I don't know why not
how does Arizona's climate relate to the air and ocean currents?
Answer: In Arizona, climate change is already making deadly heat waves, droughts and wildfires across the state worse. These impacts have real costs on Arizonans' health and economy, including heat-related deaths, higher electricity bills, crop losses and more.
Explanation:
https://www.edf.org/climate/costofinaction- this is where I gathered this info. Not mine. But I hope it helps!
Which of the following is NOT a type of mucle tissue?
Cardiac
Smooth
Striped
Skeletal
Answer:
Striped should be the answer
what are 2 factors that impact the flow of energy into and out of earths systems
Answer:
Solar energy causes evaporation; uneven heating of the Earth causes air masses to move; Coriolis forces help storms to take shape; and gravity makes rivers flow downhill. Another relevant factor is the high heat capacity (or specific heat) of water.
Explanation:
hoped this helped;)
What is the amount of space that a material takes up ?
volume.
The amount of space a material occupies is its volume.
Mass is measured using a scale. Volume is the amount of space matter takes up. Volume can be measured by multiplying the length, width, and height of an object, or by using a measuring cup and seeing how the measurement of water changes in a cup. Density is the amount of matter an object has in a certain space.
Answer:
Volume
Explanation:
Mass is measured using a scale. Volume is the amount of space matter takes up. Volume can be measured by multiplying the length, width, and height of an object, or by using a measuring cup and seeing how the measurement of water changes in a cup. Density is the amount of matter an object has in a certain space.
What happens when a current is applied to two electrodes immersed in pure water?
A. No electrolysis occurs, and current does not flow.
B. Oxygen, but not hydrogen, is released as a gas.
C. Electrolysis occurs, releasing oxygen and hydrogen gas.
Answer:
b
Explanation:
Gucci ghhvhjhsgjjn hvh
Answer:
B
Explanation:
3.) If you have 784 g of Sulfuric Acid (H2SO4), how many moles of Sulfuric
Acid is that? *
Answer:
98.07848
Explanation:
I assume you are converting between grams H2SO4 and mole. You can view more details on each measurement unit: molecular weight of H2SO4 or mol This compound is also known as Sulfuric Acid. The SI base unit for amount of substance is the mole.
Answer:
8moles
Explanation:
n=m/GFM
n=784/98.02
n=7.998
n=8moles
What is the molality of an acetic acid solution that contains 0.500 mol of HC2H3O2 (molar mass: 60g/mol) in 0.800 kg of water?
Answer: The molality of given acetic acid solution is 0.625 m.
Explanation:
Given: Moles of solute = 0.5 mol
Mass of solvent = 0.8 kg
Molality is the number of moles of solute present in a kg of solvent.
Therefore, molality of the given solution is calculated as follows.
[tex]Molality = \frac{moles}{mass of solvent}[/tex]
Substitute the values into above formula as follows.
[tex]Molality = \frac{moles}{mass of solvent}\\= \frac{0.5 mol}{0.8 kg}\\= 0.625 m[/tex]
Thus, we can conclude that the molality of given acetic acid solution is 0.625 m.
The earth’s _____ creates a cross-current motion that captures the north and south moving air creating a ___ _____?
ANSWER AND YOU WILL BE MARKED BRAINLIEST (NO FILES) :))
Answer:
deflection,Coriolis effect
hope this helps
What causes severe weather to occur?
Answer:
i hope this helps
...............................
A neutral atom has a ground state electron configuration of 1s22s22p63s2.The neutral atom becomes an ion during a chemical reaction.Which is the most likely charge of the ion
Answer:
+2
Explanation:
the atom will acquire the noble gas configuration if it loses 2 electrons, becoming a divalent cation
Butene would have __ carbon atoms and a __ bond
Answer:
Butene would have 4 carbon atoms and a double bond.
Explanation:
The chemical formula for butene is C[tex]_4[/tex]H[tex]_8[/tex]
Here is an image of it.
Answer:
we have
But :4
bond :ene :2
So
Butene would have _4_ carbon atoms and a _2_ bond
A gas with a volume of 250 mL at a temperature of 293K is heated to 324K. What is the new volume of the gas?
Answer:
you can simply answer vl/t1=v2/t2
Which is the right answer
Answer:
NH3
Explanation:
there is one nitrogen and 3 hydrogen
1. What two things reflect some of the incoming solar radiation back out into space?
Answer:
About 29 percent of the solar energy that arrives at the top of the atmosphere is reflected back to space by clouds, atmospheric particles, or bright ground surfaces like sea ice and snow
which statement best describes the difference between weather and climate
a) climate is about the hydrospace, weather is about autosphere
b) climate describes average temperature, weather describes many more factores
c) Climate is long periods of time, weather is short periods of time ( present day)
d) Climate describes conditions at sea level, weather describes conditions at different elevations
WILL MARK BRIANLIEST
Answer:
C
Explanation:
Brainliest
I tried my best
What is the electron configuration of the sodium atom after it loses an electron?
Multiple choice question.
A)
1s22s22p6
B)
[He]2s22p5
C)
1s22s22p63s1
D)
1s22s22p63s1
Answer:
the answer is A 1s22s22p6
The combustion of fuel oil to heat a home is an example of a/an???????
Answer:
Is it multiple choice? you didnt have any choices
Explanation:
Answer:
exothermic reaction
Explanation:
PLEASE HELP ME (JOULES)
Type the correct answer in the box. Round your answer to the nearest whole number.
Dina has a mass of 50 kilograms and is waiting at the top of a ski slope that’s 5 meters high.
The maximum kinetic energy she can reach when she skis to the bottom of the slope is
joules.
Use PE = m × g × h and g = 9.8 m/s2. Ignore air resistance and friction.
Answer:
2450 joules
Explanation:
The formula for potential energy is PE = m x g x h
m is the mass, in kg (50)
g is the acceleration due to gravity, in meters per second squared (9.8)
h is the height, in meters (5)
The problem gives m = 50, g = 9.8, and h = 5. Plug that into the formula and get the answer.
[tex]PE = mgh\\PE = (50) (9.8) (5)\\PE = 2450[/tex]
According to law of conservation of energy and substitution of values in formula gives,2540 joules as maximum kinetic energy.
What is law of conservation of energy?According to law of conservation of energy, it is evident that energy is neither created nor destroyed rather it is restored at the end of a chemical reaction .
Law of conservation of mass and energy are related as mass and energy are directly proportional which is indicated by the equation E=mc².Concept of conservation of mass is widely used in field of chemistry, fluid dynamics.
Law needs to be modified in accordance with laws of quantum mechanics under the principle of mass and energy equivalence.Substitution in formula gives , PE=50×9.8×5=2540 J.
Thus, the maximum kinetic energy she can reach when she skis to the bottom of the slope is 2540 J.
Learn more about law of conservation of energy,here:
https://brainly.com/question/29775341
#SPJ7
What must happen to uranium before it can be used as a fuel source?
A. No changes are necessary.
B. Stable U-235 must be enriched with 3% radioactive U-238.
C. Stable U-238 must be enriched with 3% radioactive U-235.
D. Unstable U-235 must be enriched with 5% U-238 to stabilize it.
Answer:
D
Explanation:
Before it can be used in a reactor for electricity generation, however, it must undergo a series of processes to produce a useable fuel. For most of the world's reactors, the next step in making the fuel is to convert the uranium oxide into a gas, uranium hexafluoride (UF6), which enables it to be enriched.
Unstable U-235 must be enriched with 5% U-238 to stabilize it. Hence, option D is correct.
What is radioactive?Radioactivity is the phenomenon of the spontaneous disintegration of unstable atomic nuclei into atomic nuclei to form more energetically stable atomic nuclei.
Before uranium can be used in a reactor for electricity generation, however, it must undergo a series of processes to produce a useable fuel.
For most of the world's reactors, the next step in making the fuel is to convert the uranium oxide into a gas, uranium hexafluoride (UF6), which enables it to be enriched.
Hence, option D is correct.
Learn more about radioactive here:
https://brainly.com/question/1770619
#SPJ2
If we were to add a piece of solid Cu to an aqueous solution (in water) of silver nitrate, the Silver would be replaced in a single replacement reaction forming aqueous copper (II) nitrate and solid silver. How much silver, in grams, is produced if 15.00 grams of Cu is added to the solution of silver nitrate
Answer:
50.9 g of Ag
Explanation:
Reaction is:
Cu (s) + 2AgNO₃(aq) → 2Ag (s) + Cu(NO₃)₂ (aq)
1 mol of Cu react to 2 moles of silver nitrate in order to produce 2 moles of solid silver and 1 mol of copper (II) nitrate.
We assume, the silver nitrate in excess.
We determine moles of copper → 15 g . 1mol / 63.55 g = 0.236 moles
Ratio is 1:2. 1 mol of copper produce 2 moles of silver
0.236 moles of Cu will produce (0.236 . 2) / 1 = 0.472 moles of Ag
We deterine mass of silver:
0.472 mol . 107.87 g /mol = 50.9 g
Use the information provided in the table to
determine the K, for methylammonium ion, the
conjugate acid of methylamine.
X6.8 x 10-19
4.4 x 1010
2.8 x 109
2.3 x 10-11
Answer: D
Explanation:
2.3x10-11
Answer:
D. 2.3 x 10^-11
Explanation:
Look at the image below
Calculate the mass percent for a solution of 6.5 g KOH in 250 g water
Answer:
2.53%
Explanation:
mass percent = (mass of solute/mass of solution)×100%
mass percent = [6.5 g/(6.5 + 250) g]×100% = 2.53%
If 5.60 mol of a substance releases 14.9 kJ when it decomposes, what is ΔH for the process in terms of kJ/mol of reactant?
Answer:
The correct approach is "-2.67 kJ/mole". A further solution is described below.
Explanation:
The given values are:
No. of moles,
= 5.60 mol
Substance releases,
ΔH = 14.9 kJ
Now,
The ΔH in terms of kJ/mol will be:
= [tex]\frac{\Delta H}{5.60}[/tex]
On putting the given values of ΔH, we get
= [tex]\frac{-14.9}{5.60}[/tex]
= [tex]-2.67 \ kJ/mole[/tex]
A sample of nitrogen gas in a 750.0 mL sealed flask exerts a pressure of 206.58 kPa. Calculate the temperature of the gas if the flask contains 3.00 grams of gas.
Answer:
T= -99 °C.
Explanation:
Hello there!
In this case, according to the given description of the problem, it is possible for us to analyze this problem via the ideal gas equation:
[tex]PV=nRT[/tex]
However, we first calculate the moles in 3.00 grams of nitrogen gas (28.01 g/mol):
[tex]n=3.00g*\frac{1mol}{28.01g}=0.107mol[/tex]
Next, we solve for the temperature as shown below:
[tex]T=\frac{PV}{Rn}[/tex]
Next, we convert the given pressure and volume to atm and L to obtain:
[tex]T=\frac{(206.58atm/101.325)*750.0L/1000}{0.08206\frac{atm*L}{mol*K}*0.107mol}\\\\T=174.15K-273.15\\\\T=-99\°C[/tex]
Regards!
what does the prefix non-represent?
1.) 9 carbon atoms, only
2.) 9 carbon atoms and 20 hydrogen atoms
3.) 9 carbon atoms and 18 hydrogen atoms
4.) 9 carbon atoms and 16 hydrogen atoms
Answer:
1.) 9 carbon atoms, only
Explanation:
Prefix: non- simply means 9.
Suffix: -ene means double bond, -yne means triple bond, and -ane means single bonded carbons.
Answer:
1st option
Explanation:
it means 9 carbon atoms omly
What color does blue brown and red make
Answer:
dark brown with a hint of purple
have a good day :)
Explanation:
which type of bonding involves sharing valence electrons, but the valence electrons aren't confined to a specific region between atoms and instead exist throughout the crystal structure of the material?
Answer:
metallic bonding
Explanation:
Metallic bonding is bonding where electrons exist as "sea of electrons" meaning they can go anywhere in the structure and are not localized in specific place like covalent bonds are sometimes.
Mg + 2HCl → MgCl2 + H2
How many grams of Mg is needed to produce 100 g of H2?
H2
n=m÷Mr
n=100×2
n=200 moles
Mole ratio
Mg : H2
1 : 1
x : 200
cross multiply= x=200
Mg
make m the subject
m=n×Mr
m=200×24.305
m=4861 g
Which of the following relationships is true?
A. pH − pOH = 14
B. Ka × Kb = 1 × 10-14
C. pKa × pKb = 14
D. pKa × pKb = 1 × 10-14
Answer:
D. pKa × pKb = 1 × 10-14
Explanation:
hope this helps, if not, give me time to edit
Answer:
B. Ka × Kb = 1 × 10-14
Explanation:
yw
Covalent bonding occurs when... a electrons are shared between atoms b cations attract to anions c protons fuse in the nucleus d electrons are transferred between atoms
Answer: Covalent bonding occurs when electrons are shared between atoms. The correct option is A.
Explanation:
When atoms form a bond by sharing one or more pairs of electrons the bond is referred to as a COVALENT BOND. This is so because CV there is a natural drive for atoms to attain the electronic configuration of Group 0 which has a completely filled outermost shell of eight electrons. The covalent bond usually occurs among non- metals. Example of covalent bonding is seen in the formation of chlorine and carbondioxide molecules. Chloride atom which contains seven electrons in its outermost shell shares an electron with another chloride atom to attain a filled outermost shell leading to the formation of a chlorine molecule.
The characteristics of a covalent compound includes:
--> they contain only molecules. There are no ions, hence they do not conduct electricity.
--> they dissolve in organic solvents. They are insoluble in water.
--> they have low melting and boiling points.