Answer: (a) The products are [tex]Be(NO_{3})_{2}[/tex] and AgCl. The balanced equation is [tex]BeCl_{2}(aq) + 2AgNO_{3}(aq) \rightarrow Be(NO_{3})_{2}(aq) + 2AgCl(s)[/tex].
(b) The type of reaction is double displacement reaction.
Explanation:
(a) The complete reaction equation will be as follows.
[tex]BeCl_{2}(aq) + 2AgNO_{3}(aq) \rightarrow Be(NO_{3})_{2}(aq) + 2AgCl(s)[/tex]
Number of atoms on reactant side are as follows.
Be = 1Cl = 2Ag = 2[tex]NO_{3}[/tex] = 2Number of atoms present on product side are as follows.
Be = 1Cl = 2Ag = 2[tex]NO_{3}[/tex] = 2Here, number of atoms on both reactant and product side are the same. Hence, it is a balanced chemical equation.
(b) A reaction in which two reactant species tend to change their ions with each other and form new compounds. This type of reaction is called double displacement reaction.
As the given reaction is as follows.
[tex]BeCl_{2}(aq) + 2AgNO_{3}(aq) \rightarrow Be(NO_{3})_{2}(aq) + 2AgCl(s)[/tex]
This shows that ions are being exchanges by the reactants [tex]BeCl_{2}[/tex] and
[tex]AgNO_{3}[/tex]. The ions are [tex]Be^{2+}[/tex], [tex]Cl^{-}[/tex], [tex]Ag^{2+}[/tex] and [tex]NO^{2-}_{3}[/tex].
Therefore, this reaction is a double displacement reaction.
1. Molecules are held together by:
a, ionic bonds
b. covalent bonds
c. both a and b
A: ionic bond, you know why becasue it is
What is the significance of Plato’s problem of “saving the appearances” to the scientific mindset of the philosophers and Differentiate geocentric from heliocentric model of the universe.
Answer:
If it started with Plato or a little later, the job for Greek Astronomers employed as the platonic tradition was, correctly or incorrectly, to save appearances: obviously to describe, in a mixture of uniform circular motions, irregular motion observed by senses.
Explanation:
Each compound listed can be converted to hexanoic acid or sodium hexanoate. Identify the reagent or reagents that can perform this transformation.
a. hexanal
b. methyl hexanoate
c. I -bromopentane
d. 1 -hexanol
(or hexan- 1 -o1)
e. hexanenitrile
Answer:
a. Hexanal
Reagent: - Hot acidified potassium permanganate solution.
or : Ammoniacal silver nitrate solution
or : Fehling's solution.
or : Hot acidified potassium dichromate ( VI ) solution.
Some organic compounds can be oxidised to carboxylic acid using suitable oxidising agents. Alkanes can be converted to acid or acid salt by carboxylation reaction and alkyl halides can be converted using Grignard reagent and then hydrolysis.
What are carboxylic acids?Carboxylic acids are organic acids containing the functional group COOH. It can be prepared through oxidation of various of organic compounds.
Hexanal can be converted to hexanoic acid using carboxylation that is reaction with carbon dioxide.
Methyl hexanoate is an ester which can be converted to hexanoic acid by hydrolysis. Reaction with water introduces the H+ group into the ester group COOMe.
1 bromopentane can be converted into hexanoic acid using grignard reagent RMg followed by hydrolysis.
Alcohols can be easily oxidised to acids. Thus, 1-hexanol can be oxidised to hexanoic acid using oxidising agents such as potassium permanganate.
Nitriles can be oxidised to corresponding carboxylic acid using oxidising agents such as chromium chloride or grignard reagent.
To find more on carboxylic acids, refer here:
https://brainly.com/question/28167857
#SPJ2
What is the name of the process scientists use to give different names to different organisms?
astronomy
economy
identification
taxonom
Answer:
D). Taxonomy.
Explanation:
'Taxonomy' is described as the process or the science of finding, describing, classifying, and naming different organisms. It is characterized as the technique of classification of animals, micro-organisms, plants, etc. into different categories or hierarchies. It has primarily been divided into eight distinct types like kingdom, species, order, family, etc.
Astronomy is associated with the study of the physical universe while the economy is defined as the study of efficient utilization of resources and identification is the process of recognizing an object. Thus, option D is the correct answer.
2.0 L of oxygen gas and 8.0 L of nitrogen gas at STP are mixed together. The gaseous mixture is compressed to occupy 2.0 L at 298 K. What is the pressure exerted by this mixture?
Answer:
5.5 atm
Explanation:
Step 1: Calculate the moles in 2.0 L of oxygen at STP
At STP, 1 mole of an ideal gas occupies 22.4 L.
2.0 L × 1 mol/22.4 L = 0.089 mol
Step 2: Calculate the moles in 8.0 L of nitrogen at STP
At STP, 1 mole of an ideal gas occupies 22.4 L.
8.0 L × 1 mol/22.4 L = 0.36 mol
Step 3: Calculate the total number of moles of the mixture
n = 0.089 mol + 0.36 mol = 0.45 mol
Step 4: Calculate the pressure exerted by the mixture
We will use the ideal gas equation.
P × V = n × R × T
P = n × R × T / V
P = 0.45 mol × (0.0821 atm.L/mol.K) × 298 K / 2.0 L = 5.5 atm
Which example of regeneration is also considered reproduction?
Explanation:
Regeneration is a type of asexual reproduction in which the organism is capable of regrowing certain body parts.
Answer: Regeneration is defined as organism's ability to regrow damaged or lost body parts. It is a type of asexual reproduction which is shown by many fully differentiated organisms. Organism such as Hydra uses regenerative cells for reproduction in the process of budding. The young Hydra gets its nourishment from the parent.
Explanation:
2. What are the two types of pressure?
O Medium pressure/Extreme pressure
ebo...
Medium pressure/ Low pressure
O High pressure/Low pressure
Medium pressure/ High pressure
Answer:
O High pressure/Low pressure
Explanation:
A low pressure system has lower pressure at its center than the areas around it. Winds blow towards the low pressure, and the air rises in the atmosphere where they meet. ... A high pressure system has higher pressure at its center than the areas around it. Winds blow away from high pressure.
The two types of pressure commonly referred to are high pressure and low pressure. Therefore option 3 is correct.
High pressure/Low pressure: This option correctly identifies the two main types of pressure. High pressure refers to conditions where the pressure is greater than atmospheric pressure, such as in compressed gases or in high-pressure systems.
Low pressure refers to conditions where the pressure is less than atmospheric pressure, such as in a vacuum or in areas of low atmospheric pressure, like the center of a weather system.
Know more about atmospheric pressure:
https://brainly.com/question/31634228
#SPJ2
Uranium-235 decays to form lead-207. The half-life of uranium-235 is 704,000,000 years. What is the approximate age of an igneous rock with a 1:1 ratio of uranium-235 atoms to lead-207 atoms?
Answer:
The approximate age of the igneous rock is [tex]7.042\times 10^{6}[/tex] years.
Explanation:
Chemically speaking, the Uranium-235 decays to form Lead-207 throughout time. All isotopes decay exponentially by means of the following model:
[tex]m(t) = m_{o}\cdot e^{-\frac{t}{\tau} }[/tex] (1)
In addition, we can determine the time constant of the former isotope in terms of its half life, that is:
[tex]\tau = \frac{t_{1/2}}{\ln 2}[/tex] (2)
Where:
[tex]m_{o}[/tex] - Initial mass of Uranium-235, in atoms.
[tex]m(t)[/tex] - Current mass of Uranium-235, in atoms.
[tex]\tau[/tex] - TIme constant, in years.
[tex]t_{1/2}[/tex] - Half-life of Uranium-235, in years.
Please remind that a 1 : 1 ratio of Uranium-235 to Lead-207 atoms means that current mass of Uranium-235 is a half of its initial mass. If we know that [tex]m(t) = 0.5\cdot m_{o}[/tex] and [tex]t_{1/2} = 7.04\times 10^{8}\,yr[/tex], then the approximate age of the igneous rock is:
[tex]\tau = \frac{7.04\times 10^{8}\,yr}{\ln 2}[/tex]
[tex]\tau \approx 1.016\times 10^{9}\,yr[/tex]
[tex]t = -\tau \cdot \ln \left(\frac{m(t)}{m_{o}} \right)[/tex]
[tex]t = -(1.016\times 10^{9}\,yr)\cdot \ln \frac{1}{2}[/tex]
[tex]t \approx 7.042\times 10^{6}\,yr[/tex]
The approximate age of the igneous rock is [tex]7.042\times 10^{6}[/tex] years.
The warming of our atmosphere is due to contain gases like carbon dioxide and water vapor called greenhouse gases that insulate (trap heat) Earth. What would happen to Earth without these greenhouse gases?
Answer:
the earth would be covered in ice and we would not be able to survive as there is not natural insulation
How many moles of water are produced when 2 moles of NaHCO3 react with 2 moles of HCI?
Answer:
H₂O = 3.56 moles
MgCl₂ = 1.78 moles
Explanation:
Which molecule has weakest bond?
Answer:
ionic bonds are the weakest bonds
Explanation:
A mixture of 0.197 mol carbon dioxide and 0.00278 mol water vapor is held at 30.0 C and 2.50 atm. What is the partial pressure of each gas?
The partial pressure of each gas is the product of its mole fraction and total pressure. The partial pressure of carbon dioxide is 2.46 atm and the partial pressure of water vapor is 0.034.
What is Dalton's law of partial pressures ?Dalton's law of partial pressure states that the partial pressure of the component gases in a mixture is the product of its mole fraction and the total pressure.
Given that, number of moles of carbon dioxide = 0.197 moles.
number of moles of water vapor =0.00278 mole.
mole fraction of carbon dioxide = 0.197 / (0.197 + 0.00278) = 0.98
Total pressure = 2.50 atm
then partial pressure of carbon dioxide = 0.98 × 2.50 = 2.46 atm
Mole fraction of water vapor = 0.00278 / (0.197 + 0.00278) = 0.0139
partial pressure of water vapor = 0.0139 × 2.50 = 0.034 atm.
Therefore, the partial pressure of carbon dioxide and water vapor are 2.46 and 0.034 atm respectively.
To find more on partial pressure, refer here:
https://brainly.com/question/13199169
#SPJ2
What must be true about the matter at the start of a fire versus the end?
Explanation:
Three things are required in proper combination before ignition and combustion can take place---Heat, Oxygen and Fuel. There must be Fuel to burn. There must be Air to supply oxygen. There must be Heat (ignition temperature) to start and continue the combustion process.
Place these elements in order of increasing ionization energy and JUSTIFY A REASON FOR THIS TREND. C Ge Pb Si Sn
Answer: The given elements are arranged in order of increasing ionization energy as Pb < Sn < Ge < Si < C.
Explanation:
The amount of energy required to remove a loosely bound electron from an isolated neutral gaseous atom is called ionization energy.
Larger is the size of an atom more easily it will lose its valence electrons. Hence, less will its ionization energy.
Whereas smaller is the size of an atom more energy will be required to pull out the electron. Hence, more will be its ionization energy.
This means that on moving down a group ionization energy decreases and on moving along a period from left to right the ionization energy decreases.
The given elements are C, Ge, Pb, Si, and Sn. All these elements belong to group 14 of the periodic table.
Therefore, these elements are arranged in order of increasing ionization energy as follows.
Pb < Sn < Ge < Si < C
Thus, we can conclude that given elements are arranged in order of increasing ionization energy as Pb < Sn < Ge < Si < C.
Which type of molecule is shown below? I CH3 C=C H CH3 O A. Alkene O B. Cyclic alkane O C. Alkane O D. Alkyne
Answer:
Alkene
Explanation:
Took the test.
The correct answer is Option (A) Alkene.
What is Alkene?Alkenes are the hydrocarbon which contain double bond of carbon and carbon.The general formula of alkene are CnH2n.Alkenes are unsaturated hydrocarbons. Why other options are incorrect?The other options are incorrect because the structure given in the question is C4H8. The IUPAC name of the structure is is 1- butene .The structure describes the general formula of alkene CnH2n where we can say that n= 4Hence , Option (A) is correct and rest options are incorrect.Learn more about Alkenes below
https://brainly.com/question/24033294
#SPJ2
Which of the following are elements in this equation: 2H2O2 (aq) → 2H2O (l) + O2 (g)?
Check all that apply:
A. O
B. g
C. Aq
D. H
I need to know the answer asap
What is the scientific method?
O A. A book describing scientific experiments
B. A description of proper laboratory techniques
O C. A scientific approach to answering questions
D. A way of thinking about scientific problems
Answer:
C.A scientific approach to answering questions
Explanation:
Which of these metals reacts more vigorously with water?
1. Zinc
2. Magnesium
Answer:
magnesium
Explanation:
because zinc does not react with water because it too forms a protective layer of insoluble.
How much heat will be absorbed by a 26.3 g piece of aluminum (specific heat = 0.930 J/g･°C) as it changes temperature from 23.0°C to 67.0°C?
Answer:
[tex]\boxed {\boxed {\sf 1076.196 \ Joules}}[/tex]
Explanation:
Since we are given the mass, specific heat, and temperature, we should use the following formula for heat energy.
[tex]q=mc\Delta T[/tex]
The mass of the aluminum is 26.3 grams. Its specific heat is 0.930 Joules per gram degree Celsius. We need to find the change in temperature.
The change in temperature is the difference between the initial temperature to the final temperature. The temperature changes from 23.0°C to 67.0°C, so the initial is 23 degrees and the final is 67 degrees. ΔT= final temperature - initial temperature ΔT= 67°C - 23°C ΔT= 44°CNow we know all the values.
m= 26.3 g c= 0.930 J/g °C ΔT= 44°CSubstitute the values into the formula.
[tex]q= (26.3 \ g}) \times (0.930 \ J/g \textdegree C) \times (44 \textdegree C)[/tex]
Multiply the first two numbers together. The units of grams cancel.
[tex]q= 24.459 \ J/ \textdegree C \times 44 \textdegree C[/tex]
Multiply again. This time, the units of degrees Celsius cancel.
[tex]q=1076.196 \ J[/tex]
1076.196 Joules of heat will be absorbed by the piece of aluminum.
5. If 4 moles of nitrogen gas reacts with excess hydrogen gas, how many moles of NH3 will be produced?
Be sure to balance the equation first.
__N2 + __ H2 → __ NH3
a. 8 moles NH3
b. 4 moles NH3
C. 2 moles NH3
d. 12 moles NH3
Explain the term pycnocline
Answer:
It is a Cline or layer where density gradient is greatest within a body of water
Which of the following is an organic moleclue ?
Answer:
water
Explanation:
maize is called monocot plant,why ? dive any two reasons
opss sorry this is science subject not chemistry
Answer:
because it has one cotyledon and it has parallel venation also maize is grain..
4. Iron (III) oxide, Fe2O3, is formed when iron, Fe, combines with oxygen in the air. How many grams of
Fe2O3 are formed when 12.5 g of Fe reacts completely with oxygen?
4Fe +302 → 2Fe203
a. 8.74 g Fe2O3
b. 17.9 g Fe2O3
C. 32.2 g Fe2O3
d. 71.5 g Fe2O3
1:Which example is not a physical change?
2: Which of the following is not a clue that a chemical reaction is taking place?
state two applications of simple distillation of separating mixture
Answer:
Purify drinking water of unwanted
chemicals andminerals such as salt.Hope this helps! :D
Find the number of grams of calcium chloride needed to prepare 500.0ml of a 4.0m solution
Answer:
222 g
Explanation:
First we convert 500.0 mL to L:
500.0 mL / 1000 = 0.500 LThen we use the definition of molarity to calculate how many calcium chloride moles are required:
Molarity = moles / litersMolarity * liters = moles4.0 M * 0.500 L = 2.00 molNow we convert 2.00 moles of calcium chloride into grams, using its molar mass:
2.00 mol * 111 g/mol = 222 gTherefore, the independent variable was _____ and the dependent variable was _____
sugar concentration
pressure
solubility
temperature
Answer:
temperature and solubility
Explanation:
In the experiment where we are testing the solubility of sugar at different temperatures and pressure, the dependant variable is the solubility and the independent variables are the temperature, pressure and sugar concentration.
What is independent variables ?Independent variables in an experiment is the variables which does not depends on any other variables and on which we can have access or control.
Dependant variables are dependant on the independent variables and they change with respect to the change in independent variables. On dependant variables are those which we are studying and can have no direct control over it,
In the solubility measurement, solubility is the dependant variable and the we are measuring it under different conditions that are the independent variables such as temperature, pressure, sugar concentration etc.
To find more on dependant variables, refer here:
https://brainly.com/question/1479694
#SPJ2
explain the importance of fingerprint record in criminal investigation.
Answer:
One of the most important uses for fingerprints is to help investigators link one crime scene to another involving the same person. Fingerprint identification also helps investigators to track a criminal's record, their previous arrests and convictions, to aid in sentencing, probation, parole and pardoning decisions.
Explanation: