In the balanced equation for the given reaction under basic conditions, there will be 2 hydroxide ions appearing on the left side. The correct answer is (c) 2 on the left.
When a reaction occurs under basic conditions, hydroxide ions (OH-) are involved in the chemical process. They act as a base, accepting protons (H+) to form water molecules (H2O). In this reaction, the hydroxide ions are responsible for oxidizing the zinc metal to zinc ions.
The balanced equation for the reaction is as follows:
2Ag(s) + 2OH-(aq) + Zn2+(aq) ? Ag2O(s) + Zn(s) + H2O(l)
In this equation, two hydroxide ions (OH-) appear on the left side, indicating their involvement as part of the base in the reaction. They react with the zinc ions (Zn2+) to form water (H2O) and facilitate the reduction of silver ions (Ag+) to silver oxide (Ag2O).
Therefore, there are 2 hydroxide ions on the left side of the balanced equation, and the correct answer is (c) 2 on the left.
Know more about Hydroxide ion here:
https://brainly.com/question/14619642
#SPJ11
Propose a structure for an amine of formula C4H9N, which liberates a gas when treated with NaNO2 and HCl. The 13C NMR spectrum is as follows, with attached protons in parentheses: ? 14(2), ? 34.3(2), ? 50.0(1).
Based on the given 13C NMR spectrum and the information about the liberation of gas upon treatment with [tex]NaNO_2[/tex] and HCl, a possible structure for the amine of formula [tex]C_4H_9N[/tex] is tert-butylamine.
The given 13C NMR spectrum indicates the presence of three different types of carbon atoms in the molecule. The chemical shift at δ 14 corresponds to a quaternary carbon, whereas the chemical shifts at δ 34.3 and δ 50.0 correspond to two different types of tertiary carbons. Based on the given information, a possible structure for the amine of formula [tex]C_4H_9N[/tex] could be tert-butylamine [tex](CH_3)_3CNH_2[/tex].
When tert-butylamine is treated with [tex]NaNO_2[/tex] and HCl, it liberates nitrogen gas ([tex]N_2[/tex]) due to the reaction of [tex]NaNO_2[/tex] with the amine group. The chemical shift at δ 14 corresponds to the quaternary carbon in the tert-butyl group, whereas the chemical shifts at δ 34.3 and δ 50.0 correspond to the two different types of tertiary carbons in the molecule.
To learn more about butylamine follow the link:
https://brainly.com/question/7731807
#SPJ4
The correct question is:
Propose a structure for an amine of formula [tex]C_4H_9N[/tex], which liberates a gas when treated with [tex]NaNO_2[/tex] and HCl. The 13C NMR spectrum is as follows, with attached protons in parentheses: δ 14(2), δ 34.3(2), δ 50.0(1).
If a buffer solution is 0.170 M in a weak acid (Ka=5.5×10−5) and 0.430 M in its conjugate base, what is the pH?
First, find the pKa by taking the negative logarithm of Ka:
pKa = -log(5.5 x 10^-5) = 4.26
Next, plug in the concentrations of the acid ([HA] = 0.170 M) and the conjugate base ([A-] = 0.430 M) into the equation:
pH = 4.26 + log (0.430/0.170) ≈ 4.87
The Henderson-Hasselbalch equation is used to calculate the pH of buffer solutions containing a weak acid and its conjugate base. The equation accounts for the relative concentrations of the acid and conjugate base, as well as the acidity constant of the weak acid (Ka).
Summary: The pH of the buffer solution containing 0.170 M weak acid with Ka = 5.5 x 10^-5 and 0.430 M conjugate base is approximately 4.87.
Learn more about acid click here:
https://brainly.com/question/25148363
#SPJ11
What is the ratio of the probability of finding a molecule moving with the average speed to the probability of finding a molecule moving with 3 times the average speed? How does this ratio depend on temperature?
The ratio of the probability of finding a molecule moving with the average speed to the probability of finding a molecule moving at 3 times the average speed depends on the Maxwell-Boltzmann distribution.
This distribution describes the probability of a molecule having a specific speed based on temperature and molecular mass. The ratio of these probabilities can be expressed as P(v)/P(3v), where P(v) represents the probability of a molecule moving at average speed and P(3v) represents the probability of a molecule moving at 3 times the average speed. As temperature increases, the Maxwell-Boltzmann distribution becomes wider, and the peak shifts towards higher speeds. This means that at higher temperatures, the probability of finding a molecule moving at 3 times the average speed will increase compared to lower temperatures. Therefore, the ratio P(v)/P(3v) will decrease with increasing temperature.
To know more about Maxwell-Boltzmann distribution
https://brainly.com/question/31428655
#SPJ11
what volume of 0.110m h2o4 is required to exactly neutralize 10.0ml of 0.085 m naoh
The required volume of 0.110 M H2C2O4 to neutralize 10.0 mL of 0.085 M NaOH is 3.86 mL.
The balanced chemical equation for the neutralization reaction between oxalic acid (H2C2O4) and sodium hydroxide (NaOH) is:
H2C2O4 + 2NaOH → Na2C2O4 + 2H2O
From the equation, we see that 1 mole of H2C2O4 reacts with 2 moles of NaOH. Therefore, we can use the following formula to calculate the amount (in moles) of H2C2O4 present in 10.0 mL of 0.085 M NaOH:
moles of NaOH = Molarity × Volume (in liters)
moles of NaOH = 0.085 mol/L × 0.0100 L = 8.50 × 10^-4 mol
Since 1 mole of H2C2O4 reacts with 2 moles of NaOH, the amount (in moles) of H2C2O4 required to neutralize the NaOH is:
moles of H2C2O4 = 8.50 × 10^-4 mol ÷ 2 = 4.25 × 10^-4 mol
Finally, we can use the molarity and amount (in moles) of H2C2O4 to calculate the required volume of the solution:
Molarity = moles ÷ volume (in liters)
0.110 mol/L = 4.25 × 10^-4 mol ÷ volume (in liters)
Volume (in liters) = 4.25 × 10^-4 mol ÷ 0.110 mol/L = 0.00386 L
Therefore, the required volume of 0.110 M H2C2O4 to neutralize 10.0 mL of 0.085 M NaOH is 3.86 mL.
Learn more about NaOH here:
https://brainly.com/question/29854404
#SPJ11
suggest why polonium-210 and astatine-211 are the isotopes of those elements with the longest half-lives.
Polonium-210 and astatine-211 are isotopes of their respective elements with the longest half-lives because they have a balanced number of protons and neutrons in their nuclei.
This balanced ratio of particles in the nucleus makes the isotopes more stable, and less likely to decay into other elements. Additionally, both polonium and astatine are relatively heavy elements, which makes it more difficult for them to decay through the emission of particles. Therefore, these isotopes have longer half-lives compared to other isotopes of the same elements. In both cases, the balance between the protons and neutrons in their nuclei provides relatively more stability compared to other isotopes of polonium and astatine. As a result, these isotopes undergo radioactive decay at a slower rate, leading to their longer half-lives. Therefore, these isotopes have longer half-lives compared to other isotopes of the same elements.
Learn more about isotopes here:
https://brainly.com/question/21536220
#SPJ11
Given the equation: N2 + O2 - NO2, what has to be done to properly balance
the equation so that the law of conservation of mass is shown?
Remove the subscript of 2 after N on the reactants side.
Add a coefficient of 2 in front of O2 on the reactant side.
Add a coefficient of 2 in front of the O2 on the reactant side and a coefficient
of 2 in front of NO2 on the product side.
Add a subscript of 2 after N on the product side.
The correct option to properly balance the equation and satisfy the law of conservation of mass is (c) Add a coefficient of 2 in front of the O2 on the reactant side and a coefficient of 2 in front of NO2 on the product side.
To properly balance the equation N2 + O2 → NO2, the coefficient of 2 needs to be added in front of NO2 on the product side. This ensures that the number of atoms of each element is equal on both sides of the equation, thus satisfying the law of conservation of mass.
The balanced equation would be:
N2 + 2O2 → 2NO2
By adding the coefficient of 2 in front of NO2 on the product side, we ensure that there are two nitrogen atoms, four oxygen atoms, and four oxygen atoms on both sides of the equation. This demonstrates that mass is conserved, as the total number of atoms of each element remains the same before and after the reaction.
To balance the equation, we can use coefficients to adjust the number of molecules involved. We have several options:
Remove the subscript of 2 after N on the reactants side.
This would result in N instead of N2, but it does not address the imbalance of oxygen atoms.
Add a coefficient of 2 in front of O2 on the reactant side.
This balances the oxygen atoms but does not address the imbalance of nitrogen atoms.
Add a coefficient of 2 in front of the O2 on the reactant side and a coefficient of 2 in front of NO2 on the product side.
This balances both nitrogen and oxygen atoms, resulting in 2N2 + 4O2 → 4NO2.
Add a subscript of 2 after N on the product side.
This would result in NO2 instead of NO2, but it does not address the imbalance of oxygen atoms.
for more such questions on conservation
https://brainly.com/question/30759580
#SPJ8
How many mL of 2.5 M HCI are required to neutralize 15 mL of 5.0 M NaOH?
To determine the amount of HCl required to neutralize 15 mL of 5.0 M NaOH, we need to use the equation: M1V1 = M2V2, 30 mL of 2.5 M HCl is required to neutralize 15 mL of 5.0 M NaOH.
To determine the amount of HCl required to neutralize 15 mL of 5.0 M NaOH, we need to use the equation:
M1V1 = M2V2
where M1 is the molarity of the acid, V1 is the volume of the acid, M2 is the molarity of the base, and V2 is the volume of the base.
In this case, we know that the molarity of NaOH is 5.0 M, the volume of NaOH is 15 mL, and we want to find the volume of HCl required to neutralize it, which we'll call V1.
First, we need to calculate the number of moles of NaOH:
5.0 M * 0.015 L = 0.075 moles NaOH
Since HCl and NaOH react in a 1:1 ratio, we know that we'll need 0.075 moles of HCl to neutralize the NaOH.
Next, we need to find the volume of 2.5 M HCl that contains 0.075 moles of HCl:
2.5 M = 2.5 moles/L
0.075 moles / 2.5 moles/L = 0.03 L = 30 mL
Therefore, 30 mL of 2.5 M HCl is required to neutralize 15 mL of 5.0 M NaOH.
For more such questions on equation
https://brainly.com/question/13847161
#SPJ11
The picture below shows a closed system before and after undergoing a change.
System before change
System after change
What was changed in the system?
Answer:
Based on your description, it seems that the change in the system is that the water in the container was heated. This could have caused a change in temperature and possibly a change in the physical state of the water (from liquid to gas).
Explanation:
Why can we use a gas mixture, such as air, to study the general behavior of an ideal gas under ordinary conditions
We can use a gas mixture, such as air, to study the general behavior of an ideal gas under ordinary conditions because air closely approximates the properties of an ideal gas.
An ideal gas is a theoretical concept that assumes that gas particles have zero volume and do not interact with each other except through perfectly elastic collisions. Although no real gas exactly follows these assumptions, air behaves very similarly to an ideal gas under most conditions.
Air is composed of a mixture of gases, primarily nitrogen and oxygen, that behave like ideal gases. These gases have relatively low molecular weights, so they move rapidly and can be compressed and expanded easily. Additionally, air at standard temperature and pressure (STP) has a density and pressure that are close to those of an ideal gas.
Therefore, by studying the behavior of air, we can gain insight into the general behavior of an ideal gas. This allows us to make predictions and perform calculations related to the behavior of gases under ordinary conditions, such as in a car engine or in a balloon. While it's important to note that real gases do not perfectly follow the assumptions of ideal gases, studying the properties of air can provide a good approximation for many practical applications.
learn more about gas
https://brainly.com/question/29419487
#SPJ11
many medical pet scans use the isotope 18f , which has a half-life of 1.8 h . a sample prepared at 10:00 a.m. has an activity of 27 mci . for the steps and strategies involved in solving a similar problem, you may view a video tutor solution. part a what is the activity at 1:00 p.m., when the patient is injected? express your answer in millicuries.
The activity at 1:00 p.m. when the patient is injected is 14.4 mCi.
To solve this problem, we need to use the formula for radioactive decay:
A = A₀(e^(-kt))
Where A is the final activity, A₀ is the initial activity, k is the decay constant, and t is the time elapsed.
For this problem, we know that the half-life of the isotope 18f is 1.8 hours, which means that k = ln(2)/t₁/₂ = ln(2)/1.8 = 0.385.
We also know that the sample prepared at 10:00 a.m. has an activity of 27 mCi, which means that A₀ = 27.
To find the activity at 1:00 p.m. (3 hours after the sample was prepared), we can plug in the values we know into the formula:
A = A₀(e^(-kt))
A = 27(e^(-0.385*3))
A = 14.4 mCi
Therefore, the activity at 1:00 p.m. when the patient is injected is 14.4 mCi.
learn more about patient
https://brainly.com/question/30282393
#SPJ11
a 10.5 g sample of a substance with specific heat 0.385 is cooled by removing 133 j of heat. by how much does the temperature of the substance decrease?
A 10.5 g sample of a substance with specific heat 0.385 is cooled by removing 133 j of heat. 32.47°C is the temperature of the substance decrease
To find how much the temperature of the substance decreases, we can use the formula:
Q = mcΔT
Where Q is the heat removed (133 J), m is the mass of the substance (10.5 g), c is the specific heat of the substance (0.385 J/g°C), and ΔT is the change in temperature that we want to find.
It is determined that 654.5 joules of heat are needed to raise the temperature of a 100 g chunk of copper from 18 °C to 35 °C.
Rearranging the formula to solve for ΔT, we get:
ΔT = Q / (mc)
Plugging in the values we have:
ΔT = 133 J / (10.5 g x 0.385 J/g°C)
ΔT = 32.47°C
Therefore, the temperature of the substance decreases by 32.47°C.
Learn more about heat here
https://brainly.com/question/31037751
#SPJ11
it takes 48.0 j to raise the temperature of an 11.9 g piece of unknown metal from 13.0 ∘c to 24.9 ∘c . what is the specific heat for the metal? express your answer with the appropriate units.
The specific heat of the unknown metal is approximately 0.338 J/(g·°C).The specific heat (c) of a substance is defined as the amount of heat required to raise the temperature of 1 gram of the substance by 1 degree Celsius.
To find the specific heat of the unknown metal, we can use the formula:
q = mcΔT
where q is the amount of heat transferred, m is the mass of the metal, c is the specific heat of the metal, and ΔT is the change in temperature.
In this problem, we are given the following information:
q = 48.0 J
m = 11.9 g
ΔT = 24.9 °C - 13.0 °C = 11.9 °C
Substituting these values into the formula, we get:
48.0 J = (11.9 g) c (11.9 °C)
Solving for c, we get:
c = 48.0 J / (11.9 g × 11.9 °C) ≈ 0.338 J/(g·°C)
Therefore, the specific heat of the unknown metal is approximately 0.338 J/(g·°C).
Learn more about metal here:
https://brainly.com/question/18153051
#SPJ11
if one mole of fecl3·4nh3 reacts with agno3 to produce one mole of agcl(s) , how can the formula fecl3·4nh3 be re-written to show the proper coordination sphere? [fe(nh3)3cl3]
The proper coordination sphere for the given complex is [Fe(NH3)3Cl3]. The formula FeCl3·4NH3 can be rewritten as [Fe(NH3)3Cl3]·NH3.
In the given reaction, one mole of FeCl3·4NH3 reacts with AgNO3 to produce one mole of AgCl(s). To show the proper coordination sphere, the formula needs to be rewritten to represent the coordination complex accurately. The correct formula for the complex is [Fe(NH3)3Cl3], indicating that Fe is coordinated with three NH3 ligands and three Cl ligands. However, the original formula FeCl3·4NH3 shows an additional NH3 molecule, which should be present outside the coordination sphere. Thus, the formula can be rewritten as [Fe(NH3)3Cl3]·NH3 to show the proper coordination sphere and the presence of the additional NH3 molecule outside the complex.
To know more about the coordination sphere visit:
https://brainly.com/question/12889244
#SPJ11
14.Calculate the [H+] and the [OH-] of a substance that has a pH of 5.45.
Answer: [H+] = 2.24 x 10^-6 M [OH-] = 4.46 x 10^-9 M.
Explanation for [H+]: To find [H+], we can use the formula pH = -log[H+]. Solving for [H+] gives [H+] = 2.24 x 10^-6 M.
Explanation for [OH-]: To find [OH-], we can use the fact that the product of [H+] and [OH-] is always equal to 1.0 x 10^-14 at 25°C. We can first find [H+] using the formula pH = -log[H+]. Solving for [H+] gives [H+] = 2.24 x 10^-6 M. Plugging this value into the expression [H+][OH-] = 1.0 x 10^-14 gives [OH-] = 4.46 x 10^-9 M.
The [H⁺] is 3.54 × 10⁻⁶ and [OH⁻] is 2.8 × 10⁻⁹ of a substance that has a pH of 5.45.
pH is defined as the negative logarithm of H⁺ ion concentration.
pH is a measure of how acidic or basic a substance is. In our everyday routine, we encounter and drink many liquids with different pH. Water is a neutral substance. Soda and coffee are often acidic.
The pH is an important property, since it affects how substances interact with one another and with our bodies. In our lakes and oceans, pH determines what creatures are able to survive in the water.
Given,
pH = 5.45
pH = - log [H⁺]
[H⁺] = 3.54 × 10⁻⁶M
[H⁺] × [OH⁻] = 10⁻¹⁴
[OH⁻] = 2.8 × 10⁻⁹M
Learn more about pH, here:
https://brainly.com/question/15289741
#SPJ1
which one of the following diatomic molecules is least likely to exist? select all that apply and briefly explain your reasoning. i. li2 ii. be2 iii. b2
Out of the three diatomic molecules given, the least likely to exist is Be2. This is because Be2 would have to form with two valence electrons, which would lead to an unstable molecular bond. Beryllium has two valence electrons, which are in the 2s orbital.
Li2 and B2 are more likely to exist as diatomic molecules because they both have valence electrons in their outermost energy level, allowing for the formation of stable covalent bonds. Lithium has one valence electron in the 2s orbital, and therefore, it can form a covalent bond with another lithium atom by sharing this valence electron. Boron has three valence electrons in the 2s and 2p orbitals, and can form a covalent bond with another boron atom by sharing one of these valence electrons.
In summary, Be2 is least likely to exist as a diatomic molecule due to its inability to form stable covalent bonds and violate the octet rule. Li2 and B2 are more likely to exist as diatomic molecules due to their ability to form stable covalent bonds with valence electrons in their outermost energy level.
To know more about diatomic molecules visit:-
https://brainly.com/question/11815815
#SPJ11
Calculate the solubility of Pb(IO3)2 solution in which the concentration of IO3- is 0. 015 M. Ksp for Pb(IO3)2 = 3. 2 x 10-13.
Select one:
The solubility of Pb(IO₃)₂ in a solution with IO₃- concentration of 0.015 M is 1.12 x 10⁻⁴ M.
The solubility of Pb(IO₃)₂ can be calculated using the Ksp expression:
Ksp = [Pb2+][IO₃-]₂
We are given the Ksp value as 3.2 x 10⁻¹³ and the concentration of IO₃- as 0.015 M. Let x be the solubility of Pb(IO₃)₂ in moles per liter.
At equilibrium, the concentration of Pb² and IO₃- in the saturated solution will be equal to x. Therefore, we can write:
Ksp = [Pb2+][IO₃-]₂ = x * (2x)² = 4x³
Substituting the given values, we get:
3.2 x 10⁻¹³ = 4x³
Solving for x, we get:
x = (3.2 x 10⁻¹³ / 4)^(1/3) = 1.12 x 10⁻⁴ M
Therefore, the solubility of Pb(IO₃)₂ in a solution with IO₃- concentration of 0.015 M is 1.12 x 10⁻⁴ M.
To know more about solubility follow the link:
https://brainly.com/question/31493083
#SPJ4
Mars
What is the orbit of the Mars?
Is the Sun at the center of the Mars’s orbit?
Describe the motion of Mars throughout its orbit? Does it move at constant speed?
Click on each highlighted section and record the area. What do you notice about each area?
Click on the “Toggle Major Axes” button. Record any observation regarding the perihelion distance (Rp) and the aphelion distance (Ra).Mars
.
Mars orbits the Sun in an elliptical shape with the Sun at one focus, not the center.
Mars follows Kepler's laws, moving faster when closer to the Sun and slower when farther away.
The perihelion distance Rp and aphelion distance Ra are Mars' closest and farthest points from the Sun during its orbit. Rp is the closest distance and Ra is the farthest distance.
What is Mars?Mars moves faster when close to the Sun in orbit, slower when far away. Rp and Ra indicate closest and farthest points in orbit. The perihelion is the closest distance between Mars and the Sun, while the aphelion is the farthest.
Mars' elliptical orbit causes distance variation. Mars is closer to the Sun at perihelion and farther at aphelion due to the smaller Rp compared to Ra.
Learn more about Mars from
https://brainly.com/question/644043
#SPJ1
How much CaCl2 will be produced if you start with 140.0g of Ca(OH)2 and 115.6g of HCI?
Ca(OH)2 + 2HCI ---> CaCl2 + 2H2O
please help
209.8 g CaCl₂ will be produced if you start with 140.0g of Ca(OH)₂ and 115.6g of HCI.
Calculate the moles of each reactant using their respective molar masses:
Moles of Ca(OH)₂ = 140.0 g / 74.09 g/mol
= 1.891 mol
Moles of HCl = 115.6 g / 36.46 g/mol
= 3.172 mol
According to the balanced chemical equation, the stoichiometric ratio between Ca(OH)₂ and HCl is 1:2. This means that for every 1 mole of Ca(OH)₂, 2 moles of HCl react completely.
Moles of HCl (3.172 mol) than required to react with all the Ca(OH)₂ (1.891 mol). This means that HCl is in excess and Ca(OH)₂ is limiting the reaction.
Using the stoichiometric ratio, calculate the theoretical yield of CaCl₂:
Moles of CaCl₂ = 1.891 mol Ca(OH)₂ x (1 mol CaCl₂ / 1 mol Ca(OH)₂)
= 1.891 mol CaCl₂
To convert moles to grams, use the molar mass of CaCl₂:
Mass of CaCl₂ = 1.891 mol x 110.98 g/mol
= 209.8 g
Therefore, the theoretical yield of CaCl₂ is 209.8 g.
To learn more about CaCl₂, follow the link:
https://brainly.com/question/30657830
#SPJ1
for the reaction given in part a, δs∘rxn is 33.0 j/k . what is the standard gibbs free energy of the reaction, δg∘rxn ? express your answer numerically in kilojoules.
The standard Gibbs free energy change of the reaction is 0.04 kJ/mol, which can be expressed numerically as 0.04 kJ.
\We can use the relationship between Gibbs free energy change, enthalpy change, and entropy change to solve for the standard Gibbs free energy change of the reaction:
ΔG° = ΔH° - TΔS°
where ΔH° is the standard enthalpy change of the reaction, ΔS° is the standard entropy change of the reaction, T is the temperature in Kelvin, and ΔG° is the standard Gibbs free energy change of the reaction.
We are given that ΔS° = 33.0 J/K. However, we need to convert this to kJ/K, since the units of ΔG° are kJ/mol:
ΔS° = 33.0 J/K * (1 kJ/1000 J) = 0.033 kJ/K
We are not given the value of ΔH°, so we cannot calculate ΔG° directly. However, we can use the fact that at equilibrium, ΔG° = 0. This allows us to set up the equation:
0 = ΔH° - TΔS°
Solving for ΔH°, we get:
ΔH° = TΔS° = (298 K) * (0.033 kJ/K) = 9.87 kJ/mol
Therefore, the standard enthalpy change of the reaction is 9.87 kJ/mol. To calculate the standard Gibbs free energy change of the reaction, we can substitute the values into the equation:
ΔG° = ΔH° - TΔS°
= (9.87 kJ/mol) - (298 K)(0.033 kJ/K)
= 9.87 kJ/mol - 9.83 kJ/mol
= 0.04 kJ/mol
Therefore, the standard Gibbs free energy change of the reaction is 0.04 kJ/mol, which can be expressed numerically as 0.04 kJ.
Learn more about reaction here:
https://brainly.com/question/31257177
#SPJ11
at 3278c, the equilibrium concentrations are [ch3oh] 5 0.15 m, [co] 5 0.24 m, and [h2] 5 1.1 m for the reaction ch3oh1 g2mco1 g2 1 2h2 1 g2 calculate kp at this temperature.
At chemical equilibrium, the equilibrium constant of a chemical reaction is the value of its reaction quotient, a state proceeds by a dynamic chemical system after enough time has passed at which its composition has no quantifiable tendency towards further change.
To calculate the equilibrium constant (Kp) at [tex]3278^{0} C[/tex], we can use the following equation:
[tex]Kp=(Pco)^{2} * PH^{2} /Pch^{2}oh[/tex]
where P represents the partial pressure of each gas in the reaction. We can convert the concentrations given in the problem to partial pressures using the ideal gas law:
[tex]P = nRT/V[/tex]
where n is the number of moles of gas, R is the gas constant, T is the temperature in Kelvin, and V is the volume. At equilibrium, the number of moles of each gas will be constant, so we can use the given concentrations to calculate the number of moles and then use the ideal gas law to find the partial pressures.
[tex][ch_{3} oh]=0.15M[/tex][tex]
[tex][co]=0.24M[/tex]
[tex][h_{2} ]=1.1M[/tex]
The molar mass of each gas is:
[tex]Mch_{3} oh=32.04g/mol[/tex]
[tex]Mco=28.01g/mol[/tex]
[tex]Mh_{2} =2.02g/mol[/tex]
We can calculate the number of moles of each gas using the given concentrations and the volume of the system:
[tex]nch_{3} oh=0.15mol/L*1L=0.15mol[/tex]
[tex]nco=0.24mol/L*1L=0.24mol[/tex]
[tex]nh_{2} =1.1mol/L*1L=1.1mol[/tex]
Using the ideal gas law, we can convert the number of moles to partial pressures:
[tex]Pch_{3} oh=nch_{3} oh*R*T/V=0.15mol*0.08206L atm/mol K*3551K/1L=4.73atm[/tex]
[tex]Pco=nco*R*T/V=0.24mol*0.08206L atm/mol K*3551K/1L=7057atm[/tex]
[tex]PH_{2} =nh_{2} *R*T/V=1.1 mol*0.08206Latm/molK*3551K/1L=34.98atm[/tex]
Now we can plug these values into the equation for Kp:
[tex]kp=(Pco)^{2} *PH_{2} /Pch_{3} oh[/tex]
[tex]p=(7.57atm)^{2} *2*34.98atm/4.73atm[/tex]
kp=4.95*[tex]10^{4}[/tex]
Therefore, the equilibrium constant (Kp) at [tex]3278^{0} C[/tex] for the reaction [tex]ch_{3} oh_{1} g_{2} mco_{1} g_{21} 2h_{2} 1g_{2}[/tex] is [tex]4.95*10^{4}[/tex].
Learn more about equilibrium constants here:
https://brainly.com/question/10038290
#SPJ11
will the bond length in a cation be higher or lower than a ground state
The bond length in a cation can vary depending on the specific situation. In general, the bond length in a cation tends to be shorter than the bond length in the ground state due to the loss of an electron.
When an atom loses an electron to become a cation, it becomes positively charged, and the remaining electrons are held more tightly to the nucleus. This stronger attraction between the positively charged nucleus and the remaining electrons leads to a shorter bond length.
However, there are exceptions to this general rule, and the bond length in a cation can sometimes be longer than the bond length in the ground state. This can occur when the cation is in a highly excited state, or when the cation is interacting with other molecules or ions in a complex system.
So, in summary, the bond length in a cation can be higher or lower than the bond length in the ground state, depending on the specific circumstances.
To know more about bond length, refer
https://brainly.com/question/16012396
#SPJ11
4.68 l of n2(g) is mixed with 3.79 l of h2(g) and reacts with 100% yield. what volume of nh3(g) is produced? assume all gases are at the same temperature and pressure.
The volume of [tex]NH_3[/tex] produced is 7.55 L, assuming constant temperature and pressure. [tex]H_2[/tex] is the limiting reactant, and all of it will be consumed in the reaction, producing 0.338 moles of [tex]NH_3[/tex].
The balanced equation for the reaction between nitrogen gas and hydrogen gas to form ammonia gas is:
[tex]$N_{2(g)} + 3H_{2(g)} \rightarrow 2NH_{3(g)}}$[/tex]
From the equation, we see that 1 mole of [tex]N_2[/tex] reacts with 3 moles of [tex]H_2[/tex] to produce 2 moles of [tex]NH_3[/tex]. Therefore, we need to determine the limiting reactant to calculate the volume of [tex]NH_3[/tex] produced.
To do this, we can use the ideal gas law, which states that the number of moles of a gas is directly proportional to its volume, assuming constant temperature and pressure. Therefore, we can convert the given volumes of [tex]N_2[/tex] and [tex]H_2[/tex] to moles and compare their ratios to determine the limiting reactant.
Using the ideal gas law, we can calculate the number of moles of [tex]N_2[/tex]:
[tex]$n(N_2) = \dfrac{V(N_2)}{V_m(N_2)}$[/tex]
[tex]$n(H_2) = \dfrac{V(H_2)}{V_m(H_2)}$[/tex]
Substituting the given values into these equations, we get:
[tex]n(N_2)[/tex] = 4.68 L / 22.4 L/mol = 0.209 moles
[tex]n(H_2)[/tex] = 3.79 L / 22.4 L/mol = 0.169 moles
Since the stoichiometric ratio of [tex]N_2[/tex] to [tex]H_2[/tex] is 1:3, we can see that [tex]H_2[/tex] is the limiting reactant, as we only have 0.169 moles of [tex]H_2[/tex], which is less than the amount required to react with all of the [tex]N_2[/tex] (0.209 moles). Therefore, all of the [tex]H_2[/tex] will be consumed in the reaction, and we can calculate the volume of [tex]NH_3[/tex] produced using the number of moles of [tex]NH_3[/tex] formed, which is twice the number of moles of [tex]H_2[/tex] consumed:
[tex]$n(NH_3) = 2 \times n(H_2) = 2 \times 0.169 , \text{moles} = 0.338 , \text{moles}$[/tex]
Using the ideal gas law again, we can calculate the volume of [tex]NH_3[/tex]:
[tex]$V(NH_3) = n(NH_3) \times V_m(NH_3)$[/tex]
where Vm([tex]NH_3[/tex]) is the molar volume of [tex]NH_3[/tex] at the same temperature and pressure.
Substituting the given values, we get:
[tex]V(NH_3)[/tex] = 0.338 moles x 22.4 L/mol = 7.55 L
To learn more about limiting reactants
https://brainly.com/question/14225536
#SPJ4
what is the binding energy in kj/mol nucleons for gallium-69? kj/mol nucleons
According to the given information the correct answer is the binding energy for gallium-69 is approximately 7989.9 kJ/mol nucleons.
The binding energy of an isotope, in this case gallium-69 (Ga-69), is the energy required to disassemble its nucleus into its constituent protons and neutrons. Binding energy is typically reported in units of mega-electronvolts per nucleon (MeV/nucleon). To convert binding energy from MeV/nucleon to kilojoules per mole of nucleons (kJ/mol nucleons), you can use the following conversion factors:
1 MeV = 1.60218 x 10^(-13) J
1 mole = 6.02214 x 10^(23) particles
For gallium-69, the binding energy is 8.26 MeV/nucleon. Now we can convert this value to kJ/mol nucleons:
8.26 MeV/nucleon * (1.60218 x 10^(-13) J/MeV) * (6.02214 x 10^(23) nucleons/mol) * (1 kJ/1000 J) = 7989.9 kJ/mol nucleons
So, the binding energy for gallium-69 is approximately 7989.9 kJ/mol nucleons.
To know more about Binding energy visit:
https://brainly.com/question/31817434
#SPJ11
Which of the following species has a Lewis structure with a molecular geometry similar to SO3?Answers:a) NH3b) ICl3c) CO32-d) SO32-e) PCl3
The species with a Lewis structure that has a molecular geometry similar to SO3 is option (c) CO32-. SO3 has a trigonal planar geometry, meaning it has three electron domains around the sulfur atom with no lone pairs.
Similarly, CO32- has a trigonal planar geometry, with three electron domains around the central carbon atom and no lone pairs.
Option (a) NH3 has a trigonal pyramidal geometry, with three electron domains around the central nitrogen atom and one lone pair. Option (b) ICl3 has a T-shaped geometry, with three electron domains around the central iodine atom and two lone pairs. Option (d) SO32- has a trigonal planar geometry, with three electron domains around the central sulfur atom and one lone pair. Option (e) PCl3 has a trigonal pyramidal geometry, with three electron domains around the central phosphorus atom and one lone pair.
Overall, it is important to note that molecular geometry is determined by the number of electron domains around the central atom, which includes both bonding pairs and lone pairs of electrons.
learn more about sulfur atom
https://brainly.com/question/2805594
#SPJ11
match each property of a liquid to what it indicates about the relative strength of the intermolecular forves in that liquid high boiling point
high vapor pressure
high surface tension
high viscosity"
Match these properties of a liquid to what they indicate about the relative strength of the intermolecular forces in that liquid.
1. High boiling point: This indicates strong intermolecular forces, as more energy is required to overcome the forces and change the liquid into a gas.
2. High vapor pressure: This suggests weaker intermolecular forces, as the liquid molecules easily escape into the vapor phase, leading to higher vapor pressure.
3. High surface tension: This indicates strong intermolecular forces, as the molecules at the surface of the liquid are held together tightly, creating a high surface tension.
4. High viscosity: This suggests strong intermolecular forces, as the molecules in the liquid experience more resistance to flow due to the strong interactions between them.
Learn more about vapor here:
https://brainly.com/question/20899075
#SPJ11
select the option that correctly expresses the rate of the following general reaction in terms of the change in concentration of each of the reactants and products: a (g) 2b (g) → c (g)
The correct option that expresses the rate of the given general reaction in terms of the change in concentration of each of the reactants and products is: Rate = -1/2 ∆[A] / ∆t = -∆[B] / ∆t = 1/∆[C] / ∆t Option D is correct.
In the given reaction, the stoichiometric coefficients of the reactants and products are used to determine the rate expression. The rate is expressed in terms of the change in concentration of each species over time (∆[X] / ∆t). Since the coefficient of A is 1 and the coefficient of B is 2, the rate of change of A is divided by 1/2 (∆[A] / ∆t) and the rate of change of B is divided by 1 (∆[B] / ∆t). The coefficient of C is 1, so the rate of change of C is divided by 1 (∆[C] / ∆t). Therefore, the rate expression is:
Rate = -1/2 ∆[A] / ∆t = -∆[B] / ∆t = 1/∆[C] / ∆t
This means that the rate of the reaction is directly related to the change in concentration of any of the reactants or products.
Learn more about rate of the reaction here
https://brainly.com/question/13782336
#SPJ11
The Complete question is
select the option that correctly expresses the rate of the following general reaction in terms of the change in concentration of each of the reactants and products: a (g) 2b (g) → c (g)
A. Rate = − Δ[A] Δt = − 2 1 Δ[B] Δt = Δ[C] Δt
B. Rate = − Δ[A] Δt = − Δ[B] Δt = Δ[C] Δt
C. Rate = − Δ[A] Δt = − 1 2 Δ[B] Δt = Δ[C] Δt
D.-1/2 ∆[A] / ∆t = -∆[B] / ∆t = 1/∆[C] / ∆t
when deciding if a substituion reactoin is unimolecular or bimoleculrar the most important factor to consider is
When determining if a substitution reaction is unimolecular or bimolecular, the most important factor to consider is the rate-determining step of the reaction.
The rate-determining step is the slowest step in the reaction mechanism and the one that limits the overall rate of the reaction.
In an unimolecular substitution reaction, the rate-determining step involves only one molecule, typically the substrate itself. For example, in the case of an S<sub>N</sub>1 reaction, the rate-determining step involves the dissociation of the leaving group to form a carbocation intermediate. This step is independent of the concentration of the nucleophile and therefore the reaction rate depends only on the concentration of the substrate.
In contrast, in a bimolecular substitution reaction, the rate-determining step involves two molecules, typically the substrate and the nucleophile. For example, in the case of an S<sub>N</sub>2 reaction, the rate-determining step involves the simultaneous attack of the nucleophile on the substrate and the expulsion of the leaving group. This step is dependent on both the concentration of the substrate and the concentration of the nucleophile.
Therefore, to determine if a substitution reaction is unimolecular or bimolecular, it is important to consider the mechanism of the reaction and identify the rate-determining step. If the rate-determining step involves only one molecule, the reaction is likely to be unimolecular, whereas if the rate-determining step involves two molecules, the reaction is likely to be bimolecular.
Learn more about substitution reaction here:
https://brainly.com/question/10143438
#SPJ11
for the auto-ionization of water, δrh∘=5.58×104 j/mol. 2h2o(l)↽−−⇀h3o (aq) oh−(aq)kw=1.0×10−14 at 25∘c assuming that δrh∘ is constant over the temperature range 25–100°c, calculate kw at 52 ∘c.
The value of kw at 52°C is 8.3×10^-12. The van't Hoff equation relates the change in equilibrium constant to the change in temperature.
ln(K2/K1) = -(ΔH°/R)[(1/T2) - (1/T1)]
where K1 and K2 are the equilibrium constants at temperatures T1 and T2, respectively, ΔH° is the standard enthalpy change, and R is the gas constant.
In this case, we want to find kw at 52°C, so we need to use the van't Hoff equation to calculate the equilibrium constant at 25°C and 52°C, and then use the equation kw = [H3O+][OH-] to find kw at 52°C.
First, let's calculate the equilibrium constant at 25°C (298 K) using the known value of kw:
kw = [H3O+][OH-] = 1.0×10^-14
[H3O+] = [OH-] = sqrt(kw) = 1.0×10^-7 M
The equilibrium constant expression for the auto-ionization of water is:
K = [H3O+][OH-]/[H2O]^2
At 25°C, we can assume that the concentration of water is 55.6 M (the density of water is 1 g/mL, and the molar mass of water is 18 g/mol), so:
K1 = (1.0×10^-7)^2/(55.6)^2 = 1.8×10^-16
Now we can use the van't Hoff equation to find the equilibrium constant at 52°C (325 K):
ln(K2/K1) = -(ΔH°/R)[(1/T2) - (1/T1)]
ln(K2/1.8×10^-16) = -(5.58×10^4 J/mol)/(8.314 J/(mol·K))[1/325 K - 1/298 K]
ln(K2/1.8×10^-16) = 17.49
K2/1.8×10^-16 = e^17.49
K2 = 2.6×10^-1
Finally, we can use the equilibrium constant to calculate kw at 52°C:
kw = [H3O+][OH-] = K[H2O]^2
kw = (2.6×10^-1)(55.6)^2
kw = 8.3×10^-12
Therefore, the value of kw at 52°C is 8.3×10^-12.
Learn more about temperature here:
https://brainly.com/question/12035620
#SPJ11
what is the role of naoh in the synthesis of diphenylmethanol from benzophenone ?
NaOH acts as a catalyst in the synthesis of diphenylmethanol from benzophenone by deprotonating benzophenone to form a benzophenone anion, which then reacts with benzhydrol to form diphenylmethanol.
The synthesis of diphenylmethanol from benzophenone involves the reaction of benzophenone with benzhydrol in the presence of NaOH. NaOH plays a crucial role in this reaction as a catalyst. It deprotonates benzophenone to form a benzophenone anion, which is a better nucleophile than the neutral benzophenone. The benzophenone anion then reacts with benzhydrol to form diphenylmethanol.
The role of NaOH as a catalyst is to increase the rate of reaction by providing a pathway for the reaction to occur with lower activation energy. Without the presence of NaOH, the reaction may still occur, but it would proceed much slower and may require harsher reaction conditions. Therefore, NaOH is essential in the synthesis of diphenylmethanol from benzophenone.
Learn more about activation energy here:
https://brainly.com/question/28384644
#SPJ11
which of the following choices is the best explanation for why it does not matter how much water you added when dissolving the acid or when carrying out the titration? the titration equivalence point occurs when the moles of acid present in the sample have been exactly neutralized by the moles of base added. additional water added to the reaction vessel has no effect on the moles of base added. water is neither a reactant nor a product of the neutralization reaction and therefore does not affect the measurement. the volume of the sample plus titrant is constant throughout the titration even if external water is added. none of the above.
The correct option is C, The best explanation for why it does not matter how much water you added when dissolving the acid or when carrying out the titration is: water is neither a reactant nor a product of the neutralization reaction and therefore does not affect the measurement.
Titration is a common laboratory technique used in chemistry to determine the concentration of an unknown solution by reacting it with a solution of known concentration. The process involves slowly adding the known solution, called the titrant, to the unknown solution, called the analyte, until the reaction is complete.
Titration is typically carried out using an indicator, which changes color when the reaction is complete, indicating the endpoint of the titration. The most commonly used indicators include phenolphthalein, bromothymol blue, and methyl orange. Titration is widely used in a variety of applications, including in the pharmaceutical industry to measure the potency of drugs, in environmental testing to measure the concentration of pollutants, and in food science to determine the acidity of foods and beverages.
To know more about Titration refer to-
brainly.com/question/31483031
#SPJ4