Answer:
1+2=2+1 is the answer for the question
The Lewis diagram for BH2 is:
[H-B-H]-
The electron- pair geometry around the B atom in BH2 is:__________.
There are______lone pair(s) around the central atom, so the geometry of BH2 is________ .
Answer:
Electron pair geometry- trigonal planar
There is one lone pair around the boron atom
The geometry of BH2 is bent
Explanation:
The valence shell electron pair repulsion theory offers a frame work for determining the shape of molecules based on the number of electron pairs of the valence shell of the central atom in the molecule.
In BH2-, the central atom is boron. There is a lone pair on boron. Owing to the lone pair on boron, the molecular geometry of BH2 is bent.
The geometry of the electron pair around the Boron atom in [tex]BH_2[/tex] is called the trigonal planar. In this case, there is a pair of isolated electrons around Boron, which is the central atom, allowing the [tex]BH2[/tex] molecule to have a folded geometry.
We can arrive at this answer because:
Boron is an element that has three electrons in its valence layer.With this, we can find out that it can make three covalent bonds or donate these electrons to achieve chemical stability.In the case of the [tex]BH_2[/tex] molecule, boron forms covalent bonds with Hydrogen.These bonds allow the Hydrogens to be positioned on either side of the Boron molecule, forcing a pair of their electrons to focus on the center of that molecule, until it is attracted to the extremities.This allows for a folded geometry around the molecule, allowing Boron to be an exception to the octet rule and achieve stability with 5 electrons in the valence layer.
More information:
https://brainly.com/question/22403376?referrer=searchResults
What would have a higher boiling point water or hydrocarbon ( from penny liquid stacking)
Answer:
Im pretty sure its hydrocarbon
Explanation:
What ratio of concentration of ammonia and ammonium chloride should be mixed to
prepare a buffer solution of pOH 5? (Kb for NH3 =1.8 x 10-4)
The ratio of concentration of ammonia and ammonium chloride : 0.05
Further explanationGiven
pOH=5
Kb for NH3 =1.8 x 10-4
Required
The ratio of concentration of ammonia (NH₃) and ammonium chloride(NH₄Cl)
Solution
Solutions containing ammonia and its salt: ammonium chloride are called alkaline buffers
Can be formulated : ( for the same of the volume, mol=concentration)
[tex]\tt \displaystyle [OH-]=Kb\times\frac{weak\:base\:mole}{salt\:mole\times valence}[/tex]
pOH=-log [OH⁻]
pOH=5⇒[OH⁻]=10⁻⁵
Valence for NH₄Cl = 1, so the concentration ratio :
[tex]\tt 10^{-5}=1.8\times 10^{-4}\times \dfrac{[~NH_3]}{[NH_4Cl]}\\\\0.05=\dfrac{[~NH_3]}{[NH_4Cl]}[/tex]
1s2 3s2 3p6 3s2 3p6 3d6 4s2 what is element
The element with the electron configuration, 1s2 3s2 3p6 3s2 3p6 3d6 4s2, will be iron.
Atomic number and electronic configurationsIn the electronic configuration of elements, the number of electrons possessed by the element is shared into the orbitals according to their energy levels.
The electrons are first shared in orbitals in the same energy level before pairing starts.
Also for neutral atoms, the number of electrons is equivalent to the number of protons. The number of protons in itself represents the atomic number of elements.
Thus, considering this electron configuration, 1s2 3s2 3p6 3s2 3p6 3d6 4s2; the total number of electrons in all the orbitals is 26. The element with the atomic number of 26 is iron.
More on electron configurations can be found here: https://brainly.com/question/14283892
#SPJ1
Which best defines a service? a task that is performed in exchange for payment an object that is acquired a plan that is executed an image that is drawn
Answer:
a task that is performed for payment
Explanation:
all of the other answers do not pertain to the question
A service is best defined as a task that is performed in exchange for payment.
What is a task?A task is an activity that needs to be accomplished within a defined period of time or by a deadline to work towards work-related goals, usually done in exchange for payment.
Thus, we can conclude that, a service is best defined as a task that is performed in exchange for payment.
Learn more about task here: https://brainly.com/question/12831236
#SPJ2
Which one is true? Elements in the same row have the same number of:
Explanation:
Elements in same row (i.e, from left to right) have the same number of electron shells.
In science why is it important to explain why the evidence supports your claim?
Pure sodium metal reacts violently with water according to the equation below
Na + H2O - NaO + H2
17 mol
If 0.75 mol of Na is placed in 500 g of
H,O how many moles of hydrogen
gas will be produced?
0.75 mol
28 mol
1.5 mol
Answer:
0.75 mol
Explanation:
Given data:
Number of moles of Na = 0.75 mol
Mass of water = 500 g
Moles of hydrogen gas produced = ?
Solution:
Chemical equation:
Na + H₂O → NaO + H₂
Number of moles of water:
Number of moles = mass/molar mass
Number of moles = 500 g/ 18 g/mol
Number of moles = 27.8 mol
now we will compare the moles of hydrogen gas with both reactant.
Na : H₂
1 : 1
0.75 : 0.75
H₂O : H₂
1 : 1
27.8 : 27.8
sodium will act as limiting reactant it produced small number of moles of hydrogen gas as compared to water.
Thus, number of moles of hydrogen gas are 0.75 mol.
Elisa feels tired because she has a condition that affects whether the right molecules are getting to her cells. If her body were functioning correctly, this is what would happen with oxygen:
Answer:
It would be working properly and providing her energy for her daily activities.
Explanation:
Hello!
In this case, since her oxygen is actually working properly, it is going to be travelling throughout her entire body (via blood) and therefore carbon dioxide would be released as the exhalation product due to cellular respiration carried out in the alveoli which provides energy for her daily activities.
However, the intrusion of different molecules to oxygen into her cells may affect the rate at which cellular respiration is carried out and therefore she may feel tired because such process provides energy to the body.
Best regards!
PLEASE HELP WILL GIVE BRAINLIEST
Answer: B
We use stoichiometric amounts of P4 and PH3
NO.9) It's actual yield
Which of the following is NOT a property of sodium
1. Sodium is a reactive METAL
2. Sodium is very SOFT
3. Sodium is a reactive GAS
4. Sodium forms a WHITE coating
Answer:
3
Explanation:
Sodium is not a gas, it is a Alkali Metal. I recommend studying the sections of the periodic table to help remember what each element should be.
Hope this helps.
please help me i will give brain list
Answer:
a. pentane = C5H12
b. Heptane = C7H16
c. Hexyne = C6H10
d. Octene = C8H16
e. Nonane = C9H20
Hope it helps.
1-pentene
Molecular Formula C5H10
Condensed Structural FormulaCH2=CH(CH2)2CH3
Melting Point (°C)–138
Boiling Point (°C)30
2- heptane is the straight-chain alkane with the chemical formula H3C(CH2)5CH3 or C7H16, and is one of the main components of gasoline (petrol).
g In this equation stands for the Rydberg energy, and stands for the principal quantum number of the orbital that holds the electron. (You can find the value of the Rydberg energy using the Data button on the ALEKS toolbar.) Calculate the wavelength of the line in the emission line spectrum of hydrogen caused by the transition of the electron from an orbital with to an orbital with . Round your answer to significant digits.
The complete question is attached to this answer
Answer:
2.75 * 10^-5 m
Explanation:
The energy of the absorbed photon = ΔE
ΔE = - Ry (1/n^2 final - 1/n^2initial)
Given that Ry = 2.18 *10^-18 J
nfinal = 9
ninitial =8
ΔE = - 2.18 *10^-18 (1/9^2- 1/8^2)
ΔE = - 2.18 *10^-18 (0.0123 - 0.0156)
ΔE = 7.194 * 10^-21 J
But
ΔE =hc/λ
h = 6.6 *10^-34Js
c= 3 * 10^8 ms-1
λ= the unknown
λ= hc/ΔE
λ= 6.6 *10^-34 * 3 * 10^8/ 7.194 * 10^-21
λ= 2.75 * 10^-5 m
HELP ASAP DUE IN 5 MINUTES WILL GIVE BRAINLIEST
Energy is conserved within a system, meaning that forms of energy are either transferred or transformed as they interact with objects. Which of the statements below correctly describe how energy is transferred or transformed in daily life?
Group of answer choices
Kinetic energy transforms into thermal energy when a heating pad is turned on.
Electrical energy is transferred into light energy so that a flashlight generates light when it’s turned on.
Chemical energy in food is transformed into mechanical energy as our body rides a bicycle down the street.
Nuclear energy is transferred to electrical energy to provide electricity for our homes.
Answer:
i do believe it is C. Chemical energy in food is transformed into mechanical energy as our body rides a bicycle down the street. but if i am wrong plz don't come at me but i believe that is right
Explanation:
Answer:
i do believe it is C. Chemical energy in food is transformed into mechanical energy as our body rides a bicycle down the street. but if i am wrong plz don't come at me but i believe that is right
Explanation:
a) Calculate the standard reaction entropy for the combustion of methane to carbon dioxide and liquid water at 298 K. b) Calculate the standard reaction entropy for the hydrolysis of liquid water to form oxygen and hydrogen gas. c) Do your results in (a) and (b) agree with the general rule that reaction entropies are positive if there is a net formation of gas in a reaction, and negative if the is a net reduction of gas?
Answer: (a) [tex]\Delta S^{0}[/tex] = - 242.2J/K.mol
(b) [tex]\Delta S^{0}[/tex] = 163.34J/K.mol
(c) Yes
Explanation: Entropy is the measure of randomness or disorder of a system. Standard Entropy has the symbol [tex]S^{0}[/tex].
Mathematically, Entropy is defined as
[tex]\Delta S^{0}=\Sigma S^{0}(products)-\Sigma S^{0}(reagents)[/tex]
Each substance has its own entropy value.
(a) Combustion of Methane:
[tex]CH_{4}+2O_{2}[/tex] ⇒ [tex]CO_{2}+2H_{2}O[/tex]
Using standard entropy table, entropy will be:
[tex]\Sigma S^{0}(products)=214+2(69.91)[/tex] = 353.8
[tex]\Sigma S^{0}=186.264+2(205.138)[/tex] = 596.54
[tex]\Delta S^{0}=[/tex] 353.8 - 596.54
[tex]\Delta S^{0}=[/tex] - 242.2
Standard Entropy for combustion of methane is [tex]\Delta S^{0}=[/tex] - 242.2 J/K.mol.
(b) Hydrolysis of Water:
[tex]H_{2}O_{(l)}[/tex] ⇒ [tex]H_{2}_{(g)}+1/2O_{2}_{(g)}[/tex]
[tex]\Sigma S^{0}(products)=130.684+0.5(205.138)[/tex] = 233.253
[tex]\Sigma S^{0}(reagents)=69.91[/tex]
[tex]\Delta S^{0}=[/tex] 233.253 - 69.91
[tex]\Delta S^{0}=[/tex] +163.34
Standard Entropy for hydrolysis of water is [tex]\Delta S^{0}=[/tex] + 163.34 J/K.mol
(c) Yes, the results prove the general rule: Reactions Entropies are positive for net formation of gas and negative for net reduction of gas. This happens because, as entropy is the measure of disorder, the entropy for gases are greater than for liquids and solids. So, when there is formation of a gas, Entropy increases and when there isn't, entropy decreases.
. A student adds 50 mL of Lead (II) Nitrate solution to 50 mL of potassium iodide. Each
solution is colorless, but when these two liquids are mixed, a yellow precipitate is
observed. What has most likely happened in the experiment?
Answer:
after the reaction between Lead (II) Nitrate solution and potassium iodide occur Lead(II) iodide was formed and it's yellow color.
Explanation:
Pb(NO3)2 + KI = KNO3 + PbI2
Show the calculation of the molality of a solution made by dissolving 15.9 grams of Ca3(PO4)2 in 400 grams of water.
The molality of a solution : 0.128 m
Further explanationGiven
15.9 g of Ca3(PO4)2 in 400 grams of water.
Required
The molality
Solution
molality = mol solute / kg solvent
solute= Ca3(PO4)2(MW=Molecular Weight: 310.2 g/mol)
mol solute :
[tex]\tt \dfrac{15.9}{310.2}=0.0512[/tex]
The molality :
[tex]\tt \dfrac{0.0512}{0.4~kg}=0.128~m[/tex]
Which chemical equation below is not balanced?
- 3 MgSO4 + 2 Nag PO4 → Mgs (PO4),+3 Na, S04
- 2 NaOH + HNO, → NaNO, + 2 H,0
- CH12 O6 4 6O2 → 6 CO, + 6 H,0
- HBr AGNO, → HNO, + AgBr
pic if needed ;)
Answer:
B
Explanation:
The second one is not balanced correctly.
2 NaOH + 2HNO3 → 2NaNO3 + 2 H20
I didn't notice this before but it can be balanced without the twos.
NaOH + HNO3 → NaNO3 + H20
It was still wrong. It needed to have the twos removed, not 2 more added. Adding two more isn't wrong, but it should be balanced without 2s if at all possible.
Bruh I hate science Pls help me
List 5 physical properties of matter.
What is a chemical property?
List 2 chemical properties.
What is the difference between chemical property and chemical change?
List 3 products that are the results of chemical reactions.
Answer:
1. The properties of matter include any traits that can be measured, such as an object's density, color, mass, volume, length, malleability, melting point, hardness, odor, temperature, and more.
2. A chemical property is a characteristic of a particular substance that can be observed in a chemical reaction.
3. Toxicity and acidity.
4. A chemical property describes the ability of a substance to undergo a specific chemical change. A chemical reaction is a process that occurs when one or more substances are changed into one or more new substances.
5. The five basic types of chemical reactions are combination, decomposition, single-replacement, double-replacement, and combustion. Analyzing the reactants and products of a given reaction will allow you to place it into one of these categories. Some reactions will fit into more than one category.
Hope this helps you~
Suppose you wish to determine the order of the reaction. You initially measure a rate, r0, given some arbitrary concentration of reactants. You then proceed to double the amount of A in the reaction (keeping B the same) and find that the rate is now 2r0. In a reciprocal experiment, you double the amount of B (A same as initial) in the reaction and measure a rate of 8r0. What is the order of this reaction
Answer:
See explanation
Explanation:
Now taking A, we can see that if we double the amount of A while keeping the amount of B constant, the rate of reaction doubles, hence we can write;
2^n = 2^1
hence n =1
For B, when the amount of B is doubled while keeping the amount of A constant, the rate of reaction increases eight times. Hence we can write;
2^n = 8
2^n = 2^3
n=3
Hence this reaction has an overall order of 1 + 3 = 4
So we can write;
rate =k[A] [B]^3
Create an atom diagram using the Bohr model. Directions Choose three elements from the following list. Use a periodic table to determine the number of protons, neutrons, and electrons. Draw a diagram of each element you have selected. Use a separate piece of paper for each element. Be sure your drawing is neat, legible, and accurate. Use this data table to record information about each element. Element #1 Element #2 Element #3 Element #4
Answer:
Explanation:
proposed an early model of the atom as a central nucleus containing protons and neutrons being orbited by electrons in shells. As previously discussed, there is a connection between the number of protons in an element, the atomic number that distinguishes one element from another, and the number of electrons it has. In all electrically-neutral atoms, the number of electrons is the same as the number of protons. Each element, when electrically neutral, has a number of electrons equal to its atomic number.
Answer:
You can check diagram with number of proton neutron and electrons
Explanation:
What are the rules for writing
names/formulas for ionic
compounds? Give examples
where you need to produce
the formula from the name
AND the name from the
formula. Make sure to
include examples of
transition metals and
polyatomic ions.
According to the collision theory, which is required for a high number of effective collisions? a very low amount of force from colliding molecules a very low amount of kinetic energy from colliding molecules molecular collisions that have very specific orientations molecular collisions with energy to overcome activation energy
Answer:
the answer is D
Explanation:
i answered c and got it wrong on edg... i hope this helps :)
According to the collision theory, molecular collisions that have very specific orientations are required for a high number of effective collisions.
What is collision theory?Collision theory is used to predict the rates of chemical reactions, particularly for gases.
Based on the collision theory, a high frequency of effective collision is dependent on the molecular collisions that have very specific orientations.
The collision theory suggests that for reactions to occur, there must collision between reacting particles.
The number of collision is dependent on the number of collision per unit time as well as fractions of effective collision.
To attain effective collision, colliding particles must be properly oriented to give the desired product.
Hence, option C is correct.
Learn more about collision theory here:
https://brainly.com/question/20628781
#SPJ2
Which of the following elements in a nonmetal? *
Zinc (Zn)
O Barium (Ba)
Krypton (Kr)
Lithium (Li)
Answer:
Krypton (Kr)
Explanation:
Nonmetals are the elements that have opposing features and characteristics of metals. Nonmetals do not shine and are dull in appearance. They are bad conductors of heat and electricity. They are brittle and cannot be beaten into sheets. The density, melting and boiling points of the nonmetals are low. Krypton (Kr) is a non metal whose atomic number is 36.
What else is produced when sodium carbonate decomposes?
Na2Co3 - Na2O+
Answer:When a single compound breaks down into two or more compounds or elements in a chemical reaction then it is known as decomposition reaction.
The chemical symbol for sodium carbonate is .
The decomposition of sodium carbonate is:
The decomposition of sodium bicarbonate, will result in the formation of sodium oxide, and carbon dioxide, .
Hence, carbon dioxide, will produce with sodium oxide, on decomposition of .
Explanation:Na2CO3 Na2O +CO2 CO2 is the answer
Please help....thank you
Answer:
a. volcanic changes create new land
the initial internal energy of a system is 43.5kj. it absorbs 8.3kj of heat while performing 3.5kj of work on the surroundings. what is its final internal energy?
Shows works to help me understand what I did wrong.
Answer:
[tex]U_2=48.3kJ[/tex]
Explanation:
Hello!
In this case, since the fist law of thermodynamics helps us to understand how the change in internal energy is defined in terms of the head added to the system and the work done by the system:
[tex]Q+W=\Delta U[/tex]
In such a way, since 8.3 kJ of heat are absorbed by the system, 3.5 kJ are done by the system and the initial internal energy is 43.5 kJ, the final internal energy turns out:
[tex]U_2=U_1+Q-W\\\\U_2=43.5kJ+8.3kJ+3.5kJ\\\\U_2=48.3kJ[/tex]
Best regards!
Question 1 (3 points)
(01.01 LC)
Which of the following objects will exert the greatest gravitational force on a box, if the distance between them remains the same? (3 points)
Оа
2 kg mass
Ob
4 kg mass
Ос
6 kg mass
8 kg mass
The following objects will exert the greatest gravitational force on a box⇒ 8 kg mass
Further explanationGravity is a force that arises because of the attraction between objects with mass.
The magnitude of this attraction is proportional to the mass of the object.
The greater the mass of the object, the greater the gravitational force
Relationships can both be stated in
Newton's Gravity Law:
[tex]\rm F=G.\dfrac{m_1.m_2}{r^2}[/tex]
with F = gravitational force,
G = gravitational constant,
m1, m2 = mass of object,
r = distance between two objects.
The distance-r and mass of the box(m₁) are the same, then the largest object's mass (m₂)exerts a large gravitational force, because the gravitational force is directly proportional to the mass of the two objects
HELPPPPPP
is this
1:conduction
2:radiation
3:convection
Answer:
Radiation
Explanation:
Sun rays shine on earth. Thats radiation.
anyways i passed my chemistry final yall. yupp
Explanation:
CONGRATULATIONS!!!!!
Answer:
chemistary more lliek dumastry ahaha
Explanation: