Compose the cathode and anode processes of electrolysis of an aqueous solution Li2SO4, the total electrolysis equation

The  colour change when nitric acid is added to the mixture of universal indicator and water can range from yellow/orange to red/dark red.

When nitric acid is added to a mixture of water and universal indicator, the color change depends on the concentration of the acid.

At low concentrations of nitric acid, the universal indicator will turn yellow or orange, indicating a slightly acidic solution. As the concentration of nitric acid increases, the color will shift towards red, indicating a more acidic solution. At very high concentrations, the solution may turn dark red, indicating a strongly acidic solution.

The reason for this color change is that universal indicator is a pH indicator that contains a mixture of dyes that change color depending on the pH of the solution. Nitric acid is a strong acid that dissociates completely in water, producing H+ ions that lower the pH of the solution. As the pH decreases, the color of the universal indicator changes from green to yellow to orange to red.

Therefore, the color change when nitric acid is added to a mixture of water and universal indicator depends on the concentration of the acid and can range from yellow/orange to red/dark red.

Learn more about universal indicator below.

https://brainly.com/question/2953080

#SPJ1

The molarity of the solution is 1.253 M.  To find the molarity of the solution, we first need to calculate the number of moles of CuSO4 in the solution.

The molar mass of CuSO4 is

63.55 + 32.07  + (4 x 16.00 ) g/mol  = 159.62 g/mol.

Next, we can use the equation moles = mass / molar mass to find the number of moles of CuSO4 in the solution.  

Moles of CuSO4 = 40.00 g / 159.62 g/mol = 0.2506 mol

Finally, we can use the equation molarity = moles / volume to find the molarity of the solution.

The volume of the solution is 200.0 mL, or 0.2000 L.

Molarity = 0.2506 mol / 0.2000 L = 1.253 M

Therefore, the molarity of the solution is 1.253 M.

For more question on molarity click on

https://brainly.com/question/30404105

#SPJ11

If you want a solution that is less than saturated, the amount of HCl needed is less - in this case, 27.5g.

Saturated refers to a state of being filled to capacity or having reached its maximum level. In chemistry, it is used to describe a molecule or compound that has all its available bonds filled with either single or multiple bonds. It is a state of maximum solubility, meaning that no more of a substance can dissolve in a given solvent. In physical science, it can also refer to the highest temperature where a substance can exist in the liquid state without boiling.

The amount of HCl required to make a solution with 100g of water saturated at 60 degrees C depends on the concentration of the HCl solution you are trying to make. If you want to make a saturated solution, the maximum amount of HCl that can be dissolved in 100g of water at 60 degrees C is 55g. If you want a solution that is less than saturated, the amount of HCl needed is less - in this case, 27.5g.

To learn more about saturated
https://brainly.com/question/388072
#SPJ1

The two properties are used to identify clouds are atmospheric height and how they look like.

Often, factors like a cloud's height in the skies, texture, and the kind of "weather" it produces or doesn't generate are used to classify and identify it.

Thus, the two properties are used to identify clouds are atmospheric height and how they look like.

Know more about clouds and its formations

https://brainly.com/question/2941398

#SPJ1

Answer:

Here are the names of the esters and the corresponding alcohols and carboxylic acids that were used to make them:

1. Ethyl acetate, made from ethanol and acetic acid

2. Methyl propanoate, made from methanol and propanoic acid

3. Butyl butyrate, made from butanol and butyric acid

4. Octyl formate, made from octanol and formic acid

5. Ethyl benzoate, made from ethanol and benzoic acid

6. Ethyl propionate, made from ethanol and propanoic acid

7. Methyl butyrate, made from methanol and butyric acid

8. Ethyl butyrate, made from ethanol and butyric acid

9. Propyl formate, made from propanol and formic acid

10. Butyl propionate, made from butanol and propanoic acid.

The element with lowest electronegativity, based on periodic trends, is Li. An atom's electronegativity is measured.

Atomic radius, ionisation energy, electron attraction, electronegativity, valency, and metallic nature are important periodic trends. Due to the periodic nature of the elements and their similar electrical configurations within their various groups or periods, these tendencies are present.

The number of protons on the nucleus, the number of energetic levels, & the shielding effect are three variables that aid in the prediction of trends in the periodic table. In any group, the atomic radii get larger from top to bottom.

To know more about periodic trends visit:

https://brainly.com/question/12074167

#SPJ1

The molarity of NaOH when 39.99 g NaOH was dissolved in 0.2 L of water is 5 M.

Molarity is a measure of the concentration of a solute in a solution, defined as the number of moles of the solute per liter of the solution. A mole is the amount of a substance that contains the same number of entities as there are atoms in 12 grams of carbon-12.

For example, if you dissolve one mole of a solute in one liter of a solution, you have a one-molar solution (1 M).

The formula for molarity is, Molarity (M) = Moles of solute / Volume of solution (in liters)

The number of moles of NaOH in 1 L of water is calculated as follows:

Weight of NaOH = 39.99 g

The molar mass of NaOH = 39.99 g/mol (As said that 39.99 g of NaOH makes 1 molar solution)

The number of moles of NaOH = weight / molar mass = 39.99/39.99 = 1 mol

Molarity = the number of moles/volume of solution in liters

Molarity = 1mol / 1 L = 1 M

If 39.99 g of NaOH is dissolved in 0.2 L of water, we can calculate the molarity as follows:

Weight of NaOH = 39.99 g

The molar mass of NaOH = 39.99 g/mol

The number of moles of NaOH = weight / molar mass = 39.99/39.99 = 1.0 mol

Molarity = the number of moles/volume of solution in liters

Molarity = 1 mol / 0.2 L = 5 M

Therefore, the molarity of NaOH is 5 M.

To know more about molarity, refer here:

https://brainly.com/question/8732513#

#SPJ11

One potential source of error could be a measurement error, either in the volume of water added or in the temperature of the water. Another potential source of error could be a problem with the calibration of the thermometer used to measure the temperature of the water.

However, one of the most likely sources of error in this case is the presence of air bubbles in the erlenmeyer flask during the experiment. Air bubbles can act as an insulator, trapping heat and preventing the water from reaching the same temperature as the rest of the water in the flask. This can result in an inaccurate measurement of the water's temperature and ultimately affect the calculation of the experimental data.

To reduce the impact of air bubbles in future experiments, it is recommended to ensure that the erlenmeyer flask is thoroughly cleaned and free of any debris or contaminants that may trap air bubbles. Additionally, carefully swirling the flask during the heating process can help to dislodge any trapped air bubbles and ensure that the water is evenly heated.

To learn more about flask refer to:

brainly.com/question/15175183

#SPJ4

Answer:

Explanation:

The total number of atoms in the reactants can be determined by counting the atoms on each side of the equation.

On the left side, there are:

6 carbon atoms (C)

12 hydrogen atoms (H)

6 oxygen atoms (O)

On the right side, there are:

6 carbon atoms (C)

12 hydrogen atoms (H)

18 oxygen atoms (O)

Therefore, the reactants contain a total of:

6 + 12 + 6 = 24 atoms (of carbon, hydrogen, and oxygen)

Answer: 24 atoms

The mistake is made in step 1.

2C4H10 + 13 O2 → 8 CO2 + 10 H2O

From the equation, we see that 2 mole of butane reacts with 13 moles of oxygen to produce 10 moles of water.

First, we need to convert the given mass of water to moles:

1500 g H2O ÷ 18.015 g/mol H2O = 83.284 mol H2O

Next, we can use stoichiometry to calculate the moles of butane required to produce this amount of water:

83.284 mol H2O × 2 mol C4H10 ÷ 10 mol H2O = 16.657 mol C4H10

Finally, we can convert moles of butane to grams:

16.657 mol C4H10 × 58.12 g/mol C4H10 = 967.79 g C4H10

Thus, the mistake in the calculation was made in the first step where the given mass of water is to be converted to moles.

More on stoichiometric problems can be found here: https://brainly.com/question/28297916

#SPJ1

The batter was then transferred to a baking dish and placed in the oven for the required baking time.

What is Carbon dioxide?

Carbon dioxide (CO2) is a colorless, odorless gas that is naturally present in the Earth's atmosphere. It is composed of one carbon atom bonded to two oxygen atoms, and is a byproduct of respiration, combustion, and other chemical reactions. CO2 is important for plant growth and is also a greenhouse gas, contributing to the warming of the Earth's atmosphere.

To prepare the cake batter, two eggs were cracked into a mixing bowl and beaten thoroughly. Next, a suitable amount of oil and water were added to the mixture. The cake mix was then slowly added and stirred until it formed a homogeneous mixture.

Learn more about Carbon dioxide from the given link

https://brainly.com/question/25385913

#SPJ1

The experiment would produce 102.18 g of ammonia. The answer is closest to 102 g NH₃.

The balanced chemical equation for the reaction is:

N₂(g) + 3H₂(g) → 2NH₃(g)

In this equation, the stoichiometric ratio of nitrogen gas to ammonia gas is 1:2. Accordingly, 2 moles of ammonia gas are created for every 1 mole of nitrogen gas that reacts.

As a result of using 3 moles of nitrogen gas, Brett will generate 2 x 3 = 6 moles of ammonia gas.

From the equation, we can see that for every 1 mole of nitrogen gas (N₂) used, 2 moles of ammonia (NH₃) will be produced. Therefore, if 3 moles of N₂ is used, the number of moles of NH₃ produced will be:

moles of NH₃ = (3 moles N₂) x (2 moles NH₃ / 1 mole N₂) = 6 moles NH₃

To calculate the mass of NH₃ produced, we need to use its molar mass, which is 17.03 g/mol. Therefore:

mass of NH₃ = (6 moles NH₃) x (17.03 g/mol) = 102.18 g NH₃

So, the experiment would produce 102.18 g of ammonia. The answer is closest to 102 g NH₃.

learn more about ammonia here

https://brainly.com/question/14854495

#SPJ1

The possible values of the quantum numbers are:

Orbital shape quantum number l: 0, 1, 2, 3, 4, or 5.

Magnetic quantum number m: -l to +l.

Spin quantum number, s: +1/2 or -1/2.

For the principal quantum number n = 6, the possible values of the azimuthal (orbital shape) quantum number l are 0, 1, 2, 3, 4, and 5.

The magnetic quantum number m can have values ranging from -l to +l, inclusive.

The spin quantum number, s can be either +1/2 or -1/2.

So, the valence electrons in an atom with principal quantum number n = 6 can have the following quantum numbers:

Azimuthal quantum number, l can be 0, 1, 2, 3, 4, or 5.

Magnetic quantum number, m can range from -l to +l, inclusive.

Spin quantum number, s can be either +1/2 or -1/2.

Learn more about quantum numbers at: https://brainly.com/question/2292596

#SPJ1

[tex] \mathbb{ANSWER:}[/tex]

A beam of light distinguishes a colloid from a solution. The particles in a colloid will scatter light, making the beam visible.

The percent yield of the reaction is 37.2%. The theoretical yield, or maximum amount of product that can be produced based on the amount of limiting reagent utilized in the reaction, must first be ascertained in order to calculate the percent yield.

In chemistry, the percentage yield is used to compare the actual outcome of a reaction to the maximum outcome anticipated.

Several institutions place a high value on yield because past yield data enables them to forecast the number of students they will need to accept to order to reach their enrollment goal. Fewer pupils may be admitted if the school's yield rates historically have been high.

We can use stoichiometry to calculate the theoretical yield of p-nitro-toluene:

1 mole of toluene produces 1 mole of p-nitro-toluene

The molar mass of toluene is 92.14 g/mol, and the molar mass of p-nitro-toluene is 137.14 g/mol.

550.0 g of toluene is equivalent to 5.97 moles (550.0 g / 92.14 g/mol).

Therefore, the theoretical yield of p-nitro-toluene is:

5.97 moles of p-nitro-toluene = 5.97 moles of toluene

5.97 moles of p-nitro-toluene x 137.14 g/mol = 819.9 g

we can calculate the percent yield:

Percent yield = (actual yield / theoretical yield) x 100%

In the given experiment, the actual yield of p-nitro-toluene is 305 g.

Percent yield = (305 g / 819.9 g) x 100% = 37.2%

To know more about the percent yield visit:

https://brainly.com/question/19734683

#SPJ1

Answer:

Filtration

Explanation:

Sand can be separated by filtration. Then, salt can be separated by evaporating the salt solution in water. Water can be recovered by condensation.

pls mrk me brainliest

Answer:

decantation and evaporation

Explanation:

Gasoline can have potential energy because it is stored in a container, chemical energy because of the energy stored in its molecular bonds, and thermal energy because of the heat produced when it is burned.

Gasoline is a fuel that contains potential, chemical, and thermal energy.

Potential energy is the energy that an object has due to its position or configuration. In the case of gasoline, it has potential energy because it is stored in a tank or container and has the potential to be used as fuel for a car or other combustion engine.

Chemical energy is the energy that is stored in the bonds between atoms and molecules. Gasoline has chemical energy because it is made up of molecules that contain stored energy in the form of chemical bonds. When gasoline is burned in an engine, the chemical energy is released and converted into thermal energy.

Thermal energy is the energy that is related to the temperature of a substance. When gasoline is burned in an engine, it produces thermal energy as a result of the chemical reactions that take place. This thermal energy is then converted into mechanical energy that powers the car's engine.

In summary, gasoline can have potential energy because it is stored in a container, chemical energy because of the energy stored in its molecular bonds, and thermal energy because of the heat produced when it is burned. These three forms of energy are all interrelated and can be converted from one form to another.

Read more on thermal energies here:https://brainly.com/question/19666326

#SPJ1

Answer:

The Chernobyl disaster of 1986 was a nuclear accident that had a significant impact on the environment and the living organisms in the surrounding area. The abiotic factors, including radiation and temperature changes, had a profound impact on the biotic factors, including plants and animals.

Radiation: One of the primary abiotic factors that impacted the biotic factors in Chernobyl was radiation. The explosion at the nuclear reactor released large amounts of radioactive material into the environment, which had a devastating impact on the plants and animals in the area. Many of the trees and plants in the surrounding forests died, and the animals that ate these plants were also affected. The radiation also caused genetic mutations in many of the organisms in the area.

Soil: The soil in the area was also impacted by the radiation, which caused changes in the nutrient levels and pH levels. This made it more difficult for plants to grow and survive in the area, and it also impacted the animals that depended on these plants for food.

Temperature: The temperature in the area was also impacted by the radiation, which caused changes in the weather patterns. The increased levels of radiation also caused higher temperatures in the area, which made it more difficult for plants and animals to survive.

Overall, the abiotic factors, including radiation, soil, and temperature changes, had a significant impact on the biotic factors in Chernobyl. Many of the plants and animals in the area were negatively impacted, and the ecosystem in the surrounding area was altered in ways that are still being studied today.

Answer:

The PH is 2.66 of the titration solution after 2.19 ml of the naoh was added if the ka of acetic acid is 1.8 x 10-5

Explanation:

The pH of the resulting solution is 8.57. In terms of moles/liter, pH is the negative logarithm of the concentration of hydrogen ions. pH expresses the nature of the solution (acidic, alkaline or neutral).

Number of HCN moles equals molarity * volume in L.

                                 = 0.337(0.15) = 0.05055 moles

Number of NaCN moles = molarity * volume in L.

                                   = 0.344(0.15)   =0.0516 moles

HCN's Pka is 9.31.

PH   = Pka + log [NaCN]/[HCN]

        = 9.31 + log0.0516/0.05055

        = 9.31 + 0.00893    = 9.319

After adding 0.0359 moles of HCL, the number of moles of HCN is equal to 0.05055 + 0.0359, = 0.08645 moles.

After adding 0.0359 moles of HCl, the number of moles of NaCN is equal to 0.0516-0.0359 moles, = 0.0157 moles.

PH = PKa + log [NaCN]/[HCN] = 9.31 + log [0.0157/0.08645] = 9.31 -0.74086 = 8.57

Learn more about pH here:

https://brainly.com/question/13885794

#SPJ4

While the circular portion of this solar eclipse is not visible in Quito, a partial solar eclipse can be seen there.

A partial eclipse happens when the Sun and Moon are only partly blocked from Earth's view by the Moon. Typically, a sizable portion of the planet's surface outside of an annular or complete eclipse can observe this occurrence.

However, because the umbra travels above the polar areas of the Earth and never touches the Earth's surface, some eclipses can only be seen as partial eclipses. Since it requires well over 90% coverage to observe any dimming of the Sun's brightness, partial eclipses are essentially undetectable. It wouldn't be any dimmer than civil dusk even at 99%.

Learn more about eclipse

https://brainly.com/question/4279342

#SPJ1

The energy released when 1 kg of water vapor condenses into 1 kg of liquid water is known as the heat of condensation, and it has a value of 2,260 kJ/kg. This means that for every kilogram of water vapor that condenses, 2,260 kJ of energy is released as heat.

How to calcalculate total amount of heat?

To calculate the total amount of heat released by the condensing water from Hurricane Isabel, we first need to know the total amount of water that was present in the hurricane. Once we have this value, we can multiply it by the heat of condensation (2,260 kJ/kg) to find the total amount of heat released.

For example, if the total amount of water from Hurricane Isabel was 1,000 kg, then the total amount of heat released would be:

Total heat released = 2,260 kJ/kg x 1,000 kg = 2,260,000 kJ

Therefore, the total amount of heat released by the condensing water from Hurricane Isabel depends on the amount of water that was present in the hurricane, and we need this information to make a specific calculation.

To learn more about energy, visit: https://brainly.com/question/28324294

#SPJ1

According to a first-order rate law with a rate constant of 0.0058 min1, the reaction requires a concentration of iodide of about 4.83 mM before the color changes after 12 minutes.

The demonstration in the movie shows that larger iodide ion concentrations accelerate the first reaction, hastening the depletion of thiosulfate. Because of this, the reaction's end-signaling color shift happens faster.

rate = k[I-]

[I-] = rate / k

Plugging in the given rate (0.028 mM/12 min), we get:

[I-] = (0.028 mM/12 min) / k

[I-] = (0.028 mM/12 min) / (0.0058 min⁻¹)

[I-] ≈ 4.83 mM

To know more about rate constant visit:-

https://brainly.com/question/20305922

#SPJ1

Answer: 86.68 grams KOH or 86.7 g KOH to correct sig figs

Explanation:

M= moles/L

moles = MXL

moles = 2.84 X 0.545 = 1.55 moles now multiply by the molar mass of KOH

which is 56 (from the periodic table) =

Mass of rock = 5004.16kg. The mass of the elements present in the compound determines the percentage composition.

Given that the [tex]Fe_{2} O_{3}[/tex] is 80 % by mass.

It means that 80 kg of is present in 100 kg of rock

To find the mass of rock which contains 2800 kg of iron

2800 kg = 2800*1000 g

2 moles of iron are present in 1 mole of

Molar mass of iron = 55.845 g/mol

Mass of 2 moles = 55.845 * 2 = 111.69 g/mol

159.69 g/mol Molar mass of [tex]Fe_{2} O_{3}[/tex]

It implies,

In 159.69 g of iron, there are 111.69 g.

The amount of iron in 159.69/111.69 g of

There are 2800*1000 g in (159.69/111.69) *2800*1000 g of material.

Mass of [tex]Fe_{2} O_{3}[/tex] = 4003.33kg

Thus,

100 kg of rock contains 80 kg.

One kilogram of rock makes up 100/80 kg.

(100/80) *4003.33 kg of rock contains 4003.33 kg.

Mass of rock = 5004.16kg

Learn more about mass here:

https://brainly.com/question/13595551

#SPJ4

The aluminum bar is cooling through an exothermic process, which means that heat is being released from the bar and being transported to the surroundings. This is indicated by the negative sign of the heat change.

The aluminum bar is cooling through an exothermic process, which means that heat is being released from the bar and being transported to the surroundings. This is indicated by the negative sign of the heat change (-14.2 kJ). This is due to the metal bar losing heat as it cooled down because the ultimate temperature (25.0°C) is lower than the initial temperature (70.0°C).

we can use the formula:

Q = m * c * ΔT

where Q = heat change, m = mass of the aluminum bar, c = specific heat capacity of aluminum, and ΔT = change in temperature.

The specific heat capacity of aluminum is 0.903 J/g·°C.

So, plugging in the values, we get:

Q = (350.0 g) * (0.903 J/g·°C) * (25.0°C - 70.0°C)

Q = -14,175 J

The negative sign indicates that heat is being lost by the aluminum bar,

To convert -14,175 J to kJ, we divide by 1000:

-14,175 J = -14.175 kJ

Rounding to one decimal place, we get:

-14.175 J ≈ -14.2 kJ

To know more about the exothermic change visit:

https://brainly.com/question/30802821

#SPJ1

If you had [tex]9.65 * 10^{26[/tex] atoms of Ag, you would have [tex]1.603 * 10^3[/tex] moles of Ag.

To find the number of moles of Ag atoms you have, you need to use Avogadro's number, which is 6.022 x 10^23. This number represents the number of atoms in one mole of any substance.
To find the number of moles, you need to divide the number of atoms you have by Avogadro's number:
Number of moles = Number of atoms / Avogadro's number
Plug in the given values:
Number of moles = 9.65 x 10^26 atoms / 6.022 x 10^23 atoms/mole
Simplify:
Number of moles = 1.603 x 10^3 moles
So, if you had 9.65 x 10^26 atoms of Ag, you would have 1.603 x 10^3 moles of Ag.

For more question on Avogadro's number click on

https://brainly.com/question/12049381

#SPJ11

Dimethylglyoxime is a chemical that is present in this kit (in solution). KIT The solution will turn pink when used to clean a metal object with such a cotton swab when nickel is present in the Penelope's 14k white gold ring.

White gold was first created to mimic platinum (a white metal). White gold is typically an alloy containing around 75% gold or around 25% nickel and zinc. It would be approximately 75% pure gold if it had an 18 karat stamp.

The question:

Joe, a friend of Penelope's, presents her with a 14k white gold ring on Valentine's Day. Daksha, a friend of Penelope's, believes it is truly made of nickel. Penelope may use the following procedure or experiment to determine this for sure:

Know more about white gold

https://brainly.com/question/4348678

#SPJ1