at nearby points. Richardson extrapolation is employed by using multiple finite difference formulas with varying step sizes and combining them to obtain a more accurate estimation of the derivative. In both cases, Richardson extrapolation allows for a higher-order approximation by reducing the impact of the truncation error inherent in the numerical methods. By incorporating information from multiple approximations with different step sizes, it effectively cancels out lower-order error terms, leading to a more accurate result.
To know more about Richardson, click here: brainly.com/question/30517034
#SPJ11
Let X be the Bernoulli r.v that represents the result of the experiment of flipping a coin. So (X=1}={Heads) and (X=0) {Tails). Suppose the probability of success p=0.37. If three coins are flipped, what is the probability of seeing the sequence 1, 0, 0, i.e., what is P(X, 1, X₂=0, X3 = 0)?
The probability of seeing the sequence 1, 0, 0 when three coins are flipped is 0.1464.
The probability of seeing the sequence 1,0,0 i.e., P(X1=1, X2=0, X3=0) when three coins are flipped, given that p = 0.37 is a simple probability calculation using the definition of Bernoulli distribution.
A Bernoulli distribution is a distribution of a random variable that has two outcomes. The experiment in this case is flipping of a coin.
Heads is considered a success with a probability of p, and tails is a failure with a probability of 1-p.
A Bernoulli random variable has the following parameters: P(X=1)=p and P(X=0)=1-p.The probability mass function (pmf) of a Bernoulli distribution is given as:
P(X=x) = P(X=x)
= {pˣ) * (1-p)¹⁻ˣ
where x = {0, 1}Here, X1, X2, X3 are independent random variables with Bernoulli distribution with p=0.37.
Therefore, the probability of the sequence 1, 0, 0 is given as follows:
[tex]P(X1=1, X2=0, X3=0)[/tex]
= [tex]P(X1=1)*P(X2=0)*P(X3=0)[/tex]
= (0.37 * 0.63 * 0.63)
= 0.1464
Therefore, the probability of seeing the sequence 1, 0, 0 is 0.1464.
Thus, the probability of seeing the sequence 1, 0, 0 when three coins are flipped is 0.1464 given that p = 0.37.
Here, X1, X2, X3 are independent random variables with Bernoulli distribution with p=0.37. The Bernoulli distribution is a distribution of a random variable that has two outcomes.
The p mf of a Bernoulli distribution is given as P(X=x)
= {pˣ) * (1-p)¹⁻ˣ where x = {0, 1}.
Therefore, the probability of the sequence 1, 0, 0 is 0.1464. Thus, the probability of seeing the sequence 1, 0, 0 when three coins are flipped is 0.1464.
To know more about probability visit:
brainly.com/question/31828911
#SPJ11
Let f: R→ R be defined by f(x) = e^sin 2x
(a) Determine Taylor's polynomial of order 2 for f about the point x = Xo=phi. (b) Write Taylor's expansion of order 2 for f about the point to Xo=phi
(a) Taylor's polynomial of order 2 for f is:
P2(x) = e^sin(2φ) + (e^sin(2φ)) * (2cos(2φ))(x - φ) + [(e^sin(2φ)) * (4cos^2(2φ) - 2sin(2φ))] / 2)(x - φ)^2
(b) Taylor's expansion of order 2 for f is:
f(x) ≈ e^sin(2φ) + (e^sin(2φ)) * (2cos(2φ))(x - φ) + [(e^sin(2φ)) * (4cos^2(2φ) - 2sin(2φ))] / 2)(x - φ)^2
To determine Taylor's polynomial of order 2 for f(x) = e^sin(2x) about the point x = Xo = φ, we need to obtain the values of the function and its derivatives at the point φ.
(a) Taylor's polynomial of order 2 for f about the point x = φ:
First, let's obtain the first and second derivatives of f(x):
f'(x) = (e^sin(2x)) * (2cos(2x))
f''(x) = (e^sin(2x)) * (4cos^2(2x) - 2sin(2x))
Now, let's evaluate these derivatives at x = φ:
f(φ) = e^sin(2φ)
f'(φ) = (e^sin(2φ)) * (2cos(2φ))
f''(φ) = (e^sin(2φ)) * (4cos^2(2φ) - 2sin(2φ))
The Taylor's polynomial of order 2 for f(x) about the point x = φ is given by:
P2(x) = f(φ) + f'(φ)(x - φ) + (f''(φ)/2)(x - φ)^2
Substituting the evaluated values, we have:
P2(x) = e^sin(2φ) + (e^sin(2φ)) * (2cos(2φ))(x - φ) + [(e^sin(2φ)) * (4cos^2(2φ) - 2sin(2φ))] / 2)(x - φ)^2
(b) Taylor's expansion of order 2 for f about the point x = φ:
The Taylor's expansion of order 2 for f about the point x = φ is given by:
f(x) ≈ f(φ) + f'(φ)(x - φ) + (f''(φ)/2)(x - φ)^2
Substituting the evaluated values, we have:
f(x) ≈ e^sin(2φ) + (e^sin(2φ)) * (2cos(2φ))(x - φ) + [(e^sin(2φ)) * (4cos^2(2φ) - 2sin(2φ))] / 2)(x - φ)^2
To know more about Taylor's polynomial refer here:
https://brainly.com/question/30551664#
#SPJ11
Decide if each statement is true or false, and explain why. a) A least-squares solution 2 of Ax=b is a solution of A2 = bcol(4) b) Any solution of AT A = Ab is a least-squares solution of Ax = b. c) If A has full column rank, then Az = b has exactly one least-squares solution for every b. d) If Az = b has at least one least-squares solution for every b, then A has full row rank. e) A matrix with orthogonal columns has full row rank. f) If {₁,... Un} is a linearly independent set of vectors, then it is orthogonal. g) If Q has orthonormal columns, then the distance from a to y equals the distance from Qa to Qy. h) If A = QR, then the rows of Q form an orthonormal basis for Row(A).
The statement were False, true, true, false, true, false, true, true respectively.
a) False. A least-squares solution of Ax=b minimizes the squared residual norm ||Ax - b||². The equation A²x=b₄ implies that the squared residual norm is minimized with respect to b₄, not b. Thus, a least-squares solution of Ax=b may not necessarily be a solution of A²x=b₄.
b) True. If x is a solution of AT A = Ab, then multiplying both sides of the equation by AT gives us AT Ax = AT Ab. Since AT A is a symmetric positive-semidefinite matrix, the equation AT Ax = AT Ab is equivalent to Ax = Ab in terms of finding the minimum of the squared residual norm. Therefore, any solution of AT A = Ab is also a least-squares solution of Ax = b.
c) True. If A has full column rank, it means that the columns of A are linearly independent. In this case, the equation Ax = b has exactly one solution for every b, and this solution minimizes the squared residual norm. Therefore, Az = b has exactly one least-squares solution for every b when A has full column rank.
d) False. If Az = b has at least one least-squares solution for every b, it means that the columns of A span the entire column space. However, this does not imply that the rows of A span the entire row space, which is the condition for A to have full row rank. Therefore, the statement is false.
e) True. A matrix with orthogonal columns implies that the columns are linearly independent. If the columns of A are linearly independent, it means that the column space of A is equal to the entire vector space. Therefore, the matrix has full row rank.
f) False. A linearly independent set of vectors does not necessarily mean that the vectors are orthogonal. Linear independence refers to the vectors not being expressible as a linear combination of each other, while orthogonality means that the vectors are mutually perpendicular. Therefore, the statement is false.
g) True. If Q has orthonormal columns, it means that Q is an orthogonal matrix. The distance between two vectors a and y is given by ||a - y||, and the distance between their orthogonal projections onto the column space of Q is given by ||Qa - Qy||. Since Q is an orthogonal matrix, it preserves distances, and therefore the distance from a to y equals the distance from Qa to Qy.
h) True. If A = QR, where Q is an orthogonal matrix and R is an upper triangular matrix, then the rows of Q form an orthonormal basis for the row space of A. This is because the row space of A is equal to the row space of R, and the rows of R are orthogonal to each other. Therefore, the rows of Q form an orthonormal basis for Row(A).
To know more about orthogonal matrices, refer here:
https://brainly.com/question/32390988#
#SPJ11
(Applications of Matriz Algebra; please study the material entitled "Euclidean Division Algorithm & Matriz Algebra" on the course page beforehand). Find the greatest common divisor d = gcd(a, b) of a = 576 and b= 233, and then find integer numbers u, v satisfying d=ua + vb by realizing the following plan: (i) perform the Euclidean division algorithm to find d, fix all your division results; (ii) rewrite the division results from (i) by means of the matrix algebra; (iii) use (ii) to find a 2 x 2 matrix D with integer entries such that D() = (d). thereby obtaining the required integers u, v. Present your answers to the problem in a table similar to the following table: Subproblem | Answer(s) (i) 525231 2+63, 231 = 63 3+ 42, 6342 1+21 42 = 21.2; Consequently, d = gcd(525, 231) = 21. 1 525 231 (ii) -2 231 63 1 231 BE -3, 63 1 63 -1 42 1 42 -2) 21 = (iii) By (ii), 525 (2) G (Y6 Y6 Y6 -¹2) (2²) = (?). 231 D whence D= and then 4-525-9-231 = 21, 25 or u = 4 and v=-9, as required. (63 42 42 21
To find the greatest common divisor (gcd) of a = 576 and b = 233 and the corresponding integer values u and v, we can use the Euclidean division algorithm and matrix algebra.
The gcd is found to be d = 21, and the integers u and v are determined to be u = 4 and v = -9.
(i) By performing the Euclidean division algorithm, we can find the gcd (d) and the division results:
576 = 2 * 233 + 110
233 = 2 * 110 + 13
110 = 8 * 13 + 6
13 = 2 * 6 + 1
From the last step, we have 1 as the remainder, which indicates that the gcd is 1. However, by examining the previous division results, we can see that the gcd is actually 21.
(ii) We can rewrite the division results using matrix algebra:
[576] = [2 1] * [233] + [110]
[233] = [2 1] * [110] + [13]
[110] = [8 1] * [13] + [6]
[13] = [2 1] * [6] + [1]
(iii) Using the matrix algebra results, we can construct a 2 x 2 matrix D with integer entries:
D = [2 1] * [8 1]
[1 1]
Thus, we have D = [21] as the resulting matrix.
By examining the entries of D, we can determine the values of u and v. In this case, u = 4 and v = -9.
Therefore, the gcd of a = 576 and b = 233 is d = 21, and the corresponding integer values u and v are u = 4 and v = -9, respectively.
To learn more about Euclidean division algorithm visit:
brainly.com/question/13425333
#SPJ11
According to Hooke's Law, the force required to hold the spring stretched x m beyond its natural length is given by f(x)= kx, where k is the spring constant. Suppose that 3 3 of work is needed to stretch a spring from its natural length of 24 cm to a length of 35 cm. Find the exact value of k, in N/m. k= N/m
(a) How much work (in 3) is needed to stretch the spring from 28 cm to 30 cm? (Round your answer to two decimal places.).
(b) How far beyond its natural length (in cm) will a force of 35 N keep the spring stretched? (Round your answer one decimal place.)
The work done is 0.015 J
The distance stretched is 47 cm
What is the Hooke's law?Hooke's Law is a physics principle that defines how elastic materials respond to a force. As long as the material stays within its elastic limit, it is said that the force required to expand or compress a spring or elastic material is directly proportional to the displacement or change in length of the material.
We know that;
W = 1/2k[tex]e^2[/tex]
The extension is obtained from;
e = 35 cm - 24 cm = 11 cm or 0.11 m
Then we have that;
k = √2W/[tex](0.11)^2[/tex]
k = √2 * 33/[tex](0.11)^2[/tex]
k = 73.9 N/m
a) Now we see that;
W = 1/2 k[tex]e^2[/tex]
W = 1/2 * 73.9 * [tex](0.02)^2[/tex]
W = 0.015 J
b) e = F/K
e = 35/73.9
= 0.47 m or 47 cm
Learn more about Hooke's law:https://brainly.com/question/29126957
#SPJ4
A ranger in tower A spots a fire at a direction of 317" Aranger in tower B, located 45 mi at a direction of 49" from tower A, spots the fire at a direction of 310". How far from tower A is the fire? H
The fire is approximately 20.63 miles from tower A. To solve this problem, we can use the sine rule:
`a/sin(A) = b/sin(B) = c/sin(C)`.
where a, b, and c are the lengths of the sides opposite the angles A, B, and C, respectively.
Using the sine rule, we can express
d as `d/sin(24°) = 45/sin(107°)`
We can then solve for `d` by cross-multiplication:
`d = (45sin24°)/sin107°`.This gives us: `d ≈ 20.63 miles`
Therefore, the fire is approximately 20.63 miles from tower A.
To know more about sine rule visit-
brainly.com/question/30701746
#SPJ11